Samsung HG32ND460SF 32" Black

450S
460S
470S/477S
LED TV
Installation manual
Thank you for purchasing this Samsung product.
To receive more complete service, please
register your product at
www.samsung.com/register
Model
Serial No.
Figures and illustrations in this User Manual are provided for reference only and may differ from actual product
appearance. Product design and specifications may be changed without notice.
Introduction
This TV B2B (Business to Business) model is designed for hotels or the other hospitality businesses, supports a variety of
special functions, and lets you limit some user (guest) controls.
Operational Modes
This TV has two modes : Interactive and Stand-alone mode.
• Interactive mode : In this mode, the TV communicates with and is fully or partially controlled by a connected Set
Back Box (SBB) or Set Top Box (STB) provided by a hospitality SI (System Integration) vendor. When the TV is initially
plugged in, it sends a command that attempts to identify the SSB or STB connected to it. If the TV identifies the SBB
or STB and the SBB or STB identifies the TV, the TV gives full control to the SBB or STB.
• Stand-alone mode : In this mode, this TV works alone without an external SBB or the STB.
The TV has a Hotel (Hospitality) Menu that lets you easily set its various hospitality functions. Please see pages 20 to 25.
The Menu also lets you activate or de-activate some TV and hospitality functions so you can create your optimal hospitality
configuration.
Still image warning
Avoid displaying still images (such as jpeg picture files) or still image elements (such as TV channel logos, panorama or 4:3
format images, stock or news bars etc) on the screen. Displaying still pictures continually can cause uneven screen wear,
which will affect image quality. To reduce the chance that this effect will occur, please follow the recommendations below:
• Avoid displaying the same TV channel for long periods.
• Always try to display a full screen image.
• Reduce brightness and contrast to help to prevent the occurrence of after-images.
• Frequently use all TV features designed to reduce image retention and screen burn-in. Refer to the proper user
manual section for details.
Ensuring Proper Ventilation
When you install the TV, maintain a distances of at least 4 inches between the TV and other object (walls, cabinet sides, etc.)
to ensure proper ventilation.
Failing to maintain proper ventilation may result in a fire or problems with the product caused by an increase in its internal
temperature.
✎✎ When using a stand or wall-mount, use parts provided by Samsung Electronics only.
✎✎ Using parts provided by another manufacturer may cause difficulties with the product or result in injury caused by the
product falling.
Installation with a stand
Installation with a wall-mount
4 inches
4 inches
4 inches
4 inches
4 inches
4 inches
4 inches
Additional Information
✎✎ The appearance of the TV and its accessories may differ from the illustrations in this manual, depending on the TV.
✎✎ Be careful when the you touch the TV. Some parts can be hot.
Contents
yy Operational Modes....................................................................................................................................... 2
yy Still image warning........................................................................................................................................ 2
yy Ensuring Proper Ventilation........................................................................................................................... 2
yy Additional Information................................................................................................................................... 2
yy Accessories.................................................................................................................................................. 4
yy Installing the LED TV Stand.......................................................................................................................... 5
yy Using the TV's Controller.............................................................................................................................. 6
yy The Connection Panel.................................................................................................................................. 7
yy Using the TV's remote Controller................................................................................................................ 12
yy Connecting the TV to the Lodgenet game controller or a STB of a SI vendor ............................................. 14
yy Connecting the Audio Output to an Audio Amplifier.................................................................................... 16
yy Connecting the RJP (Remote Jack Pack)................................................................................................... 17
yy Setting the Hotel Option Data..................................................................................................................... 19
yy Installing the Wall Mount............................................................................................................................. 45
yy Securing the TV to the Wall......................................................................................................................... 46
yy Anti-theft Kensington Lock......................................................................................................................... 47
yy Specifications............................................................................................................................................. 48
yy Dimensions................................................................................................................................................. 51
English
3
ENGLISH
yy Introduction.................................................................................................................................................. 2
Accessories
✎✎ Please make sure the following items are included with your LED TV. If any items are missing, contact your dealer.
✎✎ The items’ color and shape may vary, depending on the model.
✎✎ The parts for the stand are listed under Stand Components on the following page.
List of Parts
Remote Control & Batteries (AAA x 2)
Data Cable (depending on the model)
(BN39-00865B, BN39-01011E)
4
English
Power Cord
Safety Guide / Quick Setup Guide
(Not available in all locations)
Wall mount Adapter
(Depending on the Model)
Installing the LED TV Stand
Components
When installing the stand, use the provided components and parts.
A
X 4 (M4 X L12)
B
Stand
1
Screws
2
3
(M4 X L12) (2EA)
(M4 X L12) (2EA)
4
English
5
Using the TV's Controller
The TV’s Controller on the bottom right side of the TV, lets you control the TV without the remote control.
: Turns the TV on or off.
Control Menu
/
: Changes channels.
/
: Adjusts the volume.
: Switchs the available video sources.
Remote control sensor/TV Controller
✎✎ If you press it first, the control menu appears. You can select the function by pressing and holding the TV’s controller.
✎✎ The product color and shape may vary depending on the model.
✎✎ With the TV’s Controller, you cannot perform other operations except for turning the TV on or off, changing the channel,
adjusting the volume, and switching the input source.
Standby mode
Your TV enters Standby mode when you turn it off and continues to consume a small amount of electric power. To be safe
and to decrease power consumption, do not leave your TV in standby mode for long periods of time (when you are away on
vacation, for example). It is best to unplug the power cord.
6
English
The Connection Panel
HD450S
3
2
1
AUDIO
OUT
4
HDMI IN
2 (DVI)
HDMI IN
1 (STB)
ANT IN
5
6
English
7
HD460S
AV IN
1
2
7
AUDIO
OUT
EX-LINK
4
3
HDMI IN
5
ANT IN
HD470S / HD477S
8
7
DATA
AV IN
1
AUDIO
OUT
EX-LINK
2
4
8
English
ANT IN
5
HDMI IN1
3
HDMI IN 2
(DVI)
3
HDMI IN 3
(ARC)
✎✎ connect an external device to your TV, make sure that the TV and the device are turned off.
✎✎ When connecting an external device, match the color of the connection terminal to the cable.
1 COMPONENT/AV IN
–– Used to connect with DVD players, Blu-ray players, cable boxes, STB satellite receivers, VCRs.
✎✎ For better picture quality, we recommend the Component connection over the A/V connection.
✎✎ When you connect a Video cable to COMPONENT / AV IN, the color of the COMPONENT / AV IN [VIDEO] jack (green) will
not match the video cable (yellow).
2 AUDIO OUT
–– Connects to the audio input jacks on an Amplifier/Home Theater.
3 HDMI IN
–– Connects to the HDMI jack of a device with an HDMI output.
✎✎ No separate sound connection is needed for an HDMI to HDMI connection. HDMI connections carry both audio and video.
4 USB (5V 0.5A) / CLONING
–– Connector for software upgrades and Media Play, etc.
–– Service connection.
5 ANT IN
–– To view television channels correctly, the TV must receive a signal from one of the following sources:
–– An outdoor antenna / A cable television system / A satellite receiver.
6 DC 19V
7 EX-LINK
–– Connect this jack to the jack on the optional RJP (Remote Jack Pack). The RJP allows you to connect external devices
(Camcoders, PCs, DVD players, etc) easily.
8 DATA
–– Used to support data communication between the TV and the external SBB or STB.
–– Connects using an RJ-12 type of plug.
English
9
Display Modes
You can also select one of the standard resolutions listed in the Resolution column. The TV will automatically adjust to the
resolution you choose.
After connecting a computer to the TV, set the screen resolution for the TV on the computer. The optimal resolution is 1920
x 1080 @ 60 Hz. If it is set to any other than in the table below, the TV may display nothing. Set the resolution properly,
referring to the user guide of the computer or its graphic card.
The resolutions in the table are recommended.
✎✎ Optimal resolution is 1366 X 768 @ 60 Hz.
Display Mode
IBM
MAC
VESA
DMT
10
Display Format
Horizontal Frequency
Vertical Frequency
Pixel Clock
Sync Polarity
(kHz)
(Hz)
(MHz)
(H/V)
-/+
720 x 400
70Hz
31.469
70.087
28.322
640 x 480
67Hz
35.000
66.667
30.240
-/-
832 x 624
75Hz
49.726
74.551
57.284
-/-
640 x 480
60Hz
31.469
59.940
25.175
-/-
640 x 480
72Hz
37.861
72.809
31.500
-/-
640 x 480
75Hz
37.500
75.000
31.500
-/-
800 x 600
60Hz
37.879
60.317
40.000
+/+
800 x 600
72Hz
48.077
72.188
50.000
+/+
800 x 600
75Hz
46.875
75.000
49.500
+/+
1024 x 768
60Hz
48.363
60.004
65.000
-/-
1024 x 768
70Hz
56.476
70.069
75.000
-/-
1024 x 768
75Hz
60.023
75.029
78.750
+/+
1280 x 720
60Hz
45.000
60.000
74.250
+/+
1366 x 768
60Hz
47.712
59.790
85.500
+/+
English
✎✎ Optimal resolution is 1920 X 1080 @ 60 Hz.
Display Mode
IBM
MAC
VESA
DMT
720 x 400
Display Format
70Hz
Horizontal Frequency
Vertical Frequency
Pixel Clock
Sync Polarity
(kHz)
(Hz)
(MHz)
(H/V)
31.469
70.087
28.322
-/+
640 x 480
67Hz
35.000
66.667
30.240
-/-
832 x 624
75Hz
49.726
74.551
57.284
-/-
1152 x 870
75Hz
68.681
75.062
100.000
-/-
640 x 480
60Hz
31.469
59.940
25.175
-/-
640 x 480
72Hz
37.861
72.809
31.500
-/-
640 x 480
75Hz
37.500
75.000
31.500
-/-
800 x 600
60Hz
37.879
60.317
40.000
+/+
800 x 600
72Hz
48.077
72.188
50.000
+/+
+/+
800 x 600
75Hz
46.875
75.000
49.500
1024 x 768
60Hz
48.363
60.004
65.000
-/-
1024 x 768
70Hz
56.476
70.069
75.000
-/-
1024 x 768
75Hz
60.023
75.029
78.750
+/+
1152 x 864
75Hz
67.500
75.000
108.000
+/+
+/+
1280 x 720
60Hz
45.000
60.000
74.250
1280 x 800
60Hz
49.702
59.810
83.500
-/+
1280 x 1024
60Hz
63.981
60.020
108.000
+/+
1280 x 1024
75Hz
79.976
75.025
135.000
+/+
1366 x 768
60Hz
47.712
59.790
85.500
+/+
1440 x 900
60Hz
55.935
59.887
106.500
-/+
1600 x 900RB
60Hz
60.000
60.000
108.000
+/+
1680 x 1050
60Hz
65.290
59.954
146.250
-/+
1920 x 1080
60Hz
67.500
60.000
148.500
+/+
✎✎ When using an HDMI/DVI cable connection, you must use the HDMI IN (DVI) jack.
