D-Link Module SNMP management f DMC-1000

Media Converters & Chassis
Media Converters with Individual Metal
Case Housing.
DMC-615SC
DMC-1000 Chassis
DMC-1002
Management Module
Chassis-based Media Converters
System Overview
The Chassis-based Media Converters include a number of
independent media converters and a chassis capable of housing up
to 16 media converters. You can start with single media
converters, each equipped with its own housing and AC power
adapter. When your requirements grow big, you can mount a chassis
in your equipment rack and install your media converters in the
chassis. The housing of each media converter can be easily
removed, and the media converter PC board can be slid into the
chassis.
Chassis & Power Supply
The chassis lets you install multiple media converters in an
equipment rack together with the network devices for which they
provide media conversion. This provides for space saving,
and the cabling will look neat. The chassis comes with its own
universal AC to DC power supply. For maximum power availability,
an optional redundant power supply is available for installation in
chassis.
Management Option
You can select to configure your chassis with or without
management functions. If you configure it with management, a
management module is available for installation in the
chassis. It lets you monitor in real-time the status of all media
converters and power supplies in the chassis, it also sends out
alarms to alert you of all abnormal situations. Management follows
Chassis Features
16 bays to house up to 16 media converters
Front panel LEDs for bay and fan power status
Standard 19-inch rack-mountable with, 2U height
Non-stop operation & minimal downtime
Allows hot-swapping of media converters
Hot swappable redundant power supplies
industry standards, including SNMP and http, allowing you to
monitor and manage from a third-party SNMP management
workstation or via a web browser.
Media Conversion Solutions
The following media conversion solutions are available:
- Fast Ethernet twisted-pair to Fast Ethernet 100BASE-FX
fiber (single-mode and multi-mode)
- Fast Ethernet 100BASE-FX fiber multi-mode to single-mode
- 1000BASE-T Gigabit twisted pair to 1000BASE-SX and
1000BASE-LX Gigabit fiber
For fiber cables, MT-RJ and SC types of connectors are supported.
Media Converters Stand-alone or Installed in Chassis
The media converters convert signals capable of transmission on
one type of cable to signals capable of transmission on another type
of cable. This allows you to connect longer distance fiber cables
between devices that are designed only for shorter distance cables,
such as the Cat. 5 twisted-pair cable.
All media converters in this system come with their own solid metal
case housing, LED status indicators and AC to DC power adapters.
They can be used as stand-alone converters, or installed in the
chassis. If you install them in the chassis, you will remove
their metal cases and slide in their PC boards into the chassis slots.
The chassis's power supply will be used instead of the media
converters' own AC to DC power adapters. All media converters
are hot-swappable when used with the chassis.
Cooling fans on back side (together with power supplies)
1 universal internal AC to DC power supply provided
SNMP and web-based management capabilities (optional)
Second AC to DC power supply for load-sharing purpose
(optional)
Media converter power isolation for electrical isolation
from each bay
Page 1
Media Converters & Chassis
DMC-1000 Chassis
DMC-300M, DMC-300SC Media
Converters
LED indicators
- Power LED - Fan LED
These converters convert 10/100Mbps 10BASE-T/
100BASE-TX Fast Ethernet twisted-pair signals to
100BASE-FX Fast Ethernet multi-mode fiber signals.
Maximum fiber cable distance is 2km. 1 RJ-45 twisted-pair port
and 1 fiber port are provided.
Housing Dimensions
415 x 390 x 89 mm
AC input
- 100-240 VAC, 50/60Hz
- Internal universal power supply
- DMC-300M: the fiber port on this media converter is the
MT-RJ connector.
- DMC-300SC: the fiber port on this media converter is
the SC connector.
