OWNER'S MANUAL
OWNER’S
DISHWASHER
WASHING
MACHINE
Please read this manual carefully before operating
your dishwasher.
Retain
for future
reference.
set and retain
it for itfuture
reference.
­ 1455W(L,M,T,B,C,D,A)F(B,U)
D
WM0642H*
D1454W(L,M,T,B,C,D,A)F(B,U)
D1465W(L,M,T,B,C,D,A)F(B,U)
D1464W(L,M,T,B,C,D,A)F(B,U)
DW-TS610S / DW-TS610T / DW-TS610W
DW-TS605T / DW-TS605W
P/No.
P/NO :: MFL66281401
MFL31245123
www.lg.com
C
ONTENTS
SAFETY AND CAUTION
3
INSTALLATION INSTRUCTIONS
5
PARTS NAME
9
FUNCTION OF CONTROL BUTTON
10
BEFORE USING FOR THE FIRST TIME
15
INFORMATION FOR ENERGY TEST
17
HOW TO USE AND OPERATE
18
OPERATING SEQUENCE
26
PROGRAMME
27
USER MAINTENANCE INSTRUCTIONS
28
TROUBLE SHOOTING GUIDE
29
SPECIFICATION
33
2
S
AFETY AND CAUTION
IMPORTANT SAFETY INSTRUCTIONS
WARNING - When using your dishwasher, follow basic precautions, including the following:
• Please read this manual carefully before using
the dishwasher for the first time.
• T
his manual contains very important notes
regarding the installation, use and maintenance
of your dishwasher.
• The manufacturer can not be responsible for
problems caused by ignoring these safety and
caution instructions.
• This dishwasher is designed for normal
household use.
• Do not use the dishwasher for industrial and
commercial use, or other purpose.
• The appliance is not intended for use by young
children or infirm persons without supervision.
• Check packaging and dishwasher immediately
for signs of transport damage. If the appliance is
damaged, do not put it into use but contact your
supplier without delay.
• This appliance is intended to be used in
household and similar applications such as;
- Staff kitchen areas in shops, offices and other
working environments;
- Farm houses;
- By clients in hotels, motels and other
residential type environments;
- Bed and breakfast type environments.
• If this product is used for commercial purpose, it
is not warranted.
(Example: Public places such as restaurant,
lodging house, training center, dormitory)
If the product is installed outside the normal
service area, any cost of transportation involved
in the repair of the product, or the replacement
of a defective part, shall be borne by the owner.
or a similar qualified person in order to avoid a
hazard.
• This appliance must be positioned so that the
plug is accessible.
• The appliance is to be connected to the water
mains using new hose-sets and that old hose-sets
should not be reused.
■ During use
• Only suitable household utensils should be
placed in the dishwasher.
(Please avoid utensils; that are non-heatresistant, metal decorated, etc.)
•D
o not use any kinds of solvent in your
dishwasher. They may cause an explosion or fire.
• Do not spray water on the appliance.
It may cause the failure of electric parts or
electric shock.
• Do not push down or sit on the inner door when
the door is opened. It may cause the deformation
or failure of your dishwasher.
• Do not use the detergent for hand washing.
The detergent for dishwasher should be used for
normal operation.
• This appliance is fitted with a safety function
that automatically stops the operation of the
dishwasher when it is exposed to heavy
disturbance on its mains.
• Dishwasher detergents are strongly alkaline.
They can be extremely dangerous if swallowed.
Avoid contact with skin and eyes and keep
children away from the dishwasher when the
door is open.
Check that the detergent receptacle is empty
after completion of the wash cycle.
■ During installation
• Electrical connection must be in accordance
with the rating label.
• Electrical safety is only guaranteed when the
earth system of your house is in accordance with
the related local regulations.(Do not use an
extension cable or cord.)
• If the hot water exceeds 65ºC, adjust the water
heater setting. If the hot water temperature can
not be maintained below 65ºC, the dishwasher
must be connected to cold water.
• If power supply cord is damaged, it must only be
replaced by the manufacturer or its service agent
■ Child Safety
• Controls may be locked using Child Lock mode
to prevent all the settings from being changed by
a child.
•K
eep children away from detergents and rinse-aids.
• Do not allow children to operate the dishwasher.
• Young children should be supervised to ensure
that they do not play with the appliance.
■All batteries (whether installed or attached)
should not be exposed to excess heat like
sunlight or similar source.
3
S
AFETY AND CAUTION
CAUTION
Concerning the Power Cord
It is recommended that most appliances placed upon a dedicated circuit; that is, a single outlet
circuit which powers only that appliance and has no additional outlets or branch circuits. Check the
specification page of this owner's manual to be certain.
Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension
cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these
conditions could result in electric shock or fire. Periodically examine the cord of your appliance,
and if its appearance indicates damage or deterioration, unplug it, discontinue use of the
appliance, and have the cord replaced with an exact replacement part by an authorised servicer.
Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched,
closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point
where the cord exits the appliance.
CAUTION
The instructions shall state the substance of the following :
his appliance is not intended for use by persons (including children) with reduced physical,
T
sensory or mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
SAVE THESE INSTRUCTIONS
GROUNDING INSTRUCTIONS
This appliance must be grounded. In the event of a malfunction or breakdown, grounding will
reduce the risk of electric shock by providing a path of least resistance for electric current. This
appliance is equipped with a cord that has an equipment grounding conductor and a grounding
plug. The plug must be plugged into an appropriate outlet that is installed and grounded in
accordance with all local codes and ordinances.
