Samsung 16:9 HD READY DLP TV SP50L6HX

BP68-00478E-00Eng_0826
8/26/05
6:04 PM
Page 1
DLP TV
SP42L6HX
SP46L6HX
SP50L6HX
SP56L6HX
SP61L6HX
SP67L6HX
Owner’s Instructions
Before operating the unit,
please read this manual thoroughly,
and retain it for future reference.
Picture In Picture (PIP)
Color Weakness Enhancement Mode
My Color Control
SRS TruSurroundXT
Digital Natural Image engine
This device is a Class B digital apparatus.
Register your product at www.samsung.com/global/register
BP68-00478E-00Eng_0826
8/26/05
6:04 PM
Page 2
BP68-00478E-00Eng_0826
8/26/05
6:04 PM
Page 3
Contents
◆ CONNECTING AND PREPARING YOUR TELEVISION
■
■
■
■
■
■
■
■
■
■
■
Control Panel of Your Television ...................................................................
Connection Panel of Your Television ............................................................
Connecting to an Aerial or Cable Television Network ...................................
Connecting a Satellite Receiver or Decoder..................................................
Infrared Remote Control ................................................................................
Inserting the Batteries in the Remote Control................................................
Switching Your Television On and Off...........................................................
Placing Your Television in Standby Mode .....................................................
Becoming Familiar with the Remote Control .................................................
Plug & Play Feature.......................................................................................
Choosing Your Language..............................................................................
5
6
8
8
9
10
11
11
12
13
14
◆ USING YOUR TELEVISION
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
Storing Channels Automatically.....................................................................
Storing Channels Manually............................................................................
Skipping Unwanted Channels .......................................................................
Sorting the Stored Channels .........................................................................
Activating the Child Lock ...............................................................................
Assigning Names to Channels ......................................................................
Fine Tuning Channel Reception ....................................................................
Using the LNA (Low Noise Amplifier) Feature...............................................
Viewing the Channel Scan Picture ................................................................
Displaying Information ...................................................................................
Freezing the Current Picture .........................................................................
Changing the Picture Standard .....................................................................
Adjusting the Picture Settings........................................................................
Selecting the Picture Size..............................................................................
Using the Digital NR (Noise Reduction) Feature ...........................................
DNIeTM (Digital Natural Image engine)
...............................................
Setting the My Color Control (Easy Control) .................................................
Setting the My Color Control (Detail Control) ................................................
Symbols
Press
☛
Important
15
16
18
19
20
21
22
23
23
24
24
25
26
27
28
28
29
30
➢
Note
English - 3
BP68-00478E-00Eng_0826
8/26/05
6:04 PM
Page 4
➢
Contents (continued)
◆ USING YOUR TELEVISION (continued)
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
Setting the Film Mode....................................................................................
Viewing the Picture In Picture (PIP) ..............................................................
Changing the Sound Standard ......................................................................
Adjusting the Sound Settings ........................................................................
Setting the SRS TSXT...................................................................................
Adjusting the Volume Automatically ..............................................................
Enjoying the Sound of External Speakers .....................................................
Selecting the Sound Mode (depending on the model) ..................................
Setting and Displaying the Current Time.......................................................
Setting the Sleep Timer .................................................................................
Switching the Television On and Off Automatically .......................................
Setting the Blue Screen.................................................................................
Setting the Melody Sound .............................................................................
Using the Color Weakness Enhancement Feature .......................................
Setting the Picture in PC Mode .....................................................................
Viewing an External Signal Source ...............................................................
Assigning Names to External Sources ..........................................................
31
32
34
35
35
36
37
38
39
40
41
42
42
43
44
45
46
(
◆ USING THE TELETEXT FEATURE
■
■
■
■
Teletext Feature ............................................................................................
Displaying the Teletext Information ...............................................................
Selecting Display Options..............................................................................
Selecting a Teletext Page..............................................................................
47
48
48
49
◆ ADDITIONAL INFORMATION AND CONNECTIONS
■
■
■
■
■
■
■
Connecting to the External Input/Output .......................................................
Connecting to the S-Video Input....................................................................
Connecting to the Digital Input ......................................................................
Connecting to the Component Input..............................................................
Connecting to the PC Input ...........................................................................
Setting up Your PC Software (Windows only) ...............................................
PC/HDMI(DVI) Input Mode ............................................................................
50
51
52
53
53
54
55
◆ RECOMMENDATIONS FOR USE
■
■
■
■
■
Setting Up Your Remote Control ...................................................................
Programming the Remote Control for Other Components ............................
Replacing the Lamp.......................................................................................
Troubleshooting: Before Contacting Service Personnel................................
Technical Specifications ................................................................................
English - 4
56
57
59
60
61
➢
BP68-00478E-00Eng_0826
8/26/05
6:04 PM
Page 5
Control Panel of Your Television
➢
The actual configuration on your TV may be different, depending on
your model.
Switch among video input modes
Display the on-screen menu
Adjust the volume
Select the channels
LED Indicators
Access to the selected option on
the menu system
Picture On/Off
Switch the TV On and Off
Remote Control Sensor
(
:On,
:Blinking,
TIMER
LAMP
:Off)
STAND BY/TEMP
Indication
Standby mode.
A timer pilot lights when Timer Auto On or Off is selected.
Normal operation.
Normal operation (when Timer Auto On or Off is selected).
Lamp is warming up. The normal picture comes on after 25 seconds.
The normal picture comes on after 25 seconds. (when Timer Auto On or
Off is selected)
Air vent cover in the rear of the TV is not properly installed.
Inside temperature of the TV is over normal. Clean the air vent cover in the
rear of the TV. Turn the TV back on after 1 hour.
The lamp does not work, please contact an authorized Service Center for
assistance.
➢
◆ You can use the channel selection buttons to switch on the TV when it is in standby mode
depending on the model.
◆ When using the on-screen menu the volume adjustment and channel selection buttons have
the same function as the …/†/œ/√ buttons on the remote control.
◆ If the remote control no longer works or your have lost it, you can use controls on the panel
of the TV.
English - 5
BP68-00478E-00Eng_0826
8/26/05
6:04 PM
Page 6
Connection Panel of Your Television
➢
The actual configuration on your TV may be different, depending on
your model.
Video Input
English - 6
Audio Input
S-Video Input
➢
n
BP68-00478E-00Eng_0826
8/26/05
6:04 PM
Page 7
Connection Panel of Your Television (continued)
➢
The actual configuration on your TV may be different, depending on
your model.
Rear of the TV
ΠANT IN
Coaxial connector for aerial or cable
network.
´ S-Video Input
Connect to S-Video output jacks of an
S-VHS VCR or DVD player.
ˇ Audio/Video Input
Connect to the audio/video output jacks of
VCRs, DVD players and similar devices.
¨ Audio/Video Output
Connect to the audio/video input jacks of a
recording VCR.
ˆ COMPONENT Input
Connect to the audio and video outputs of
DVD or DTV Set-Top Box.
480i/480p/576i/576p/720p/1080i Y, PB and
PR video signal outputs are available.
Ø PC Input
Connect to the PC audio/video outputs.
∏ DVI Audio Input
Connect to the audio output jacks for device
with DVI output.
” HDMI/DVI Input
Connect to the digital device with HDMI or
DVI output.
’ SERVICE Jack
It is for repairs and software upgrades.
˝ SCART Input/Output
Inputs or outputs for external devices, such
as VCR, DVD, video game device or video
disc players.
English - 7
BP68-00478E-00Eng_0826
8/26/05
6:04 PM
Page 8
Connecting to an Aerial or Cable Television Network
➢
To view television channels correctly, a signal must be received by
the set from one of the following sources:
◆ An outdoor aerial
◆ A cable television network
◆ A satellite network
Rear of the TV
1
In the first three cases, connect the aerial or network input cable to
the ANT IN jack on the rear of the television.
2
If you are using an indoor aerial, you may need to turn it when
tuning your television until you obtain a picture that is both sharp
and clear.
For further details, refer to:
◆ “Storing Channels Automatically” on page 15.
◆ “Storing Channels Manually” on page 16.
or
Cable Television
Network
Connecting a Satellite Receiver or Decoder
In order to watch television programmes broadcast via
a satellite network, you must connect a satellite receiver
to the rear of TV. Also, in order to descramble a coded
transmission signal, you must connect a decoder
to the rear of TV.
Rear of the TV
◆ Using a RCA cable
Connect the receiver (or decoder) RCA cable to one of the
RCA connectors on the rear of the television.
M
◆ Using a coaxial cable
Connect a coaxial cable to the:
- Receiver (or Decoder) output socket.
- Television aerial input socket.
➢
If you wish to connect both a satellite receiver (or decoder)
and a VCR, you should connect the:
◆ Receiver (or Decoder) to the VCR
◆ VCR to the television
Otherwise, connect the receiver (or decoder) directly to
the television.
English - 8
Satellite Receiver/
Decoder
BP68-00478E-00Eng_0826
8/26/05
6:04 PM
Page 9
Infrared Remote Control
➢
The performance of the remote control may be affected by bright light.
POWER ON/OFF
o
PICTURE EFFECT SELECTION
PICTURE SIZE
WHEN YOU PRESS A BUTTON , ‘
’
APPEARS ALONG WITH SELECTED MODE
(TV, VCR, CATV, DVD OR STB) AND
REMAINING BATTERIES ON LCD
MAKE THE REMOTE CONTROL WORKS
FOR TV, VCR, CABLE-BOX (CATV),
DVD PLAYER, OR SET-TOP BOX (STB)
DIRECT CHANNEL SELECTION
SWITCH REPEATEDLY BETWEEN THE
LAST TWO CHANNELS DISPLAYED
ONE OR TWO-DIGIT CHANNEL
SELECTION
VOLUME INCREASE
TEMPORARY SOUND SWITCH-OFF
NEXT CHANNEL/
TELETEXT NEXT PAGE
EXTERNAL INPUT SELECTION/
TELETEXT HOLD
VOLUME DECREASE
PREVIOUS CHANNEL/
TELETEXT PREVIOUS PAGE
TUNER/CABLE NETWORK
SELECTION
DISPLAY INFORMATION/
TELETEXT REVEAL
EXIT FROM ANY DISPLAY
MENU DISPLAY/
TELETEXT INDEX
MOVE TO THE REQUIRED MENU
OPTION/
ADJUST AN OPTION VALUE
RESPECTIVELY
CONFIRM YOUR CHOICE
(STORE OR ENTER)
SOUND EFFECT SELECTION
SOUND MODE SELECTION
➢
STILL THE MAIN PICTURE
In the PIP mode, the main and
sub pictures are stilled
at the same time.
TELETEXT DISPLAY/
MIX BOTH TELETEXT INFORMATION
AND THE NORMAL BROADCAST
AUTOMATIC SWITCH-OFF/
TELETEXT CANCEL
DNIe ON/DEMO/OFF/
TELETEXT SIZE SELECTION
SET THE MBR CODE OF REMOTE
CONTROL FOR THE PRODUCTS
EXCEPT SAMSUNG PRODUCT
(OPTION)
IF YOUR REMOTE CONTROL IS
NOT FUNCTIONING PROPERLY,
TAKE OUT THE BATTERIES AND
PRESS THE RESET BUTTON FOR
ABOUT 2~3 SECONDS. REINSERT THE BATTERIES AND
TRY USING THE REMOTE
CONTROL AGAIN.
