EN
User Manual
Hob
ZEV6940XBV
Contents
Safety information
Safety instructions
Product description
Daily use
Hints and tips
2
3
5
5
6
Care and cleaning
Troubleshooting
Installation
Technical information
Energy efficiency
6
7
7
9
10
Subject to change without notice.
Safety information
Before the installation and use of the appliance, carefully read the
supplied instructions. The manufacturer is not responsible if an
incorrect installation and use causes injuries and damages.
Always keep the instructions with the appliance for future
reference.
Children and vulnerable people safety
•
•
•
•
•
•
•
This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have
been given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards involved.
Do not let children play with the appliance.
Keep all packaging away from children.
Keep children and pets away from the appliance when it
operates or when it cools down. Accessible parts are hot.
If the appliance has a child safety device, we recommend you
activate it.
Cleaning and user maintenance shall not be made by children
without supervision.
Children of less than 3 years should be kept away unless
continuously supervised.
General Safety
•
•
2
The appliance and its accessible parts become hot during use.
Do not touch the heating elements.
Do not operate the appliance by means of an external timer or
separate remote-control system.
www.zanussi.com
•
•
•
•
•
•
•
Unattended cooking on a hob with fat or oil can be dangerous
and may result in fire.
Never try to extinguish a fire with water, but switch off the
appliance and then cover flame e.g. with a lid or a fire blanket.
Do not store items on the cooking surfaces.
Metallic objects such as knives, forks, spoons and lids should
not be placed on the hob surface since they can get hot.
Do not use a steam cleaner to clean the appliance.
If the glass ceramic surface / glass surface is cracked, switch
off the appliance to avoid the possibility of electric shock.
If the supply cord is damaged, it must be replaced by the
manufacturer, an authorized Service or similarly qualified
persons in order to avoid a hazard.
Safety instructions
Installation
Electrical Connection
WARNING!
Only a qualified person must install
this appliance.
•
•
•
•
•
•
•
•
•
•
Remove all the packaging.
Do not install or use a damaged appliance.
Obey the installation instruction supplied
with the appliance.
Keep the minimum distance from the other
appliances and units.
Always be careful when you move the
appliance because it is heavy. Always wear
safety gloves.
Seal the cut surfaces with a sealant to
prevent moisture to cause swelling.
Protect the bottom of the appliance from
steam and moisture.
Do not install the appliance adjacent to a
door or under a window. This prevents hot
cookware to fall from the appliance when the
door or the window is opened.
If the appliance is installed above drawers
make sure that the space, between the
bottom of the appliance and the upper
drawer, is sufficient for air circulation.
The bottom of the appliance can get hot.
Make sure to install a non-combustile
separation panel under the appliance to
prevent access to the bottom.
www.zanussi.com
WARNING!
Risk of fire and electrical shock.
•
•
•
•
•
•
•
•
•
•
•
•
All electrical connections should be made by
a qualified electrician.
The appliance must be earthed.
Before carrying out any operation make sure
that the appliance is disconnected from the
power supply.
Make sure that the electrical information on
the rating plate agrees with the power
supply. If not, contact an electrician.
Make sure the appliance is installed
correctly. Loose and incorrect electricity
mains cable or plug (if applicable) can make
the terminal become too hot.
Use the correct electricity mains cable.
Do not let the electricity mains cable tangle.
Make sure that a shock protection is
installed.
Use the strain relief clamp on the cable.
Make sure the mains cable or plug (if
applicable) does not touch the hot appliance
or hot cookware, when you connect the
appliance to the near sockets
Do not use multi-plug adapters and
extension cables.
Make sure not to cause damage to the
mains plug (if applicable) or to the mains
cable. Contact our Authorised Service
3
•
•
•
•
•
•
Centre or an electrician to change a
damaged mains cable.
The shock protection of live and insulated
parts must be fastened in such a way that it
cannot be removed without tools.
Connect the mains plug to the mains socket
only at the end of the installation. Make sure
that there is access to the mains plug after
the installation.
If the mains socket is loose, do not connect
the mains plug.
Do not pull the mains cable to disconnect
the appliance. Always pull the mains plug.
Use only correct isolation devices: line
protecting cut-outs, fuses (screw type fuses
removed from the holder), earth leakage trips
and contactors.
The electrical installation must have an
isolation device which lets you disconnect
the appliance from the mains at all poles.
The isolation device must have a contact
opening width of minimum 3 mm.
Use
WARNING!
•
•
•
•
WARNING!
Risk of damage to the appliance.
•
•
•
•
•
•
Risk of injury, burns and electrical
shock.
•
•
•
•
•
•
•
•
•
•
•
Remove all the packaging, labelling and
protective film (if applicable) before first use.
Use this appliance in a household
environment.
Do not change the specification of this
appliance.