WARNING - Improper connection of the equipment-grounding conductor can result in a risk of
electric shock. Check with a qualified electrician or service representative if you are in doubt
whether the appliance is properly grounded. Do not modify the plug provided with the appliance;
if it will not fit the outlet have a proper outlet installed by a qualified electrician.
Disposal of your old appliance
1. W
hen this crossed-out wheeled bin symbol is attached to a product
it means the product is covered by the European Directive
2002/96/EC.
2. All electrical and electronic products should be disposed of
separately from the municipal waste stream via designated
collection facilities appointed by the government or the local
authorities.
3. The correct disposal of your old appliance will help prevent
potential negative consequences for the environment and human
health.
4. F
or more detailed information about disposal of your old appliance,
please contact your city office, waste disposal service or the shop
where you purchased the product.
4
I
NSTALLATION INSTRUCTIONS
WARNING
A qualified electrician/plumber or competent person should carry out any electrical/plumbing
work required to install this appliance.
Step 1 :
Step 2 :
PREPARE CUPBOARD OPENING
PREPARATION FOR ELECTRICAL WIRING
CAUTION
1 T
his dishwasher is designed to fit the size
shown as below.
For personal safety, remove house
fuse or open circuit breaker before
installation. Do not use an
extension cord or adapter plug with
this appliance. Electrical and
earthing connections must comply
with the national electrical code/
provincial and municipal code and/
or other local codes.
2 S
elect a location as close to sink as
possible for ease of connection to the
water and drain pipes.
3 T
o ensure good drainage, the dishwasher
should not be installed more than 3 meters
away from the sink.
4 I f dishwasher is installed in a corner, a
minimum of 5cm of space is required
between the washer and an adjacent
cabinet or wall.
1 This appliance must be supplied with
correct rating voltage and hertz as shown
on instruction manual, and connected to
an individual, properly earthed branch
circuit, protected by a minimum 15 amp
circuit breaker or time delay fuse.
Wiring must be 2 wires with Earth.
2 The power plug must be in a accessible
location adjacent to and not behind the
dishwasher and within 1.2 meters of the
dishwasher side.(See page 7 Fig.A)
3 The power plug must be correctly
earthed, if in doubt, have it checked by a
qualified Electrician. No other appliance
should be connected to the same plug
outlet by a double adapter or similar
plug.
Dangerous voltage
Unit:mm
To indicate hazards arising
from dangerous voltages.
Note- in case of an
application warning sign, the
rules according to ISO 3864
should be adhered to.
Any bare wood surrounding the
dishwasher should be sealed with a
waterproof paint or sealant to prevent
swelling.
5
I
NSTALLATION INSTRUCTIONS
Step 4 :
Step 3 :
INSTALLING THE
DISHWASHER IN CUPBOARD
PREPARING THE DISHWASHER
FOR INSTALLATION
1 L
ay the dishwasher on its back.
1 Before sliding the dishwasher into the
cupboard opening, all necessary height
and balancing adjustments should be
made using a spanner.
2 A
djust the legs to the required height
as shown in below figure.
2 Slide the dishwasher into the cabinet,
opening carefully. Make sure that the
drain hose inside the cabinet is not
kinked or stretched.
Adjust
leg
CAUTION
If the height of the cupboard is below
850mm, you should remove the top
table by unscrewing the 2 screws.
(Two from rear)
3 T
o reduce noise attach the strip to the
machine base.
Remove the adhesive
cover and attach the strip
to the machine base,
hiding the legs.
Trim the edges if desired.
The bottom of the strip
should touch the floor.
6
I
NSTALLATION INSTRUCTIONS
Step 5 :
■ When the drain hose is connected to a
separate standpipe, it is essential that an
airtight connection be made.
Refer to Fig.B
INSTALLATION OF DRAIN HOSE
1 I f the end of drain hose does not fit to
the drain line, use a rubber
connector(not supplied) that is
resistant to heat and detergent.
2 T
his should be available from a
plumbing shop or DIY merchants.
3 T
here are two typical connections as
shown in Figure A, B.
The S trap spigot must be drilled out cleanly
and free of obstruction to its maximum
internal diameter, if used for drainage.
To prevent siphoning, one of the following
methods must be used:
Fig. B : Drainage connection - stand pipe.
■ When the drain hose is connected to a
sink S trap or waste disposal unit, the hose
must be looped up to the underside of the
bench top and secured.
Drain hose Extension
Extend drain hose as shown below.
CAUTION
Fig. A
When you connect or extend drain
hose, make sure that drain hose is not
kinked.
(Bends should have a 40 mm radius.)
7
I
NSTALLATION INSTRUCTIONS
Step 6 :
Step 8 :
■ Connect the water supply hose to the water tap.
(Fig. A)
After installing the dishwasher, you may
notice a slight sticking of the door to the
dishwasher, when you open or close the door.
If this does happen you need to adjust the level
of the dishwasher.
HOW TO LEVEL THE DISHWASHER
INSTALLATION OF WATER INLET HOSE
■ Some models consist of an inlet valve and hose.
(Fig. B)
After connecting the inlet hose to the tap, turn on
the tap to flush out foreign substances (dirt, sand
or sawdust) in the water lines. Let water drain
into a bucket, and check the water temperature.
Connect the supply hose to the water inlet valve.
Case 1. In case the door is slanted to the right
Fig. C
Fig. A
• If the door slants to the right, see fig. C and
follow these instructions:
1) Unscrew(counter-clockwise) the left leg of
the back side and correct the level.
2) Check the opening of door and repeat if
necessary until the door opens and closes
properly.
• When the product is correctly leveled, there
should be no slant , stickiness or friction sound.