Operation Temperature
0 - 40 C
Media Converter Features
Storage Temperature
-10 - 50 C
Ordering Information
- One-channel media conversion between 10BASE-T/
100BASE-TX and 100BASE-FX
- Fiber MT-RJ or SC connector
- Auto negotiation of speeds and duplex modes on
twisted-pair port
- Auto MDI-II and MDI-X
- One slide switch for configuring fixed half/full duplex
modes
- Store-and-forward mechanism
- Back-pressure & IEEE 802.3x Flow Control compliant
- Full wire-speed forwarding rate
- Front panel status LEDs
- Can be used as a stand-alone device or with chassis
- Hot-swappable when used with chassis
Chassis-based Media Converter
DMC-1000
Media Converter Chassis
Technical Specifications
Operation Humidity
10% - 90%
Storage Humidity
5% - 90%
Emission (EMI)
- FCC class A
- VCCI class A
- CE Class A
LED Indicators
- Power
- 100Mbps Speed (for twisted-pair port)
- Full Duplex/Collision (for twisted-pair and fiber ports)
- LINK/ACT (for twisted-pair port)
Optional Media Converter Modules
DMC-300M
Fast Ethernet Twisted-pair to Fast Ethernet
Multi-mode Fiber (2km, MT-RJ) Media
Converter Module
DMC-300SC
Fast Ethernet Twisted-pair to Fast Ethernet
Multi-mode Fiber (2km, SC) Media Converter
Module
DMC-515SC
Fast Ethernet Twisted-pair to Fast Ethernet
Single-mode Fiber (15km, SC) Media
Converter Module
DMC-530SC
Fast Ethernet Twisted-pair to Fast Ethernet
Single-mode Fiber (30km, SC) Media
Converter Module
DMC-560SC
Fast Ethernet Twisted-pair to Fast Ethernet
Single-mode Fiber (60km, SC) Media
Converter Module
DMC-615SC
Fast Ethernet Multi-mode Fiber (2km SC) to
Fast Ethernet Single-mode Fiber (15km, SC)
Media Converter Module
DMC-700SC
1000BASE-T Gigabit Twisted-pair to
1000BASE-SX Gigabit Fiber Multi-mode Fiber
(550m, SC) Media Converter Module
DMC-810SC
1000BASE-T Gigabit Twisted-pair to
1000BASE-LX Gigabit Fiber Single-mode
Fiber (10km, SC) Media Converter Module
Dimensions
120 x 88 x 25 mm
Power Input
- 7.5V 1.5A
- Through external AC power adapter
Operation Temperature
0 - 40 C
Storage Temperature
-25 - 70 C
Humidity
10 ~ 90% non-condensing
Emission (EMI) - FCC Class B
- VCCI Class B
- CE Class B
- C-Tick
Optional Management Module
DMC-1002
Management Module
Optional Redundant Power Supply
DMC-1001
Redundant Power Supply
Page 2
Media Converters & Chassis
DMC-515SC, DMC-530SC,
DMC-560SC Media Converters
DMC-615SC Media Converter
This converter converts 100BASE-FX Fast Ethernet multi-mode
fiber signals to 100BASE-FX Fast Ethernet single-mode fiber
signals. Maximum fiber cable distance is 15km. 2 fiber ports
(SC connectors) are provided.
These converters convert 10/100Mbps 10BASE-T/100BASETX Fast Ethernet twisted-pair signals to 100BASE-FX Fast
Ethernet single-mode fiber signals. Maximum fiber cable
distance is 15 - 60 km. 1 RJ-45 twisted-pair port and 1 fiber
port (SC connector) are provided.
Media Converter Features
- One-channel media conversion between 100BASE-FX
multi-mode to 100BASE-FX single-mode fiber
- 2 fiber SC connectors
- Store-and-forward mechanism
- Full wire-speed forwarding rate
- Front panel status LEDs
- Can be used as a stand-alone device or with chassis
- Hot-swappable when used with chassis
- DMC-515SC: this media converter supports maximum
15km fiber cable distance.
- DMC-530SC: this media converter supports maximum
30km fiber cable distance.
- DMC-560SC: this media converter supports maximum
60km fiber cable distance.
Media Converter Features
Technical Specifications
One-channel media conversion between 10BASET/100BASE-TX and 100BASE-FX
Fiber SC connector
Auto negotiation of speeds and duplex modes on
twisted-pair port
Auto MDI-II and MDI-X
One slide switch for configuring fixed half/full duplex
modes
Store-and-forward mechanism
Back-pressure & IEEE 802.3x Flow Control compliant
Full wire-speed forwarding rate
Front panel status LEDs
Can be used as a stand-alone device or with chassis
Hot-swappable when used with chassis
LED Indicators
- Power
- LINK-1
- LINK-2
Dimensions
120 x 88 x 25 mm
Power Input
- 7.5V 1.5A
- Through external AC power adapter
Operation Temperature
0 - 40 C
Technical Specifications
Storage Temperature
-25 - 70 C
LED Indicators
- Power
- 100Mbps Speed (for twisted-pair port)
- Full Duplex/Collision (for twisted-pair and fiber ports)
- LINK/ACT (for twisted-pair port)
Humidity
10 ~ 90% non-condensing
Emission (EMI)
- FCC Class B
- VCCI Class B
- CE Class B
- C-Tick
Dimensions
120 x 88 x 25 mm
Power Input
- 7.5V 1.5A
- Through external AC power adapter
Operation Temperature
0 - 40 C
Storage Temperature
-25 - 70 C
Humidity
10 ~ 90% non-condensing
Emission (EMI)
- FCC Class B
- VCCI Class B
- CE Class B
- C-Tick
Page 3
Media Converters & Chassis
DMC-700SC, DMC-810SC Media
Converters
DMC-700SC Media Converter: This converter converts
1000BASE-T Gigabit twisted-pair signals to 1000BASE-SX
Gigabit multi-mode fiber signals. Maximum fiber cable
distance is 550m. 1 RJ-45 twisted-pair port and 1 fiber port
(SC type connector) are provided.