SRS TruSurround XT MODE SELECTION
FASTEXT TOPIC SELECTION
CURRENT TIME DISPLAY/
TELETEXT SUBPAGE
PIP FUNCTIONS;
- PIP ACTIVATING OR DEACTIVATING
(PIP ON)
- SWAPPING THE MAIN AND THE SUB
PICTURE (SWAP)
- SELECTING THE CHANNEL OF SUB
PICTURE (P^/∨)
VCR/DVD FUNCTIONS;
- REWIND (REW)
- STOP
- PLAY/PAUSE
- FAST FORWARD (FF)
English - 9
BP68-00478E-00Eng_0826
8/26/05
6:04 PM
Page 10
Inserting the Batteries in the Remote Control
You must insert or replace the batteries in the remote control when
you:
T
◆ Purchase the television
◆ Find that the remote control is no longer operating
correctly
1
Remove the cover on the rear of the remote control by pressing
the symbol ( ) downwards and then pulling firmly to remove it.
2
Insert two R03, UM4, “AAA” 1.5V or equivalent batteries taking
care to respect the polarities:
◆ - on the battery against - on the remote control
◆ + on the battery against + on the remote control
3
Replace the cover by aligning it with the base of the remote
control and pressing it back into place.
Do not mix battery types, i.e. alkaline and manganese.
Y
th
T
v
English - 10
n
BP68-00478E-00Eng_0826
8/26/05
6:04 PM
Page 11
Switching Your Television On and Off
The mains lead is attached to the rear of your television.
1
Plug the mains lead into an appropriate socket.
➢
The main voltage is indicated on the rear of the television
and the frequency is 50 or 60Hz.
2
Press the power switch on the side of the television toward “ON”
(I).
3
Press the POWER ( ) button on the remote control (or the “ ”
button on the front of the television).
Result:
➢
4
The programme that you were watching last is reselected automatically.
If you have not yet stored any channels, No clear picture
appears. Refer to “Storing Channels Automatically” on page
15 or “Storing Channels Manually” on page 16.
TV
To switch your television off, press the power switch toward “OFF”
(O).
Placing Your Television in Standby Mode
Your television can be placed in Standby mode, in order to reduce
the power consumption.
The Standby mode can be useful when you wish to interrupt
viewing temporarily (during a meal, for example).
TV
1
Press the POWER (
screen off.
Result:
2
) button on the remote control to turn the
The STAND BY/TEMP indicator on the front of the
television lights.
To turn the screen back on, simply press the POWER (
again.
➢
☛
You can also switch on by pressing the P
button.
/
) button
, TV or numeric
Do not leave your television in Standby mode for long
periods of time (when you are away on holiday, for
example). Turn your television off by pressing the power
switch on the back of the set. It is best to unplug the set
from the mains and aerial.
English - 11
BP68-00478E-00Eng_0826
8/26/05
6:04 PM
Page 12
Becoming Familiar with the Remote Control
The remote control is used mainly to:
◆ Change channels and adjust the volume
◆ Display the on-screen menu system
The following table presents the most frequently used buttons and
their functions.
Button
to
-/--
Viewing Function
Menu Function
Used to display the next
stored channel.
-
Used to display the
previous stored channel.
-
Used to display the corresponding channels.
➢ For double digit channels, the second digit must be
pushed immediately after the first. Failure to do this will
result in a single digit channel being displayed.
Used to select a channel numbered ten or over.
Press this button, and the “--” symbol is displayed.
Enter the two-digit channel number.
Used to switch repeatedly between the last two channels
displayed.
To quickly switch between two channels that are far apart,
tune to one channel, then use the numeric buttons to select
second channel. Then, use the PRE-CH button to quickly
alternate between them.
Used to increase the
volume.
-
Used to decrease the
volume.
-
Used to switch the sound off temporarily.
➢ To turn the sound back on, press this button again, or
press the
or
button.
English - 12
Used to display the
on-screen menu system.
Used to return to the previous
menu or normal viewing.
-
Used to:
◆ Display a submenu
containing selections for
the current menu option
◆ Increase/decrease a
menu option value
-
Used to confirm your choice.
-
Used to exit from the menu
system and return to normal
viewing directly.
W
se
se
BP68-00478E-00Eng_0826
8/26/05
6:04 PM
Page 13
Plug & Play Feature
When the television is initially powered ON, several basic customer
settings proceed automatically and subsequently. The following
settings are available.
Plug & Play
Start Plug & Play
Start
1
If the television is in Standby mode, press the POWER (
on the remote control.
2
To start the Plug & Play, select the Start and press the ENTER
button.
Result:
3
5
Türkçe
Français
Move
Enter
Plug & Play
The available areas are listed.
OK
Enter
Skip
The Auto Store menu is displayed.
Plug & Play
Press the ENTER button to start the search
Result:
➢
Area
Asia/W.Europe
CIS/E.Europe
China
Hongkong/UK
Australia
NZ/Indonesia
South Africa
America
The search will end automatically. Channels are sorted
and stored in an order which reflects their position in
the frequency range (with lowest first and highest last).
To stop the search before it has finished or return to normal
viewing, press the EXIT or ENTER button.
Move
7
Skip
Check antenna input.
Select the appropriate area by pressing the … or † button.
Press the ENTER button to confirm your choice.
Result:
6
English
Make sure that the antenna is connected to the TV, and then
press the ENTER button.
Result:
ll
Plug & Play
The available languages are listed.
The message Check antenna input is displayed.
Return
Language
Select the appropriate language by pressing the … or † button.
Press the ENTER button to confirm your choice.
Result:
4
Enter
) button
When the channels have been stored, the Clock Set menu is
displayed. Press the ENTER button to set the current time.
Press the œ or √ button to move to the hour or minute.
Set these by pressing the ▲ or ▼ button.
Press the ENTER button to confirm your choice.
Enter
Skip
Plug & Play
Auto Store
Start
8
When it has finished, the message Enjoy your watching is
displayed, and then the channel which has been stored will be
activated.
Enter
Skip
Plug & Play
Auto Store
175 MHz
18%
Stop
Enter
Skip
Plug & Play
Clock Set
: - - : - - am
Enter
Enjoy your watching.
OK
English - 13
Skip
BP68-00478E-00Eng_0826
8/26/05
6:04 PM
Page 14
Plug & Play Feature (continued)
If you want to reset this feature...
1
Press the MENU button.
Result:
2
Press the ▲ or ▼ button to select Setup.
Result:
3
The main menu is displayed.
The options available in the Setup group are displayed.
Press the ENTER button.
Result:
The Plug & Play is selected.
4
Press the ENTER button again.
5
To start the Plug & Play, select the Start and press the ENTER
button.
6
For further details on how to set, refer to the previous page.
Setup
TV
√
√
√
√
√
√
√
Plug & Play
Language
: English
Time
Blue Screen
: Off
Melody
: On
Color Weakness : Off
PC
Move
Enter
Return
Choosing Your Language
Setup
TV
√
√
√
√
√
√
√
Plug & Play
Language
: English
Time
Blue Screen
: Off
Melody
: On
Color Weakness : Off
PC
When you start using your television for the first time, you must
select the language which will be used for displaying menus and
indications.
1
Result:
2
Move
Enter
Return
Setup
TV
Plug & Play
English
Language
: English
Time
Blue Screen
: Off Türkçe
Français
Melody
: Off
Color Weakness : Off
PC
Move
Enter
English - 14
Return
Press the MENU button.
The main menu is displayed.
Press the ▲ or ▼ button to select Setup.
Result:
The options available in the Setup group are displayed.
3
Press the ENTER button.
4
Press the ▲ or ▼ button to select Language.
Press the ENTER button.
Result:
The available languages are listed.
5
Select the appropriate language by pressing the ▲ or ▼ button.
6
Press the ENTER button to confirm your choice.
Y
av
p
p
c
d.
BP68-00478E-00Eng_0826
8/26/05
6:04 PM
Page 15
Storing Channels Automatically
You can scan for the frequency ranges available to you (and
availability depends on your country). Automatically allocated
programme numbers may not correspond to actual or desired
programme numbers. However you can sort numbers manually and
clear any channels you do not wish to watch.
1
√
√
√
√
√
√
√
Auto Store
Manual Store
Add/Delete
Sort
Child Lock
Name
Fine Tune
† More
Press the MENU button.
Result:
Channel
TV
The main menu is displayed.
Move
2
Result:
3
The Area is selected.
The available areas are listed.
Select the appropriate area by pressing the ▲ or ▼ button.
Press the ENTER button to confirm your choice
7
Press the ▲ or ▼ button to select Search.
Press the ENTER button.
8
To start the search, select the Start and press the ENTER
button.
Result:
➢
10
: Asia/W.Europe
Asia/W.Europe
CIS/E.Europe √
China
Hongkong/UK
Australia
NZ/Indonesia
South Africa
America
The Auto Store is selected.
6
d.
Area
Search
Move
Enter
Return
Press the ENTER button once again.
Result:
9
Return
Auto Store
TV
Press the ENTER button again.
Result:
5
The options available in the Channel group are
displayed.
Press the ENTER button.
Result:
4
Enter
Press the ▲ or ▼ button to select Channel.
Auto Store
TV
Move
The search will end automatically. Channels are sorted
and stored in an order which reflects their position in
the frequency range (with lowest first and highest last).
The programme originally selected is then displayed.
Enter
Return
Search
Press ENTER to start.
Start
To stop the search before it has finished or return to normal
viewing, press the EXIT or ENTER button.
Enter
When searching and storing are complete, the Sort menu is
displayed.
◆ To sort the stored channels into the desired numerical order,
go to Step 5 of the “Sorting the Stored Channels” procedure
on page 19.
◆ To exit from the channel store function without sorting the
channels, press the MENU button repeatedly until the menus
disappear.
When the channels have been stored, you can:
◆ Sort them in the order required (see page 19)
◆ Clear a channel (see page 18)
◆ Assign a name to the stored channels (see page 21)
◆ Fine-tune channel reception if necessary (see page 22)
◆ Activate/deactivate the LNA (Low Noise Amplifier) feature
(see page 23)
◆ Activate/deactivate the Digital NR (Noise Reduction)
feature (see page 28)
: Asia/W.Europe √
√
Area
Search
Return
Search
Auto Store in progress.
175 MHz
18%
Stop
Enter
Return
Sort
TV
Prog. Ch.
1
2
3
4
5
---------------------
Move
*
*
*
*
*
Enter
English - 15
Return
BP68-00478E-00Eng_0826
8/26/05
6:04 PM
Page 16
Storing Channels Manually
You can store the television channels, including those received via
cable networks.
Channel
TV
√
√
√
√
√
√
√
Auto Store
Manual Store
Add/Delete
Sort
Child Lock
Name
Fine Tune
† More
Move
Enter
When storing channels manually, you can choose:
◆ Whether or not to store each of the channels found
◆ The programme number of each stored channel which
you wish to identify
Return
1
Press the MENU button.
Result:
The main menu is displayed.
Manual Store
Prog.
Color System Sound System
1
AUTO
BG
Channel
Search
Store
C --
887MHz
?
œ √ Move
Adjust
2
Result:
3
Press the ENTER button.
4
Press the ▲ or ▼ button to select Manual Store.
Press the ENTER button.
Result:
Color System Sound System
1
AUTO
BG
Channel
Search
Store
C --
887MHz
?
œ √ Move
Adjust
Return
To assign a programme number to a channel, find the correct
number by pressing the … or † button.
