EHI8550FOK
EN HOB
USER MANUAL
2
www.electrolux.com
CONTENTS
1. SAFETY INFORMATION............................................................................................ 3
2. SAFETY INSTRUCTIONS.......................................................................................... 4
3. PRODUCT DESCRIPTION.........................................................................................6
4. DAILY USE................................................................................................................ 8
5. HINTS AND TIPS.....................................................................................................11
6. CARE AND CLEANING........................................................................................... 13
7. TROUBLESHOOTING............................................................................................. 13
8. INSTALLATION....................................................................................................... 15
9. TECHNICAL INFORMATION....................................................................................17
WE’RE THINKING OF YOU
Thank you for purchasing an Electrolux appliance. You’ve chosen a product that brings
with it decades of professional experience and innovation. Ingenious and stylish, it has
been designed with you in mind. So whenever you use it, you can be safe in the
knowledge that you’ll get great results every time.
Welcome to Electrolux.
Visit our website for:
Get usage advice, brochures, trouble shooter, service information:
www.electrolux.com
Register your product for better service:
www.registerelectrolux.com
Buy Accessories, Consumables and Original spare parts for your appliance:
www.electrolux.com/shop
CUSTOMER CARE AND SERVICE
Always use original spare parts.
When contacting our Authorised Service Centre, ensure that you have the following
data available: Model, PNC, Serial Number.
The information can be found on the rating plate.
Warning / Caution-Safety information
General information and tips
Environmental information
Subject to change without notice.
ENGLISH
1.
3
SAFETY INFORMATION
Before the installation and use of the appliance, carefully
read the supplied instructions. The manufacturer is not
responsible if an incorrect installation and use causes
injuries and damages. Always keep the instructions with
the appliance for future reference.
1.1 Children and vulnerable people safety
•
•
•
•
•
•
•
This appliance can be used by children aged from 8
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience and
knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe
way and understand the hazards involved.
Do not let children play with the appliance.
Keep all packaging away from children.
Keep children and pets away from the appliance when it
operates or when it cools down. Accessible parts are
hot.
If the appliance has a child safety device, we
recommend you activate it.
Cleaning and user maintenance shall not be made by
children without supervision.
Children of less than 3 years should be kept away
unless continuously supervised.
1.2 General Safety
•
•
•
•
•
The appliance and its accessible parts become hot
during use. Do not touch the heating elements.
Do not operate the appliance by means of an external
timer or separate remote-control system.
Unattended cooking on a hob with fat or oil can be
dangerous and may result in fire.
Never try to extinguish a fire with water, but switch off
the appliance and then cover flame e.g. with a lid or a
fire blanket.
Do not store items on the cooking surfaces.
4
www.electrolux.com
•
•
•
•
•
Metallic objects such as knives, forks, spoons and lids
should not be placed on the hob surface since they can
get hot.
Do not use a steam cleaner to clean the appliance.
After use, switch off the hob element by its control and
do not rely on the pan detector.
If the glass ceramic surface/ glass surface is cracked,
switch off the appliance to avoid the possibility of
electric shock
If the supply cord is damaged, it must be replaced by
the manufacturer, an authorized Service or similarly
qualified persons in order to avoid a hazard.
2. SAFETY INSTRUCTIONS
2.1 Installation
WARNING!
Only a qualified person must
install this appliance.
• Remove all the packaging.
• Do not install or use a damaged
appliance.
• Obey the installation instruction
supplied with the appliance.
• Keep the minimum distance from the
other appliances and units.
• Always be careful when you move the
appliance because it is heavy. Always
wear safety gloves.
• Seal the cut surfaces with a sealant to
prevent moisture to cause swelling.
• Protect the bottom of the appliance
from steam and moisture.
• Do not install the appliance adjacent to
a door or under a window. This
prevents hot cookware to fall from the
appliance when the door or the
window is opened.
• If the appliance is installed above
drawers make sure that the space,
between the bottom of the appliance
and the upper drawer, is sufficient for
air circulation.