✎✎ The interlace mode is not supported.
✎✎ The set might operate abnormally if a non-standard video format is selected.
✎✎ Separate and Composite modes are supported. SOG is not supported.
English
11
Using the TV's remote Controller
Turns the TV on and off.
Display and select the available video
sources.
Press to access channels directly.
Press to select additional digital
channels being broadcast by the same
station. For example, to select channel
‘54-3’, press ‘54’, then press '-' and ‘3’.
Return to the previous channel.
Cut off the sound temporarily.
¢
Adjust the volume.
VOL
CH
CH
LIST
Display the channel list on the screen.
Change channels.
HOME: Swich to the HOME Screen.
HOME
Display the main on-screen menu.
CONTENT
View the Contents Home.
Press to display channel and TV
information on the TV screen.
Quickly select frequently used functions.
Select on-screen menu items and
change menu values.
Exit the menu.
Return to the previous menu.
Use these buttons according to the
directions on screen (to perform a
function, display a screen, etc.).
ALARM
SLEEP: Sets the Sleep Timer.
X: Turns the 3D image on or off.
(Not available)
CC: Controls the caption decoder.
12
English
SLEEP
CC
Use these buttons in a specific feature.
Installing the batteries (Battery size: AAA)
Rear of the Remote
✎✎ After you have installed the batteries, use a screwdriver to screw in the screw that holds the battery cover closed.
Installing Batteries into the Remote (battery size: AAA)
Match the polarity of the batteries to the symbol in the batter compartment.
✎✎ NOTE
• Use the remote control within 23~33 feet of the TV.
• Bright light may affect the performance of the remote control. Avoid using near fluorescent lights or neon signs.
• The color and shape of the remote may vary depending on the model.
English
13
Connecting the TV to the Lodgenet game controller or a STB of a SI vendor
HD470S/HD477S
TV Rear Panel
ETH MODEM
Data Cable
1. Connect the DATA jack of the TV to the ETH MODEM jack of the STB (SBB) with the Data cable.
✎✎ The "ETH MODEM" jack name that you connect the Data Cable to may differ depending on the SBB or STB type.
14
English
¦¦ List of SI Vendors and Compatible Data Cables Supplied with the TV
• Confirm you are using the correct data cable for your SI vendor. Refer to the code label on the data cables.
• Contact your nearest dealer or your SI Vendor to buy the data cable not included in the TV.
Note the labeled end.
SI Vendor
Cable code
Confirm the code on the
Code Label
Note the labeled end.
Pin assign
Remark
Samsung
OCC
Enseo
BN39-00865B
Guest-Tek
NXTV
BN39-01011B
nStreams
BN39-01110A
MTI
BN39-01011C
English
15
Connecting the Audio Output to an Audio Amplifier
TV Rear Panel
AUDIO IN
AUDIO OUT
Audio
Amplifier
1S
tereo cable
1. Connect the AUDIO OUT port of the TV to the Audio In port of an audio amplifier with a stereo cable. (Stereo cable not
provide)
16
English
Connecting the RJP (Remote Jack Pack)
Connect the input jacks on the TV to the RJP. The RJP lets guests connect audio and video sources to the TV.
HD460S
RJP Rear
USB
HDMI
S-VIDEO RCA
AUDIO/PC
RS/232
TV Rear Panel
2 Video / Audio Cable
AV IN
AUDIO
OUT
EX-LINK
1 PC Audio cable
3 HDMI Cable
HDMI IN
4
ANT IN
HD470S
RJP Rear
USB
HDMI
S-VIDEO RCA
AUDIO/PC
RS/232
TV Rear Panel
DATA
2 Video / Audio Cable
AV IN
AUDIO
OUT
EX-LINK
1 PC Audio cable
4
HDMI
HDMIIN
IN 1
3 HDMI Cable
HDMI IN 2
(DVI)
HDMI IN 3
(ARC)
ANT IN
1. Connect the AUDIO OUT port of the TV to the PC/AUDIO port of the RJP.
2. Connect the AV IN VIDEO/L-AUDIO-R ports of the TV to the RCA port of the RJP.
3. Connect one of the HDMI IN ports of the TV to the HDMI port of the RJP.
4. Connect the EX-LINK port of the TV to the RS/232 port of the RJP.
✎✎ This Samsung TV is compatible with the Tele Adapt TA-7610 RJP only.
English
17
• RJP (Remote Jack Pack): The RJP is a hardware module that has different Audio Video inputs (A/V, Audio, PC
and HDMI) and corresponding outputs. The corresponding outputs are connected from the RJP to the TV. The RJP
communicates with the TV via RS232. The RJP communicates with the TV by sending messages regarding Active/
Inactive sources.
–– A group of hotel menu items let you assign numbered priorities to the jacks of the RJP. (See page 21). 1 is the highest
priority and 3 is the lowest. When a guest connects external sources to the RJP jacks, the TV will automatically
switch between sources based on the priority you have assigned them in the Menu. For example, lets say AV is set to
1 and HDMI to 2. If a guest has attached a device to the HDMI jack, and then plugs a device into the AV jack, the TV
automatically switches to the device plugged into the AV jack (the jack with the higher priority). Note that a guest can
also switch between devices manually by pushing a button on the RJP.
✎✎ When you set up the RJP, connect the RJP to HDMI 1, 2, or 3 or AV.
• To reset the RJP to its factory default state, press the AV and HDMI buttons simultaneously for 10 seconds. When all
button LEDs blink 5 times, the RJP reset is complete.
• The RJP will automatically turn off any LEDs after 5 minutes to avoid unnecessary light pollution in the hotel room.
The LEDs that were turned off will turn on again if the guest touches any of the buttons and the 5 minute timer will
restart. If the guest then touches another source button, the TV will change to the selected source and the corresponding LED will be lit.
• After an RJP Reset or a TV Power OFF/ON, it takes approximately 10 seconds to establish communications between
the TV and the RJP.
• The following table shows the approximate time in seconds it takes to switch from the TV to an input source, based
on assigned or default priorities.
✎✎ Scenario 1 : When no inputs are connected.
Source
To Connect
AV
PC
HDMI
2 Sec
0.7 Sec
3.9 Sec
✎✎ Scenario 2: When two or more inputs are connected to the RJP and one of the input sources is disconnected and then reconnected.
Source
Disconnect
To Connect
Total
AV
PC
HDMI
4.5 Sec
0.7 Sec
3.9 Sec
2 Sec
0.7 Sec
3.9 Sec
6.5 Sec
1.4 Sec
7.8 Sec
✎✎ An example: If the RJP has all its live sources (AV, PC, and HDMI) connected, AV has been assigned the highest priority, the
RJP is in HDMI mode, and a guest removes and reconnects the AV source, the minimum time required to switch to the AV
source is 6.5 seconds.
• To play audio devices (Ipods, MP3 devices, etc.) through the RJP, you must turn Music Mode AV in the menu on.
(See page 21)
• Music mode in the TA-7610 RJP is supported by the AV jack only. HDMI Music mode is available for the Guestlink
RJP only.
18
English
Setting the Hotel Option Data
To let you control how the TV functions when in Hotel mode, the TV has two Hotel mode menus, the Stand-alone mode
menu and the Interactive mode menu. The menu items that differ between the menus are listed below.
Menu items in the Stand-alone mode only:
–– SI Vendor : OFF / Smoovie / SSCP
–– REACH Server and its submenus.
Menu items in the Interactive mode only:
–– SI Vendor: Samsung and other vendors.
All other items appear in both menus
To access the menus, press MUTE → 1 → 1 → 9 → ENTER E on your Samsung remote.
After a menu appears, follow these general directions to navigate and change values:
–– Use the Up and Down arrow buttons on the Samsung remote to move from menu item to menu item.
–– Press the ENTER or Left or Right arrow buttons to select a menu item. The screen displays that menu item only.
–– Press the Left or Right arrow button to change a value. The Right arrow button increases numerical values. The Left
arrow button decreases numerical values.
–– When the screen is displaying one menu item, you can press the Up or Down arrow button to display the next or
previous menu item.
–– Press the RETURN or MENU button to exit the current menu item and go to a higher menu level or the Main menu.
–– To exit a Hotel mode menu, turn off the TV, and then turn it on again. Any changes you made are saved except
changes to SI Vendor. For changes to SI Vendor, you must turn the TV off, wait until the Standby light glows steadily,
then unplug the TV, wait for the Standby light to go off, and then plug the TV in again.
Hospitality Mode
SI Vendor
Standalone
System
OFF
Power On
Menu OSD
Power On
Music Mode
Channel
External Source
Eco Solution
Menu OSD
Cloning
Clock
Music Mode
HD450S
Remote Jack Pack
External Source
Eco Solution
Logo/Message
Cloning
REACH Solution
Security
DRM
HD460S / HD470S / HD477S
<Depending on model and region, some menu items may not exist.>
To change menus, follow these steps:
1. Highlight the Hospitality Mode menu item in the top left corner of the menu.
2. Press the left or right arrow button on the Samsung remote. Only the Hospitality Mode menu item is displayed.
3. Press the left or right arrow button to change the Hospitality Mode item from Standalone to Interactive or from Interactive
to Standalone.
4. Press the Return or Menu button on the remote. The entire menu re-appears with your selection displayed in the
Hospitality Mode field.
✎✎ After you have set the values in one TV, you can clone those values to multiple TVs. See USB Cloning on page 28.
English
19
¦¦ Menu Items
To Enter this menu: Press the MUTE → 1 → 1 → 9 → ENTER E buttons in order.
To exit from this menu : Power Off (or Power Off and unplug if you have changed SI Vendor), and then turn on again. Any
changes you made are saved.
HD460S / HD470S / HD477S
Menu
Item
initial Value
Description
Select the Hospitality mode.
Hospitality
Hospitality Mode
Mode
Standalone
•Standalone mode: TV works alone, without an SI STB or SBB
•Interactive mode: TV works with an SI STB or SBB
SI Vendor
SI Vendor
OFF
•Interactive mode : Samsung / OCC / MTI / Nstreams / Enseo / Cardinal /
Guestek / Seachange / EBL / MDC / Innvue
•Stand-alone mode : OFF / Smoovie / SSCP
Set the default values that will be applied when the TV is turned on.
Power On Channel
Last Saved
•User Defined : Lets you set Power On Channel and Channel Type manually. See
Power On Channel and Channel Type below.
•Last Saved : If you select this item, when the TV is turned on, it displays the
channel it was displaying when it was turned off.
Power On Channel
Num
…
When the TV is turned on, it switches automatically to this channel.
Power On Channel
Type
…
•Select channel band : AIR (analog air band), DTV (digital air band), CATV (analog
cable band), CDTV (digital cable band)
Power On Volume
Last Saved
Power On Volume
Num
…
Power On
The TV turns on with this Volume Level in Stand Alone Hospitality mode.
Min Volume
0
100
The maximum Volume Level the user in Stand Alone Hospitality mode.
Power On Source
TV
Select the input source the TV displays when turns on.
Last Option
The minimum Volume Level the user can set in Stand Alone Hospitality mode.