Fig. B
• This dishwasher may be fed with either hot or
cold water. If the water can not be maintained
below 65ºC, the dishwasher must be
connected to cold water.
• When connecting, you may use sealant tape or
sealing compound to avoid water leaks.
• Make sure that the line is not kinked or
sharply bent.
• It is recommended that the new inlet hose be
used and not the existing or old hose.
Water tap
Case 2. In case the door is slanted to the left
Step 7 :
FINAL CHECK AND ASSEMBLING
1 S
ecurely hand tighten supply hose to the
water supply.
Plug the power supply cord into an earthed
electrical point and switch on.
Fig. D
• If the door slants to the left, see fig. D and
follow these instructions:
1) Check the opening of door if there still
remains sticky or friction sound.
2) Check the opening of door and repeat if
necessary until the door opens and closes
properly.
• When the product is correctly leveled, there
should be no slant, stickiness or friction sound.
2 A
fter installing and prior to using the
dishwasher with crockery, we recommend
that you use the dishwasher on ‘Quick’
mode to rinse through. At this stage it is
useful to ensure that there are no operating
problems or water leaks.
When the dishwasher is used for the first
time, there may be a loud noise, if this
happens, turn off the power and restart the
dishwasher.
8
P
ARTS NAME
11. Upper Rack
12. Cutlery Basket
13. Detergent And Rinse Aid Dispenser
14. Vapor Vent Cover
15. Upper Spray Arm
16. Lower Spray Arm
17. Filter ASM
18. Lower Rack
19. Salt Container Cap
20. Cutlery Rack
21. Steam Nozzle
1. Control Panel
2. Door Handle
3. Front Cover
4. Lower Cover
5. Display Window
6. Power Button
7. Drain Hose
8. Inlet Hose
9. Power Cord
10. Adjustable Leg
Funnel
Noise Strip
※ The appearance and specifications may vary without notice.
9
F
UNCTION OF CONTROL BUTTON
MODEL : D1455W(L,M,T,B,C,D,A)F(B,U)
MODEL : D1454W(L,M,T,B,C,D,A)F(B,U)
10
SMART DIAGNOSIS™ function is
available only for the products with
a SMART DIAGNOSIS™ mark.
(Refer to Page 32.)
11
F
UNCTION OF CONTROL BUTTON
MODEL : D1465W(L,M,T,B,C,D,A,)F(B,U)
DW-TS610S / DW-TS610T / DW-TS610W
MODEL : D1464W(L,M,T,B,C,D,A,)F(B,U)
DW-TS605T / DW-TS605W
12
SMART DIAGNOSIS™ function is
available only for the products with
a SMART DIAGNOSIS™ mark.
(Refer to Page 32.)
13
F
UNCTION OF CONTROL BUTTON
① Programme
•P
ress the cycle that corresponds to your desired wash cycle.
② Rinse
•Repeated pressing of the Rinse button will select Extra Hot, Rinse+, Extra Hot & Rinse+.
•If you select the Extra Hot(
) function, the operating temperature will be up to 80℃.
(Eco, Auto, Steam Care, Steam Dual Spray, Steam Power)
•When you select Rinse+( ) an additional rinse cycle is added.
③ Child Lock ( )
•Used to lock or unlock the control buttons to prevent all the settings from being changed by a child.
•To activate or release the Child Lock function, press the Child Lock button for 3 seconds while the dishwasher is
in operation.
•All controls will be disabled except the Child Lock and Power buttons.
•Turning off the dishwasher will not reset the Child Lock function. You must release the Child Lock before you can
operate the dishwasher.
④ Spray
•With each press, the level of water jet is changed to Soft (
(Only Steam Care and Steam Dual Spray)
), Medium(
) and Strong(
) in a sequence.
⑤ Half load
•In case of small load, use upper or lower rack only to save energy.
) or Lower(
) rack only. (Except Quick & Dry, Steam Power)
•W
ith each press, select Upper(
•In case you don’t select this button, the machine always works vario washing, which operates upper and lower spray
arm alternately.
⑥ Delay Start
•If you want to delay the start of selected programme, press this button.
•Pressing this button will increase time by 1 hour.
•The delay start time can be adjusted from 1 hour to 19 hours.
⑦ Power
•For operating, press this button first for power on.
•A
fter operating, this button automatically switches off for safety and energy saving.
•In case of irregular surge disturbance to the machine, the power may be automatically turned off for safety.
⑧ Beep On/Off
•The dishwasher must be switched on.
• The beep on/off function can be set by pressing the Spray and Delay Start button simultaneously for a few seconds.
)
⑨ Steam(
•T
he Steam symbol light will stay on when the Steam course has been selected.
⑩ Indicator
•Child Lock.
•Refill with rinse aid.
•Refill with special salt.
• UV
⑪ Time Left
•B
efore starting, the display window shows the running time of the selected programme.
•After starting, the display window shows the remaining time.
•If the dishwasher has a trouble, the trouble type is displayed. (OE, FE, IE, EI, HE, CE, LE, tE)
•If these error letters are displayed, please refer to the trouble shooting guide page 30 and follow the guide.
⑫ UV
•If you want to sterilise the dishes, press Half Load and Delay Start button.
•After drying cycle, steriliser will be performed by UV lamp.
•At this time, St code is displayed in display window.
•When you open the door of dishwasher, UV lamp is turned off.
※ Don’t look at the lamp directly with the naked eye.
14
B
EFORE USING FOR THE FIRST TIME
Hardness setting
※ You have to check your water hardness and set the softening system level before
operating your dishwasher.
