EN
User manual
Fridge-Freezer
ZBB27650SA
Contents
Safety instructions _ _ _ _ _ _ _ _ _ _ _ _ _ _
Control panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
First use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Daily use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Helpful hints and tips _ _ _ _ _ _ _ _ _ _ _ _ _
2
4
7
7
8
Care and cleaning _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 9
What to do if… _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 10
Technical data _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 12
Installation _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 12
Environmental concerns _ _ _ _ _ _ _ _ _ _ _ 16
Subject to change without notice.
Safety instructions
In the interest of your safety and to ensure the
correct use, before installing and first using the
appliance, read this user manual carefully, including its hints and warnings. To avoid unnecessary mistakes and accidents, it is important to
ensure that all people using the appliance are
thoroughly familiar with its operation and safety
features. Save these instructions and make sure
that they remain with the appliance if it is moved
or sold, so that everyone using it through its life
will be properly informed on appliance use and
safety.
For the safety of life and property keep the precautions of these user's instructions as the manufacturer is not responsible for damages caused
by omission.
Children and vulnerable people safety
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have
been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that
they do not play with the appliance.
• Keep all packaging well away from children.
There is risk of suffocation.
• If you are discarding the appliance pull the
plug out of the socket, cut the connection cable (as close to the appliance as you can)
and remove the door to prevent playing children to suffer electric shock or to close themselves into it.
• If this appliance featuring magnetic door
seals is to replace an older appliance having
a spring lock (latch) on the door or lid, be
2
sure to make that spring lock unusable before
you discard the old appliance. This will prevent it from becoming a death trap for a child.
General safety
Warning!
Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.
• The appliance is intended for keeping foodstuff and/or beverages in a normal household
and similar applications such as:
– staff kitchen areas in shops, offices and
other working environments;
– farm houses and by clients in hotels, motels and other residential type environments;
– bed and breakfast type environments;
– catering and similar non-retail applications.
• Do not use a mechanical device or any artificial means to speed up the thawing process.
• Do not use other electrical appliances (such
as ice cream makers) inside of refrigerating
appliances, unless they are approved for this
purpose by the manufacturer.
• Do not damage the refrigerant circuit.
• The refrigerant isobutane (R600a) is contained within the refrigerant circuit of the appliance, a natural gas with a high level of environmental compatibility, which is nevertheless
flammable.
During transportation and installation of the
appliance, be certain that none of the components of the refrigerant circuit become damaged.
www.zanussi.com
If the refrigerant circuit should become damaged:
– avoid open flames and sources of ignition
– thoroughly ventilate the room in which the
appliance is situated
• It is dangerous to alter the specifications or
modify this product in any way. Any damage
to the cord may cause a short-circuit, fire
and/or electric shock.
Warning! Any electrical component (power cord, plug, compressor) must be replaced by a certified service agent or qualified
service personnel to avoid hazard.
1.
2.
•
•
•
•
Power cord must not be lengthened.
Make sure that the power plug is not
squashed or damaged by the back of the
appliance. A squashed or damaged power plug may overheat and cause a fire.
3. Make sure that you can come to the
mains plug of the appliance.
4. Do not pull the mains cable.
5. If the power plug socket is loose, do not
insert the power plug. There is a risk of
electric shock or fire.
6. You must not operate the appliance without the lamp cover (if foreseen) of interior
lighting.
This appliance is heavy. Care should be taken
when moving it.
Do not remove nor touch items from the
freezer compartment if your hands are damp/
wet, as this could cause skin abrasions or
frost/freezer burns.
Avoid prolonged exposure of the appliance to
direct sunlight.
Bulb lamps (if foreseen) used in this appliance are special purpose lamps selected for
household appliances use only. They are not
suitable for household room illumination.
Daily Use
• Do not put hot pot on the plastic parts in the
appliance.
• Do not store flammable gas and liquid in the
appliance, because they may explode.
www.zanussi.com
• Do not place food products directly against
the air outlet on the rear wall. (If the appliance
is Frost Free)
• Frozen food must not be re-frozen once it has
been thawed out.
