Philips SLV5405 Additional TV link receiver

Philips
Additional TV link receiver
SLV5405
Additional receiver
for your SLV5400
Watch the same video & audio signal transmitted by your SLV5400 Wireless TV Link
on your third TV !
Watch and listen anywhere!
• Watch any video device on a 2nd TV
• Choose between four video devices to watch on your 2nd TV
• Works with DVD+RW/ DVD/ VCR / set-top box, and many more
• Compatible with most video devices and brands
Operate your TV entertainment anywhere!
• Access to 4 devices at the press of a button
• Device can be operated in a closed cabinet
Simple set-up and easy to use
• Less clutter, less fuss and no cable laying or drilling
• Wireless signal passes through walls and ceilings
SLV5405/00
Additional TV link receiver
Specifications
Product highlights
Tuner/Reception/Transmission
• Antenna location: Picture & sound: Internal, RC
extender: External
• Frequency range: picture & sound: 2.4 GHz RC
extender: 433 MHz MHz
• TV system: PAL, SECAM
• Typical range indoor: 15-30 m
• Typical range outdoor: 100 m
• Remote control extender
• Supported IR carrier frequency: 32-57 KHz
Accessories
Dimensions
• Receiver dimensions (W x H x D):
146 x 146 x 62 mm
• Temperature (operation): +5ºC to +35ºC
Power
• Power consumption: 15 W
• Power supply: AC/DC Adapter, 220-240V
Receiver
• SCART out: CVBS out, Audio L+R out
•
• AC/DC Adaptor: 12VDC, 500mA
Watch any device on a 2nd TV
The wireless link uses standard SCART and cinch plugs
that are used by almost every brand of audio/video
devices. If you device has one of these standard
connectors it works with the wireless link
Choose 1 of 4 devices to watch
The easy way to switch between your DVD player,
satellite receiver, VCR or set-top box without having to
reconfigure your entire home cinema set-up. The
wireless TV link has four separate inputs, each with its
own SCART connector, to allow you to connect up to
four devices.
Works with DVD and many more
Extend your possibilities for viewing movies, sports
events, live performances and a range of TV channels
anywhere in your home. The wireless TV link is suitable
for transmission of AV content of all brands of PayTV
and Pay-per-View decoders, satellite receivers, set-top
boxes, DVD players, VCRs and camcorders.
Works on almost all brands
The wireless link uses standard SCART and cinch plugs
that are used by almost every brand of audio/video
devices.
One touch access to 4 devices
There's no need to swap cables at the transmitter to
view any video device on the second TV. Simple press
the input selection button to switch from input device.
Operates in closed cabinet
If you store your audio/video devices in a cabinet, you
cannot operate these devices with a normal IR remote
control. The Philips wireless remote control link allows
you to operate these devices with the cabinet doors
closed thanks to an RF-based link that picks up the
infrared signals of a remote control and translates them
into RF. The receiver unit then translates them back to
IR.
Wireles means no drilling
A 2.4 GHz wireless link between the receiver and
transmitter means you don't have to lay cables or drill
holes through walls.
Wireless goes through walls
There's no need to buy or rent duplicate A/V equipment.
The wireless RF system extends your possibilities for
viewing DVD movies and your favorite Satellite or TV
channels anywhere in your home. With a range of up to
30 meters inside the house, it delivers high-quality video
and stereo audio no matter where your second TV is
located.
Date of issue 2007-02-22
© 2007 Koninklijke Philips Electronics N.V.
All Rights reserved.
Version: 1.0
Specifications are subject to change without notice.
Trademarks are the property of Koninklijke Philips
Electronics N.V. or their respective owners.
12 NC: 9082 100 05005
EAN: 87 10895 90451 3
www.philips.com