• The bottom of the appliance can get
hot. Make sure to install a noncombustile separation panel under the
appliance to prevent access to the
bottom.
• Make sure that the ventilation space of
2 mm, between the worktop and the
front of the below unit, is free. The
warranty does not cover damages
caused by the lack of an adequate
ventilation space.
2.2 Electrical Connection
WARNING!
Risk of fire and electrical
shock.
• All electrical connections should be
made by a qualified electrician.
• The appliance must be earthed.
• Before carrying out any operation make
sure that the appliance is disconnected
from the power supply.
• Make sure that the electrical
information on the rating plate agrees
with the power supply. If not contact
an electrician.
• Make sure the appliance is installed
correctly. Loose and incorrect
electricity mains cable or plug (if
applicable) can make the terminal
become too hot.
• Use the correct electricity mains cable.
• Do not let the electricity mains cable
tangle.
• Make sure that a shock protection is
installed.
ENGLISH
• Use the strain relief clamp on the cable.
• Make sure the mains cable or plug (if
applicable) does not touch the hot
appliance or hot cookware, when you
connect the appliance to the near
sockets
• Do not use multi-plug adapters and
extension cables.
• Make sure not to cause damage to the
mains plug (if applicable) or to the
mains cable. Contact an Authorised
Service Centre or an electrician to
change a damaged mains cable.
• The shock protection of live and
insulated parts must be fastened in
such a way that it cannot be removed
without tools.
• Connect the mains plug to the mains
socket only at the end of the
installation. Make sure that there is
access to the mains plug after the
installation.
• If the mains socket is loose, do not
connect the mains plug.
• Do not pull the mains cable to
disconnect the appliance. Always pull
the mains plug.
• Use only correct isolation devices: line
protecting cut-outs, fuses (screw type
fuses removed from the holder), earth
leakage trips and contactors.
• The electrical installation must have an
isolation device which lets you
disconnect the appliance from the
mains at all poles. The isolation device
must have a contact opening width of
minimum 3 mm.
2.3 Use
WARNING!
Risk of injury, burns and
electrical shock.
• Remove all the packaging, labelling
and protective film (if applicable) before
first use.
• Use this appliance in a household
environment.
• Do not change the specification of this
appliance.
• Make sure that the ventilation openings
are not blocked.
• Do not let the appliance stay
unattended during operation.
5
• Set the cooking zone to “off” after each
use.
• Do not rely on the pan detector.
• Do not put cutlery or saucepan lids on
the cooking zones. They can become
hot.
• Do not operate the appliance with wet
hands or when it has contact with
water.
• Do not use the appliance as a work
surface or as a storage surface.
• If the surface of the appliance is
cracked, disconnect immediately the
appliance from the power supply. This
to prevent an electrical shock.
• Users with a pacemaker must keep a
distance of minimum 30 cm from the
induction cooking zones when the
appliance is in operation.
• When you place food into hot oil, it
may splash.
WARNING!
Risk of fire and explosion
• Fats and oil when heated can release
flammable vapours. Keep flames or
heated objects away from fats and oils
when you cook with them.
• The vapours that very hot oil releases
can cause spontaneous combustion.
• Used oil, that can contain food
remnants, can cause fire at a lower
temperature than oil used for the first
time.
• Do not put flammable products or
items that are wet with flammable
products in, near or on the appliance.
WARNING!
Risk of damage to the
appliance.
• Do not keep hot cookware on the
control panel.
• Do not let cookware to boil dry.
• Be careful not to let objects or
cookware fall on the appliance. The
surface can be damaged.
• Do not activate the cooking zones with
empty cookware or without cookware.
• Do not put aluminium foil on the
appliance.
• Cookware made of cast iron,
aluminium or with a damaged bottom
can cause scratches on the glass /
glass ceramic. Always lift these objects
6
www.electrolux.com
up when you have to move them on
the cooking surface.
• This appliance is for cooking purposes
only. It must not be used for other
purposes, for example room heating.