< Water hardness level >
Step 1. Check and find water hardness level
■ Method 1
1) Check the water hardness in your area.
(Your water utility company can help you with this.)
2) Set the softening system level of your dishwasher
according to the water hardness level.
Refer to Step 2.
( L : Softening system level)
*
■ Method 2
)
1) Check your water hardness by using test strip. (
2) Test Procedure
① Immerse all reaction zones of the test strip for approx.1sec (not in running water!).
②S
hake off excess liquid from the strip and wait for 1min.
Then, the green colour of the reaction zone will change to the red-violet.
③ Count the number of red-violet from the strip.
< Water hardness level >
Number of
the areas
(red-violet)
1
2
3
4
Hardness range
°d
°e
°f
mmol/l mg/l
(Ca+Mg) Ca
Water
quality
<7
<9
<12,5
<1,3
<50
soft
7 - 14 9 - 17,5 12,5 - 25 1,3 - 2,5 50 - 100 moderately hard
14 - 21 17,5 - 26 25 - 37 2,5 - 3,8 100 - 150
hard
>21
>26
>37
>3,8
>150
very hard
Softening
system
level
H0, H1
H2, H3
H4, H5
H6, H7
1 °e = 14.25 mg/l CaCO
1 °f = 10 mg/l CaCO
1 °d = 10 mg/l CaO (=1,78 °f) (=1,25 °e)
3) S
et the softening system level of your dishwasher according to the water hardness level.
Refer to Step 2.
Step 2. Setting up the softening system level of your dishwasher
Adjust the water softener to the setting corresponding to the water hardness level in your area.
The water softener has 8 adjustment levels.
The dishwasher is programmed at the factory for a water hardness level of .
This can be checked and altered by using the buttons on the control panel.
1. First, ensure the dishwasher is switched off.
2. Press Half Load and Power button simultaneously and keep them pressed.
3. To change the setting:
Simply press the Half Load button, then the figure will change one by one.
and
.
The display will change between
4. O
nce the hardness setting is correctly adjusted, press the Delay Start button.
The hardness setting is then saved.
15
B
EFORE USING FOR THE FIRST TIME
Step 3. Salt Filling
This model has a water softener to soften hard water.
Please read these notes carefully for correct operation.
In order to provide satisfactory rinsing results, the dishwasher requires soft water, i.e., containing
little or no lime, otherwise water stains will be left behind on the dishes and interior containers.
If the tap water exceeds a certain level of hardness, it must be softened, I.e.,decalcified.
This is achieved by adding a special salt to the water softener inside the dishwasher.
The required amount of salt is set up according to how hard your tap water is.
■F
illing with Salt
Fill the regenerating salt container before starting the washing programme.
Once you have filled with salt you must run the Quick course immediately to remove salt and salt
water around the tub in order to prevent corrosion.
• Remove lower rack and unscrew the cap of salt container.
• Before using your dishwasher for the first time, it is necessary
to Pour 1.5kg of salt and 1 litre of water in to the container.
Otherwise salt refill lamp always turn on during operation.
Use a funnel for ease and clean filling, ensuring that coarse salt
or regenerating salt intended for dishwashers is used.
• After filling, wipe off any spilled salt to seal the cap properly.
• Screw the cap tightly to prevent any suds from penetrating into
the container.
Step 4. Adding Rinse Aid
■F
or filling
To fill the Rinse Aid chamber, push the rinse aid button. Fill the container to the maximum level
with a good quality Rinse Aid, then close the cap.
The Rinse Aid is automatically dispensed during the final rinse cycle.
The dosage is factory set to suit most installations. If, after washing, you notice cloudy spots,
streaks or water marks on your glassware, it may be necessary to increase the setting. To do this,
remove the cap and rotate the indicator arrow to a higher setting then replace the cap . If the glass
is smeared or foam is present on the bottom of the glass or the bottom of the machine, select a
lower setting.
16
I
NFORMATION FOR ENERGY TEST (EN50242)
3. Upper Rack
■Appliance loaded in accordance with
standard specifications.
• Capacity : 14 place settings
• Comparability course : Eco
• Rinse Aid setting : 4
• Reference cleaner : 35g of detergent onto
the inside surface of the door.
• Height-adjustable Rack-U must be inserted
into the uppermost position.
b
f
a
b
1. Cutlery Basket
b
a
d
g
1 2 3 4 5 6 7 8
c
Milk
Oat
Margarine
b
c
f
Tea
b
e
Egg
f
Meat
Spinach
4. Lower Rack
④
e
d
g
2. Cutlery Rack
⑦
d
d
c
④
d
① ①
② ②
⑤
⑤
① ①
④
1234567
f
d
④
f
Milk
Egg
Margarine
17
d e
Tea
Oat
e
Meat
Spinach
H
OW TO USE AND OPERATE
Daily use load
1. Cutlery Basket
3. Upper Rack
2. Cutlery Rack
4. Lower Rack
CAUTION
Do not use the pot and pan with plastic handle.
Poor washing for smudges of waterproof lipstick on the glass.
18
H
OW TO USE AND OPERATE
1. Cutlery Rack
For better washing performance, always load
the dishwasher according to the instructions.
The cutlery rack is suitable for flatware and
most cooking or serving utensils.
■ Before loading items into the dishwasher.
•C
lean off large particles of food, in
particular insoluble items such as bones,
pips etc.
• I tems with burnt on food should be soaked
prior to loading in the dishwasher.
■W
hile you load items into the dishwasher.
•L
oad all items with the opening down.
(Make sure that water does not collect in a
deep base.)
