Washer dryer
WD14H421GB
siemens-home.com/welcome
HQ
,QVWUXFWLRQ0DQXDODQG,QVWDOODWLRQ,QVWUXFWLRQV
ens-home.com/welcome
Register
your
product
online
Your new washer dryer
Note/tip
You have chosen a Siemens washer
dryer.
Information about the optimum use of
the appliance/any other useful
information.
Please take a few minutes to read and
become familiar with the advantages of
your washer dryer.
To meet the high quality demands
required by Siemens, every washer dryer
that leaves our factory is carefully
checked to ensure that it functions
correctly and is in perfect condition.
For more information on our products,
accessories, replacement parts and
services, see our website www.siemenshome.com or contact our after-sales
service centres.
If the operating and installation
instructions describe different models,
any differences will be pointed out at the
relevant points in the text.
Read these operating and installation
instructions before switching on the
washer dryer.
Display rules
: Warning!
This combination of symbol and signal
word indicates a possibly dangerous
situation. Not heeding the warning can
cause death or injuries.
Caution!
This signal word indicates a possibly
dangerous situation. Not heeding the
caution can cause property and/or
environmental damage.
2
1. 2. 3. / a) b) c)
The steps are represented by numbers
or letters.
■
/-
Lists are represented by a small box or
a dash.
en
Contents
enI structionManual ndInstal tionI structions
8 Intended use. . . . . . . . . . . . . . . . .4
( Safety instructions . . . . . . . . . . .5
Electrical safety. . . . . . . . . . . . . . . . . . 5
Risk of injury . . . . . . . . . . . . . . . . . . . . 5
Safety for children. . . . . . . . . . . . . . . . 5
7 Protection of the environment . .6
Packaging/old appliance . . . . . . . . . . 6
Hints and tips . . . . . . . . . . . . . . . . . . . 6
Y The main points in brief . . . . . . .7
* Getting to know your
appliance
Washer dryer .
Control panel .
Display panel .
. . . . . . . . . . . . . . . . . . .8
..................8
..................9
. . . . . . . . . . . . . . . . . 10
Z
Laundry. . . . . . . . . . . . . . . . . . . .12
Preparing laundry for washing . . . . . 12
Preparing laundry for drying . . . . . . . 13
1
Operating the appliance . . . . . .14
Preparing the washer dryer. . . . . . . . 14
Selecting the programme/
Switching on the appliance. . . . . . . . 14
Adjusting the washing programme . . 14
Adjusting the drying programme . . . 15
Loading the laundry . . . . . . . . . . . . . 15
Dosing and adding detergent and
care product . . . . . . . . . . . . . . . . . . . 16
Starting the programme . . . . . . . . . . 17
Childproof lock . . . . . . . . . . . . . . . . . 17
Reloading the laundry. . . . . . . . . . . . 18
Changing the programme. . . . . . . . . 18
Interrupting or ending the
programme . . . . . . . . . . . . . . . . . . . . 18
End of the programme . . . . . . . . . . . 18
After washing/drying. . . . . . . . . . . . . 19
/
Overview of programmes . . . . . 20
Programme on the programme
selector . . . . . . . . . . . . . . . . . . . . . . .20
Drying table . . . . . . . . . . . . . . . . . . . .23
Starching . . . . . . . . . . . . . . . . . . . . . .24
Dyeing/Bleaching . . . . . . . . . . . . . . .24
Soaking . . . . . . . . . . . . . . . . . . . . . . .24
0 Changing programme
default settings . . . . . . . . . . . . . 24
Temp. . . . . . . . . . . . . . . . . . . . . . . . .24
Spin rpm . . . . . . . . . . . . . . . . . . . . . .24
Dry. . . . . . . . . . . . . . . . . . . . . . . . . . .24
Finish in . . . . . . . . . . . . . . . . . . . . . . .25
\ Selecting additional
functions . . . . . . . . . . . . . . . . . . 26
( (speedPerfect) . . . . . . . . . . . . . . .26
¦ (EcoPerfect) . . . . . . . . . . . . . . . . .26
z (Water Plus) . . . . . . . . . . . . . . . . .26
l (Rinse plus) . . . . . . . . . . . . . . . . .26
æ (Less iron) . . . . . . . . . . . . . . . . . .26
s (Prewash) . . . . . . . . . . . . . . . . . . .26
M Setting the signal . . . . . . . . . . . 27
2 Cleaning and maintenance. . . . 28
Machine housing/Control panel . .
Drum . . . . . . . . . . . . . . . . . . . . . . .
Descaling . . . . . . . . . . . . . . . . . . .
Cleaning the detergent dispenser .
Drain pump blocked . . . . . . . . . . .
Drainage hose on the siphon
blocked . . . . . . . . . . . . . . . . . . . . .
Filter in the water inlet hose
blocked . . . . . . . . . . . . . . . . . . . . .
Air filter blocked . . . . . . . . . . . . . .
.
.
.
.
.
.28
.28
.28
.28
.28
. .29
. .29
. .30
3 Faults and what to do
about them . . . . . . . . . . . . . . . . . 30
Emergency release, e.g. if a power
failure occurs. . . . . . . . . . . . . . . . . . .30
Information on the display panel . . . .31
Faults and what to do about them. . .32
3
en
Intended use
4 Customer service . . . . . . . . . . . 35
J Technical specifications . . . . . 35
[ Consumption values . . . . . . . . 36
5 Installation and connection . . . 37
Standard accessories . . . . . . . . . .
Installation . . . . . . . . . . . . . . . . . . .
Secure installation . . . . . . . . . . . . .
Installation area . . . . . . . . . . . . . . .
Installing the appliance on a base
or on a wooden joist ceiling. . . . . .
Installing the appliance under/
between kitchen units . . . . . . . . . .
Removing the transportation
protection devices . . . . . . . . . . . . .
Hose and cable lengths. . . . . . . . .
Connecting the water. . . . . . . . . . .
Water supply . . . . . . . . . . . . . . . . .
Water drainage . . . . . . . . . . . . . . .
Drainage into a wash basin . . . . . .
Drainage into a siphon . . . . . . . . .
Drainage into a plastic pipe with
rubber sleeve or into a gully . . . . .
Alignment . . . . . . . . . . . . . . . . . . .
Electrical connection . . . . . . . . . . .
Before washing/drying for
the first time . . . . . . . . . . . . . . . . . .
Transportation . . . . . . . . . . . . . . . .
.
.
.
.
37
37
37
38
. 38
8 Intended use
■
esudntI
■
■
■
. 38
.
.
.
.
.
.
.
39
39
40
40
41
41
41
■
. 41
. 42
. 42
. 43
. 43
■
■
■
For private domestic use only.
The washer dryer is suitable for
machine washable textiles and hand
washable wool and for drying certain
types of textiles according to care
instructions.
The appliance is suitable for
operation with cold mains water and
commercially available detergents
and care products which are suitable
for use in a washer dryer.
Always follow the manufacturer's
instructions when dosing
all detergents, cleaning aids,
cleaning products and cleaning
agents.
The washer dryer may be used by
children over the age of 8 years and
by persons with reduced physical,
sensory or mental capacity or by
persons with a lack of experience or
knowledge if they are supervised or
have been instructed by a
responsible person.
Children must not carry out any
cleaning or maintenance work
without supervision.
Keep children under the age of 3
years away from the washer dryer.
Keep pets away from the washer
dryer.
Install and operate the washer dryer
in a room which has an outflow.
Before operating the appliance:
Read the installation and operating
instructions and all other information
enclosed with the washer dryer, and use
the machine accordingly.
Retain documents for subsequent use.
4
Safety instructions
( Safety instructions
Electrical safety
snoitcursniyteSfa
: Warning
Risk of scalding!
■
: Warning
Danger of death!
Danger of death if live parts are
touched.
■
When disconnecting the mains
plug, always pull the plug itself
and not the cable, otherwise the
cable could be damaged.
■
Never touch or hold the mains
plug with wet hands.
Risk of injury
: Warning
Risk of injury!
■
■
■
■
If the washer dryer is lifted
using projecting parts (e.g. the
washer dryer door), these
components may break off and
cause injuries.
Do not lift the washer dryer by
its projecting parts.
If you climb onto the washer
dryer, the worktop may break
and cause injuries.
Do not climb onto the washer
dryer.
If you lean/support yourself on
the open door, the washer dryer
may overturn and cause
injuries.
