Samsung 32" CRT TV WS32Z306V

AA68-03660A-00Eng
6/7/05
4:46 PM
Page 1
COLOUR
TELEVISION
Owner’s Instructions
Before operating the unit,
please read this manual thoroughly,
and retain it for future reference.
ON-SCREEN MENUS
PICTURE IN PICTURE (OPTION)
TELETEXT
Register your product at www.samsung.com/global/register
AA68-03660A-00Eng
6/7/05
4:46 PM
Page 2
AA68-03660A-00Eng
6/7/05
4:46 PM
Page 3
Contents
◆ CONNECTING AND PREPARING YOUR TELEVISION
■
■
■
■
■
■
■
■
■
■
View of Your Television (depending on the model) .......................................
Infrared Remote Control ................................................................................
Inserting the Batteries in the Remote Control................................................
Connecting to an Aerial or Cable Television Network ...................................
Switching Your Television On and Off...........................................................
Placing Your Television in Standby Mode .....................................................
Becoming Familiar with the Remote Control .................................................
Plug & Play Feature.......................................................................................
Viewing the Demonstration............................................................................
Choosing Your Language..............................................................................
5
6
8
8
9
9
10
11
12
12
◆ SETTING THE CHANNELS
■
■
■
■
■
■
Storing Channels Automatically.....................................................................
Sorting the Stored Channels .........................................................................
Storing Channels Manually............................................................................
Skipping Unwanted Channels .......................................................................
Assigning Names to Channels ......................................................................
Fine Tuning Channel Reception ....................................................................
13
14
15
17
18
19
◆ USING YOUR TELEVISION
■
■
■
■
■
■
■
■
■
■
■
■
■
■
Using the LNA (Low Noise Amplifier) Feature (depending on the model).....
Changing the Picture Standard .....................................................................
Customizing the Picture Settings...................................................................
Selecting the Picture Size (depending on the model)....................................
Selecting the Digital NR.................................................................................
Using the Tilt Control Feature........................................................................
Setting the Blue Screen.................................................................................
Freezing the Current Picture .........................................................................
Changing the Sound Standard ......................................................................
Adjusting the Sound Settings ........................................................................
Extra Sound Settings (depending on the model)...........................................
Selecting the Sound Mode (depending on the model) ..................................
Selecting the Melody .....................................................................................
Setting and Displaying the Current Time.......................................................
20
21
22
23
24
25
25
26
26
27
28
29
30
31
English - 3
AA68-03660A-00Eng
6/7/05
4:46 PM
Page 4
➢
Contents (continued)
◆ USING YOUR TELEVISION (continued)
■
■
■
■
■
Setting the Sleep Timer .................................................................................
Switching the Television On and Off Automatically .......................................
Setting the Preferred Volume Level/Channel ................................................
Viewing an External Signal Source/Edit Name (depending on the model)....
Viewing the Picture In Picture (PIP) (depending on the model) ....................
32
33
34
35
36
◆ USING THE TELETEXT FEATURE
■
■
■
■
■
Teletext Feature ............................................................................................
Displaying the Teletext Information ...............................................................
Selecting a Page by Number.........................................................................
Using FLOF to Select a Page........................................................................
Storing Teletext Pages ..................................................................................
39
39
40
41
41
◆ ADDITIONAL INFORMATION ON CONNECTIONS
■
■
■
■
Connecting to the External Input/Outputs (depending on the model)............
Connecting to the RCA Input (depending on the model)...............................
Connecting to the S-Video Input (depending on the model)..........................
Viewing Pictures From External Sources ......................................................
42
43
43
44
◆ RECOMMENDATIONS FOR USE
■
■
Automatic Degaussing to Remove Colour Patches.......................................
Troubleshooting: Before Contacting Service Personnel................................
Symbols
Press
English - 4
☛
Important
➢
Note
45
45
AA68-03660A-00Eng
6/7/05
4:46 PM
Page 5
View of Your Television (depending on the model)
➢
The actual configuration on your TV may be different, depending on
your model.
Control Panels
7
1
6
6
5
4
3
2
5
4
7
6
5
4
2
3
1
1
3
7
2
5
6
6
4
5
4
3
1
2
2
3
1
1) Power On/Off
5) Volume Adjustment
2) Standby Indicator
6) Menu Display
3) Remote Control Sensor
7) Input source selection
4) Channel Selection
Connection Panels
Rear of the TV
Side of the TV
S-Video Input
Video Input
Audio Input (R, L)
SCART Audio/
Video Input/Output
75Ω Coaxial Connector for Aerial/Cable Network
English - 5
AA68-03660A-00Eng
6/7/05
4:46 PM
Page 6
Infrared Remote Control
TELEVISION STAND-BY
DIRECT CHANNEL SELECTION
ONE/TWO-DIGIT
CHANNEL SELECTION
VOLUME INCREASE
TEMPORARY SOUND SWITCH-OFF
VOLUME DECREASE
SWITCH REPEATEDLY
BETWEEN THE LAST TWO
CHANNELS DISPLAYED
NEXT CHANNEL
EXTERNAL INPUT SELECTION
PREVIOUS CHANNEL
INFORMATION DISPLAY
M
MENU DISPLAY
MOVE TO THE REQUIRED
MENU OPTION/
ADJUST AN OPTION VALUE
RESPECTIVELY
SOUND MENU DISPLAY
EXIT FROM ANY DISPLAY
CONFIRM YOUR CHOICE
SOUND EFFECT SELECTION
TURBO SOUND
PICTURE EFFECT SELECTION
PICTURE SIZE
SOUND MODE SELECTION
STILL PICTURE
AUTOMATIC SWITCH-OFF
➢
English - 6
The performance of the remote control may be affected by bright light.
AA68-03660A-00Eng
6/7/05
4:46 PM
Page 7
Infrared Remote Control (continued)
TELETEXT PAGE HOLD
TELETEXT NEXT PAGE
TELETEXT MODE SELECTION
(LIST/FLOF)
TELETEXT PREVIOUS PAGE
SUB PICTURE(PIP)
NEXT CHANNEL
TELETEXT REVEAL
TELETEXT DISPLAY/
MIX BOTH TELETEXT INFORMATION
AND THE NORMAL BROADCAST
PROGRAMME
SELECTION BY NAME
SUB PICTURE(PIP)
LOCATION SELECTION
SUB PICTURE(PIP) SIZE SELECTION
SUB PICTURE(PIP) PREVIOUS
CHANNEL
FASTEXT TOPIC SELECTION
TELETEXT SUB-PAGE
PIP ON/OFF
TELETEXT STORE
TELETEXT SIZE SELECTION
SUB PICTURE(PIP)
SOURCE SELECTION
INTERCHANGE THE MAIN AND SUB
PICTURE (PIP)
English - 7
AA68-03660A-00Eng
6/7/05
4:46 PM
Page 8
Inserting the Batteries in the Remote Control
You must insert or replace the batteries in the remote control when
you:
T
◆ Purchase the television
◆ Find that the remote control is no longer operating
correctly
1
Remove the cover on the rear of the remote control by pressing
the symbol ( ) downwards and then pulling firmly to remove it.
2
Insert two R03, UM4, “AAA” 1.5V or equivalent batteries taking
care to respect the polarities:
◆ - on the battery against - on the remote control
◆ + on the battery against + on the remote control
3
Replace the cover by aligning it with the base of the remote
control and pressing it back into place.
Connecting to an Aerial or Cable Television Network
To view television channels correctly, a signal must be received by
the set from one of the following sources:
Y
◆ An outdoor aerial
◆ A cable television network
◆ A satellite network
Rear of the TV
or
Cable Television
Network
English - 8
1
In the first three cases, connect the aerial or network input cable to
the 75Ω coaxial socket on the rear of the television.
2
If you are using an indoor aerial, you may need to turn it when
tuning your television until you obtain a picture that is both sharp
and clear.