• Store pre-packed frozen food in accordance
with the frozen food manufacturer's instructions.
• Appliance's manufacturers storage recommendations should be strictly adhered to. Refer to relevant instructions.
• Do not place carbonated or fizzy drinks in the
freezer compartment as it creates pressure
on the container, which may cause it to explode, resulting in damage to the appliance.
• Ice lollies can cause frost burns if consumed
straight from the appliance.
Care and cleaning
• Before maintenance, switch off the appliance
and disconnect the mains plug from the
mains socket.
• Do not clean the appliance with metal objects.
• Do not use sharp objects to remove frost
from the appliance. Use a plastic scraper.
• Regularly examine the drain in the refrigerator
for defrosted water. If necessary, clean the
drain. If the drain is blocked, water will collect
in the bottom of the appliance.
Installation
Important! For electrical connection carefully
follow the instructions given in specific
paragraphs.
• Unpack the appliance and check if there are
damages on it. Do not connect the appliance
if it is damaged. Report possible damages
immediately to the place you bought it. In that
case retain packing.
• It is advisable to wait at least four hours before connecting the appliance to allow the oil
to flow back in the compressor.
• Adequate air circulation should be around the
appliance, lacking this leads to overheating.
To achieve sufficient ventilation follow the instructions relevant to installation.
3
• Wherever possible the back of the product
should be against a wall to avoid touching or
catching warm parts (compressor, condenser) to prevent possible burn.
• The appliance must not be located close to
radiators or cookers.
• Make sure that the mains plug is accessible
after the installation of the appliance.
• Connect to potable water supply only (If a
water connection is foreseen).
Environment Protection
This appliance does not contain gasses
which could damage the ozone layer, in either its refrigerant circuit or insulation materials.
The appliance shall not be discarded together
with the urban refuse and rubbish. The insulation foam contains flammable gases: the appliance shall be disposed according to the applicable regulations to obtain from your local authorities. Avoid damaging the cooling unit, especially at the rear near the heat exchanger. The
materials used on this appliance marked by the
are recyclable.
symbol
Service
• Any electrical work required to do the servicing of the appliance should be carried out by
a qualified electrician or competent person.
• This product must be serviced by an authorized Service Centre, and only genuine spare
parts must be used.
Control panel
1
7
8
6
5
1 Display
2 Freezer Temperature warmer button
4
3
2
7 Fridge Temperature colder button
8 Appliance ON/OFF button
It is possible to change predefined sound of
buttons to a louder one by pressing together
the Mode button and Temperature colder button
for some seconds. Change is reversible.
3 Freezer Temperature colder button
4 OK button
5 Mode button
6 Fridge Temperature warmer button
Display
1
2
3
4
5
6
7
Off
min
10 9
1 Fridge compartment indicator
2 Fridge temperature indicator and timer indicator
4
8
3 Fridge off indicator
4 Intensive Cooling function
5 Holiday function
www.zanussi.com
6 Fast Freeze function
7 Freezer temperature indicator
8 Freezer compartment indicator
9 Alarm indicator
10 Child Lock function
Switching on
To switch on the appliance do these steps:
1. Connect the mains plug to the power socket.
2. Press the appliance ON/OFF button if the
display is off.
3. The alarm buzzer could operate after few
seconds.
To reset the alarm refer to "High temperature alarm".
4. If "dEMo" appears on the display, the appliance is in demonstration mode. Refer to
"WHAT TO DO IF..." paragraph.
5. The temperature indicators show the set
default temperature.
To select a different set temperature refer to
"Temperature regulation".
Switching off
To switch off the appliance do these steps:
1. Press the appliance ON/OFF button for 5
seconds.
2. The display switches off.
3. To disconnect the appliance from the power disconnect the mains plug from the power socket.
Switching off the fridge
To switch off the fridge:
1. Press the Mode button until the corresponding icon appears.
The fridge Off indicator and the fridge compartment indicator flash.
The fridge temperature indicator shows
dashes.