Do not lean on the open
washer dryer door.
If you reach into the rotating
drum, you may injure your
hands.
Do not reach into the rotating
drum. Wait until the drum stops
rotating.
en
■
When washing at high
temperatures, you may be
scalded if you touch the hot
washing water (e.g. if draining
hot washing water into a
washbasin).
Do not touch the hot washing
water.
If a drying programme was
interrupted, the washer dryer
and laundry may be very hot.
Select Intensive Dry or Gentle
Dry and select 15 min drying
time to cool down the washing
and then remove.
Safety for children
: Warning
Danger of death!
If children play on the washer
dryer, they may place themselves
in life-threatening situations or
injure themselves.
■
Do not leave children
unsupervised near the washer
dryer.
■
Do not let children play with the
washer dryer.
: Warning
Danger of death!
Children may lock themselves
inside appliances and suffocate.
On redundant appliances:
■
Pull out the mains plug.
■
Sever the power cord and
discard together with the plug.
■
Destroy the lock on the door of
the washer dryer.
5
en
Protection of the environment
: Warning
Risk of choking!
When playing, children may
become entangled in the
packaging/film and packaging
parts or pull them over their heads
and suffocate.
Keep packaging, plastic film and
packaging parts out of the reach
of children.
: Warning
Risk of poisoning!
Detergents and care products may
be poisonous if consumed.
Keep detergents and care
products out of the reach of
children.
: Warning
7 Protection of the
environment
Packaging/old appliance
mnoterivht fonitceoPr
)
Dispose of packaging in an
environmentally friendly manner.
This appliance has been identified in
accordance with the European Directive
2012/19/EU on Waste Electrical and
Electronic Equipment (WEEE). The
Directive specifies the framework for an
EU-wide valid return and recycling of
waste appliances.
Hints and tips
■
Eye / skin irritation!
Detergents and care products may
cause irritation if they come into
contact with the eyes or skin.
Keep detergents and care
products out of the reach of
children.
■
■
: Warning
Risk of injury!
When washing at high
temperatures, the glass part of the
door becomes hot.
Prevent children from touching the
hot door.
■
■
■
6
Utilise the maximum amount of
washing for the particular
programme.
Overview of programmes
~ Page 20
Wash normally soiled laundry without
prewash.
Energy saving mode: The display
panel light goes out after several
minutes, Start/Reload flashes. To
reactivate the display, select any
button.
The energy-saving mode is not
activated if a programme is running.
The selectable temperatures apply to
the care labels on the textiles. The
temperatures in the machine may
deviate from this so that you get the
optimum mix of energy-saving and
washing results.
If the laundry is then dried in
the appliance, select the maximal
possible spin speed. The less water
the laundry contains, the less time
and energy are required for drying.
Do not dry dripping wet laundry.
Ventilate the installation room well
and clean the air inlet filter regularly.
Cleaning and maintenance
~ Page 28
and installation and connection
~ Page 37
The main points in brief
en
Y The main points in
brief
feirbnstiopnmaeTh
1
@
Plug into the mains.
Turn the tap on.
@
Open the washer
dryer door.
--------
2
@
Select the washing/
drying programme
@
If required, change the programme default
settings and/or select additional functions.
--------
3
@
Max. load in display
panel.
@
Sort the laundry.
@
Load the laundry.
@
FODFN
Open the detergent
drawer.
--------
4
@
End of the
programme.
Close the washer
dryer door.
Dose detergent
according to the
dosing
recommendation.
~ Page 16
@
Set programme
selecter to $ Off.
Select Start/Reload.
@
Open the door and
remove the laundry.
Turn off the water
tap. (for models
without Aqua-Stop)
--------
7
en
Getting to know your appliance
* Getting to know your
appliance
Washer dryer
ecnailpruoywnktgniGte
#
6
7
FODFN
(
0
8
8
Hot air outlet
Operating/display panel
Door with handle
9S Open the door
9T Close the door
@
Service flap and cool air inlet
Getting to know your appliance
en
Control panel
Change the default settings for the selected
programme and select additional functions:
( Select a programme. Can be rotated in either
direction. To switch off the washer dryer, set
the programme selector to $ Off.
0 Select buttons Temp. (Temperature), Spin
rpm (Spin speed), Finish in and Dry for
changing default settings. ~ Page 24
+ #
8 Select buttons Option and Select for
additional functions. ~ Page 26
@ Start programme. Select the Start/Reload
button to start, interrupt (e.g. reload laundry)
and cancel the programme. ~ Page 18
H Display panel for settings and information:
9
en
Getting to know your appliance
Display panel
Displays for the programme
#
+
(: Temperature for washing
programme
Ž (cold) – 90°
Temperature in °C
0: Spin speed for washing
programme
$ –1400
Spin speed in revolutions per minute;
$ (Rinse stop = without final drain/spin
cycle, laundry remains in the water after the
last rinse cycle)
See details ~ Page 26
8: Additional functions
s
Prewash
x
Washing
q
Rinsing
0
Draining/Spinning
Ù
Drying
| lights up
Water pressure too low. This extends the
programme duration
| flashes
The tap has not been turned on or there is
no water pressure
Overdosage
o
On if too much foam detected, one rinse
cycle switched on
Door
« lights up
When the door can be opened
« flashes
When the programme has started: The door
is not closed properly
w lights up
On if childproof lock has been activated
~ Page 17
@: Programme progress and
information symbols
Tap
Childproof lock
10
Getting to know your appliance
Drying
en
w flashes
The childproof lock is actived, and if the programme selector has been adjusted or the
buttons have been pressed
è
On if drying programme is selected
1:50*
Programme duration after programme
selection in h:min (hours:minutes)
1 – 24 h
Finish in time in h (h=hour)
7.0 kg*
Max. load for selected programmes
- 0-
Programme end
PAUS
Programme interrupted
––––
End of programme by Rinse stop
OPEn
The door can be opened if programme is
interrupted
A:02
The door cannot be opened
E : - -*
Fault display
0*
Setting the signal ~ Page 27
H: Programme information
Time:
Programme status:
Door open information:
Further information:
Additional rinse cycles
Drying mode and the drying time:
Aut 1
Auto-Dry mode 1, Cupboard dry
Aut 2
Auto-Dry mode 2, Extra dry
120*
Selected drying time
OFF
The drying function is deactivated
* Depends on selected programmes/additional functions.
11
en
Laundry
O
Z Laundry
Preparing laundry for washing
W
Sorting laundry according to:
Ž
yrdnuaL
Sort your laundry according to the care
instructions and specifications of the
manufacturer on the care labels:
■
Type of fabric/fibre
■
Colour
Note: Laundry can discolour or not
be cleaned correctly. Wash white
and coloured items separately.
Wash new bright fabrics separately
the first time you wash them.
■
Soiling
– light
Do not prewash; if necessary
select the ( (speedPerfect)
additional function.
– normal
Select programme with prewash.
If required, pretreat stains.
– heavy
Load less washing. Select
programme with prewash. If
required, pretreat stains.
– Stains: Remove/pretreat stains
while they are fresh. Firstly, dab
with a soap water; do not rub.
Then select the appropriate
programme and wash the items.
Stubborn or dried-in stains can
sometimes only be removed by
washing several times.
■
Symbols on the care labels
Note: The numbers in the symbols
indicate the maximum washing
temperature that may be used.
M Suitable for normal washing
process;
e.g. Cottons programme
N A gentle washing process is
required;
e.g. Easy-Care programme
12
An especially gentle washing
process is required; e.g.
Delicates/Silk programme
Suitable for washing by hand;
e.g. W Wool program
Do not machine wash.
Protecting your laundry and washer
dryer:
Caution!
Damage to the appliance/textiles
Foreign objects (e.g. coins, paper clips,
needles, nails) may damage the
washing or components of the washer
dryer.
The following instructions must be
observed when preparing your laundry:
■
Always follow the manufacturer's
instructions when dosing
all detergents, cleaning aids, care
products and cleaning agents.
■
Do not exceed maximum load.
Overfilling will impair the washing
result.
■
Keep detergents and agents for the
pretreatment of laundry (e.g. stain
remover, prewash sprays, etc.) away
from the surfaces of the washer
dryer. Using a damp cloth,
immediately remove any fine spray
residue and other residue or
droplets.
■
Empty any pockets. Remove any
foreign objects.
■
Remove metal parts (paper clips,
etc.).