Determines the TV's state when power returns after a power failure or after you have
unplugged the TV and then plugged it in again.
•Last Option : Returns to its last Power state. If it was in Stand-by, it returns to
Stand-by. If it was on, it turns on.
•Power On : When the power returns, the TV turns on.
•Standby : When the power returns, the TV enters the Standby mode.
Channel Setup
Gives you direct, immediate access to some of the Channel menu functions on the
user Channel menu such as Auto Program, Antenna selection, etc.
Channel Editor
The Channel Editor lets you edit the channels stored in the TV's memory. Using
Channel Editor you can:
•Change the channel numbers and names, and sort the channels in your desired
channel number order.
•Apply the video mute to channels you select. The video mute blanks out the
video from a channel and outputs only the sound while displaying a speaker icon
on the screen.
The Channel Editor also lets you view information about each channel easily, without
your having to display each channel directly.
Channel
The Channel Bank Editor in conjunction with the SMOOVIE remote lets you control
the channels guests have access to the channels a guest can access depend on
the Bank Card installed in their SMOOVIE remote
Channel Bank Editor
Mixed Channel Map
Dynamic SI
English
•Last Saved : When the TV is turned on, it returns to the volume that had been
set when the power had been turned off.
Max Volume
Power On Option
20
•User Defined : Lets you set the Power On Volume manually. See Power On
Volume below.
OFF
•ON : Display the cable program channels with air program channels on the channel list at the same time.
•OFF : Display the cable program channels or air program channels on the channel list one time. (can`t display them both at the same time)
ON
•ON : Check the DTV Program channel number. (If Dynamic SI is On, it is not
availale to edit DTV channels in Channel Editor.)
•OFF : Does not check the DTV Program channel number. (If Dynamic SI is Off,
it is available to edit DTV channels in Channel Editor, but additional DTV channel
program number update is not supported.)
Menu
Item
initial Value
Picture Menu
Lock
OFF
Menu Display
ON
Tools Display
OFF
Channel Menu Display
OFF
Panel Button
Lock
Unlock
Home Menu Display
ON
Menu OSD
Home Menu Editor
Enable or disable the Picture Menu.
•ON : The Main Menu is displayed.
•OFF : The Main Menu is not displayed.
•ON : The tools quick acess is displayed.
•OFF : The tools quick acess is not displayed.
•ON : The auto program is displayed.
•OFF : The auto program is not displayed.
Turning the front panel (local key) operations on/off.
•Unlock : Unlocks all panel keys.
•Lock : Locks all panel keys.
•OnlyPower : Locks all panel keys except the Power panel key.
•Menu/Source : Locks the Menu and Source panel keys.
OFF : The Home Menu is not displayed.
ON : The Home Menu is displayed.
•Home Menu is displayed.
ON : The Home Menu is Auto Start.
Home Menu Auto
Start
ON
Clock Type
OFF
Local Time
Manual
Timer Type
Wake Up
Time Channel Type
Time Channel Num
…
…
Music Mode AV
OFF
Music Mode Backlight
OFF
Priority AV
1
Priority HDMI
2
If the jack priority is set, the corresponding source is automatically set when a jack is
inserted according to the jack priority.
AV
Select RJP AV Source (Source selection depends on Model).
Clock
Music Mode
Remote
Jack Pack
Description
AV Option
HDMI Option
HDMI Music Mode
OFF : The Home Menu is not Auto Start.
OFF : Close SW Clock.
SW Clock : Open SW Clock. (460S none)
Select the way to update clock data.
Use clock data from a DTV channel to set the clock automatically or set the clock
manually when the TV is in stand-alone mode.
WakeUp : you can set a specific time for the TV to turn on automatically
OnOff : Have you TV turn itself on/off automatically at a specified time. you can set
three Times the most at the same time.
Use clock data from which DTV channel to set the clock
DTV channel Number
Allows music output from an mp3/audio player connected to an AV Input Source on
the TV. When on, you can hear sound from the player through the TV whether there is
a video signal or not. Also mutes the video so the TV does not display a picture when
a guest is playing music. The TV's backlight, however, remains on.
When set to Off, the TV's backlight is turned off entirely when a guest uses the Music
mode. To save energy, set to Off.
If the jack priority is set, the corresponding source is automatically set when a jack is
inserted according to the jack priority.
HDMI 1
Select which HDMI source of the TV is connected to the RJP jack. (HDMI1/HDMI2/
460S: HDMI HDMI3)
OFF
Allows music output from an mp3/audio player connected to an HDMI Input Source.
When on, you can hear sound from the player through an HDMI input of the RJP
whether there is a video signal or not. (This option is only compatible with the Guest
link RJP.)
When a USB device is connected to the TV :
USB Pop-up Screen
Default
•Default : A popup window appears.
•Automatic : Opens the USB contents menu automatically.
•Disable : Neither the popup window nor the menu appears.
External
Source
External Source
Banner
ON
If set to On, the TV displays the External Source Banner (information) when you
change the TV source to another external input, press the Info key, or turn the TV on.
•ON : The External Source information is displayed on the TV screen.
•OFF : The External Source information is not displayed on the TV screen.
Auto Source
OFF
Anynet+Return
Source
Power On Src
•ON : When an external input source is connected to the TV, the TV identifies the
input source, and then automatically switches to that input source.
•OFF : Auto Source function is Off.
Select the return TV source after stopping an Anynet+(HDMI-CEC) connection. (This
fuction is especially useful for the Guestlink RJP.)
English
21
Menu
Item
initial Value
Description
Adjusts the brightness of the TV to reduce power consumption.
•Off: Turns off the energy saving function.
Eco
Solution
Energy Saving
Off
•Low: Sets the TV to low energy saving mode.
•Medium: Sets the TV to medium energy saving mode.
•High: Sets the TV to high energy saving mode.
Welcome Message
OFF
Edit Welcome
Message
Hospitality Logo
Displays a the Welcome Message for 5 seconds when the TV turns On.
Edits the Welcome Message.
OFF
Logo/
Message
Turns the Hospitality logo feature On or Off, If On, when the TV is turned on, the Logo
is displayed, before the signal from the initial source, for the amount of time set in
"Logo Display Time".
Downloads the Hospitality logo.
Hospitality logo file requirements:
Hospitality Logo DL
…
•BMP or AVI files only.
•Max file size : BMP - 960 X 540. AVI - 30MB.
•The file can only be named samsung.bmp or samsung.avi.
Logo Display Time
Cloning
…
Hospitality Logo Display Time (3/5/7 seconds).
Clone TV to USB
Clone the current TV options to a USB memory device.
Clone USB to TV
Clone the saved TV options on a USB memory device to the TV.
If you set Setting Auto Initialize to On, and the TV's power is turned off and on, the
guest side menu items are restored to their cloned values. See page 28.
Setting Auto Intialize
OFF
REACH 3.0
OFF
REACH Channel
…
87:Assign a DTV channel number to carry the update REACH data. This channel
number must be the same as the number set on the Reach server.
Group ID
…
All:Select the group ID of the REACH server. (Refer to the REACH server manual for
more details)
IPG Room Type
…
You can receive up to 3 EPG information headed to the Americas according to
Room Type from SI, and it displays the appropriate channel list and EPG information
according to the value set on TV. For IPG Room Type, there are Default / Public /
Roomtype3 within the hotel Factory Install menu, and its default value is Default.
Ticker
OFF
OFF : Close REACH 3.0
ON : Open REACH 3.0
•ON : The TICKER content is displayed.
•OFF : The TICKER content is not displayed.
REACH
Lets you set when data such as updated SW, cloning files, and S-LYNC REACH
contents is downloaded from the REACH server to the TV :
Solution
•1hour : Every hour
REACH Update Time
…
•2hour : Every 2 hours
•12:00 am : every 12:00 a.m.
•2:00 am : every 2:00 a.m.
•12:00 pm : every 12:00 p.m.
•2:00 pm : every 2:00 p.m.
REACH Update
Immediate
…
Room Number
…
REACH Server
Version
0000
Password Input
Security
22
English
•ON : Whenever the TV enters standby mode (the power cord is plugged in and
the power is off), the REACH data is updated on the TV.
•OFF : The REACH data is only updated on the TV at the REACH server update
time.
Setting Room Number.
0000:Displays the current REACH data version.
Input Password 00000000.
Password Setting
…
Set new Password.
Password Reset
…
Reset Password to 00000000.
Security Mode
…
Security Mode ON or OFF.
USB
…
USB Disable or Enable.
HDMI
…
HDMI Disable or Enable.
Menu
Item
initial Value
Description
Configures CAS support.
OFF : Turns off CAS support.
OFF
DRM Mode
477S:
Pro:Idiom
LYNK DRM : Select to turn on S-LYNK DRM CAS support only.
Pro:idiom : Select to turn on Pro:Idim CAS support only. (only for 477S and above
models)
LYNK DRM,PI : Select to have the TV support S-LYNK DRM CAS and Pro:Idiom
CAS. (only for 477S and above models)
DRM
PI AES Data
0x0000
PI AES Log
OFF
View PI AES Log
…
Displays the current state of Pro:Idiom AES. (only for 477S and above models)
PI AES Log consists of Pro:Idiom AES diagnostic register, here after referred as
AESD, values. These register log will help us diagnose PI key loss issue in the field
and provide solution for it. (only for 477S and above models)
Displays Pro:Idiom AES Log OSD (only for 477S and above models)
Lets you check the state of the TV picture and sound.
•Picture Test : Use to check for picture problems. If the problem appears in the
test picture, select YES, and then follow the directions on the screen.
Self Diagnosis
for TV
System
•Sound Test : Use to check for sound problems. If the problem occurs during the
test, select YES, and then follow the directions on the screen.
Self Diagnosis
for HTV
Lets you check the state of Pro:Idiom and its communication with the SI STB
or SBB. If you have any problems with the Pro:idiom encryption channel or the
communications with the SI STB or SBB, use this diagnosis function. If Pro:Idiom
DTV Channel Key Loss appears to have failed and the Pro:Idim encryption channel
has failed to play content, first check the broadcasting systems related to Pro:Idiom
encryption. If your broadcasting system does not have a problem, contact Samsung
Service. If STB SI Vendor Setting appears to have failed and communication with
the SI STB or SBB has failed, first check your SI STB or SBB. If your SI STB or SBB
does not have a problem, contact to Samsung Service.
SW Upgrade
Lets you upgrade the TV SW with a USB memory stick. See Page 37.
Lets you check the state of the TV picture by displaying picture test patterns. Press
the Menu button to turn off the test patterns and exit.
Service Pattern
OFF
ATV Cable AGC Gain
Default
Lets you control the AGC gain of the analog cable channels. Don't change the
default value unless problems occur.
DTV OpenCable AGC
Gain
Default
Lets you control the AGC gain of the digital cable channels. Don't change the default
value unless problems occur.
Sound Bar Out
OFF
ON : TV speaker sound will be mute. Sound will come out through HDMI. You must
connect the Sound Bar to hear the sound.