2. Press the OK button to confirm.
3. The fridge Off indicator is shown.
Switching on the fridge
To switch on the fridge:
1. Press the fridge temperature regulator.
www.zanussi.com
Or:
1. Press the Mode button until the corresponding icon appears.
The Fridge Off indicator flashes.
2. Press the OK button to confirm.
3. The fridge Off indicator goes off.
To select a different set temperature refer to
"Temperature regulation".
Temperature regulation
The set temperature of the fridge and of the
freezer may be adjusted by pressing the temperature buttons
Set default temperature:
• + 5°C for the fridge
• -18°C for the freezer
The temperature indicators show the set temperature.
The set temperature will be reached within 24
hours.
Important! After a power failure the set
temperature remains stored.
Child Lock function
To lock the buttons from unintentional operation
select the Child Lock function.
To switch on the function:
1. Press the Mode button until the corresponding icon appears.
2. The Child Lock indicator flashes.
3. Press the OK button to confirm.
The Child Lock indicator is shown.
To switch off the function:
1. Press the Mode button until the Child Lock
indicator flashes.
2. Press the OK button to confirm.
3. The Child Lock indicator goes off.
Intensive Cooling function
If you need to insert a large amount of warm
food, for example after doing the grocery shopping, we suggest activating the Intensive Cooling function to chill the products more rapidly
and to avoid warming the other food which is already in the refrigerator.
To switch on the function:
5
1.
Press the Mode button until the corresponding icon appears.
The Intensive Cooling indicator flashes.
2. Press the OK button to confirm.
The Intensive Cooling indicator is shown.
The Intensive Cooling function shuts off automatically after approximately 6 hours.
To switch off the function before its automatic
end:
1. Press the Mode button until the Intensive
Cooling indicator flashes.
2. Press the OK button to confirm.
3. The Intensive Cooling indicator goes off.
Important! The function switches off by selecting a different fridge set temperature.
Holiday function
This function allows you to keep the refrigerator
closed and empty during a long holiday period
without the formation of a bad smell.
Important! The fridge compartment must be
empty with holiday function on.
To switch on the function:
1. Press the Mode button until the corresponding icon appears.
The Holiday indicator flashes.
The fridge temperature indicator shows the
set temperature.
2. Press the OK button to confirm.
The Holiday indicator is shown.
To switch off the function:
1. Press the Mode button until the Holiday indicator flashes.
2. Press the OK button to confirm.
3. The Holiday indicator goes off.
Important! The function switches off by selecting a different fridge set temperature.
Fast Freeze function
To switch on the function:
1. Press the Mode button until the corresponding icon appears.
6
The Fast Freeze indicator flashes.
Press the OK button to confirm.
The Fast Freeze indicator is shown.
This function stops automatically after 52 hours.
To switch off the function before its automatic
end:
1. Press the Mode button until the Fast Freeze
indicator flashes.
2. Press the OK button to confirm.
3. The Fast Freeze indicator goes off.
2.
Important! The function switches off by selecting a different freezer set temperature.
High temperature alarm
An increase in the temperature in the freezer
compartment (for example due to an earlier
power failure) is indicated by:
• flashing the alarm and freezer temperature indicators
• sounding of buzzer.
To reset the alarm:
1. Press any button.
2. The buzzer switches off.
3. The freezer temperature indicator shows
the highest temperature reached for a few
seconds. Then shows again the set temperature.
4. The alarm indicator continue to flash until
the normal conditions are restored.
When the alarm has returned the alarm indicator
goes off.
Door open alarm
An acoustic alarm will sound if the door is left
open for a few minutes. The door open alarm
conditions are indicated by:
• flashing Alarm indicator
• acoustic buzzer
When normal conditions are restored (door
closed), the alarm will stop.
During the alarm, the buzzer can be switched off
by pressing any button.
www.zanussi.com
First use
Cleaning the interior
Before using the appliance for the first time,
wash the interior and all internal accessories
with lukewarm water and some neutral soap so
as to remove the typical smell of a brand-new
product, then dry thoroughly.