For further details, refer to:
◆ “Storing Channels Automatically ” on page 13
◆ “Storing Channels Manually” on page 15
T
v
n
o
AA68-03660A-00Eng
6/7/05
4:46 PM
Page 9
Switching Your Television On and Off
The mains lead is attached to the rear of your television.
1
Plug the mains lead into an appropriate socket.
➢
2
The main voltage is indicated on the rear of the television
and the frequency is 50 or 60Hz.
Press the “
Result:
3
” button (On/Off) on the front of the television.
The Standby indicator on the front of the television
lights up.
Press the POWER (
television on.
Result:
) button on the remote control to switch the
The programme that you were watching last is
re-selected automatically.
you have not yet stored any channels, No clear picture
➢ Ifappears.
Refer to “Storing Channels Automatically” on page
13 or “Storing Channels Manually” on page 15.
4
To switch your television off, press the “
” button (On/Off) again.
Placing Your Television in Standby Mode
Your television can be placed in Standby mode, in order to reduce:
◆ Power consumption
◆ Wear of the cathode ray tube
The Standby mode can be useful when you wish to interrupt
viewing temporarily (during a meal, for example).
1
Press the POWER (
Result:
2
) button on the remote control.
The screen is turned off and the Standby indicator on
the front of the television lights up in red.
To switch the television back on, simply press the POWER (
button again.
also switch on by pressing the TV (
➢ You, orcannumeric
buttons.
☛
), P
)
or
Do not leave your television in Standby mode for long
periods of time (when you are away on holiday, for
example). Turn your television off by pressing the “ ”
button (On/Off) on the front of the television. It is best to
unplug the set from the mains and aerial.
English - 9
AA68-03660A-00Eng
6/7/05
4:46 PM
Page 10
Becoming Familiar with the Remote Control
The remote control is used mainly to:
◆ Change channels and adjust the volume
◆ Set up the television using the on-screen menu system
The following table presents the most frequently used buttons and
their functions.
Button
Viewing Function
Menu Function
Used to display the next
stored channel.
-
Used to display the previous stored channel.
to
-/--
PRE-CH
Used to select a channel numbered ten or over.
Press this button, and the “--” symbol is displayed.
Enter the two-digit channel number.
Press the PRE-CH button. The TV will switch to the last
channel viewed.
To quickly switch between two channels that are far apart,
tune to one channel, then use the number button to select
second channel. Then, use the PRE-CH button to quickly
alternate between them.
Used to increase the
volume.
-
Used to decrease the
volume.
-
MUTE
Used to switch the sound off temporarily.
To turn the sound back on, press this button again, or
press the
or
button.
MENU
Used to display the
on-screen menu system.
Used to return to the previous
menu or normal viewing.
-
Used to:
◆ Display a submenu
containing selections for
the current menu option
◆ Increase/decrease a
menu option value
-
Used to confirm your choice.
-
Used to exit from the menu
system and return to normal
viewing directly.
EXIT
TV
English - 10
Used to display the corresponding channels.
➢
Used to switch the
television on when it is
in Standby mode.
W
se
la
AA68-03660A-00Eng
6/7/05
4:46 PM
Page 11
Plug & Play Feature
When the television is initially powered on, three basic customer
settings proceed automatically and subsequently: setting the
language, channel and clock.
1
If the television is in Standby mode, press the POWER (
on the remote control.
Result:
2
➢
Move
Skip
Check antenna input.
œ √ Move
Skip
Auto Store
TV
Country
Search
œ
√
Belgium
: -/+
The Time menu is displayed with Clock selected.
Refer to “Storing Channels Automatically” on page 13.
Move
When you have finished, press the MENU (
œ √ Adjust
Skip
TV
Time
Clock
-- : -Sleep Timer
: Off
On Timer
-- : -- Off
Off Timer
-- : -- Off
On Timer Volume
: 10
On Timer Channel : 1
Refer to “Setting and Displaying the Current Time” on page
31.
Result:
7
The Auto Store menu is displayed with Country is
selected.
Press the œ or √ button to move to the hour or minute. Set the
hour or minute by pressing the ▲ or ▼ button.
➢
Srpski
Hrvatski
Român™
Magyar
Polski
êÛÒÒÍËÈ
Å˙΄‡ÒÍË
Türkçe
Norsk
Dansk
Suomi
The message Check antenna input. is displayed.
Select your country by pressing the œ or √ button. To search the
channels, select Search by pressing the ▲ or ▼ button, and then
press the œ or √ button. Press the MENU ( ) button to stop the
search.
➢
6
The message Plug & Play is displayed. It flickers for
a little while and then Language menu is automatically
displayed.
Make sure that the antenna is connected to the TV.
Press the œ or √ button.
Result:
5
Language
English
Deutsch
Français
Nederland
Español
Italiano
Svenska
Português
∂ÏÏËÓÈο
âe‰tina
If any language is not selected on the Language menu, the
Language menu will disappear about 30 seconds later.
Result:
4
TV
Select the appropriate language by pressing the ▲ or ▼ button.
Press the MENU ( ) button to enter the language.
Result:
3
) button
Plug & Play
) button.
The message Enjoy your watching. is displayed,
and then the channel which has been stored will be
activated.
Move
œ √ Adjust
Skip
If you want to reset this feature...
Enjoy your watching.
1
Press the MENU (
2
Press the ▲ or ▼ button to select Setup, and then press the
ENTER ( ) button.
Result:
3
The Plug & Play is selected.
Press the ENTER (
Result:
) button.
) button again.
This feature starts with the message Plug & Play
is displayed.
TV
Setup
Plug & Play
Language : English
Time
Blue Screen
Melody
Demonstration
Move
Enter
English - 11
√
√
: Off
: On
√
Return
AA68-03660A-00Eng
6/7/05
4:46 PM
Page 12
Viewing the Demonstration
To become familiar with the various menus provided by your
television, you can view the inbuilt demonstration.
1
Press the MENU (
Result:
2
Setup
√
Plug & Play
Language : English
Time
Blue Screen
Melody
Demonstration
Move
The options available in the Setup group are
displayed.
3
Press the ENTER (
4
Press the ▲ or ▼ button to select Demonstration.
5
Press the ENTER (
√
Result:
➢
: Off
: On
√
Enter
The main menu is displayed.
Press the ▲ or ▼ button to select Setup.
Result:
TV
) button.
) button.
) button.
Each of the menu options is displayed in turn.
When you wish to exit from the demonstration, press the
EXIT ( ) button on the remote control.
Return
Choosing Your Language
TV
When you start using your television for the first time, you must
select the language which will be used for displaying menus and
indications.
Setup
Plug & Play
Language œ English
Time
Blue Screen
Melody
Demonstration
√
√
√
: Off
: On
1
Result:
Enter
TV
Language
Move
The main menu is displayed.
Press the ▲ or ▼ button to select Setup.
Return
Result:
English
Deutsch
Français
Nederland
Español
Italiano
Svenska
Português
∂ÏÏËÓÈο
âe‰tina
) button.
√
2
Move
Press the MENU (
Srpski
Hrvatski
Român™
Magyar
Polski
êÛÒÒÍËÈ
Å˙΄‡ÒÍË
Türkçe
Norsk
Dansk
Suomi
The options available in the Setup group are
displayed.
3
Press the ENTER (
4
Press the ▲ or ▼ button to select Language.
5
Press the ENTER (
Result:
) button.
) button.
The options available in the Language group are
displayed.
Return
6
English - 12
Select the appropriate language by pressing the ▲ or ▼ button
repeatedly.
Y
av
p
p
c
AA68-03660A-00Eng
6/30/05
11:13 AM
Page 13
Storing Channels Automatically
You can scan for the frequency ranges available to you (and
availability depends on your country). Automatically allocated
programme numbers may not correspond to actual or desired
programme numbers. However you can sort numbers manually and
clear any channels you do not wish to watch.
1
Press the MENU (
Result:
2
) button.