OFF : Sound will come out through TV speakers normally. (460S: none)
Contact Samsung
Standby LED
TV reset
Samsung Contact information
ON
ON : The LED light in fuction will be in red light.
OFF : The LED light in fuction will be light off.
Returns all settings on the TV to their factory defaults.
✎✎ REACH (Remote Enhanced Active Control for Hospitality) is a professional, interactive remote controller that lets
you deliver TV firmware updates, cloning data, channel mapping changes, S-LYNK REACH contents, and TICKER
contents through RF DTV to several hundred hospitality TVs simultaneously. The REACH functions are available only
in stand-alone mode. The REACH Server is sold separately. Refer to the REACH server manual enclosed with the
REACH server product for more operating information.
English
23
HD450S
Menu
Item
initial Value
Description
Set the default values that will be applied when the TV is turned on.
Power On Channel
Last Saved
•User Defied : Lets you set Power On Channel and Channel Type manually. See
Power On Channel and Channel Type below.
•Last Saved : If you select this item, when the TV is turned on, it displays the
channel it was displaying when it was turned off.
Power On Channel
Num
…
When the TV is turned on, it switches automatically to this channel.
Power On Channel
Type
…
•Select channel band : AIR (analog air band), DTV (digital air band), CATV (analog
cable band), CDTV (digital cable band)
Power On Volume
Last Saved
Power On Volume
Num
…
Power On
•User Defied : Lets you set the Power On Volume manually. See Power On
Volume below.
• Last Saved : When the TV is turned on, it returns to the volume that had been set when
the power had been turned off.
The TV turns on with this Volume Level in Stand Alone Hospitality mode.
Min Volume
0
Max Volume
100
The maximum Volume Level the user in Stand Alone Hospitality mode.
The minimum Volume Level the user can set in Stand Alone Hospitality mode.
Power On Source
TV
Select the input source the TV displays when turns on.
Determines the TV's state when power returns after a power failure or after you have
unplugged the TV and then plugged it in again.
Power On Option
Last Option
• Last Option : Returns to its last Power state. If it was in Stand-by, it returns to
Stand-by. If it was on, it turns on.
•Power On : When the power returns, the TV turns on.
•Standby : When the power returns, the TV enters the Standby mode.
Picture Menu Lock
OFF
Menu Display
ON
Channel Menu
Display
OFF
Enable or disable the Picture Menu.
•ON : The Main Menu is displayed.
•OFF : The Main Menu is not displayed.
•ON : The auto program is displayed.
•OFF : The auto program is not displayed.
Turning the front panel (local key) operations on/off.
Menu OSD
•Unlock : Unlocks all panel keys.
Panel Button Lock
Unlock
•Lock : Locks all panel keys.
•OnlyPower : Locks all panel keys except the Power panel key.
•Menu/Source : Locks the Menu and Source panel keys.
Home Menu Display
24
English
ON
OFF : The Home Menu is not displayed.
ON : The Home Menu is displayed.
Home Menu Editor
•Home Menu is displayed.
Home Menu Auto
Start
ON : The Home Menu is Auto Start.
ON
OFF : The Home Menu is not Auto Start.
Menu
Music
Mode
External
Source
Item
initial Value
Description
Music Mode AV
OFF
Allows music output from an mp3/audio player connected to an AV Input Source on
the TV. When on, you can hear sound from the player through the TV whether there is
a video signal or not. Also mutes the video so the TV does not display a picture when
a guest is playing music. The TV's backlight, however, remains on.
…
Allows music output from an mp3/audio player connected to an PC Input Source on
the TV. When on, you can hear sound from the player through the TV whether there is
a video signal or not. Also mutes the video so the TV does not display a picture when
a guest is playing music. The TV's backlight, however, remains on.
Music Mode Comp
OFF
Allows music output from an mp3/audio player connected to an component Input
Source on the TV. When on, you can hear sound from the player through the TV
whether there is a video signal or not. Also mutes the video so the TV does not
display a picture when a guest is playing music. The TV's backlight, however, remains
on.
Music Mode
Backlight
OFF
When set to Off, the TV's backlight is turned off entirely when a guest uses the Music
mode. To save energy, set to Off.
Auto Source
OFF
Music Mode PC
•ON : When an external input source is connected to the TV, the TV identifis the
input source, and then automatically switches to that input source.
•OFF : Auto Source function is Off.
Adjusts the brightness of the TV to reduce power consumption.
Eco
Solution
•Off: Turns off the energy saving function.
Energy Saving
OFF
•Low : Sets the TV to low energy saving mode.
•Medium : Sets the TV to medium energy saving mode.
•High : Sets the TV to high energy saving mode.
Cloning
Clone TV to USB
Clone the current TV options to a USB memory device.
Clone USB to TV
Clone the saved TV options on a USB memory device to the TV.
Setting Auto Intialize
OFF
If you set Setting Auto Initialize to On, and the TV's power is turned off and on, the
guest side menu items are restored to their cloned values. See page 28.
English
25
¦¦ Using the Sports(or Soccer) Mode
Sports(or Soccer) Mode t
✎✎ MENU m → Applications → Sports(or Soccer) Mode → ENTER E
This mode provides optimized condition for watching sports games.
• a (Zoom): Pause playback and divide the picture into 9 parts. Select a part to zoom it in. Press this button again to
resume.
✎✎ If you turn the TV off while watching Sports(or Soccer) Mode, the Sports(or Soccer) Mode will be disable.
¦¦ Welcome Message (not available for 450S)
The Welcome Message feature displays a custom message on the TV every time it is turned on.
–– Welcome message settings are in the Hotel Option Menu.
–– Set Welcome Message to ON to display the message when the TV is powered on.
Welcome Message
OFF
Edit Welcome Message
Hospitality Logo
OFF
Hospitality Logo DL
...
Logo Display Time
...
–– You can make the Welcome Message up to 25 characters long and edit it in the Hotel Service menu.
–– Welcome Message supports the following characters:
✎✎ Capital Letters from A to Z.
–– You can edit the Welcome Message by using the remote's navigation, color, and Enter buttons in the “Edit Welcome
Message” OSD (See the illustration below.)
Edit Welcome Message
W
E
R
L
C
H
O
O
M
T
E
E
T
L
O
O
U
_
A BC D E FG
a Move to Left
H IJKLMN
b Move to Right
O PQ R S TU
{ Leave Black
} Done
V WX Y Z
Move Enter
Return
Below are the general directions for navigating and changing letters on the Edit Welcome Message screen:
–– Press the a button on the remote to move to the left in the message.
–– Press the b button to move to the right.
–– After you have selected a position in the message, use the arrow buttons on your remote to select a letter in the
alphabet below the message.
–– Press Enter to place a letter into the position you selected.
–– Press the { button to erase a letter in a position or enter a blank.
–– Press Return or the } button to exit.
26
English
¦¦ Hotel Logo (not available for 450S)
The Hospitality Logo function displays the Hotel's picture image when the TV is powered on.
–– Hospitality Logo settings are the Hotel mode menus.
–– The Logo Download and Logo Display Menu items are enabled when you turn the Hospitality Logo option on.
–– If there is a logo image stored in memory and the Hospitality Logo option is on, the Hospitality logo is displayed when
the TV is turned on.
–– The Hospitality logo is not displayed when the Hospitality found Logo option is off, even if the logo image has been
loaded into the TV.
Hospitality Mode
SI Vendor
Standalone
System
OFF
Power On
Channel
Menu OSD
Clock
Welcome Message
Music Mode
Edit Welcome Message
Remote Jack Pack
External Source
r
Eco Solution
Logo/Message
Hospitality Logo
…
…
OFF
Hospitality Logo DL
…
Logo Display Time
…
Cloning
REACH Solution
Security
DRM
<Depending on model and region, some menu items may not exist.>
yy Hospitality Logo
–– This option lets you choose whether the Hospitality Logo image is displayed or not.
–– Initial value is OFF.
–– Can be set to OFF or ON.
–– When set to ON, the Logo Download and Logo Time Display menu items become accessible.
yy Hospitality Logo DL
–– This option lets you download the logo image to the TV’s memory from a USB device.
–– A wait message appears while the image is being copied to the TV.
–– A "completed" message appears when the copy operation finishes successfully.
–– The word "failed" appears if the copy operation was unsuccessful.
–– No USB appears if no USB device is connected.
–– No File appears if there is no file to copy on the USB device or the file is in the wrong format (must be a BMP or AVI
file). If No File appears and there is a logo file on the USB device, check the file format.
yy Logo File Format
–– The TV supports only BMP and AVI format.
–– The file name must be samsung.bmp or samsung.avi.
–– The maximum resolution of the BMP format is 960 x 540.
–– The maximum file size for AVI format is 30MB.
–– The TV does not change the size or scale of the image.
English
27
¦¦ USB Cloning
The USB Cloning function lets you download user-configured settings (Picture, Sound, Input, Channel, Setup, and Hotel
Setup) from one TV to a USB device, and then upload these settings from the USB device to other TV sets. This lets you
create a standard array of settings and distribute that standard array to all the TVs in your facility.
• Cloning from TV to USB: Copies stored menu settings from a TV to a USB device.
1. Insert a USB drive into the USB port on the rear or side of the TV
2. Enter the hotel option menu by pressing these buttons in order. MUTE
→ 1 → 1 → 9 → ENTER E
USB
(5V 0.5A)
/ CLONING
3. Press the u or d button to select Clone TV to USB, and then press
the ENTER button.
4. The message Clone TV to USB is displayed. Press the ENTER E
button.
5. The TV displays one of the following messages:
• In Progress: Copying data to USB.
• Completed: Copy operation was successful.
• Failed: Copy operation was not successful.
• No USB: USB is not connected.
The clone folder will be labeled T-NT14LJAKUCB. (T-N14LJIBRCH)
✎✎ The cloned values include the values on the Guest side menu (brightness,
picture size, contrast, etc.) and the Hotel side menu.
Clone TV to USB
Clone USB to TV
Setting Auto Initialize
OFF
• Cloning from USB to TV: Copies menu settings from a USB device to a TV.
✎✎ Shortcut: Turn the TV off, insert the USB device, turn the TV on, and then press the ENTER E button for 5 seconds.
To clone data to the TV using the Hotel menu, follow these steps:
1. Turn the TV off.
2. Insert the USB drive into the USB port on the rear or side of the TV.
3. Turn the TV on.
Clone TV to USB
Clone USB to TV
Setting Auto Initialize
OFF
4. Enter the Interactive menu by pressing these buttons in order.
MUTE → 1 → 1 → 9 → ENTER E
5. Press the u or d button to select “Clone USB to TV”, and then press
the ENTER E button.
6. The message Clone USB to TV is displayed. Press the ENTER E
button.
7. The TV displays one of the following messages:
• In Progress: Copying data to TV.
• Completed: Copy operation was successful.
• Failed: Copy operation was not successful.