• Clean the appliance with a moist soft
cloth. Only use neutral detergents. Do
not use abrasive products, abrasive
cleaning pads, solvents or metal
objects.
2.4 Care and cleaning
2.5 Disposal
• Clean regularly the appliance to
prevent the deterioration of the surface
material.
• Deactivate the appliance and let it cool
down before you clean it.
• Disconnect the appliance from the
electrical supply before maintenance.
• Do not use water spray and steam to
clean the appliance.
WARNING!
Risk of injury or suffocation.
• Contact your municipal authority for
information on how to discard the
appliance correctly.
• Disconnect the appliance from the
mains supply.
• Cut off the mains cable and discard it.
3. PRODUCT DESCRIPTION
3.1 Cooking surface layout
1
1
1 Induction cooking zone
2 Control panel
1
1
1
2
3.2 Control panel layout
1
2
11
3
4
5
10
6
9
8
7
Use the sensor fields to operate the appliance. The displays, indicators and sounds tell
which functions operate.
ENGLISH
Sensor
field
Function
Comment
1
ON / OFF
To activate and deactivate the hob.
2
Lock / The Child Safety
Device
To lock / unlock the control panel.
3
STOP+GO
To activate and deactivate the function.
4
5
-
Timer indicators of cook- To show for which zone you set the time.
ing zones
-
Timer display
To show the time in minutes.
Power function
To activate and deactivate the function.
6
7
-
Heat setting display
To show the heat setting.
8
-
Control bar
To set a heat setting.
9
/
-
To increase or decrease the time.
10
-
To select the cooking zone.
11
Bridge
To activate and deactivate the function.
3.3 Heat setting displays
Display
Description
The cooking zone is deactivated.
The cooking zone operates.
-
STOP+GO function operates.
Automatic Heat Up function operates.
Power function operates.
+ digit
There is a malfunction.
/
OptiHeat Control (3 step Residual heat indicator) : continue cooking / keep warm / residual heat.
/
Lock / The Child Safety Device function operates.
Not correct cookware or too small or no cookware on the cooking
zone.
Automatic Switch Off function operates.
7
8
www.electrolux.com
3.4 OptiHeat Control (3 step
Residual heat indicator)
WARNING!
/
/
There is a risk of
burns from residual heat. The
indicator shows the level of
the residual heat.
The induction cooking zones make the
heat necessary for cooking process
directly in the bottom of the cookware.
The glass ceramic is heated by the heat of
the cookware.
4. DAILY USE
WARNING!
Refer to Safety chapters.
4.1 Activating and deactivating
Touch
for 1 second to activate or
deactivate the hob.
4.3 The heat setting
To set or change the heat setting:
Touch the control bar at the correct heat
setting or move your finger along the
control bar until you reach the correct heat
setting.
4.2 Automatic Switch Off
The function deactivates the hob
automatically if:
• All cooking zones are deactivated.
• You do not set the heat setting after
you activate the hob.
• You spill something or put something
on the control panel for more than 10
seconds, (a pan, a cloth, etc.). An
acoustic signal sounds and the hob
deactivates. Remove the object or
clean the control panel.
• The hob gets too hot (e.g. when, a
saucepan boils dry). Let the cooking
zone cool down before you use the
hob again.
• You use incorrect cookware. The
symbol
comes on and the cooking
zone deactivates automatically after 2
minutes.
• You do not deactivate a cooking zone
or change the heat setting. After some
time
comes on and the hob
deactivates. See below.
The relation between heat setting and
times of the function:
•
, 1 — 3 — 6 hours
• 4 — 7 — 5 hours
• 8 — 9 — 4 hours
• 10 — 14 — 1.5 hours
4.4 Cooking zone indication
min.
The horizontal line shows the size of the
cooking zone and the minimum cookware
diameter.
Refer to “Technical information” chapter.
4.5 Using the cooking zones
Put the cookware on the cross / square
which is on the surface that you cook.