The options available in the Channel group are
displayed.
Return
7
Press the œ or √ button to start the search.
➢
Country
Search
The options available in the Auto Store group are
displayed with Country is selected.
Select your country by pressing the œ or √ button. The countries
are displayed in the following order: Belgium - Germany - Spain France - Italy - Netherlands - Sweden - Switzerland - United
Kingdom - Others - Eastern Europe
Result:
Move
œ
√
Belgium
: -/+
œ √ Adjust
TV
Return
Auto Store
Country
Search
The horizontal bar is displayed, and then channels are
stored in an order which reflects their positions in the
frequency range. Finally, the search will end
automatically.
Move
: Belgium
œ -/+
œ √ Search
√
Return
To stop the search before it has finished, press the MENU
( ) button.
When searching and storing are complete, the Sort menu is
displayed.
P 1 C-- ----106 MHz
◆ To sort the stored channels into the desired numerical order,
go to Step 6 of the “Sorting the Stored Channels” procedure
on page 14.
◆ To exit from the channel store function without sorting the
channels, press the MENU ( ) button repeatedly until the
menus disappear.
When the channels have been stored, you can:
◆
◆
◆
◆
◆
Auto Store
) button again.
Press the ▲ or ▼ button to select Search.
9
Enter
TV
) button.
6
8
Move
The Auto Store selected.
Press the ENTER (
Result:
5
√
√
√
√
√
Auto Store
Manual Store
Add/Delete
Sort
Name
† More
The main menu is displayed.
Press the ENTER (
Result:
4
Channel
Press the ▲ or ▼ button to select Channel.
Result:
3
TV
Sort them in the order required (refer to page 14)
Skip Unwanted Channels (refer to page 17)
Assign a name to the stored channels (refer to page 18)
Fine tune channel reception if necessary (refer to page 19)
Activate the Digital Noise Reduction feature (refer to page 24)
7 %
Return
Sort
TV
From
To
Store
Move
œ P 1 ----- √
: P-- ----: ?
œ √ Adjust
English - 13
Return
AA68-03660A-00Eng
6/30/05
11:12 AM
Page 14
Sorting the Stored Channels
TV
This operation allows you to change the programme numbers of
stored channels. This operation may be necessary after using auto
store. You can delete the channels you do not want to keep.
Channel
√
√
√
√
√
Auto Store
Manual Store
Add/Delete
Sort
Name
† More
W
1
Enter
Press the MENU (
Result:
2
Move
Sort
œ P 1 ----- √
: P-- ----: ?
œ √ Adjust
Press the ENTER (
4
Press the ▲ or ▼ button to select Sort.
5
Press the ENTER (
From
To
Store
Move
7
Press the ▲ or ▼ button to select To. Select the new channel
number which you wish to identify by pressing the œ or √ button
repeatedly.
can also select the channel number directly by pressing
➢ You
the numeric buttons (0~9).
8
Return
Sort
From
To
Store
Move
: P 2 ----: P 1 ----œ OK
√
œ √ Adjust
English - 14
The options available in the Sort group are displayed
with From selected.
Select the channel number that you wish to change by pressing
the œ or √ button repeatedly.
Press the ▲ or ▼ button to select Store. Select OK to confirm the
exchange of channel numbers by pressing the œ or √ button.
Result:
TV
) button.
6
: P 1 ----œ P 2 ----- √
: ?
œ √ Adjust
) button.
Return
Sort
TV
The options available in the Channel group are
displayed.
3
Result:
Move
The main menu is displayed.
Press the ▲ or ▼ button to select Channel.
Result:
From
To
Store
) button.
Return
TV
Return
Y
re
9
The selected channel is exchanged with the one
previously stored to the chosen number.
For all the channels to move to the required channel numbers,
repeat steps 6 to 8 after selecting the From by pressing the ▲ or
▼ button.
AA68-03660A-00Eng
6/30/05
11:14 AM
Page 15
Storing Channels Manually
You can store up to 100 television channels, including those
received via cable networks.
TV
When storing channels manually, you can choose:
Channel
◆ Whether or not to store each of the channels found
◆ The programme number of each stored channel which
you wish to identify
Move
1
Press the MENU (
Result:
Enter
The main menu is displayed.
Press the ▲ or ▼ button to select Channel.
Result:
Press the ENTER (
4
Press the ▲ or ▼ button to select Manual Store.
5
Press the ENTER (
) button.
The options available in the Manual Store group are
displayed with Programme is selected.
To assign a programme number to a channel, press the œ or √
button.
7
Press the ▲ or ▼ button to select Colour System. Select the
broadcasting standard required by pressing the œ or √ button
repeatedly.
Result:
8
The colour standards are displayed in the following
order:
AUTO - PAL - SECAM - NT4.43
Press the ▲ or ▼ button to select Sound System. Select the
sound standard required by pressing the œ or √ button
repeatedly.
Result:
Move
œ √ Adjust
Return
) button.
6
g
Manual Store
œ P 1 ----- √
Programme
Colour System
: AUTO
Sound System
: DK
Search
: 0MHz
Channel
: C-Store
: ?
The options available in the Channel group are
displayed.
3
Result:
Return
) button.
TV
2
√
√
√
√
√
Auto Store
Manual Store
Add/Delete
Sort
Name
† More
The sound standards are displayed in the following
order:
BG - DK - I - L
TV
Manual Store
Programme
Colour System
Sound System
Search
Channel
Store
Move
: P 1 ----œ AUTO √
: DK
: 0MHz
: C-: ?
œ √ Adjust
TV
Return
Manual Store
Programme
Colour System
Sound System
Search
Channel
Store
Move
: P 1 ----: AUTO
œ DK
√
: 0MHz
: C-: ?
œ √ Adjust
English - 15
Return
AA68-03660A-00Eng
6/30/05
11:15 AM
Page 16
Storing Channels Manually (continued)
9
TV
Manual Store
Programme
Colour System
Sound System
Search
Channel
Store
: P 1 ----: AUTO
: DK
: 0MHz
œ C 1
√
: ?
œ √ Move
Return
Adjust
TV
◆ Press the ▲ or ▼ button to select Channel.
◆ Press the √ button.
◆ Press the ▲ or ▼ button to select C (Air channel) or S (Cable
channel).
◆ Press the √ button.
◆ Press the ▲ or ▼ button to select the required number.
You can also select the channel number directly by
pressing the numeric buttons (0~9).
➢
Manual Store
Programme
Colour System
Sound System
Search
Channel
Store
Move
: P 1 ----: AUTO
: DK
œ 46MHz√
√
: C 1
: ?
œ √ Search
TV
If you know the number of the channel to be stored, see the
following steps.
there is on sound or abnormal sound, re-select the sound
➢ Ifsystem
required.
10
Return
If you do not know the channel numbers, select Search by
pressing the ▲ or ▼ button. Press the œ or √ button to start the
search.
Result:
The tuner scans the frequency range until the first
channel or the channel that you selected is received
on your screen.
Manual Store
Programme
Colour System
Sound System
Search
Channel
Store
Move
: P 1 ----: AUTO
: DK
: 46MHz
: C 1
œ OK
√
œ √ Adjust
Return
11
To store the channel and associated programme number, select
Store by pressing the ▲ or ▼ button. Press the œ or √ button to
select OK.
12
Repeat Steps 9 to 11 for each channel to be stored.
☛
Channel mode
◆ P (Programme mode): When completing tuning, the
broadcasting stations in your area have been assigned
to position numbers from P00 to max P99. You can
select a channel by entering the position number in this
mode.
◆ C (Real channel mode): You can select a channel by
entering the assigned number to each air broadcasting
station in this mode.
◆ S (Cable channel mode): You can select a channel by
entering the assigned number for each cable channel in
this mode.
English - 16
Y
yo
yo
A
d
AA68-03660A-00Eng
6/7/05
4:46 PM
Page 17
Skipping Unwanted Channels
You can exclude the channels you have chosen from the channels
you scanned. When you scan through the stored channels, those
you have chosen to skip are not displayed.