6
If necessary, select the broadcasting standard required. Press the
œ or √ button to select Color System and press the … or †
button. The color standards are displayed in the following order.
(depending on the model).
AUTO
BG
Channel
Search
Store
C --
887MHz
?
œ √ Move
◆ AUTO - PAL - SECAM
Color System Sound System
1
Adjust
Return
The option available in the Manual Store group are
displayed with Prog. is selected.
5
Manual Store
Prog.
The options available in the Channel group are
displayed.
Return
Manual Store
Prog.
Press the ▲ or ▼ button to select Channel.
◆ AUTO - NTSC3.58 - NTSC4.43 - PAL60
7
Press the œ or √ button to select Sound System and press the …
or † button. The sound standards are displayed in the following
order. (depending on the model).
BG - DK - I - M
English - 16
☛
BP68-00478E-00Eng_0826
6:04 PM
Page 17
Storing Channels Manually (continued)
8
If you know the number of the channel to be stored, see the
following steps.
◆ Press the œ or √ button to select Channel.
◆ Press the ▲ or ▼ button to select C (Air channel) or S (Cable
channel).
◆ Press the √ button.
Manual Store
Prog.
➢
9
If there is no sound or abnormal sound, reselect the sound
standard required.
If you do not know the channel numbers, select the Search by
pressing the œ or √ button. Press the … or † button to start the
search.
Result:
AUTO
BG
Channel
Search
Store
C --
887MHz
?
œ √ Move
Prog.
Result:
11
The OK is displayed.
Return
Color System Sound System
1
AUTO
BG
Channel
Search
Store
C --
887MHz
?
œ √ Move
The tuner scans the frequency range until the first
channel or the channel that you selected is received
on your screen.
To store the channel and associated programme number, select
the Store by pressing the œ or √ button. Press the ENTER
button.
Adjust
Manual Store
Adjust
Return
Manual Store
Prog.
10
Color System Sound System
1
◆ Press the numeric buttons (0~9), … or † button to select
indicate the required number.
e
…
8/26/05
Color System Sound System
1
AUTO
BG
Channel
Search
Store
C 02
887MHz
?
œ √ Move
Adjust
Return
Repeat Steps 8 to 10 for each channel to be stored.
Manual Store
☛
Prog.
Channel mode
◆ P (Programme mode): When completing tuning, the
broadcasting stations in your area have been assigned to
position numbers from P00 to P99. You can select a channel
by entering the position number in this mode.
Color System Sound System
1
AUTO
BG
Channel
Search
Store
C 02
887MHz
OK
œ √ Move
Enter
◆ C (Real channel mode): You can select a channel by
entering the assigned number to each air broadcasting station
in this mode.
◆ S (Cable channel mode): You can select a channel by
entering the assigned number for each cable channel in this
mode.
English - 17
Return
BP68-00478E-00Eng_0826
8/26/05
6:04 PM
Page 18
Skipping Unwanted Channels
Channel
TV
√
√
√
√
√
√
√
Auto Store
Manual Store
Add/Delete
Sort
Child Lock
Name
Fine Tune
† More
You can exclude the channels of your choice from the channel scan
operation. When you scan through the stored channels, those that
you have chosen to skip are thus not displayed. All channels that
you do not specifically choose to skip are displayed during
scanning.
1
Result:
Move
Enter
The main menu is displayed.
Return
2
Press the ▲ or ▼ button to select Channel.
Result:
Add/Delete
TV
Press the MENU button.
The options available in the Channel group are
displayed.
Prog. Ch.
1
2
3
4
5
---------------------
Deleted
Deleted
Deleted
Deleted
Deleted
*
*
*
*
*
3
Press the ENTER button.
4
Press the ▲ or ▼ button to select Add/Delete.
Press the ENTER button.
Result:
Move
Enter
Return
5
Press the ▲ or ▼ button to select the channel to be added or
deleted. Press the ENTER button.
6
To add or delete the channel, select Added or Deleted by
pressing the ▲ or ▼ button.
7
Press the ENTER button to confirm.
Add/Delete
TV
Prog. Ch.
1
2
3
4
5
---------------------
Adjust
Deleted
Deleted
Added
Deleted
Deleted
*
*
*
*
*
Enter
English - 18
Return
The Add/Delete menu is displayed with the current
channel automatically is selected.
T
st
a
n
BP68-00478E-00Eng_0826
8/26/05
6:04 PM
Page 19
Sorting the Stored Channels
This operation allows you to change the programme numbers of
stored channels. This operation may be necessary after using the
auto store. You can delete those channels you do not want to keep.
1
2
The main menu is displayed.
Press the ▲ or ▼ button to select Channel.
Result:
Press the ENTER button.
4
Press the ▲ or ▼ button to select Sort. Press the ENTER button.
Result:
Move
The options available in the Channel group are
displayed.
3
Select the channel that you wish to move by pressing the ▲ or ▼
button. Press the ENTER button.
6
Select the number of the programme to which the channel is to be
moved by pressing the ▲ or ▼ button. Press the ENTER button.
Enter
Prog. Ch.
1
2
3
4
5
---------------------
*
*
*
*
*
Move
Result:
7
The channel is moved to its new position and all other
channels are shifted accordingly.
Repeat Steps 5 to 6 until you have moved all the channels to the
required programme numbers.
Return
Sort
TV
The Sort menu is displayed.
5
√
√
√
√
√
√
√
Auto Store
Manual Store
Add/Delete
Sort
Child Lock
Name
Fine Tune
† More
Press the MENU button.
Result:
Channel
TV
Enter
Return
Sort
TV
Prog. Ch.
1
2
3
4
5
---------------------
Move
-----
*
*
*
*
*
Enter
English - 19
*
Return
BP68-00478E-00Eng_0826
8/26/05
6:04 PM
Page 20
Activating the Child Lock
Channel
TV
√
√
√
√
√
√
√
Auto Store
Manual Store
Add/Delete
Sort
Child Lock
Name
Fine Tune
† More
This feature allows you to prevent unauthorized users, such as
children, from watching unsuitable programmes by muting out
video and audio. Child Lock cannot be released using front panel
buttons. Only remote control can release the Child Lock setting, so
keep the remote control away from children.
1
Result:
Move
Enter
Prog. Ch.
---------------------
Press the ▲ or ▼ button to select Channel.
Result:
Child Lock
1
2
3
4
5
The main menu is displayed.
Return
2
TV
Press the MENU button.
The options available in the Channel group are
displayed.
Lock
Unlocked
Unlocked
Unlocked
Unlocked
Unlocked
*
*
*
*
*
3
Press the ENTER button.
4
Press the ▲ or ▼ button to select Child Lock.
Press the ENTER button.
Result:
Move
Enter
Return
The Child Lock menu is displayed with the current
channel automatically is selected.
Blue Screen is displayed when the Child Lock is
activated.
Child Lock
TV
Prog. Ch.
1
2
3
4
5
---------------------
Adjust
5
Press the … or † button to select the channel to be locked.
6
Press the ENTER button. To lock the channel, select Locked by
pressing the … or † button (to unlock the channel, select
Unlocked).
7
Press the ENTER button to confirm.
Lock
Unlocked
Unlocked
Locked
Unlocked
Unlocked
*
*
*
*
*
Enter
English - 20
Return
C
in
yo
BP68-00478E-00Eng_0826
8/26/05
6:04 PM
Page 21
Assigning Names to Channels
Channel names will be assigned automatically when channel
information is broadcast. These names can be changed, allowing
you to assign new names.
Press the MENU button.
Result:
2
The main menu is displayed.
Press the ▲ or ▼ button to select Channel.
Result:
Press the ENTER button.
4
Press the ▲ or ▼ button to select Name. Press the ENTER button.
Result:
5
Enter
Prog. Ch.
2
3
4
5
6
The Name menu is displayed with the current channel
automatically is selected.
Return
Name
TV
If necessary, select the channel to be assigned to a new name by
pressing the … or † button. Press the ENTER button.
Result:
6
Move
The options available in the Channel group are
displayed.
3
√
√
√
√
√
√
√
Auto Store
Manual Store
Add/Delete
Sort
Child Lock
Name
Fine Tune
† More
o
1
Channel
TV
Name
---------------------
Move
*
*
*
*
*
Enter
Return
Arrow indications are displayed around the name box.
Press the … or † button to select a letter (A~Z), a number (0~9)
or a symbol (space, ., -).
Move on to the previous or next letter by pressing the œ or √
button.
7
Repeat Steps 5 to 6 for each channel to be assigned to a new
name.
8
When you have finished entering the name, press the ENTER
button to confirm the name.
Name
TV
Prog. Ch.
2
3
4
5
6
Name
---------------------
œ √ Move
*
*
A *
*
*
Adjust
English - 21
Return
BP68-00478E-00Eng_0826
8/26/05
6:04 PM
Page 22
Fine Tuning Channel Reception
Channel
TV
√
√
√
√
√
√
√
Auto Store
Manual Store
Add/Delete
Sort
Child Lock
Name
Fine Tune
† More
Move
Enter
Return
If the reception is clear, you do not have to fine tune the channel,
as this is done automatically during the search and store operation.
If the signal is weak or distorted, you may have to fine tune the
channel manually.
1
Fine Tune
0
Reset
Return
œ √ Adjust
Move
The options available in the Channel group are
displayed.
3
Press the ENTER button.
4
Press the ▲ or ▼ button to select Fine Tune.
Press the ENTER button.
Save
Result:
Fine Tune
The main menu is displayed.
Press the ▲ or ▼ button to select Channel.
Result:
P1
The horizontal bar is displayed.
5
To obtain a sharp and clear picture and good sound quality, press
the œ or √ button until you reach the required setting.
6
To store the fine tuning setting in the TV’s memory, press the
ENTER button.
P1✻
T
m
Press the MENU button.
Result:
2
T
w
n
3
Reset
Return
œ √ Adjust
Move
Save
Result:
Fine Tune
7
P1✻
3
Reset
➢
The symbol “✻” is displayed beside the programme
number.
To reset the fine tuning to 0, select Reset by pressing the ▲ or ▼
button then press the ENTER button.
Return
Move
Enter
Fine Tune
P1
0
Reset
Return
Move
Enter
English - 22
T
m
.
s
BP68-00478E-00Eng_0826
8/26/05
6:04 PM
Page 23
Using the LNA (Low Noise Amplifier) Feature
This feature is very useful in the situation that the TV is used in a
weak signal, and amplifies the TV signal in the weak signal area, but
not noise.
Channel
TV
… More
LNA
Scan
This feature is working only in a weak signal condition, and that is
memorized on relevant channel’s additional information.
1
The main menu is displayed.
Move
Enter
Return
Press the ▲ or ▼ button to select Channel.
Result:
The options available in the Channel group are
displayed.
3
Press the ENTER button.
4
Press the ▲ or ▼ button to select LNA. Press the ENTER button.
5
Select Off or On by pressing the ▲ or ▼ button.
6
Press the ENTER button to confirm.
➢
Off
On
Press the MENU button.
Result:
2
: Off
◆ If the picture is noisy with the LNA set to On, select Off.
◆ LNA setting is to be made for each channel.
Viewing the Channel Scan Picture
This feature automatically scans all of the channels it has
memorized.
1
… More
LNA
Scan
Press the MENU button.
Result:
2
Channel
TV
: Off
√
√
The main menu is displayed.
