EN
User manual
Cooker
ZCI68300WA
ZCI68300XA
ZCI68300BA
Contents
Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2
Safety instructions _ _ _ _ _ _ _ _ _ _ _ _ _ _ 3
Product description _ _ _ _ _ _ _ _ _ _ _ _ _ 6
Before first use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 7
Hob - Daily use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 8
Hob - Helpful hints and tips _ _ _ _ _ _ _ _ 11
Hob - Care and cleaning _ _ _ _ _ _ _ _ _ 12
Oven - Daily use _ _ _ _ _ _ _ _ _ _ _ _ _ _
Oven - Clock functions _ _ _ _ _ _ _ _ _ _
Oven - Helpful hints and tips _ _ _ _ _ _ _
Oven - Care and cleaning _ _ _ _ _ _ _ _ _
What to do if… _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Installation _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Environment concerns _ _ _ _ _ _ _ _ _ _ _
13
14
16
20
22
22
24
Subject to change without notice.
Safety information
Before the installation and use of the appliance, carefully read the
supplied instructions. The manufacturer is not responsible if an incorrect installation and use causes injuries and damages. Always
keep the instructions with the appliance for future reference.
Children and vulnerable people safety
Warning! Risk of suffocation, injury or permanent disability.
• This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they are supervised by an adult or a person who is responsible for their safety.
• Do not let children play with the appliance. Children under 3
years must not be left unsupervised in the vicinity of the appliance.
• Keep all packaging away from children.
• Keep children and pets away from the appliance when it operates or when it cools down. Accessible parts are hot.
• If the appliance has a child safety device, we recommend that
you activate it.
• Cleaning and user maintenance shall not be made by children
without supervision.
General Safety
• The appliance and its accessible parts become hot during use.
Do not touch the heating elements.
2
www.zanussi.com
• Do not operate the appliance by means of an external timer or
separate remote-control system.
• Unattended cooking on a hob with fat or oil can be dangerous
and may result in fire.
• Never try to extinguish a fire with water, but switch off the appliance and then cover flame e.g. with a lid or a fire blanket.
• Do not store items on the cooking surfaces.
• Do not use a steam cleaner to clean the appliance.
• Metallic objects such as knives, forks, spoons and lids should
not be placed on the hob surface since they can get hot.
• Do not use harsh abrasive cleaners or sharp metal scrapers to
clean the glass door since they can scratch the surface, which
may result in shattering of the glass.
• If the glass ceramic surface is cracked, switch off the appliance
to avoid the possibility of electric shock.
• After use, switch off the hob element by its control and do not
rely on the pan detector.
• Ensure that the appliance is switched off before replacing the
lamp to avoid the possibility of electric shock.
• The means for disconnection must be incorporated in the fixed
wiring in accordance with the wiring rules.
• If the supply cord is damaged, it must be replaced by the manufacturer, an authorized Service or similarly qualified persons in
order to avoid a hazard.
Safety instructions
Installation
Warning! Only a qualified person must
install this appliance.
• Remove all the packaging.
• Do not install or use a damaged appliance.
• Obey the installation instruction supplied
with the appliance.
www.zanussi.com
• Always be careful when you move the appliance because it is heavy. Always wear safety gloves.
• Do not pull the appliance by the handle.
• Keep the minimum distance from the other
appliances and units.
• Make sure that the appliance is installed below and adjacent safe structures.
3
• The sides of the appliance must stay adjacent to appliances or to units with the same
height.
• Do not install the appliance on a platform.
• Do not install the appliance adjacent to a
door or under a window. This prevents hot
cookware to fall from the appliance when
the door or the window is opened.
Warning! Make sure to install a
stabilizing means in order to prevent
tipping of the appliance. Refer to Installation
chapter.
Electrical connection
Warning! Risk of fire and electrical
shock.
• All electrical connections should be made
by a qualified electrician.
• The appliance must be earthed.
• Make sure that the electrical information on
the rating plate agrees with the power supply. If not, contact an electrician.
• Always use a correctly installed shockproof
socket.
• Do not use multi-plug adapters and extension cables.
• Make sure not to cause damage to the
mains plug and to the mains cable. Contact
the Service or an electrician to change a
damaged mains cable.
• Do not let mains cables to come in touch
with the appliance door, specially when the
door is hot.
• The shock protection of live and insulated
parts must be fastened in such a way that it
cannot be removed without tools.
• Connect the mains plug to the mains socket
only at the end of the installation. Make sure
that there is access to the mains plug after
the installation.
• If the mains socket is loose, do not connect
the mains plug.
• Do not pull the mains cable to disconnect
the appliance. Always pull the mains plug.
4
• Use only correct isolation devices: line protecting cut-outs, fuses (screw type fuses removed from the holder), earth leakage trips
and contactors.
• The electrical installation must have an isolation device which lets you disconnect the
appliance from the mains at all poles. The
isolation device must have a contact opening width of minimum 3 mm.
Use
Warning! Risk of injury, burns or electric
shock.
• Use this appliance in a household environment.
• Do not change the specification of this appliance.
• Make sure that the ventilation openings are
not blocked.