Important! Do not use detergents or abrasive
powders, as these will damage the finish.
Daily use
Freezing fresh food
The freezer compartment is suitable for freezing
fresh food and storing frozen and deep-frozen
food for a long time.
To freeze fresh food activate the Fast Freeze
function at least 24 hours before placing the
food to be frozen in the freezer compartment.
Place the fresh food to be frozen in the third
compartment.
The maximum amount of food that can be frozen
in 24 hours is specified on the rating plate, a
label located on the inside of the appliance.
The freezing process lasts 24 hours: during this
period do not add other food to be frozen.
the power has been off for longer that the value
shown in the technical characteristics chart
under "rising time", the defrosted food must be
consumed quickly or cooked immediately and
then re-frozen (after cooling).
Storage of frozen food
When first starting-up or after a period out of
use, before putting the products in the compartment let the appliance run at least 24 hours on
the Fast Freezing setting.
If large quantities of food are to be stored, remove all drawers and baskets from appliance
and place food on cooling shelves to obtain the
best performance.
Ice-cube production
This appliance is equipped with one or more
trays for the production of ice-cubes. Fill these
trays with water, then put them in the freezer
compartment.
Warning! Make sure that foods do not
exceed the load limit stated on the side of
Thawing
Deep-frozen or frozen food, prior to being used,
can be thawed in the refrigerator compartment
or at room temperature, depending on the time
available for this operation.
Small pieces may even be cooked still frozen,
directly from the freezer: in this case, cooking
will take longer.
Important! Do not use metallic instruments to
remove the trays from the freezer.
Cold accumulators
The freezer contains at least one cold accumulator which increases storage time in the event
of a power cut or breakdown.
the upper section (where applicable)
Important! In the event of accidental
defrosting, for example due to a power failure, if
www.zanussi.com
7
Movable shelves
The walls of the refrigerator are equipped with a
series of supports so that the shelves can be
positioned as desired.
Positioning the door shelves
To permit storage of
food packages of various sizes, the door
shelves can be
placed at different
heights.
1
2
3
Gradually pull the
shelf in the direction
of the arrows until it
comes free, then reposition as required.
Helpful hints and tips
Hints for energy saving
• Do not open the door frequently or leave it
open longer than absolutely necessary.
• If the ambient temperature is high and the
Temperature Regulator is set to low temperature and the appliance is fully loaded, the
compressor may run continuously, causing
frost or ice on the evaporator. If this happens,
set the Temperature Regulator toward warmer settings to allow automatic defrosting and
so a saving in electricity consumption.
Hints for fresh food refrigeration
To obtain the best performance:
• do not store warm food or evaporating liquids
in the refrigerator
• do cover or wrap the food, particularly if it has
a strong flavour
8
• position food so that air can circulate freely
around it
Hints for refrigeration
Useful hints:
Meat (all types) : wrap in polythene bags and
place on the glass shelf above the vegetable
drawer.
For safety, store in this way only one or two
days at the most.
Cooked foods, cold dishes, etc..: these should
be covered and may be placed on any shelf.
Fruit and vegetables: these should be thoroughly cleaned and placed in the special drawer(s)
provided.
Butter and cheese: these should be placed in
special airtight containers or wrapped in aluminium foil or polythene bags to exclude as much
air as possible.
www.zanussi.com
Milk bottles: these should have a cap and
should be stored in the bottle rack on the door.
Bananas, potatoes, onions and garlic, if not
packed, must not be kept in the refrigerator.
Hints for freezing
To help you make the most of the freezing process, here are some important hints:
• the maximum quantity of food which can be
frozen in 24 hrs. is shown on the rating plate;
• the freezing process takes 24 hours. No further food to be frozen should be added during this period;
• only freeze top quality, fresh and thoroughly
cleaned, foodstuffs;
• prepare food in small portions to enable it to
be rapidly and completely frozen and to make
it possible subsequently to thaw only the
quantity required;
• wrap up the food in aluminium foil or polythene and make sure that the packages are
airtight;
• do not allow fresh, unfrozen food to touch
food which is already frozen, thus avoiding a
rise in temperature of the latter;
• lean foods store better and longer than fatty
ones; salt reduces the storage life of food;
• water ices, if consumed immediately after removal from the freezer compartment, can
possibly cause the skin to be freeze burnt;
• it is advisable to show the freezing in date on
each individual pack to enable you to keep
tab of the storage time.