Laundry
■
■
■
■
■
■
Trousers, knitwear and knitted
textiles, e.g. jersey garments, T-shirts
or sweatshirts, should be turned
inside out.
Ensure that underwired bras are
machine-washable.
Wash delicates in a net or bag
(tights, underwired bras, etc).
Close zips, button up covers.
Brush sand out of pockets and
collars.
Remove curtain fittings or include in
the net/bag.
Preparing laundry for drying
■
■
■
■
en
Before drying, spin at the optimum
speed. A spin speed of more than
1000 rpm is recommended for
cotton, more than 800 rpm for easycare textiles.
Do not iron washing immediately
after drying. It is recommended to
roll the washing up first to distribute
residual moisture evenly.
To ensure a good drying
performance, quilts, terry cloths and
other large textiles should be dried
separately. Do not dry more than
four terry cloths (or 3 kg).
Do not exceed maximum load.
Note: To ensure an even drying result,
sort the laundry according to the:
■
Type of fabric
■
Drying programme
■
Care symbols which are indicated on
the care labels.
Only dry laundry which is labelled
“dryer-proof” or which has the following
care symbols:
■
a = Dry at normal temperature
Intensive Dry
■
` = Dry at low temperature
Gentle Dry
The following textiles must not be dried:
■
b = care symbol “Do not dry”
■
Wool or textiles containing wool.
■
Delicates (silk, synthetic curtains).
■
Textiles which contain foam rubber
or similar materials.
■
Textiles which were treated with
flammable liquids, e.g. with stain
remover, petroleum ether, thinners.
Risk of explosion!
■
Textiles which still contain hairspray
or similar substances.
Notes
Before drying, hand-washed textiles
must be spun at the appropriate spin
speed.
■
13
en
Operating the appliance
1 Operating the
appliance
Preparing the washer dryer
ecnailpehtgniaOrep
The washer dryer was tested before
delivery. To remove residual water from
the test procedure, the first wash cycle
should be run without laundry using the
Fluff clean programme.
Before washing/drying for the first time
~ Page 43
Selecting the programme/
Switching on the appliance
Note:
If you have activated the childproof lock,
you must deactivate it before you can
set a programme.
■
Select the required programme with
the programme selector. Can be
rotated in either direction.
The washer dryer is switched on.
Note:
■
Never switch on a damaged washer
dryer!
■
Inform your customer
service!~ Page 35
1. Insert mains plug.
2. Turn the tap on.
The end of the drying programme is
followed by an automatic fluff
cleaning cycle. The tap must be
turned on even when selecting a
drying programme.
The following figures are indicated
continuously on the display panel for
the selected programme:
■
the programme duration,
■
the preset temperature,
■
the preset spin speed and
■
the maximum load,
■
...
Adjusting the washing
programme
Note:
■
Always provide good ventilation in
the room where the washer dryer is
located so that air produced during
the drying phase can be evacuated.
■
Always keep the inlets and outlets
for the cooling air clear.
3. Open the door.
You can use the displayed default
settings or adjust the selected
programme optimally to the laundry
items by changing the default settings
or selecting additional functions. The
selectable settings and additional
functions depend on the selected
washing/drying programme.
Overview of programmes ~ Page 20
Notes
Options can be selected, deselected
or changed depending on the
progress of the programme.
■
14
Operating the appliance
■
The buttons are sensitive, they only
need to be touched gently. If the
button Temp.(Temperature), Spin
rpm(Spin speed), Finish in is held
down, the setting options are
automatically scrolled through.
Changing default settings for a
washing programme, e. g. washing
temperature:
Touch the Temp.(Temperature) button
to set desired washing temperature.
en
Adjusting the drying
programme
Note:
If an individual drying programme or
washing and drying without interruption
is selected, you can change the default
settings for the drying programme if
required.
Overview of programmes ~ Page 20
Changing the default settings for
a drying programme:
Touch the Dry button to set the desired
drying mode or drying time (only for an
individual drying programme).
Changing the additional functions for
a washing programme, e.g. select
( (SpeedPerfect):
1. Touch the Option button until the
( (SpeedPerfect) indicator light
comes on.
2. Touch Select button to select this
additional function, è indicator light
of ( (SpeedPerfect) function
comes on. To deselect the function,
touch the Select button agian, and
the è indicator light goes off.
Note:
After changing the programme default
settings and/or additional functions, the
programme duration may change.
Note:
After changing the default settings for
the drying programme, the programme
duration may change.
Loading the laundry
: Warning
Danger of death!
Laundry items pretreated with solventbased detergents, e.g. stain remover/
petroleum ether, may cause an
explosion if loaded into the washer
dryer.
Thoroughly rinse laundry items by hand
before washing.
Notes
Mix large and small items. Laundry
items of different sizes distribute
themselves better during the spin
cycle. Individual laundry items may
cause an unbalanced load.
■
15
en
■
Operating the appliance
Observe the indicated maximum
load. Overfilling adversely affects
the washing result and promotes
creasing.
1. Unfold presorted laundry items and
place in the drum.
2. Ensure that no laundry items are
trapped between the door and
rubber seal.
3. Close the door.
Note:
The indicator light on the Start/
Reload button flashes and the default
settings for the programme appear
continuously on the display panel.
Changes may be made to the default
settings.
Dosing and adding detergent
and care product
Caution!
Damage to the appliance
Detergents and agents for the
pretreatment of laundry (e.g. stain
remover, prewash sprays, etc.) may
damage the surfaces of the washer
dryer.
Keep these agents away from the
surfaces of the washer dryer. Using a
damp cloth, immediately remove any
fine spray residue and other residue/
droplets.
Dosing
Dose the detergents and care products
according to:
■
water hardness (ask your water
supply company),
16
■
■
■
the manufacturer’s specifications on
the packaging,
the amount of laundry,
soiling.
Filling the dispensers
1. Pull out the detergent drawer.
: Warning
Eye / skin irritation!
If the detergent drawer is opened
while the appliance is running,
detergent/care product may run out.
Carefully open the drawer.
If detergent/care product comes into
contact with eyes or skin, rinse
thoroughly.
If accidentally swallowed, seek
medical advice.
2. Pour in detergent and/or cleaning
product.
Dispenser I
Detergent for prewash.
Dispenser i Softener, starch. Do not exceed
the maximum load.
Dispenser II
Detergent for main wash, water
softener, bleach, stain remover.
Dispenser A For dosing liquid detergent.
Notes
Always follow the manufacturer's
instructions when dosing
all detergents, cleaning aids, care
products and cleaning agents.
■
Dilute viscous fabric softener
and fabric conditioner with water.
This will prevent blockages.
■
Be careful when opening the
detergent drawer while the appliance
is running.
■
Operating the appliance
■
If an individual drying programme is
selected, please do not add
detergent and/or care product in the
appliance.
Measuring aid* for liquid detergent
*depending on the model
Position the measuring aid for
measuring the correct amount of liquid
detergent:
1. Pull out the detergent drawer. Press
down the insert and fully remove the
drawer.
2. Slide the measuring aid forwards,
fold it down and click it into place.
3. Reinsert the drawer.
en
Starting the programme
Select Start/Reload. The indicator lamp
is lit and the programme starts.
Note: If you want to secure the
programme to prevent it from being
adjusted inadvertently, select the
childproof lock.
The display panel shows the Finished in
time while the programme is running or
the programme duration and the
programme progress symbols when the
washing programme has started.
Display panel ~ Page 10
Childproof lock
You can secure the washer dryer to
prevent the set functions from being
changed inadvertently. To do this,
activate the childproof lock when the
programme has started.
Note: Do not use the measuring aid for
gel detergents and washing powder, or
for programmes with prewash or when
"Finish in" time is selected.
For models without a measuring aid,
pour the liquid detergent into the
appropriate dispenser and place it in
the drum.
Activating/deactivating: Touch and hold
the button Finish in for approx. 5 s. The
symbol w is indicated in the display. If
the button signal is activated, an
acoustic signal sounds.
■
w lights up: The childproof lock is
activated.
■
w flashes: The childproof lock is
active and the programme selector
has been adjusted. To prevent the
programme from terminating, reset
the programme selector to the initial
programme. The symbol lights up
again.
Note:
The childproof lock may remain
activated until the next programme
starts, even after the washer dryer has
been switched off. If this is the case,
deactivate the childproof lock before the
programme starts and, if required, reactivate after the programme starts.