Make sure that the ventilation openings are
not blocked.
Do not let the appliance stay unattended
during operation.
Set the cooking zone to “off” after each use.
Do not put cutlery or saucepan lids on the
cooking zones. They can become hot.
Do not operate the appliance with wet hands
or when it has contact with water.
Do not use the appliance as a work surface
or as a storage surface.
If the surface of the appliance is cracked,
disconnect immediately the appliance from
the power supply. This to prevent an
electrical shock.
When you place food into hot oil, it may
splash.
WARNING!
Risk of fire and explosion
4
Fats and oil when heated can release
flammable vapours. Keep flames or heated
objects away from fats and oils when you
cook with them.
The vapours that very hot oil releases can
cause spontaneous combustion.
Used oil, that can contain food remnants,
can cause fire at a lower temperature than
oil used for the first time.
Do not put flammable products or items that
are wet with flammable products in, near or
on the appliance.
•
Do not keep hot cookware on the control
panel.
Do not let cookware to boil dry.
Be careful not to let objects or cookware fall
on the appliance. The surface can be
damaged.
Do not activate the cooking zones with
empty cookware or without cookware.
Do not put aluminium foil on the appliance.
Cookware made of cast iron, aluminium or
with a damaged bottom can cause
scratches on the glass / glass ceramic.
Always lift these objects up when you have
to move them on the cooking surface.
This appliance is for cooking purposes only.
It must not be used for other purposes, for
example room heating.
Care and cleaning
•
•
•
•
•
Clean regularly the appliance to prevent the
deterioration of the surface material.
Deactivate the appliance and let it cool
down before you clean it.
Disconnect the appliance from the electrical
supply before maintenance.
Do not use water spray and steam to clean
the appliance.
Clean the appliance with a moist soft cloth.
Only use neutral detergents. Do not use
abrasive products, abrasive cleaning pads,
solvents or metal objects.
Disposal
WARNING!
Risk of injury or suffocation.
•
Contact your municipal authority for
information on how to discard the appliance
correctly.
www.zanussi.com
•
Disconnect the appliance from the mains
supply.
Cut off the mains cable and discard it.
•
•
Use original spare parts only.
Service
•
To repair the appliance contact an
Authorised Service Centre.
Product description
Cooking surface layout
1 Cooking zone
2 Control knobs
3 Residual heat indicator
1
1
145 mm
180 mm
210 mm
145 mm
1
3
1
2
Control knob
Symbol
Residual heat indicator
Function
Assignment of the control knob
0
Off position
1-9
Heat settings
WARNING!
There is a risk of burns from residual
heat.
The indicator comes on when a cooking zone is
hot.
Daily use
WARNING!
Refer to Safety chapters.
www.zanussi.com
The heat setting
To set or change the heat setting turn the knob
to the correct heat setting. To deactivate turn
the knob to off position.
5
Hints and tips
Examples of cooking applications
WARNING!
Refer to Safety chapters.
The data in the table is for guidance
only.
Cookware
The bottom of the cookware must be
as thick and flat as possible.
Cookware made of enamelled steel
and with aluminium or copper
bottoms can cause the colour
change on the glass-ceramic
surface.
Heat setting
Use to:
Time
(min)
Hints
1
Keep cooked food warm.
as neces- Put a lid on the cookware.
sary
1-2
Hollandaise sauce, melt: butter,
chocolate, gelatine.
5 - 25
Mix from time to time.
1-2
Solidify: fluffy omelettes, baked
eggs.
10 - 40
Cook with a lid on.
2-3
Simmer rice and milkbased dishes,
heating up ready-cooked meals.
25 - 50
Add the minimum twice as much
liquid as rice, mix milk dishes part
procedure through.
3-4
Steam vegetables, fish, meat.
20 - 45
Add some tablespoons of liquid.
4-5
Steam potatoes.
20 - 60
Use max. ¼ l water for 750 g of
potatoes.
4-5
Cook larger quantities of food,
stews and soups.
60 - 150
Up to 3 l liquid plus ingredients.
6-7
Gentle fry: escalope, veal cordon
bleu, cutlets, rissoles, sausages, liver, roux, eggs, pancakes, doughnuts.
as neces- Turn halfway through.
sary
7-8
Heavy fry, hash browns, loin steaks,
steaks.
5 - 15
9
Boil water, cook pasta, sear meat (goulash, pot roast), deep-fry chips.
Turn halfway through.
Care and cleaning
WARNING!
Refer to Safety chapters.
6
General information
•
•
Clean the hob after each use.
Always use cookware with clean bottom.
www.zanussi.com
•
•
•
Scratches or dark stains on the surface have
no effect on how the hob operates.
Use a special cleaner applicable for the
surface of the hob.
Use a special scraper for the glass.