• No USB: USB is not connected
• No File: There is no file to copy on the USB device. If you get a No File message, check the folder on your
USB device. The folder name should be T-NT14LJAKUCB. (T-N14LJIBRCH)
✎✎ Tables that list the settings that are cloned in the Interactive and Standalone Hotel Menus begin on the next
page.
28
English
• Settings Cloned in the Hotel Menu
Menu Item
Cloning Support
Hospitality Mode
Yes
SI Vendor
Yes
Power On Channel
Yes
Power On Channel Num
Yes
Power On Channel Type
Yes
Power On Volume
Yes
Power On Volume Num
Yes
Min Volume
Yes
Max Volume
Yes
Power On Source
Yes
Power On Option
Yes
Channel Setup
No
Channel Editor
No
Mixed Channel Map
No
Dynamic SI
No
Picture Menu Lock
Yes
Menu Display
Yes
Tools Display
Yes
Channel Menu Display
Yes
Panel Button Lock
Yes
Home Menu Display
Yes
Home Menu Editor
Yes
Home Menu Auto Start
Yes
Clock Type
Yes
Local Time
Yes
Timer Type
Yes
Time Channel Type
Yes
Time Channel Num
Yes
Music Mode AV
Yes
Music Mode Backlight
Yes
Priority AV
Yes
Priority HDMI
Yes
AV Option
Yes
HDMI Option
Yes
HDMI Music Mode
Yes
USB Pop-up Screen
Yes
External Source Banner
Yes
Auto source
Yes
Anynet+Return Source
Yes
Energy saving
Yes
Welcome Message
Yes
English
29
Menu Item
Cloning Support
Edit Welcome Message
Yes
Hospitality Logo
No
Hospitality Logo DL
Yes
Logo Display Time
Yes
Clone TV to USB
Yes
Clone USB to TV
Yes
Setting Auto Intialize
Yes
REACH 3.0
Yes
REACH Channel
Yes
Group ID
No
IPG Room Type
No
Ticker
Yes
REACH Update Time
Yes
REACH Update Immediate
Yes
Room Number
Yes
REACH Server Version
Yes
Password Input
Yes
Password Setting
No
Password Reset
Yes
Security Mode
Yes
USB
Yes
HDMI
Yes
DRM Mode
No
PI AES Data
No
PI AES Log
Yes
View PI AES Log
No
Self Diagnosis for TV
No
Self Diagnosis for HTV
No
SW Upgrade
No
Service Pattern
Yes
ATV Cable AGC Gain
Yes
DTV OpenCable AGC Gain
Yes
Sound Bar Out
Yes
Contact Samsung
No
Standby LED
Yes
TV reset
No
30
English
¦¦ Multi Code Remocon
A Multi Code Remocon is a special remote which is designed to control multiple TVs.
This function is useful where there is more than one TV in a location.
You can control up to 10 TVs with a different ID code of each remote with no conflicts between the TVs. ID numbers are
displayed on each TV's OSD.
The Initial ID code for each TV is “0”.
–– You can set and reset the ID code in Analog TV mode or PC mode. (Not available in DTV mode.)
–– You can set the ID code to any digit from 0 to 9.
–– To set a TV's ID code, follow these steps:
1. Aim the remote at the TV, and then press the MUTE button and the RETURN button simultaneously for more than
7 seconds. When you stop pressing the buttons, the TV displays the current ID in the middle of the screen and
the words, "Remote control code is set to x. If you want to change the Remote control code, enter the digit you
want to change."
2. Press the number on the remote you want to assign to the TV. The TV displays the following words:
"Remote control code is changed to x."
✎✎ The TV will display the OSD until you press the Exit button.
See the example below.
Remote control code is set to 0. If you want to change
Remote control code, enter the digit you want to
change.
Example: After you see the message above, if you press 1, the TV and Remote will be set to ID code 1. The TV then
displays the following message: “Remote control code is changed to 1”The TV can then only be controlled by a
remote which has the same ID code (1).
–– To reset the ID code, press the MUTE button and the EXIT button simultaneously for more than 7 seconds. When
you stop pressing the buttons, the ID codes of the TV and Remote are reset to “0”. “Remote control code is set to 0.”
appears on the TV.
English
31
¦¦ Setting Auto Initialize
When you clone settings from one TV to another, you clone both the guest side menu and hotel side menu settings: Picture,
Sound, Input, Channel, Setup, and Hotel Setup. This lets you set nearly all of the menu values on your hospitality TVs to
the same, standard settings. If you allow guests access to the guest side menus, for example the Picture menu, they can
change the settings in those menus so they are no longer standard. If you set the Setting Auto Initialize function to on the TV
automatically restores (initializes) any guest-side menu values to the cloned, standard values when the TV is turned off and
then turned on again. Note that Setting Auto Initialize works on cloned guest side menu values only. Settings which have not
been cloned are ignored.
The table below lists the settings that are restored to their cloned values when you set the Setting Auto Initialize function to
on.
Menu
Menu Item
Menu
Sound Mode
Backlight
Sound Effect
Contrast
Brightness
Sharpness
Color
Tint (G/R)
Sound Menu
TV Installation Type
Position
PIP
Advanced Settings
Dynamic Contrast
Black Tone
Reset Sound
Menu Language
Time
Clock
Sleep Timer
Wake-up Timer
Eco Solution
Energy Saving
Flesh Tone
RGB Only Mode
Color Space
HDMI Black Level
Film Mode
Picture Off
Reset Picture
Speaker Settings
Auto Volume
Picture Size
White Balance
Gamma
Motion Lighting
Picture Option
Color Tone
Digital Clean View
MPEG Noise Filter
DTS TruSurround
DTS TruDialog
Equalizer
Speaker Select
Picture Size
Picture Menu
Menu Item
Picture Mode
System Menu
Eco Sensor (only for 40" and above models)
No Signal Power Off
Auto Power Off
Auto Protection Time
Change PIN
General
Game Mode
Boot Logo
Anynet+ (HDMI-CEC)
Anynet+ (HDMI-CEC)
Auto Turn Off
DivX® Video On Demand
32
English
¦¦ Hotel Plug & Play
The Hotel Plug & Play function, which automatically performs the Hotel mode selection, Country Setup, Clock Setup, and
Picture mode Setup, runs once when power is first turned ON. Setup also runs automatically after you have executed a
Service Reset.
HD450S
Factory Reset
Type
32S6AH0JJ
Local Set
BRA_DTV(or ARG_DTV)
SW Model
HD450
BOM Model
(Press power off+1+8+2+power on to enter)
If you select Factory Reset,the TV resets all values to their factory defaults and then
displays the Hospital Plug & Play menu below when powered on again.
450
Tuner
S_TC
Ch Table
NONE
MRT Option
Engineer Option
wP
Local Set
Local Set
If you select
Change
Change
LocatSet
Setif ifLocated
Locatedinin North
North America,
Europe.
Change
Locat
America,Latin
LatinAmerica
Americaand
and
Europe.
otherregions,
regions,Please
Pleasepress
press SKIP button
step.
In In
other
buttonmove
movetotothe
thenext
next
step.
Warning! TV might not function if local set is not correctly configured.
When Local set is changed, TV will turn off automatically to apply it.
Change
Change
Countries List
None
Skip
Skip
If you select Skip
The TV is automatically
turned off and on.
If you don’t change the country of the Current Location
Easy Set up
c
appears for 3 seconds
If you select this, Easy
setup will be started.
There are Essential
Details, Channel Scan,
Clock and Terms in Easy
setup.
Standalone Setup
(Continue Setup)
Standalone Only
If you change the country of
the Current Location
BRA_DTV(or ARG_DTV)
Current
Localset : US ARG_DTV)
Current Localset
: BRA_DTV(or
If you select
Standalone Only
Standalone mode has been set.
TV will enter the RF mode.
OK
(End Setup)
If you select
Standalone Setup
Configure your TV
Select your Language
age
Select your language to start the on screen setup.
Select your information in all of the categories
below.
English
c
Picture Mode
Español
Português
Standard
Choose a picture mode
that best suits your
viewing enviroment.
Auto Program
To get channels, set the options below then select
Scan.
Antenna
Both
Select current connected
antenna.
Press the arrow buttons
to move around the
screen.
Press the Enter button to
select.
Scan
The Language Setting will be applied to Main Menu and not Plug and Play.
Select your language
Select Picture mode
Auto Program
TV Setup Complete!
Power On
Menu OSD
Auto Program is
Air
Your TV is now ready to use.
Music Mode
Select the channel
band to use for Auto
Program
channels for you...
13
4%
DTV Air
Air
Cable
External Source
Eco Solution
0
0
0
Cloning
Stop
OK
After Searching
channels.
Hospitality Option Menu
appears,press Power
OFF to exit
Clock
You can adjust your time to set DST, Time Zone and
clock mode
Clock Mode
Auto
Date
-- / -- / ----
Time
-- : -- --
Time Zone
Auto Program
Set current date and time
Auto Program is incomplete.
0 channels are memorized.
DTV Air
Air
Cable
0
0
0
South and Southeast
-- : -- --
Change Settings
Scan Again
Select Clock Mode and your Time Zone
English
33
HD460S / HD470S / HD477S
Self Diagnosis for TV
Self Diagnosis for HTV
SW Update
Service Pattern
OFF
ATV cable AGC Gain
Default
DTV OpenCable AGC Gain
Default
Sound Bar Out
If you select TV Reset, the TV resets all values to their factory defaults
and then displays the Hospital Plug & Play menu. Go to the first
Hospital Plug & Play screen below.
OFF
Contact Samsung
Standby LED
ON
TV Reset
w
P
Local Set
Local Set
If you select
Change
Change
LocatSet
Setif ifLocated
Locatedinin North
North America,
Europe.
Change
Locat
America,Latin
LatinAmerica
Americaand
and
Europe.
otherregions,
regions,Please
Pleasepress
press SKIP button
step.
In In
other
buttonmove
movetotothe
thenext
next
step.
Warning! TV might not function if Local Set is not correctly configured.
When Local set is changed, TV will turn off automatically to apply it.
Current Localset
Localset :: US
Current
US
Change
Change
If you change the country of
the Current Location
US
Countries List
USA
Skip
Skip
The TV is automatically
turned off and on.
If you select Skip
If you don’t change the country of the Current Location
Easy Set up
c
Intertactive (460S none)
(Hotel Menu)
If you select this, the
setup process will be
completed and go to
hotel menu
If you select
Standalone Only
Standalone Setup
TV will enter the RF mode.
(Continue Setup)
Standalone Only
(End Setup)
If you select
Standalone Setup
appears.
Select your information in all of the categories
below.
English
Picture Mode
Español
Français
Press Power OFF to exit.
Hospitality Option Menu
Configure your TV
Select your Language
age
Select your language to start the on screen setup.
c
Interactive
If you select
Interactive
Standard
Choose a picture mode
that best suits your
viewing enviroment.
Press the ▲▼◄►
buttons to move the
highlight.
Press the enter button
to select.
Auto Program
To get channels, set the options below then select
Scan.
Select current connected
antenna.
Antenna
Both
Digital Cable System
STD
Analog Cable System
STD
Scan
The Language Setting will be applied to Main Menu and not Plug and Play.