• Do not let the appliance stay unattended
during operation.
• Deactivate the appliance after each use.
• Internally the appliance becomes hot when
in operation. Do not touch the heating elements that are in the appliance. Always use
oven gloves to remove or put in accessories
or ovenware.
• Be careful, when you open the appliance
door while the appliance is in operation. Hot
air can release.
• Do not operate the appliance with wet
hands or when it has contact with water.
• Do not apply pressure on the open door.
• Do not use an external timer or a separate
remote-control system to operate the appliance.
• Always keep the appliance door closed
when the appliance is in operation.
• Do not put cutlery or saucepan lids on the
cooking zones. They become hot.
• Set the cooking zone to “off” after use.
• Do not use the appliance as a work surface
or as a storage surface.
• If the surface of the appliance is cracked,
disconnect immediately the appliance from
www.zanussi.com
the power supply. This to prevent an electrical shock.
• Users with a pacemaker must keep a distance of minimum 30 cm from the induction
cooking zones when the appliance is in operation.
Warning! Risk of fire or explosion.
• Fats and oil when heated can release flammable vapours. Keep flames or heated objects away from fats and oils when you cook
with them.
• The vapours that very hot oil releases can
cause spontaneous combustion.
• Used oil, that can contain food remnants,
can cause fire at a lower temperature than
oil used for the first time.
• Do not put flammable products or items that
are wet with flammable products in, near or
on the appliance.
• Do not let sparks or open flames to come in
contact with the appliance when you open
the door.
• Open the appliance door carefully. The use
of ingredients with alcohol can cause a mixture of alcohol and air.
• Do not try to extinguish a fire with water.
Disconnect the appliance and cover the
flame with a lid or a fire blanket.
Warning! Risk of damage to the
appliance.
• To prevent damage or discoloration to the
enamel:
– Do not put ovenware or other objects in
the appliance directly on the bottom.
– Do not put aluminium foil directly on the
bottom of the appliance.
– do not put water directly into the hot appliance.
– do not keep moist dishes and food in the
appliance after you finish the cooking.
– be careful when you remove or install the
accessories.
www.zanussi.com
• Discoloration of the enamel has no effect on
the performance of the appliance. It is not a
defect in the sense of the warranty law.
• Use a deep pan for moist cakes. Fruit juices
cause stains that can be permanent.
• Do not keep hot cookware on the control
panel.
• Do not let cookware to boil dry.
• Be careful not to let objects or cookware fall
on the appliance. The surface can be damaged.
• Do not activate the cooking zones with
empty cookware or without cookware.
• Do not put aluminium foil on the appliance.
• Cookware made of cast iron, aluminium or
with a damaged bottom can cause scratches on the glass ceramic. Always lift these
objects up when you have to move them on
the cooking surface.
Care and Cleaning
Warning! Risk of injury, fire or damage to
the appliance.
• Before maintenance, deactivate the appliance and disconnect the mains plug from
the mains socket.
• Make sure the appliance is cold. There is
the risk that the glass panels can break.
• Replace immediately the door glass panels
when they are damaged. Contact the Service.
• Be careful when you remove the door from
the appliance. The door is heavy!
• Clean regularly the appliance to prevent the
deterioration of the surface material.
• Remaining fat or food in the appliance can
cause fire.
• Clean the appliance with a moist soft cloth.
Only use neutral detergents. Do not use
abrasive products, abrasive cleaning pads,
solvents or metal objects.
• If you use an oven spray, obey the safety instructions on the packaging.
• Do not clean the catalytic enamel (if applicable) with any kind of detergent.
5
Internal light
• The type of light bulb or halogen lamp used
for this appliance, is only for household appliances. Do not use it for house lighting.
Warning! Risk of electrical shock.
• Before replacing the lamp, disconnect the
appliance from the power supply.
• Only use lamps with the same specifications.
Disposal
Warning! Risk of injury or suffocation.
• Disconnect the appliance from the mains
supply.
• Cut off the mains cable and discard it.
• Remove the door catch to prevent children
and pets to get closed in the appliance.
Service
• Contact the Service to repair the appliance.
We recommend only the use of original
spare parts.
Product description
General overview
1
2
3
8
3
2
1
4
5
1 Control panel and hob
2 Air vents for the cooling fan
3 Heating element
4 Rating plate
5 Oven lamp
6 Fan and heating element
7 Shelf positions of the main oven
8 Shelf positions of the top oven
7
5
4
3
5
6
2
1
6
www.zanussi.com
Cooking surface layout
2
1
140 mm
1 Induction cooking zone 1400 W, with the
Power function 2500 W
2 Steam outlet
180 mm
3 Induction cooking zone 1800 W, with the
Power function 2800 W
4 Induction cooking zone 1800 W, with the
Power function 2800 W
5 Control panel
180 mm
210 mm
5
6
3
6 Induction cooking zone 2300 W, with the
Power function 3600 W
4
Control panel
1
2
3
6
4
1
5
Accessories
• Deep grill roasting pan
To bake and roast or as pan to collect fat.