•
Cleaning the hob
•
Remove immediately: melted plastic,
plastic foil, and food with sugar. If not, the
dirt can cause damage to the hob. Put the
special scraper on the glass surface at an
acute angle and move the blade on the
surface.
Remove when the hob is sufficiently
cool: limescale rings, water rings, fat stains,
shiny metallic discoloration. Clean the hob
with a moist cloth and some detergent. After
cleaning, rub the hob dry with a soft cloth.
Troubleshooting
WARNING!
Refer to Safety chapters.
What to do if...
Problem
You cannot activate or operate
the hob.
Residual heat indicator does not
come on.
Possible cause
Remedy
The hob is not connected to an
electrical supply or it is connected incorrectly.
Check if the hob is correctly connected to the electrical supply.
Refer to the connection diagram.
The fuse is released.
Make sure that the fuse is the
cause of the malfunction. If the
fuse releases again and again,
contact a qualified electrician.
The zone is not hot because it
operated only for a short time.
If the zone operated sufficiently
long to be hot, speak to an Authorised Service Centre.
If you cannot find a solution...
If you cannot find a solution to the problem
yourself, contact your dealer or an Authorised
Service Centre. Give the data from the rating
plate. Give also three digit letter code for the
glass ceramic (it is in the corner of the glass
surface) and an error message that comes on.
Make sure, you operated the hob correctly. If
not the servicing by a service technician or
dealer will not be free of charge, also during the
warranty period. The instructions about the
Service Centre and conditions of guarantee are
in the guarantee booklet.
Installation
WARNING!
Refer to Safety chapters.
Before the installation
Before you install the hob, write down the
information bellow from the rating plate. The
rating plate is on the bottom of the hob.
Serial number ...........................
www.zanussi.com
Built-in hobs
Only use the built-in hobs after you assemble
the hob into correct built-in units and work
surfaces that align to the standards.
Connection cable
•
For a single phase or two phase connection
use the following (or higher) mains cable
type: H05BB-F Tmax 90°C.
7
•
To replace the damaged mains cable use
the following (or higher) mains cable type:
H05BB-F Tmax 90°C. Speak to your local
Service Centre.
Assembly
min.
500mm
R 5mm
min.
50mm
min.
55mm
490+1mm 560+1mm
min.
12 mm
min.
28 mm
min.
20 mm
8
www.zanussi.com
Protection box
If you use a protection box (an additional
accessory), the protective floor directly below
the hob is not necessary. The protection box
accessory may not be available in some
countries. Please contact your local supplier.
You can not use the protection box if
you install the hob above an oven.
Technical information
Rating plate
Modell ZEV6940XBV
Typ 58 PEE 15 AO
PNC 949 595 548 00
220 - 240 V 50 - 60 Hz
Made in Germany
6.5 kW
Ser.Nr. .................
ZANUSSI
Cooking zones specification
Cooking zone
Nominal Power (Max heat setting)
[W]
Cooking zone diameter [mm]
Left front
2300
210
Left rear
1200
145
Right front
1200
145
Right rear
1800
180
For optimal cooking results use cookware not
larger than the diameter of the cooking zone.
www.zanussi.com
9
Energy efficiency
Product information according to EU 66/2014
Model identification
ZEV6940XBV
Type of hob
Built-In Hob
Number of cooking zones
4
Heating technology
Radiant Heater
Diameter of circular cooking
zones (Ø)
Left front
Left rear
Right front
Right rear
21.0 cm
14.5 cm
14.5 cm
18.0 cm
Energy consumption per cooking zone (EC electric cooking)
Left front
Left rear
Right front
Right rear
174.3 Wh / kg
181.1 Wh / kg
181.1 Wh / kg
180.3 Wh / kg
Energy consumption of the hob
(EC electric hob)
179.2 Wh / kg
EN 60350-2 - Household electric cooking
appliances - Part 2: Hobs - Methods for
measuring performance
•
Energy saving
•
You can save energy during everyday cooking if
you follow below hints.
•
•
•
•
•
When you heat up water, use only the
amount you need.
If it is possible, always put the lids on the
cookware.
Before you activate the cooking zone put the
cookware on it.
The cookware bottom should have the same
diameter as the cooking zone.
Put the smaller cookware on the smaller
cooking zones.
Put the cookware directly in the centre of the
cooking zone.
Use the residual heat to keep the food warm
or to melt it.
ENVIRONMENT CONCERNS
appliances marked with the symbol with the
household waste. Return the product to your
local recycling facility or contact your municipal
office.
Recycle the materials with the symbol . Put
the packaging in applicable containers to
recycle it. Help protect the environment and
human health and to recycle waste of electrical
and electronic appliances. Do not dispose
10
www.zanussi.com
*
www.zanussi.com
11
867317663-A-422014
www.zanussi.com/shop