•D
eep based items should be placed at an
angle to help water run off and dry
properly.
•M
ake sure that all items do not touch each
other.
Knife, fork and spoon handles should be
positioned between the tines.
WARNING
■T
ake care not to obstruct the rotation of
spray arms.
Be careful when loading and unloading
sharp-edged items. Load sharp knives
with the blade down in order to reduce
the risk of injury.
■P
lastic items do not dry as well as steel or
porcelain items.
Non Dishwasher Safe Items
■H
eight Adjustable tray
Each side tray can be adjusted independently to
a high or low position to accommodate
different sizes of utensils or cutlery.
he combination of high water temperatures
T
and dishwasher detergent may damage
particular items, therefore we do not
recommend using the dishwasher to wash the
following:
Lift it up
Copper or anodised aluminium
Hand painted silver or gold leaf crockery
Wood or bone handled utensils
Iron or non rust proof utensils
Plastic items which are not dishwasher safe
Expensive one such as silvers and dishes
with golden rings
Fragile item such as crystal glasses
Rotate it front to back
High position
20mm
19
Low position
H
OW TO USE AND OPERATE
Max. 18cm
■R
emovable Cutlery Rack
The entire cutlery rack can be removed if more
space is needed on the upper rack for larger
items.
The cutlery shouldn’t
be longer than 18cm.
(In this case, use
cutlery rack.)
The basket can be split along its length,
increasing the lower rack’s loading versatility.
NOTE
Always remove cutlery from the rack
before removing the rack.
①
②
②
①
Pull the rack out to the end of the rails, then lift
the front of the rack so the rollers clear the stop
on the end of the rail. The rack can now be
slid forward and removed from the rails.
Slide two baskets in opposite directions, then
pull them apart.
WARNING
To prevent injuries, place knives and
other utensils with sharp points on the
cutlery rack.
If you want to load them in the cutlery
basket, place them with the pointed
edges facing downwards.
2. Cutlery Basket
Place forks and spoons in the cutlery basket
with their handles downwards.
3. Lower Rack
The lower rack is suitable for dinner plates,
soup bowls, dishes, pots, pans, lids and even
the grill tray.
For Large utensils, such as whisks, the cover
can be opened by being unhinged.
Take care not to obstruct the rotation of the
spray arm.
Plates should be positioned upright and facing
the centre of the rack and pots, pans and large
dishes must be turned upside down.
20
H
OW TO USE AND OPERATE
• E.g.) Loading dishes
Take care not to obstruct the rotation of the
spray arms.
Fold up whole tines.
• E.g.) Loading bowls
To make it easier to load larger dishes, the front
row of tines can be folded down.
■H
ow to fold down
Fold down the rear row of each pair of tines.
• E.g.) Loading pots
Fold down whole tines.
4. Upper Rack
Rear
The upper rack is suitable for delicate items
such as, small plates, long cutlery, cups,
glasses and dishwasher safe plastic items.
Front
The front side rows are composed with a pair
of rows of tines.
Each pair can be folded separately to load large
dishes, especially bowls.
To make the space between two tines wider,
fold down the rear row of each pair.
Fold down the back side rows of tines to load
pots.
Plates should be positioned upwards with the
plate bottom facing the front of the rack.
Cups, glasses and bowls must be positioned
upside down.
21
H
OW TO USE AND OPERATE
Take care not to obstruct the rotation of the
spray arm under the upper rack.
djusting the height of the upper
A
rack
The height of the upper rack can be adjusted
when you load glasses with long stems or tall
crockery items.
• M
ove the upper rack to the lower
position
To make it easier to load larger cups or glasses,
the left side row of tines can be folded down.
For the upper rack’s position, dishes shouldn’t
be larger than 25cm with the upper position,
nor 20cm with the lower position.
Pull up the levers
on either side of
the rack.
• Move to upper position
How to fold down
• Pull up the tine
• Rotate the tine
Lift the rack upward.
There is a 45mm gain in height when the upper
rack is moved to the lower position.
Long stem glassware can be
placed without interference
from the lowered tines.
45mm
After adjusting the rack levels, check that the
spray arms are free to rotate.
The cup racks can be folded up out of the way
for tall crockery items.
WARNING
Before adjusting, ensure the rack is
empty of all crockery.
Otherwise crockery may get damaged or
you may get injured.
With the lower position of the upper rack,
check if the bottom part of upper rack
including spray arm is not disturbing
items on the lower rack.
When the upper rack is in the lower
position, push in the upper rack first, and
the lower rack later.
(Pull out the lower rack first, and the
upper rack later.)
22
H
OW TO USE AND OPERATE
5. A
dding Detergent
• Detergent must be put into the detergent
chamber before starting every programme.
• Please follow the manufacturer’s instructions
within the manual, when determining the
correct amount of detergent to use.
• If your dishes are moderately dirty, you may
use slightly less detergent than recommended.
• Chambers hold up to 50g including pre-wash
chamber.
• The amount of detergent required depends on
the programme. Please refer to the guide table.
PROGRAMME
Quick & Dry
Quick
Eco
Auto
Steam Care
Steam Dual Spray
Steam Power
Push button to open
AMOUNT OF DETERGENT
Pre-wash
(Onto the door)
5g
5g
5g
-
Main-wash
(Dispenser)
20g
10g
35g
30g
20g
30g
35g
Place proper detergent into this compartment
• The detergent is dispensed automatically
during the operation.
• The chamber lid remains open after
operation.
Detergent Information
When using tablets, place them onto the
inside surface of the door. The use of
some combined detergent/rinse aid
tablets can cause the dispenser to
remain shut during the wash.