Select your language
Select Picture mode
Auto Program
TV Setup Complete!
Standalone
Auto Program is
Air
Your TV is now ready to use.
Hospitality Option Menu
Select the channel
band to use for Auto
Program
channels for you...
21
6%
DTV Air
Air
DTV Cable
Cable
appears.
0
0
0
0
Stop
OK
After Searching
channels.
Press Power OFF to exit.
Clock
Auto Program
You can adjust your time to set DST, Time Zone and
clock mode.
Clock Mode
Auto
Date
-- / -- / ----
Time
-- : -- --
DST
Time Zone
Set current date and time
DTV Air
Air
DTV Cable
Cable
Off
Eastern
-- : -- --
Select Clock Mode, DST, and your Time Zone
34
English
Auto Program is incomplete.
0 channels are memorized
0
0
0
0
Change Settings
Scan Again
HD450S
yy Local Set OSD
–– Initially highlighted: BRA_DTV(or ARG_DTV)
–– If you press the Enter key after selecting Change, you can change the country.If the country is changed, the TV
automatically turns off and on.
–– If you select the incorrect country,execute Factory Reset again after entering the Factory menu.
–– If you don`t want to change the country,select skip.
yy Easy Set Up OSD
–– Initially highlighted: Standalone Setup
–– If you select the Standalone Only button, Standalone hospital mode is set by default and the “Standalone mode has
been set” OSD appears for 3 seconds.
–– TV enters into RF mode automatically after displaying the “Standalone mode has been set” OSD for 3seconds.
–– If you select Standalone Setup mode, the “Select your Language” OSD appears.
yy Select your Language OSD
–– Initially highlighted: Português(or Español)
–– Display time: OSD time out and operation are the same as Samsung’s consumer TV models.
–– If you press the Enter key, the “Configure your TV” OSD appears.
yy Confiure your TV OSD
–– Initially highlighted: Standard.
–– The TV displays the Picture Mode OSD where you can choose Dynamic or Standard Picture mode.
yy Auto Program Mode OSD
–– If you press the Enter key, the TV automatically searches for channels.
yy Set Clock Mode and Time Zone OSD
–– Initially highlighted: Clock Mode : Auto, Time Zone :South and Southeast
–– If the TV will be tuned to digital broadcast channels, and these channels transmit date and time information, set the
Clock Mode to Auto. The TV will set the date and time automatically.
–– If the TV will not be tuned to digital broadcast channels,set the Clock Mode to Manual, and then set the date and
time on the TV manually.
–– Select your time zone on the map appears.
English
35
HD460S / HD470S / HD477S
yy Local Set
–– Initially highlighted: US
–– If you press the Enter key after selecting Change, you can change the country.
–– If the country is changed, the TV automatically turns off and on.
–– If you select the incorrect country, execute TV Reset again after entering the Service section of the Hospital Menu.
yy Easy Set Up OSD
–– Initially highlighted: Interactive
–– If you select the Standalone Only button,Standalone hospital mode is set by default and the“Standalone mode has
been set” OSD appears for 3 seconds.
–– TV enters into RF mode automatically after displaying the “Standalone mode has been set” OSD for 3 seconds.
–– If you select Interactive mode, the Interactive Setup Menu is displayed. Press the power off key to exit the Interactive
menu.
–– If you select Standalone setup mode, the “Select your Language” OSD appears.
yy Select Menu Language OSD
–– If you select Standalone setup from the “Select Hospital TV Mode” OSD, the “Select Menu Language” OSD appears.
–– Initially highlighted: English
–– Display time: OSD time out and operation are the same as Samsung’s consumer TV models.
–– If you press the Enter key, the “Picture Mode” OSD appears.
yy Configure your TV OSD
–– Initially highlighted: Standard
–– The TV displays the Picture Mode OSD where you can choose Dynamic or Standard Picture mode.
yy Auto Program OSD
–– If you press the Enter key, the TV automatically searches for channels.
–– After the automatically searches for channels complete,press the next button to continue.
yy Set Clock Mode, DST(Daylight saving time), andTimeZone OSD
–– Initially highlighted: Clock Mode : Auto, DST : Off, TimeZone : Eastern
–– If the TV will be tuned to digital broadcast channels,and these channels transmit date and time information,set the
Clock Mode to Auto. The TV will set the date and time automatically.
–– If the TV will not be tuned to digital broadcast channels,set the Clock Mode to Manual, and then set the date and
time on the TV manually.
–– Set DST On or Off to apply or not apply daylight saving time to the TV.
–– Select your time zone on the map appears.
36
English
¦¦ USB Software Upgrade Method
Samsung may offer upgrades to the TV’s SW in the future. Please contact the Samsung Hospitality Hot line at the last page
to receive information about downloading upgrades and using a USB drive to update the SW by connecting the USB drive
containing the upgrade to the USB port located on the TV.
When the software is upgraded, video and audio settings you have made will return to their default (factory) settings. We
recommend you clone the hotel settings so that you can easily reset them after the upgrade.
To upgrade the TV's software, follow these steps:
1. Insert a USB drive containing the SW upgrade into the USB port on the side of the
TV.
2. Press the MENU button to display the menu.
Press the u or d button to select Support, and then press the ENTER E button.
USB
(5V 0.5A)
/ CLONING
3. Press the u or d button to select SW Upgrade, and then press the ENTER E
button. The message "Scanning for USB. This may take more than 1min." is
displayed.
4. The message "Upgrade version XXXX to version XXXX? The system will be reset
after upgrade." is displayed.
Press the l or r to select the OK, and then press the ENTER E button.
Please be careful to not disconnect the power or remove the USB drive while upgrades are being applied. The TV will
turn off and turn on automatically after completing the SW upgrade. Please check the SW version after the upgrades are
complete.
English
37
¦¦ Sound Bar (not available for HD450S/460S model)
yy Samsung Sound-Bars and Hospitality TVs in 2015
–– Samsung Sound-Bars and hospitality TVs support the ARC feature in HDMI 1.4. If you connect a compatible
Samsung Sound-Bar to a compatible Samsung hospitality TV using a single HDMI cable, guests can listen to the
TV's sound through the Sound-Bar.
–– The item of Sound bar Out in Hospitality Option Menu makes you control to where the TV sound is outputted when
the TV is turned on.
–– If Sound bar Out is On, the TV sound is automatically outputted in the Sound Bar device only whenever TV is turned
on.
–– If Sound bar Out is Off, the TV sound is automatically outputted in the TV speaker only whenever TV is turned on.
–– Models supporting the ARC function are listed below:
• Sound-Bars: HW-E350/E450/E550
HW-F350/F355/FM35/F450/FM45/FM45C/F550/F551/FM55/FM55C/F750/F751
yy Setting the Sound-Bars to Hotel Mode
1. Set the following Hotel menu options:
–– Hotel option > External Device > Sound Bar Out = On.
–– Hotel option > Power On > Power On Volume = User Defined.
–– Hotel option > Power On > Power On Volume Num > Set greater than 0.
–– Hotel option > Power On > Max Volume > Set greater than 0.
2. Connect an HDMI cable from the HDMI OUT jack on the back of the Sound-Bar to the HDMI3 port (supporting ARC)
on the hospitality TV.
3. After the Sound-Bar is connected to the hospitality TV, when the TV turns on, the Sound-Bar automatically detects
the TV, and then automatically switches to Hotel Mode.
Sound Bar Hotel mode functional characteristics:
• Power On/Off is synchronized with the TV
• HDMI_CEC defaults set to On
• Functions through the “HDMI OUT” port only
• Disables the "Input mode" key on the VFD to prevent unexpected audio-source changes.
• Acquires adjustable Power On and Max Volume settings from the TV’s Hotel option menu. The Sound-Bar's
Power On Volume and Max Volume values, however, are ½ of the Power On Volume and Max Volume settings
in the TV's Hotel option menu. Example: If the TV's Power On Volume=20 and Max Volume=90, then the
Sound Bar's Power On Volume=10 and Max Volume=45.
38
English
¦¦ Channel Bank Editor (Smoovie TV Only)
The Channel Bank Editor in conjunction with the SMOOVIE remote lets you control the channels guests have access to.
The Channel Bank Editor provides three Banks of channels and lets you select which channels will be available from each
bank. SMOOVIE remotes have instalable Bank Cards which correspond to the channel banks in the Channel Bank Editor.
The remotes only allow access to channels in the channel bank that correspond to the installed card. Consequently, the
channels a guest can access depend on the Bank Card installed in their SMOOVIE remote.
Setting the Channel Bank Editor under Stand-alone Mode
1. Press MUTE + 1 + 1 + 9 + ENTER E on the remote to enter the Hotel Standalone menu.
2. Go to SI vendor, and then select : “Smoovie”
3. Find the new menu option, “Channel”.
4. Enter the “Channel Bank Editor”.
Hospitality Mode
Standalone
SI Vendor
OFF
d
SI Vendor
Smoovie
d
Channel
d
Channel Bank Editor
5. Edit the Channel Bank. An example is below.
a. Bank1 (Free channel): Select the channels that will be accessible when a remote doesn’t have a card.
b. Bank2 (Family Card - Green): Select the channels that will be accessible when a remote has a GREEN CARD.
c. Bank3 (Adult Card - Red): Select the channels that will be accessible when a remote has a RED CARD.
English
39
Information About SMOOVIE Remote Controls
Channel Bank Editor
Registered
3
----- (Air)
4
----- (Air)
6
----- (Air)
9-1
----- (Air)
11
----- (Air)
13
----- (Air)
14
----- (Air)
15
----- (Air)
28
----- (Air)
63-1
Bank1 (0)
Bank2 (0)
Bank3 (0)
SY5000
Select All Items On Column
Deselect All Items On Column
Select
Return
• If you select SMOOVIE as the SI vendor, you should also use SMOOVIE remotes in your facility.
• Guests with remotes that do not have a card can only view channels from Bank 1.
• Guests using the Numeric keys on the remote to change channels can only view channels from Bank 1.
• Guests with remotes that have Green or Red cards must use the channel up/down keys to change channels.
• Guests can only see channels from the Bank1 channel list In the Channel Guide or the Channel List.
Smoovie Set Up Sequence
Smoovie TV Setup (Air/ Cable )
Step
Only Air or Cable used
If the TV starts with Hotel Plug&Play
If Hotel Plug&Play already done
1
Do a complete P&P (including Air or Cable auto tune)
Enter the Hotel menu
2
After P&P, the TV displays the Hotel menu
Select the channel type
- ATV or ADTV for Air
- CATV or CDTV for cable
3
Select the channel type
- ATV or ADTV for Air
- CATV or CDTV for cable
Select Smoovie TV in the Hotel menu
4
Select Smoovie TV in the Hotel menu
Select Channel Setup
5
Select Channel Setup (Can be skipped)
Select "Air" or "Cable" to auto tune
6
Select "Air" or "Cable" to auto tune. (Can be skipped,)
Set up channels in the CH Bank Editor
7
Set up channels in the CH Bank Editor
After power off & on, guests can use the TV
8
After power off & on, guests can use the TV
9
10
40
Only Air or Cable used
English
¦¦ Channel Editor (not availiable for 450S model)
The Channel Editor lets you edit the channels stored in the TV's memory. Using Channel Editor you can:
–– Change the channel numbers and names, and sort the channels in your desired channel number order.