• The roasting pan grid
1 Knobs for the hob
2 Knob for the top oven and grill
3 Electronic programmer
4 Knob for the main oven
5 Main oven indicator
6 Top oven indicator
To put in the deep roasting pan.
• Oven shelf
For cookware, cake tins, roasts.
Before first use
Warning! Refer to the Safety chapters.
Initial Cleaning
• Remove all parts from the appliance.
• Clean the appliance before first use.
When you connect the appliance to the electrical supply or after a power cut, the indicator
for the Time of Day function flashes.
Press the + or - button to set the correct time.
Caution! Do not use abrasive cleaning
agents! This can damage the surface.
Refer to chapter "Care and Cleaning".
Setting the time
You must set the time before you operate
the oven.
www.zanussi.com
7
After approximately five seconds, the flashing
stops and the display shows the time of day
you set.
To change the time, press
again and
again until the indicator for the Time of
Day function flashes. You must not set the Duor End
function at the same time.
ration
burn off any residue from the cavity surface.
Accessories can become hotter than in normal
use. During this period an odour can be emitted. This is normal. Make sure the room is well
ventilated.
Preheat the two ovens. Heat up one oven at a
time.
Preheating
Set an oven function and maximum temperature and run an empty oven for 45 minutes, to
Hob - Daily use
Warning! Refer to the Safety chapters.
Control panel layout
1
2
3
4
7
6
5
Use the sensor fields to operate the appliance. The indicators
and display show which function operates.
Sensor field
1
The timer display
2
3
Function
To show the time in minutes.
To set a cooking zone.
/
To increase or decrease the time.
4
To lock / unlock the control panel.
5
To activate the Power function.
6
To activate and deactivate the STOP+GO function.
7
8
A heat setting display
To show the heat setting.
www.zanussi.com
Heat setting displays
Display
Description
The cooking zone is off.
The cooking zone operates.
-
The
function is on.
The automatic heat-up function is on.
The Power function is on.
+ digit
There is a malfunction.
/
OptiHeat Control (3 step Residual heat indicator): continue cooking /
stay warm / residual heat.
/
Lock/Child safety function is on.
Cookware unsuitable or too small, or no cookware on the cooking zone.
The automatic switch-off is on.
Heat setting
To activate a coking zone or increase the heat
setting, turn the knob clockwise. The display
shows the heat setting.
To decrease the heat setting, turn the knob
counterclockwise. To deactivate, turn the knob
.
to the position
Automatic heat up
The automatic heat up function lets you get
the necessary heat setting in a shorter time. It
sets the highest heat setting for some time (refer to the diagram), and then decreases it to
the necessary heat setting.
To start the automatic heat up:
1. Turn the knob for the cooking zone to pocomes on in the display.
sition A.
2. Immediately set the necessary heat setting.
3. To deactivate the function, turn the knob
to the off position.
11
10
9
8
7
6
5
4
3
2
1
0
1
2
3
4
5
6
7
8
9
Power function
The Power function makes more power available to the induction cooking zones. The Power
function is activated for 10 minutes at most.
After that, the induction cooking zone automatically changes back to the highest heat
setting. To activate, turn the knob to the nec.
comes
essary heat setting, then touch
on in the display. To deactivate, change the
heat setting.
Power management
The power management divides the power between two cooking zones in a pair (see the illustration). The Power function increases the
power to the maximum level for one cooking
zone in the pair and decreases the power in
www.zanussi.com
9
the second cooking zone. The display for the
reduced zone changes between two levels.
When the set time ends, 00 flashes and
an acoustic signal sounds. The cooking
zone deactivates.
5.
Touch
to stop the signal.
To deactivate the timer before the set
time is completed, set the cooking zone
with
and touch -. The remaining time
counts down to 00. The indicator of the cooking zone goes out.
Power management for the right cooking
zones and the top oven
The right cooking zones and the top oven
use the same energy source (the same
electrical phase) when they operate at the
same time. The power management prevents a
circuit overload.
The more power the top oven uses during its
operation, the less is available for the right
cooking zones. When a zone cannot use the
full power, the display for the zone changes
between the two levels.
Timer
Use it to set an automatic switch-off time for a
cooking zone.
1. Set the cooking zone. Touch
again and
again until the indicator for the necessary
cooking zone comes on.
You must set the cooking zone before
you activate the timer.
2.
3.
4.
10
Set the heat setting for the cooking zone.
You can also set it after you activate the
timer.
To activate the timer or change the set
time, touch + or - on the hob control panel. The maximum time you can set is 99
minutes.
The indicator of the cooking zone flashes
slowly. The timer starts to count down.
again
To see the remaining time, touch
and again until the indicator for the necessary cooking zone flashes quickly. The
display shows the remaining time.
You can use the timer as a Minute Minder
when the cooking zones do not operate. To do
this, set the cooking zone and activate the timer but do not set the heat setting.
STOP+GO
function sets all cooking zones that
The
).
operate to a Keep Warm setting (
operates, you cannot change the
When
heat setting.
does not stop the timer function.
• To activate this function touch
.
comes on.
• To deactivate this function touch
. The
heat setting that you set before comes on.