17
en
Operating the appliance
Reloading the laundry
When the programme has started, the
laundry can be reloaded or taken out as
required.
Select Start/Reload. The washer dryer
checks whether reloading is possible.
Notes
■
If there is a high water level, high
temperature or if the drum is
rotating, the door remains locked
for safety reasons and reloading is
not possible.
If the following is indicated on the
display panel:
A:02 + PAUS ~ Reloading is not
possible. To continue the
programme, select the Start/Reload
button.
« + OPEn are lit ~ Reloading is
possible.
■
Do not open the door until both the
symbols « + OPEn are lit.
■
Do not leave door open for
a prolonged period – water could
run out of the laundry.
■
The reloading function cannot be
activated during the drying phase.
Changing the programme
If you have started the wrong
programme by mistake, you can
change the programme as follows:
1. Select Start/Reload.
2. Select another programme. If
required, adjust the default settings
and/or select additional functions.
3. Select Start/Reload. The new
programme starts from
the beginning.
Interrupting or ending the
programme
For programmes at high temperature:
1. Select Start/Reload.
18
2. To cool down laundry: select Rinse.
3. Select Start/Reload.
For programmes at low temperature:
1. Select Start/Reload.
2. Select Spin or Drain
3. Select Start/Reload.
For drying programmes:
1. Select Intensive Dry or Gentle Dry.
2. Touch button Dry and set drying
time to 15 minutes.
3. Select Start/Reload.
End of the programme
– 0 – or – – – – (Rinse stop = without
final drain/spin cycle) is indicated in the
display and acoustic signal sounds.
Setting the signal ~ Page 27
If $ (Rinse stop = without final drain/
spin cycle) was selected, press Start/
Reload button to start the final drain/
spin cycle.
Notes
The programme continues by
pumping out the water and spinning
the laundry (the standard spin speed
can be changed beforehand).
■
If only the water is to be pumped out,
approx. 1 minute after the
programme starts, touch the Start/
Reload button before the spin cycle
starts, then turn the programme
selector to $ Off. The programme is
interrupted and the door lock is
released. The laundry can be
removed.
■
If hot flashes in the display before
the drying programme ends, the
temperature in the drum is high. The
programme for cooling the drum
runs until the temperature in the
drum has dropped.
■
Operating the appliance
en
After washing/drying
1. Open the door and remove the
laundry.
2. Turn the programme selector to
$ Off. The appliance is switched off.
3. Turn off the tap.
Not required for Aqua-Stop models.
~ Page 37
Notes
Do not leave any items of laundry in
the drum. In the next wash they may
shrink or discolour another item.
■
Remove any foreign objects from
the drum and the rubber seal – risk
of rust.
■
■
■
■
■
Leave the detergent drawer and
door open so that residual water can
evaporate.
Always remove the laundry.
Always wait until the programme
ends, as the appliance could still be
locked. Then switch the appliance
on and wait for the unlocking device.
When the display panel has gone
out at the end of the programme,
energy-saving mode is active. To
activate, select any button.
19
en
Overview of programmes
/ Overview of
programmes
Programme on the programme
selector
margsoepfweivOr
Programme/Type of washing
Name of the programme
Brief explanation of the programme and which textiles it is suitable
for.
Options/Information
maximum load according to
EN50229
maximum load for washing/
maximum load for drying
selectable temperature in °C
selectable spin speeds in rpm
possible additional functions for
washing
possible settings for drying
Cottons
max. 7(4)* kg/4 kg
Hard-wearing textiles, heat-resistant textiles made of cotton or linen. Ž (cold) – 90 °C
Note:
$ – 1400 rpm
* Reduced load for ( additional function.
(, ¦, Ã, l, æ, s
Aut 1, Aut 2
Easy-Care
max. 3.5 kg/2.5 kg
Textiles made of synthetic materials or blended fabrics.
Ž (cold) – 60 °C
$ – 1000 rpm
(, ¦, Ã, l, æ, s
Aut 1, Aut 2
Mixed fabrics
max. 3.5 kg/2.5 kg
Mixed load consisting of textiles made of cotton and synthetics.
Ž (cold) – 60 °C
$ – 1400 rpm
(, ¦, Ã, l, æ, s
Aut 1, Aut 2
Delicates/Silk
max. 2 kg
For delicate, washable textiles, e.g.made of silk, satin, synthetic
Ž (cold) – 40 °C
fibres or blended fabrics.
$ – 800 rpm
Note: Use a detergent suitable for machine washable delicate fab- (, Ã, l, æ, s
rics or silk.
–
20
Overview of programmes
Programme/Type of washing
h Wool
Hand and machine-washable fabrics made of wool or wool blend;
particularly gentle wash programme to prevent shrinkage of laundry, with longer programme breaks (soaking garments in the detergent solution).
Note:
■
Wool is of animal origin, e.g.: Angora, alpaca, llama, sheep.
■
Use a detergent suitable for machine washable wool.
Rinse
Washable textiles, Extra rinse with spin.
en
Options/Information
max. 2 kg
Ž (cold) – 40 °C
$ – 800 rpm
–
–
max. 7 kg
–
$ – 1400 rpm
Ã, l, æ
–
Spin
max. 7 kg
Extra spin with selectable spin speed.
–
400 – 1400 rpm
æ
–
Drain
max. 7 kg
Draining of the water inside the drum, e.g. after rinse stop $.
–
–
–
–
Rapid 15’ /Wash&Dry 60’
max. 3.5(2)* kg/1 kg
For small amount (≤1kg) lightly soiled garments made of cotton,
Ž (cold) – 40 °C
linen, synthetic or blended fabrics. Approx. 15 mins for washing. If $ – 1000 rpm
drying function is selected, it’s followed by another approx. 45 mins
(, l
drying process.
Aut 1
Note:
* Reduced load for ( additional function.
**Shirts/Business
max. 2.0 kg/2.0 kg
Suitable for Shirts/Blouses made of cotton, linen, synthetics fibres or Ž (cold) – 60 °C
blended fabrics.
$ – 800 rpm
(, ¦, Ã, l, æ, s
Aut 1, Aut 2
21
en
Overview of programmes
Programme/Type of washing
Textile Guard
Weatherproof and outdoor clothing with membrane coating and
water-resistant textiles.
Options/Information
max. 1 kg/1 kg
Ž (cold) – 40 °C
400 – 800 rpm
(, ¦, Ã, l
Aut 1
Fluff Clean
–
Special program for drum hygiene or fluff removal.
Ž (cold) – 40 – 90 °C
90 °C = antibacterial program, do not use detergent.
400 – 1400 rpm
40 °C = antibacterial program; special drum cleaning detergent can –
be used.
–
Ž (cold)= rinsing programme for the removal of fluff which has collected in the washer drum during the drying phase.
Refresh
max. 1 kg
Odour removal and wrinkle reduction program, suitable for wool,
–
linen, suits, etc. which do not need frequent washing.
–
–
–
Gentle Dry
max. 2.5 kg
Single gentle dry programme for drying garments with lower tem–
perature,
–
- by selecting Aut1 to achieve automatic cupboard dry result,
–
- by selecting Aut2 to achieve automatic extra dry result,
- self-defined drying time selectable from 30, 60, 90 to 120 mins.
Aut 1, Aut 2, Time dry**
Note:
** 15 min drying time is for cooling down the laundry and machine
after drying process.
Intensive Dry
max. 4 kg
Single normal dry program for drying garments with higher tempera- –
ture.
–
- by selecting Aut1 to achieve automatic cupboard dry result,
–
- by selecting Aut2 to achieve automatic extra dry result,
- self-defined drying time selectable from 30, 60, 90 to 120 mins.
Aut 1, Aut 2, Time dry**
Note:
** 15 min drying time is for cooling down the laundry and machine
after drying process.