Press the ▲ or ▼ button to select Channel.
Result:
The options available in the Channel group are
displayed.
3
Press the ENTER button.
4
Press the ▲ or ▼ button to select Scan. Press the ENTER button.
Result:
You can view every memorized channel in order
through the sub picture. When viewing has finished or
stopped, the PIP feature will be activated
Move
Enter
Scan
P 1
*
P 9
*
Return
English - 23
Return
BP68-00478E-00Eng_0826
8/26/05
6:04 PM
Page 24
Displaying Information
You can view the channel information and setting status you select
by pressing the “INFO” button on the remote control.
The information displayed varies according to the selected source.
P 1 *
Mono
Picture
Sound
SRS TSXT
Sleep Timer
Clock
Standard
Custom
Off
Off
-- : -- am
TV
Freezing the Current Picture
You can freeze the picture when watching a television programme
simply by pressing the “STILL” button. To return to normal viewing,
press it again.
➢
Still
English - 24
In the PIP mode, the main and sub pictures are stilled at
the same time.
Y
v
t
BP68-00478E-00Eng_0826
8/26/05
6:04 PM
Page 25
Changing the Picture Standard
You can select the type of picture which best corresponds to your
viewing requirements.
1
Mode
: Standard
Color Tone
: Cool1
Size
: 16 : 9
Digital NR
: Off
DNIe
: On
My Color Control
Film Mode
: Off
PIP
Press the MENU button.
Result:
The main menu is displayed.
Press the ▲ or ▼ button to select Picture.
2
Result:
3
Picture
TV
The options available in the Picture group are
displayed.
Move
Enter
√
√
√
√
√
√
√
√
Return
Press the ENTER button.
Result:
4
The Mode is selected.
Press the ENTER button again.
Result:
5
The options available are displayed with the Mode is
selected.
Press the ENTER button once again. Select the required option
by pressing the ▲ or ▼ button.
Result:
TV
Mode
Mode
Contrast
Brightness
Sharpness
Color
Tint G/R
Reset
Move
Dynamic
: Dynamic
Standard100
Cinema 45
65
50
50
Enter
The following modes are available.
Dynamic - Standard - Cinema
6
Press the ENTER button to confirm.
➢
You can also select these options simply by pressing the
P.MODE (Picture Mode) button.
g,
English - 25
Return
BP68-00478E-00Eng_0826
8/26/05
6:04 PM
Page 26
Adjusting the Picture Settings
Your television has several settings which allow you to control
picture quality.
Picture
TV
√
√
√
√
√
√
√
√
Mode
: Standard
Color Tone
: Cool1
Size
: 16 : 9
Digital NR
: Off
DNIe
: On
My Color Control
Film Mode
: Off
PIP
Move
TV
Enter
: Standard
2
Enter
Return
Contrast
6
TV
Mode
Mode
Contrast
Brightness
Sharpness
Color
Tint G/R
Reset
Move
: Standard
Enter
√
100
50
65
50
50
Return
The options are adjustable in each mode (Dynamic,
Standard or Cinema).
Press the œ or √ button until you reach the required setting.
Press the ENTER button.
Result:
7
Result:
Mode
: Standard
Color Tone
: Normal
Cool2
Size
: 16 : 9Cool1
Digital NR
: Off Normal
DNIe
: On Warm1
Warm2
My Color Control
Film Mode
: Off
PIP
Move
Enter
The options available in the Picture group are
displayed again.
9
Press the ▲ or ▼ button to select Color Tone.
Press the ENTER button.
10
Select the required option by pressing the ▲ or ▼ button.
Result:
Return
11
English - 26
The previously adjusted picture settings will be reset to
the factory defaults.
Press the MENU button.
Picture
TV
The Mode menu is displayed again.
To reset the picture settings to the factory defaults, select Reset
by pressing the ▲ or ▼ button. Press the ENTER button.
Result:
8
The options available are displayed with the Mode is
selected.
Select the required option (Contrast, Brightness, Sharpness,
Color or Tint G/R-NTSC only) by pressing the ▲ or ▼ button.
Press the ENTER button.
➢
100
The Picture is selected.
Press the ENTER button again.
Result:
5
Move
The options available in the Picture group are
displayed.
Press the ENTER button.
Result:
4
The main menu is displayed.
Press the ▲ or ▼ button to select Picture.
Result:
3
√
100
50
65
50
50
Press the MENU button.
Result:
Return
Mode
Mode
Contrast
Brightness
Sharpness
Color
Tint G/R
Reset
1
The following modes are available.
Cool2 - Cool1 - Normal - Warm1 - Warm2
Press the ENTER button to confirm.
Y
v
BP68-00478E-00Eng_0826
8/26/05
6:04 PM
Page 27
Selecting the Picture Size
You can select the picture size which best corresponds to your
viewing requirements.
1
Mode
: Standard
Color Tone
: Cool1
Size
: 16 : 9
Digital NR
: Off
DNIe
: On
My Color Control
Film Mode
: Off
PIP
Press the MENU button.
Result:
The main menu is displayed.
Press the ▲ or ▼ button to select Picture.
2
Result:
The options available in the Picture group are
displayed.
3
Press the ENTER button.
4
Press the ▲ or ▼ button to select Size. Press the ENTER button.
Result :
Move
TV
◆ 16:9 - Panorama - Zoom1 - Zoom2 - 14:9 4:3
➢
The picture position ( ,
) and size ( )
adjustment are available in these mode by
pressing the ▲ or ▼ button. (Not available
for DTV signals - 480p, 576p, 720p, 1080i.)
Select the required mode by pressing the ▲ or ▼ button.
Press the ENTER button.
5
TV
Enter
Return
Size
16:9
Panorama
Zoom1
Zoom2
14:9
4:3
√ Move
Enter
o
➢
Return
Size
Move
Lifting is available in the Zoom1, Zoom2 or
14:9 mode by pressing the ▲ or ▼ button.
◆ 16:9 - 4:3
(PC, HDMI or DVI Mode).
Enter
√
√
√
√
√
√
√
√
16:9
Panorama
Zoom1
Zoom2
14:9
4:3
The following modes are available depending on the
model.
➢
Picture
TV
◆ You can select these option by simply pressing the
P.SIZE button on the remote control.
◆ You can not select Panorama screen size in the
Component mode.
◆ You can select only 16:9, 4:3 screen size in the PC or
HDMI mode.
◆ With PIP On, the screen automatically becomes 16:9
screen size.
◆ PIP will disappear automatically when you change
screen size with PIP on.
English - 27
Return
BP68-00478E-00Eng_0826
8/26/05
6:04 PM
Page 28
Using the Digital NR (Noise Reduction) Feature
If the signal received by your television is weak, you can activate
this feature to help reduce any static and ghosting that may appear
on the screen.
Picture
TV
Mode
: Standard
Color Tone
: Cool1
Size
: 16 : 9
Digital NR
: Off Off
DNIe
: On On
My Color Control
Film Mode
: Off
PIP
Move
Enter
1
Press the MENU button.
Result:
The main menu is displayed.
Press the ▲ or ▼ button to select Picture.
2
Result:
Return
The options available in the Picture group are
displayed.
3
Press the ENTER button.
4
Press the ▲ or ▼ button to select Digital NR.
Press the ENTER button.
5
Select Off or On by pressing the … or † button.
6
Press the ENTER button to confirm.
DNIeTM (Digital Natural Image engine)
This feature brings you more detailed image with 3D noise
reduction, detail enhancement, contrast enhancement and white
enhancement.
Picture
TV
Mode
: Standard
Color Tone
: Cool1
Size
: 16 : 9
Digital NR
: Off
DNIe
: On Off
Demo
My Color Control
Film Mode
: Off On
1
Press the MENU button.
Result:
Press the ▲ or ▼ button to select Picture.
2
PIP
Move
Enter
DNIe On
Result:
Return
DNIe Demo
DNIe Off
The options available in the Picture group are
displayed.
3
Press the ENTER button.
4
Press the ▲ or ▼ button to select DNIe. Press the ENTER button.
5
Press the ▲ or ▼ button to change the setting.
6
◆ Off
Switches off the DNIe mode.
◆ Demo
The screen before applying DNIe appears on the
right and the screen after applying DNIe appears
on the left.
◆ On
Switches on the DNIe mode.
Press the ENTER button to confirm.
➢
English - 28
The main menu is displayed.
You can select these options simply by pressing the DNIe
button.
T
p
p
“C
r
BP68-00478E-00Eng_0826
8/26/05
6:04 PM
Page 29
Setting the My Color Control (Easy Control)
This feature allows you to adjust colors to according to their
preferences, by adjusting skin, sky and grass tones using the
predefined settings (“Blue”, “Green”, “Pink”, “Standard”,
“Custom”) without affecting other colors on the screen.
1
2
The main menu is displayed.
Press the ▲ or ▼ button to select Picture.
Result:
The options available in the Picture group are
displayed.
3
Press the ENTER button.
4
Press the ▲ or ▼ button to select My Color Control.
Press the ENTER button.
Result:
Move
Enter
Return
My Color Control
TV
Easy Control
Detail Control
√
√
: Custom
The options available are displayed with the Easy
Control is selected.
Move
5
√
√
√
√
√
√
√
√
Mode
: Standard
Color Tone
: Cool1
Size
: 16 : 9
Digital NR
: Off
DNIe
: On
My Color Control
Film Mode
: Off
PIP
Press the MENU button.
Result:
Picture
TV
Enter
Return
Press the ENTER button.
Result :
The following modes are available:
◆ Blue
Emphasizes Clear Blues.
Original
Custom
◆ Green
Emphasizes Mild Greens.
◆ Pink
Emphasizing Warm Skin Colors.
◆ Standard
Standard Picture.
Easy Control
œ
Standard
œ √ Move
Custom
Enter
◆ Custom
Changing the settings in the Detail Control
menu will automatically set to Custom (see next
page).
6
Select the required mode by pressing the œ or √ button.
Result :
.
The original picture (before adjustment) is shown on
the left side, while the selected mode is shown on the
right side.
7
Press the ENTER button to confirm.
➢
◆ Depending on the input source (PC format signal of PC or
HDMI mode), this feature may not operate.
◆ This feature is operated when the “DNIe” is set to “On”
or “Demo” mode.
English - 29
Return
BP68-00478E-00Eng_0826
8/26/05
6:04 PM
Page 30
Setting the My Color Control (Detail Control)
This settings can be adjusted to suit your personal preferences.
Picture
TV
√
√
√
√
√
√
√
√
Mode
: Standard
Color Tone
: Cool1
Size
: 16 : 9
Digital NR
: Off
DNIe
: On
My Color Control
Film Mode
: Off
PIP
Move
Enter
Easy Control
Detail Control
Press the MENU button.
Result:
2
Press the ▲ or ▼ button to select Picture.
Result:
TV
Press the ENTER button.
4
Press the ▲ or ▼ button to select My Color Control.
Press the ENTER button.
5
Press the ▲ or ▼ button to select Detail Control.
Press the ENTER button.
√
√
: Blue
Enter
Return
Detail Control
Pink
Green
Blue
Reset
Select the required option (Pink, Green or Blue) by pressing the
▲ or ▼ button. Press the ENTER button.
7
Press the œ or √ button until you reach the required setting.
Result :
8
Return
9
Adjusted
10
Detail Control
Pink
Move
50
œ √ Adjust
TV
Return
Detail Control
Pink
Green
Blue
Reset
50
50
50
Move
Enter
English - 30
Return
The options available in the Detail Control group
are displayed again.