Lock
When the cooking zones operate, you can
lock the control panel. It prevents an accidental change of the heat setting.
This function does not deactivate the timer
function.
1. Set the heat setting.
2. To activate this function, touch
. The
for 4 secdisplay shows the symbol
onds.
3. To deactivate this function, touch
. The
display shows the heat setting that you
set before.
When you deactivate the appliance, the
function is deactivated.
Child safety lock
This function prevents an accidental operation
of the hob.
www.zanussi.com
Activating the child safety lock
1. Make sure that the hob is deactivated.
There must be no symbols shown in the
control panel, except for
/
/
.
2. Touch
for 4 seconds. The symbol
flashes in the control panel.
3. Touch
while the symbol
flashes.
4.
for 4 seconds. The
The display shows
child safety lock is activated.
To deactivate the child safety lock, do the
steps again. The display shows
for 4
seconds. The child safety lock is deactivated.
Deactivating the child safety lock for one
cooking session
1. Activate and deactivate the necessary
cooking zone.
2. While the display shows
, touch
un.
til the display shows
3. Set the heat setting for the cooking zone
in less than 4 seconds.
4. When you deactivate the hob, the child
safety lock operates.
• All cooking zones are deactivated
.
• You spill something or put something on the
hob control panel for more than 10 seconds
(a pan, a cloth, etc.). An acoustic signal
sounds and the hob deactivates. Remove
the object or clean the control panel.
• The hob becomes too hot (e.g. when a saucepan boils dry). Before you use the hob
again, the cooking zone must be cool.
• You use incorrect cookware. The display
and the cooking zone
shows the symbol
deactivates automatically after 2 minutes.
• You do not deactivate a cooking zone or
change the heat setting. After some time
(see the table), the display shows the symand the hob deactivates.
bol
Heat setting
-
Switch-off time
6.0 h
5.0 h
4.0 h
-
1.5 h
Automatic switch-off
The hob deactivates automatically if:
Hob - Helpful hints and tips
Warning! Refer to the Safety chapters.
Cookware for induction cooking zones
Important! In induction cooking, a powerful
electromagnetic field almost instantly
generates heat inside the cookware.
Cookware material
• Correct: cast iron, steel, enamelled steel,
stainless steel, a multi-layer bottom (marked
as correct by the manufacturer).
• Incorrect: aluminium, copper, brass, glass,
ceramic, porcelain.
Cookware is correct for an induction hob
if:
• Water boils very quickly on a zone set to the
highest heat setting.
www.zanussi.com
• You can attach a magnet to the bottom of
the cookware.
The bottom of the cookware must be
as thick and flat as possible.
Cookware dimensions: induction cooking
zones adapt to the dimension of the bottom of
the cookware automatically to some limit. But
the magnetic part of the bottom of the cookware must have a minimum diameter.
Cooking zone
Minimum cookware
diameter [mm]
Right rear —
180 mm
145
Right front —
180 mm
145
11
Cooking zone
Minimum cookware
diameter [mm]
Left rear —
145 mm
125
Left front —
210 mm
180
Operating noises
ware is made of different materials (Sandwich construction).
• humming: you use high power levels.
• clicking: electric switching occurs.
• hissing, buzzing: the fan operates.
The noises are normal and do not refer
to any defects.
Energy saving
If you can hear
• cracking noise: cookware is made of different materials (Sandwich construction).
• whistling: you use one or more cooking
zones with high power levels and the cook-
• If possible, always put the lids on the
cookware.
• Put cookware on a cooking zone before you start it.
Examples of cooking applications
Heat
setting
Use to:
Time
(min)
1
Keep cooked food warm.
as necessary
Put a lid on the cookware.
1-2
Hollandaise sauce, melt: butter, chocolate,
gelatine.
5 - 25
Mix from time to time.
1-2
Solidify: fluffy omelettes, baked eggs.
10 - 40
Put a lid on the cookware.
2-3
Simmer rice and milkbased dishes, heating
up ready-cooked meals.
25 - 50
Add at least twice as much liquid as
rice, mix milk dishes at some point
during the procedure.
3-4
Steam vegetables, fish, meat.
20 - 45
Add some tablespoons of liquid.
4-5
Steam potatoes.
20 - 60
Use max. ¼ l water for 750 g of potatoes.
4-5
Cook larger quantities of food, stews and
soups.
60 - 150
Up to 3 l of liquid plus ingredients.
6-7
Gentle frying: escalope, veal cordon bleu,
cutlets, rissoles, sausages, liver, roux,
eggs, pancakes, doughnuts.
as necessary
Turn halfway through.
7-8
Heavy frying, hash browns, loin steaks,
steaks.
5 - 15
Turn halfway through.
9
Boil large quantities of water, cook pasta, sear meat (goulash, pot roast), deep fry chips.
The data in the table is for guidance only.
Hints
The Power function is suitable for heating
large quantities of water.
Hob - Care and cleaning
Warning! Refer to the Safety chapters.
Clean the appliance after each use.
Always use cookware with clean bottom.