Hints for storage of frozen food
To obtain the best performance from this appliance, you should:
• make sure that the commercially frozen foodstuffs were adequately stored by the retailer;
• be sure that frozen foodstuffs are transferred
from the foodstore to the freezer in the shortest possible time;
• not open the door frequently or leave it open
longer than absolutely necessary;
• once defrosted, food deteriorates rapidly and
cannot be refrozen;
• do not exceed the storage period indicated
by the food manufacturer.
Care and cleaning
Caution! Unplug the appliance before
carrying out any maintenance operation.
This appliance contains hydrocarbons in its
cooling unit; maintenance and recharging
must therefore only be carried out by authorized
technicians.
Periodic cleaning
The equipment has to be cleaned regularly:
• clean the inside and accessories with lukewarm water and some neutral soap.
• regularly check the door seals and wipe clean
to ensure they are clean and free from debris.
• rinse and dry thoroughly.
Important! Do not pull, move or damage any
pipes and/or cables inside the cabinet.
Never use detergents, abrasive powders, highly
perfumed cleaning products or wax polishes to
www.zanussi.com
clean the interior as this will damage the surface
and leave a strong odour.
Clean the condenser (black grill) and the compressor at the back of the appliance with a
brush. This operation will improve the performance of the appliance and save electricity consumption.
Important! Take care of not to damage the
cooling system.
Many proprietary kitchen surface cleaners contain chemicals that can attack/damage the plastics used in this appliance. For this reason it is
recommended that the outer casing of this appliance is only cleaned with warm water with a
little washing-up liquid added.
After cleaning, reconnect the equipment to the
mains supply.
9
Defrosting the refrigerator
Frost is automatically eliminated from the evaporator of the refrigerator compartment every
time the motor compressor stops, during normal
use. The defrost water drains out through a
drain hole into a special container at the back of
the appliance, over the motor compressor,
where it evaporates.
It is important to periodically clean the defrost
water drain hole in the middle of the refrigerator
compartment channel to prevent the water
overflowing and dripping onto the food inside.
Defrosting of the freezer
The freezer compartment of this model, on the
other hand, is a "no frost" type. This means that
there is no buildup of frost when it is in operation, neither on the internal walls nor on the
foods.
The absence of frost is due to the continuous
circulation of cold air inside the compartment,
driven by an automatically controlled fan.
Periods of non-operation
When the appliance is not in use for long periods, take the following precautions:
• disconnect the appliance from electricity supply
• remove all food
• defrost (if foreseen) and clean the appliance
and all accessories
• leave the door/doors ajar to prevent unpleasant smells.
If the cabinet will be kept on, ask somebody to
check it once in a while to prevent the food inside from spoiling in case of a power failure.
What to do if…
During operation of the appliance some smaller
but annoying trouble can often occur, which
does not require calling a technician out. In the
following chart information is given about them
to avoid unnecessary charges on service.
Important! The operation of the appliance
goes with certain sounds (compressor and
Problem
The compressor operates
continually
10
circulating sound). This not means a trouble, but
a normal operation.
Important! The appliance operates
discontinuously, so the stopping of compressor
does not mean being no current. That is why
you must not touch the electrical parts of the
appliance before breaking the circuit.
Possible cause
Solution
The Temperature Regulator may be
set incorrectly
Set a warmer temperature
The door does not close tightly or it
is not shut properly
Check if the doors close well and the
gaskets are undamaged and clean
The door has been opened too frequently
Do not leave the door open longer
than necessary
Food placed in the appliance was
too warm
Allow food to cool to room temperature before storing
www.zanussi.com
Problem
Possible cause
Solution
The temperature of the room that
contains the appliance is too high
for efficient operation
Try to reduce the temperature in the
room where the appliance stands
The lamp is in stand-by.