Cover the cross / square fully. Induction
cooking zones adapt to the dimension of
the bottom of the cookware automatically.
You can cook with the large cookware on
two cooking zones at the same time.
ENGLISH
4.6 Bridge function
4.9 Timer
This function connects two left side
cooking zones and they operate as one.
Count Down Timer
You can use this function to set how long
the cooking zone operates for only this
one time.
First set the heat setting for one of the left
side cooking zones.
To activate the function: touch . To
set or change the heat setting touch one
of the control sensors.
To deactivate the function: touch .
The cooking zones operate independently.
When you use only one cooking zone of
the pair we recommend that you use the
rear cooking zone. Also when you use
large cookware we recommend that you
put it near to the rear cooking zone.
9
First set the cooking zone then set the
function. You can set the heat setting
before or after you set the function.
To set the cooking zone: touch
again and again until the indicator of a
necessary cooking zone comes on.
of
To activate the function: touch
the timer to set the time (00 - 99 minutes).
When the indicator of the cooking zone
starts to flash slowly the time counts
down.
4.7 Automatic Heat Up
To see the remaining time: set the
If you activate this function you can get a
necessary heat setting in a shorter time.
The function sets the highest heat setting
for some time and then decreases to the
correct heat setting.
cooking zone with . The indicator of the
cooking zone starts to flash quickly. The
display shows the remaining time.
To activate the function the
cooking zone must be cold.
To activate the function for a cooking
zone: touch
( comes on).
Immediately touch the correct heat
setting. After 3 seconds
comes on.
To deactivate the function: change the
heat setting.
4.8 Power function
This function makes more power available
to the induction cooking zones. The
function can be activated for the induction
cooking zone only for a limited period of
time. After this time the induction cooking
zone automatically sets back to the
highest heat setting.
Refer to “Technical
information” chapter.
To activate the function for a cooking
zone: touch
.
comes on.
To deactivate the function: change the
heat setting.
To change the time: set the cooking
zone with
. Touch
or
.
To deactivate the function: set the
and touch . The
cooking zone with
remaining time counts back to 00. The
indicator of the cooking zone goes out. To
deactivate the function you can also touch
and
at the same time.
When the time comes to an
end, the sound operates and
00 flashes. The cooking zone
deactivates.
To stop the sound: touch
.
CountUp Timer (The count up timer)
You can use this function to monitor how
long the cooking zone operates.
To set the cooking zone: touch
again and again until the indicator of a
necessary cooking zone comes on.
To activate the function: touch
of
the timer.
comes on. When the
indicator of the cooking zone starts to
flash slowly the time counts up. The
display switches between
time (minutes).
and counted
10
www.electrolux.com
To see how long the cooking zone
operates: set the cooking zone with .
The indicator of the cooking zone starts to
flash quickly. The display shows how long
the zone operates.
To deactivate the function: set the
and touch
or
cooking zone with
The indicator of the cooking zone goes
out.
.
).
To activate the function: touch
.
. Do not set the heat setting.
for 4 seconds.
Deactivate the hob with
comes on.
.
To deactivate the function: activate the
Touch
. Do not set the heat setting.
for 4 seconds.
Deactivate the hob with
comes on.
.
To override the function for only one
deactivate the hob with
operates again.
4.10 STOP+GO
This function sets all cooking zones that
operate to the lowest heat setting.
When the function operates, you cannot
change the heat setting.
The function does not stop the timer
functions.
the function
4.13 OffSound Control
(Deactivation and activation of
the sounds)
Deactivate the hob. Touch
for 3
seconds. The display comes on and goes
out. Touch
.
To deactivate the function: touch
The previous heat setting comes on.
.
comes on. Touch
for 4 seconds.
Set the heat setting in 10 seconds.
You can operate the hob. When you
The function has no effect on
the operation of the cooking
zones.
for 3 seconds.
or
comes on. Touch
of the timer to
choose one of the following:
.