To return the factory defaults, select Reset by pressing the … or
† button.
Result:
Original
Changing the adjustment value will refresh the adjusted
screen.
Press the MENU button.
Result:
Enter
The available options are displayed.
6
50
50
50
Move
The options available in the Picture group are
displayed.
3
Result:
Move
The main menu is displayed.
Return
My Color Control
TV
1
The previously adjusted colors will be reset to the
factory defaults.
Press the ENTER button.
Y
a
d
BP68-00478E-00Eng_0826
8/26/05
6:04 PM
Page 31
Setting the Film Mode
You can automatically sense and process film signals from all sources
and adjust the picture for optimum quality.
1
Press the MENU button.
Result:
The main menu is displayed.
Press the ▲ or ▼ button to select Picture.
2
Result:
The options available in the Picture group are
displayed.
3
Press the ENTER button.
4
Press the ▲ or ▼ button to select Film Mode.
Press the ENTER button.
5
Select Off or On by pressing the ▲ or ▼ button.
6
◆ Off
Switches off the film mode.
◆ On
Automatically senses and processes film signals from
all sources and adjusts the picture for optimum quality.
Picture
TV
Mode
: Standard
Color Tone
: Cool1
Size
: 16 : 9
Digital NR
: Off
DNIe
: On
My Color Control
Film Mode
: Off Off
On
PIP
Move
Enter
Press the ENTER button to confirm.
➢
Film mode is supported in 480i mode only.
English - 31
Return
BP68-00478E-00Eng_0826
8/26/05
6:08 PM
Page 32
Viewing the Picture In Picture (PIP)
Picture
TV
√
√
√
√
√
√
√
√
Mode
: Standard
Color Tone
: Cool1
Size
: 16 : 9
Digital NR
: Off
DNIe
: On
My Color Control
Film Mode
: Off
PIP
Move
Enter
Return
You can display a sub picture within the main picture of TV program
or external A/V devices. In this way you can watch TV program or
monitor the video input from any connected devices while watching
TV or other video input.
1
Press the MENU button.
Result:
2
Press the ▲ or ▼ button to select Picture.
Result:
PIP
TV
PIP
Source
Swap
Size
Position
Prog.
Move
: On Off
: TV On
:
:
: P6
Enter
PIP
Source
Swap
Size
Position
Prog.
Move
Press the ENTER button.
4
Press the ▲ or ▼ button to select PIP. Press the ENTER button.
Result:
Press the ENTER button again. To activate, set the PIP to On by
pressing the ▲ or ▼ button. Press the ENTER button.
6
Press the ▲ or ▼ button to select Source. Press the ENTER
button. Select a source of the sub picture by pressing the ▲ or ▼
button.
TV
Ext
AV1
AV2
:
AV3
:
S-Video1
: P6 S-Video2
Result:
PIP
Source
Swap
Size
Position
Prog.
: On
: TV
:
:
: P6
➢
Return
√
√
√
√
√
√
Enter
Press the ENTER button.
8
Press the ▲ or ▼ button to select Swap. Press the ENTER button.
Result:
Return
PIP
Source
Swap
Size
Position
Prog.
Move
:
:
: P6
Enter
English - 32
The available sizes are displayed:
- Large
- Small
- Double1
- Double2
: On
: TV
10
Return
Ea
B
P
S
The main picture and sub picture are interchanged.
Press the ▲ or ▼ button to select Size. Press the ENTER button.
Select a size of the sub picture by pressing the ▲ or ▼ button.
Result:
PIP
TV
When the main picture is in the Component (480p/576p/
720p/1080i), PC or HDMI mode, only the TV, Ext, AV1, AV2,
AV3, S-Video1, S-Video2 or S-Video3 sources available.
7
9
Move
The available sources are displayed:
TV - Ext - AV1 - AV2 - AV3 - S-Video1 S-Video2 - S-Video3 - Component1 Component2 - PC - HDMI
PIP
TV
The PIP is selected.
5
Return
: On
: TV
Enter
The options available in the Picture group are
displayed.
3
PIP
TV
The main menu is displayed.
Press the ENTER button.
P
BP68-00478E-00Eng_0826
Page 33
Press the ▲ or ▼ button to select Position. Press the ENTER
button. Select a position of the sub picture by pressing the ▲ or ▼
button.
11
Result:
➢
PIP
TV
PIP
Source
Swap
Size
Position
Prog.
The available positions are displayed:
Move
Position can not be selected in the “
(Double2) picture size mode.
” (Double1) or “
Press the ENTER button.
13
Press the ▲ or ▼ button to select Prog.. Press the ENTER
button. Select the channel that you want to view through sub
picture by pressing the ▲ or ▼ button.
14
: On
: TV
:
:
: P6
Enter
PIP
PIP
Source
Swap
Size
Position
Prog.
: On
: TV
:
:
: P6
P6
Press the ENTER button.
Move
Enter
Easy functions of remote control.
Buttons
Feature
PIP
Used to activate or deactivate the PIP function directly.
SWAP
Used to interchange the main picture and the sub
picture.
➢
P
Return
”
TV
12
.
.
6:08 PM
Viewing the Picture In Picture (PIP) (continued)
m
y
8/26/05
/
When the main picture is in the Video mode and
the sub picture is in the TV mode, you might not
hear the sound of main picture when pressing
the SWAP button after changing the sub picture
channel. At this time, reselect the channel of
main picture.
Used to select the channel of sub picture.
English - 33
Return
BP68-00478E-00Eng_0826
8/26/05
6:08 PM
Page 34
Changing the Sound Standard
You can select the type of special sound effect to be used when
watching a given broadcast.
Sound
TV
Mode
√
: Custom
√
Equalizer
SRS TSXT
: Off
√
Auto Volume
: Off
√
Internal Mute
: Off
√
1
Press the MENU button.
Result:
Enter
Result:
Return
3
Mode
Result:
Equalizer
SRS TSXT
Auto Volume
Internal Mute
Move
Standard
: Custom
Music
: Off Movie
Speech
: Off
Custom
: Off
Enter
Return
The options available in the Sound group are displayed.
Press the ENTER button.
Sound
TV
The main menu is displayed.
Press the ▲ or ▼ button to select Sound.
2
Move
T
The Mode is selected.
4
Press the ENTER button again.
5
Select the option by pressing the … or † button.
The sound effects are displayed in the following order.
Standard - Music - Movie - Speech - Custom.
6
Press the ENTER button to confirm.
➢
You can also set these options simply by pressing the
S.MODE (Sound Mode) button.
Tr
pl
co
pl
w
English - 34
BP68-00478E-00Eng_0826
8/26/05
6:08 PM
Page 35
Adjusting the Sound Settings
The sound settings can be adjusted to suit your personal preferences.
Sound
TV
1
Mode
Press the MENU button.
√
: Custom
√
Equalizer
Result:
The main menu is displayed.
Press the ▲ or ▼ button to select Sound.
2
Result:
SRS TSXT
: Off
√
Auto Volume
: Off
√
Internal Mute
: Off
√
The options available in the Sound group are displayed.
d.
3
Press the ENTER button.
4
Press the ▲ or ▼ button to select Equalizer.
Press the ENTER button.
Result:
Move
The Equalizer menu is displayed with the current
option.
m.
6
R
L
+
+
0
0
-
-
100Hz 300Hz 1KHz 3KHz 10KHz
Press the ENTER button to confirm.
➢
Return
Equalizer
TV
Select the option to be adjusted by pressing the œ or √ button.
Press the ▲ or ▼ button until you reach the required setting.
5
Enter
√ Move
Adjust
Return
If you make any changes to the equalizer settings, the
sound standard is automatically switched to the Custom.
Setting the SRS TSXT
TruSurround XT is a patented SRS technology that solves the problem of
playing 5.1 multichannel content over two speakers. TruSurround delivers a
compelling, virtual surround sound experience through any two-speaker
playback system, including internal television speakers. It is fully compatible
with all multichannel formats.
1
Press the MENU button.
Result:
Result:
Press the ENTER button.
4
Press the … or † button until the SRS TSXT is selected.
Press the ENTER button.
5
Select Off, 3D Mono or Stereo by pressing the … or † button.
Press the ENTER button.
➢
: Custom
Equalizer
SRS TSXT
: Off
Auto Volume
: Off3D Mono
: Off Stereo
Internal Mute
Move
Enter
The options available in the Sound group are displayed.
3
➢
Mode
Off
The main menu is displayed.
Press the … or † button until the Sound is selected.
2
Sound
TV
TruSurround XT, SRS and (
) symbol
are trademarks of SRS Labs, Inc.
TruSurround XT technology is
incorporated under license from SRS
Labs, Inc.
You can also set these options simply by pressing the SRS
(
)button.
English - 35
Return
BP68-00478E-00Eng_0826
8/26/05
6:08 PM
Page 36
Adjusting the Volume Automatically
Each broadcasting station has its own signal conditions, and so it
is not easy for you to adjust the volume every time the channel is
changed. This feature lets you automatically adjust the volume of
the desired channel by decreasing the sound output when the
modulation signal is high or by increasing the sound output when
the modulation signal is decrease.
Sound
TV
Mode
: Custom
Equalizer
SRS TSXT
: Off
Auto Volume
: Off
Internal Mute
: Off
Off
On
1
Move
Enter
Return
Press the MENU button.
Result:
2
Press the ▲ or ▼ button to select Sound.
Result:
English - 36
The main menu is displayed.
The options available in the Sound group are displayed.
3
Press the ENTER button.
4
Press the ▲ or ▼ button to select Auto Volume.
Press the ENTER button.
5
Select Off or On by pressing the ▲ or ▼ button.
Press the ENTER button.
W
ex
so
d.
BP68-00478E-00Eng_0826
8/26/05
6:08 PM
Page 37
Enjoying the Sound of External Speakers
When using a device such as Home Theater or Amplifier with
external speakers, you can set “Internal Mute” to “On” to cutoff
sound from the TV’s internal speakers.
Sound
TV
Mode
: Custom
Equalizer
1
Press the MENU button.
Result:
The main menu is displayed.
SRS TSXT
: Off
Auto Volume
: Off
Internal Mute
: Off
Off
On
Press the … or † button until the Sound is selected.
2
Result:
The options available in the Sound group are displayed.
3
Press the ENTER button.
4
Press the … or † button until the Internal Mute is selected.
Press the ENTER button.
5
Select Off or On by pressing the ▲ or ▼ button.
6
Press the ENTER button to confirm.
➢
Move
Enter
The
/ or MUTE button doesn’t operate when the
Internal Mute is set to On. At this time, if you press the
/ or MUTE button, the message Not Available is
displayed.
English - 37
Return
BP68-00478E-00Eng_0826
8/26/05
6:08 PM
Page 38
Selecting the Sound Mode (depending on the model)
The “DUAL I-II” button displays/controls the processing and output
of the audio signal. When power is switched on, the mode is
automatically preset to either “Dual I ” or “Stereo”, depending on
the current transmission.