Use only the detergent intended for household
dishwashers. (Ordinary hand-washing detergent
should not be used, because the foam will
interfere with proper operation.)
When using some dishwasher tablets, the
dispenser may not open due to their excessive
size.
If this happens, place the tablet onto the floor of
the tub.
23
H
OW TO USE AND OPERATE
6. R
efilling
■ For refilling Rinse Aid
WARNING
The detergent used is a special
Dishwasher detergent and like all
household chemicals it should be
treated as harmful and kept out of reach
of children. After completion of the wash
programme, the detergent compartment
should be checked and any remaining
detergent removed.
Depending on the dosage setting and the
number of washes, the chamber may need to be
topped up, approximately once a month. The
rinse aid level can be checked by two methods.
• By the indicator window on the dispenser
when the dishwasher door is fully open.
● Black indicates sufficient Rinse Aid
○ Clear indicates Rinse Aid required
ATTENTION
Rinse-Aid Indicator
Using combined detergent products
(ex.3 in 1)
Some products integrated with rinse aid
work best with specific programmes
only.
You will obtain optimum rinsing and
drying results by using conventional
rinse aids.
The use of Dishwasher Tablet products
may also cause the soap dispenser to
remain shut, therefore failing to
dispense the soap tablet.
These combined detergent products
can alternatively be placed in the filter
prior to starting the wash cycle.
Please contact the detergent
manufacturer if the drying performance
is very poor or you find white foam,
when you use the combined detergent
products.
The rinse aid dial should be set to
minimum when using wash tablets with
built in rinse aid.
Excessive rinse aid can cause foaming
at the end of the wash.
We do not warrant the complaints that
are directly related to the use of these
products. Do not use liquid rinse aid if
using tablets containing a rinse aid
agent.
Adjust Lever (Rinse)
• By the light on the control panel, being lit,
when the dishwasher is working on.
■ D1455**
■D
1465**
DW-TS610*
When the lamp is lit, it means the rinse aid
is almost empty. Refill the Rinse Aid
chamber as soon as possible.
■ D1454**
■ D1464**
DW-TS605*
Rinse Aid Information
inse Aid is necessary to remove spots and
R
streaks of the water from dishes as well as
improved drying. Using the correct amount
will improve wash performance. However,
using too much can produce excess foam
leading to possible water leaks.
24
H
OW TO USE AND OPERATE
7. Drying
■ To assist drying, we recommend that the
door be partially opened after the cycle.
The display will indicate Cd(cool dry) for a
further 60 minutes after the end of the cycle
time. It can be interrupted or terminated by
simply opening the door.
■ The use of rinse aid is recommended for
optimum drying results.
■ Select the Extra Hot option to get better
drying results.
■ For refilling Salt
When the salt container is empty, the salt refill
lamp will automatically turn on during
operation. The salt should be refilled after the
cycle has finished. We recommend the salt refill
should always be carried out, as mentioned on
previous page, prior to starting the next
operation. This will immediately thin and drain
away any excess salt solution.
■ D1455**
■D
1465**
DW-TS610*
When the lamp is lit, this means that the
salt aid is almost empty. Refill the Salt Aid
chamber as soon as possible.
■ D1454**
■D
1464**
DW-TS605*
NOTE
• After filling with salt, it may take a little
while before the indicator light turns
off.
• When the control is set to , it is not
necessary to fill up with salt as no salt
is consumed while the dishwasher is
operating. If the control is set between
and , then salt must be added to
the salt container.
WARNING
Do not pour detergent into the salt
container. This will destroy the water
softener.
25
O PERATING SEQUENCE
Open the door and check
the filters
Before starting, the display window shows
the running time of the selected
programme.
After starting, the display window shows
the remaining time.
The time in the display window will start
to decrease minute by minute.
If the door is opened during the
programme a safety device ensures that the
machine stops.
Once the door is re-closed the programme
will start from where it was interrupted.
Ensure they are clean and properly
positioned. (See User Maintenance
Instructions)
At the end of the washing
programme
Press the Power button
C
heck there is rinse aid
and salt
The corresponding indicator lights will
illuminate if refilling is required.
Load the dishes
End is displayed on the digital display and
a buzzer sounds.
And the dishwasher automatically switches
off for safety and energy saving later.
Remove any excess food.
Pull the lower rack out and arrange the
dishes and cutlery.
Pull the upper rack out and arrange the
cups, glasses, etc.
If you select UV function, the dishwasher
automatically switches off after sterilising
action.
CAUTION
Do not load the items in upper rack
when the lower rack is pulled out and
loaded.
CAUTION
Empty the lower rack first and then the
upper one; this will avoid water dripping
from the upper rack onto the dishes
below.
Ensure the spray arms can
freely rotate
WARNING
In general it is not advisable to open
the door while the machine is working.
If the door is opened, a safety device
ensures that the machine stops.
Care must be taken if the door is
opened during the hot phase or
immediately after a programme has
finished, as steam may escape.
Measure out detergent
Add the required amount of detergent into
the dispenser and close the lid.
Setting and starting the
programme
Press the programme button to select the
desired programme.
After 10 seconds, the machine will start.
If necessary, select the option function
corresponding to the desired programme.
The indicator lights of the programme and
all the phases of the programme will come
on.
CAUTION
The door should not be left in the open
position since this could present a
tripping hazard.
26
P
ROGRAMME
▶Running time may vary according to the water temperature, water pressure and voltage.
▶Running time doesn’t include Cool Dry - 60min.