4.11 Lock
You can lock the control panel while
cooking zones operate. It prevents an
accidental change of the heat setting.
•
- the sounds are off
- the sounds are on
•
To confirm your selection wait until the
hob deactivates automatically.
When the function is set to
hear the sounds only when:
Set the heat setting first.
To activate the function: touch .
comes on for 4 seconds.The Timer stays
on.
To deactivate the function: touch
The previous heat setting comes on.
hob with
Touch
cooking time: activate the hob with
.
To activate the function: touch
comes on.
This function prevents an accidental
operation of the hob.
hob with
or
of the timer to set the
Touch
time. When the time comes to an end, the
sound operates and 00 flashes.
To stop the sound: touch
4.12 The Child Safety Device
To activate the function: activate the
Minute Minder
You can use this function as a Minute
Minder when the hob is activated and the
cooking zones do not operate (the heat
setting display shows
When you deactivate the
hob, you also deactivate this
function.
.
•
•
•
•
you can
you touch
Minute Minder comes down
Count Down Timer comes down
you put something on the control
panel.
ENGLISH
4.14 Power management
function
11
• The heat setting display of the reduced
zones changes between two levels.
• Cooking zones are grouped according
to the location and number of the
phases in the hob (see illustration).
• Each phase has a maximum electricity
loading of 3700 W.
• The function divides the power
between cooking zones connected to
the same phase.
• The function activates when the total
electricity loading of the cooking zones
connected to a single phase exceeds
3700 W.
• The function decreases the power to
the other cooking zones connected to
the same phase.
5. HINTS AND TIPS
WARNING!
Refer to Safety chapters.
5.1 Cookware
For induction cooking zones
a strong electro-magnetic
field creates the heat in the
cookware very quickly.
Use the induction cooking
zones with correct cookware.
Cookware material
• correct: cast iron, steel, enamelled
steel, stainless steel, the bottom made
of multi-layer (with correct mark from a
manufacturer).
• not correct: aluminium, copper,
brass, glass, ceramic, porcelain.
Cookware is correct for an induction
hob if:
• some water boils very quickly on a
zone set to the highest heat setting.
• a magnet pulls on to the bottom of the
cookware.
The bottom of the cookware
must be as thick and flat as
possible.
Cookware dimensions
Induction cooking zones adapt to the
dimension of the bottom of the cookware
automatically to some limit.
The cooking zone efficiency is related to
the diameter of the cookware. The
cookware with a smaller diameter than the
minimum receives only a part of the power
generated by the cooking zone.
Refer to “Technical
information” chapter.
5.2 The noises during operation
If you can hear:
• crack noise: cookware is made of
different materials (sandwich
construction).
• whistle sound: you use one or more
cooking zones with high power levels
and the cookware is made of different
materials (sandwich construction).
• humming: you use high power levels.
• clicking: electric switching occurs.
• hissing, buzzing: the fan operates.
The noises are normal and do not
refer to hob malfunction.
5.3 Energy saving
• If it is possible, always put the lids on
the cookware.
• Put cookware on a cooking zone
before you start it.
12
www.electrolux.com
• Use the residual heat to keep the food
warm or to melt it.
5.4 Öko Timer (Eco Timer)
To save energy, the heater of the cooking
zone deactivates before the count down
timer sounds. The difference in the
operation time depends on the heat
setting level and the length of the cooking
operation.
not linear. When you increase the heat
setting it is not proportional to the increase
of the cooking zone consumption of
power. It means that the cooking zone
with the medium heat setting uses less
than a half of its power.
The data in the table is for
guidance only.