NICAM
Stereo
Type of broadcast
On-screen indication
Regular broadcast
(Standard audio)
Mono (Normal use)
Regular +
NICAM Mono
NICAM Mono ↔ Mono
NICAM Stereo
A2
Stereo
NICAM Dual 1/2
NICAM Dual 1 →
NICAM Dual 2 →
Mono
Regular broadcast
(Standard audio)
Mono
Bilingual or Dual I/II
Dual I ↔ Dual II
Stereo
➢
NICAM Stereo ↔ Mono
(Forced mono)
Stereo ↔ Mono
(Forced mono)
◆ If the receiving conditions deteriorate, listening will be
easier if the mode is set to the Mono.
◆ If the stereo signal is weak and an automatic switching
occurs, then switch to the Mono.
◆ When receiving a mono sound in the AV mode, connect
to the “AUDIO-L” input connector on the side of the
television. If the mono sound comes out only from left
speaker, press the DUAL I-II button.
English - 38
Y
b
w
BP68-00478E-00Eng_0826
8/26/05
6:08 PM
Page 39
Setting and Displaying the Current Time
You can set the television’s clock so that the current time is displayed
by pressing the “INFO “ button. You must also set the time if you
wish to use the automatic on or off timers.
➢
1
2
Press the MENU button.
Move
The main menu is displayed.
TV
4
The options available in the Setup group are displayed.
Press the ▲ or ▼ button to select Time. Press the ENTER button.
- - : - - am
√
: Off
√
On Timer
Off
√
Off Timer
Off
√
Sleep Timer
The options available in the Time group are displayed
with Clock Set is selected.
Move
Enter
Return
Press the ENTER button again.
Result:
6
Return
Time
Clock Set
Press the ENTER button.
Result:
5
Enter
Press the ▲ or ▼ button to select Setup.
Result:
3
√
√
√
√
√
√
√
Plug & Play
Language
: English
Time
Blue Screen
: Off
Melody
: On
Color Weakness : Off
PC
When pressing the power switch toward “OFF” (O) on the
side of the television, the clock setting will be reset.
Result:
Setup
TV
The Clock Set menu is displayed.
Press the œ or √ button to move to the Hour, Minute, or am/pm.
Set the current time by pressing the ▲ or ▼ button.
7
When you have finished, press the EXIT button to exit.
8
Press the INFO button to display the current time.
TV
Clock Set
Hour
12
√ Move
Minute am/pm
00
Adjust
English - 39
am
Return
BP68-00478E-00Eng_0826
8/26/05
6:08 PM
Page 40
Setting the Sleep Timer
You can select a time period of between 30 and 180 minutes after
which the television automatically switches to standby mode.
Setup
TV
Plug & Play
Language
: English
Time
Blue Screen
: Off
Melody
: On
Color Weakness : Off
PC
√
√
√
√
√
√
√
1
Press the MENU button.
Result:
Press the ▲ or ▼ button to select Setup.
2
Result:
Move
Enter
Clock Set
Sleep Timer
On Timer
Off Timer
Move
The options available in the Setup group are displayed.
Return
Time
TV
The main menu is displayed.
3
Press the ENTER button.
4
Press the ▲ or ▼ button to select Time. Press the ENTER button.
11 : 35 am
Result:
The options available in the Time group are displayed.
: Off
Off
√ 30
Off√
60
Off
90
120
150
180
Enter
5
Press the ▲ or ▼ button to select Sleep Timer. Press the
ENTER button.
6
Select the preset time intervals (Off, 30, 60, 90, 120, 150, 180) by
pressing the … or † button.
7
Press the ENTER button to confirm.
Return
➢
◆ You can also set these options simply by pressing the
SLEEP button.
◆ If the sleep timer is not yet set, Off is displayed.
If the sleep timer is already set, the remaining time
before which the television switches to Standby mode
is displayed.
➢
English - 40
Your TV automatically turns off when it receives no input
signal for 15 minutes or longer.
Y
BP68-00478E-00Eng_0826
8/26/05
6:08 PM
Page 41
Switching the Television On and Off Automatically
You can set the On or Off timers so that the television will:
◆ Switch on automatically and tune to the channel of your
choice at the time you select
d.
The first step is to set the television’s clock (refer to “Setting
and Displaying the Current Time” on page 39). If you have
not yet set the clock, the message Set the clock first
is displayed.
Move
1
Press the MENU button.
The main menu is displayed.
Result:
.
.
y
3
Press the ENTER button.
4
Press the ▲ or ▼ button to select Time. Press the ENTER button.
The options available in the Time group are displayed.
Result:
5
Press the ▲ or ▼ button to select On Timer.
Press the ENTER button.
The options available in the On Timer group are
Result:
displayed.
Enter
Clock Set
√
On Timer
Off
√
Off Timer
Off
√
Move
Enter
7
Hour
Minute am/pm
Press the MENU button.
The options available in the Time group are displayed
Result:
again.
00
P 1
Volume
Activation
10
No
√ Move
10
➢
Set the Off Timer as methods for On Timer setting.
Adjust
Return
Off Timer
TV
Hour
12
Press the ▲ or ▼ button to select Off Timer.
Press the ENTER button.
The options available in the Off Timer group are
Result:
displayed.
9
am
Prog.
To activate the On timer with the settings satisfied, select
Activation by pressing the œ or √ button,then select Yes by
pressing the ▲ or ▼ button.
8
Return
On Timer
TV
Select the Hour, Minute, am/pm, Prog.(programme number) or
Volume by pressing the œ or √ button.
Set these by pressing the ▲ or ▼ button.
√
11 : 35 am
: Off
Sleep Timer
12
6
Return
Time
TV
Press the ▲ or ▼ button to select Setup.
The options available in the Setup group are displayed.
Result:
2
√
√
√
√
√
√
√
Plug & Play
Language
: English
Time
Blue Screen
: Off
Melody
: On
Color Weakness : Off
PC
◆ Switch off automatically at the time you select
➢
Setup
TV
Minute am/pm
00
am
Activation
No
√ Move
Adjust
Auto Power Off
Auto Power OFF will automatically turn the TV off if you
do not operate any controls within 3 hours after the TV is
turned on by the timer. This function is available in the
timer “On” mode only and will prevent a leakage accident
or overheating caused by your TV being left on too long.
English - 41
Return
BP68-00478E-00Eng_0826
8/26/05
6:08 PM
Page 42
Setting the Blue Screen
If no signal is being received or the signal is very weak, a blue
screen automatically replaces the noisy picture background. If you
wish to continue viewing the poor picture, you must set the “Blue
Screen“ mode to “Off“.
Setup
TV
Plug & Play
Language
: English
Time
Blue Screen
: Off Off
Melody
: Off On
Color Weakness : Off
PC
Move
Enter
1
Press the MENU button.
Result:
Return
2
The main menu is displayed.
Press the ▲ or ▼ button to select Setup.
Result:
The options available in the Setup group are displayed.
3
Press the ENTER button.
4
Press the ▲ or ▼ button to select Blue Screen.
Press the ENTER button.
5
Select Off or On by pressing the ▲ or ▼ button.
6
Press the ENTER button.
Setting the Melody Sound
You can hear melody sound when the television is powered on or
off.
Setup
TV
Plug & Play
Language
: English
Time
Blue Screen
: Off
Melody
: Off Off
Color Weakness : Off On
PC
1
Press the MENU button.
Result:
2
Press the ▲ or ▼ button to select Setup.
Result:
Move
Enter
English - 42
The main menu is displayed.
The options available in the Setup group are displayed.
Return
3
Press the ENTER button.
4
Press the ▲ or ▼ button to select Melody.
Press the ENTER button.
5
Select Off or On by pressing the ▲ or ▼ button.
6
Press the ENTER button.
T
p
d.
BP68-00478E-00Eng_0826
8/26/05
6:08 PM
Page 43
Using the Color Weakness Enhancement Feature
This feature adjusts the Red, Blue or Green color to enhance the
picture according to the user's particular color weakness.
1
The main menu is displayed.
Press the ▲ or ▼ button to select Setup.
Result:
The options available in the Setup group are displayed.
3
Press the ENTER button.
4
Press the … or † button to select Color Weakness.
Press the ENTER button.
The options available in the Color Weakness
Result:
group are displayed.
5
Press the ENTER button again.
Press the … or † button to select On, then press the
ENTER button.
6
Press the … or † button to select the color you wish to adjust,
then press the ENTER button.
7
Press the œ or √ button to adjust to your preference.
8
Press the MENU or ENTER button to confirm.
√
√
√
√
√
√
√
Plug & Play
Language
: English
Time
Blue Screen
: Off
Melody
: On
Color Weakness : Off
PC
Press the MENU button.
Result:
2
Setup
TV
Move
TV
Enter
Return
Color Weakness
Color Weakness : Off
Red
Green
Blue
Move
TV
Off
On
Enter
0
0
0
Return
Color Weakness
√
0
0
0
Color Weakness : On
Red
Green
Blue
Move
Enter
Return
Color Weakness
Red 0
Move
œ √ Adjust
d.
English - 43
Return
BP68-00478E-00Eng_0826
8/26/05
6:08 PM
Page 44
Setting the Picture in PC Mode
➢
1
Setup
TV
√
√
√
√
√
√
√
Plug & Play
Language
: English
Time
Blue Screen
: Off
Melody
: On
Color Weakness : Off
PC
Move
Enter
Return
Preset to the PC mode by using the SOURCE button.
Press the MENU button.
Result:
2
Press the ▲ or ▼ button to select Setup.
Result:
PC
Coarse
Fine
Press the ENTER button.
4
Press the ▲ or ▼ button to select PC. Press the ENTER button.
√
Auto Adjustment
√
Select Coarse or Fine by pressing the ▲ or ▼ button.
Press the ENTER button.
6
Press the œ or √ button until you reach the required setting.
Press the ENTER button.
Result:
Move
Enter
Coarse
Return
The options available in the PC group are displayed.
5
50
0
Position
The options available in the Setup group are displayed.
3
Result:
TV
The main menu is displayed.
The PC menu is displayed again.
7
Press the ▲ or ▼ button to select Position.
Press the ENTER button.
Set to the required position by pressing the …/†/œ/√ button.
Press the ENTER button.
8
To adjust the screen quality and position automatically, select the
Auto Adjustment by pressing the ▲ or ▼ button.
50
Result:
Position
TV
9
Adjust
Enter
Auto Adjustment
English - 44
Return
The Auto Adjustment is displayed. The screen quality
and position are automatically adjusted.
Press the ENTER button.
U
co
so
BP68-00478E-00Eng_0826
6:08 PM
Page 45
Viewing an External Signal Source
Use the remote control to switch between viewing signals from
connected equipment, such as VCR, DVD, Set-Top box and the TV
source (broadcast or cable).
Input
TV
Source List
: TV
1
√
√
Edit Name
Press the MENU button.
d.
ty
8/26/05
Result:
The main menu is displayed.
Press the ▲ or ▼ button to select Input .
2
Result:
3
Press the ENTER button.
Result:
Move
The options available in the Input group are
displayed.
The options available in the Source List group are
displayed.
4
Press the ENTER button again.
5
Press the ▲ or ▼ button to select the signal source.
6
Press the ENTER button.
Return
Source List
TV
TV
Ext
AV1
AV2
AV3
S-Video1
S-Video2
† More
Move
➢
Enter
---HD STB
DVD
TV
DVD
Enter
You can also set these options simply by pressing the
SOURCE button. If you change the external source while
viewing, pictures might take a short period of time to be
switched.
English - 45
Return
BP68-00478E-00Eng_0826
8/26/05
6:08 PM
Page 46
Assigning Names to External Sources
This feature enables you to name the input source you have
connected.
