MDA Designs Sirius 1200 Manual
Add to my manuals9 Pages
MDA Designs SIRIUS 1200 is a stylish and functional TV cabinet that offers ample storage space for your entertainment components. It features two glass doors that allow you to easily access your devices while keeping them protected from dust and scratches. The cabinet also includes a glass shelf that can be adjusted to accommodate items of various heights. With its sleek design and practical features, the MDA Designs SIRIUS 1200 is a great choice for any home entertainment system.
advertisement
Assembly Instructions
AISIRIUSMDA1
CAUTION
There are many small components used in the construction of this unit.
These should be kept away from young children during assembly
Care and Safety Notes
- Do not use fixings other than those supplied.
- Do not place very hot or very cold items against or in close proximity to any glass surface, unless
--adequately thick mats are used to prevent such items from coming into contact with the glass.
- Do not use the glass as a chopping surface. Do not strike glass with hard or pointed items.
- When cleaning glass panels, use a damp cloth or leather with washing up liquid or soft soap in
--necessary; do not use washing powders or any other substance containing abrasives since these can
--scratch glass.
- Do not sit or stand on glass surfaces.
- Do not use solvent or abrasive cleaners for cleaning; Use a damp cloth when cleaning.
- Only use genuine replacement parts
- Do not over tighten screws or use power tools to assemble.
ISSUE A
Parts List
1
2
3
4
5
6
A
B
C
D
E
F
G
Base Panel x 1
7
Top Panel x 1
8
Top Glass Panel x 1
9
Glass Shelf x 1
10
Plastic Side Panel x 2
11
Left Hand Glass Door x 1
Walnut Front Profile x 2
Oak Front Profile x 2
Inner Side Panel x 3
Centre Support Bar x 1
Right Hand Glass Door x 1
Fixings Identification
Screw (40mm) x 12
H
Steel Dowel x 4 I
Steel Cam x 4
J
Double Mag Catch x 1
Screw (M3 x12mm) x 4
Foot x 4
K
L
M
N
Door Hinge Plate x 4
O
Grub Screw x 8
Shelf Clamp x 3
Shelf Clamp Screw x 3
M5 Screw x 3
M6 Bolt (30mm) x 1
Screwdriver x1
4mm Allen Key x1
Centre Foot x1
1
Stage
1
A x6
F x4
10
1
10
Stage
2
2 E x4
D
10
2
Stage
3 A x6
2
3
Stage
4
This TV cabinet is supplied with both
Walnut (8) & Oak (9) finish front profiles.
Please select your desired profile before commencing Stage 4.
B x2
8 or
9 x2
Stage
5
Ensure Cam locks are fully tightened by turning clockwise
C x4
8 or
9
Stage
6
I x3
K x3
Select the shelf position that best suits your equipment before fixing shelf clamps (I) in position
8 or
9
4
Stage
7
Stage
8
L
4
J
Secure the shelf in place with shelf clamp screws (J)
5
O
11
Stage
9
Front left hand view
G x2
7
H x4
Front right hand view
G x2
H x4
6
6
G x2
Stage
10 a b
5
Remove protective film from plastic side panels
H x4
5 locate edge of plastic side panel (5) into groove on front profile (8 or 9)
Stage
11
3
Stage
12
This TV cabinet features BEAMTHRU glass which allows remote control operation of equipment inside the cabinet with the doors closed. However, if you have a peice of equipment with a poor remote signal (some SKY receivers suffer from this), please position the particular unit on the glass shelf in the middle position. This will then place the unit behind the unprinted window on the glass doors to allow full function of your remote signal.
Poor signal unit situated behind unprinted window on glass doors
Shelf in middle position
7
Stage
13
An extension socked can be fixed to the rear panel to keep all plugs & cables out of view
(extension socket & fixings not supplied)
8
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project