Always there to help you
IImportant
Register your product and get support at
Safety
www.philips.com/support
Question?
Contact
Philips
SB5200
Only use attachments/accessories specified by the manufacturer.
Use only power supplies listed in the user manual.
The product shall not be exposed to dripping or splashing.
Do not place any sources of danger on the product (e.g. liquid filled
objects, lighted candles).
Batteries (battery pack or batteries installed) shall not be exposed to
excessive heat such as sunshine, fire or the like.
Where the plug of the Direct Plug-in Adapter is used as the
disconnect device, the disconnect device shall remain readily operable.
Warning
••
••
••
••
••
User manual
Never remove the casing of this apparatus.
Never lubricate any part of this apparatus.
Never place this apparatus on other electrical equipment.
Keep this apparatus away from direct sunlight, naked flames or heat.
Ensure that you always have easy access to the power cord, plug or adaptor
to disconnect the apparatus from the power.
Compliance
Note
•• The type plate is located on the back of the product.
Care of the environment
Environmental information
All unnecessary packaging has been omitted. We have tried to make
the packaging easy to separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene (bags, protective foam
sheet.)
Your system consists of materials which can be recycled and reused if
disassembled by a specialized company. Please observe the local
regulations regarding the disposal of packaging materials, and old
equipment.
Your product is designed and manufactured with high quality
materials and components, which can be recycled and reused.
Please inform yourself about the local separate collection system for
electrical and electronic products.
Please act according to your local rules and do not dispose of your old
products with your normal household waste. Correct disposal of your
old product helps to prevent potential negative consequences for the
environment and human health.Please inform yourself about the local
rules on separate collection of batteries because correct disposal helps
to prevent negative consequences for the environmental and human
health.
Always bring your product to a professional to remove the built-in
battery.
Notice
2014 © WOOX Innovations Limited. All
rights reserved.
Philips and the Philips’ Shield Emblem are
registered trademarks of Koninklijke Philips
N.V. and are used by WOOX Innovations
Limited under license from Koninklijke
Philips N.V.
SB5200_77_Short User Manual_EN_V1.0
The Bluetooth® word mark and logos are
registered trademarks owned by Bluetooth SIG, Inc. and any use of
such marks by Philips is under license.
Specifications are subject to change without notice. Trademarks are
the property of Koninklijke Philips Electronics N.V or their respective
owners. Philips reserves the right to change products at any time
without being obliged to adjust earlier supplies accordingly.
Specifications
Amplifier
Rated output power: 2 X 5
W/ THD 10%
Signal to noise ratio: 65dB
AUDIO-IN: Input sensitivity
500 mV RMS
Bluetooth
Standard: Bluetooth Standard
Version 2.1 + EDR
Frequency band: 2.402 ~
2.480 GHz ISM Band
Range: 10 m (free space)
General information
Power supply
AC/DC adapter
KSASB0241200150HU
Input: 100-240 V~ 50/60
Hz, 0.6 A
Output: 12 V DC, 1.5 A
7.4V, 1350 mAh Liion polymer internal
rechargeable battery
Charging
5V DC, 0.5 A for USB,
Maximum 0.7 A for power
adapter (power off)
Power consumption (AC
power)
Operation: 10 W
Temperature & Humidity
0°C to 45°C, 5% to 90%
Humidity for all climates
(Operation) -40 °C to 70
°C, 5% to 95% (Storage)
Dimensions
Main Unit (W x H x D):
176 x 88 x 70 mm
Weight
Main Unit: 0.95 kg
(sold separately)
Through an MP3 link cable, you can also
connect the speaker to an audio device,
such as an MP3 player.
Through Bluetooth, connect the SB5200 speaker with your Bluetooth
device, such as an iPad, iPhone, Android phone, or laptop.
To get more powerful sound, use the audio cable to hook two, three
or more SB5200 speakers together.
Switch on & Connect
LED
890
123-456-7
When there is an incoming call, music play pauses.
Press to switch on. Ready for
pairing: Blue light flashes.
If there is no action on SB5200
for 5 minutes, SB5200 switches
off automatically.
On your Bluetooth device,
activate Bluetooth and search
for SB5200.
Connected: Blue light is always on.
Next time you switch on SB5200, the
speaker connects to the last paired
device automatically.
To connect SB5200 to another Bluetooth device,
switch off Bluetooth on current Bluetooth device.
Pick up the phone call on your mobile phone. You
can talk through the microphone on SB5200. Music
play resumes when your phone call ends.
Play
To play music from multiple speakers, do
the following:
1. Use the audio cable to connect two
speakers, one plug in the OUT socket and
the other plug in the IN socket;
The music streaming may be
interrupted by obstacles between
the device and SB5200, such as
walls, or other devices nearby that
operate in the same frequency.
2. On the Bluetooth device, connect to a
speaker.
Sound mode
Sound mode
Reset Bluetooth
The first speaker works as the master one.
Select your sound options on the master
speaker.
LED
RESET
To play through the MP3 link cable,
switch off Bluetooth on the Bluetooth
device.
LED
Sound mode
Press the button repeatedly to
switch between the indoor and
outdoor sound effects.
Charge
AUDIO IN
AUDIO OUT
Reset Bluetooth
LED
LED
12V,
DC
1.5A
2 sec
Battery low: Flashing red light
Charging ongoing: Green light always on
Charging complete: Light off
Note: D
uring battery charging through the
USB connector, music play on SB5200
reduces to a low volume level.
SB5200 can remember three paired devices. The fourth
paired device will replace the first one. To clear the paired
devices from your speaker , press and hold the button until
the blue light flashes.
On the speaker, you enter the pairing mode. On the paired
device, 1. unpair SB5200; 2. search for and connect Philips
SB5200 again.
Maximum or minimum
volume level is reached.