TV
Press the MENU (
Result:
2
) button.
The options available in the Channel group are
displayed.
3
Press the ENTER (
4
Press the ▲ or ▼ button to select Add/Delete.
5
Press the ENTER (
Result:
7
Move
The main menu is displayed.
Enter
Return
Press the ▲ or ▼ button to select Channel.
Result:
6
√
√
√
√
√
Auto Store
Manual Store
Add/Delete
Sort
Name
† More
All of the channels that you do not specifically choose to skip are
displayed during scanning.
1
Channel
TV
Add/Delete
P
P
P
P
) button.
) button.
1
2
3
4
œ
:
:
:
œ √ Adjust
Move
√
Added
Added
Added
Added
Return
The stored channels are displayed.
Press the ▲ or ▼ button to select the channel to add or erase.
If necessary, select Added or Deleted by pressing the œ or √
button.
Repeat Step 6 for each channel to be added or erased.
TV
Add/Delete
P
P
P
P
Move
1
2
3
4
œ
:
:
:
Deleted
Added
Added
Added
œ √ Adjust
n
English - 17
√
Return
AA68-03660A-00Eng
6/7/05
4:46 PM
Page 18
Assigning Names to Channels
TV
Channel names will be assigned automatically when channel
information is broadcast. These names can be changed, allowing
you to assign new names.
Channel
√
√
√
√
√
Auto Store
Manual Store
Add/Delete
Sort
Name
† More
1
Result:
2
Move
Enter
Press the MENU (
Name
P
P
P
P
1
2
3
4
œ
:
:
:
Press the ▲ or ▼ button to select Channel.
œ √ Adjust
TV
P
P
P
P
1
2
3
4
Adjust
œ
:
:
:
A
-------------
œ √ Move
English - 18
The options available in the Channel group are
displayed.
3
Press the ENTER (
4
Press the ▲ or ▼ button to select Name.
5
Press the ENTER (
) button.
√
-----------------
Result:
Move
The main menu is displayed.
Return
Result:
TV
) button.
) button.
The current channels are displayed.
Return
6
If necessary, select the channel to be assigned to a new name by
pressing the ▲ or ▼ button.
Name
7
Press the œ or √ button.
8
Press the ▲ or ▼ button to select a letter (A~Z), a number (0~9)
or a symbol (-, space). Move on to the previous or next letter by
pressing the œ or √ button.
9
Repeat Steps 6 to 8 for each channel to be assigned to a new
name.
√
Return
If
as
If
c
AA68-03660A-00Eng
6/7/05
4:46 PM
Page 19
Fine Tuning Channel Reception
If the reception is clear, you do not have to fine tune the channel,
as this is done automatically during the search and store operation.
If the signal is weak or distorted, you may have to fine tune the
channel manually.
1
Press the MENU (
Result:
2
) button.
Channel
TV
… More
Fine Tune
LNA
√
: Off
The main menu is displayed.
Press the ▲ or ▼ button to select Channel.
Result:
Depending on the model
Move
Enter
Return
The options available in the Channel group are
displayed.
3
Press the ENTER (
4
Press the ▲ or ▼ button to select Fine Tune.
) button.
Fine Tune
P 1
1
Reset
5
Press the ENTER (
) button.
Move
œ √ Adjust
6
y
To obtain a sharp and clear picture and good sound quality, press
the œ or √ button.
Result:
7
The horizontal bar is displayed. Move the horizontal
bar’s cursor left or right by pressing the œ or √ button.
To store the fine tuning setting in the TV’s memory, press the
ENTER ( ) button.
Result:
8
Save
Return
Channel indicator turns into Red.
To erase adjusted picture or sound, select Reset by pressing the
▲ or ▼ button. Press the ENTER ( ) button.
Result:
Channel indicator returns to its original colour.
English - 19
AA68-03660A-00Eng
6/7/05
4:46 PM
Page 20
Using the LNA (Low Noise Amplifier) Feature (depending on the model)
TV
Channel
… More
Fine Tune
LNA
√
œ On √
This function is very useful in the situation that the TV is used in
weak signal. LNA amplifies the TV signal in the weak signal area; a
low-noise preamplifier boosts the incoming signal. This feature is
working only weak in signal condition, and this is memorized on
the current channel, additionally.
1
Move
œ √ Adjust
Press the MENU (
Result:
The main menu is displayed.
Return
2
Press the ▲ or ▼ button to select Channel.
Result:
The options available in the Channel group are
displayed.
3
Press the ENTER (
4
Press the ▲ or ▼ button to select LNA.
5
To activate this feature, select On by pressing the œ or √ button.
➢
English - 20
) button.
) button.
Setting the LNA option to “On” may produce worse picture
quality due to the current channel’s signal condition.
Hence, apply LNA On/Off selectively according to the
picture quality that is currently displayed.
Y
v
e
AA68-03660A-00Eng
6/7/05
4:46 PM
Page 21
Changing the Picture Standard
You can select the type of picture which best corresponds to your
viewing requirements.
1
Press the MENU (
Result:
2
Mode
Size
Digital NR
Tilt
) button.
The main menu is displayed.
The options available in the Picture group are
displayed.
Press the ENTER (
Result:
4
Picture
œ
:
Dynamic
16:9
: On
: 0
√
Press the ▲ or ▼ button to select Picture.
Result:
3
TV
) button.
The Mode is selected.
Select the required picture mode by pressing the œ or √ button
repeatedly.
Result:
The following picture mode are available:
Dynamic - Standard - Movie - Custom
Move
Return
TV
Mode
Mode
Contrast
Brightness
Sharpness
Colour
† More
Move
➢
Enter
œ
:
:
:
:
Dynamic
90
50
50
50
œ √ Adjust
You can also set these options simply by pressing the
P.MODE (
; Picture Mode) button.
English - 21
√
Return
AA68-03660A-00Eng
6/7/05
4:46 PM
Page 22
Customizing the Picture Settings
TV
Your television has several settings which allow you to control the
picture quality.
Picture
Mode
Size
Digital NR
Tilt
œ
:
√
Dynamic
16:9
: On
: 0
1
2
Move
Enter
3
Mode
Mode
Contrast
Brightness
Sharpness
Colour
† More
Move
œ
:
:
:
:
Standard
70
50
50
50
œ √ Adjust
4
5
Move
Standard
70
50
50
50
œ √ Adjust
√
6
70
8
Mode
Normal
√
√
➢
Mode
Move
The following colour tones are available:
Cool2 - Cool1 - Normal - Warm1 - Warm2
The previously adjusted settings will be reset to the
factory defaults.
Return
TV
… More
Colour Tone :
Reset
The available options are displayed again.
To return to the factory defaults, select Reset by pressing the
▲ or ▼ button. Press the œ or √ button.
The reset function is set for each mode (Dynamic, Standard,
Movie, or Custom).
Result:
œ √ Adjust
) button.
Press the ▲ or ▼ button to select Colour Tone. Select the
required option by pressing the œ or √ button repeatdly.
Result:
TV
The horizontal bar is displayed. Press the œ or √
button until you reach the optimal setting.
Press the MENU (
Result:
7
Move
The following picture mode are available:
Dynamic - Standard - Movie - Custom
Press the ▲ or ▼ button to select the option (Contrast,
Brightness, Sharpness, Colour, or Tint-NTSC only) to be
adjusted. Press the œ or √ button. These options are for each
mode adjusted (Dynamic, Standard, Movie, or Custom).
Result:
Return
Contrast
… More
Colour Tone œ
Reset
The Mode is selected.
Select the required picture mode by pressing the œ or √ button
repeatedly.
Result:
Mode
:
œ
:
:
:
) button.
Return
TV
Mode
Contrast
Brightness
Sharpness
Colour
† More
The options available in the Picture group are
displayed.