22
Overview of programmes
en
Drying table
Cottons/coloureds (textiles made of cotton or linen such as underwear, T-shirts, sweaters, trousers,
kitchen towels)
Dry weight in kg
0,5 _1,0 1,0 _ 2,0
2,0 _ 3,0
3,0 _ 4,0
Estimated drying time in min
Cupboard dry Aut1
< 60
60 _ 85
Extra dry
< 65
65 _ 100 100 _140 140 _170
Aut2
Recommended
programme
85 _ 120
120 _ 160
_ 0,5
_ 1,0
_ 2,0
_ 2,5
Adjustable drying time in min
30
Intensive Dry (Auto)
60
90
120
Intensive Dry (Time)
Quilt/terry cloth (larger or thick textiles made of cotton such as terry cloths, bed sheets, table cloths, jeans,
work clothes)
Dry weight in kg
0,5 _1,0 1,0 _ 2,0
2,0 _3 ,0
3,0 _ 4,0
Estimated drying time in min
Cupboard dry Aut1
< 70
70 _ 95
Extra dry
< 75
75 _ 110 110 _ 150 150 _ 180
Aut2
Recommended
programme
95 _ 130
130 _ 170
_0,5
_1,0
_1,5
_2,0
Adjustable drying time in min
30
Intensive Dry (Auto)
60
90
120
Intensive Dry (Time)
Easy-care (Textiles made of synthetic or blended fabrics such as shirts, sportswear, delicate items)
Dry weight in kg
0,5 _ 1,0 1,0 _ 2,0
2,0 _ 2,5
Estimated drying time in min
Cupboard dry Aut1
< 55
55 _ 95
Extra dry
< 65
65 _ 130 130 _ 160
Recommended
programme
±
±
Aut2
95 _ 130
Gentle Dry (Auto)
_ 0,5
_ 1,0
_ 1,5
_ 2,0
Adjustable drying time in min
30
60
90
120
Gentle Dry (Time)
The times are approximate and refer to a normal load, standard spin programme and room temperature.
The maximum selectable drying time is 120 min. If the laundry weighs more than 2.5 kg, select automatic drying. This function is recommended to ensure good drying results and save energy. The 15-minute
drying programme is used to cool the laundry.
23
en
Changing programme default settings
Starching
Note: The laundry should not be
treated with fabric softener.
Liquid starch can be used in all wash
programmes. Pour starch into the
dispenser M according to
manufacturer’s specifications
(if required, clean beforehand).
0 Changing programme
default settings
You can change the default settings for
selected programmes. The settings can
be changed even while the selected
programme is running. The effects
depend on the progress of the
programme.
sgnites luafmedrgopnigCah
Dyeing/Bleaching
Dye in household quantities only. Salt
may attack stainless steel! Observe
specifications of the dye manufacturer!
Do not bleach laundry in the washer
dryer!
Soaking
1. Pour soaking agent/detergent into
dispenser II according
to the manufacturer’s instructions.
2. Set the programme selector to
Cottons 60°C and select Start/
Reload.
3. After approximately 10 minutes
select Start/Reload.
4. After the required soaking time,
reselect Start/Reload if the
programme is to be continued or
change the programme.
Note: Load laundry of the same colour.
No additional detergent is required,
the soaking solution is used for
washing.
#
Temp.
(: The indicated washing
temperature can be changed. The
maximum selectable washing
temperature varies depending on the
selected programme.
Overview of programmes ~ Page 20
Spin rpm
0: The spin speed can be changed
before and during the programme (in
rpm, revolutions per minute) depending
on the progress of the programme.
Setting $ (Rinse stop = without final
drain/spin cycle), laundry remains in the
water after the last rinse cycle. The
maximum spin speed depends on the
programme and model.
Overview of programmes ~ Page 20
Dry
8: The drying function can be
activated, deactivated and set with this
button. Washing and drying without
interruption is possible in automatic
mode only. If the programme for
individual drying is selected, automatic
24
Changing programme default settings
drying or timed drying with a required
drying duration is available.
Notes
■
Programme selection in Intensive
Dry or Gentle Dry position to select
an individual drying programme.
Overview of programmes
~ Page 20
The standard drying mode is Aut1.
In this mode the drying time is
automatically set according to the
amount of laundry to be dried. The
result is cupboard-dry laundry.
Drying mode can be set to Aut2 in
order to obtain an extra dry result; or
preselect the drying time which can
be specified by selecting the Dry
button.
Cupboard dry (Aut1): For singlelayer fabrics. Garments can be
folded or hung up in a cupboard.
Extra dry (Aut2): For fabrics made
of thick, multilayered items of
clothing, which need to be dried
longer. Garments can be folded or
hung up in a cupboard. Laundry
more dry than Cupboard dry.
Programme selection in washing
programmes and if washing and
drying is required without
interruption (only for Rapid 15’,
Cottons, Easy-Care, Mixed Fabrics,
Shirts/Business and Textile
Guards):
1. Touch button Dry and activate the
function Aut1 or Aut2.
2. Do not exceed the maximum loads
for drying.
Overview of programmes
~ Page 20
3. Maximum spin speed for the
washing programme will be selected
automatically to obtain a good
drying result.
■
en
Finish in
@: Define the Finish in time (end
of programme).
Note: The respective programme
duration is displayed by selecting
the programme. The programme
duration is automatically adjusted while
the programme is running if the
programme duration needs to be
changed, e.g. due to changes in the
programme default settings.
Before the programme starts, the end of
the programme can be preselected in
hourly increments up to a maximum of
24h.
When the programme has started,
the preselected time is displayed e.g.
8 h and counts down until
the programme starts. Then the
programme duration is displayed,
e.g. 2:30.
When the programme has started,
the preselected time can be changed
as follows:
1. Select Start/Reload.
2. Select the Finish in button
and change the Finish in time.
3. Select Start/Reload.
25
en
Selecting additional functions
\ Selecting additional
functions
Select the desired additional functions
Option button, keep on touching the
button until the indicator light of your
desired additional functions flashes and
then activate the chosen function with
Select button, the è indicator light
comes on. The additional function is
selected or touch the Select button
again to deactive this additional
function.
snoitcuf lanoitdagnitceSl
z (Water Plus)
Increased water level and extended
wash time. For areas with very soft
water or for further enhancing the
washing result.
l (Rinse plus)
Additional rinse cycle. For areas with
very soft water or for an even better
rinsing result.
Note:
Select l (Rinse Plus) by Option button.
Then touch Select button to select the
desired rinse cycles (max. 3 cycles,
depend on selected programmes).
æ (Less iron)
( (SpeedPerfect)
For a shorter wash time with a
comparable washing effect to the
standard programme.
Note: Do not exceed maximum load.
Overview of programmes ~ Page 20
¦ (EcoPerfect)
Energy-optimised washing by reducing
the temperature while achieving a
consistent washing result.
Note: The washing temperature is
lower than the selected temperature.
For special hygiene requirements, it is
recommended that a higher
temperature be selected or the
( (SpeedPerfect) option be used for a
5 kg load.
26
Special spin sequence with subsequent
fluffing. Gentle final spin – residual
moisture in the laundry increased
slightly.
s (Prewash)
Actuate prewash. For heavily soiled,
hard-wearing washing, e.g. made of
cotton or linen.
Setting the signal
en
M Setting the signal
langisehtgni Ste
1. Activate setting mode for the signal volume
Turn to $ Off.
Turn one position Press and hold Temp. button +
clockwise.
turn one position clockwise.
Release the button,
figure apperas in the
display.
2.a Set the volume for the button signals (depending on model)
Touch the Finish in button until
the required volume is reached
Go to step 2.b. or
Set to $ Off, swhich exits setting mode
for the signal volume.
2.b Selecting the volume for the information signals
Turn one position clockwise.
Touch the Finish in
button until the
required
volume is reached.
Set to $ Off, which exits setting
mode for the signal volume.
27
en
Cleaning and maintenance
2 Cleaning and
maintenance
: Warning
Risk of electric shock!
Danger of death if live parts are
touched.
Switch off the appliance and disconnect
at the mains plug.
follow the instructions of the descaling
agent manufacturer. Suitable descalers
can be purchased on our website or
from customer service. ~ Page 35
ecnatmidgnaeCl
: Warning
Risk of poisoning!
Solvent-based cleaning agents, e.g.
petroleum ether, in the washer dryer
may cause toxic vapours.
Do not use solvent-based cleaning
agents.
Caution!
Damage to the appliance
Solvent-based cleaning agents, e.g.
petroleum ether, may damage the
surfaces and components of the washer
dryer.
Do not use solvent-based cleaning
agents.
Machine housing/Control
panel
■
■
■
■
Immediately remove washing and
cleaning agent residue.
Wipe with a soft, damp cloth.
Do not use abrasive cloths, sponges
or detergents (stainless steel
cleaner).
Do not clean the appliance with a
water jet.
Drum
Use chlorine-free cleaning agents, do
not use steel wool.