12
Scratches or dark stains on the glass ceramic have no effect on how the appliance operates.
www.zanussi.com
To remove the dirt:
1. – Remove immediately:melted plastic,
plastic foil, and food with sugar. If not,
the dirt can cause damage to the appliance. Use a special scraper for the
glass . Put the scraper on the glass surface at an acute angle and move the
blade on the surface .
– Remove after the appliance is sufficiently cool:limescale rings , water
rings, fat stains, shiny metallic discolorations. Use a special cleaning agent for
glass ceramic or stainless steel.
2. Clean the appliance with a moist cloth
and some detergent.
3. At the end rub the appliance dry with
a clean cloth.
Oven - Daily use
Warning! Refer to the Safety chapters.
Cooling fan
When the appliance operates, the cooling fan
switches on automatically to keep the surfaces
of the appliance cool. If you switch off the appliance, the cooling fan continues to operate
until the appliance cools down.
2.
The temperature indicator comes on while
the temperature in the appliance increases.
To deactivate the appliance, turn the knob
for the top / main oven functions to the
Off position.
Activating and deactivating the top /
main oven
1. Turn the knob for the top / main oven
functions to an oven function.
Top oven functions
Oven function
100-250
Application
OFF position
The appliance is OFF.
Oven lamp
To illuminate the oven interior.
Conventional
Cooking
This function is particularly suitable for cooking larger quantities of food.
Dual Circuit Grill
To grill food items in medium quantities in the middle of the shelf. To
make toast.
Full Grill
The full grill element is on. To grill flat food items in large quantities. To
make toast.
Main oven functions
Oven function
OFF position
www.zanussi.com
Application
The appliance is OFF.
13
Oven function
100-250
Application
Oven lamp
To illuminate the oven interior.
Defrost
To thaw frozen food. The knob for the temperature must be on the OFF
position.
Thermaflow
This function is particularly suitable for cooking larger quantities of
food.
Grilling set
The grilling set includes the roasting pan grid
and the deep roasting pan. You can use the
roasting pan grid on the two sides.
Put the deep roasting pan in the oven at the
necessary level.
Warning! Risk of burns when removing
the accessories from a hot oven.
You can use the grilling set to roast larger
pieces of meat or
poultry on one level:
You can use the grilling set to grill flat
dishes in large quantities and to toast:
Put the roasting pan
grid inside the deep
roasting pan so that
the supports of the
oven shelf point upwards.
Put the roasting pan
grid inside the deep
roasting pan so that
the supports of the
oven shelf point
downwards.
Oven - Clock functions
Electronic programmer
Electronic programmer works only with
the main oven.
14
www.zanussi.com
1
2
1
1 Function indicators
2 Time display
3 Button +
4 Selection button
5 Button -
5
4
3
Clock function
Time of day
Minute Minder
Duration
End
Application
To set, change or check the time of day.
To set a countdown time. An acoustic signal sounds after the time period
is completed. This function has no effect on the operation of the
oven.
To set how long the appliance must operate.
To set when the appliance must be deactivated.
You can use Duration
and End
at
the same time to set the time when the
appliance must be activated and then deacti, then End
.
vated. First set Duration
Setting the clock functions
1. For Duration
and End
, set an oven
function and temperature. This is not nec.
essary for the Minute Minder
2. Press the Selection button again and
again until the indicator for the necessary
clock function flashes.
3.
Press + or - to set the necessary clock
function.
The display shows the indicator for the
clock function you set. When the set time
ends, the indicator flashes and an acoustic signal sounds for two minutes.
With the Duration
and End
functions, the appliance deactivates automatically.
4.
5.
Press a button to stop the signal.
Turn the knob for the oven functions and
the knob for the temperature to the off position.
Cancelling the clock functions
1. Press the Selection button again and
again until the necessary function indicator flashes.
2. Press and hold the button -.
The clock function goes out after some
seconds.
www.zanussi.com
15
Oven - Helpful hints and tips
Warning! Refer to the Safety chapters.
The temperature and baking times in the
tables are guidelines only. They depend
on the recipes, quality and quantity of the ingredients used.
Caution! Use a Deep grill roasting pan
for very moist cakes. Fruit juices can
cause permanent stains on the enamel.
Top oven
The top oven is the smaller of the two ovens. It
has 3 shelf levels. Use is to cook smaller
quantities of food. It gives especially good results when used to cook fruitcakes, sweets
and savoury flants or quiche.
Main oven
The main oven is particularly suitable for cooking larger quantities of food.
Baking
General instructions
• Your new oven may bake or roast differently
to the appliance you had before. Adapt your
usual settings (temperature, cooking times)
and shelf levels to the values in the tables.
• With longer baking times, the oven can be
switched off about 10 minutes before the
end of baking time, to use the residual heat.
When you use frozen food, the trays in
the oven can twist during baking. When
the trays get cold again, the distortion
will be gone.
How to use the Baking Tables
• We recommend to use the lower temperature the first time.
• If you cannot find the settings for a special
recipe, look for the one that is almost the
same.
• Baking time can be extended by 10-15 minutes, if you bake cakes on more than one
level.