Press the ENTER (
Result:
√
) button.
The main menu is displayed.
Press the ▲ or ▼ button to select Picture.
Result:
Return
TV
Press the MENU (
Result:
Normal
œ √ Adjust
English - 22
√
Return
The television has an “automatic degaussing” system that
is activated if magnetic interference is present. To
degauss the television screen, switch power off by
pressing the “ ” (On/Off) button on the front panel.
(Refer to “Automatic Degaussing to Remove Colour
Patches” on page 45.)
Y
v
D
AA68-03660A-00Eng
6/7/05
4:46 PM
Page 23
Selecting the Picture Size (depending on the model)
You can select the picture size which best corresponds to your
viewing requirements simply by pressing the “P.SIZE ( )” button.
Depending on the model, the following picture sizes are available:
◆ Normal, Zoom1, Zoom2, 16:9
◆ 16:9, Panorama, Zoom1, Zoom2, 4:3, Auto Wide
➢
TV
Picture
Mode
Size
Digital NR
Tilt
Press the MENU (
Result:
2
Dynamic
16:9
: On
: 0
√
Lifting is available in the Zoom1 or Zoom2 mode by
pressing the ▲ or ▼ button.
Move
1
:
œ
œ √ Adjust
) button.
The main menu is displayed.
Press the ▲ or ▼ button to select Picture.
Result:
The options available in the Picture group are
displayed.
3
Press the ENTER (
4
Press the ▲ or ▼ button to select Size.
5
Press the œ or √ button to select the picture size.
) button.
t
English - 23
Return
AA68-03660A-00Eng
6/7/05
4:46 PM
Page 24
Selecting the Digital NR
If the signal received by your television is weak, you can activate
this feature to reduce any static and ghosting that may appear on
the screen.
Picture
TV
Mode
Size
Digital NR
Tilt
: Dynamic
: 16:9
œ On
: 0
√
1
Result:
2
Move
œ √ Adjust
Press the MENU (
) button.
The main menu is displayed.
Press the ▲ or ▼ button to select Picture.
Result:
Return
If
ca
The options available in the Picture group are
displayed.
3
Press the ENTER (
4
Press the ▲ or ▼ button to select Digital NR.
5
To activate this feature, select On by pressing the œ or √ button.
) button.
If
sc
If
“
English - 24
AA68-03660A-00Eng
6/7/05
4:46 PM
Page 25
Using the Tilt Control Feature
If you find that the picture received is slightly tilted to one side, you
can adjust the tilt setting.
Depending on the model
TV
1
Press the MENU (
Result:
2
Picture
Mode
Size
Digital NR
Tilt
) button.
The main menu is displayed.
:
:
Dynamic
16:9
: On
œ 0
√
Press the ▲ or ▼ button to select Picture.
Result:
The options available in the Picture group are
displayed.
3
Press the ENTER (
4
Press the ▲ or ▼ button to select Tilt.
5
Press the œ or √ button to reach the required setting (-7 to +7).
Move
œ √ Adjust
Return
) button.
Setting the Blue Screen
If no signal is being received or the signal is very weak, a blue
screen automatically replaces the noisy picture background.
If you wish to continue viewing the poor picture, you must set the
“Blue Screen” mode to “Off”.
1
Press the MENU (
Result:
2
) button.
Setup
Plug & Play
Language : English
Time
Blue Screen
Melody
Demonstration
√
√
œ On √
: On
√
The main menu is displayed.
Press the ▲ or ▼ button to select Setup.
Result:
TV
Move
œ √ Adjust
The options available in the Setup group are
displayed.
3
Press the ENTER (
4
Press the ▲ or ▼ button to select Blue Screen.
5
To activate this feature, select On by pressing the œ or √ button.
) button.
English - 25
Return
AA68-03660A-00Eng
6/7/05
4:46 PM
Page 26
Freezing the Current Picture
You can freeze the picture when watching a television programme
simply by pressing the “STILL ( )” button.
➢
To return to normal viewing, press this button again.
Changing the Sound Standard
TV
You can select the type of special sound effect to be used when
watching a given broadcast.
Sound
Mode
Equalizer
Auto Volume
SRS WOW
Turbo Sound
Pseudo Stereo
Move
œ Custom
œ √ Adjust
:
:
:
:
√
√
Off
Off
Off
Off
1
Press the MENU (
Result:
2
3
) button.
The Mode is selected.
Select the required sound effect by pressing the œ or √ button
repeatedly.
Result:
➢
English - 26
The options available in the Sound group are
displayed.
Press the ENTER (
Result:
4
The main menu is displayed.
Press the ▲ or ▼ button to select Sound.
Result:
Return
) button.
The following sound effects are available:
Standard - Music - Movie - Speech - Custom
You can also set these options simply by pressing the
S.MODE (
; Sound Mode) button.
T
p
AA68-03660A-00Eng
6/7/05
4:46 PM
Page 27
Adjusting the Sound Settings
The sound settings can be adjusted to suit your personal
preferences.
1
Press the MENU (
Result:
2
TV
Mode
Equalizer
Auto Volume
SRS WOW
Turbo Sound
Pseudo Stereo
) button.
The main menu is displayed.
Press the ▲ or ▼ button to select Sound.
Result:
The options available in the Sound group are
displayed.
3
Press the ENTER (
4
Press the ▲ or ▼ button to select Equalizer.
5
Press the ENTER (
Sound
Move
Return
Equalizer
R
) button.
The options available in the Equalizer group are
displayed.
L
Adjust
œ √ Move
Select the option to be adjusted by pressing the œ or √ button.
Press the ▲ or ▼ button to reach the required setting.
➢
Off
Off
Off
Off
) button.
can also display this group simply by pressing the
➢ You
S.MENU button.
6
√
:
:
:
:
Enter
TV
Result:
: Custom
If you make any changes to these settings, the sound
standard is automatically switched to Custom.
English - 27
Return
AA68-03660A-00Eng
6/7/05
4:46 PM
Page 28
Extra Sound Settings (depending on the model)
◆ Auto Volume
TV
Each broadcasting station has its own signal conditions, and
so it is not easy for you to adjust the volume every time the
channel is changed. This feature lets you automatically
adjust the volume of the desired channel by lowering the
sound output when the modulation signal is high or by
raising the sound output when the modulation signal is low.
Sound
Mode
Equalizer
Auto Volume
SRS WOW
Turbo Sound
Pseudo Stereo
Move
: Custom
œ
:
:
:
œ √ Adjust
√
On √
Off
Off
Off
T
o
a
o
◆ SRS WOW
Return
Emphasizes midrange and bass and provides a simulated
surround-sound experience.
TV
Sound
Mode
Equalizer
Auto Volume
SRS WOW
Turbo Sound
Pseudo Stereo
Move
◆ Turbo Sound
: Custom
√
:
œ
:
:
œ √ Adjust
This feature suitably emphasizes both higher and lower
bands of sound (and includes other effects).
Off
On √
Off
Off
You can enjoy more magnificent and dynamic sound when
watching music, movie, or other channel simply by pressing
the TURBO button.
Return
◆ Pseudo Stereo
TV
This feature converts a monaural sound signal into two
identical left and right channels. Once the Pseudo Stereo
is set to On or Off, these settings apply to the sound effects
such as Standard, Music, Movie, and Speech.
Sound
Mode
Equalizer
Auto Volume
SRS WOW
Turbo Sound
Pseudo Stereo
Move
: Custom
:
:
œ
:
œ √ Adjust
√
Off
Off
On √
Off
Return
1
Press the MENU (
Result:
TV
2
Sound
Mode
Equalizer
Auto Volume
SRS WOW
Turbo Sound
Pseudo Stereo
Move
œ √ Adjust
√
:
:
:
œ
Off
Off
Off
On √
The options available in the Sound group are
displayed.
3
Press the ENTER (
4
Select the required option (Auto Volume, SRS WOW, Turbo
Sound or Pseudo Stereo) by pressing the ▲ or ▼ button.