–– Apply the video mute to channels you select. The video mute blanks out the video from a channel and outputs only the
sound while displaying a speaker icon on the screen.
–– The Channel Editor also lets you view information about each channel easily, without your having to display each channel
directly.
Hospitality Mode
SI Vendor
Standalone
System
OFF
Power On
Channel
Menu OSD
Clock
Music Mode
Remote Jack Pack
External Source
r
Channel Editor
Eco Solution
Logo/Message
Cloning
REACH Solution
Security
DRM
<Depending on model and region, some menu items may not exist.>
General Steps for Using the Channel Editor in Stand-alone Mode
Step
Broad Outline
1
2
3
4
5
Run ‘Channel’ in the Hotel Option Menu.
Enter ‘Channel Editor’ in the Hotel Option Menu.
On a piece of paper, compile a list of channels you want to have, arranged in the order you want.
Rearrange channels and edit channel names with the TOOLS Button based on the list you compiled.
Press the EXIT or RETURN Button to exit.
<For a detailed explanation of how Channel Editor works, see pages 39 through 44.>
English
41
The picture below shows a sample Channel Editor screen.
20-2
22
----- (Air)
27
----- (Air)
30
----- (Air)
50-1
CH 50.1
50-2
CH 50.2
50-3
CH 50.3
50-4
CH 50.4
51-1
KUSI-HD
72
----- (Cable)
73
----- (Cable)
81
----- (Cable)
HDMI1
HDMI2/DVI
HDMI3
AV
• a Indicates an analog channel.
• Channels without an a are digital channels.
✎✎ If Dynamic SI in the Hospitality Option Menu is On, Channel Editor will display no digital channels. You must set Dynamic SI to
Off before you can edit digital channels in Channel Editor.
• The guide at the bottom of the Channel Editor menu displays the remote buttons you need to press to apply Channel
Editor functions.
1 Using the remote's up or down arrow key, highlight the channel that you want to edit.
–– To edit more than one channel, move the highlight to a channel, and then press the ENTER E key. A check will
appear in the check box next to the channel. Repeat for each channel you want to edit.
2 To delete the channel or channels you selected from the channel list, press the red button on the remote.
–– To delete two or more channels simultaneously, select multiple channels in Step 1, and then press the red button
on the remote.
✎✎ If you want to delete the scambled channels,you should run the process below Hotel option > Channel >
Channel Setup > Channel Settings > Clear Scrambled Channel.
3 Press the green button on the remote to select all channels.
4 To apply the video mute, press the yellow button on the remote.
–– To apply the video mute to two or more channels simultaneously, select multiple channels in Step 1, and then
press the yellow button on the remote.
5 To view information about a channel, press the INFO button on the remote.
6 Press the TOOLS button on the remote to rename a channel or change the channel number.
Channel Editor Functions and Remote Button
a Red (Delete): Deletes a channel from the channel list.
b Green (Select All): Selects all channels at once.
{ Yellow (Video Mute On/Off): You can set the Video Mute On/Off.
U (Page): Moves to next or previous page.
` (Information): Display details of the selected channel.
T (Tools): Displays the option menu.
R (Return): Returns to the previous step or exits.
42
English
When you press the TOOLS button, the following menu is available
20-2
27
----- (Air)
50-1
CH 50.1
50-3
CH 50.3
51-1
KUSI-HD
73
----- (Cable)
HDMI1
HDMI3
• Edit Channel Number
Edit Channel Number
Use Edit Channel Number to change the channel number of a channel you select.
To change a channel number, follow these steps:
4
1. Select a channel on the Channel Edit screen.
Cancel
2. Press the TOOLS button on your remote.
E Space
Adjust Number
Edit U
Channel
3. Select Edit Channel Number in the Tools menu.
4. Use the up or down arrow keys to change the channel number.
5. Select OK when done, and then press the ENTER E button.
✎✎ When you change the channel number, the channel information is not updated automatically.
• Rename Channel
Use Rename Channel to change the name of a channel you select.
To change the name of a channel, follow these steps:
1. Select a channel on the Channel Edit screen.
2. Press the TOOLS button on your remote.
3. Select Rename Channel in the Tools menu.
4. Use the on-screen keyboard that appears to enter the new name for the channel.
Use the arrow buttons on your remote to select a letter or number, and then
press Enter. Repeat for each letter or number you want to select.
Ok
ABC HD_
R Return
Ok
Rename Channel
4
ABC HD_
Enter new name for CH 4 (Max Length = 24)
Cancel
ABC HD_
a
b
c
d
U Adjust
e
E Space
f
1
2
R Return
3
g
h
i
j
k
l
4
5
6
m
n
o
Rename
p
qChannel
r
7
8
9
Enter
s newtname ufor CH v4 (MaxwLengthx= 24)
y
z
0
ABCA/a
HD_
Space
◄
►
a
b
c
Done
d
e
1
2
3
g
h
i
j
a Delete
k
{ Space
4
5
R Return
6
m
n
o
p
q
r
7
8
9
s
t
u
v
w
x
y
z
0
◄
►
A/a

Cancel
f
l
Space

Done
Cancel
a Delete
{ Space
R Return
5. When finished, select Done on the bottom of the screen, and then press the
ENTER E button.
• Information
Use Information to view information about a channel you select.
To view information about a channel, follow these steps:
1. Select a channel on the Channel Edit screen.
2. Press the TOOLS button on your remote.
3. Select Information in the Tools menu.
4. Select OK, and then press the ENTER E button to close the Information screen.
English
43
The external sources of this TV are displayed in the last page of the Channel Editor menu as shown in the example below.
In the example, there are four external sources connected to the TV, HDMI1, HDMI2(DVI), HDMI3 and AV.
–– You can assign a new analog channel to an external source by selecting the source on the last page, pressing the
TOOLS button, selecting Edit Channel Number, and then using the up or down arrow button on the remote to select
the channel number of the analog channel.
–– If you tune to a channel after assigning the channel to an external source, you can enter the external source without
opening the TV source menu.
20-2
22
----- (Air)
27
----- (Air)
30
----- (Air)
50-1
CH 50.1
50-2
CH 50.2
50-3
CH 50.3
50-4
CH 50.4
51-1
KUSI-HD
72
----- (Cable)
81
73
----- (Cable)
----- (Cable)
HDMI1
HDMI2/DVI
HDMI3
AV
After assigning channel number
999 to HDMI1 source.
20-1
20-2
22
----- (Air)
30
----- (Air)
50-1
CH 50.1
50-2
CH 50.2
50-3
CH 50.3
50-4
CH 50.4
51-1
KUSI-HD
72
----- (Cable)
73
----- (Cable)
81
----- (Cable)
999
HDMI1
HDMI3
44
English
27
----- (Air)
AV
Installing the Wall Mount
[
Wall or Ceiling Mounting
If you mount this product on a wall, it should be mounted only as recommended by the manufacturer. Unless it is correctly
mounted, the product may slide or fall, causing serious injury to a child or adult, and serious damage to the product.
Preparing before installing Wall-Mount
Before installing any other wall mounting kit,assemble the
wall mount adapter provided separately with the TV.
✎✎ The product shape may differ depending on the
model.
Wall mount Adapter
( Depending on the Model )
Installing the Wall Mount Kit
The wall mount kit (sold separately) lets you mount the TV on the wall. For detailed information about installing the wall
mount, see the instructions provided with the wall mount. Contact a technician for assistance when installing the wall mount
bracket. Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to
install the wall mount on your own.
To order the wall mount, contact Samsung Customer Care at 1-800-SAMSUNG (1-800-726-7864).
Wall Mount Kit Specifications (VESA)
✎✎ The wall mount kit is not supplied, but sold separately.
Install your wall mount on a solid wall perpendicular to the floor. When attaching to building materials other than plaster
board, please contact your nearest dealer. If you install the wall mount on a ceiling or slanted wall, TV may fall and cause
severe personal injury.
✎✎ NOTE
• Standard dimensions for wall mount kits are shown in the table below.
• Samsung wall mount kits contain a detailed installation manual. All parts necessary for assembly are provided.
• Do not use screws that do not comply with the VESA standard screw specifications.
• Do not use screws that are longer than the standard dimension or do not comply with the VESA standard screw
specifications. Screws that are too long may cause damage to the inside of the TV set.
• For wall mounts that do not comply with the VESA standard screw specifications, the length of the screws may differ
depending on the wall mount specifications.
• Do not fasten the screws too firmly. This may damage the product or cause the product to fall, leading to personal
injury. Samsung is not liable for these kinds of accidents.
• Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used or
the consumer fails to follow the product installation instructions.
• Do not mount the TV at more than a 15 degree tilt.
• Always have two people mount the TV onto a wall.
Product
Family
TV size in
inches
VESA screw hole specs
(A * B) in millimeters
Standard Screw
(Length* Pitch in mm)
Quantity
LED-TV
32
200 X 200
M8
4
Do not install your Wall Mount Kit while your TV is turned on. It may result in personal injury due to electric
shock.
English
45
Securing the TV to the Wall
[
Caution
Pulling, pushing, or climbing onto the TV may cause the TV to fall. In particular, ensure that your children
do not hang over or destabilize the TV; doing so may cause the TV to tip over, resulting in serious injuries
or death. Follow all safety precautions provided on the included Safety Flyer. For added stability, install
the anti-fall device for safety purposes, as follows.
To Avoid the TV from Falling
1. Put the screws into the clamps and firmly fasten them onto the wall.
Confirm that the screws have been firmly installed onto the wall.
✎✎ You may need additional material such as an anchor depending on the type
of wall.
✎✎ Since the necessary clamps, screws, and string are not supplied, please
purchase these additionally.
2. Remove the screws from the back center of the TV, put the screws into
the clamps, and then fasten the screws onto the TV again.
✎✎ Screws may not be supplied with the product. In this case, please purchase
the screws.
3. Connect the clamps fixed onto the TV and the clamps fixed onto the wall
with a strong string and then tie the string tightly.
✎✎ NOTE
• Install the TV near to the wall so that it does not fall backwards.
• It is safe to connect the string so that the clamps fixed on the
wall are equal to or lower than the clamps fixed on the TV.
• Untie the string before moving the TV.
4. Verify all connections are properly secured. Periodically check
connections for any sign of fatigue for failure. If you have any doubt about
the security of your connections, contact a professional installer.
Wall
46
English
Anti-theft Kensington Lock
The Kensington Lock is a device you can use to physically fix a TV
to a location when you use it in a public place. The appearance and
locking method may differ from the illustration at right, depending on the
manufacturer. Refer to the manual provided with the Kensington Lock for
additional information on proper use.
1
The Kensington Lock is not supplied by Samsung.