Close and open the door.
The lamp is defective.
Refer to "Replacing the lamp".
The Temperature Regulator may be
set incorrectly
Set a lower temperature
The door does not close tightly or it
is not shut properly
Check if the door closes well and the
gasket is undamaged and clean
Food placed in the appliance was
too warm
Allow food to cool to room temperature before storing
Large quantities of food to be
cooled were put in at the same time
Insert smaller quantities of food to be
cooled at any one time
There is no inside cool air circulation
Provide inside cool air circulation
It is too cold in the refrigerator
The Temperature Regulator may be
set incorrectly
Set a higher temperature
It is too warm in the freezer
Temperature Regulator may be set
incorrectly
Set a lower temperature
The door does not close tightly or it
is not shut properly
Check if the door closes well and the
gasket is undamaged and clean
Large quantities of food to be frozen
were put in at the same time
Insert smaller quantities of food to be
frozen at any one time.
Food placed in the appliance was
too warm
Allow food to cool to room temperature before storing.
Products to be frozen are placed
too closely to each other
Place the products in a way so that
cold air could circulate among them
It is too cold inside the
freezer
Temperature Regulator may be set
incorrectly
Set a warmer temperature
The appliance does not
work at all. The appliance
does not cool at all. Neither cooling nor lighting
works
The appliance may be switched off
Switch on the appliance
Plug is not connected to the mains
socket properly
Connect the mains plug properly
Power does not reach the appliance
Try connecting another electrical device to the power outlet
There is no voltage in the mains
socket (try to connect another appliance into it)
Call an electrician
The lamp does not work.
It is too warm in the refrigerator
www.zanussi.com
11
Replacing the lamp
The appliance is equipped with a longlife LED
interior light.
Only service is allowed to replace the lighting
device. Contact your Service Center.
2.
3.
If necessary, adjust the door. Refer to "Installation".
If necessary, replace the defective door
gaskets. Contact the Service Center.
Closing the door
1. Clean the door gaskets.
Technical data
Dimension of the recess
Height
1780 mm
Width
560 mm
Depth
560 mm
Rising Time
25 h
Voltage
230-240 V
Frequency
50 Hz
The technical information are situated in the rating plate on the internal left side of the appliance and in the energy label.
Installation
Caution! Read the "Safety Information"
carefully for your safety and correct
operation of the appliance before installing the
appliance.
Electrical Connection
Positioning
Install this appliance at a location where the ambient temperature corresponds to the climate
class indicated on the rating plate of the appliance:
Warning! This appliance must be earthed.
The manufacturer declines any liability
should these safety measures not be observed.
Climate
class
Ambient temperature
SN
+10°C to + 32°C
N
+16°C to + 32°C
ST
+16°C to + 38°C
T
+16°C to + 43°C
12
Caution! Any electrical work required to
install this appliance should be carried out
by a qualified electrician or competent person.
www.zanussi.com
A
fuse in the plug supplied, a 13 amp ASTA approved (BS 1362) fuse must be used.
B
Warning! A cut off plug inserted into a 13
amp socket is a serious safety (shock)
hazard. Ensure that it is disposed of safely.
C
Door reversibility
The door of the appliance opens to the right. If
you want to open the door to the left, do these
steps before you install the appliance:
D
E
S
Important! The wires in the mains lead are
coloured in accordance with the following code:
A Green and Yellow:
Earth
C Brown:
Live
D Blue:
Neutral
As the colours of the wires in the mains lead of
this appliance may not correspond with the coloured markings identifying the terminals in your
plug, proceed as follows:
1. Connect the wire coloured green and yellow to the terminal marked either with the
or colletter “E“ or by the earth symbol
oured green and yellow.
2. Connect the wire coloured blue to the terminal either marked with the letter “N“ or
coloured black.
3. Connect the wire coloured brown to the
terminal either marked with the “L“ or coloured red.
4. Check that no cut, or stray strands of wire
is present and the cord clamp E is secure
over the outer sheath.