5
To activate each feature, select On by pressing the œ or √ button.
Return
➢
English - 28
The main menu is displayed.
Press the ▲ or ▼ button to select Sound.
Result:
: Custom
) button.
) button.
is a trademark of SRS Labs, Inc.
WOW technology is incorporated under license from SRS
labs, Inc.
➢
AA68-03660A-00Eng
6/7/05
4:46 PM
Page 29
Selecting the Sound Mode (depending on the model)
The “DUAL I-II” button displays/controls the processing and output
of the audio signal. When power is switched on, the mode is
automatically preset to either “DUAL-I” or “STEREO”, depending
on the current transmission.
Regular broadcast
(Standard audio)
MONO (Normal use)
Regular +
NICAM Mono
MONO ↔ MONO
NICAM
(Normal)
NICAM Stereo
STEREO ↔ MONO
NICAM
(Normal)
NICAM Dual-I/II
DUAL-I → DUAL-II → Mono
NICAM NICAM (Normal)
A2
Stereo
Regular broadcast
(Standard audio)
MONO (Normal use)
Bilingual or Dual-I/II
DUAL-I ↔ DUAL-II
Stereo
➢
→
On-screen indication
→
NICAM
Stereo
Type of broadcast
STEREO ↔ MONO
(Forced mono)
◆ If the receiving conditions deteriorate, listening will be
easier if the mode is set to the MONO.
◆ If the stereo signal is weak and an automatic switching
occurs, then switch to the MONO.
◆ When receiving a mono sound in the AV mode, connect
to the “AUDIO-L” input connector on the panel (front or
side). If the mono sound comes out only from left
speaker, press the DUAL I-II button.
.
S
English - 29
AA68-03660A-00Eng
6/7/05
4:46 PM
Page 30
Selecting the Melody
TV
You can hear clear melody sound when the television is powered
on or off.
Setup
Plug & Play
Language : English
Time
Blue Screen
Melody
Demonstration
Move
œ √ Adjust
English - 30
√
1
Press the MENU (
) button.
√
: Off
œ On √
√
Result:
2
Press the ▲ or ▼ button to select Setup.
Result:
Return
The main menu is displayed.
The options available in the Setup group are
displayed.
3
Press the ENTER (
4
Press the ▲ or ▼ button to select Melody.
5
To activate this feature, select On by pressing the œ or √ button.
) button.
Y
d
th
AA68-03660A-00Eng
6/7/05
4:46 PM
Page 31
Setting and Displaying the Current Time
You can set the television’s clock so that the current time is
displayed by pressing the “INFO ( )” button. You must also set
the time if you wish to use the automatic on or off timers.
➢
1
Press the MENU (
√
√
: Off
: On
√
) button.
Move
The main menu is displayed.
Enter
Return
Press the ▲ or ▼ button to select Setup.
Result:
The options available in the Setup group are
displayed.
3
Press the ENTER (
4
Press the ▲ or ▼ button to select Time.
5
Press the ENTER (
Result:
6
Setup
Plug & Play
Language : English
Time
Blue Screen
Melody
Demonstration
When pressing the “ ” button (On/Off) on the front of
the television, the clock setting will be reset.
Result:
2
TV
TV
Time
Clock
-- : -Sleep Timer
: Off
On Timer
-- : -- Off
Off Timer
-- : -- Off
On Timer Volume
: 10
On Timer Channel : 1
) button.
) button.
Move
œ √ Adjust
Return
The Clock is selected.
Press the œ or √ button to move to the hour or minute. Set the
hour or minute by pressing the ▲ or ▼ button.
TV
Time
Clock
13 : 00
Sleep Timer
: Off
On Timer
-- : -- Off
Off Timer
-- : -- Off
On Timer Volume
: 10
On Timer Channel : 1
Adjust
œ √ Move
English - 31
Return
AA68-03660A-00Eng
6/7/05
4:46 PM
Page 32
Setting the Sleep Timer
TV
You can set your TV to automatically turn off after a preset
interval.
Setup
Plug & Play
Language : English
Time
Blue Screen
Melody
Demonstration
Move
Enter
TV
√
1
Press the MENU (
) button.
√
Result:
: Off
: On
√
2
Press the ▲ or ▼ button to select Setup.
Result:
Return
The main menu is displayed.
The options available in the Setup group are
displayed.
3
Press the ENTER (
4
Press the ▲ or ▼ button to select Time.
5
Press the ENTER (
) button.
Time
Clock
13 :
œ 30
Sleep Timer
On Timer
-- :
Off Timer
-- :
On Timer Volume
On Timer Channel : 1
00
min √
-- Off
-- Off
: 10
œ √ Adjust
Return
Move
Result:
The Clock is selected.
6
Press the ▲ or ▼ button to select Sleep Timer.
7
Select the preset time interval (Off, 30 min, 60 min, 90 min,
120 min, 150 min, 180 min) for staying on by pressing the
œ or √ button.
➢
English - 32
) button.
You can select a time period of between 30 and 180
minutes after the television automatically switches to
Standby mode by pressing the SLEEP ( ) button.
Y
AA68-03660A-00Eng
6/7/05
4:46 PM
Page 33
Switching the Television On and Off Automatically
You can set the On/Off timers so that the television will:
◆ Switch on automatically and tune to the channel of
your choice at the time you select
TV
Plug & Play
Language : English
Time
Blue Screen
Melody
Demonstration
◆ Switch off automatically at the time you select
➢
1
The first step is to set the television’s clock (refer to
“Setting and Displaying the Current Time” on the page
31). If you have not yet set the clock, the message Set
the clock first. is displayed.
Press the MENU (
Result:
2
) button.
Move
The main menu is displayed.
Press the ENTER (
4
Press the ▲ or ▼ button to select Time.
5
Press the ENTER (
Adjust
) button.
œ √ Move
TV
Result:
6
) button.
The Clock is selected.
Press the ▲ or ▼ button to select On Timer. Set the time at which
you wish the television to be switched on automatically.
◆ Press the œ or √ button to move to the hour or minute.
Set these by pressing the ▲ or ▼ button.
Clock
13 :
Sleep Timer
: 30
On Timer
06 :
Off Timer
23 :
On Timer Volume
On Timer Channel : 1
Adjust
œ √ Move
Press the ▲ or ▼ button to select Off Timer. In the same above,
set the time at which you wish the television to be switched off
automatically.
➢
√
: Off
: On
√
Return
00
min
30 On
-- Off
: 10
Return
Time
◆ Press the œ or √ button to move Off and then, press the ▲ or
▼ button to select On.
7
√
Time
Clock
13 :
Sleep Timer
: 30
On Timer
06 :
Off Timer
-- :
On Timer Volume
On Timer Channel : 1
The options available in the Setup group are
displayed.
3
Enter
TV
Press the ▲ or ▼ button to select Setup.
Result:
Setup
Auto Power Off
When you set the timer “On”, the television will
eventually turn off, if no controls are operated for 3 hours
after the TV was turned on by timer. This function is only
available in timer “On” mode and prevents overheating or
leakages, which may occur if a TV is on for too long
(when you are on vacation, for example).
English - 33
00
min
30 On
30 On
: 10
Return
AA68-03660A-00Eng
6/7/05
4:46 PM
Page 34
Setting the Preferred Volume Level/Channel
TV
The preferred volume and channel can be set for when the timer
automatically turns on the TV.
Setup
Plug & Play
Language : English
Time
Blue Screen
Melody
Demonstration
Move
Enter
TV
U
co
T
√
1
Press the MENU (
) button.
√
Result:
: Off
: On
√
2
Press the ▲ or ▼ button to select Setup.
Result:
Return
The main menu is displayed.
The options available in the Setup group are
displayed.
3
Press the ENTER (
4
Press the ▲ or ▼ button to select Time
5
Press the ENTER (
) button.