Programme
WASH
Pre Wash
RINSE
Main Wash
Rinse 1
Rinse 2
Heating
Rinse
Quick & Dry
65℃
Quick
60℃
65℃
Eco
43℃
59℃
Auto
Steam Power
COOL
DRY
70℃
The programme sequence is optimised and adapted in accordance with how dirty the dishes are.
50℃
70℃
45℃
60℃
70℃
45℃
73℃
70℃
Steam Care
Steam Dual
Spray
DRY
Quick & Dry
As a result, the energy and water consumption is
kept as low as possible. The F ON display
means that the sensor is sensing the status of the
dishwasher.
This programme offers good washing
performance within 60 minutes.
To assist drying, we recommend to open the
door partially when you see the small amount of
wet streaks or drops after the cycle.
Opening the door right after the cycle may set
the High temperature alarm off.
Steam Care
This cycle adds the gentle power of steam to
boost the cleaning power of the delicate cycle.
The cycle is adequate for effectively cleaning
delicate items like fine china or stemware.
Quick
Can use for lightly soiled recently used dishes
and cutlery.
Steam Dual Spray
This cycle washes the upper and lower racks at
different spray intensities. The lower rack is
washed with a strong spray for hard to clean
items, while the upper rack is washed with a
medium spray for more delicate items. This
provides optimum cleaning performance for
mixed loads, including fine china and stemware.
Eco
This programme offers efficient energy and
water consumption for a good washing
performance on a moderately soiled load.
Auto
During the Auto programme, the degree of
soiling in the dishes is determined by the amount
of clouding to the water.
According to the degree of soiling, the
programme automatically adjusts the washing
time and temperature.
Steam Power
This cycle adds the strong power of steam to
boost the cleaning power of the intensive cycle.
The cycle is adequate for effectively cleaning
strongly polluted items like pots and pans.
■A
uto Restart
I f the dishwasher is turned off by a power failure, it will restart from the position it stopped at adjusting
accordingly when you press the Power button again.
27
27
U
ser maintenance instructions
To prevent trouble and poor operating, it is important to check filters and spray arms
at regular intervals.
Keeping the dishwasher
Upper Spray Arm
• Pull the upper rack forwards.
• Check that the water jet holes are not blocked.
• If cleaning is required, remove the arm by
unscrewing the nut.
• Clean the spray arm and replace it in the
reverse order.
• If you are not using the dishwasher for a long
time, run a Quick & Dry cycle without detergent.
When the cycle is finished, clean the dishwasher
according to the USER MAINTENANCE
INSTRUCTIONS to remove the food debris at
the bottom of the dishwasher and close the door.
Filters
• Remove the lower rack first.
• Turn the mesh filter counterclockwise.
• Take out the mesh filter, upper STS filter and
outer filter.
• We recommend to clean them and run the Quick &
Dry cycle without detergent at least once a week.
• Replace them in the reverse order.
Water Inlet
Mesh filter
• A filter is incorporated in the connection of
the valve on the water inlet hose.
If insufficient water flows into the dishwasher,
check that the filter is not blocked.
• Cleaning the filter
- Disconnect the dishwasher
from the mains supply.
Switch off at the mains
socket and remove the plug.
- Turn off the tap.
- Unscrew the inlet hose.
- Remove the filter from
connection.
- Clean the filter in the supply
hose under running water.
- Refit the filter, making sure
it is sitting correctly.
- Reconnect the inlet hose to the tap.
- Turn on the tap.
• If there is a leak, the inlet hose might not be
on securely, or it may have been screwed on
at an angle. Unscrew and reconnect the water
inlet valve correctly.
• Reconnect power supply.
Outer filter
Upper STS
filter
■A
fter each cycle, clean the filter for a
better washing result.
■ Before starting, check that the filter is
assembled well. If the filter is not
assembled correctly, you might have a
poor cleaning result.
Lower Spray Arm
• Check that the water jet holes are not blocked.
• If cleaning is required, remove the arm by
pulling up.
• Clean the spray arm and replace it pulling down.
28
ROUBLE SHOOTING GUIDE
■ If a problem occurs check below to see whether this can be solved.
■ In the unlikely event that the problem cannot be rectified, please contact a
service engineer.
Problem
Possible Causes
• Check the plug.
No lights come on when
the power is turned on.
• Plug is not properly inserted into
the socket.
• Fuses blown or circuit breaker
tripped.
• The electricity from the house was
cut off.
The machine does not
start.
•D
oor is not fully closed.
• The start button is not pressed.
• Close the door.
• Press the start button.
The spray arms do not
rotate smoothly.
• The mounting of the spray arms is
blocked by food particles.
• Clean the holes of the
spray arm.
White deposits are left
on the dishwasher after
washing.
• The amount of detergent or rinseaid set incorrectly.
• The salt container is empty.
• The salt container cap is not
securely screwed on.
• Check the detergent
or rinse-aid.
• Check the salt
container or cap.
Streaks are left on
glassware.
• Too little Rinse-Aid dispensed.
Dry results are not
satisfactory.
• Too little Rinse-Aid dispensed.
Washing results are not
satisfactory.
• Incorrect amount of detergent.
•U
tensils incorrectly arranged or
overloaded.
•F
ilters are clogged.
•W
ater jet holes of spray arms
blocked.
•S
pray arm's rotation obstructed by
utensils.
•U
nsuitable programme selected.
29
Solution
• Check the electricity.
• Call for service.
• Fill the rinse-aid.
• Adjust the level of
rinse-aid container.
T
ROUBLE SHOOTING GUIDE
Problem
Possible Causes
Solution
• The drain hose is kinked.