• Cakes and pastries at different heights do
not always brown equally at first. If this occurs, do not change the temperature setting. The differences equalize during the
baking procedure.
Tips on baking
Baking results
Possible cause
Remedy
The cake is not browned
sufficiently below
Incorrect oven level
Put the cake on a lower oven level
The cake sinks (becomes soggy, lumpy,
streaky)
Oven temperature too high
Use a lower setting
The cake sinks (becomes soggy, lumpy,
streaky)
Baking time is too short
Set a longer baking time
Do not set higher temperatures to decrease baking times
The cake sinks (becomes soggy, lumpy,
streaky)
Too much liquid in the mixture
Use less liquid. Look at the mixing times, specially when you use mixing machines
Cake is too dry
Oven temperature too low
Set a higher oven temperature
Cake is too dry
Baking time too long
Set a shorter baking time
Cake does not brown
equally
Oven temperature too high
and baking time too short
Set a lower oven temperature and a longer
baking time
Cake does not brown
equally
No equal mixture
Put the mixture equally on the baking tray
16
www.zanussi.com
Baking results
Cake does not cook in
the baking time set
Possible cause
Temperature too low
Top Oven
Shelf Positions are not critical but ensure
that oven shelves are evenly spaced
Remedy
Use a slightly higher oven temperature setting
when more than one is used (e.g. shelf positions 1 and 3)
Baking
Shelf Position
Temperature
[°C]
Approx Cook Time
(mins)
Biscuits
2
170 - 190
10 - 20
Bread
2
200 - 220
30 - 35
Bread rolls/buns
2
200 - 220
10 -15
Cakes: Small & Queen
2
160 - 180
18 - 25
Cakes: Sponges
2
160 - 175
20 - 30
Cakes: Victoria Sandwich
2
160 -170
18 - 25
Cakes: Madeira
2
140 - 150
75 - 90
Cakes: Rich Fruit
2
140 - 150
120 - 150
Cakes: Gingerbread
2
140 - 150
80 - 90
Cakes: Meringues
2
90 - 100
150 - 180
Cakes: Flapjack
2
160 - 170
25 -30
Cakes: Shortbread
2
130 - 150
45 - 60
Cakes: Apple Pie
2
170 - 180
50 - 60
Casseroles: Beef/Lamb
2
160 -170
150 - 180
Casseroles: Chicken
2
160 - 180
80 - 90
Convenience Foods
2
Fish
2
170 - 190
20 - 30
Fish Pie (Potato Topped)
2
190 - 200
20 - 30
Fruit Pies, Crumbles
2
190 - 200
30 - 50
Milk Puddings
2
150 - 170
90 -120
Pasta Lasagne etc.
2
170 - 180
40 -50
Pastry: Choux
2
180 - 190
30 - 40
Pastry: Eclairs, Profiteroles
2
180 - 190
30 - 40
Pastry: Flaky/Puff Pies
2
210 - 220
30 - 40
Shortcrusts: Mince Pies
2
190 - 200
15 - 20
Shortcrusts: Meat Pies
2
190 - 210
25 - 35
Food
www.zanussi.com
Follow manufacturer`s instructions
17
Shelf Position
Temperature
[°C]
Approx Cook Time
(mins)
Shortcrusts: Quiche,
Tarts, Flans
2
180 - 200
25 - 50
Scones
3
220 - 230
8 - 12
Shepard`s Pie
2
190 - 200
30 - 40
Souffles
2
170 - 180
20 - 30
Vegetables: Baked Jacket Potatos
2
180 - 190
60 - 90
Vegetables: Roast Potatos
2
180 - 190
60 - 90
Yorkshire Pudding Large
2
220 - 210
25 - 40
Yorkshire Pudding Individual
2
210 - 220
15 - 25
Roasting Meat, Poultry
2
Food
Main Oven
Shelf Positions are not critical but ensure
that oven shelves are evenly spaced
See roasting chart
when more than one is used (e.g. shelf positions 1 and 3)
Baking
Temperature
[°C]
Approx Cook Time
(mins)
Shelf Position
Biscuits
180 - 190
10 - 20
1/3
Bread
190 - 210
30 - 35
2
Cakes: Small & Queen
150 - 170
18 - 25
1/3
Cakes: Sponges
160 - 170
20 - 25
3
Cakes: Madeira
140 - 160
60 - 80
3
Cakes: Rich Fruit
130 - 140
120 - 150
3
Cakes: Christmas
130 - 140
180 - 270
3
Cakes: Apple Pie
160 - 170
50 - 60
3
- Shortbread
130 - 150
45 - 60
1/3
Fish
160 - 180
30 - 40
3
Fruit Pies, Crumbles
170 - 180
30 - 50
3
Milk Puddings
140 - 160
60 - 90
3
Pastry: Choux
180 - 190
30 - 40
3
Pastry: Shortcrust
180 - 190
25 - 35
3
180 - 190
30 -40
3
Food
Pastry: Flaky
Pastry: Puff
18
Follow manufacturer`s instructions. Reduce the
temperature for Fan oven by 20°C
3
www.zanussi.com
Temperature
[°C]
Approx Cook Time
(mins)
Shelf Position
Plate Tarts
180 - 190
25 - 45
3
Quiches/Flans
170 - 180
25 - 45
3
Scones
210 - 230
8 - 12
1/3
160 - 180
see Roasting Chart
2
Food
Roasting: Meat, Poultry
Roasting
Roasting dishes
• Use heat-resistant ovenware to roast
(please read the instructions of the manufacturer).