Time
Clock
13 :
Sleep Timer
: 30
On Timer
06 :
Off Timer
23 :
On Timer Volume
On Timer Channel : 1
00
min
30 On
30 On
œ10√
√
œ √ Adjust
Return
Move
Result:
) button.
The Clock is selected.
6
Press the ▲ or ▼ button to select On Timer Volume.
7
Press the œ or √ button to adjust volume level.
8
Press the ▲ or ▼ button to select On Timer Channel.
9
Press the œ or √ button to select the channel.
Ed
English - 34
AA68-03660A-00Eng
6/7/05
4:46 PM
Page 35
Viewing an External Signal Source/Edit Name (depending on the model)
Use the remote control to switch between viewing signal from
connected equipment, such as VCR, DVD, Set-Top-boxes and the
TV source (broadcast or cable).
TV
Input
Source List
Edit Name
1
Press the MENU (
Result:
2
) button.
The main menu is displayed.
Press the ENTER (
) button to select Input.
Move
Result:
3
4
The options available in the Input group are
displayed.
Press the ENTER (
Result:
➢
TV
) button again to select Source List.
The options available in the Source List group are
displayed.
Move
When you connect equipment to the TV, you can choose
between the following sets of jacks : EXT1 or EXT2 on the
TV’s rear panel, and AV/S-Video on the TV’s side panel.
: -----: -----: ------
) button.
Source List
Edit Name
Return
Edit Name
œ
:
:
:
√
---------------------
The options available in the Input group are
displayed.
Press the ▲ or ▼ button to select Edit Name.
Press the ENTER ( ) button.
Result:
Enter
EXT1
EXT2
AV
S-Video
) button to select Input.
√
√
: TV
TV
The main menu is displayed.
Press the ENTER (
Return
Input
Move
Press the MENU (
Result:
Enter
TV
You can also set these options simply by pressing the
SOURCE (
) button. If you change the external source
while viewing, pictures might take a short period of time to
be switched.
Result:
3
Return
Source List
TV
EXT1
EXT2
AV/S-Video
Edit Name
2
Enter
Press the ▲ or ▼ button to select signal source, then press the
ENTER ( ) button.
➢
1
√
√
: TV
The options available in the Edit Name group are
displayed.
4
Press the ▲ or ▼ button to select external device :
EXT1 - EXT2 - AV - S-Video.
5
Press the œ or √ button.
Move
Select the name by pressing the œ or √ button.
7
Set other signal sources (EXT1, EXT2, AV, S-Video) using the
same method as listed above.
Return
Edit Name
TV
EXT1
EXT2
AV
S-Video
Move
6
œ √ Adjust
œ
:
:
:
DVD
----------------
œ √ Adjust
English - 35
√
Return
AA68-03660A-00Eng
6/7/05
4:46 PM
Page 36
Viewing the Picture In Picture (PIP) (depending on the model)
TV
You can display a sub picture within the main picture of TV
program or external A/V devices such as VCR or DVD. In this way
you can watch TV program or monitor the video input from any
connected devices while watching TV or other video input.
Picture
Mode
Size
Digital NR
Tilt
PIP
:
:
Dynamic
16:9
: On
: 0
√
1
Press the MENU (
Result:
Move
Enter
Return
2
PIP
œ Off
PIP
Move
œ √ Adjust
√
The options available in the Picture group are
displayed.
3
Press the ENTER (
4
Press the ▲ or ▼ button to select PIP. Press the ENTER (
button.
5
Press the œ or √ button to On.
Result:
Return
➢
TV
The main menu is displayed.
Press the ▲ or ▼ button to select Picture.
Result:
TV
) button.
) button.
)
The options available in the PIP group are displayed.
You can also activate the PIP simply by pressing the PIP
button. To deactivate, press it again.
PIP
PIP
Source
Swap
Size
Position
Programme
Move
: On
œ TV
√
√
7
Press the œ or √ button to select a source of sub picture.
Result:
➢
Return
TV
PIP
Move
Press the ▲ or ▼ button to select Source.
: Large
:
: P 1
œ √ Adjust
PIP
Source
Swap
Size
Position
Programme
6
: On
: TV
√
: Large
:
: P 2
Enter
English - 36
Return
The sources are displayed in the following order:
TV - EXT1 - EXT2 - AV/S-Video
The PIP picture can be viewed only when a source different
from the main picture's is selected in the PIP window.
8
Press the ▲ or ▼ button to select Swap.
9
Press the ENTER (
Result:
➢
) button.
The main picture and the sub picture are
interchanged.
You can also interchange the main picture and the sub
picture simply by pressing the SWAP ( ) button.
AA68-03660A-00Eng
6/7/05
4:46 PM
Page 37
Viewing the Picture In Picture (PIP) (depending on the model) (continued)
TV
10
Press the ▲ or ▼ button to select Size.
11
Select a size of sub picture by pressing the œ or √ button.
Result:
➢
➢
Press the ▲ or ▼ button to select Position.
13
Press the œ or √ button.
Result:
14
The positions available are displayed.
- - -
You can select these options simply by pressing the
(Position) button.
Press the ▲ or ▼ button to select Programme. You can select the
channel that you want to view through sub picture by pressing the
œ or √ button.
➢
Move
◆ When the Source is set to TV, you can select the
channel of sub picture.
◆ You can select the channel of the sub picture simply by
pressing the ▲ or ▼ button.
: On
: TV
œ Large
:
: P 1
œ √ Adjust
√
√
Return
TV
PIP
PIP
Source
Swap
Size
Position
Programme
You can select these options simply by pressing the SIZE
button.
12
➢
PIP
Source
Swap
Size
Position
Programme
The sizes are displayed in the following order:
Large - Small - 3 PIP - 4 PIP - 12 PIP
3 PIP/4 PIP/12 PIP : You can view up to 3,4, or 12
memorizer channels on the sub
picture spontaneously.
PIP
Move
: On
: TV
√
: Large
œ
: P 1
œ √ Adjust
√
Return
TV
PIP
PIP
Source
Swap
Size
Position
Programme
Move
: On
: TV
√
: Large
:
œ P 1
œ √ Adjust
English - 37
√
Return
AA68-03660A-00Eng
6/7/05
4:46 PM
Page 38
Viewing the Picture In Picture (PIP) (depending on the model) (continued)
Easy functions of remote control
Buttons
Feature
PIP
Used to activate or deactivate the PIP function directly.
SWAP
Used to interchange the main picture and the sub picture.
When the main picture is in the Video mode and the
sub picture is in the TV mode, you might not hear
the sound of main picture when pressing the SWAP
(
) button after changing the sub picture channel.
At this time, reselect the channel of main picture.
➢
SOURCE
Used to assign a source of sub picture (TV, EXT1, EXT2,
AV/S-Video).
SIZE
Used to select a size of sub picture (Large, Small,
3 PIP, 4 PIP, or 12 PIP).
M
te
T
(Position) Used to move the sub picture counterclockwise.
P
/
Used to select the channel of sub picture.
Y
English - 38
.
e
AA68-03660A-00Eng
6/7/05
4:46 PM
Page 39
Teletext Feature
Most television channels provide written information services via
teletext. Information provided includes:
◆ Television programme times
◆ News bulletins and weather forecasts
◆ Sports results
◆ Travel information
The teletext pages are organized according to six categories:
P
Part
Contents
A
Selected page number.
B
Broadcasting channel identity.
C
Current page number or search indications.
D
Date and time.
E
Text.
F
Status information.
FASTEXT information.
➢
➢
It can be diffrent from depending on TTX source.
Teletext information is often divided between several
pages displayed in sequence, which can be accessed by:
◆ Entering the page number
◆ Selecting a title in a list
◆ Selecting a coloured heading (FASTEXT system)
Displaying the Teletext Information
You can display Teletext information at any time on your television.
Teletext information to be displayed correctly,
☛ For
channel reception must be stable; otherwise:
◆ Information may be missing
◆ Some pages may not be displayed
1
Select the channel providing the Teletext service using the
button.