Descaling
Not required if detergent dosed
correctly. However, if this does occur,
28
Cleaning the detergent
dispenser
If it contains detergent or fabric softener
residue:
1. Pull out the detergent drawer.
Depress the insert and remove the
drawer completely.
2. Take out insert: using your finger,
press insert upwards.
3. Clean the detergent dispenser and
insert with water and a brush and
dry.
4. Attach the insert and lock into
position (push the cylinder onto the
guide pin).
5. Insert detergent drawer.
Note: Leave the detergent drawer open
so that residual water can evaporate.
Drain pump blocked
: Warning
Risk of scalding!
Washing water is hot when washing at
high temperatures. You may be scalded
if you touch the hot washing water.
Allow the washing water to cool down.
1. Turn the tap off to prevent more
water from flowing in and to ensure
that it is drained via the detergent
solution pump.
2. Turn the programme selector to
$ Off. Pull out the mains plug.
Cleaning and maintenance
3. Open the service flap.
4. Take the drainage hose out of the
holder.
5. Remove the cover flap, draining the
washing water into a suitable
container. Press on the cover flap
and insert the drainage hose into the
holder.
Note: Residual water may run out.
6. Carefully unscrew the pump cover.
Clean the interior, pump cover
thread and pump housing (the fan
impeller in the detergent-solution
pump must be able to rotate).
7. Reinsert and screw on the pump
cover. Handle should be vertical.
8. Close the service flap. If required,
engage the disengaged service flap
beforehand.
Note: To prevent unused detergent
from flowing into the outlet during the
next wash: Pour 1 litre of water into
dispenser II and start the Spin or Drain
programme.
Drainage hose on the siphon
blocked
1. Turn the programme selector to
$ Off. Pull out the mains plug.
2. Loosen hose clip, carefully remove
drainage hose. Residual water may
run out.
en
3. Clean drainage hose and siphon
spigot.
4. Re-attach the drainage hose and
secure the connection point with the
hose clip.
Filter in the water inlet hose
blocked
: Warning
Danger of death!
Do not immerse the Aqua-Stop safety
device in water (it contains an electric
valve).
First, reduce the water pressure in the
supply hose:
1. Turn off the tap.
2. Select any programme (except Spin
or Drain).
3. Select Start/Reload. Allow the
programme to run for approx. 40 s.
4. Turn the programme selector to
$ Off. Pull out the mains plug.
5. Clean the filter on the tap:
Disconnect the hose from the water
tap.
Clean the filter with a small brush.
6. Clean the filter on the back of the
appliance:
Remove the hose from the rear of
the appliance.
29
en
Faults and what to do about them
Take out the filter with pliers and
clean it.
3 Faults and what to do
about them
Emergency release, e.g. if a
power failure occurs
meht uobadt wahdnstluFa
7. Connect the hose and check for
leaks.
Air filter blocked
1. Turn the programme selector to
$ Off. Pull out the mains plug.
2. Open and remove the service flap.
3. Take out the air filter.
The programme continues running
when the power supply is restored. If
the laundry is still to be removed, the
door can be opened as described
below:
: Warning
Risk of scalding!
When washing at high temperatures,
you may be scalded if you touch hot
washing water or the laundry.
If required, leave to cool down.
: Warning
Risk of injury!
If you reach into the rotating drum, you
may injure your hands.
Do not reach into the rotating drum.
Wait until the drum stops rotating.
4. Rinse fluff off the air filter using
a brush under running water.
5. Re-insert the air filter.
6. Re-insert and close the service flap.
Caution!
Water damage
Leaking water may cause damage.
Do not open the door if you can still see
water through the glass.
1. Turn the programme selector to
$ Off. Pull out the mains plug.
2. Drain the detergent solution.
3. Pull down emergency release with
a tool and release.
Door can then be opened.
30
Faults and what to do about them
en
Information on the display
panel
Display
Cause/Remedy
A:01
Close the door immediately because of the rising water level. If an interruption
occurs, A:01 and OPEn are displayed alternately.
A:02
The door is locked for safety reasons (water level and/or temperature too high).
■
Washing programme: In pause mode A:02 and PAUS are displayed alternately. If you have to open the door, wait until the temperature has dropped
slightly or pump out the water (select e.g. Spin or Drain ).
■
Drying programme: If you have to open the door, wait until the temperature
has dropped slightly or set the drying programme to 15 min to cool down the
laundry.
If A:02 is frequently displayed at the end of the drying programme:
■
Clean the air filter. ~ Page 30
■
Run the Fluff Clean Ž (cold) programme without laundry.
A:03
Door cannot be locked/unlocked due to high temperature. Leave the washer dryer
switched on for about 1 min. The washer dryer can then be locked/unlocked again.
hot
The door cannot be opened after the drying programme due to the high temperature. The cooling process continues until the display disappears, after which the
door can be opened.
|
■
■
Flashes (no water supply): Tap turned on? Water inlet filter blocked? Clean
the water inlet filter. ~ Page 29
Water hose kinked or blocked?
Lights up (low water pressure): For information only. This will not affect the
programme progress. The programme duration is extended.
E:18
Drain pump blocked; clean the drain pump. Clean the drainage hose
on the siphon.
ªªª
■
■
■
Hold down button Dry for 3 seconds to delete the display.
Clean the air filter. ~ Page 30
Run the Fluff Clean Ž (cold) programme without laundry.
LO kg, HI kg
Laundry amount information. On when drying phase finished.
LO kg: Signals a small load for drying,
HI kg: Signals a very high load for drying.
Other displays
Turn the programme selector to $ Off. The appliance is switched off. Wait 5 s and
switch on again. If the display is indicated again, call customer service.
31
en
Faults and what to do about them
Faults and what to do about
them
Faults
Cause/Remedy
Water is running out.
■
■
Water not flowing in.
Detergent not dispensed.
■
■
■
■
The washing machine
door cannot be opened.
■
■
■
■
Programme does not
start.
Detergent solution is not
drained.
■
■
■
■
■
Water not visible in the
drum.
Spin result not satisfactory.
Laundry wet/too damp.
Spin cycle activated several times.
Residual water in the dispenser for care product.
Compartment M is not
rinsed out completely.
Odour formation in the
washer dryer.
Status display o is on.
Foam may come out of
the detergent drawer.
Excessive noise, vibrations and “wandering”
during the spin cycle.
32
Correctly attach/replace drainage hose.
Tighten screw-fitting on the supply hose.
Start/Reload not selected?
Tap not open?
Filter blocked? Clean the filter~ Page 29
Supply hose kinked or jammed?
Safety function active. Stop programme?
$ (Rinse stop = without final drain/spin) selected?
Can be opened with emergency lock release only? ~ Page 30
Childproof lock active? Deactivate. ~ Page 17
Start/Reload or Finish in selected?
Door closed?
$ (Rinse stop = without final drain/spin) selected?
Clean the drain pump. ~ Page 28
Clean outlet pipe and/or drainage hose.
Not a fault – water below the visible area.
■
■
Not a fault – unbalanced load detection system has stopped the spin
cycle, washing unevenly distributed. Distribute small and large items of
washing in the drum.
Too low speed selected?
Not a fault – unbalanced load detection system adjusts imbalance.
■
■
Not a fault – effect of the care product not impaired.
If required, remove the insert. Clean the detergent drawer and re-insert it.
Remove the insert. Clean the detergent drawer and reinsert it.
■
■
Run the Fluff Clean 90°C programme without laundry.
Use standard detergent.
Too much detergent used?
■
Mix 1 tablespoon of fabric softener with ½ litre of water and pour into
dispenser II. (Not for outdoor, sports and down-filled textiles!)
■
Reduce detergent dosage for the next wash cycle.
■
Use commercially available low foam detergent and care products which
are suitable for washer dryers.
■
■
■
Appliance aligned? Align the appliance. ~ Page 42
Appliance feet fixed? Secure appliance feet. ~ Page 42
Transportation protection devices removed? Removing the transportation
protection devices ~ Page 39
Faults and what to do about them
Faults
Display panel/indicator
lights do not function
while the appliance is running.
The programme duration
changes during the wash
cycle.
Detergent residue on the
washing.
en
Cause/Remedy
■
■
■
■
■
■
■
Power failure?
Fuse tripped? Switch on/replace fuse.
If the fault occurs repeatedly, call customer service. ~ Page 35
Not a fault – unbalanced load detection system adjusts imbalance.
Not a fault – foam detection function active. Additional rinse cycle.
Occasionally phosphate-free detergents contain water-insoluble residue.