Input
TV
Source List
√
: TV
√
Edit Name
1
Press the MENU button.
Result:
2
Move
Enter
Ext
AV1
AV2
AV3
S-Video1
S-Video2
S-Video3
† More
Move
: - - - -- - - : - - - -VCR
: - - - -DVD
Cable STB
:---HD STB
: - -Satellite
-STB
: - -AV
- -Receiver
:----
English - 46
The options available in the Input group are
displayed.
3
Press the ENTER button.
4
Press the ▲ or ▼ button to select Edit Name.
Press the ENTER button.
5
Press the ▲ or ▼ button to select the external source to be edited.
Press the ENTER button.
Result:
Enter
The main menu is displayed.
Press the ▲ or ▼ button to select Input .
Result:
Return
Edit Name
TV
M
te
Return
The device names available are listed.
VCR - DVD - Cable STB - HD STB - Satellite STB
- AV Receiver - DVD Receiver - Game Camcorder - DVD Combo - DHR (DVD HDD Recorder)
- PC - TV.
6
Select the required device by pressing the ▲ or ▼ button.
7
Press the ENTER button to confirm.
T
d.
)
BP68-00478E-00Eng_0826
8/26/05
6:08 PM
Page 47
Teletext Feature
Most television channels provide written information services via
teletext. Information provided includes:
◆ Television programme times
◆ News bulletins and weather forecasts
◆ Sports results
◆ Travel information
This information is divided into numbered pages (see diagram).
Part
A
B
C
D
E
F
➢
Contents
Selected page number.
Broadcasting channel identity.
Current page number or search indications.
Date and time.
Text.
Status information.
FASTEXT information.
Teletext information is often divided between several
pages displayed in sequence, which can be accessed by:
◆ Entering the page number
◆ Selecting a title in a list
◆ Selecting a colored heading (FASTEXT system)
English - 47
BP68-00478E-00Eng_0826
8/26/05
6:08 PM
Page 48
Displaying the Teletext Information
You can display Teletext information at any time on your television.
Teletext information to be displayed correctly,
☛ For
channel reception must be stable; otherwise:
◆ Information may be missing
◆ Some pages may not be displayed
1
Select the channel providing the Teletext service by pressing the
P or P button.
2
Press the TTX/MIX (
) button to activate the teletext mode.
Result:
The contents page is displayed. It can be redisplayed
at any time by pressing the
(index) button.
3
Press the TTX/MIX (
) button again.
The screen will be split into two. This Double Teletext
Result:
feature lets you view the actual broadcast and teletext
information separately on the screen.
4
If you wish to display the teletext information on a single screen,
press the TTX/MIX (
) button again.
5
To exit from the teletext display, press the TV (
) button.
Selecting Display Options
When you have displayed a Teletext page, you can select various
options to suit your requirements.
To display...
English - 48
Press the...
◆ Hidden text
(answers to quiz games, for example)
(reveal)
◆ The normal screen
(reveal) again
◆ A secondary page by entering its number
(sub-page)
◆ The broadcast when searching for a page
(cancel)
◆ The next page
(page up)
◆ The previous page
(page down)
◆ Double-size letters in the:
• Upper half of the screen
• Lower half of the screen
(size)
• Once
• Twice
◆ The normal screen
• Three times
Y
b
n.
BP68-00478E-00Eng_0826
8/26/05
6:08 PM
Page 49
Selecting a Teletext Page
You can enter the page number directly by pressing the numeric
buttons on the remote control.
1
Enter the three-digit page number given in the content by
pressing the corresponding numeric buttons.
Result:
The current page counter is incremented and the
page is then displayed. If the selected page is linked
with several secondary pages, the secondary pages
are displayed in sequence. To freeze the display on a
given page, press the
(hold) button. Press it again
to resume.
2
If the FASTEXT system is used by the broadcasting company,
the different topics covered on a Teletext page are color-coded
and can be selected by pressing the colored buttons on the
remote control.
Press the colored button corresponding to the topic that you wish
to select; the available topics are given on the status line.
Result:
The page is displayed with other colored information
that can be selected in the same way.
3
To display the previous or next page, press the corresponding
colored button.
4
To display the subpage, see the following steps.
◆ Press the
(sub-page) button.
Result:
The available subpages appear.
◆ Select the required sub-page. Sub-pages can be scrolled by
pressing the
or
button.
English - 49
BP68-00478E-00Eng_0826
8/26/05
6:08 PM
Page 50
Connecting to the External Input/Output
Rear of the TV
Side of the TV
(Input/Output)
(depending on the model)
(Input)
VCR
③
①
➃
Decoder /
Video game device
Video disc player
②
or
Satellite receiver
or
➄
① This end can be fitted with:
◆ Three RCA connectors (VIDEO + AUDIO-L and R)
② This end can be fitted with:
◆ A SCART connector
◆ Three RCA connectors (VIDEO + AUDIO-L and R)
◆ An S-Video connector and two audio RCA connectors (L+R)
If you have a second VCR and wish to copy cassettes tape, connect the source VCR to IN 1 (or IN 2)
and the target VCR to OUT so that you can redirect the signal from source VCR to target VCR.
If you have a decoder, connect the decoder to the VCR and the VCR to the television.
When you wish to record a programme, connect the receiver to IN 1 (or IN 2) and the VCR to OUT so
that you can redirect the signal from IN 1 (or IN 2) to OUT.
③
➃
➄
➢
Scart supports only TV signal output.
AV OUT
Viewing Source
.
Audio
Video
TV
Available.
Available.
AV1/AV2/AV3
Available.
Available.
S-Video1/S-Video2/S-Video3
Available.
Available. (Mixed Video)
Component1/ Component2/PC/HDMI
Not available.✽
Not available.
✽ It is available when the Internal Mute is set to On. For details, refer to “Enjoying the Sound of
External Speakers” on page 37.
English - 50
BP68-00478E-00Eng_0826
8/26/05
6:08 PM
Page 51
Connecting to the S-Video Input
The “S-VIDEO” and “AUDIO-L/R” connectors are used for equipment with an S-Video output, such
as a camcorder or VCR.
Rear of the TV
and
Camcorder
VCR
Side of the TV
and
➢
To play picture and sound, both the S-VIDEO and AUDIO-L/R connectors must be used.
English - 51
BP68-00478E-00Eng_0826
8/26/05
6:08 PM
Page 52
Connecting to the Digital Input
The “HDMI/DVI IN” and “AUDIO-L/R” connectors are used for equipment with a digital output.
By inputting a high-bandwidth digital content protection high-definition picture source to these
jacks, high-definition pictures can be displayed on the screen in their digital forms.
Rear of the TV
Personal Computer
and
or
DVD
Rear of the TV
DTV receiver
➢
The “HDMI/DVI IN” does not support the Analog R (red), G (green) and B (blue) signals.
☛
English - 52
Please check if the HDMI source’s power is on, in case that
you fail to select HDMI from the “Source List” even after you
connected the cable of the HDMI source (DTV Set-Top Box,
DVD, etc.) to TV.
BP68-00478E-00Eng_0826
8/26/05
6:08 PM
Page 53
Connecting to the Component Input
Rear of the TV
DVD
DTV receiver
➢
The COMPONENT IN 1 (or COMPONENT IN 2) connectors are used for equipment with a DVD or
DTV receiver output. (480i, 480p, 576i, 576p, 720p, 1080i)
Connecting to the PC Input
The “PC” (video) and “AUDIO-L/R” connectors are used for interfacing with your PC.
Rear of the TV
u
Personal Computer
and
English - 53
BP68-00478E-00Eng_0826
8/26/05
6:08 PM
Page 54
Setting up Your PC Software (Windows only)
The Windows display-settings for a typical computer are shown below. But the actual screens on your
PC will probably be different, depending upon your particular version of Windows and your particular
video card. But even if your actual screens look different, the same, basic set-up information will apply
in almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.)
B
T
1 Right click the mouse on the Windows Desktop,
then click on Properties. The Display Dialog-Box
will be displayed.
2 Click on Settings, then set the Display Mode
with reference to the Display Modes Table. You
do not need to change the Colours settings.
3 Click on Advanced. A new settings dialog box
will be displayed.
4 Click on the Monitor tab, then set the Screen
Refresh Rate with reference to the Display
Modes Table. Set the Vertical Frequency and
Horizontal Frequency individually if you can do
so instead of setting the Screen Refresh Rate.
2
3
5 Press the OK button, close the window, then
◆
◆
◆
◆
press the OK button on the Display Registration
Information window. Automatic re-booting may
commence at this moment.
6 Shutdown the PC, and connect it to your TV.
(See page 53)
4
5
English - 54
➢
◆ The actual screens on your PC may look
different, depending on your particular
version of Windows and the type of your
PC.
◆ When you use your TV as a PC monitor, it
supports Colours up to 32 bits.
◆ In this case, the display on the TV may look
different depending on your particular
version of Windows or the PC
manufacturer.
◆ When connecting a PC (including the DVI
connection), you must set it to the display
settings that are supported by the TV.
Otherwise, the message Out of input
range will be displayed.
◆
◆
◆
◆
◆
◆
BP68-00478E-00Eng_0826
k
6:08 PM
Page 55
PC/HDMI(DVI) Input Mode
Both screen position and size will vary depending on the type of PC monitor and its resolution.
The table below shows all of the display modes that are supported:
Standard
Resolution
VGA
720 x 400
640 x 480
SVGA
800 x 600
XGA
832 x 624
1024 x 768
DTV
(EIA/CEA861-B)
720 x 576
720 x 480
1280 x 720p
x
n
8/26/05
1920 x 1080i
◆
◆
◆
◆
Horizontal
frequency (kHz)
Vertical
frequency (Hz)
Pixel Clock
(MHz)
Sync Polarity
(H/V)
31.47
31.47
35.00
37.86
37.50
43.27
35.16
37.88
48.08
46.87
53.67
49.73
48.36
56.40
60.02
31.25
31.50
37.50
45.00
28.125
33.75
70.00
60.00
66.70
72.80
75.00
85.00
56.30
60.30
72.20
75.00
85.10
74.60
60.00
70.10
75.00
50.00
60.00
50.00
60.00
50.00
60.00
28.322
25.175
30.24
31.50
31.50
36.00
36.00
40.00
50.00
49.50
56.25
57.284
65.00
75.00
78.75
27.00
27.027
74.25
74.25
74.25
74.25
-/-/+
-/-/-/-/-+/+/++/+
+/+
+/+
-/+
-/-/+/X
X
X
X
X
X
The interlace mode is not supported.
The television might operate abnormally if a non-standard video format is selected.
The 4:3 mode does not work with input signals from “720 x 400”.
640 x 480 PC signal is basically recognized as 720 x 480 TV signal in PC/HDMI mode.
Select ‘PC’ in Edit Name to recognize the signal as 640 x 480 PC signal.
Refer to Assigning Names to External Sources on page 46.
Notes
◆ The text quality of PC screen is optimum in the XGA mode (1024 x 768), the full size displayed PC
mode is optimum in the SVGA mode (800 x 600).
◆ When this television is used as a PC display, 24-bit color is supported (over 16 million colors).
◆ Your PC display screen might appear different depending on the manufacturer (and your particular version of
Windows). Check your PC instruction book for information about connecting your PC to a television.
◆ If a vertical and horizontal frequency-select mode exists, select 60Hz (vertical) and 31.5kHz (horizontal).