2
Press the TTX/MIX (
) button to activate the teletext mode.
The contents page is displayed. It can be redisplayed
Result:
at any time by pressing the
(index) button.
3
If you wish to display the actual broadcast at the same time as
the teletext page, press the TTX/MIX (
) button again.
4
Press the TV (
or
) button to exit from the teletext display.
English - 39
AA68-03660A-00Eng
6/7/05
4:46 PM
Page 40
Selecting a Page by Number
You can enter the page number directly by pressing the numeric
buttons on the remote control.
1
Enter the three-digit page number given in the content by pressing
the corresponding numeric buttons.
Result:
2
T
a
co
The current page counter is incremented and the
page is then displayed.
If the selected page is linked with several secondary pages, the
secondary pages are displayed in sequence. To freeze the display
on a given page, press the
(hold). Press the
(hold) again to
resume.
Using the various display options:
English - 40
To display...
Press the...
◆ Both teletext information and
the normal broadcast
TTX/MIX (
twice
)
◆ Hidden text
(answers to quiz games, for example)
(reveal)
◆ The normal screen
(reveal) again
◆ A secondary page,
by entering its 4-digit number
(sub-page)
◆ The next page
(page up)
◆ The previous page
(page down)
◆ Double-size letters in the:
• Upper half of the screen
• Lower half of the screen
(size)
• Once
• Twice
◆ Normal screen
• Three times
Y
le
AA68-03660A-00Eng
6/7/05
4:46 PM
Page 41
Using FLOF to Select a Page
The various topics included in the teletext pages are colour-coded,
and can be selected by pressing the coloured buttons on the remote
control.
g
1
Display the teletext contents page by pressing the TTX/MIX
(
) button.
2
Press the coloured button corresponding to the topic that you
wish to select;the available topics are given on the status line.
y
o
Result:
The page is displayed with other coloured information
that can be selected in the same way.
3
To display the previous or next page, press the corresponding
coloured button.
4
To display the subpage, see the following steps.
◆ Press the
(sub-page) button.
Result:
The available subpages appear.
◆ Select the required sub-page. Sub-pages can be scrolled by
using the TURBO (Red) or S.MENU (Green) button.
Storing Teletext Pages
You can store up to four teletext pages to display them later at
leisure.
1
Select the LIST mode using the
Result:
➢
button.
Four 3-digit numbers are displayed in different
colours.
The
button is used to switch between the LIST and
FLOF (or FASTEXT) modes.
2
Press the coloured button corresponding to the page that will be
replaced.
3
Enter the new page number using the numeric buttons.
4
Repeat steps 2 and 3 for each page to be stored, using a
different coloured button each time.
5
Press the
(store) button until the corresponding blocks blink.
English - 41
AA68-03660A-00Eng
6/7/05
4:46 PM
Page 42
Connecting to the External Input/Outputs (depending on the model)
➢
“EXT 1 (RGB)” is used for the equipment with an RGB
output, such as video game devices or video disc
players.
VCR
②
①
Rear of the TV
DVD
③
Decoder /
Video game device
or
Video disc player
① This end can be fitted with:
◆ A SCART connector
◆ Three RCA connectors (Video + Audio-L and R)
② If you have a second VCR and wish to copy cassettes tape, connect the
source VCR to “EXT 1 (RGB)” and the target VCR to “EXT 2 (AV)” so that
you can redirect the signal from “EXT 1 (RGB)” to “EXT 2 (AV)”.
Satellite receiver
➃
③ If you have a decoder, connect the decoder to the VCR and the VCR to the
television.
➃ When you wish to record a programme, connect the receiver to “EXT 1
(RGB)” and the VCR to “EXT 2 (AV)” so that you can redirect the signal
from “EXT 1 (RGB)” to “EXT 2 (AV)”.
☛
English - 42
AA68-03660A-00Eng
6/27/05
2:21 PM
Page 43
Connecting to the RCA Input (depending on the model)
➢
The RCA (VIDEO and AUDIO-L+R) connectors are used for equipment,
such as camcorders, video disc players, and some video game devices.
Camcorder
Side of the TV
Video game device
Video disc player
Connecting to the S-Video Input (depending on the model)
➢
The S-VIDEO and RCA (AUDIO-L+R) connectors are used for equipment with an S-Video output,
such as a camcorder or VCR.
Side of the TV
①
and
Camcorder
VCR
① To play pictures and sound, both the S-VIDEO and RCA connectors must be used.
☛
Whenever you connect an audio or video system to your
television, ensure that all elements are switched off.
Refer to the documentation supplied with your equipment
for detailed connection instructions and associated safety
precautions.
English - 43
AA68-03660A-00Eng
6/7/05
4:46 PM
Page 44
Viewing Pictures From External Sources
Once you have connected up your various audio and video
systems, you can view different sources by selecting the
appropriate input.
1
Check that all the necessary connections have been made.
2
Switch your television on, then press the SOURCE (
repeatedly.
Result:
➢
➢
A
te
If
) button
The input sources are displayed in the following
order:
EXT1 - EXT2 - AV/S-Video
Depending on the source selected, the pictures may appear
automatically.
To watch television programmes again, press the TV (
button and select the number of the channel required.
)
B
If
te
N
N
N
S
B
d
R
English - 44
r
AA68-03660A-00Eng
6/7/05
4:46 PM
Page 45
Automatic Degaussing to Remove Colour Patches
A degaussing coil is mounted around the picture tube, so you do not normally need to degauss the
television manually.
If you move the television to a different position and colour patches appear on the screen, you must:
◆ Switch the television off by pressing the “
” (On/Off) button on the front panel
◆ Unplug the television from the wall socket
◆ Leave the television power-off for about 30 minutes so that the automatic degauss function
can be activated, and then press the “POWER ( )” button on the remote control.
☛
If your television will be left unattended, press the “
television off.
” (On/Off) button to turn your
)
Troubleshooting: Before Contacting Service Personnel
Before contacting Samsung after-sales service, perform the following simple checks.
If you cannot solve the problem using the instructions below, note the model and serial number of the
television and contact your local dealer.
No sound or picture
◆ Check that the mains lead has been connected to a wall socket.
◆ Check that you have pressed the “ ” button (On/Off) and the
POWER ( ) button.
◆ Check the picture contrast and brightness settings.
◆ Check the volume.
Normal picture but no sound
◆ Check the volume.
◆ Check whether the MUTE (
been pressed.
) button on the remote control has
No picture or black and white picture
◆ Adjust the colour settings.
◆ Check that the broadcast system selected is correct.
Sound and picture interference
◆ Try to identify the electrical appliance that is affecting the television,
then move it further away.
◆ Plug your television into a different mains socket.
Blurred or snowy picture,
distorted sound
◆ Check the direction, location and connections of your aerial.
This interference often occurs due to the use of an indoor aerial.
Remote control malfunctions
◆ Replace the remote control batteries.
◆ Clean the upper edge of the remote control (transmission window).
◆ Check the battery terminals.
English - 45
AA68-03660A-00Eng
6/7/05
4:46 PM
Memo
English - 46
Page 46
AA68-03660A-00Eng
6/7/05
4:46 PM
Page 47
Memo
English - 47
AA68-03660A-00Eng
6/7/05
4:46 PM
Page 48
- AFTER SALES SERVICE
- Do not hesitate to contact your retailer or service agent
if a change in the performance of your product
indicates that a faulty condition may be present.
ELECTRONICS
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate
collection systems)
This marking shown on the product or its literature, indicates that it should not be
disposed with other household wastes at the end of its working life. To prevent possible
harm to the environment or human health from uncontrolled waste disposal, please
separate this from other types of wastes and recycle it responsibly to promote the
sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product, or
their local government office, for details of where and how they can take this item for
environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the
purchase contract. This product should not be mixed with other commercial wastes for
disposal.
AA68-03660A-00