5.5 Examples of cooking
applications
The relation between the heat setting and
the cooking zone consumption of power is
Heat setting
Use to:
Time
Hints
Keep cooked food warm
as necessary
Put a lid on the cookware
1-3
Hollandaise sauce, melt: butter, chocolate, gelatine
5 - 25
min
Mix from time to time
1-3
Solidify: fluffy omelettes,
baked eggs
10 - 40
min
Cook with a lid on
3-5
Simmer rice and milkbased
dishes, heating up readycooked meals
25 - 50
min
Add the minimum twice as
much liquid as rice, mix milk
dishes part procedure
through
5-7
Steam vegetables, fish, meat
20 - 45
min
Add some tablespoons of liquid
7-9
Steam potatoes
20 - 60
min
Use max. ¼ l water for 750 g
of potatoes
7-9
Cook larger quantities of food, 60 Up to 3 l liquid plus ingredistews and soups
150 min ents
9 - 12
Gentle fry: escalope, veal cor- as necdon bleu, cutlets, rissoles,
essary
sausages, liver, roux, eggs,
pancakes, doughnuts
Turn halfway through
12 - 13
Heavy fry, hash browns, loin
steaks, steaks
Turn halfway through
14
Boil water, cook pasta, sear meat (goulash, pot roast), deep-fry chips
-1
5 - 15
min
Boil large quantities of water. Power function is activated
ENGLISH
13
6. CARE AND CLEANING
WARNING!
Refer to Safety chapters.
6.1 General information
• Clean the hob after each use.
• Always use cookware with clean
bottom.
• Scratches or dark stains on the surface
have no effect on how the hob
operates.
• Use a special scraper for the glass.
• Use a special cleaner applicable for the
surface of the hob.
the dirt can cause damage to the hob.
Put the special scraper on the glass
surface at an acute angle and move
the blade on the surface.
• Remove when the hob is
sufficiently cool: limescale rings,
water rings, fat stains, shiny metallic
discoloration. Clean the hob with a
moist cloth and some detergent. After
cleaning, rub the hob dry with a soft
cloth.
6.2 Cleaning of the hob
• Remove immediately: melted plastic,
plastic foil, and food with sugar. If not,
7. TROUBLESHOOTING
WARNING!
Refer to Safety chapters.
7.1 What to do if...
Problem
Possible cause
Remedy
You cannot activate or operate the hob.
The hob is not connected
to an electrical supply or it
is connected incorrectly.
Check if the hob is correctly
connected to the electrical
supply. Refer to the connection diagram.
The fuse is released.
Make sure that the fuse is
the cause of the malfunction. If the fuse releases
again and again, contact a
qualified electrician.
Activate the hob again and
set the heat setting in less
than 10 seconds.
You touched 2 or more
sensor fields at the same
time.
Touch only one sensor field.
STOP+GO function operates.
Refer to "Daily use" chapter.
14
www.electrolux.com
Problem
Possible cause
Remedy
There is water or fat stains
on the control panel.
Clean the control panel.
An acoustic signal sounds
and the hob deactivates.
An acoustic signal sounds
when the hob is deactivated.
You put something on one
or more sensor fields.
Remove the object from the
sensor fields.
The hob deactivates.
You put something on the
Remove the object from the
sensor field.
sensor field
Residual heat indicator
does not come on.
.
The zone is not hot because it operated only for a
short time.
Automatic Heat Up function The zone is hot.
does not operate.
If the zone operated sufficiently long to be hot,
speak to an Authorised
Service Centre.
Let the zone become sufficiently cool.
The highest heat setting is
set.
The highest heat setting has
the same power as the
function.
The heat setting changes
between two levels.
Power management function is activated.
Refer to "Daily use" chapter.
The sensor fields become
hot.
The cookware is too large
or you put it too near to the
controls.
Put large cookware on the
rear zones if possible.
There is no signal when you The signals are deactivated. Activate the signals.
touch the panel sensor
Refer to "Daily use" chapter.
fields.
comes on.
Automatic Switch Off operates.
Deactivate the hob and activate it again.
comes on.
The Child Safety Device or
the Lock function operates.
Refer to "Daily use" chapter.
comes on.
There is no cookware on
the zone.
Put cookware on the zone.
The cookware is incorrect.
Use the correct cookware.
Refer to “Helpful hints and
tips” chapter.