5. Make sure the electricity supply voltage is
the same as that indicated on the appliance
rating plate.
6. Switch on the appliance.
The appliance is supplied with a 13 amp plug
fitted B. In the event of having to change the
www.zanussi.com
1 Loosen the upper
3 Loosen the middle
pin and remove the
hinge.
spacer.
2 Remove the upper
pin and the upper
door.
4 Remove the lower
door.
4 Loosen the lower
pin.
On the opposite side:
1 Install the lower
pin.
2 Install the lower
door.
3 Tighten the middle
hinge.
4 Install the upper
door.
5 Tighten the spacer
and the upper pin.
13
Ventilation requirements
The airflow behind the
appliance must be
sufficient.
6 cm
min. 200cm2
min.
200cm2
Installing the appliance
Caution! Make sure that the mains cable
can move freely.
Do the following steps:
x
2
x
1 If necessary cut
the adhesive sealing
strip and then apply it
to the appliance as
shown in figure.
14
I
4mm
1
2 Install the appliance in the niche.
Push the appliance in
the direction of the arrows (1) until the upper gap cover stops
against the kitchen
furniture.
Push the appliance in
the direction of the arrows (2) against the
cupboard on the opposite side of the
hinge.
44mm
I
4 Attach the appli3 Adjust the appliance to the niche with
ance in the niche.
4 screws.
Make sure that the
distance between the
appliance and the
cupboard front-edge
is 44 mm.
The lower hinge cover (in the accessories
bag) makes sure that
the distance between
the appliance and the
kitchen furniture is
correct.
Open the door. Put
the lower hinge cover
in position.
C
D
E
E
B
5 Remove the correct part from the
hinge cover (E). Make
sure to remove the
part DX, in the case
of right hinge, SX in
opposite case.
6 Attach the covers
(C, D) to the lugs and
the hinge holes.
Install the vent grille
(B).
Attach the hinge covers (E) to the hinge.
www.zanussi.com
Ha
Hb
Hb
Hc
7 Fix the appliance
to the side of the
kitchen unit, fit the
bracket (E) and (F),
adjust the distance,
and fix using the
screws (as in figure).
Fit the cover (D).
Hd
8 Disconnect the
parts (Ha), (Hb), (Hc)
and (Hd).
~50 mm
90o
Ha
21 mm
~50 mm
90o
21 mm
Hc
9 Install the part
10 Push the part (Hc)
(Ha) on the inner side on the part (Ha).
of the kitchen furniture.
8 mm
Hb
Hd
13 Place the small
14 Press the part
square on the guide
(Hd) on the part (Hb).
again and fix it with
the screws supplied.
Align the kitchen furniture door and the
appliance door by adjusting the part Hb.
Do a final check to make sure that:
• All screws are tightened.
• The magnetic sealing strip is attached tightly
to the cabinet.
Important! If the ambient temperature is low
(for example, in the Winter), the size of the
gasket decreases. The size of the gasket
increases when the ambient temperature
increases.
8 mm
K Ha
Hb
Ha
11 Open the appliance door and the
kitchen furniture door
at an angle of 90°.
Insert the small
square (Hb) into
guide (Ha).
Put together the appliance door and the
furniture door and
mark the holes.
www.zanussi.com
12 Remove the brackets and mark a distance of 8 mm from
the outer edge of the
door where the nail
must be fitted (K).
15
Environmental concerns
The symbol on the product or on its
packaging indicates that this product may not
be treated as household waste. Instead it
should be taken to the appropriate collection
point for the recycling of electrical and
electronic equipment. By ensuring this product
is disposed of correctly, you will help prevent
16
potential negative consequences for the
environment and human health, which could
otherwise be caused by inappropriate waste
handling of this product. For more detailed
information about recycling of this product,
please contact your local council, your
household waste disposal service or the shop
where you purchased the product.
www.zanussi.com
www.zanussi.com
17
18
www.zanussi.com
www.zanussi.com
19
222358281-A-082013
www.zanussi.com/shop