• Large roasting joints can be roasted directly
in the deep roasting pan or on the oven
shelf above the deep roasting pan. (If
present)
• Roast lean meats in a roasting tin with a lid.
This well keep the meat more succulent.
• All types of meat, that can be browned or
have crackling, can be roasted in the roasting tin without the lid.
Thermaflow or Conventional Cooking (if available)
Roasting
Meat
Beef/Beef boned
Mutton/Lamb
Pork/Veal/Ham
Chicken
Temperature [°C]
Cooking Time
170 - 190
20-35 minutes per 0.5 kb (1 lb) and
20-30 minutes over
170 - 190
20-35 minutes per 0.5 kb (1 lb) and
25-35 minutes over
170 - 190
30-40 minutes per 0.5 kb (1 lb) and
30-40 minutes over
180 - 200
20-25 minutes per 0.5 kb (1 lb) and
20 minutes over
170 - 190
15-20 minutes per 0.5 kg (1 lb) up to
3.5 kg (7 lb) then 10 minutes per 0.5
kg (1 lb) over 3.5 kg (7 lb)
180 - 200
25-35 minutes per 0.5 kb (1 lb) and
25-30 minutes over
170 -190
35-40 minutes per 0.5 kb (1 lb) and
35-40 minutes over
170 - 190
20 minutes per 0.5 kb (1 lb) and 20minutes over
Turkey/Goose
Duck
Pheasant
Rabbit
Grilling
Always use the grilling function with
maximum temperature setting
• Set the grilling set in the shelf level as recommended in the grilling table.
• Grill only flat pieces of meat or fish.
Important! Always grill with the oven door
closed
Top Oven - Dual Circuit Grill
Always pre-heat the empty oven with the
grill functions for 5 minutes.
www.zanussi.com
Adjust shelf position and grilling set to
suit different thicknesses of food.
19
Grilling
Food
Shelf Position
Grill Time (min)
Bacon Rashers
3
5-6
Beefburgers
3
10 - 20
Chicken Joints
2
20 - 40
Chops - Lamb
2-3
15 - 25
Chops - Pork
2-3
20 - 25
Fish - Whole/Trout/Makarel
2
10 - 12
Fillets - Plaice/Cod
2
4-6
Kebabs
2-3
12 - 18
Kidneys - Lamb/Pig
2-3
6 - 10
Sausages
3
20 - 30
Steaks: Rare
3
4-6
Steaks: Medium
3
6-8
Steaks: Well Done
3
12 - 15
Toasted Sandwiches
3
3- 4
Defrosting
• Put the food out of the packaging and set it
on a plate on the oven shelf.
• Do not cover with a plate or bowl. This can
extend the time to defrost very much.
• Put the oven shelf in the first shelf level from
the bottom.
Oven - Care and cleaning
Warning! Refer to the Safety chapters.
• Clean the front of the appliance with a soft
cloth with warm water and cleaning agent.
• To clean metal surfaces use a usual cleaning agent
• Clean the oven interior after each use. Thus
you can remove dirt more easily and it does
not burn on.
• Clean stubborn dirt with a special oven
cleaner.
• Clean all oven accessories (with a soft cloth
with warm water and cleaning agent) after
each use and let them dry.
• If you have nonstick accessories, do not
clean them using an aggressive agents,
sharp edged objects or dishwasher. It can
destroy nonstick coating!
20
Stainless steel or aluminium appliances:
Clean the oven door with a wet sponge only.
Dry it with a soft cloth.
Do not use steel wool, acids or abrasive materials as they can damage the oven surface.
Clean the oven control panel with the same
precautions
Catalytic walls (selected models only)
The walls with a catalytic coating are selfcleaning. They absorb fat which collects on
walls while the oven operates.
To support this self-cleaning process
heat the oven without any food regularly:
• Turn the oven light on.
• Remove accessories from the oven.
• Set the Conventional Cooking function.
www.zanussi.com
• Set the oven temperature to 250 °C and let
oven operate for 1 hour.
• Clean the oven cavity with a soft and damp
sponge.
Warning! Do not attempt to clean
catalytic surface with oven sprays,
abrasive cleaners, soap or other cleaning
agents. This will damage the catalytic surface.
Removing the glass:
1. Push the door trim at one side to remove it.
Refer to the picture.
2. Pull up the trim.
3. Remove the glass panels.
A
Discolouration of the catalytic surface has
no effect on catalytic properties.
Cleaning the top oven glass panels
The door glass on your product can be
different in type and shape from what you
see in diagrams. The number of glasses can
be different.
2
1
Removing the glass:
1. Open the door.
2. Push the door trim at both sides to release
the clips. Refer to the picture.