✎✎ Please find a “K” icon on the rear of the TV. A Kensington slot is
beside the “K” icon.
<Optional>
To lock the product, follow these steps:
1. Wrap the Kensington lock cable around a large, stationary object such as desk or chair.
2. Slide the end of the cable with the lock attached through the looped end of the Kensington lock cable.
3. Insert the locking device into the Kensington slot on the product 1.
4. Lock the lock.
✎✎ These are general instructions. For exact instructions, see the User manual supplied with the locking device.
✎✎ The locking device has to be purchased separately.
✎✎ The location of the Kensington slot may be different depending on the TV model.
English
47
Specifications
Environmental Considerations
Operating Temperature
50°F to 104°F (10°C to 40°C)
Operating Humidity
10% to 80%, non-condensing
Storage Temperature
-4°F to 113°F (-20°C to 45°C)
5% to 95%, non-condensing
Storage Humidity
Model Name
HG32ND450S
HG32ND460S
Display Resolution
1366 x 768
Screen Size
32” Class
(31.5” measured diagonally)
(Diagonal)
Sound (Output)
5W x 2
Dimensions (WxDxH)
Body
745.4 x 69.0 x 442.2 mm
745.4 x 69.0 x 442.2 mm
With stand
745.4 x 150.5 x 466.6 mm
745.4 x 150.5 x 466.6 mm
Without Stand
3.73 kg
3.97 kg
With Stand
3.82 kg
Weight
Model Name
4.06 kg
HG32ND470S / HG32ND477S
Display Resolution
1366 x 768
Screen Size
(Diagonal)
32” Class
(31.5” measured diagonally)
Sound (Output)
5W x 2
Dimensions (WxDxH)
Body
745.4 x 69.0 x 442.2 mm
With stand
745.4 x 150.5 x 466.6 mm
Weight
Without Stand
3.97 kg
With Stand
4.06 kg
✎✎ Design and specifications are subject to change without prior notice.
✎✎ This device is a Class B digital apparatus.
48
English
Supported Video Formats
File Extention
Container
Video Codec
DivX 3.11/4.x/5.x/6.x
*.avi / *.mkv
*.asf / *.wmv
*.mp4 / *.3gp
*.vro / *.mpg
*.mpeg / *.ts
*.tp / *.trp
*.mov / *.flv
*.vob / *.svi
*.divx
AVI
MKV
ASF
MP4
3GP
MOV
FLV
VRO
VOB
PS
TS
*.webm
WebM
MPEG4 SP/ASP
Resolution
Frame rate(fps)
Bit rate(Mbps)
1920 x 1080
30
640 x 480
8
H.264 BP/MP/HP
Motion JPEG
Window Media Video v9
MPEG2
MPEG1
6~30
30
1920 x 1080
VP8
20
Audio Codec
Dolby Digital
LPCM
ADPCM
(IMA, MS)
AAC
HE-AAC
WMA
Dolby Digital Plus
MPEG (MP3)
DTS (Core)
G.711(A-Law,
μ-Law)
Vorbis
✎✎ Other Restrictions
• Video content will not play, or not play correctly, if there is an error in the content or the container.
• Sound or video may not work if the contents have a standard bit rate/frame rate above the compatible Frame/sec listed
in the table.
• If the Index Table is in error, the Seek (Jump) function is not supported.
• Some USB/digital camera devices may not be compatible with the player.
• The menu can be displayed late if the video is over 10Mbps(bit rate).
Video decoder
• Supports up to H.264, Level 4.1 (FMO/ASO/RS are not supported.)
• frame rate :
−− Below 1280 x 720: 60 frame max
−− Above 1280 x 720: 30 frame max
• VC1 AP L4 is not supported.
• GMC is not supported.
Audio decoder
•
•
•
•
WMA 10 Pro supports up to 5.1 channel and M2 profile.
WMA lossless audio is not supported.
Vorbis supports up to 2ch.
Dolby Digital Plus supports up to 5.1 channel.
English
49
Supported Subtitle Formats
• Internal
• External
Name
File extension
Name
Container
ormat
MPEG-4 timed text
.ttxt
Xsub
AVI
Picture Format
SAMI
.smi
SubStation Alpha
MKV
Text Format
SubRip
.srt
SubViewer
.sub
Advanced SubStation
Alpha
MKV
Text Format
Micro DVD
.sub or .txt
SubRip
MKV
Text Format
MPEG-4 timed text
MP4
Text Format
SubStation Alpha
.ssa
Advanced SubStation Alpha
.ass
Powerdivx
.psb
Supported Music Formats
Supported Photo Formats
File Extension
Type
Resolution
*.jpg
*.jpeg
JPEG
15360 X 8640
*.bmp
BMP
4096 X 4096
*.mpo
MPO
15360 X 8640
File Extension
Type
*.mp3
MPEG
*.m4a
*.mpa
*.aac
*.flac
*.ogg
*.wma
*.wav
*.mid
*.midi
50
English
Codec
MPEG1 Audio
Layer 3
MPEG4
AAC
FLAC
OGG
FLAC
Vorbis
WMA
WMA
wav
wav
midi
midi
Remark
Can support up to 2channel
Can support up to 2channel
WMA 10 Pro supports up to
5.1 channel and M2 profile.
(WMA lossless audio is not
supported.)
Can not support seeking
Dimensions
yy Front view / Side view
HG32ND450S
7
8
1
2
3
4 5 6
9
(unit: mm)
HG32ND450S
1
745.4
2
699.7
3
394.3
4
433.9
5
442.2
6
466.6
7
37.3
8
69.0
9
150.5
HG32ND460S
7
8
1
2
3
4 5 6
9
(unit: mm)
HG32ND460S
1
745.4
2
699.7
3
394.3
4
433.9
5
442.2
6
466.6
7
37.3
8
69.0
9
150.5
English
51
HG32ND470S / HG32ND477S
7
8
1
2
3
4 5 6
9
(unit: mm)
HG32ND470S
HG32ND477S
52
English
1
2
3
4
5
6
7
8
9
745.4
699.7
394.3
433.9
442.2
466.6
37.3
69.0
150.5
yy Rear view
HD450S
1
5
4
2
6
3
(unit: mm)
HG32ND450S
1
2
3
4
5
6
162.6
133.3
163.0
461.2
200.0
200.0
HD460S / HD470S / HD477S
1
5
4
2
6
3
(unit: mm)
1
2
3
4
5
6
144.6
133.3
163.0
459.5
200.0
200.0
HG32ND460S
HG32ND470S
HG32ND477S
English
53
yy Stand base view
150.54
150.19
51.85
54
English
150.54
150.19
51.85
✎✎ NOTE: All drawings are not necessarily to scale. Some dimensions are subject to change without prior notice. Refer
to the dimensions prior to performing installation of your TV. Not responsible for typographical or printed errors.
© 2015 Samsung Electronics America, Inc
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate collection systems)
This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger,
headset, USB cable) should not be disposed of with other household waste at the end of their working life. To prevent possible
harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste
and recycle them responsibly to promote the sustainable reuse of material resources. Household users should contact either the
retailer where they purchased this product, or their local government office, for details of where and how they can take these items
for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase
contract. This product and its electronic accessories should not be mixed with other commercial wastes for disposal.
Correct disposal of batteries in this product
(Applicable in the European Union and other European countries with separate battery return systems.)
This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with other
household waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery
contains mercury, cadmium or lead above the reference levels in EC Directive 2006/66. If batteries are not properly disposed of,
these substances can cause harm to human health or the environment. To protect natural resources and to promote material
reuse, please separate batteries from other types of waste and recycle them through your local, free battery return system.
¦¦ Important Warranty Information Regarding Television Format Viewing
✎✎ See the warranty card for more information on warranty terms.
Wide screen format LED Displays (with aspect ratios of 16:9, the ratio of the screen width to height) are primarily designed to display wide
screen format full-motion video. The images displayed on them should primarily be in the wide screen, 16:9 ratio format, or expanded to fill
the screen if your model offers this feature, and the images are constantly moving. Displaying stationary graphics and images on screen, such
as the dark sidebars on nonexpanded standard format television video and programming, should be limited to no more than 5% of the total
television viewing per week.
Additionally, viewing other stationary images and text such as stock market crashs, video game displays, station logos, web sites or computer
graphics and patterns, should be limited as described above for all televisions. Displaying stationary images that exceed the above guidelines
can cause uneven aging of LED displays that leave subtle, but permanent burned-in ghost images in the LED picture. To avoid this, vary the
programming and images, and primarily display full screen moving images, not stationary patterns or dark bars. On LED models that offer
picture sizing features, use these controls to view different formats as a full screen picture.
Be careful in the selection and duration of television formats used for viewing. Uneven LED aging as a result of format selection and use, as
well as burned-in images, are not covered by your Samsung limited warranty.
• SAMSUNG ELECTRONICS NORTH AMERICAN LIMITED WARRANTY STATEMENT
Subject to the requirements, conditions, exclusions and limitations of the original Limited Warranty supplied with Samsung Electronics
(SAMSUNG) products, and the requirements, conditions, exclusions and limitations contained herein, SAMSUNG will additionally provide
Warranty Repair Service in the United States on SAMSUNG products purchased in Canada, and in Canada on SAMSUNG products
purchased in the United States, for the warranty period originally specified, and to the Original Purchaser only.
The above described warranty repairs must be performed by a SAMSUNG Authorized Service Center. Along with this Statement, the
Original Limited Warranty Statement and a dated Bill of Sale as Proof of Purchase must be presented to the Service Center. Transportation
to and from the Service Center is the responsibility of the purchaser. Conditions covered are limited only to manufacturing defects in
material or workmanship, and only those encountered in normal use of the product.
Excluded, but not limited to, are any originally specified provisions for, in-home or on-site services, minimum or maximum repair times,
exchanges or replacements, accessories, options, upgrades, or consumables.
For the location of a SAMSUNG Authorized Service Center, please call toll-free:
–– In the United States : 1-866-894-0524
–– In Canada : 1-800-213-8513
Disconnecting Device Instructions
Worded: "To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the mains plug shall be
readily operable" or equivalent.
Outdoor Use Marking - UL
Worded: "WARNING - To Prevent damage which may result in fire or elctric shock hazard, do not expose this appliance to rain or moisture" or
equivalent.
Wet Location Marking - c-UL
Worded: "Apparatus shall not be exposed to dripping or splashing" and "Do not place a vessel containing water on this apparatus as this can
result in a risk of fire or electric shock" or equivalent.
English
55
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.
Country
Customer Care Center
Web Site
CANADA
1-800-SAMSUNG (726-7864)
www.samsung.com/us/support
MEXICO
1-800-SAMSUNG (726-7864)
www.samsung.com/us/support
U.S.A
1-866-894-0524
www.samsung.com/us/support
BRAZIL
0800-124-421 or 4004-0000
www.samsung.com/br/support
ARGENTINE
0800-555-SAMSUNG (0800-555-7267)
www.samsung.com/ar/support
HD450S-460S-470S-477S-NA-ENG-00