Select Rinse or brush items when the laundry is dry.
Spin noise during the dry- This is an innovative process known as thermal spinning used to reduce
ing phase.
energy consumption during the drying phase.
Different coloured fluff
Run the Fluff Clean Ž (cold) programme without laundry to remove fluff
from the previous drying which has collected in the washer drum during the drying phase.
cycle is deposited on the
laundry during the subsequent wash cycle.
Water inlet noise during The washer dryer runs a self-cleaning cycle to remove fluff which was deposthe drying phase, the tap ited by the laundry during the drying phase. This requires a little water. Theresymbol flashes during the fore, the tap must be turned on even during the drying phase.
drying phase.
Drying duration extended.
■
■
■
Drying programme does
not start.
■
■
■
According to the air cooling principle, a higher ambient temperature will
result in poor drying performance, so the drying time will be extended.
Ensure good ventilation to allow surplus heat to escape.
Air filter blocked? Clean the air filter ~ Page 30
Run the Fluff Clean Ž (cold) programme to remove fluff which has collected in the washer drum during the drying phase.
Drying programme not selected? Overview of programmes ~ Page 20
Door not closed properly?
Pump blocked? Clean the drain pump. ~ Page 28
33
en
Faults and what to do about them
Faults
The drying result is not
satisfactory (laundry is
not dry enough).
Cause/Remedy
■
■
■
■
■
■
When the door is opened,
you will notice that a small
amount of water drips
onto the dried laundry.
■
■
Excessively high ambient temperature (above 30 °C) or inadequate ventilation in the room in which the washer dryer is situated. Ensure adequate
ventilation to allow surplus heat to escape.
The laundry has not been spun well enough before drying. Always set the
highest selectable spin speed for the particular washing programme.
Washer dryer overloaded: Observe the recommendations for the maximum load in the programme table and on the load display. Do not overload
the washer dryer, as the maximum load for the drying phase is less than
the maximum load for the wash cycle. Unload the washer dryer after washing with the maximum load and divide the laundry into two drying cycles.
The power supply voltage is too low (below 200 V) – provide a suitable
power supply.
Air filter blocked? Clean the air filter ~ Page 30
Thick multilayered textiles or textiles with thick fillings dry easily on the surface, but not inside. This equalisation process may take longer. For these
types of textiles, select the timed drying programmes.
The drying time is reduced for a smaller load. Some residual moisture may
remain in the dryer system. If the door is opened quickly, a suction effect is
generated which causes the moisture to drip out of the dryer system.
Open the door slowly. Avoid wrenching the door open.
If a fault cannot be rectified (switching the machine on and off) or a repair is required:
■
Set the programme selector to $ Off and pull out the mains plug.
■
Turn off the tap and call customer service. ~ Page 35
34
Customer service
4 Customer service
If you cannot correct the fault yourself,
see section, Faults and what to do
about them ~ Page 32, please contact
our customer service. We will always
find a suitable solution and aim to avoid
unnecessary visits by technicians.
Please give customer service the
product number (E-Nr.) and the
production number (FD) of the
appliance.
en
J Technical
specifications
ecivrsmoetCu
(1U
Product number
)'
Production number
You can find this information on: the
inside of the door */opened service
flap * and the back of the appliance.
*depending on model
Rely on the competence of the
manufacturer.
Contact us. You can therefore be sure
that the repair is carried out by trained
service technicians who carry original
spare parts.
snoitacfiepslacinhTe
Dimensions
(width x depth x
height)
60 x 59 x 84,5 cm
Weight
83 kg
Mains connection Nominal voltage
220–240 V, 50 Hz
Maximal current 10 A
Maximal washing power
2400 W
Maximal drying power 1900 W
Water pressure
100–1000 kPa
(1–10 bar)
Drain height
60–100 cm
35
en
Consumption values
[ Consumption values
seulavnoimuCstp
Programme
Option
Load
(kg)
Energy
Water
Programme
consumption *** Consumption *** duration ***
(kWh)
(liter)
(hours)
Cottons 20 °C *
7,0
0,23
73
2¾
Cottons 40 °C *
7,0
1,02
73
2¾
Cottons 60 °C
7,0
1,10
73
2¾
Cottons 90 °C
7,0
2,05
83
2¾
3,5
0,56
60
1¾
Mixed Fabrics 40 °C
3,5
0,45
53
1
Delicates/Silk 30 °C
2,0
0,15
29
¾
Wool 30 °C
2,0
0,18
40
¾
Intensive Dry
4,0
2,47
3,0
2½
Gentle Dry
2,5
1,46
3,0
2
7,0
0,70
51
4
4,76
57
8½
Easy-Care 40 °C *
¦ (EcoPerfect)
Cottons 60 °C **
¦ (EcoPerfect)
Cottons 60 °C +
Intensive Dry **
¦ (EcoPerfect) 7,0/4,0
*
Program setting for tests according to currently valid EU standard EN60456. For comparison test,
please test the programs with specified load and maximum spin speed.
** EU energy label washing performance tests according to EN50229, are conducted using specified load
on Cottons 60°C + ¦ (EcoPerfect).
** EU energy label drying performance tests are conducted according to EN50229. Maximum washing
load is divided into 2 drying cycles and each drying load is dried by using Intensive Dry + Aut 1 option.
*** The values may deviate from the stated values depending on the following factors: water pressure and
hardness, inlet temperature, ambient temperature, type and amount of laundry, type and amount of detergent used, fluctuation of power supply and additional functions selected.
36
Installation and connection
Note:
A hose clip Ø 24–40 mm (specialist
store) is also required for connection
to a siphon.
Connecting the water ~ Page 40
5 Installation and
connection
Standard accessories
noitcednaoitlasnI
Note: Check the washer dryer for
damage sustained in transit. Do not
switch on a damaged washer dryer. If
you have any complaints, contact the
dealer where you purchased the
appliance or our customer service.
Useful tools:
Spirit level for alignment ~ Page 42
■
Size 13 socket wrench:
for loosening the transportation
protection devices ~ Page 39 and
size 17: for aligning the appliance
feet ~ Page 42
■
Installation
#
en
+
Note: Humidity in the drum is caused
by the final inspection.
Secure installation
: Warning
Risk of injury!
The washer dryer is heavy. Take
care when lifting it.
■
When lifting the washer dryer by its
projecting parts (e.g. washer dryer
door), the parts may break off and
cause injuries.
Do not lift the washer dryer by its
projecting parts.
■
If the hoses and power cables are
installed incorrectly, there is a risk of
stumbling and injury.
Lay hoses and cables in such a way
that there is no risk of stumbling.
■
3
Depending on the model:
# Aqua-Stop
@ Operating and
installation
instructions
+ Aqua-Secure
H Elbow for fixing the
water drainage hose
3 Standard
P Covers
( Water supply
0 Power cord
8 Water
drainage hose
Caution!
Damage to the appliance
■
Frozen hoses may tear or burst.
Do not install the washer dryer
outdoors and/or in an area where
there is a risk of frost.
■
When lifting the washer dryer by its
projecting parts (e.g. washer dryer
door), the parts may break off and
cause injuries.
Do not lift the washer dryer by its
projecting parts.
37
en
Installation and connection
Installation area
Note: Stability is important to prevent
the washer dryer from wandering!
■
The installation area must be firm
and level.
■
Soft floors and floor coverings are
not suitable.
■
To ensure good drying results,
ensure that the room is well
ventilated.
: Warning
Risk of scalding!
During the drying phase, warm air is
emitted at a temperature of
up to 60 °C.
Notes
Required dimensions:
a = 650 mm
b = 620 mm
c = 850 mm
■
Installing the appliance on
a base or on a wooden joist
ceiling
Caution!
Damage to the appliance
The washer dryer may wander during
the spin cycle and topple or fall off its
base.
Always secure the washer dryer feet
with holding brackets.
Holding brackets: order no.
WMZ 2200, WX 9756, CZ 110600,
Z 7080X0.
Note: If installing on a wooden joist
ceiling:
■
If possible, install the washer dryer in
a corner.
■
Screw water-resistant wooden board
(min. 30 mm thick) to the floor.
Installing the appliance under/
between kitchen units
: Warning
Risk of electric shock!
Danger of death if live parts are
touched.
Do not remove the appliance cover.
Build under/build in before connection
to the power supply.
38
H
I F
G
D
E
■
■
Only install the washer dryer under a
continuous worktop connected firmly
to the adjacent cupboards.