3. Remove the glass panels.
To replace the glass panels obey the procedure in opposite sequence. Before you
lower the trim attach the A trim part to the
door. Refer to picture.
1
Oven lamp
Warning! There is a danger of electrical
shock!
2
Before you change the oven lamp:
• Switch off the oven.
• Remove the fuses in the fuse box or switch
off the circuit breaker.
Put a cloth on the bottom of the oven for
protection of the oven light and glass
cover.
1
To replace the glass obey the procedure
in opposite sequence.
Cleaning the oven door
The door glass on your product can be
different in type and shape from what you
see in diagrams. The number of glasses can
be different.
www.zanussi.com
Replacing the oven lamp
1. You can find the lamp glass cover at the
back of the cavity.
Turn the lamp glass cover counterclockwise to remove it.
2. Clean the glass cover.
3. Replace the oven lamp with applicable
300°C heat-resistant oven lamp.
21
Important! Use the same oven lamp type.
4.
Install the glass cover.
What to do if…
Warning! Refer to the Safety chapters.
Problem
Possible cause
Remedy
The hob does not operate
The heat setting is not set
Set the heat setting
The oven does not heat up
The oven is not switched on
Switch on the oven
The oven does not heat up
The clock is not set
Set the clock
The oven does not heat up
The necessary settings are not
set
Control the settings
The oven does not heat up
The fuse in the fuse box is released
Control the fuse. If the fuse is released more than one time, refer
to a qualified electrician.
The oven lamp does not operate
The oven lamp is defective
Replace the oven lamp
Steam and condensation settle
on the food and in the oven cavity
You left the dish in the oven for
too long
Do not leave the dishes in the
oven for longer than 15-20 minutes after the cooking process
ends
The display shows “12.00”
A power cut
Reset the clock
The residual heat indicator does
not come on
The cooking zone is not hot because it operated only for a short
time.
If the cooking zone must be hot,
speak to the Service Centre.
If you cannot find a solution to the problem
yourself, contact your dealer or the service
centre.
The necessary data for the service centre is on
the rating plate. The rating plate is on the front
frame of the oven cavity.
We recommend that you write the data here:
Model (MOD.)
.........................................
Product number (PNC)
.........................................
Serial number (S.N.)
.........................................
Installation
Warning! Refer to the Safety chapters.
Technical data
Dimensions
Height
894-912 mm
Width
596 mm
22
Dimensions
Depth
600 mm
Top oven capacity
37 l
Main oven capacity
74 l
www.zanussi.com
Location of the appliance
You can install your freestanding appliance
with cabinets on one or two sides and in the
corner.
B
A
The anti-tilt protection has two parts (A+B).
You can find the anti-tilt protection (B) on right
or left side of the rear wall of the appliance
(See fig. 1). You must install the anti-tilt protection (A) on the wall. The distance of the
hole of the anti-tilt protection (A) from the floor
is about 816 mm. Make sure you install the anti-tilt protection (A) at the correct height.
Screw it into the solid material or use applicable reinforcement.
Check that the anti-tilt protection projects minimum 20 mm into the hole in the back of the
appliance (B) when you push the appliance
(See fig. 2). If the space between the bench
cupboards is greater than the width of the appliance, you must adjust the side measurement
to centre the appliance. Make sure that the
surface behind the appliance is smooth.
A
1
Minimum distances
Dimension
A
2
685
Levelling
Use small feet on the bottom of appliance to
set same level of cooker top surface with other
surfaces
50 mm
A
mm
B
60 mm
2
B
Electrical installation
Warning! Only a qualified and
competent person must do the electrical
installation.
The anti-tilt protection
Caution! You must install the anti-tilt
protection (A+B). If you do not install it
the appliance can tilt.
Before you install anti-tilt protection, adjust the
appliance to the correct height.
www.zanussi.com
The manufacturer is not responsible if you
do not follow safety precautions from the
chapter "Safety information".
This appliance is supplied without a main plug
or a main cable.
23
Covering terminal board
The recommended cross-section area is six
square millimetres (6 mm²).
When you refit the mains terminal cover, make
sure that the lower tabs are located inside the
bottom edge of the aperture, before you fix the
two screws into the top edge of the mains terminal cover.
Make sure that the cover is securely fastened.
To open the cover of terminal board obey
the procedure in opposite sequence.
Terminal board
Make sure that the links are fitted as shown.
L
L
N
N
N
Do not remove blanking plates.
Environment concerns
Recycle the materials with the symbol . Put
the packaging in applicable containers to
recycle it.
Help protect the environment and human
health and to recycle waste of electrical and
electronic appliances. Do not dispose
appliances marked with the symbol with the
household waste. Return the product to your
local recycling facility or contact your
municipal office.
24
Warning! Refer to the Safety chapters.
Packaging material
The packaging material is environmentally-friendly and recyclable. Plastic parts are
marked with international abbreviations such
as PE, PS, etc. Dispose of the packaging material in the containers provided for this purpose at your local waste management facility.
www.zanussi.com
www.zanussi.com
25
26
www.zanussi.com
www.zanussi.com
27
892957527-B-432013
www.zanussi.com/shop