The diameter of the bottom Use cookware with correct
of the cookware is too small dimensions.
for the zone.
Refer to “Technical information” chapter.
The cookware does not
cover the cross / square.
Cover the cross / square
fully.
ENGLISH
Problem
Possible cause
15
Remedy
and a number come on. There is an error in the hob. Disconnect the hob from
the electrical supply for
some time. Disconnect the
fuse from the electrical system of the house. Connect
it again. If
comes on
again, speak to an Authorised Service Centre.
comes on.
There is an error in the hob
because a cookware boils
dry. Automatic Switch Off
and the overheating protection for the zones operate.
7.2 If you cannot find a
solution...
If you cannot find a solution to the
problem yourself, contact your dealer or
an Authorised Service Centre. Give the
data from the rating plate. Give also three
digit letter code for the glass ceramic (it is
in the corner of the glass surface) and an
Deactivate the hob. Remove the hot cookware. After approximately 30 seconds, activate the zone
again. If the cookware was
the problem, the error message goes out. Residual
heat indicator can stay on.
Let the cookware become
sufficiently cool. Check if
your cookware is compatible with the hob.
Refer to “Helpful hints and
tips” chapter.
error message that comes on. Make sure,
you operated the hob correctly. If not the
servicing by a service technician or dealer
will not be free of charge, also during the
warranty period. The instructions about
the Service Centre and conditions of
guarantee are in the guarantee booklet.
8. INSTALLATION
WARNING!
Refer to Safety chapters.
8.1 Before the installation
Before you install the hob, write down the
information bellow from the rating plate.
The rating plate is on the bottom of the
hob.
Serial number ...........................
8.2 Built-in hobs
Only use the built-in hobs after you
assemble the hob into correct built-in units
and work surfaces that align to the
standards.
8.3 Connection cable
• Use the correct mains cable of type
H05BB-F Tmax 90°C (or higher) for a
single phase or two phase connection.
• Replace the damaged mains cable with
a special cable (type H05BB-F Tmax
90°C; or higher). Speak to your local
Service Centre.
16
www.electrolux.com
8.4 Assembly
min.
500mm
min.
50mm
min.
2mm
A
min. 2 mm
B
< 20 mm
A
min. 2 mm
B
> 20 mm
min. 500 mm
B
A
12 mm 57 mm
28 mm 41 mm
38 mm 31 mm
min
30 mm
min. 500 mm
B
A
12 mm 57 mm
28 mm 41 mm
38 mm 31 mm
min.
38 mm
min.
2 mm
R 5mm
min.
55mm
+1
490+1mm 750 mm
ENGLISH
17
min.
12 mm
min.
2 mm
9. TECHNICAL INFORMATION
9.1 Rating plate
Modell EHI8550FOK
Typ 58 GBD CF AU
Induction 7.4
Ser.Nr. .................
ELECTROLUX
PNC 949 596 287 00
220 - 240 V 50 - 60 Hz
Made in Germany
7.4
9.2 Cooking zones specification
Cooking zone
Nominal pow- Power funcer (maximum tion [W]
heat setting)
[W]
Power funcCookware dition maximum ameter [mm]
duration [min]
Left front
2300
3200
10
125 - 210
Left rear
2300
3200
10
125 - 210
Middle rear
2300
3200
10
125 - 210
Right front
1400
2500
4
125 - 145
Right rear
1800
2800
10
145 - 180
The power of the cooking zones can be
different in some small range from the
data in the table. It changes with the
material and dimensions of the cookware.
For optimal cooking results use cookware
not larger than the diameter in the table.
10. ENVIRONMENTAL CONCERNS
Recycle the materials with the symbol .
Put the packaging in applicable containers
to recycle it. Help protect the environment
and human health and to recycle waste of
electrical and electronic appliances. Do
not dispose appliances marked with the
18
www.electrolux.com
symbol with the household waste.
Return the product to your local recycling
facility or contact your municipal office.
*
ENGLISH
19
892965573-A-492013
www.electrolux.com/shop