DMC-810SC Media Converter: This converter converts
1000BASE-T Gigabit twisted-pair signals to 1000BASE-LX
Gigabit single-mode fiber signals. Maximum fiber cable
distance is 10km. 1 RJ-45 port and 1 fiber port (SC type
connector) are provided.
Media Converter Features
One-channel media conversion between 1000BASE-T and
1000BASE-SX/LX
Auto negotiation of duplex mode on twisted-pair port
Auto MDI-II/MDI-X for twisted-pair port
Full wire-speed forwarding rate
Front panel status LEDs
Can be used as a stand-alone device or with chassis
Hot-swappable when used with chassis
Link Pass Through function
Technical Specifications
LED Indicators
- Power (PWR)
- LINK/ACT
Dimensions
- 120 x 88 x 25 mm
Power Input
- 7.5V 1.5A
- Through external AC power adapter
Operating Temperature
0 - 40 C
Storage Temperature
-25 - 70 C
Humidity
10 ~ 90% non-condensing
Emission (EMI)
- FCC Class B
- VCCI Class B
- CE Class B
- C-Tick
Page 4
Media Converters & Chassis
DMC-1002 Management Module
This module provides SNMP-based and web-based
management of all media converter and power supply
modules installed in the DMC-1000 chassis. It features a 32bit, high performance RISC microprocessor executing a
real-time operating system. It provides a 10/100Mbps Fast
Ethernet port for network connection, allowing you to
configure and monitor the system through an SNMP
management station or from a PC running an Internet
browser. An RS-232 port is also provided to let you connect
to a console (PC) to set configuration.
The management module periodically polls all converters
and power supplies in the chassis to collect information
regarding status and configuration settings. It also receives
traps for events such as module hot-swaps and power
failures as soon as they occur, as well as warning traps,
upon which alarms may be sounded out to alert you.
Management Module Features
- SNMP and web-based standards
- 10/100Mbps Fast Ethernet port & RS-232 console port
- Real-time display of link, speed, duplex status of media
converters
- Menu-driven terminal program provided for managment
via console port or Telnet
- Built-in SNMP v.1 agent with MIB-II and enterprise MIBs
- Supported traps: cold start, warm start, authentication fail,
power fail, fan fail, module insertion, module pullout, port
link down and port link up
- Supports factory reset and remote software reboot
- Supports redundant backup of media converters
- Supports remote setting of configurations of Smart Media
Converter modules, like LLCF enable, LLR enable, port
enable, auto-negotiation enable
- Password protection against unauthorized access
- Configuration setting upload/download through TFTP and
the web
- Firmware upgrade through TFTP and the web
Technical Specifications
Management Information & Functions Supported
Chassis
- Part Number
- Revision
- Description
- Chassis Reset
- Power status
- Authentication Failure
- Power Supply On/Off
- Power Supply Inserted
- Power Supply Removed
- Module Insertion
- Module Removal
- Module Unknown
- Module Failure
Active Control
- Link Loss Carry Forward
- Link Loss Return
- Module Name
- IP address
- Reset Module
- Redundant Backup
- Download software via tftp / http
- Subnet Mask
- Default Gateway
- Telnet to Console Commands
Protocols Supported
- IP
- UDP
- SNMP
- TCP
- TFTP
- ARP
- ICMP
- HTTP
Physical & Environmental
LED Indicators
- Power 1, 2
- Power Fail 1, 2
- Fan Fail 1, 2 - MGM
- Console
- Link/Activity
Dimensions
120 x 88 x 25 mm
Operation Temperature
0 - 40 C
Storage Temperature
-25 - 70 C
Operation Humidity
10% - 90%
Media Converter Modules
- Link Status
- Converter Type
- Slot Occupied
- Part Number
- Revision
Storage Humidity
5% - 90%
Emission (EMI)
- FCC Class B
- CE Mark Class B
- VCCI Class B
Alarms
- Cold Start
- Warm Start
- Link Up
- Link Down
Page 5