• The filter is clogged.
•M
otor trouble.
(Washing motor or Drain motor)
• Straighten hose(s).
• Clean the filter.
• If you can not solve the
problem, call for
service.
The display shows IE
code.
• Water is not supplied.
• Water tap is not opened.
• Water sensor has trouble.
• Check the water tap.
• If you can not solve the
problem, call for
service.
The display shows EI
code.
(Automatically Drain
pump operated.)
•W
ater is leaking from the hose
connections.
•D
amage to the unit has been
caused by a water leak.
The display shows FE
code. (Automatically
Drain pump operated.)
• Excessive water is supplied ,which
is more than the normal water level.
• There is a problem with the inlet
valve.
The display shows OE
code. (Water is not
pumped away.)
The display shows HE
code.
• Close the water tap
and unplug the power
plug.
• The water heater circuit is damaged.
• Call for service.
The display shows tE
code.
• Thermistor trouble or very high inlet
water temperature.
The display shows LE
code.
•M
otor trouble.
The display shows CE
code.
• Motor trouble.
30
T
ROUBLE SHOOTING GUIDE
■ These are not error codes indicating a malfunction.
Code
Description
The display shows
PF code
This indicates there was a power failure. This function protects
the dishwasher in the event that the power goes out or the power
to the unit is disrupted. When power is returned, and a button is
pushed, this will display for 10 seconds and then go away.
The display shows
Cd code
Cd means Cool-dry. This is an additional drying cycle to assist
drying performance. This cycle runs for a further 60 minutes after
the course has finished. It can be interrupted at any time by
opening the door.
The display shows
CL code
CL means Child-Lock. This function is used to lock or unlock
the control buttons to prevent all the settings from being changed
by a child. It can only be activated during the wash cycle.
The display shows
F code
When the unit is displaying F, the sensor is measuring the
water clarity. After 5 minutes of sensing (except draining and
filling), the unit's display will then show the processing time.
The display shows
numbers between 1 ~ 19
This is not an error code, but indicates the setting of the delay
start. To cancel the function, turn the power off. To change the
course and option, open the door and select another course and
option. Countdown will then continue after door is closed again.
Buzzing sound.
(High Temperature Alarm)
This is not an error. When you open the door right after heating
wash, rinse or dry, buzzing sound would keep on ringing for
safety if the inside is heated.
Odor
If the dishwasher is not used daily, we recommend to run a
Quick cycle once or twice a day until you have a full load.
In case odor still persists, run a vinegar rinse through a Auto
cycle by putting 2cup(500ml) of white vinegar in an upright
measuring cup in the lower rack, without detergent.
We recommend to maintain according to the USER
MAINTENANCE INSTRUCTIONS.
31
T
ROUBLE SHOOTING GUIDE
NOTE
SMART DIAGNOSIS function is available only for the products with a SMART DIAGNOSIS mark.
In case of a mobile phone with static option, the smart diagnosis function might not operate.
Using SMART DIAGNOSISTM
nly use this feature when instructed to do so by the call centre.
O
The transmission sounds similar to a fax machine, and so has no meaning except to the
call centre.
SMART DIAGNOSIS™ can not be activated if the dishwasher does not power up.
If this happens, then troubleshooting must be done without SMART DIAGNOSIS™.
If you experience problems with your dishwasher, call the Customer information centre.
Follow the call centre agent's instructions, and do the following steps when requested:
1. Press the Power button to turn on the dishwasher.
Do not press any other buttons.
2. W
hen instructed to do so by the call centre, place the
mouthpiece of your phone very close to the Power button.
(Max. 10mm)
3. P
ress and hold the Delay Start button for three seconds, while
holding the phone mouthpiece to the icon or Power button.
4. K
eep the phone in place until the tone transmission has finished.
This takes about 17 seconds, and the display will count down the time.
• For best results, do not move the phone while the tones are being transmitted.
• If the call centre agent is not able to get an accurate recording of the data, you may be
asked to try again.
•P
ressing the Power button during the transmission will shut off the SMART
DIAGNOSIS™.
5. Once the countdown is over and the tones have stopped, the machine will display ‘END’
and turn off automatically after a few seconds.
Resume your conversation with the call centre agent, who will then be able to assist you
using the information transmitted for analysis at the call to Customer information centre.
32
S
PECIFICATION
DW-TS610S / DW-TS610T / DW-TS610W
DW-TS605T / DW-TS605W
D1455W(L,M,T,B,C,D,A)F
D1454W(L,M,T,B,C,D,A)F
D1465W(L,M,T,B,C,D,A)F
D1464W(L,M,T,B,C,D,A)F
D1455W(L,M,T,B,C,D,A)B
D1454W(L,M,T,B,C,D,A)B
D1465W(L,M,T,B,C,D,A)B
D1464W(L,M,T,B,C,D,A)B
D1455W(L,M,T,B,C,D,A)U
D1454W(L,M,T,B,C,D,A)U
D1465W(L,M,T,B,C,D,A)U
D1464W(L,M,T,B,C,D,A)U
Capacity
14 Place settings
Weight
See rating label
Power Supply
See rating label
Power Consumption
See rating label
Water Feed Pressure
50 ~ 800 kPa
33
M EMO
34
M EMO
35
CUSTOMER SERVICES Tel. : +44-(0) 844 847 LGLG(5454)
Fax. : +44-(0) 844 847 1413
LGEUK SERVICE WEB-SITE : http://www.lge.co.uk
For U.K. Customer
You may also find owner's manual in video version at following link
www.lg.com/steamdishwasher