In some cases, abnormal signals (such as stripes) might appear on the screen when the PC power is turned
off (or if the PC is disconnected). If so, press the SOURCE button to enter the Video mode. Also, make sure
that the PC is connected.
◆ When connecting a notebook PC to the television, make sure that the PC screen is displayed through only the
television (Otherwise, random signals might appear).
◆ When horizontal synchronous signals seem irregular in PC mode, check PC power saving mode or cable
connections.
English - 55
BP68-00478E-00Eng_0826
8/26/05
6:08 PM
Page 56
Setting Up Your Remote Control
This TV’s remote control can operate VCR, CATV , DVD, or
Set-top box (STB), in addition to controlling the TV.
➢
VCR
The remote control might not be compatible with all DVD
Players, VCRs and Cable boxes.
1
Turn off your VCR, Cable box, DVD or STB.
2
Press the SELECT button. Mode is changed whenever SELECT
button is pressed.
3
Press the POWER ( ) button on the remote control.
The component you select should turn on. If it turns on, your remote
control is now set correctly.
4
Once your remote control is set up, press the SELECT button any
time you want to use the remote control to operate your VCR,
Cable box, DVD or STB.
➢
➢
➢
➢
English - 56
When your remote control is in the VCR, CATV, DVD or
STB mode, the volume buttons still control your television’s
volume.
To program the cable receiver controls:
◆ Press the SELECT button to select CATV.
◆ Point the remote control at the cable receiver and press
the SET button. Then press the company code number(s)
for the component in page 58.
Ex) If the component is manufactured by Oak, press 026.
To program the VCR controls:
◆ Press the SELECT button to select VCR.
◆ Point the remote control at the VCR and press the SET.
button. Then press the company code number(s) for the
component in page 57 or 58.
To program the DVD controls:
◆ Press the SELECT button to select DVD.
◆ Point the remote control at the DVD and press the SET.
button. Then press the company code number(s) for the
component in page 58.
D
e
y
BP68-00478E-00Eng_0826
8/26/05
6:08 PM
Page 57
Programming the Remote Control for Other Components
VCR Remote Control Codes
Admiral
020
Marantz
Aiwa
025
Marta
Akai
004, 027, 032
Audio Dynamics
007, 026
007, 008, 018, 021, 026, 036, 037, 062
006
MEI
Memorex
021
006, 021, 024, 025
Bell&Howell
018
MGA
034
Broksonic
022
Midland
005
002, 003, 006, 008, 015, 055
Minolta
019, 041
Candle
Canon
021, 056
Citizen
002, 003, 006, 008, 015, 055
Colortyme
Craig
Curtis Mathes
007
002, 024
002, 007, 008, 017, 021, 025, 056, 064,
066
Daewoo
DBX
003, 010, 011, 012, 013, 014, 015, 016
007, 026
Mitsubishi
019, 034, 041, 046
Montgomery Ward
MTC
Multitech
NEC
020
002, 025
002, 005, 025, 038
007, 008, 018, 026, 037, 062, 064
Optimus
Panasonic
Pentax
020
021, 056, 071, 072
019, 041
Dimensia
017
Pentex Research
Dynatech
034
Philco
Emerson
001, 003, 006, 021, 022, 025, 030, 032,
Philips
034, 040, 047, 050, 052, 060, 063, 065,
Pioneer
019, 026, 039, 053
066, 067, 069
Portland
015, 049, 055
008
021, 036, 056, 059
021, 036
Fisher
018, 024, 028, 029, 048, 051, 061
PROSCAN
017
Funai
025
Quartz
018
002, 005, 017, 021, 056
Quasar
General Electric
Go Video
LG (Goldstar)
Harman Kardon
Hitachi
Instant Replay
JC Penney
JVC
Kenwood
002
006, 018, 020, 021, 024, 025, 029,
RCA
002, 017, 019, 021, 035, 041, 043,
006, 007, 008, 009, 010
007
034, 048, 056
019, 025, 041, 042
021
021, 056
Radio Shack/Realistic
057, 068
Samsung
000, 001, 002, 003, 004, 005
002, 007, 018, 019, 021, 026, 037, 041,
Sansui
026
054, 056
Sanyo
018, 024
007, 008, 018, 021, 026, 037
Scott
003, 047, 052, 067
007, 008, 018, 026, 037
Sears
006, 018, 019, 024, 028, 029, 041,
KLH
070
Lioyd
025
Sharp
020, 034, 045, 015
Logik
038
Shimom
027, 033, 038, 058
025
Signature
LXI
Magnavox
021, 036, 056, 059
048, 051
Sony
025
027, 033, 044
English - 57
BP68-00478E-00Eng_0826
8/26/05
6:08 PM
Page 58
Programming the Remote Control for Other Components
VCR Remote Control Codes (continued)
Sylvania
Symphonic
Tandy
021, 025, 036, 056, 059
025
018, 025
Totevision
006
Victor
Tatung
037
Video Concepts
Technics
Teknika
TMK
Toshiba
025, 037, 068
021
002
007, 026
Vector Research
Tashika
Teac
002, 006
Unitech
026
007, 026
002
Videosonic
Wards
002, 003, 006, 019, 020, 021, 024, 025,
006, 021, 025, 031
066
003, 019, 029, 051, 052
034, 038, 041
Yamaha
Zenith
007, 008, 018, 026, 037
023, 027, 033, 073
Cable Box (CATV) Remote Control Codes
Anvision
GI
017, 018
041
Regency
SA
015, 023
042, 043
Hamlin
003, 024, 031
Hitachi
025, 030
Scientific Atlanta
Jerrold
038, 039
Sprucer
022
025, 030
Macom
Magnavox
Oak
Panasonic
Samsung
000, 001, 002, 003, 004, 005, 006, 007
042, 043
Stargate 2000
036
019, 023, 028
Sylvania
016
026
Texscan
016
Tocom
032
003, 022, 027, 037, 044
Philips
019, 021, 023, 028
Universal
033, 034
Pioneer
004, 018, 020, 044
Viewstar
019, 021, 023, 028
RCA
Regal
014, 022, 040
003
Wamer amex
Zenith
046
017, 029, 035, 037, 045
DVD Remote Control Codes
Samsung
LG (Goldstar)
006
JVC
002
Sony
007
PROSCAN/RCA
003
Denon
008
Panasonic
005
Curtis Mathes
009
English - 58
000, 001
6
BP68-00478E-00Eng_0826
8/26/05
6:08 PM
Page 59
Replacing the Lamp
1
Unplug TV, then use a screwdriver to remove the screw.
2
Remove the Lamp cover.
3
Remove the screws securing the Lamp by using a screwdriver.
4
Separate the Lamp from the engine by holding the handle and
pulling it out
5
To reinstall the Lamp, follow these steps in reverse order.
6
6
6
7
3
3
3
7
3
6
6
6
4
8
6
6
7
8
◆ Why do I need to replace the lamp?
The lamp used in a projection TV has a limited lifespan. For
the best screen quality it needs to be replaced
periodically. After replacing the lamp, the screen quality will
be bright and clear as new.
◆
When do I need to replace it?
It should be replaced when the screen becomes darker, less
clear or when all three LEDs on the front (TIMER, LAMP and
STAND BY/TEMP) are flashing.
◆ Check before lamp replacement
- Turn the power off and wait for 30 minutes before
replacing the lamp as it will be hot.
- The lamp must be the same code to avoid damage to the
TV. The lamp code is indicated on the lamp case or the
side of TV.
- After checking the lamp code, give to the store where you
purchased the TV or to a Samsung Service Center.
◆
Caution
- Do not touch the glass part of the lamp with your bare
hands nor insert any foreign object inside the cover as it
may cause poor screen quality, electric shock or fire.
- Do not place the old lamp near flammable objects or
within the reach of children.
- Don't allow dirt or dust to accumulate inside the lamp
cover or on the lamp. A dirty cover or lamp can catch fire,
explode and cause electric shock.
- If a new lamp is improperly handled, the screen quality
can be affected and the expected lifespan of the lamp can
be reduced.
- Be sure to tighten the lamp cover on the TV after changing
the lamp. Note that the TV will not function if the lamp
cover is not securely attached. Please tighten the holding
screw on the lamp cover after it has been attached to the
TV.
English - 59
BP68-00478E-00Eng_0826
8/26/05
6:08 PM
Page 60
Troubleshooting: Before Contacting Service Personnel
Before contacting Samsung after-sales service, perform the following simple checks.
If you cannot solve the problem using the instructions below, note the model and serial number of the
television and contact your local dealer.
No sound or picture
Normal picture but no sound
T
su
◆ Check that the mains lead has been connected to a wall socket.
◆ Check that you have pressed the power switch toward “OFF” (O)
or the POWER ( ) button on the remote control or the front of the
television).
◆ Check the picture contrast and brightness settings.
◆ Check the volume.
M
◆ Check the volume.
◆ Check whether the volume MUTE button on the remote control has
been pressed.
◆ Check that the Internal Mute is set to On.
A
No picture or black and white picture
◆ Adjust the color settings.
◆ Check that the broadcast system selected is correct.
Sound and picture interference
◆ Try to identify the electrical appliance that is affecting the television,
then move it further away.
◆ Plug your television into a different mains socket.
Blurred or snowy picture,
distorted sound
◆ Check the direction, location and connections of your aerial.
This interference often occurs due to the use of an indoor aerial.
Remote control malfunctions
◆ Replace the remote control batteries.
◆ Clean the upper edge of the remote control (transmission window).
◆ Check the battery terminals.
C
T
D
(
W
➢
English - 60
BP68-00478E-00Eng_0826
8/26/05
6:08 PM
Page 61
Technical Specifications
The descriptions and characteristics in this booklet are given for information purposes only and are
subject to modification without notice.
Model name
SP42L6HX
SP46L6HX
SP50L6HX
SP56L6HX
SP61L6HX
SP67L6HX
Color systems
PAL, SECAM, NTSC3.58, NTSC4.43
C
TV standards
BG, DK, I, M
T
Audio output power
15 W + 15 W
A
Demensions
(W x D x H)
Weight
999 x 331.3 x 755.5 mm 1088 x 342.5 x 814.2 mm 1182 x 354 x 869.7 mm 1330 x 388.5 x 961.7 mm 1446 x 466.5 x 1056.2 mm 1584 x 502.5 x 1144.5 mm
28 kg
30.3 kg
33 kg
36.7 kg
42.9 kg
49 kg
,
Checking Parts
Sold Separately
Replacement Lamp
Owner’s Instructions
Remote Control/
AAA Batteries
➢
For purchasing a replacement lamp, ask at a
nearby service center.
• Use authorized lamps only. The company
cannot guarantee the quality of the product if
an unauthorized lamp is used.
When installing the product, make sure to keep
it away from the wall (more than 10cm) for
ventilation purposes.
• Poor ventilation may cause an increase
in the internal temperature of the product,
resulting in a shortened component life
and degraded performance.
English - 61
W
BP68-00478E-00Eng_0826
8/26/05
Memo
English - 62
6:08 PM
Page 62
BP68-00478E-00Eng_0826
8/26/05
6:08 PM
Page 63
Memo
English - 63
BP68-00478E-00Eng_0826
8/26/05
6:08 PM
Page 64
- AFTER SALES SERVICE
- Do not hesitate to contact your retailer or service agent
if a change in the performance of your product indicates
that a faulty condition may be present.
ELECTRONICS
BP68-00478E-00