Ventilate the installation area well,
otherwise the optimum drying results
will not be achieved. Dimensions of
the ventilation openings (to be
provided on one side, depending on
the circumstances).
Opening cross-section:
d x e = 200 mm x 100 mm.
Height above floor: f = 365 mm.
Distance between wall and
appliance: 50 mm.
Installation and connection
en
Removing the transportation
protection devices
Caution!
Damage to the appliance
■
Before using the washer dryer for the
first time, it is essential to remove all
4 transportation protection devices.
Keep the transportation protection
devices. The washer dryer is
secured for transportation with
transportation protection devices.
Transportation protection devices
which have not been removed may
damage the drum, for example,
while the washer dryer is running.
■
To prevent damage in transit when
transporting the appliance at a later
date, always re-install the
transportation protection devices
prior to transportation. ~ Page 43
5. Insert the covers. Lock firmly by
pressing on the locking hook. Insert
the hose holder.
Hose and cable lengths
Connection on left side
aFP
Keep the screw and sleeve screwed
together.
1. Take the hoses out of the holders.
2. Take hoses out of the elbow and
remove the elbow.
3. Loosen and remove all
4 transportation lock screws.
aFP
aFP
or
Connection on right side
aFP
aFP
4. Take the power cord out of the
holders. Remove the sleeves.
aFP
PLQ
FP
PD[
FP
39
en
Installation and connection
Note: If the hose holders are used, the
possible hose lengths are reduced!
Water supply
Available from dealer/customer
service:
■
Extension for Aqua-Stop or cold
water inlet hose (approx. 2.50 m).
Order no. WMZ2380, WZ10130,
CZ11350, Z7070X0.
■
Longer supply hose (approx.
2.20 m), for standard model.
Notes
■
Do not kink, crush, alter or cut
through the water supply hose
(otherwise, its strength can no longer
be guaranteed).
■
Only tighten the screw connections
by hand. If the screw connections
are tightened too tightly using a tool
(pliers), the threads may be
damaged.
Connecting the water
: Warning
Risk of electric shock!
Danger of death if live parts come into
contact with water.
Do not immerse the Aqua-Stop safety
device in water (it contains an electric
valve).
Caution!
Water damage
The connection points for the water
supply and water drainage hoses are
under high pressure. To prevent
leakage or water damage, always follow
the instructions in this chapter!
Notes
■
In addition to the safety information
listed here, the local water and
electricity supplier may have special
requirements.
■
Operate the washer dryer with cold
drinking water only.
■
Do not connect the washer dryer to
the mixer tap of an unpressurised
hot water boiler.
■
Use only the inlet hose supplied or
one purchased from an authorised
specialist outlet. Never use an used
one!
■
If in doubt, have the appliance
connected by a technician.
40
Optimum water pressure in the mains:
100–1000 kPa (1–10 bar)
■
When the tap is turned on, the water
flow is at least 8 l/min.
■
If the water pressure is higher, install
a pressure reducing valve.
1. Connect the water supply hose to
the tap (¾" = 26.4 mm) and to the
appliance (except models with
Aquastop):
– Standard
– Aqua-Secure
– Aqua-Stop
Installation and connection
2. Carefully turn on the tap and check
that the connection points are not
leaking.
en
and damage the washer dryer and/or
textiles.
Ensure that:
■
the sealing plug does not block the
outflow of the washbasin.
■
the water drains quickly enough.
■
the end of the drainage hose is not
immersed in the drained water.
Installing the drainage hose:
Note: The screw connection is under
water pipe pressure.
Water drainage
Notes
■
Do not kink or overextend the water
drainage hose.
■
Height difference between the
placement area and drainage point:
Minimum 60 cm –
maximum 100 cm
Drainage into a wash basin
Drainage into a siphon
The connection point must be secured
with a Ø 24–40 mm hose clip
(specialist store).
Connecting
: Warning
Risk of scalding!
When washing at high temperatures,
you may be scalded if you touch the hot
washing water (e.g. if draining hot
washing water into a washbasin).
Do not touch the hot washing water.
Caution!
Water damage
If the attached drainage hose slips out
of the washbasin due to high water
pressure when draining the appliance,
leaking water may cause damage.
Secure the drainage hose to prevent
it from slipping out of the washbasin.
Drainage into a plastic pipe
with rubber sleeve or into
a gully
Connecting
Caution!
Damage to appliance/textiles
If the end of the drainage hose is
immersed in the drained water, water
may be drawn back into the appliance
41
en
Installation and connection
Alignment
Electrical connection
1. Loosen the lock nut in a clockwise
direction with a wrench.
2. Check the alignment of the washer
dryer with a spirit level and, if
required, correct. Adjust the height
by rotating the appliance foot.
Note: All four appliance feet must
be firmly on the floor.
The washer dryer must not wobble!
3. Tighten the lock nut against the
housing.
Grip the foot and do not adjust the
height.
Electrical safety
Notes
The lock nuts on all four appliance
feet must be screwed tightly against
the housing!
■
Any loud noises, intense vibrations
or “wandering” may be due to
incorrect alignment!
■
42
: Warning
Risk of electric shock!
Danger of death if live parts are
touched.
■
When disconnecting the main plug,
always pull the plug itself and not the
cable, otherwise the cable could be
damaged.
■
Never touch or hold the mains plug
with wet hands.
■
Never pull out the mains plug during
operation.
■
Only connect the washer dryer to an
alternating current using a correctly
installed earthed socket.
■
The mains voltage must be the same
as the voltage specifications on the
washer dryer (appliance rating
plate).
■
The connected load and the required
fuse are also indicated on the
appliance rating plate.
Ensure that:
■
The mains plug and socket match.
■
The cable cross-section is adequate.
■
The earthing system has been
installed correctly.
■
A damaged power cord is only
replaced by an electrician.
A replacement mains cable can be
obtained from customer service.
■
You do not use multiple plugs/
couplings or extension cables.
■
If a residual-current-operated circuit
breaker is used, you use only a type
which features this symbol: z.
Only this symbol guarantees
compliance with the currently valid
regulations.
■
The mains plug is always accessible.
■
The power cord is not kinked,
crushed, altered or severed and has
not come into contact with any heat
sources.
Installation and connection
Before washing/drying for the
first time
The washer dryer was inspected
thoroughly before leaving the factory. To
remove any residual test water, run the
Fluff Clean 40°C programme the first
time without laundry.
Note:
The washer dryer must have been
installed and connected properly.
Installation and connection
~ Page 37
■
Never switch on a damaged
machine. Inform your customer
service. ~ Page 35
■
Insert mains plug.
Turn the tap on.
Switch on the appliance.
Close the washing machine door. Do
not load any laundry.
5. Select the Fluff Clean 40°C
programme.
6. Open the detergent drawer.
7. Pour approx. 1 litre of water into
dispenser II.
8. Add standard detergent to
dispenser II according
to manufacturer’s instructions for
light soiling.
Note:
To prevent frothing, use only half the
recommended amount of detergent.
Do not use detergent for wool or
delicates.
9. Close the detergent drawer.
10. Select Start/Reload.
11. When the programme ends, switch
off the appliance.
1.
2.
3.
4.
en
Transportation
Preparatory work
1. Turn off the tap.
2. Release the water pressure in the
supply hose.
Filter in the water inlet hose blocked
~ Page 29
3. Drain any residual washing water.
Drain pump blocked ~ Page 28
4. Disconnect the washer dryer from
the power supply.
5. Remove the hoses.
Installing transportation protection
devices:
1. Remove the covers and keep in a
safe place.
If required, use a screwdriver.
2. Insert all 4 sleeves.
Clamp the mains cable on the
holders. Insert and tighten the bolts.
Before switching on the appliance:
Notes
Always remove the transportation
protection devices!
■
To prevent unused detergent from
flowing into the outlet during the next
wash: Pour 1 litre of water into
dispenser II and start the Spin or
Drain programme.
■
Your washer dryer is now ready for
use.
43
Repair order and advice in the event of faults
GB
0344 892 8999 (Calls charged at local or mobile rate.)
IE
01450 2655 (0.03 € per minute at peak. Off peak 0.0088 € per minute.)
You can find the contact information for all countries in the attached after-sales service
directory.
BSH Hausgeräte GmbH
Carl-Wery-Straße 34
81739 München
GERMANY
siemens-home.com
*9000907639*
9000907639
(9503)