Kingston Technology HyperX Memory HyperX 512MB 800MHz DDR2 CL5 Datasheet

Add to my manuals
2 Pages

advertisement

Kingston Technology HyperX Memory HyperX 512MB 800MHz DDR2 CL5 Datasheet | Manualzz
Memory Module Specification
T E C H N O L O G Y
KHX6400D2/512
DESCRIPTION:
512MB 64M x 64-Bit PC2-6400
CL5 240-Pin DIMM
This document describes Kingston's 64M x 64-bit (512MB) DDR2-800 CL5 SDRAM (Synchronous
DRAM) memory module, based on eight 64M x 8-bit DDR2 FBGA components. This module has
been tested to run at DDR2 800MHz at low latency timing of 5-5-5-15 at 1.95V. The SPD is
programmed to JEDEC standard latency 667Mhz timing of 5-5-5-15 at 1.8V. This 240-pin DIMM
uses gold contact fingers and requires +1.8V. The electrical and mechanical specifications are as
follows:
FEATURES:
Power supply : Vdd: 1.8V ± 0.1V, Vddq: 1.8V ± 0.1V
Double-data-rate architecture; two data transfers per clock cycle
Bidirectional data strobe(DQS)
Differential clock inputs(CK and CK)
DLL aligns DQ and DQS transition with CK transition
Programmable Read latency 5 (clock)
Burst Length: 4, 8 (Interleave/nibble sequential)
Programmable Burst type (sequential & interleave)
Timing Reference: 5-5-5-15 at +1.8V / 5-5-5-15 at +1.95V
Edge aligned data output, center aligned data input
Auto & Self refresh, 7.8us refresh interval (8K/64ms refresh)
Serial presence detect with EEPROM
High Performance Heat Spreader
PCB : Height 1.180” (30.00mm), single sided component
PERFORMANCE:
Clock Cycle Time (tCK) CL=5
Row Cycle Time (tRC)
Refresh to Active/Refresh Command Time (tRFC)
Row Active Time (tRAS)
Single Power Supply of
Power
UL Rating
Operating Temperature
Storage Temperature
KE
Document No. 4804263-001.B00
YE
3ns (min.) / 8ns (max.)
54ns (min.)
105ns
39ns (min.) / 70,000ns (max.)
+1.8V (+/- .1V)
1.622 W (operating)
94 V - 0
0o C to 55o C
-55o C to +125o C
D
09/13/05
Page 1
Kingston Technology
MODULE DIMENSIONS:
Units: millimeters
2.7
1.270 ± 0.10
4.00
4.00
3.00
2.50±0.20
5.00
0.80±0.05
3.80
2.50
1.50±0.10
0.20
1.00
4.00
For more information, go to www.kingston.com
All Kingston products are tested to meet our published specifications. Some motherboards or system configurations may not
operate at the published HyperX memory speeds and timing settings. Kingston does not recommend that any user attempt to
run their computers faster than the published speed. Overclocking or modifying your system timing may result in damage to
computer components.
Document No. 4804263-001.B00
Page 2

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement