Samsung Camcorder Miniket VP-M110 red

VP-M102 UK_ Contents 2004.12.20 11:34 AM Page 2
ENGLISH
ENGLISH
Digital Camcorder
VP-M102/M105/M110
THE CAM IS MANUFACTURED BY:
AF
CCD
LCD
ELECTRONICS
Auto Focus
Charge Coupled Device
Liquid Crystal Display
Owner’s Instruction Book
Before operating the unit, please read this
Instruction Book thoroughly, and retain it for
future reference.
ELECTRONICS
This product meets the intent of
Directive 89/336 CEE, 73/23 CEE, 93/68 CEE.
*Samsung Electronics’ Internet Home Page
United Kingdom
http://www.samsungelectronics.co.uk
AD68-00814B
VP-M102 UK_ Contents 2004.12.20 11:34 AM Page 2
ENGLISH
ENGLISH
Contents
Notices and Safety Precautions
Contents
8
Precautions on the CAM Care ....................................................................................................................................................................................8
Notes Regarding COPYRIGHT....................................................................................................................................................................................9
Notes Regarding Moisture Condensation.................................................................................................................................................................9
Notes Regarding the CAM...........................................................................................................................................................................................9
Notes Regarding the Battery Pack...........................................................................................................................................................................10
Notes Regarding a Trademark..................................................................................................................................................................................10
Notes Regarding the Lens.........................................................................................................................................................................................11
Notes Regarding the LCD Display ...........................................................................................................................................................................11
Precautions Regarding Service................................................................................................................................................................................11
Precautions Regarding Replacement Parts............................................................................................................................................................11
Getting to Know Your CAM
12
Features.......................................................................................................................................................................................................................12
Accessories Supplied with the CAM .......................................................................................................................................................................13
Name of Each Part
14
Rear & Left View.........................................................................................................................................................................................................14
Right & Bottom View..................................................................................................................................................................................................15
LCD Display ................................................................................................................................................................................................................16
OSD(On Screen Display in Video Record Mode/Video Play Mode) ..................................................................................................................16
OSD(On Screen Display in Photo Capture Mode/Photo View Mode)................................................................................................................17
OSD(On Screen Display in MP3 Play Mode/Voice Record/Play Mode) ...........................................................................................................18
How to Use the Battery Pack
19
Battery Pack Installation / Ejection..........................................................................................................................................................................19
Maintain the Battery Pack .........................................................................................................................................................................................20
Charging the Battery Pack........................................................................................................................................................................................23
2
Getting Started
24
The Colour of the LED...............................................................................................................................................................................................24
Using Hardware Reset Function ..............................................................................................................................................................................24
Before You Start Operating the CAM.......................................................................................................................................................................25
Using the Function Button........................................................................................................................................................................................26
Using the Display Button ..........................................................................................................................................................................................27
Adjusting the LCD Monitor .......................................................................................................................................................................................28
Structure of the Folders and Files ...........................................................................................................................................................................29
Recording Time and Capacity .................................................................................................................................................................................30
Selecting the Memory Type.......................................................................................................................................................................................32
Using the Memory Stick ............................................................................................................................................................................................33
Mode and Menu Selection.........................................................................................................................................................................................34
Video Mode
35
Recording....................................................................................................................................................................................................................36
Recording ..............................................................................................................................................................................................................36
Zooming In and Out ..............................................................................................................................................................................................37
Playing .........................................................................................................................................................................................................................38
Playing on the LCD Monitor..................................................................................................................................................................................38
Selecting File Options ...............................................................................................................................................................................................40
Deleting Video files ...............................................................................................................................................................................................40
Locking Video files ................................................................................................................................................................................................41
Copying Video files ...............................................................................................................................................................................................42
Setting the PB Option ...........................................................................................................................................................................................43
Setting Various Functions.........................................................................................................................................................................................44
Setting the Video file Size.....................................................................................................................................................................................44
Setting the Video file Quality.................................................................................................................................................................................45
Setting the Focus ..................................................................................................................................................................................................46
Setting the EIS (Electronic Image Stabilizer) .......................................................................................................................................................47
Setting the White Balance ....................................................................................................................................................................................48
Setting the Program AE (Programmed Auto Exposure) ......................................................................................................................................49
3
VP-M102 UK_ Contents 2004.12.20 11:34 AM Page 4
ENGLISH
ENGLISH
Contents
Contents
Setting the BLC (Backlight Compensation)..........................................................................................................................................................50
Setting the Effect...................................................................................................................................................................................................51
Setting the Digital Zoom .......................................................................................................................................................................................52
Photo Mode
53
Capturing.....................................................................................................................................................................................................................54
Capturing Images..................................................................................................................................................................................................54
Zooming In and Out ..............................................................................................................................................................................................55
Viewing ........................................................................................................................................................................................................................56
Viewing Photo files on the LCD Monitor...............................................................................................................................................................56
Selecting File Options ...............................................................................................................................................................................................57
Deleting Photo files ...............................................................................................................................................................................................57
Locking Photo files................................................................................................................................................................................................58
Setting DPOF(Digital Print Order Format) Function ............................................................................................................................................59
Copying Photo files ...............................................................................................................................................................................................60
Setting Various Functions.........................................................................................................................................................................................61
Setting the Photo file Size ....................................................................................................................................................................................61
Setting the Light ....................................................................................................................................................................................................62
Setting the Focus ..................................................................................................................................................................................................63
Setting the EIS (Electronic Image Stabilizer) .......................................................................................................................................................64
Setting the White Balance ....................................................................................................................................................................................65
Setting the Program AE (Programmed Auto Exposure) ......................................................................................................................................66
Setting the BLC (Backlight Compensation)..........................................................................................................................................................67
MP3 Mode
69
Storing Music in the CAM .........................................................................................................................................................................................70
Copying Music files to the CAM ...........................................................................................................................................................................70
Playing .........................................................................................................................................................................................................................71
Playing Music files ................................................................................................................................................................................................71
Selecting Play Options ..............................................................................................................................................................................................72
4
Setting Repeat Play ..............................................................................................................................................................................................72
Selecting File Options ...............................................................................................................................................................................................73
Deleting Music files ...............................................................................................................................................................................................73
Locking Music files................................................................................................................................................................................................74
Copying Music files ...............................................................................................................................................................................................75
Voice Recorder Mode
76
Recording....................................................................................................................................................................................................................76
Recording Voice....................................................................................................................................................................................................76
Playing .........................................................................................................................................................................................................................77
Playing Voice files .................................................................................................................................................................................................77
Selecting File Options ...............................................................................................................................................................................................78
Deleting Voice files................................................................................................................................................................................................78
Locking Voice files ................................................................................................................................................................................................79
Copying Voice files................................................................................................................................................................................................80
Using File Browser
81
Deleting Files or Folders ...........................................................................................................................................................................................81
Locking Files...............................................................................................................................................................................................................82
Copying Files or Folders...........................................................................................................................................................................................83
Viewing File Information............................................................................................................................................................................................84
Setting the CAM
85
Adjusting the LCD Monitor .......................................................................................................................................................................................86
Adjusting the LCD Brightness...............................................................................................................................................................................86
Adjusting the LCD Colour .....................................................................................................................................................................................87
Adjusting Date/Time...................................................................................................................................................................................................88
Setting Time ..........................................................................................................................................................................................................88
Setting Date ..........................................................................................................................................................................................................89
Setting Date Format..............................................................................................................................................................................................90
Setting Time Format..............................................................................................................................................................................................91
5
VP-M102 UK_ Contents 2004.12.20 11:34 AM Page 6
ENGLISH
ENGLISH
Contents
Contents
Setting the System.....................................................................................................................................................................................................92
Setting the Auto Shut off.......................................................................................................................................................................................92
Setting the Demo Function ...................................................................................................................................................................................93
Setting Start-up Mode...........................................................................................................................................................................................94
Setting the File No. Function ................................................................................................................................................................................95
Setting the Beep Sound........................................................................................................................................................................................96
Viewing Version Information ................................................................................................................................................................................97
Setting Memory ..........................................................................................................................................................................................................98
Selecting the Storage Type...................................................................................................................................................................................98
Formatting the Memory.........................................................................................................................................................................................99
Viewing Memory Space ......................................................................................................................................................................................100
Using USB Mode ......................................................................................................................................................................................................101
Storing Files to the External Memory .................................................................................................................................................................101
System Environment...........................................................................................................................................................................................102
Using PC Cam ....................................................................................................................................................................................................103
Connecting the CAM to a Printer .......................................................................................................................................................................104
Miscellaneous Information
105
Maintenance
117
Cleaning and Maintaining the CAM........................................................................................................................................................................117
After using the CAM............................................................................................................................................................................................117
Cleaning the Body ..............................................................................................................................................................................................118
Using the Built-in Rechargeable Battery.............................................................................................................................................................118
Using the CAM Abroad .......................................................................................................................................................................................119
Troubleshooting
120
Self Diagnosis Display.............................................................................................................................................................................................120
Using the Menu
122
Specifications
124
Index
126
Power Sources (United Kingdom Only)
128
Connecting the CAM with other Devices ..............................................................................................................................................................106
Connecting the CAM to TV ................................................................................................................................................................................106
Connecting the CAM to VCR or DVD Recorder ................................................................................................................................................107
Copying Video files to a VCR Tape ....................................................................................................................................................................108
Connecting the CAM to a PC using the USB cable ..........................................................................................................................................109
Installing Programs ..................................................................................................................................................................................................110
Installing Image Mixer .........................................................................................................................................................................................110
Installing for using PC-Cam ................................................................................................................................................................................112
Installing Windows98SE Driver(For only Windows98SE)..................................................................................................................................113
Printing Photos.........................................................................................................................................................................................................115
Printing with PictBridge Function ........................................................................................................................................................................115
Printing Photos with DPOF Files ........................................................................................................................................................................116
6
7
VP-M102 UK_0-Start 2004.12.20 11:34 AM Page 8
ENGLISH
ENGLISH
Notices and Safety Precautions
Notices and Safety Precautions
Precautions on the CAM Care
Notes Regarding COPYRIGHT
✤
✤
Please note the following precautions for use:
Please keep this device in a safe place. The device contains a lens that can be damaged by shock.
Keep away from the reach of the children.
✤
✤
Do not place your device in a wet place. Moisture and water may cause the device to malfunction.
To avoid electric shock, do not touch your device or power cable with wet hands.
Do not use the flash close to another’s eyes. The flash emits a strong light that may cause damage similar to direct
sunlight on one s eyesight. Particular care should be observed if photographing infants, when the flash should be no less
than 3 feet from your subject.
If the device is not working properly, please consult your nearest dealer or authorized Samsung service facility.
Disassembling the device yourself may cause irrecoverable damage which will be difficult to repair.
Clean the device with a dry, soft cloth. Use a soft cloth moistened with a mild detergent solution for removing stains.
Do not use any type of solvent, especially benzene, as they may seriously damage the finish.
Keep your device away from rain and saltwater. After using, clean the device. Saltwater may cause the parts to corrode.
Television programmes, movie video tapes, DVD titles, films and other programme materials may be copyrighted.
Unauthorized recording of copyrighted materials may infringe on the rights of the Copyright owners and is contrary to
copyright laws.
All the trade names and registered trademarks mentioned in this manual or other documentation provided with your
Samsung product are trademarks or registered trademarks of their respective holders.
Notes Regarding Moisture Condensation
1. A sudden rise in atmospheric temperature may cause condensation to form inside the CAM.
For Example:
✤ Entering or leaving a heated place on a cold day might cause condensation inside the product.
✤ To prevent condensation, place the product in a carrying case or a plastic bag before exposing it to a sudden change of
temperature.
Notes Regarding the CAM
1. Do not leave the CAM exposed to high temperature (above 60°C or 140°F).
For example, in a parked closed car in summer or exposed to direct sunlight.
2. Do not let the CAM get wet.
Keep the CAM away from rain, salt water, or any other form of moisture.
The CAM will be damaged if immersed in water or subjected to high levels of moisture.
8
9
VP-M102 UK_0-Start 2004.12.20 11:34 AM Page 10
ENGLISH
ENGLISH
Notices and Safety Precautions
Notices and Safety Precautions
Notes Regarding the Battery Pack
Notes Regarding the Lens
✤
✤
✤
✤
✤
✤
✤
✤
✤
Make sure the battery pack is fully charged before starting to record.
To preserve battery power, keep the CAM turned off when you are not operating it.
If your device is left in STBY mode without being operated for more than 5 minutes, it will automatically turn itself off to
protect against unnecessary battery discharge.
Make sure that the battery pack is attached firmly in place.
The new battery pack provided with the product is not charged.
Before using the battery pack, you need to fully charge it.
Do not drop the battery pack. Dropping the battery pack may damage it.
Fully discharging a Lithium Polymer battery damages the internal cells. The battery pack may be prone to leakage when
fully discharged.
To avoid damage to the battery pack, make sure to remove the battery when no charge remains.
Clean the terminal to remove foreign substance before inserting the battery pack.
✤
Notes Regarding the LCD Display
1. The LCD monitor has been manufactured using the high precision technology. However, there may be tiny dots
(red, blue or green in colour) that appear on the LCD monitor. These dots are normal and do not affect the recorded
picture in any way.
2. When you use the LCD monitor under direct sunlight or outdoors, it maybe difficult to see the picture clearly.
3. Direct sunlight can damage the LCD monitor.
Precautions Regarding Service
✤
✳
When the battery reaches the end of its life, please contact your local dealer.
Batteries must be disposed of as chemical waste.
✳ Be careful not to drop the battery pack when you release it from the CAM.
Do not film with the camera lens pointing directly at the sun.
Direct sunlight can damage the CCD (Charge Coupled Device, the imaging sensor).
✤
✤
Do not attempt to service the CAM yourself.
Opening or removing covers may expose you to dangerous voltage or other hazards.
Refer all servicing to qualified service personnel.
Precautions Regarding Replacement Parts
Notes Regarding a Trademark
✤
10
The logos regarding DivX, DivX Licensed are the trademark of DivX, Network, Inc and can be used after contracting
license.
✤
✤
When replacement parts are required, be sure the service technician has used replacement parts specified by the
manufacturer and having the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric shock or other hazards.
11
VP-M102 UK_0-Start 2004.12.20 11:34 AM Page 12
ENGLISH
Getting to Know Your CAM
Getting to Know Your CAM
Features
Accessories Supplied with the CAM
●
Integrated Digital CAM/DSC operation
An integrated digital imaging device that easily converts between a Digital CAM and a Digital Still Camera with
comfortable and easy recording.
●
●
●
●
●
Lithium Polymer Battery pack
Employing 800K CCD Pixel, a maximum resolution of 800x600 is available.
AC Power Adapter
100x Digital Zoom
3.
Video/Audio Cable
Allows the user to magnify an image up to 100x its original size.
4.
USB Cable
Colourful TFT LCD
5.
Cradle
6.
Earphones
Electronic Image Stabilizer (EIS)
7.
Hand Strap
8.
Carrying Case
The DSE (Digital Special Effects) allows you to give the film a special look by adding various special effects.
9.
Instruction Book/Quick Guide
USB Interface for Data Transfer
10.
Software CD
11.
Lens Cover
You can use this the CAM as a PC camera for video chatting, video conference and other PC camera applications.
12.
Neck Strap
Voice Record / Playback with vast memory
13.
Scart Adapter(Option)
14.
Extended life Battery Pack(Option)
Various Digital Effects
You can transfer still images and video file or any other files to a PC using the USB interface.
●
●
PC Cam for multi-entertaining
You can record voice and store it in the internal memory, Memory Stick and Memory Stick Pro(Option) and playback the
recorded voice.
●
Make sure that the following basic accessories are supplied with your CAM.
2.
With the CAM, you can reduce unstable images by avoiding natural shaking movements.
●
✤
1.
High Resolution Image Quality (Digital Still Camera)
A high-resolution(210K) colourful TFT LCD gives you clean, sharp images as well as the ability to review your recorded
files immediately.
1. Lithium Polymer
2. AC Power Adapter
3. Video/Audio Cable
4. USB Cable
5. Cradle
6. Earphones
7. Hand Strap
8. Carrying Case
9. Instruction Book/
Battery pack
Quick Guide
10. Software CD
11. Lens Cover
13. Scart Adapter(Option)
14. Extended life Battery
12. Neck Strap
Plus Advantage, MP3
With the CAM, you can playback the MP3 file stored in the internal memory, Memory Stick and Memory Stick Pro(Option).
Enjoy your favourite songs with the MP3 files with the CAM.
12
ENGLISH
Pack(Option)
13
VP-M102 UK_0-Start 2004.12.20 11:34 AM Page 14
ENGLISH
ENGLISH
Name of Each Part
Name of Each Part
Rear & Left View
Right & Bottom View
7. Back/Multi-Play
6.
Back( ) / Left / Multi-Play
Mode button
Mode button
1. Built-in MIC
Hanging Lens Cover on the CAM
7. switch
8.
[▲ ]switch
(Zoom
(Zoom
out (W)
out//RPS
Rewind
switch)
( ) switch)
9. OK button
8.
button(Play,
(Play/Pause)
Pause)
9. [▼ ]switch (Zoom in/ FPS switch)
11. Record/Stop
10.
Record/Stopbutton
button
2. LCD Monitor
1. Lens
12. Record/Power/Charging
11.
Power / Charging indicator
indicator
6. Volume +, - / MF button
2. Light
13. Power
12.
OFF switch
switch
/ Mode
/ ModeSelector
Selector
14. Menu button
13.
/MF
3. Earphones and
AV Input/Output Jack
7. Tripod Receptacle
4. Battery insertion part
8. Cradle Receptacle
15. Memory Stick Slot
14.
4. LCD(DISPLAY)
3. DISPLAY button
5.4.MP3
MP3LOCK
Hold switch
5. Battery eject button
6. Built-in Speaker
5.
1
2
3
4
5
6
7
14
Built-in MIC
LCD Monitor
DISPLAY button
MP3 Hold switch
Built-in Speaker
Back/Multi-Play Mode button
[▲ ]switch (Zoom out/RPS switch)
8
9
10
11
12
13
14
OK button (Play/Pause)
[▼ ]switch (Zoom in/ FPS switch)
Record /Stop button
Record/Power /Charging indicator
Power switch/Mode Selector
Menu button
Memory Stick Slot
1
2
3
4
5
Lens
Light
Earphones and AV Input/Output Jack
Battery insertion part
Battery eject button
9. Strap Hook
6
7
8
9
Volume +, - / MF button
Tripod Receptacle
Cradle Receptacle
Strap Hook
15
VP-M102 UK_0-Start 2004.12.20 11:34 AM Page 16
ENGLISH
ENGLISH
Name of Each Part: LCD Display
Name of Each Part: LCD Display
OSD (On Screen Display in Video Record Mode / Video Play Mode)
OSD (On Screen Display in Photo Capture Mode / Photo View Mode)
Video Record Mode
15 14
1
2
3
Video Record
Video Play Mode
13
6
12
SF / 720
1
Photo Capture Mode
12
5
Video Play 100-0056
4
1
2
3
Video Play 100-0056
3
2
4
5
Video Play Mode
10
5
6
7
8.
9.
10.
11.
12.
13.
14.
15.
STBY Sepia
8
9
1
Photo View 100-0025
3
2
7
BLC
Mode indicator
EIS indicator
Program AE indicator
White Balance indicator
BLC indicator
Focus indicator
Counter
(Elapsed time /Remaining time)
Record/Standby indicator
Record/Standby text
Effect indicator
Zoom in/Zoom out indicator
Battery life indicator
Memory type indicator
Image quality/size indicator
Warning and note indicator
Sepia
00:16 / 10:50
8
10
1.
2.
3.
4.
5.
6.
Mode indicator
Current display indicator
Lock indicator
Battery life indicator
Memory type indicator
Image counter(Current image)
2 Copies
9
7.
8.
Warning and note indicator
Counter
(Elapsed time / Recorded time)
9. Operation indicator
(Play/Pause/RPS/FPS)
10. Volume indicator
4
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
Note
✤
16
6
8
6
00:16 / 24:32
1.
2.
3.
4.
5.
6.
7.
Photo View Mode
9
800
4
7
11
BLC
11 10
Photo Capture
Photo View Mode
Functions you’ve set will not be canceled if you turn the CAM on again.
Mode indicator
EIS indicator
Program AE indicator
White balance indicator
BLC indicator
Focus indicator
Zoom in/out indicator
Battery life indicator
Memory type indicator
Image size indicator
Warning and note indicator
Light indicator
1.
2.
3.
Mode indicator
Current display indicator
Number of print
4.
5.
6.
5
Printer indicator
Lock indicator
Image counter (Current image)
Note
✤
Functions you’ve set will not be canceled if you turn the CAM on again.
17
VP-M102 UK_0-Start 2004.12.20 11:35 AM Page 18
ENGLISH
ENGLISH
Name of Each Part: LCD Display
How to Use the Battery Pack
OSD (On Screen Display in MP3 Play Mode / Voice Record / Play Mode)
Battery Pack Installation / Ejection
It is recommended you purchase one or more additional battery packs to allow continuous use of your CAM.
MP3 Play Mode
Voice Record Mode
Voice Play Mode
To insert the battery pack
11
9
Slide the battery pack into the groove until it clicks.
MP3 Play
1
1
3
2. I belive I can fly.mp3
3.6 Mbytes
4
Stereo 44.1KHz 128Kbps
2
10
2
3
8
Voice Play
Voice Record
2 2004/01/01 12:51:04 AM
5.0Mbytes
Stereo 8KHz 128Kbps
2 2004/01/01 12:51:04 AM
Stereo 8KHz 128Kbps
5
6
4
00:34 / 03:46
Mode indicator
File number/ File name/File format
File size
Sampling Rate/Bit Rate
Progress Bar
Elapsed time/Full time
Operation indicator
Volume indicator
Battery life indicator
Memory type indicator
Repeat all/one indicator
00:00:12 / 00:05:12
1.
2.
3.
4.
5.
6.
00:00:12 / 00:05:12
REC
5
7
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
9
7
To eject the battery pack
6
Mode indicator
File number/Date and Time
Sampling Rate/Bit Rate
Elapsed time/Full time
Operation indicator
Record/Standby text
8
7.
8.
9.
Pull the [Battery Eject] button to eject the battery pack.
Progress Bar
Lock indicator
Volume indicator
Note
✤
Clean the terminals to remove foreign substances before inserting the battery pack.
Note
✤
18
Functions you’ve set will not be canceled if you turn the CAM on again.
19
VP-M102 UK_0-Start 2004.12.20 11:35 AM Page 20
ENGLISH
How to Use the Battery Pack
ENGLISH
How to Use the Battery Pack
Maintain the Battery Pack
✤
✤
✤
✤
✤
✤
The battery pack should be recharged in an environment of between 32°F(0°C) and 104°F(40°C).
The battery pack should never be charged in a room temperature that is below 32°F(0°C).
The life and capacity of the battery pack will be reduced if it is used in temperatures below 32°F(0°C) or left in temperatures
above 104°F(40°C) for a long period.
Do not put the battery pack near any heat sources (fire or flames, for example).
Do not disassemble, process, press or heat the Battery Pack.
Do not allow the + and - terminals of the battery pack to be short-circuited. It may cause leakage, heat generation,
induce fire and overheating.
Continuous recording time based on battery type
If you close the LCD screen, it switches off automatically.
The continuous recording time given in the table below is approximations. Actual recording time depends on usage.
Time
Battery
SB-P90A (900mAh)
SB-P180A (1800mAh) (option)
Continuous Recording Time
LCD ON
LCD OFF
60 min.
80 min.
120 min.
160 min.
Notes
✤
✤
✤
Prepare an extra battery if you use the CAM outdoors.
Contact the Samsung service centre to purchase new battery pack.
If you zoom in or out, the recording time becomes shorter.
Warning
✤
20
When you eject the battery pack from the CAM, hold the battery pack to prevent it dropping to the floor.
21
VP-M102 UK_0-Start 2004.12.20 11:35 AM Page 22
ENGLISH
ENGLISH
How to Use the Battery Pack
How to Use the Battery Pack
Charging the Battery Pack
Battery Level Display
The Battery Level Display shows the amount of battery power remaining in the Battery Pack.
Battery Level Indicator
Message
State
Fully charged
-
40~60% used
-
60~80% used
-
80~95% used
-
Exhausted(flickers)
The device will soon turn off.
Change the Battery Pack
as soon as possible.
-
(flickers)
The device will be forced to
turn off after 5 seconds.
“Battery Low”
Video Play 100-0056
1.
Move [Mode Selector] up to turn the CAM off.
2.
Attach the Battery Pack to the CAM.
3.
Fix the CAM into the cradle.
4.
Connect the jack with the cradle.
◆ Detach the jack by pressing the buttons of the jack.
5.
Insert the AC power adapter into the outlet.
Charging through the cradle
Note
✤
00:16 / 00:32
You can charge the battery pack when you use the CAM.
Connect the AC power adapter with the CAM directly.
Warning
✤
✤
Tips for Battery Identification
Charging directly to the CAM
It is recommended you fully charge the battery pack before use.
You should only charge the battery in an environment between 0°C
and 40°C.
A charge mark is provided on the battery pack to help you remember whether it has been charged or not.
If the battery has been fully charged, the charge indicator is green. If you are charging the battery,
the colour of the charge indicator is orange. The charge indicator flickers if the battery is abnormal.
Charging time based on battery type
Capacity
SB-P90A (900mAh)
SB-P180A (1800mAh) (option)
22
Power On
6 hr. 30 min
13 hr.
Power Off
1 hr. 40 min
3 hr. 20 min
23
VP-M102 UK_0-Start 2004.12.20 11:35 AM Page 24
ENGLISH
ENGLISH
Getting Started
Getting Started
The Colour of the LED
Before You Start Operating the CAM
Before using the CAM, refer to this page for easy operation. The Memory Stick is an optional accessory.
The colour of the LED varies depending on the state of power or charging.
When the AC Adapter is plugged in
LED Colour
Red
Green
Orange
Green
Orange Blink
Power
Voice / Video Record
On
Off
Off
-
Charging state
Charging
Fully charged
Error
When the AC Adapter is unplugged
LED Colour
Green
Off
Red
Power
On
Off
Voice / Video Record
Using Hardware Reset Function
◆ You can select Video mode or Previous mode as the start-up mode in System Settings. (Refer to page 94)
4. Move the [▲ /▼ ] switch to select the desired mode and press the [OK] button.
5. Press the [OK] button to take pictures, record, hear music or record voice.
Press the [Menu] button to view the menu.
6. When you finished, turn the CAM off moving [Mode Selector] up.
For example:If you want to select Photo Mode
Mode Selection
Mode Selection
1
2
Video
MP3
Photo
Voice Recorder
1.
Remove the battery pack and the AC adapter.
3
MP3
4
Voice Recorder
6
2.
Turn the LCD monitor at an angle of 270°.
5
File Browser
7
3.
the CAM is reset and turns on.
Notes
✤
✤
File Browser
System Settings
Back
Press the [Display] button.
◆ If you connect the AC adapter or insert the battery pack again,
24
Charging state
-
1. Install the battery pack and insert the Memory Stick into the Memory Stick slot. (Refer to page 33)
2. Charge the battery pack by fixing the CAM into the cradle and connecting the power cable to the
cradle. (Refer to page 23)
3. Move [Mode Selector] down to turn on the CAM and move it down again.
If the LCD monitor is closed completely, the CAM makes a sound.
If you reset the CAM, all functions you set are initialized.
1.
2.
3.
4.
5.
6.
7.
Video: You can record and play video files.
Photo: You can take and view photo files.
MP3: You can download and hear the music.
Voice Recorder: You can record and hear the voice.
File Browser: You can delete, lock, copy the file and view the file information.
System Settings: You can set the LCD monitor brightness/colour, date/time, system and memory.
Back: The screen moves to previous menu in the selected mode.
25
VP-M102 UK_0-Start 2004.12.20 11:35 AM Page 26
ENGLISH
ENGLISH
Getting Started
Getting Started
Using the Function Button
Using the Display button
The Function button is used to make a selection, move the cursor, select the functions and exit from the menu.
You can use various functions pressing the [Display] button.
1. Open the LCD monitor.
2. Move [Mode Selector] down to turn on the CAM.
The Use of Various Function button
Recording /
Picture taking
Button
Playing/Viewing
◆ The video screen appears.
◆ You can select Video mode or Previous mode as the start-up mode in System Settings. (Refer to page 94)
Selecting
3. Press the [Display] button.
Select up
Zoom out (▲ )
RPS (
)
Select up
Zoom in (▼)
FPS (
)
Select down
Record / Capture Help
Multi-Play screen
Multi-Play screen
Return to previous
menu
Change from Record/
Capture to Play/View
Play/Pause
Confirm selecting
Return to
previous menu
✤
If there is no file when you press the [OK] button in Video Record/Photo
Capture, no change occurs.
Refer to page 39 for further details about the function button.
The Use of [Back] and [Menu] button
Button
Video Record/ Photo Capture
Video Play/ Photo View
Move to Video Play/
Photo View
Move to Video Recoed/
Photo Capture
Move to <Settings>
Move to <File Options>
Select Mode
Record/Capture Help
Select menu
Select down
Play Mode
Play Last
26
Select
Back
Down
Zoom In
Record
Off
Select menu
If you press the [Display] button
✤
✤
✤
✤
Once: The display indicators turn off.
Twice: The back light turns off.
3 times: It returns to the initial screen.
Hold down the button for 2 seconds:
The [Help] screen according to each
mode appears.
Mode
Selection
Off
Menu
Play Help
Play Help
Time/Date Dialog Help
Prev./Rew
Up
Cancel
Next
Back
Play
Next/FF
Down
Mode
Selection
Open/Close
Menu
Close Mode
Selection
Time/ Date Dialog Help
Off
Off
(Press for about
2 seconds)
Up
Zoom Out
Note
✤
Select Mode Help
Menu
Mode
Selection
Menu
27
VP-M102 UK_0-Start 2004.12.20 11:35 AM Page 28
ENGLISH
ENGLISH
Getting Started
Getting Started
Adjusting the LCD Monitor
Structure of the Folders and Files
Your the CAM is equipped with a colour Liquid Crystal Display monitor, which enables you to view directly what you are
recording or playing back. Depending on the conditions under which you are using the CAM (indoors or outdoors for example),
you can adjust the LCD Brightness or Colour.
The video files and photo files are stored in internal memory, Memory Stick or Memory Stick Pro as below.
1. Move [Mode Selector] down to turn on the CAM and move it down again.
✤
✤
✤
✤
◆ The Mode Selection screen appears.
2. Move the [ ▲ /▼ ] switch to select System Settings and press the [OK] button.
2
Mode Selection
MP3
Notes
Voice Recorder
File Browser
System Settings
Back
3. Move the [ ▲ /▼ ] switch to select <Display> and press the [OK] button.
3
System Settings
Display
Date / Time
✤
✤
✤
✤
System
Memory
Refer to page 33 for details about Memory Stick.
You can store general data in files and folders of the CAM.
The number of the file is up to 9,999 and folder is up to 100.
DCAM✽✽✽✽.JPG: Photo file
SMOV✽✽✽✽.AVI: Video file
SWAV✽✽✽✽.WAV: Voice file
✽✽✽✽✽✽✽✽.MP3: MP3 file
MISC: DPOF files are stored.
Do not change the file or folder name except ’Free’.
You can freely change the file or folder name of ’Free’.
Video files that you have not made with the CAM may not
be able to be played.
4
◆ Refer to page 86~87 for details.
999SSDVC
MISC
Free.MP3
MP3
SSMOV
✤
Settings: Display
LCD Brightness 20 %
LCD Colour
60 %
✤
Do not turn the power off while recording, playing, erasing
file or formatting the Memory Stick.
Please turn the power off before you insert or eject the
Memory Stick to avoid losing data.
Save important files separately.
✤ If you select [Back] in the menu, the previous menu appears.
✤ If it is too bright, adjust the LCD Brightness.
28
100SSMOV
..
.
SMOV0001.AVI
...
SMOV9999.AVI
999SSMOV
VOICE
Back
Notes
Free
Free
✤
5
DCAM0001.JPG
..
.
DCAM9999.JPG
Warning
50%
Back
DCAM0001.JPG
..
.
DCAM9999.JPG
AVTRINT.MRK
Settings: Display
LCD Brightness 20%
LCD Colour
5. Move the [ ▲ /▼ ] switch to select desired brightness or colour and
press the [OK] button.
100SSDVC
101SSDVC
..
.
MSAMSUNG
Back
4. Move the [ ▲ /▼ ] switch to select <LCD Brightness> or <LCD Colour> and
press the [OK] button.
DCIM
MEMSTICK.IND
MSTK_PRO.IND
100SSWAV
..
.
SWAV0001.WAV
...
SWAV9999.WAV
999SSWAV
29
VP-M102 UK_0-Start 2004.12.20 11:35 AM Page 30
ENGLISH
ENGLISH
Getting Started
Getting Started
Recording Time and Capacity
Number of Photo Capture
Video Record Time
Super Fine
Media
Fine
Quality
Normal
Capacity
Media
352
720
352
720
352
256MB(VP-M102) approx. 10min. approx. 5min. approx. 16min. approx. 8min. approx. 32min.
Internal Memory 512MB(VP-M105) approx. 21min. approx. 10min. approx. 32min. approx. 16min. approx. 65min.
1GB(VP-M110) approx. 44min. approx. 22min. approx. 66min. approx. 33min. approx. 132mi.
X
X
approx. 2min.
X
approx. 4min.
32MB
Memory Stick
X
approx. 8min.
X
approx. 4min.
X
64MB
8min.
X
X
approx.
X
approx. 16min.
128MB
5min.
15min.
7min.
approx.
approx.
10min.
approx. 30min.
approx.
approx.
256MB
Memory Stick Pro
approx. 20min. approx. 10min. approx. 31min. approx. 15min. approx. 62min.
512MB
1GB
Voice Record Time
720
800✕600
approx. 16min.
approx. 32min.
approx. 66min.
approx. 2min.
approx. 4min.
Internal
Memory
Memory Stick
approx. 8min.
approx. 15min.
approx. 31min.
approx. 42min. approx. 21min. approx. 63min. approx. 31min. approx. 126min.approxv63min.
Capacity
Memory Stick
Pro
Media
Capacity
Internal Memory
256MB
512MB
approx. 4hr.
approx. 8hr.
1GB
32MB
approx. 18hr.
approx. 33min.
approx. 1hr.
Time
640✕480
256MB approx. 2509
512MB approx. 5019
1GB approx. 9803
32MB approx. 313
approx. 4129
approx. 8258
64MB approx. 627
128MB approx. 1254
256MB approx. 2509
512MB approx. 5019
1GB approx. 9803
approx. 1032
approx. 2064
approx. 4129
approx. 16129
approx. 516
approx. 8258
approx. 16129
Memory Stick
Memory Stick
Pro
64MB
128MB
256MB
512MB
1GB
approx. 2hr.
approx. 4hr.
approx. 8hr.
approx. 17hr.
Warning
Notes
✤
✤
✤
✤
✤
30
The compressibility is changed automatically depending on the recorded images and the maximum recording time and
capacity can be changed in ‘Video Record’.
You may be not able to record or play normal video files if you use the Memory Stick over 1GB capacity.
You can record video files with size of 720/Normal, 352/Fine and 352/Normal in the Memory Stick but
the quality is not guaranteed.
If you record video files with the quality of Normal(352/720) in the internal memory, Memory Stick or
Memory Stick Pro, the recording time becomes longer but the video may have lower quality than other quality level.
The recording time and capacity may vary by generating the bad sector when you record video files
in the Memory Stick and Memory Stick Pro.
✤
✤
✤
✤
The recording time and capacity is an approximation.
You can format the Memory Stick on the CAM. (Refer to page 99)
Do not format the Memory Stick or Memory Stick Pro on the PC.
The recording time and the number of images shown are maximum figures based on using one function.
In actual use, using more than one function will reduce the capacity of each.
✤ If you set the light, you can take fewer photos than mentioned number of image.
✤ If you format the Memory Stick or Memory Stick Pro, use the Memory Stick Formatter in the supplied
software CD.
31
VP-M102 UK_0-Start 2004.12.20 11:35 AM Page 32
ENGLISH
ENGLISH
Getting Started
Getting Started
Selecting the Memory Type
Using the Memory Stick
You can select the memory type - internal memory or external memory(Memory Stick, Memory Stick Pro).
The Memory Stick is an optional accessory.
3 Mode Selection
The video file and the photo files are stored in internal memory by default.
Inserting a Memory Stick
MP3
1. Insert the Memory Stick. (Refer to page 33)
2. Move [Mode Selector] down to turn on the CAM and move it down again.
Voice Recorder
File Browser
◆ The Mode Selection screen appears.
System Settings
3. Move the [ ▲ /▼ ] switch to select System Settings and press the [OK] button.
4
4. Move the [ ▲ /▼ ] switch to select <Memory> and press the [OK] button.
Back
System Settings
Display
1.
2.
3.
4.
System
Memory
Back
Settings: Memory
Storage Type
Internal
Format
Internal
Memory Space 000MB/000MB
Back
6. Move the [ ▲ /▼ ] switch to select desired type and press the [OK] button.
6
◆ You can select external or internal memory.
Note
Settings: Memory
Storage Type
External
Format
Internal
Memory Space 000MB/000MB
Back
✤ If you insert the Memory Stick or Memory Stick Pro, the memory type selection screen appears automatically.
32
Open the LCD monitor.
Open the Memory Stick slot lid.
Insert the Memory Stick into the slot until it softly clicks.
Close the slot lid.
The pop-up screen appears.
◆ If you select <OK>, the memory type changes to ‘External’ and
if you select ‘Cancel’, files are stored in internal memory continuously.
◆ If you insert locked Memory Stick, the [ ] icon is displayed
next to the memory type indicator.
Video Record
SF / 720
External memory inserted.
Do you want to change
memory to external?
BLC
OK
Cancel
00:16 / 24:32
HOLD
Ejecting a Memory Stick
Date / Time
5. Move the [ ▲ /▼ ] switch to select <Storage Type> and press the [OK] button. 5
1.
2.
3.
4.
5.
HOLD
Open the LCD monitor.
Open the Memory Stick slot lid.
Slightly push the Memory Stick inwards to pop it out.
Pull the Memory Stick out of the slot and close the lid.
Notes
The Memory Stick View
✤
✤
✤
✤
✤
✤
✤
✤
Do not apply excessive force when you insert / eject the Memory Stick.
Do not turn the power off while recording, playing, erasing files or formatting the Memory Stick.
Please turn the power off before you insert or eject the Memory Stick to avoid losing data.
Do not place the Memory Stick near a strong electro-magnetic device.
Do not allow metal substances to come in contact with the terminals on the Memory Stick.
Do not bend the Memory Stick.
After pulling the card out from the CAM, keep the Memory Sticks in a soft case to prevent static shock.
The data stored on the card may be changed or lost as a result of misuse, static electricity,
electric noise or repair. Save important files separately.
✤ Samsung is not responsible for data loss due to misuse.
Terminals
Write-protect
Switch
✤ Memory Stick and
are trademarks of Sony Corporation.
✤ All other product names mentioned herein may be the trademarks or registered
trademarks of their respective companies. TM will not be mentioned in every
instance in this manual.
33
VP-M102 UK_0-Start 2004.12.20 11:35 AM Page 34
ENGLISH
Getting Started
Mode and Menu Selection
You can select the mode and menu as follows. There are 2 ways of selecting menu. Select the way you prefer.
Mode Selection
1.
Select the modes moving the [ ▲ /▼ ] switch and pressing the [OK] button.
Menu Selection
1.
Select the menus moving the [ ▲ /▼ ] switch.
2.
Select the menus pressing [Menu] button after pressing the [OK] button.
◆ The menu screen appears.
SPECIAL OPERATION
1. Press the [Menu] button for 2 seconds.
◆ The menu screen of the selected mode appears.
Note
✤ User’s manual only describes the first way of performing an operation.
There may be other and more convenient ways for you to use the CAM.
1
Video Mode
Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Zooming In and Out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Playing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Playing on the LCD Monitor . . . . . . . . . . . . . . . . . . . . . . . 38
Selecting File Options . . . . . . . . . . . . . . . . . . . . . . . . . 40
Deleting Video files . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Locking Video files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Copying Video files . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting the PB Option . . . . . . . . . . . . . . . . . . . . . . . . . . .
40
41
42
43
Setting Various Functions . . . . . . . . . . . . . . . . . . . . . 44
Setting the Video file Size . . . . . . . . . . . . . . . . . . . . . . . .
Setting the Video file Quailty . . . . . . . . . . . . . . . . . . . . . .
Setting the Focus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting the EIS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting the White Balance . . . . . . . . . . . . . . . . . . . . . . . .
Setting the Program AE . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting the BLC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting the Effect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting the Digital Zoom . . . . . . . . . . . . . . . . . . . . . . . . . .
44
45
46
47
48
49
50
51
52
Note
✤ You can set the time and date in System Settings. Refer to pages 88~89.
34
35
VP-M102 UK_1-Video 2004.12.20 11:35 AM Page 36
ENGLISH
ENGLISH
Video Mode : Recording
Video Mode : Recording
Recording
Zooming In and Out
You can record moving person and objects and store it in memory.
1.
Move [Mode Selector] down to turn on the CAM.
◆ The Video Record screen appears.
◆ You can select Video mode or Previous mode as the start-up mode in System Settings.
Zooming technique lets you change the size of the subject captured in a scene.
1
Video Record
00:00 / 10:57
Press [Record/Stop] button to start recording.
Move [Mode Selector] down to turn on the CAM.
◆ You can select Video mode or Previous mode as the start-up mode in System Settings.
2.
BLC
◆ [ ● REC] indicator displays on LCD.
◆ The elapsed time is displayed and it starts recording.
1.
(Refer to page 94)
(Refer to page 94)
2.
SF / 720
2
Video Record
Press the [Record/Stop] button to start recording.
Video Record
SF / 720
Zoom Out
BLC
STBY
SF / 720
Move the [ ▲ /▼ ] switch up to zoom out.
●
00:16 / 10:50
The subject appears farther away
when you zoom out.
Video Record
REC
SF / 720
BLC
00:16 / 10:50
3.
Press the [Record/Stop] button again to stop recording.
◆ It stops recording and the CAM is ready again.
4.
3
Video Record
BLC
REC
Move the [ ▲ /▼ ] switch down to zoom in.
SF / 720
●
Move [Mode Selector] up to turn off the CAM.
00:16 / 10:50
The subject appears closer
when you zoom in.
Video Record
REC
SF / 720
BLC
BLC
00:16 / 10:41
Notes
STBY
Zoom In
Video Record
✤
✤
✤
✤
00:00 / 10:57
36
00:16 / 10:50
If you press the [Record] button and press it in 1 second, new video file is not made.
If the Auto Shut Off is set, the CAM turns off automatically after 5 minutes.
Detach the Battery Pack when you finish recording to prevent unnecessary battery power consumption.
You can check the recording time. Elapsed time Remaining time
STBY
REC
Notes
✤
✤
Frequent use of zooming may result in higher battery power consumption.
Refer to page 52 about Digital Zoom.
37
VP-M102 UK_1-Video 2004.12.20 11:35 AM Page 38
ENGLISH
ENGLISH
Video Mode : Playing
Video Mode : Playing
The button and switch you use when playing the video file
Playing on the LCD Monitor
It is handy and practical to view video files using the LCD monitor almost anywhere such as in a car, indoors or outdoors.
1.
Move [Mode Selector] down to turn on the CAM.
1
Video Record
SF / 720
◆ The Video Record screen appears.
◆ You can select Video mode or Previous mode as the start-up mode in System Settings.
(Refer to page 94)
BLC
00:16 / 10:41
2.
Press the [Menu] button and move the [ ▲ /▼ ] switch.
Press the [OK] button after selecting <Play>.
2
Video Record
STBY
[OK] Button: Play or pause the video file
[▲ ] Switch: In Video Record mode: Press it to move to previous file.
Press and hold it to use RPS function. (RPS rate: -x2, -x4, -x8, -x16, -x32, -x64, -x128)
[▼ ] Switch: In Video Record mode: Press it to move to next file.
Press and hold it to use FPS function. (FPS rate: x2, x4, x8, x16, x32, x64, x128)
In Video Play mode: Press it and hold it to play slowly when paused.
Press it to move to the next frame when paused.
Adjusting the Sound
SF / 720
1.
Press the [OK] button to play the video file.
Record
1
Video Play 100-0056
Play
Settings
Back
00:16 / 10:41
3.
Move the [ ▲ /▼ ] switch to find the video file you want to play.
◆ Each time you move the [ ▲ /▼ ] switch, the frame moves horizontally.
◆ Each time you press the [+]/[ - ] button, a page(6 frame) moves.
4.
Press [OK] button to play the video file you want.
◆ Each time you press the [OK] button, play or pause is selected repeatedly.
5.
3
STBY
2.
Press the [+] button to increase the volume.
◆ Each time you press the [+] button, the volume bar increases and the sound level will get louder.
◆ The volume bar disappears after 1~2 seconds.
Video Play 100-0056
3.
Press the [-] button to decrease the volume.
00:01 / 00:16
2
Video Play 100-0056
◆ Each time you press the [-] button, the volume bar decreases and the sound level will get quieter.
◆ The volume bar disappears after 1~2 seconds.
4
00:01 / 00:16
Video Play 100-0056
Notes
Press the [Back] button after pressing the [OK] button to stop playing.
✤
✤
✤
You can adjust the volume up to 10 steps.
You can also play the video file on a TV screen by connecting the CAM to a TV. (Refer to page 106)
It is necessary to install Image Mixer for playback the CAM recorded video files on your PC.
00:01 / 00:16
38
39
VP-M102 UK_1-Video 2004.12.20 11:35 AM Page 40
ENGLISH
ENGLISH
Video Mode : Selecting File Options
Video Mode : Selecting File Options
Deleting Video files
Locking Video files
You can delete video files in <File Options>.
1.
Move [Mode Selector] down to turn on the CAM.
◆ The Video Record screen appears.
◆ You can select Video mode or Previous mode as the start-up mode in System Settings.
You can lock the important video file to prevent accidental deletion.
2
Video Record
1.
SF / 720
◆ The Video Record screen appears.
◆ You can select Video mode or Previous mode as the start-up mode in System Settings.
Record
Play
(Refer to page 94)
Back
Press the [Menu] button and move the [ ▲ /▼ ] switch.
Press the [OK] button after selecting [Play].
3.
4.
Move the [ ▲ /▼ ] switch to select the video file you want to delete.
4
Press the [Menu] button to select <File Options> and press the [OK] button.
2.
Press the [Menu] button and move the [ ▲ /▼ ] switch.
Press the [OK] button after selecting <Play>.
3.
4.
Move the [ ▲ /▼ ] switch to select the video file you want to lock.
Press the [Menu] button to select <File Options> and press the [OK] button.
STBY
00:00 / 10:57
Video Play 100-0056
Record
Play
◆ You can select <File Options> only in <Play>.
2
01
File Options
Settings
Back
00:00 / 10:57
4
Move the [ ▲ /▼ ] switch to select <Delete> and press the [OK] button.
5
Play
File Options
5.
Video Play 100-0056
01
Copy To
PB Option
Move the [ ▲ /▼ ] switch to select the followings. Press the [OK] button.
Move the [ ▲ /▼ ] switch to select <Lock> and press the [OK] button.
5
Note
40
Press and hold the [Menu] button in Video Play, you can move to <File Options> directly.
Copy To
6.
01
Copy To ext.
Selected
Back
All
Cancel
01
03
PB Option
Back
Move the [ ▲ /▼ ] switch to select the followings and press the [OK] button.
◆ Selected: The selected video file is locked.
◆ All: All video files are locked.
◆ Cancel: Cancel locking video files.
Video Play 100-0056
Delete
Deleting file(s)...
Lock
✤
Video Play 100-0056
Lock
03
Back
6
03
Delete
Lock
◆ Selected: The selected video file is deleted.
◆ All: All video files are deleted.
◆ Cancel: Cancel deleting video files.
01
Back
Delete
6.
STBY
Video Play 100-0056
Record
Back
5.
SF / 720
Play
◆ You can select <File Options> only in <Play>.
03
Video Record
Record
(Refer to page 94)
Settings
2.
Move [Mode Selector] down to turn on the CAM.
6
Video Play 100-0056
Delete
Choose the file(s) you would
Lock
to lock.
03
Notes
✤
✤
Press and hold the [Menu] button in Video Play, you can move to <File Options> directly.
The <
> icon is displayed on the locked file.
01
Copy To ext.
Selected
DPOF
All
Cancel
Back
03
41
VP-M102 UK_1-Video 2004.12.20 11:35 AM Page 42
ENGLISH
ENGLISH
Video Mode : Selecting File Options
Video Mode : Selecting File Options
Copying Video files
Setting the PB Option
You can copy the video file to the internal or external memory.
1.
Move [Mode Selector] down to turn on the CAM.
◆ The Video Record screen appears.
◆ You can select Video mode or Previous mode as the start-up mode in System Settings.
You can play all files continuously or play only selected file.
2
Press the [Menu] button and move the [ ▲ /▼ ] switch.
Press the [OK] button after selecting <Play>.
3.
4.
Move the [ ▲ /▼ ] switch to select the video file you want to copy.
Press the [Menu] button to select <File Options> and press the [OK] button.
1.
SF / 720
Play
Back
00:00 / 10:57
Play
File Options
2.
Press the [Menu] button and move the [ ▲ /▼ ] switch.
Press the [OK] button after selecting <Play>.
3.
4.
Move the [ ▲ /▼ ] switch to select the video file you want to set the function.
Press the [Menu] button to select <File Options> and press the [OK] button.
STBY
Video Play 100-0056
Record
◆ You can select <File Options> only in <Play>.
2
01
Settings
Back
00:00 / 10:57
4
Press the [ ▲ /▼ ] switch to select <Copy To> and press the [OK] button.
◆ If you selected the Storage type ‘External’, the file is copied to ‘Internal’.
5
Play
File Options
6.
6
Press the [▲ /▼ ] switch to select <PB Option> and press the [OK] button.
01
✤
42
Press and hold the [Menu] button in Video Play, you can move to <File Options> directly.
5
Video
ideo Play 100-0056
Lock
03
Copy To
6.
◆ Selected: Play the selected video file.
◆ All: Play all video files.
◆ Cancel: Cancel setting PB Option.
Video Play 100-0056
Choose the file(s) to copy
to memory stick?
01
03
PB Option
Back
Move the [▲ /▼ ] switch to select the following and press the [OK] button.
6
Video
ideo Play 100-0056
Would you like to play
only selected file or
all files?
Selected
Selected
Note
03
Delete
PB Option
Back
Move the [ ▲ /▼ ] switch to select the followings and press the [OK] button.
◆ Selected: Copy the selected video file.
◆ All: Copy all video files.
◆ Cancel: Cancel copying video files.
5.
Delete
Copy To
01
Back
Video Play 100-0056
Lock
STBY
Video Play 100-0056
Record
Back
5.
SF / 720
Play
◆ You can select <File Options> only in <Play>.
03
Video Record
Record
(Refer to page 94)
Settings
4
Move [Mode Selector] down to turn on the CAM.
◆ The Video Record screen appears.
◆ You can select Video mode or Previous mode as the start-up mode in System Settings.
Record
(Refer to page 94)
2.
Video Record
All
Cancel
Note
✤
All
Cancel
Press and hold the [Menu] button in Video Play, you can move to <File Options> directly.
43
VP-M102 UK_1-Video 2004.12.20 11:35 AM Page 44
ENGLISH
ENGLISH
Video Mode : Setting Various Functions
Video Mode : Setting Various Functions
Setting the Video file Size
You can set the file size for video files. The number of stored files varies depending
on the Memory Stick capacity and video file size.
1.
Setting the Video file Quality
2
Move [Mode Selector] down to turn on the CAM.
3.
1.
Settings
00:00 / 10:57
◆ 720: Select 720 pixel.
◆ 352: Select 352 pixel.
2.
STBY
Video Settings
Size
720
Quality
Super Fine
Focus
AF
EIS
On
3.
Press the [Menu] button and move the [ ▲ /▼ ] switch.
Press the [OK] button after selecting <Settings>.
Move the [ ▲ /▼ ] switch to select <Quality> and press the [OK] button.
5.
Move the [ ▲ /▼ ] switch to select the video file size and
press the [OK] button.
Press the [Menu] button to finish setting.
4
Settings
Back
00:00 / 10:57
3
◆ SF(Super Fine): Select highest quality.
◆ F(Fine): Select high quality.
◆ N(Normal): Select normal quality.
◆ The icon of selected function is displayed.
4.
352
Quality
Super Fine
Focus
AF
EIS
On
5.
Move the [ ▲ /▼ ] switch to select the video file quality and
press the [OK] button.
Press the [Menu] button to finish setting.
Video◆Settings
The icon
4
of selected function is displayed.
White Balance Auto
5
Video Record
STBY
Video Settings
Size
720
Quality
Super Fine
Focus
AF
EIS
On
White Balance Auto
Video Settings
Size
SF / 720
Play
White Balance Auto
4.
Video Record
Record
(Refer to page 94)
Back
3
2
Move [Mode Selector] down to turn on the CAM.
◆ The Video Record screen appears.
◆ You can select Video mode or Previous mode as the start-up mode in System Settings.
Play
(Refer to page 94)
Press the [Menu] button and move the [ ▲ /▼ ] switch.
Press the [OK] button after selecting <Settings>.
Move the [ ▲ /▼ ] switch to select <Size> and press the [OK] button.
SF / 720
Record
◆ The Video Record screen appears.
◆ You can select Video mode or Previous mode as the start-up mode in System Settings.
2.
Video Record
You can set the quality for video files. The number of stored files varies depending
on the Memory Stick capacity and video file quality.
Video Settings
Video Settings
Size
720
Quality
Fine
Focus
AF
EIS
On
White Balance Auto
SF / 352
5
Video Record
Video Settings
F / 720
Notes
Notes
✤
✤
44
If you select <Back> in the menu, the previous menu appears.
Press and hold the [Menu] button in Video Record, you can move to <Settings> directly.
Video Settings
00:00 / 21:54
STBY
✤
✤
✤
If you select <Back> in the menu, the previous menu appears.
If you use the Memory Stick, you can select the size and quality of 720/Normal,
352/Fine and 352/Normal only.
Press and hold the [Menu] button in Video Record, you can move to <Settings> directly.
00:00 / 16:25
STBY
45
VP-M102 UK_1-Video 2004.12.20 11:35 AM Page 46
ENGLISH
ENGLISH
Video Mode : Setting Various Functions
Video Mode : Setting Various Functions
Setting the Focus
You can set the focus depending on the subject or the environment. In most situations,
you can record best using AF(Auto Focus).
1.
Setting the EIS (Electronic Image Stabilizer)
2
Move [Mode Selector] down to turn on the CAM.
Video Record
SF / 720
Record
◆ The Video Record screen appears.
◆ You can select Video mode or Previous mode as the start-up mode in System Settings.
Play
Settings
(Refer to page 94)
Back
3.
4.
5.
Press the [Menu] button and move the [ ▲ /▼ ] switch.
Press the [OK] button after selecting <Settings>.
3
Move the [ ▲ /▼ ] switch to select <Focus> and press the [OK] button.
Quality
Super Fine
◆ AF: Set the focus automatically. When the CAM turns on, AF is selected in default.
◆ MF( ): Set the focus manually.
Focus
AF
EIS
On
4
Manual Focus
Notes
46
If you select <Back> in the menu, the previous menu appears.
Press and hold the [Menu] button in Video Record, you can move to <Settings> directly.
2.
00:00 / 10:57
3
Press the [Menu] button and move the [ ▲ /▼ ] switch.
Press the [OK] button after selecting <Settings>.
White Balance Auto
◆ The icon of selected function is displayed.
◆ If you select the AF, any icon is not displayed.
✤
✤
Settings. (Refer to page 94)
720
Adjust the focus using [ + ] / [ - ] button to zoom in or out manually.
◆ When a picture contains objects that are both close and far away from the CAM.
◆ When a person is enveloped in fog or surrounded by snow.
Move [Mode Selector] down to turn on the CAM.
◆ The Video Record screen appears.
◆ You can select Video mode or Previous mode as the start-up mode in System
STBY
Video Settings
Size
Move the [ ▲ /▼ ] switch to select desired setting and press the [OK] button.
Press the [Menu] button to finish setting.
3.
Video Settings
Size
720
Quality
Super Fine
Focus
MF
EIS
On
Video Record
STBY
Video Settings
Size
720
Quality
Super Fine
Focus
AF
EIS
On
White Balance Auto
Move the [ ▲ /▼ ] switch to select <EIS> and press the [OK] button.
◆ On(
): Set the EIS function.
◆ Off: Cancel the EIS function.
4
Video Settings
Video Settings
Size
720
Quality
Super Fine
Focus
AF
EIS
Off
White Balance Auto
White Balance Auto
5
/ 720
Back
1.
00:00 / 10:57
2.
The Electrical Image Stabilizer is a function that compensates for hand shake and other movements while recording.
EIS provides more stable video when:
Video Record SF
2
◆ Recording with zooming
Record
◆ Recording small objects
Play
◆ Recording while walking or moving
Settings
◆ Recording through the window in the car
4.
5.
SF / 720
Move the [ ▲ /▼ ] switch to select desired setting and press the [OK] button.
Press the [Menu] button to finish setting.
5
Video Record
Video Settings
SF / 720
◆ The icon of selected function is displayed.
Video Settings
BLC
00:00 / 10:57
STBY
Video Settings
Notes
✤
✤
If you select <Back> in the menu, the previous menu appears.
Press and hold the [Menu] button in Video Record, you can move to <Settings> directly.
00:00 / 10:57
STBY
47
VP-M102 UK_1-Video 2004.12.20 11:35 AM Page 48
ENGLISH
ENGLISH
Video Mode : Setting Various Functions
Video Mode : Setting Various Functions
Setting the White Balance
The colour balance may vary depending on the lighting conditions.
The White Balance is used to preserve natural colours under different lighting conditions.
1.
Setting the Program AE (Programmed Auto Exposure)
It allows you to adjust the aperture setting to suit different conditions.
2
Move [Mode Selector] down to turn on the CAM.
◆ The Video Record screen appears.
◆ You can select Video mode or Previous mode as the start-up mode in System Settings.
3.
Press the [Menu] button and move the [ ▲ /▼ ] switch.
Press the [OK] button after selecting <Settings>.
Move the [ ▲ /▼ ] switch to select <White Balance> and press the [OK] button.
Move the [ ▲ /▼ ] switch to select desired setting and press the [OK] button.
1.
Notes
✤
✤
✤
48
If you select <Back> in the menu, the previous menu appears.
Turn the Digital Zoom off for more accurate White Balance setting.
Press and hold the [Menu] button in Video Record, you can move to <Settings> directly.
Play
Settings
00:00 / 10:57
STBY
Press the [Menu] button and move the [ ▲ /▼ ] switch.
Press the [OK] button after selecting <Settings>.
2.
Video Settings
White Balance Auto
4
5
SF / 720
Back
00:00 / 10:57
3
Video Record
Record
Back
Press the [Menu] button to finish setting.
◆ The icon of selected function is displayed.
◆ If you select <Auto>, any icon is not displayed.
2
(Refer to page 94)
3
STBY
Video Settings
White Balance Auto
Program AE
Auto
Program AE
Auto
BLC
Off
BLC
Off
Effect
Off
Effect
Off
Digital Zoom
Off
Digital Zoom
Off
◆ Auto: Auto balance between the subject and background to get the best result. The shutter
Video Settings
Video Settings
Program AE
Auto
BLC
Off
Effect
Off
Digital Zoom
Off
Video Record
Move the [ ▲ /▼ ] switch to select <Program AE> and press the [OK] button.
3.
White Balance Outdoor
5.
Move [Mode Selector] down to turn on the CAM.
◆ The Video Record screen appears.
◆ You can select Video mode or Previous mode as the start-up mode in System Settings.
Settings
◆ Auto: Adjust the colour depending on the condition automatically.
◆ Hold(
): Record with first selected colour without adjusting colour.
◆ Outdoor( ): Record with the balanced light. (Natural light)
◆ Indoor( ): Record with the balanced light. (Glow lamp or light in the studio)
4.
SF / 720
Play
(Refer to page 94)
2.
Video Record
Record
SF / 720
4.
5.
speed automatically varies from 1/60 to 1/250 per second depending on the scene.
◆ Sports( ): For recording fast-moving people or objects. It is suitable for sports events,
4
recording outside in the car.
◆ Spotlight( ): Compensates for a subject that appears too bright under strong direct light
such as spotlight. It is suitable for concert and school performance.
◆ Sand/Snow( ): Use when the light is very strong such as on the beach or in the snow.
◆ HS Shutter( ): Allows fast-moving images to be captured one frame at a time.
Move the [ ▲ /▼ ] switch to select desired setting and press the [OK] button.
Press the [Menu] button to finish setting.
Video Settings
5
Video Settings
Video Settings
White Balance Auto
Program AE
Sports
BLC
Off
Effect
Off
Digital Zoom
Off
Video Record
SF / 720
◆ The icon of selected function is displayed.
◆ If you select <Auto>, any icon is not displayed.
BLC
00:00 / 10:57
Notes
STBY
✤
✤
If you select <Back> in the menu, the previous menu appears.
Press and hold the [Menu] button in Video Record, you can move to <Settings> directly.
Video Settings
BLC
00:00 / 10:57
STBY
49
VP-M102 UK_1-Video 2004.12.20 11:35 AM Page 50
ENGLISH
ENGLISH
Video Mode : Setting Various Functions
Video Mode : Setting Various Functions
Setting the BLC (Backlight Compensation)
The Backlight Compensation function helps to make the subject brighter when the subject is
in front of a window or the subject is too dark to distinguish. You can use this function when
using your the CAM in the bright background and snowy background.
1.
Setting the Effect
You can create professional looking effect on your video file.
2
Video Record
SF / 720
Move [Mode Selector] down to turn on the CAM.
Back
2.
00:00 / 10:57
3.
Move the [ ▲ /▼ ] switch to select <BLC> and press the [OK] button.
◆ On(
): Set the BLC function.
◆ Off: Cancel the BLC function.
4.
5.
Move the [ ▲ /▼ ] switch to select desired setting and press the [OK] button.
Press the [Menu] button to finish setting.
◆<
50
STBY
3.
Video Settings
4
5
Program AE
Auto
BLC
Off
Effect
Off
Digital Zoom
Off
If you select <Back> in the menu, the previous menu appears.
Press and hold the [Menu] button in Video Record, you can move to <Settings> directly.
Press the [Menu] button and move the [ ▲ /▼ ] switch.
Press the [OK] button after selecting <Settings>.
Move the [ ▲ /▼ ] switch to select <Effect> and press the [OK] button.
◆ Off: Cancel the <Effect>.
◆ Art: Artistic effects on your video file.
◆ Mosaic: A mosaic overlay appears on your video file.
◆ Sepia: The picture is displayed in sepia colour similar to that of an old photograph.
◆ Negative: Reverses the colours, creating the look of a negative.
Settings
◆Video
Mirror:
This mode cuts the picture in half using a Mirror effect.
◆ B&W: Changes the images into Black and White.
◆ Emboss: Embossing effects on your video file.
White Balance Auto
Video Settings
Video Record
SF / 720
Record
Play
Settings
Back
00:00 / 10:57
3
STBY
Video Settings
White Balance Auto
4
Program AE
Auto
BLC
Off
Effect
Off
Digital Zoom
Off
Video Settings
Video Settings
White Balance Auto
White Balance Auto
Program AE
Auto
Program AE
Auto
BLC
On
BLC
Off
Effect
Off
Effect
Mirror
Digital Zoom
Off
Digital Zoom
Off
Video Record
SF / 720
4.
Move the [ ▲ /▼ ] switch to select desired setting and press the [OK] button.
5.
Press the [Menu] button to finish setting.
5
Video Record
Video Settings
SF / 720
◆ The letters of selected function is displayed.
> is displayed.
Notes
✤
✤
3
2
(Refer to page 94)
Settings
(Refer to page 94)
Press the [Menu] button and move the [ ▲ /▼ ] switch.
Press the [OK] button after selecting <Settings>.
Move [Mode Selector] down to turn on the CAM.
◆ The Video Record screen appears.
◆ You can select Video mode or Previous mode as the start-up mode in System Settings.
Play
◆ The Video Record screen appears.
◆ You can select Video mode or Previous mode as the start-up mode in System Settings.
2.
1.
Record
Video Settings
BLC
00:00 / 10:57
Notes
STBY
✤
✤
If you select <Back> in the menu, the previous menu appears.
Press and hold the [Menu] button in Video Record, you can move to <Settings> directly.
BLC
00:00 / 10:57
STBY Mirror
51
VP-M102 UK_1-Video 2004.12.20 11:35 AM Page 52
ENGLISH
Video Mode : Setting Various Functions
2
Setting the Digital Zoom
You can magnify optical zoom(x10) digitally. The Digital Zoom processes data to enlarge the centre portion of
the image to fill the frame may produce a less detailed and slightly grainy picture.
Video Record
2
1.
Move [Mode Selector] down to turn on the CAM.
Record
◆ The Video Record screen appears.
◆ You can select Video mode or Previous mode as the start-up mode in System Settings.
Play
SF / 720
Capturing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Capturing Images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Zooming In and Out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Settings
Back
(Refer to page 94)
Viewing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
00:00 / 10:57
2.
Press the [Menu] button and move the [ ▲ /▼ ] switch.
Press the [OK] button after selecting <Settings>.
Photo Mode
3
Viewing Photo files on the LCD Monitor . . . . . . . . . . . . . . 56
STBY
Video Settings
Selecting File Options . . . . . . . . . . . . . . . . . . . . . . . . . 57
Deleting Photo files . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Locking Photo files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting DPOF Function . . . . . . . . . . . . . . . . . . . . . . . . . .
Copying Photo files . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
White Balance Auto
Program AE
Auto
BLC
Off
Effect
Off
Digital Zoom
Off
57
58
59
60
Setting Various Funtions . . . . . . . . . . . . . . . . . . . . . . . 61
3.
Move the [ ▲ /▼ ] switch to select <Digital Zoom> and press the [OK] button. 4
◆ On: Set the Digital Zoom. (X100)
◆ Off: Cancel the Digital Zoom.
4.
5.
Move the [ ▲ /▼ ] switch to select desired setting and press the [OK] button.
Press the [Menu] button to finish setting.
Video Settings
White Balance Auto
5
Program AE
Auto
BLC
Off
Effect
Off
Digital Zoom
On
Video Record
Video Settings
Setting the Photo file Size . . . . . . . . . . . . . . . . . . . . . . . .
Setting the Light . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting the Focus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting the EIS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting the White Balance . . . . . . . . . . . . . . . . . . . . . . . .
Setting the Program AE . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting the BLC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
61
62
63
64
65
66
67
SF / 720
◆ 4 zoom indicators increase after setting the Digital Zoom.
Video Settings
Notes
✤
✤
52
If you select <Back> in the menu, the previous menu appears.
Press and hold the [Menu] button in Video Record, you can move to <Settings> directly.
00:00 / 10:57
STBY
53
VP-M102 UK_2-Photo 2004.12.20 11:36 AM Page 54
ENGLISH
ENGLISH
Photo Mode : Capturing
Photo Mode : Capturing
Capturing Images
Zooming In and Out
You can take photo as well as record video files.
1.
Move [Mode Selector] down to turn on the CAM and move it down again.
◆ The Mode Selection screen appears.
Zooming technique lets you change the size of the subject captured in a scene.
1
1.
Mode Selection
Photo
2.
MP3
Voice Recorder
Move the [ ▲ /▼ ] switch to select Photo mode and press the [OK] button.
◆ The CAM is ready for taking pictures.
◆[
] indicator is displayed on LCD.
2
Photo Capture
Move the [ ▲ /▼ ] switch to select Photo mode
and press the [OK] button.
Press [Record /Stop] button to take pictures.
800
Zoom Out
BLC
800
Move the [ ▲ /▼ ] switch up to zoom out.
●
Capturing...
3.
Photo Capture
◆ To take pictures, press the [Record/Stop] button again.
File Browser
2.
Move [Mode Selector] down to turn on the CAM and move it down again.
◆ The Mode Selection screen appears.
Video
The subject appears farther away
when you zoom out.
Photo Capture
800
Photo Capture
800
Move the [ ▲ /▼ ] switch down to zoom in.
3
Photo Capture
800
●
The subject appears closer
when you zoom in.
Zoom In
Note
✤
54
If the battery is low and the icon blinks, the light is not operated and light icon is set to off state.
Note
✤
Frequent use of zooming may result in higher battery power consumption.
55
Video Record
00:16 / 24:32
VP-M102 UK_2-Photo 2004.12.20 11:36 AM Page 56
ENGLISH
ENGLISH
Photo Mode : Viewing
Photo Mode : Selecting File Options
Viewing Photo files on the LCD Monitor
Deleting Photo files
It is handy and practical to view pictures using the LCD monitor almost anywhere such as in a car, indoors or outdoors.
You can delete photo files in <File Options>.
1.
1.
Move [Mode Selector] down to turn on the CAM and move it down again.
◆ The Mode Selection screen appears.
2.
2
Mode Selection
Video
Move the [ ▲ /▼ ] switch to select Photo mode and press the [OK] button.
Photo
◆ The Photo Capture screen appears.
MP3
2.
3.
File Browser
Press the [Menu] button and move the [ ▲ /▼ ] switch.
Press the [OK] button after selecting <View>.
3
Photo Capture
800
Capture
View
Settings
3
Move the [ ▲ /▼ ] switch to select [Photo] mode and press the [OK] button.
4.
5.
Press the [Menu] button and move the [ ▲ /▼ ] switch.
Press the [OK] button after selecting <View>.
Move the [ ▲ /▼ ] switch to select the photo file you want to delete.
Press the [Menu] button to select <File Options> and press the [OK] button.
Settings
Back
5
Move the [ ▲ /▼ ] switch to find the photo you want to view.
◆ Each time you move the [ ▲ /▼ ] switch, the frame moves horizontally.
◆ Each time you press the [+]/[ - ] button, a page(6 frame) moves.
4
Photo View 100-0022
Capture
View
01
File Options
Back
4.
800
View
◆ You can select <File Options> only in <View>.
Capturing...
Photo Capture
Capture
◆ The Photo Capture screen appears.
Voice Recorder
3.
Move [Mode Selector] down to turn on the CAM and move it down again.
◆ The Mode Selection screen appears.
03
Back
Photo View 100-0022
6.
Move the [ ▲ /▼ ] switch to select <Delete> and press the [OK] button.
6
Photo View 100-0022
Delete
Lock
01
Copy To
03
DPOF
Back
5.
Press [OK] button to view the photo you want.
◆ The full screen displays.
5
Photo View
View 100-0022
7.
Capturing...
Note
✤
56
Display time may vary depending on the picture size.
Move the [ ▲ /▼ ] switch to select the followings and press the [OK] button.
◆ Selected: The selected photo file is deleted.
◆ All: All photo files are deleted.
◆ Cancel: Cancel deleting photo files.
Note
✤
7
Photo View 100-0022
Delete
Deleting file(s)...
Lock
01
Copy To ext.
Selected
DPOF
All
Cancel
Back
03
Press and hold the [Menu] button in Photo View, you can move to <File Options> directly.
57
VP-M102 UK_2-Photo 2004.12.20 11:36 AM Page 58
ENGLISH
ENGLISH
Photo Mode : Selecting File Options
Photo Mode : Selecting File Options
Locking Photo files
Setting DPOF (Digital Print Order Format) Function
You can lock the important photo file not to be deleted.
1.
Move [Mode Selector] down to turn on the CAM and move it down again.
◆ The Mode Selection screen appears.
2.
3
Move the [ ▲ /▼ ] switch to select Photo mode and press the [OK] button.
4.
5.
Press the [Menu] button and move the [ ▲ /▼ ] switch.
Press the [OK] button after selecting <View>.
Move the [ ▲ /▼ ] switch to select the photo file you want to lock.
Press the [Menu] button to select <File Options> and press the [OK] button.
800
1.
Settings
2.
Back
Photo View 100-0022
Capture
View
◆ You can select <File Options> only in <View>.
File Options
3
01
03
4.
5.
Settings
Back
5
Move the [ ▲ /▼ ] switch to select <Lock> and press the [OK] button.
6
View
File Options
6.
Photo View 100-0022
Copy To
7.
◆ Selected: The selected photo file is locked.
◆ All: All photo files are locked.
◆ Cancel: Cancel locking photo files.
✤
✤
58
Press and hold the [Menu] button in Photo View, you can move to <File Options> directly.
The <
> icon is displayed on the locked file.
7.
01
Copy To ext.
Selected
DPOF
All
Cancel
Photo View
View 100-0022
Lock
Copy To
Notes
✤
✤
✤
Press and hold the [Menu] button in Photo View, you can move to <File Options> directly.
Refer to page 116 for further details about printing DPOF files.
You can set copies for DPOF print up to 30.
03
Back
7
03
01
DPOF
Move the [ ▲ /▼ ] switch to select copies you want to print.
Photo View 100-0022
Back
03
Delete
03
Delete
Choose the file(s) you would
Lock
to lock.
Notes
6
Refer to page 32.
01
Back
7
Move the [ ▲ /▼ ] switch to select <DPOF> and press the [OK] button.
◆ You can select <DPOF> only when you’ve selected storage type ‘External’.
DPOF
Move the [ ▲ /▼ ] switch to select the followings and press the [OK] button.
01
Back
Delete
Lock
Photo View
View 100-0022
Capture
Back
6.
800
View
Move the [ ▲ /▼ ] switch to select Photo mode and press the [OK] button.
Press the [Menu] button and move the [ ▲ /▼ ] switch.
Press the [OK] button after selecting <View>.
Move the [ ▲ /▼ ] switch to select the photo file you want to print.
Press the [Menu] button to select <File Options> and press the [OK] button.
Photo Capture
Capture
◆ The Photo Capture screen appears.
3.
5
Move [Mode Selector] down to turn on the CAM and move it down again.
◆ The Mode Selection screen appears.
View
◆ The Photo Capture screen appears.
3.
Photo Capture
Capture
Photo View 100-0022
Delete
0 copies for DPOF print
Lock
Copy To ext.
01
03
DPOF
Press OK to set.
Back
Press Back to cancel.
59
VP-M102 UK_2-Photo 2004.12.20 11:37 AM Page 60
ENGLISH
ENGLISH
Photo Mode : Selecting File Options
Photo Mode : Setting Various Functions
Copying Photo files
Setting the Photo file Size
You can copy photo files to the internal or external memory.
1.
Move [Mode Selector] down to turn on the CAM and move it down again.
◆ The Mode Selection screen appears.
2.
You can set the photo files size. The number of stored files varies depending on the Memory Stick capacity, photo files size.
3
Move the [ ▲ /▼ ] switch to select Photo mode and press the [OK] button.
4.
5.
Press the [Menu] button and move the [ ▲ /▼ ] switch.
Press the [OK] button after selecting <View>.
Move the [ ▲ /▼ ] switch to select the photo file you want to copy.
Press the [Menu] button to select <File Options> and press the [OK] button.
1.
800
2.
Settings
3.
Photo View 100-0022
4.
View
File Options
Move the [ ▲ /▼ ] switch to select Photo mode and press the [OK] button.
Press the [Menu] button and move the [ ▲ /▼ ] switch.
Press the [OK] button after selecting <Settings>.
Move the [ ▲ /▼ ] switch to select <Size> and press the [OK] button.
01
Photo Capture
800
Capture
View
Settings
Back
4
◆ You can select 800x600 or 640x480 size.
Capture
◆ You can select <File Options> only in <View>.
3
◆ The Photo Capture screen appears.
Back
5
Move [Mode Selector] down to turn on the CAM and move it down again.
◆ The Mode Selection screen appears.
View
◆ The Photo Capture screen appears.
3.
Photo Capture
Capture
Photo Settings
Size
Light
03
Back
Auto
Focus
AF
EIS
On
White Balance Auto
6.
Move the [ ▲ /▼ ] switch to select <Copy To> and press the [OK] button.
◆ If you selected the Storage type ‘External’, the file is copied to ‘Internal’.
6
5.
Photo View 100-0022
Move the [ ▲ /▼ ] switch to select desired setting and press the [OK] button.
5
Delete
Lock
Copy To
01
Light
03
DPOF
7.
◆ Selected: Copy the selected photo file.
◆ All: Copy all photo files.
◆ Cancel: Cancel copying photo files.
Note
✤
60
Back
Move the [ ▲ /▼ ] switch to select the followings and press the [OK] button.
Press and hold the [Menu] button in Photo View, you can move to <File Options> directly.
7
Auto
Focus
AF
EIS
On
White Balance Auto
6.
Photo View 100-0022
Delete
Choose the file(s) to copy
Lock
to memory stick?
01
Copy To ext.
Selected
DPOF
All
Cancel
Back
Photo Settings
Size
Press the [Menu] button to finish setting.
6
Photo Capture
640
03
Notes
✤
✤
If you select <Back> in the menu, the previous menu appears.
Press and hold the [Menu] button in Photo View, you can move to <File Options> directly.
61
VP-M102 UK_2-Photo 2004.12.20 11:37 AM Page 62
ENGLISH
ENGLISH
Photo Mode : Setting Various Functions
Photo Mode: Setting Various Functions
Setting the Light
The Light only works in Photo Mode and allows the user to take photographs in dark places
such as during the night, shaded or dark areas and indoors.
1.
2.
Setting the Focus
3
Capture
◆ The Mode Selection screen appears.
View
Move the [ ▲ /▼ ] switch to select Photo mode and press the [OK] button.
Settings
4.
Press the [Menu] button and move the [ ▲ /▼ ] switch.
Press the [OK] button after selecting <Settings>.
Move the [ ▲ /▼ ] switch to select <Light> and press the [OK] button.
800
1.
2.
Back
◆ The Photo Capture screen appears.
3.
Photo Capture
Move [Mode Selector] down to turn on the CAM and move it down again.
You can set the focus depending on the subject or the environment.
In most situations, you can record the best photo using AF(Auto Focus).
Photo Settings
Size
800×600
Light
Auto
Focus
AF
EIS
On
4.
◆ The Mode Selection screen appears.
View
Move the [ ▲ /▼ ] switch to select Photo mode and press the [OK] button.
Settings
Press the [Menu] button and move the [ ▲ /▼ ] switch.
Press the [OK] button after selecting <Settings>.
Move the [ ▲ /▼ ] switch to select desired setting and press the [OK] button.
◆ Auto: Set the light automatically.
◆ On( ): Turn on the light.
◆ Off( ): Turn off the light.
6.
5
800×600
Light
On
4
Focus
AF
EIS
On
6
Photo Capture
800
800×600
Move the [ ▲ /▼ ] switch to select <Focus> and press the [OK] button.
Light
Auto
◆ AF: Set the focus automatically. When the CAM turns on, AF is selected in default.
◆ MF( ): Set the focus manually.
Focus
AF
EIS
On
White Balance Auto
5.
6.
✤
✤
62
If you select <Back> in the menu, the previous menu appears.
Press and hold the [Menu] button in Photo View, you can move to <File Options> directly.
Move the [ ▲ /▼ ] switch to select desired setting and press the [OK] button.
Press the [Menu] button to finish setting.
5
Manual Focus
Adjust the focus using [ + ] / [ - ] button to zoom in or out manually.
◆ When a picture has subjects close and distant to the CAM
◆ When a person is enveloped in fog or surrounded by snow
Photo Settings
Size
800×600
Light
Auto
Focus
MF
EIS
On
White Balance Auto
6
Photo Capture
Notes
Capturing...
Notes
Photo Settings
Size
◆ The icon of selected function is displayed.
◆ If you select the AF, no icon is displayed.
White Balance Auto
Press the [Menu] button to finish setting.
◆ The icon of selected function is displayed.
Photo Settings
Size
800
Back
White Balance Auto
5.
Photo Capture
Capture
◆ The Photo Capture screen appears.
3.
4
3
Move [Mode Selector] down to turn on the CAM and move it down again.
BLC
800
Capturing...
BLC
✤
✤
If you select <Back> in the menu, the previous menu appears.
Press and hold the [Menu] button in Photo View, you can move to <File Options> directly.
63
VP-M102 UK_2-Photo 2004.12.20 11:37 AM Page 64
ENGLISH
ENGLISH
Photo Mode : Setting Various Functions
Photo Mode : Setting Various Functions
Setting the EIS (Electronic Image Stabilizer)
Setting the White Balance
The Electrical Image Stabilizer is a function that compensates for hand shake and other movements while taking pictures.
Refer to page 46 for further details.
800
Photo Capture
3
The colour balance may vary depending on the lighting conditions.
The White Balance is used to preserve natural colours under different lighting conditions.
1.
1.
2.
Move [Mode Selector] down to turn on the CAM and move it down again.
Capture
◆ The Mode Selection screen appears.
View
Move the [ ▲ /▼ ] switch to select Photo mode and press the [OK] button.
Settings
3.
4.
Press the [Menu] button and move the [ ▲ /▼ ] switch.
Press the [OK] button after selecting <Settings>.
2.
Back
◆ The Photo Capture screen appears.
Photo Settings
Size
800 x 600
Move the [ ▲ /▼ ] switch to select <EIS> and press the [OK] button.
Light
Auto
◆ On(
): Set the EIS function.
◆ Off: Cancel the EIS function.
Focus
AF
EIS
On
Move the [ ▲ /▼ ] switch to select desired setting and press the [OK] button.
5
◆ The Mode Selection screen appears.
View
Move the [ ▲ /▼ ] switch to select Photo mode and press the [OK] button.
Settings
Press the [Menu] button and move the [ ▲ /▼ ] switch.
Press the [OK] button after selecting <Settings>.
4.
4
Press the [Menu] button to finish setting.
6
Photo Settings
800 x 600
Move the [ ▲ /▼ ] switch to select <White Balance> and press the [OK] button.
Light
Auto
◆ Auto: Adjust the colour depending on the condition automatically.
◆ Hold(
): Record with first selected colour without adjusting colour.
◆ Outdoor( ): Record with the balanced light. (Natural light)
◆ Indoor( ): Record with the balanced light. (Glow lamp, light in the studio or video light)
Focus
AF
EIS
On
Photo Settings
White Balance Auto
5
Photo Settings
Size
800 x 600
5.
Move the [ ▲ /▼ ] switch to select desired setting and press the [OK] button.
Size
800 x 600
Light
Auto
6.
Press the [Menu] button to finish setting.
Light
Auto
Focus
AF
Focus
AF
EIS
Off
◆ The icon of selected function is displayed.
◆ If you select <Auto>, no icon is displayed.
EIS
On
White Balance Auto
6.
800
Back
Size
White Balance Auto
5.
Photo Capture
Capture
◆ The Photo Capture screen appears.
3.
4
3
Move [Mode Selector] down to turn on the CAM and move it down again.
Photo Capture
White Balance Hold
6
800
Photo Capture
800
◆ The icon of selected function is displayed.
Notes
Notes
✤
✤
64
If you select <Back> in the menu, the previous menu appears.
Press and hold the [Menu] button in Photo View, you can move to <File Options> directly.
✤
✤
If you select <Back> in the menu, the previous menu appears.
Press and hold the [Menu] button in Photo View, you can move to <File Options> directly.
Capturing...
BLC
65
VP-M102 UK_2-Photo 2004.12.20 11:37 AM Page 66
ENGLISH
ENGLISH
Photo Mode : Setting Various Functions
Photo Mode : Setting Various Functions
Setting the Program AE (Programmed Auto Exposure)
Setting the BLC (Backlight Compensation)
It allows you to adjust the aperture setting to suit different conditions.
1.
Move [Mode Selector] down to turn on the CAM and move it down again.
◆ The Mode Selection screen appears.
2.
3
Move the [ ▲ /▼ ] switch to select Photo mode and press the [OK] button.
5.
6.
1.
3
Back
2.
Press the [Menu] button and move the [ ▲ /▼ ] switch.
Press the [OK] button after selecting <Settings>.
Photo Capture
Move [Mode Selector] down to turn on the CAM and move it down again.
View
Settings
Back
Move the [ ▲ /▼ ] switch to select Photo mode and press the [OK] button.
◆ The Photo Capture screen appears.
3.
Photo Settings
Move the [ ▲ /▼ ] switch to select <Program AE> and press the [OK] button.
Light
Auto
◆ Auto: Auto balance between the subject and background to get the best result.
Focus
AF
The shutter speed automatically varies from 1/60 to 1/250 per second
depending on the scene.
◆ Sports( ): For fast-moving people or objects. It is suitable for sports events or when
you are outside in the car.
◆ Spotlight( ): Compensates for a subject that appears too bright under strong direct
5
light such as spotlight. It is suitable for concert and school performance.
◆ Sand/Snow( ): Use when the light is very strong such as on the beach or in the snow.
◆ HS Shutter( ): Allows fast-moving images to be captured one frame at a time.
EIS
On
Move the [ ▲ /▼ ] switch to select desired setting and press the [OK] button.
White Balance Auto
4.
White Balance Auto
Program AE
Auto
5.
Photo Settings
Press the [Menu] button and move the [ ▲ /▼ ] switch.
Press the [OK] button after selecting <Settings>.
4
Photo Settings
Focus
AF
EIS
On
Move the [ ▲ /▼ ] switch to select <BLC> and press the [OK] button.
White Balance Auto
◆ On(
): Set the BLC function.
◆ Off: Cancel the BLC function.
Program AE
Auto
BLC
Off
Move the [ ▲ /▼ ] switch to select desired setting and press the [OK] button.
5
Photo Settings
Light
Auto
Focus
AF
Focus
AF
EIS
On
EIS
On
White Balance Auto
Program AE
Program AE
BLC
Sand/Snow
6
Photo Capture
800
6.
Press the [Menu] button to finish setting.
◆<
6
Photo Capture
66
If you select <Back> in the menu, the previous menu appears.
Press and hold the [Menu] button in Photo View, you can move to <File Options> directly.
800
> is displayed.
Capturing...
Notes
✤
Auto
On
Press the [Menu] button to finish setting.
◆ The icon of selected function is displayed.
◆ If you select <Auto>, any icon is not displayed.
✤
800
Capture
◆ The Mode Selection screen appears.
Settings
4
4.
800
View
◆ The Photo Capture screen appears.
3.
Photo Capture
Capture
The Backlight Compensation function helps to make the subject brighter when the subject is
in front of a window or the subject is too dark to distinguish. You can use this function when
using the CAM in the bright backgrounds including snow scenes.
Capturing...
BLC
Notes
✤
✤
BLC
If you select <Back> in the menu, the previous menu appears.
Press and hold the [Menu] button in Photo View, you can move to <File Options> directly.
67
VP-M102 UK_2-Photo 2004.12.20 11:37 AM Page 68
ENGLISH
MEMO
3
MP3 / Voice Recorder Mode /
Using File Browser
MP3 Mode
Storing Music in the CAM . . . . . . . . . . . . . . . . . . . . . . 70
Copying Music files to the CAM . . . . . . . . . . . . . . . . . . . . 70
Playing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Playing Music files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Selecting Play Options . . . . . . . . . . . . . . . . . . . . . . . . 72
Setting Repeat Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Selecting File Options . . . . . . . . . . . . . . . . . . . . . . . . . 73
Deleting Music files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Locking Music files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Copying Music files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Voice Recorder Mode
Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Recording Voice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Playing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Playing Voice files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Selecting File Options . . . . . . . . . . . . . . . . . . . . . . . . . 78
Deleting Voice files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Locking Voice files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Copying Voice files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
Using File Browser
Deleting Files or Folders . . . . . . . . . . . . . . . . . . . . . . . . .
Locking Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Copying Files or Folders . . . . . . . . . . . . . . . . . . . . . . . . .
Viewing File Information . . . . . . . . . . . . . . . . . . . . . . . . . .
68
81
82
83
84
69
VP-M102 UK_3-M/V/F 2004.12.20 11:37 AM Page 70
ENGLISH
MP3 Mode : Storing Music in the CAM
Copying Music files to the CAM
ENGLISH
MP3 Mode : Playing
Playing Music files
You can transfer music files from your PC to the internal memory, Memory Stick or Memory Stick Pro. For copying music files,
the CAM must be connected to your PC with the USB cable. You don’t have to connect the CAM to your PC when you transfer
music files to the Memory Stick directly.
You can hear the music copied from your PC directly or with the Memory Stick.
1.
2.
Connect the CAM to a PC with the USB cable.
◆ Your computer recognises this device and the symbol for
removable drive will appear in ‘My Computer’.
2.
3.
4.
Double-click the new removable drive to open.
Select the MP3 folder and double-click to enter.
Copy the MP3 file you want from PC to the CAM.
1.
Connect the earphones to the CAM.
◆ You can also hear the music from the Built-in speaker without the earphones.
3
Mode Selection
Video
Move [Mode Selector] down to turn on the CAM and move it down again.
Photo
◆ The Mode Selection screen appears.
MP3
3.
Move the [ ▲ /▼ ] switch to select MP3 mode and press the [OK] button.
Voice Recorder
4.
Move the [ ▲ /▼ ] switch to find the music you want to hear and
press the [OK] button.
File Browser
4
◆ The selected music is played.
◆ Refer to the folder structure on page 29 for copying
MP3 Play
1 hey jude.mp3
2 I believe I can fly.mp3
MP3 files.
3 black or white.mp3
4 Let it be.mp3
5 What a wonderful world.mp3
Disconnecting USB Connection
After completing the data transfer, you must disconnect the cable in the following way.
1. Select the removable disk icon and click the right mouse button to select ‘Safely Remove Hardware’.
2. Select ‘Stop’ and disconnect the USB cable when the pop-up screen disappears.
5.
◆ Each time you press the [OK] button, play or pause is selected repeatedly.
✤
✤
The use of [ ▲ /▼ ] switch
✤
The way of transferring, playing with the Memory Stick is same as that of internal memory.
Refer to page 113 for installing USB Driver for Windows98SE.
MP3 Play
Press the [▲ ] switch
First 2 seconds after start playing - the previous file appears.
2 seconds after start playing - the first scene of the file appears.
Press the [▼ ] switch
The next file appears.
4.4 Kbytes
Stereo 44.1KHz 128Kbps
03:19 / 04:32
Notes
✤
✤
70
5
2. I belive i can fly.mp3
✤
Notes
Press the [OK] button again to stop hearing music.
‘----’ is displayed depending on the title of MP3 file.
If you lock the MP3 hold switch, you cannot use the button except the Power switch and volume +/- button.
The MP3 hold switch operates only in the MP3 mode.
71
VP-M102 UK_3-M/V/F 2004.12.20 11:37 AM Page 72
ENGLISH
MP3 Mode : Selecting Play Options
Deleting Music files
Setting Repeat Play
You can delete the music file you want.
1.
You can play the only one or all music repeatedly.
1.
Connect the earphones to the CAM.
◆ You can also hear the music from the Built-in speaker without the earphones.
2.
3.
3
Move [Mode Selector] down to turn on the CAM and move it down again.
◆ The Mode Selection screen appears.
MP3 Play
2.
1 hey jude.mp3
Move [Mode Selector] down to turn on the CAM and move it down again.
2 I believe I can fly.mp3
◆ The Mode Selection screen appears.
3 black or white.mp3
Move the [ ▲ /▼ ] switch to select MP3 mode and press the [OK] button.
4 Let it be.mp3
3.
Move the [ ▲ /▼ ] switch to select <Play Options> and press the [OK] button. 4
2
Move the [ ▲ /▼ ] switch to select MP3 mode and press the [OK] button.
2 I believe I can fly.mp3
3 black or white.mp3
Move the [ ▲ /▼ ] switch to select <File Options> and press the [OK] button.
4 Let it be.mp3
5 What a wonderful world.mp3
3
2 I belive
File
Options
i can fly.mp3
3 black or white.mp3
Back
2 I belive
File
Options
i can fly.mp3
4 Let it be.mp3
3 black or white.mp3
Back
5 What a wonderful world.mp3
4 Let it be.mp3
5 What a wonderful world.mp3
Move the [ ▲ /▼ ] switch to select <Repeat> and press the [OK] button.
5
Move the [ ▲ /▼ ] switch to select desired setting and press the [OK] button.
Press the [Menu] button to finish setting.
4.
✤
72
4
MP3 Play
Delete
Delete
1
hey jude.mp3
Repeat
All
Copy
To
Copy
Toor white.mp3
3
black
Back
5.
6
MP3 Play
Repeat
Back
Back
4
Let it be.mp3
Move the [ ▲ /▼ ] switch to select the followings and press the [OK] button.
◆ Selected: The selected music file is deleted.
◆ All: All music files are deleted.
◆ Cancel: Cancel deleting music files.
5 What a wonderful world.mp3
5
MP3 Play
2.Deleting
I belivefile(s)...
i can fly.mp3
5.6 Mbytes
One
Back
Note
Move the [ ▲ /▼ ] switch to select <Delete> and press the [OK] button.
MP3 Play
Lock
Lock
2
I belive i can fly.mp3
◆ All: All files are repeated.
◆ Off: Cancel the Repeat Play function.
◆ One: One file is repeated.
6.
7.
MP3 Play
1 heyOptions
Play
jude.mp3
MP3 Play
1 heyOptions
Play
jude.mp3
5.
MP3 Play
1 hey jude.mp3
◆ Press the [Menu] button when the music list appears.
5 What a wonderful world.mp3
◆ Press the [Menu] button when the music list appears.
4.
ENGLISH
MP3 Mode : Selecting File Options
Note
✤
If you select <Back> in the menu, the previous menu appears.
Stereo 44.1KHz Selected
128Kbps
All
Cancel
03:19 / 04:32
If you select <Back> in the menu, the previous menu appears.
73
VP-M102 UK_3-M/V/F 2004.12.20 11:37 AM Page 74
ENGLISH
ENGLISH
MP3 Mode : Selecting File Options
MP3 Mode : Selecting File Options
Locking Music files
Copying Music files
You can lock the important music file not to be deleted.
1.
Move [Mode Selector] down to turn on the CAM and move it down again.
◆ The Mode Selection screen appears.
2.
3.
You can copy the music file to the internal or external memory.
2
2 I believe I can fly.mp3
◆ Press the [Menu] button when the music list appears.
3 black or white.mp3
Move the [ ▲ /▼ ] switch to select <File Options> and press the [OK] button.
4 Let it be.mp3
Move the [ ▲ /▼ ] switch to select <Lock> and press the [OK] button.
1.
5 What a wonderful world.mp3
4
Move [Mode Selector] down to turn on the CAM and move it down again.
◆ The Mode Selection screen appears.
1 hey jude.mp3
Move the [ ▲ /▼ ] switch to select MP3 mode and press the [OK] button.
3
4.
MP3 Play
2.
3.
2
1 hey jude.mp3
Move the [ ▲ /▼ ] switch to select MP3 mode and press the [OK] button.
2 I believe I can fly.mp3
◆ Press the [Menu] button when the music list appears.
3 black or white.mp3
Move the [ ▲ /▼ ] switch to select <File Options> and press the [OK] button.
4 Let it be.mp3
MP3 Play
5 What a wonderful world.mp3
3
1 heyOptions
Play
jude.mp3
2 I belive
File
Options
i can fly.mp3
2 I belive
File
Options
i can fly.mp3
3 black or white.mp3
Back
3 black or white.mp3
Back
4 Let it be.mp3
4 Let it be.mp3
5 What a wonderful world.mp3
5 What a wonderful world.mp3
MP3 Play
4.
Move the [ ▲ /▼ ] switch to select <Copy To> and press the [OK] button.
◆ If you selected the Storage type ‘External’, the file is copied to ‘Internal’.
4
Lock
Lock
2
I belive i can fly.mp3
◆ Selected: The selected music file is locked.
◆ All: All music files are locked.
◆ Cancel: Cancel locking music files.
Copy
To
Copy
Toor white.mp3
3
black
Copy
To
Copy
Toor white.mp3
3
black
Back
Back
4
Let it be.mp3
5.
5 What a wonderful world.mp3
5
◆ Selected: Copy the selected music file.
◆ All: Copy all music files.
◆ Cancel: Cancel copying music files.
MP3 Play
✤
✤
74
If you select <Back> in the menu, the previous menu appears.
The <
> icon is displayed on the locked file.
Stereo 44.1KHz Selected
128Kbps
All
Cancel
03:19 / 04:32
Back
Back
4
Let it be.mp3
Move the [ ▲ /▼ ] switch to select the followings and press the [OK] button.
2.Choose
I belivethe
i can
fly.mp3
file(s)
you would
to Mbytes
lock.
5.6
Notes
MP3 Play
Delete
Delete
1
hey jude.mp3
Lock
Lock
2
I belive i can fly.mp3
Move the [ ▲ /▼ ] switch to select the followings and press the [OK] button.
MP3 Play
1 heyOptions
Play
jude.mp3
Delete
Delete
1
hey jude.mp3
5.
MP3 Play
5 What a wonderful world.mp3
5
MP3 Play
2.Choose
I belivethe
i can
fly.mp3
file(s)
to copy
to Mbytes
internal memory?
5.6
Note
✤
If you set Hold function with the MP3 Hold switch, you can’t delete, lock or copy music files.
You can only use Power switch and volume [+]/[ - ] buttons.
Stereo 44.1KHz Selected
128Kbps
All
Cancel
03:19 / 04:32
75
VP-M102 UK_3-M/V/F 2004.12.20 11:37 AM Page 76
ENGLISH
ENGLISH
Voice Recorder Mode : Recording
Voice Recorder Mode : Playing
Recording Voice
Playing Voice files
You can record voice using the built-in microphone in the CAM.
1.
Move [Mode Selector] down to turn on the CAM and move it down again.
◆ The Mode Selection screen appears.
2.
You can hear the voice file connecting earphones.
2
1.
Mode Selection
Video
Move the [ ▲ /▼ ] switch to select Voice Recorder mode and
press the [OK] button.
Move [Mode Selector] down to turn on the CAM and move it down again.
◆ The Mode Selection screen appears.
Photo
2.
Move the [ ▲ /▼ ] switch to select Voice Recorder mode and
press the [OK] button.
3.
Press the [Menu] button when the Voice Record screen appears.
MP3
Voice Record
2
9
Stereo 8KHz 128Kbps
Voice Recorder
File Browser
3.
Press the [Record/Stop] button to record voice.
◆ The elapsed time and <● REC> is displayed. It starts recording.
00:00:16 / 00:24:32
Voice Record
3
3
Record
9 2004/01/01 12:18:12 AM
Play
Stereo 8KHz 128Kbps
Back
Stereo 8KHz 128Kbps
00:00:16 / 00:24:32
4
4.
Press the [Record/Stop] button to stop recording voice.
◆ < ■ STBY > is displayed and it stops recording.
00:00:16 / 00:24:32
REC
4.
5.
6.
Voice Record
9
Stereo 8KHz 128Kbps
Move the [ ▲ /▼ ] switch to select <Play> and press the [OK] button.
Move the [ ▲ /▼ ] switch to select the file you want to play.
Press the [OK] button to play the recorded voice.
4
STBY
STBY
Voice Play
1 2004/01/01
◆ Press the [OK] button to pause playing.
00:00:16 / 00:24:32
STBY
Voice Record
12:22:00 AM
2 2004/01/02
1:23:00 AM
3 2004/01/03
5:39:00 AM
4 2004/01/07
7:13:00 AM
5 2004/01/07
11:54:00 AM
The button and switch you use when playing the recording
Play/Pause [
] button: Play or pause the voice file
Rewind [ ] switch: Rewind the voice file(Press it for 2 seconds)/Move to previous file
Fast Forward [ ] switch: Wind the voice file forward(Press it for 2 seconds)/Move to next file
6
Voice Play
2 01/01/2004 01:23
5.0 Mbytes
Stereo 8KHz 128Kbps
Note
✤
76
Press the [Back] button while recording standby status to view the file list.
00:00:12 / 00:05:12
77
VP-M102 UK_3-M/V/F 2004.12.20 11:37 AM Page 78
ENGLISH
ENGLISH
Voice Recorder Mode : Selecting File Options
Voice Recorder Mode : Selecting File Options
Deleting Voice files
Locking Voice files
You can delete voice files you want.
1.
Move [Mode Selector] down to turn on the CAM and move it down again.
◆ The Mode Selection screen appears.
2.
3.
4.
You can lock the important voice file not to be deleted.
4
Move the [ ▲ /▼ ] switch to select Voice Recorder mode and
press the [OK] button.
Press the [Menu] button when the Voice Record Screen appears.
Move the [ ▲ /▼ ] switch to select <Play> and press the [OK] button.
00:00:16 / 00:24:32
Press the [Menu] button to select <File Options> and press the [OK] button.
◆ You can select <File Options> only in <Play>.
6.
7.
Move the [ ▲ /▼ ] switch to select <Delete> and press the [OK] button.
Move the [ ▲ /▼ ] switch to select the followings and press the [OK] button.
◆ Selected: The selected voice file is deleted.
◆ All: All voice files are deleted.
◆ Cancel: Cancel deleting voice files.
Note
✤
78
6
If you select <Back> in the menu, the previous menu appears.
7
2.
STBY
Voice Play
3.
4.
12:22:00 AM
File
Options
3
01/02/2005
Back
4 2004/01/07
5:39:00 AM
5 2004/01/07
11:54:00 AM
5.
Move the [ ▲ /▼ ] switch to select Voice Recorder mode and
press the [OK] button.
Press the [Menu] button when the Voice Record screen appears.
Move the [ ▲ /▼ ] switch to select <Play> and press the [OK] button.
Play
Stereo 8KHz 128Kbps
Back
00:00:16 / 00:24:32
6.
Voice Play
12:22:00 AM
Copy
To
3
01/02/2005
Back
4 2004/01/07
5:39:00 AM
5 2004/01/07
11:54:00 AM
Press the [Menu] button to select <File Options> and press the [OK] button.
◆ You can select <File Options> only in <Play>.
7:13:00 AM
Move the [ ▲ /▼ ] switch to select <Lock> and press the [OK] button.
6
1:23:00 AM
7:13:00 AM
7.
Voice Play
Record
1
04/07/04file(s)...
12:22 pm
Deleting
Play
2
04/07/05
1:23 am
Selected
5:39
pm
All am
7:3
Cancelpm
11:54
Move the [ ▲ /▼ ] switch to select the followings and press the [OK] button.
◆ Selected: The selected voice file is locked.
◆ All: All voice files are locked.
◆ Cancel: Cancel locking voice files.
✤
✤
Voice Record
Record
1:23:00 AM
Delete
1
01/01/2005
Lock
2
01/01/2005
5 04/07/12
4
5
Record
1
01/01/2005
Play
2
01/01/2005
File
Option
3
04/07/05
Back
4 04/07/09
Move [Mode Selector] down to turn on the CAM and move it down again.
◆ The Mode Selection screen appears.
Play
Stereo 8KHz 128Kbps
Back
5
5.
1.
Voice Record
Record
7
STBY
Voice Play
Record
1
01/01/2005
Play
2
01/01/2005
12:22:00 AM
File
Options
3
01/02/2005
Back
4 2004/01/07
5:39:00 AM
5 2004/01/07
11:54:00 AM
1:23:00 AM
7:13:00 AM
Voice Play
Delete
1
01/01/2005
Lock
2
01/01/2005
12:22:00 AM
Copy
To
3
01/02/2005
Back
4 2004/01/07
5:39:00 AM
5 2004/01/07
11:54:00 AM
1:23:00 AM
7:13:00 AM
Voice Play
Record
1
04/07/04the file(s)
12:22
Choose
youpm
would
Play
to
lock.
2
04/07/05
1:23 am
Notes
File
Option
3
04/07/05
Back
4 04/07/09
If you select <Back> in the menu, the previous menu appears.
The <
> icon is displayed on the locked file.
5 04/07/12
Selected
5:39
pm
All am
7:3
Cancelpm
11:54
79
VP-M102 UK_3-M/V/F 2004.12.20 11:37 AM Page 80
ENGLISH
ENGLISH
Voice Recorder Mode : Selecting File Options
Using File Browser
Copying Voice files
Deleting Files or Folders
You can copy the voice file to the internal or external memory.
1.
Move [Mode Selector] down to turn on the CAM and move it down again.
◆ The Mode Selection screen appears.
2.
3.
4.
You can delete the file(AVI, MP3, JPEG, WAV) or folders you recorded.
4
Move the [ ▲ /▼ ] switch to select Voice Recorder mode and
press the [OK] button.
Press the [Menu] button when the Voice Record screen appears.
Move the [ ▲ /▼ ] switch to select <Play> and press the [OK] button.
00:00:16 / 00:24:32
Press the [Menu] button to select <File Options> and press the [OK] button.
Move the [ ▲ /▼ ] switch to select <Copy To> and press the [OK] button.
◆ If you selected the Storage type ‘External’, the file is copied to ‘Internal’.
7.
Note
✤
80
6
Move the [ ▲ /▼ ] switch to select the followings and press the [OK] button.
◆ Selected: Copy the selected voice file.
◆ All: Copy all voice files.
◆ Cancel: Cancel copying voice files.
If you select <Back> in the menu, the previous menu appears.
2.
2
Mode Selection
Video
Move the [ ▲ /▼ ] switch to select File Browser and press the [OK] button.
Photo
MP3
Voice Recorder
◆ You can select <File Options> only in <Play>.
6.
Move the [Mode Selector] down to turn on the CAM and press it again.
◆ The Mode Selection screen appears.
Play
Stereo 8KHz 128Kbps
Back
5
5.
1.
Voice Record
Record
7
File Browser
STBY
3.
Voice Play
Record
1
01/01/2005
Play
2
01/01/2005
12:22:00 AM
File
Options
3
01/02/2005
Back
4 2004/01/07
5:39:00 AM
5 2004/01/07
11:54:00 AM
◆ Press the [Menu] button if you want to delete the selected folder.
◆ Perform these steps repeatedly until the file you want to delete appears.
1:23:00 AM
4.
Voice Play
12:22:00 AM
Copy
To
3
01/02/2005
Back
4 2004/01/07
5:39:00 AM
5 2004/01/07
11:54:00 AM
DCIM
MISC
MSAMSUNG
Press the [Menu] button and move the [ ▲ /▼ ] switch.
Press the [OK] button after selecting <Delete>.
4
7:13:00 AM
5.
Delete
1
04/07/04the file(s)
12:22
pm
Choose
to copy
Lock
to
memory stick?
2
04/07/05
1:23 am
Selected
5:39
pm
All am
7:3
Cancelpm
11:54
Note
✤
Copy
To
SWAV0002.WAV
File Info
SWAV0003.WAV
Back
SWAV0004.WAV
Move the [ ▲ /▼ ] button to select the setting you want.
Press the [OK] button.
◆ Selected: The selected file is deleted.
◆ All: All files are deleted.
◆ Cancel: Cancel deleting files.
/ . . . / 100SSWAV
Delete
Up One Level
Lock
SWAV0001.WAV
1:23:00 AM
Voice Play
5 04/07/12
/
7:13:00 AM
Delete
1
01/01/2005
Lock
2
01/01/2005
Copy
To
3
04/07/05
Back
4 04/07/09
Move the [ ▲ /▼ ] switch to select the folder to find the file you want to delete. 3
Press the [OK] button.
6
/ . . . / 100SSWAV
Delete
Up One file(s)...
Level
Delecting
Lock
SWAV0001.WAV
Copy
To
Selected
SWAV0002.WAV
File Info
All
SWAV0003.WAV
Back
Cancel
SWAV0004.WAV
If you select <Back> in the menu, the previous menu appears.
81
VP-M102 UK_3-M/V/F 2004.12.20 11:37 AM Page 82
ENGLISH
ENGLISH
Using File Browser
Using File Browser
Locking Files
Copying Files or Folders
You can lock the important video files or photo files not to be deleted.
1.
Move the [Mode Selector] down to turn on the CAM and press it again.
◆ The Mode Selection screen appears.
2.
3.
You can copy the file or folder to the internal or external memory.
2
Mode Selection
Photo
3
2.
5.
Press the [Menu] button and move the [ ▲ /▼ ] switch.
Press the [OK] button after selecting <Lock>.
Voice Recorder
File Browser
3.
/
Notes
✤
✤
82
If you select <Back> in the menu, the previous menu appears.
You can’t lock folders.
The <
> icon is displayed on the locked file.
4.
Delete
Up One
Choose
theLevel
file(s) you would
Lock
toSWAV0001.WAV
lock.
Note
✤
If you select <Back> in the menu, the previous menu appears.
DCIM
MSAMSUNG
4
/ . . . / 100SSWAV
Delete
Up One Level
Lock
SWAV0001.WAV
Copy
To
SWAV0002.WAV
File Info
SWAV0003.WAV
Back
SWAV0004.WAV
Move the [ ▲ /▼ ] button to select the followings. Press the [OK] button.
◆ Selected: Copy the selected file.
◆ All: Copy all files.
◆ Cancel: Cancel copying files.
/ . . . / 100SSWAV
Copy
To
Selected
SWAV0002.WAV
File Info
All
SWAV0003.WAV
Back
Cancel
SWAV0004.WAV
Press the [Menu] button and move the [ ▲ /▼ ] switch.
Press the [OK] button after selecting <Copy To>.
/
MISC
◆ If you selected the Storage type ‘External’, the file is copied to ‘Internal’.
5.
6
✤
/ . . . / 100SSWAV
Move the [ ▲ /▼ ] switch to select the folder to find the file you want to copy. 3
Press the [OK] button.
◆ Press the [Menu] button if you want to copy the selected folder.
◆ Perform these steps repeatedly until the file you want to copy appears.
Copy
To
SWAV0002.WAV
File Info
SWAV0003.WAV
Back
SWAV0004.WAV
◆ Selected: The selected file is locked.
◆ All: All files are locked.
◆ Cancel: Cancel locking files.
Photo
File Browser
Delete
Up One Level
Lock
SWAV0001.WAV
Move the [ ▲ /▼ ] button to select the followings. Press the [OK] button.
Video
Move the [ ▲ /▼ ] switch to select File Browser and press the [OK] button.
MP3
MISC
4
Mode Selection
Voice Recorder
MSAMSUNG
4.
2
MP3
DCIM
◆ Perform these steps repeatedly until the file you want to lock appears.
Move the [Mode Selector] down to turn on the CAM and press it again.
◆ The Mode Selection screen appears.
Video
Move the [ ▲ /▼ ] switch to select File Browser and press the [OK] button.
Move the [ ▲ /▼ ] switch to select the file you want to lock.
Press the [OK] button.
1.
6
/ . . . / 100SSWAV
Delete
Up One
Choose
theLevel
file(s) to copy
Lock
toSWAV0001.WAV
memory stick?
Copy
To
Selected
SWAV0002.WAV
File Info
All
SWAV0003.WAV
Back
Cancel
SWAV0004.WAV
83
VP-M102 UK_3-M/V/F 2004.12.20 11:37 AM Page 84
ENGLISH
Using File Browser
Viewing File Information
You can see the file name, format, size and date.
1.
Move the [Mode Selector] down to turn on the CAM and press it again.
◆ The Mode Selection screen appears.
2.
2
Mode Selection
Move the [ ▲ /▼ ] switch to select File Browser and press the [OK] button.
Adjusting the LCD Monitor . . . . . . . . . . . . . . . . . . . . . 85
Photo
Adjusting the LCD Brightness . . . . . . . . . . . . . . . . . . . . . 86
Adjusting the LCD Colour . . . . . . . . . . . . . . . . . . . . . . . . 87
Voice Recorder
File Browser
Move the [ ▲ /▼ ] switch to select the file you want to see its file information. 3
Press the [OK] button.
◆ Perform these steps repeatedly until the file you want to see its file information appears.
/
DCIM
MISC
MSAMSUNG
4.
5.
Press the [Menu] button and move the [ ▲ /▼ ] switch.
Press the [OK] button after selecting <File Info>.
4
/ . . . / 100SSWAV
◆ The screen with file name, format, size and date appears.
Delete
Up One Level
Lock
SWAV0001.WAV
Press the [OK] button to finish viewing file information.
Copy
To
SWAV0002.WAV
File Info
SWAV0003.WAV
Back
SWAV0004.WAV
◆ If you select <Close> in the screen, the screen disappears.
5
/ . . . / 100SSWAV
Delete
SWAV0001.WAV
Up One Level
Size
6482524 bytes
Lock
SWAV0001.WAV
Date
2004/01/01
Copy
To 08:30:00 PM
SWAV0002.WAV
Locked
File
Info No
SWAV0003.WAV
Back
Close
SWAV0004.WAV
84
Setting the CAM
Video
MP3
3.
4
Adjusting Date/Time . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
Setting Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting Date . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting Date Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting Time Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
88
89
90
91
Setting the System . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
Setting the Auto Shut off . . . . . . . . . . . . . . . . . . . . . . . . .
Setting the Demo Function . . . . . . . . . . . . . . . . . . . . . . . .
Setting Start-up Mode . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting the File No. Function . . . . . . . . . . . . . . . . . . . . . .
Setting the Beep Sound . . . . . . . . . . . . . . . . . . . . . . . . . .
Viewing Version Information . . . . . . . . . . . . . . . . . . . . . . .
92
93
94
95
96
97
Setting Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
Selecting the Storage Type . . . . . . . . . . . . . . . . . . . . . . . 98
Formatting the Memory . . . . . . . . . . . . . . . . . . . . . . . . . . 99
Viewing Memory Space . . . . . . . . . . . . . . . . . . . . . . . . . . 100
Using USB Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
Storing Files to the External Memory . . . . . . . . . . . . . . . . 101
System Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
Using PC Cam . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
Connecting the CAM to a Printer . . . . . . . . . . . . . . . . . . . 104
85
VP-M102 UK_4-Setting 2004.12.20 11:38 AM Page 86
ENGLISH
ENGLISH
Setting the CAM : Adjusting the LCD Monitor
Setting the CAM : Adjusting the LCD Monitor
Adjusting the LCD Brightness
Adjusting the LCD Colour
You can adjust the brightness of the LCD monitor to compensate for ambient lighting conditions.
1.
Move [Mode Selector] down to turn on the CAM and move it down again.
◆ The Mode Selection screen appears.
2.
You can adjust the colour of the LCD monitor depending on the situation.
2
1.
Mode Selection
MP3
Move the [ ▲ /▼ ] switch to select System Settings and press the [OK] button.
Move [Mode Selector] down to turn on the CAM and move it down again.
◆ The Mode Selection screen appears.
Voice Recorder
2.
2
MP3
Move the [ ▲ /▼ ] switch to select System Settings and press the [OK] button.
Voice Recorder
File Browser
File Browser
System Settings
System Settings
Back
3.
4.
Move the [ ▲ /▼ ] switch to select <Display> and press the [OK] button.
Move the [ ▲ /▼ ] switch to select <LCD Brightness> and
press the [OK] button.
◆ You
3
4
Back
System Settings
3.
Move the [ ▲ /▼ ] switch to select <Display> and press the [OK] button.
3
Display
Date/Time
Date/Time
System
System
Memory
Memory
Back
Back
Settings: Display
4.
LCD Colour
Move the [ ▲ /▼ ] switch to select <LCD Colour> and press the [OK] button.
◆ You
can adjust the LCD Colour from 0% to 100%.
4
Move the [ ▲ /▼ ] switch to select the brightness you want.
6.
Press the [Back] button to finish setting.
5
LCD Colour
50 %
Notes
✤
✤
86
If you select <Back> in the menu, the previous menu appears.
A brighter LCD Monitor setting consumes more battery power.
50 %
Back
Settings: Display
5.
Move the [ ▲ /▼ ] switch to select the colour you want.
LCD Brightness 30 %
6.
Press the [Back] button to finish setting.
LCD Colour
Settings: Display
LCD Brightness 20 %
Back
5.
System Settings
Display
LCD Brightness 20 %
can adjust the LCD Brightness from 0% to 100%.
Mode Selection
5
Settings: Display
LCD Brightness 20 %
LCD Colour
50 %
60 %
Back
Back
Note
✤
If you select <Back> in the menu, the previous menu appears.
87
VP-M102 UK_4-Setting 2004.12.20 11:38 AM Page 88
ENGLISH
ENGLISH
Setting the CAM : Adjusting Date/Time
Setting the CAM : Adjusting Date/Time
Setting Time
Setting Date
The built-in clock creates the time stamp. You can adjust the time you use.
1.
Move [Mode Selector] down to turn on the CAM and move it down again.
◆ The Mode Selection screen appears.
2.
The built-in calendar creates the date stamp. You can adjust the date you use.
2
1.
Mode Selection
MP3
Move the [ ▲ /▼ ] switch to select System Settings and press the [OK] button.
Move [Mode Selector] down to turn on the CAM and move it down again.
◆ The Mode Selection screen appears.
Voice Recorder
2.
2
MP3
Move the [ ▲ /▼ ] switch to select System Settings and press the [OK] button.
Voice Recorder
File Browser
File Browser
System Settings
System Settings
Back
3.
4.
Move the [ ▲ /▼ ] switch to select <Date/Time> and press the [OK] button.
Move the [ ▲ /▼ ] switch to select <Set Time> and press the [OK] button.
3
4
Back
System Settings
3.
Move the [ ▲ /▼ ] switch to select <Date/Time> and press the [OK] button.
3
Move the [ ▲ /▼ ] switch to set time and press the [OK] button.
◆ Move the [ ▲ /▼ ] switch to change the setting and press the [OK] button
to confirm selection and move to the next setting.
6.
Press the [Back] button to finish setting.
Note
✤
88
If you select <Back> in the menu, the previous menu appears.
5
System Settings
Display
Display
Date/Time
Date/Time
System
System
Memory
Memory
Back
Back
Settings: Date/Time
4.
Move the [ ▲ /▼ ] switch to select <Set Date> and press the [OK] button.
4
Settings: Date/Time
Set Time
08:30:01 AM
Set Time
08:30:01 AM
Set Date
2004/01/01
Set Date
2004/01/01
Date Format
YY/MM/DD
Date Format
YY/MM/DD
Time Format
12 Hour
Time Format
12 Hour
Back
5.
Mode Selection
Back
Settings: Date/Time
Set Time
6 : 39
Set Date
5.
to confirm selection and move to the next setting.
PM
DD/MM/YY
Date Format
Press Up/Down to change and
Time Format 24 Hour
OK to confirm selection
Back
Move the [ ▲ /▼ ] switch to set date and press the [OK] button.
◆ Move the [ ▲ /▼ ] switch to change the setting and press the [OK] button
6.
Press the [Back] button to finish setting.
Note
✤
5
Settings: Date/Time
Set Time
2004 / 1 / 1
Set Date
DD/MM/YY
Date Format
Press Up/Down to change and
Time Format 24 Hour
OK to confirm selection
Back
If you select <Back> in the menu, the previous menu appears.
89
VP-M102 UK_4-Setting 2004.12.20 11:38 AM Page 90
ENGLISH
ENGLISH
Setting the CAM : Adjusting Date/Time
Setting the CAM : Adjusting Date/Time
Setting Date Format
Setting Time Format
You can select the date format to display.
1.
Move [Mode Selector] down to turn on the CAM and move it down again.
◆ The Mode Selection screen appears.
2.
You can select the time format to display.
2
1.
Mode Selection
MP3
Move the [ ▲ /▼ ] switch to select System Settings and press the [OK] button.
Move [Mode Selector] down to turn on the CAM and move it down again.
◆ The Mode Selection screen appears.
Voice Recorder
2.
2
MP3
Move the [ ▲ /▼ ] switch to select System Settings and press the [OK] button.
Voice Recorder
File Browser
File Browser
System Settings
System Settings
Back
3.
4.
5.
Move the [ ▲ /▼ ] switch to select <Date/Time> and press the [OK] button.
Move the [ ▲ /▼ ] switch to select <Date Format> and press the [OK] button.
The date is displayed in order as Year/Month/Date.
The date is displayed in order as Date/Month/Year.
The date is displayed in order as Month/Date/Year.
Press the [Back] button to finish setting.
Note
✤
90
4
Move the [ ▲ /▼ ] switch to select desired format and press the [OK] button.
◆ YY/MM/DD:
◆ DD/MM/YY:
◆ MM/DD/YY:
6.
3
If you select <Back> in the menu, the previous menu appears.
Back
System Settings
3.
Move the [ ▲ /▼ ] switch to select <Date/Time> and press the [OK] button.
3
System Settings
Display
Display
Date/Time
Date/Time
System
System
Memory
Memory
Back
Back
Settings: Date/Time
4.
Move the [ ▲ /▼ ] switch to select <Time Format> and press the [OK] button.
4
Settings: Date/Time
Set Time
08:30:01 AM
Set Time
08:30:01 AM
Set Date
2004/01/01
Set Date
2004/01/01
Date Format
YY/MM/DD
Date Format
DD/MM/YY
Time Format
12 Hour
Time Format
12 Hour
Back
Back
5.
5
Mode Selection
Settings: Date/Time
Set Time
08:30:01 AM
Set Date
2004/01/01
Date Format
DD/MM/YY
Time Format
12 Hour
Move the [ ▲ /▼ ] switch to select desired format and press the [OK] button.
◆ 12
◆ 24
6.
Hour: The time is displayed as the unit of 12 hours.
Hour: The time is displayed as the unit of 24 hours.
Press the [Back] button to finish setting.
Note
Back
✤
5
Settings: Date/Time
Set Time
08:30:01 AM
Set Date
2004/01/01
Date Format
DD/MM/YY
Time Format
24 Hour
Back
If you select <Back> in the menu, the previous menu appears.
91
VP-M102 UK_4-Setting 2004.12.20 11:38 AM Page 92
ENGLISH
ENGLISH
Setting the CAM : Setting the System
Setting the CAM : Setting the System
Setting the Auto Shut off
Setting the Demo Function
To save energy or battery, you can set the Auto Shut off function.
1.
Move [Mode Selector] down to turn on the CAM and move it down again.
◆ The Mode Selection screen appears.
2.
Demo function will allow you to view all the functions that the CAM supports. Demo will run for up to 5 minutes.
2
1.
Mode Selection
MP3
Move the [ ▲ /▼ ] switch to select System Settings and press the [OK] button.
Move [Mode Selector] down to turn on the CAM and move it down again.
◆ The Mode Selection screen appears.
Voice Recorder
2.
2
MP3
Move the [ ▲ /▼ ] switch to select System Settings and press the [OK] button.
Voice Recorder
File Browser
File Browser
System Settings
System Settings
Back
3.
4.
5.
Move the [ ▲ /▼ ] switch to select <System> and press the [OK] button.
Move the [ ▲ /▼ ] switch to select <Auto Shut off> and press the [OK] button. 4
Move the [ ▲ /▼ ] switch to select desired setting and press the [OK] button.
◆ Off: Cancel the Auto
◆ 5 Minutes: the CAM
6.
Shut off function.
turns off after 5 minutes.
Press the [Back] button to finish setting.
Notes
✤
✤
✤
92
3
If the CAM turns off after 5 minutes, you can use the CAM again after turning it on.
If you select <Back> in the menu, the previous menu appears.
The <Auto Shut off> function cannot be operated if you connect the power adapter to the CAM.
It can be only operated when you insert battery pack into the CAM.
5
Mode Selection
Back
System Settings
3.
Move the [ ▲ /▼ ] switch to select <System> and press the [OK] button.
3
System Settings
Display
Display
Date/Time
Date/Time
System
System
Memory
Memory
Back
Back
Settings: System
4.
Move the [ ▲ /▼ ] switch to select <Demo> and press the [OK] button.
4
Settings: System
Auto Shut off
Off
Auto Shut off
Off
Demo
Off
Demo
Off
Start-up
Video Mode
Start-up
Video Mode
File No.
Series
File No.
Series
Beep Sound
On
Beep Sound
On
5.
◆ Off: Cancel the Demo function.
◆ 5 Minutes: Start the Demo function in 5 minutes.
◆ Play Now: Start the Demo function now.
Settings: System
Auto Shut off
5 Minutes
Demo
Off
Start-up
Video Mode
File No.
Series
Beep Sound
On
Move the [ ▲ /▼ ] switch to select desired setting and press the [OK] button.
6.
Press the [Back] button to finish setting.
Note
✤
✤
If you select <Back> in the menu, the previous menu appears.
If you set the Demo function, it operates only in Video Record.
5
Settings: System
Auto Shut off
Off
Demo
5 Minutes
Start-up
Video Mode
File No.
Series
Beep Sound
On
93
VP-M102 UK_4-Setting 2004.12.20 11:38 AM Page 94
ENGLISH
ENGLISH
Setting the CAM : Setting the System
Setting the CAM : Setting the System
Setting Start-up Mode
Setting the File No. Function
You can select the starting mode displayed when you turn the CAM on.
1.
Move [Mode Selector] down to turn on the CAM and move it down again.
◆ The Mode Selection screen appears.
2.
You can set the file numbers so that they reset each time Memory stick is formatted, or so that they count up continuously.
2
1.
Mode Selection
MP3
Move the [ ▲ /▼ ] switch to select System Settings and press the [OK] button.
Move [Mode Selector] down to turn on the CAM and move it down again.
◆ The Mode Selection screen appears.
Voice Recorder
2.
2
MP3
Move the [ ▲ /▼ ] switch to select System Settings and press the [OK] button.
Voice Recorder
File Browser
File Browser
System Settings
3.
Move the [ ▲ /▼ ] switch to select <System> and press the [OK] button.
3
System Settings
3.
Back
Move the [ ▲ /▼ ] switch to select <System> and press the [OK] button.
System Settings
Back
3
Display
4.
System
5.
Move the [ ▲ /▼ ] switch to select <Start-up> and press the [OK] button.
Move the [ ▲ /▼ ] switch to select desired setting and press the [OK] button.
◆ Video Mode: The CAM starts up in the Video Mode.
◆ Previous Mode: The CAM starts up in the mode you
6.
Press the [Back] button to finish setting.
Note
✤
94
If you select <Back> in the menu, the previous menu appears.
used last.
4
5
System Settings
Display
Date/Time
4.
Mode Selection
Date/Time
Move the [ ▲ /▼ ] switch to select <File No.> and press the [OK] button.
System
Memory
Memory
Back
Back
Settings: System
5.
Move the [ ▲ /▼ ] switch to select desired setting and press the [OK] button.
4
Settings: System
Auto Shut off
Off
◆ Series: Numbering is continuous between the Memory Sticks, so that the first file number
Auto Shut off
Off
Demo
Off
Demo
Off
Start-up
Video Mode
Start-up
Video Mode
File No.
Series
File No.
Series
Beep Sound
On
assigned on a new Memory Stick is 1 more than the last file number assigned
on the previous Memory Stick.
◆ Reset: When the Memory Stick is formatted, the file number resets to its default value.
(100-0001)
Beep Sound
On
Settings: System
6.
Auto Shut off
Off
Demo
Off
Start-up
Previous Mode
File No.
Series
✤
Beep Sound
On
✤
Press the [Back] button to finish setting.
Notes
If you select <Back> in the menu, the previous menu appears.
When you set file number to ‘Series’, each file is assigned a different number avoiding
duplication of numbers. It is convenient when you want to manage your files on a PC.
5
Settings: System
Auto Shut off
Off
Demo
Off
Start-up
Video Mode
File No.
Reset
Beep Sound
On
95
VP-M102 UK_4-Setting 2004.12.20 11:38 AM Page 96
ENGLISH
ENGLISH
Setting the CAM : Setting the System
Setting the CAM : Setting the System
Setting the Beep Sound
Viewing Version Information
You can set the sound of the CAM as you want.
1.
Move [Mode Selector] down to turn on the CAM and move it down again.
◆ The Mode Selection screen appears.
2.
You can see the information of the version.
2
1.
Mode Selection
MP3
Move the [ ▲ /▼ ] switch to select System Settings and press the [OK] button.
Move [Mode Selector] down to turn on the CAM and move it down again.
◆ The Mode Selection screen appears.
Voice Recorder
2.
2
MP3
Move the [ ▲ /▼ ] switch to select System Settings and press the [OK] button.
Voice Recorder
File Browser
File Browser
System Settings
System Settings
Back
3.
4.
5.
Move the [ ▲ /▼ ] switch to select <System> and press the [OK] button.
Move the [ ▲ /▼ ] switch to select <Beep Sound> and press the [OK] button.
Press the [Back] button to finish setting.
Note
✤
✤
96
4
Move the [ ▲ /▼ ] switch to select desired sound and press the [OK] button.
◆ On: Turn the effect sound on.
◆ Off: Turn the effect sound off.
6.
3
If you select <Back> in the menu, the previous menu appears.
When the earphones or Video/Audio cable is connected to the CAM,
the beep sound function does not operate.
5
Mode Selection
Back
System Settings
3.
Move the [ ▲ /▼ ] switch to select <System> and press the [OK] button.
3
System Settings
Display
Display
Date/Time
Date/Time
System
System
Memory
Memory
Back
Back
Settings: System
Auto Shut off
Off
Demo
Off
Start-up
4.
Move the [ ▲ /▼ ] switch to select <Version Info> and press the [OK] button.
◆ The version of the CAM is displayed.
4
Settings: System
Demo
Off
Start-up
Video Mode
Previous Mode
File No.
Series
File No.
Series
Beep Sound
On
Beep Sound
On
Version Info
5.
Press the [Back] button to finish viewing version information.
Settings: System
Settings: System
Auto Shut off
Off
Demo
Off
Start-up
Previous Mode
File No.
Series
Beep Sound
Off
Note
✤
Demo
Samsung Elec.Off
Co. LTD
Spider 0.13
Language
English
Sep 07 2004 Tue 18:41:08
Start-up
Modecon 1.02 Previous Mode
SepSound
08 2004 00:32:48
Sys.
High
Version Info
Close
If you select <Back> in the menu, the previous menu appears.
97
VP-M102 UK_4-Setting 2004.12.20 11:38 AM Page 98
ENGLISH
ENGLISH
Setting the CAM : Setting Memory
Setting the CAM : Setting Memory
Selecting the Storage Type
Formatting the Memory
Select the storage type(internal or Memory Stick, Memory Stick Pro) before recording or taking pictures.
You can format the internal memory, Memory Stick or Memory Stick Pro to erase all files.
1.
1.
Move [Mode Selector] down to turn on the CAM and move it down again.
◆ The Mode Selection screen appears.
2.
2
Mode Selection
MP3
Move the [ ▲ /▼ ] switch to select System Settings and press the [OK] button.
Move [Mode Selector] down to turn on the CAM and move it down again.
◆ The Mode Selection screen appears.
Voice Recorder
File Browser
System Settings
2.
3.
3
Move the [ ▲ /▼ ] switch to select System Settings and press the [OK] button.
Move the [ ▲ /▼ ] switch to select <Memory> and press the [OK] button.
Date/Time
System
Memory
Back
Back
3.
Move the [ ▲ /▼ ] switch to select <Memory> and press the [OK] button.
◆ If
you didn’t insert Memory Stick, you cannot select ‘External’.
3
System Settings
Display
System Settings
4.
Move the [ ▲ /▼ ] switch to select <Format> and press the [OK] button.
◆ If
Display
you didn’t insert Memory Stick, you cannot select ‘External’.
4
Settings: Memory
Storage Type
Internal
Date/Time
Format
Internal
System
Memory Space 000MB/000MB
Memory
Back
Back
4.
5.
Move the [ ▲ /▼ ] switch to select <Storage Type> and press the [OK] button. 4
Move the [ ▲ /▼ ] switch to select desired setting and press the [OK] button.
◆ Internal: The video, photo, mp3 file or voice file is stored in internal memory.
◆ External: The video, photo, mp3 file or voice file is stored in external memory
98
Internal
Move the [ ▲ /▼ ] switch to select desired setting and press the [OK] button.
◆ Internal:
Format the internal memory. If you select ‘Internal’, the message is
displayed to confirm.
◆ External: Format the external memory. If you select ‘External’, the message is
displayed to confirm.
5
Settings: Memory
Storage Type
Internal
Format
External
Memory Space 000MB/000MB
Back
Press the [Back] button to finish setting.
Notes
✤
✤
Format
5.
Back
5
✤
Internal
Memory Space 000MB/000MB
(Memory stick or Memory stick pro).
6.
Settings: Memory
Storage Type
If you select <Back> in the menu, the previous menu appears.
‘Internal’ is selected by default.
If you insert the Memory Stick or Memory Stick Pro, the memory type selection screen appears automatically.
Settings: Memory
Storage Type
External
Format
Internal
6.
Press the [OK] button to format.
◆ Select
7.
<Cancel> to cancel formatting.
Press the [Back] button to finish setting.
Memory Space 000MB/000MB
Back
Note
✤
6
Settings: Memory
Internal
Storage
Are youType
sure you
want to
format the external
memory,
Format
External
all files will be erased?
Back
OK
Cancel
If you select <Back> in the menu, the previous menu appears.
99
VP-M102 UK_4-Setting 2004.12.20 11:38 AM Page 100
ENGLISH
ENGLISH
Setting the CAM : Setting Memory
Setting the CAM : Using USB Mode
Viewing Memory Space
Storing Files to the External Memory
You can view usable memory and total memory space of the CAM.
1.
Move [Mode Selector] down to turn on the CAM and move it down again.
◆ The Mode Selection screen appears.
2.
3.
2
Mode Selection
MP3
Move the [ ▲ /▼ ] switch to select System Settings and press the [OK] button.
Move the [ ▲ /▼ ] switch to select <Memory> and press the [OK] button.
1.
Connect the CAM to the PC with the USB cable.
2.
Move [Mode Selector] down to turn on the CAM.
Voice Recorder
File Browser
System Settings
Back
4.
Move the [▲ /▼ ] switch to select <Memory Space>.
3
System Settings
Display
Date/Time
System
Memory
◆ USB
Back
5.
Press the [Back] button to finish setting.
4
Settings: Memory
Storage Type
Internal
Format
External
3.
menu screen appears automatically.
Move the [ ▲ /▼ ] switch to select <USB 2.0 MassStorage> or
<USB 1.1 MassStorage> and press the [OK] button.
◆ Your
PC recognises the USB device automatically. You may install the USB Driver manually
on Windows 98SE operating system.
USB Mode
USB 2.0 MassStorage
USB 1.1 MassStorage
PC-Cam
Back
PictBridge
Memory Space 000MB/000MB
Back
4.
Disconnect the USB cable if you finish storing.
Notes
✤
✤
Note
✤
100
If you select <Back> in the menu, the previous menu appears.
✤
✤
✤
Select <USB 1.1 MassStorage> when <USB 2.0 MassStorage> does not work depending on your PC environment.
If you disconnect the USB cable from the PC or the CAM during the data transfer, the data transfer will stop and
the data may be damaged.
If you connect the USB cable to a PC using a USB HUB or with other device at the same time, it might cause conflict
and may not work properly. If this occurs, remove all other devices and try the connection again.
Install the Windows 98SE Driver on Windows 98SE operating system using supplied CD. Refer to page 113 for further details.
It takes about 30 minutes if you download or upload the file of 1GB by connecting the USB cable.
101
VP-M102 UK_4-Setting 2004.12.20 11:38 AM Page 102
ENGLISH
ENGLISH
Setting the CAM : Using USB Mode
Setting the CAM : Using USB Mode
USB Speed depending on the System
Using PC Cam
Hi Speed USB is not guaranteed except for Microsoft(Windows) or Apple(Mac OS X) or supplied Driver.
✤
✤
Windows 98SE/ME: Full Speed USB
Windows 2000: Over Service Pack 4 - Hi Speed USB
✤
✤
You can use this the CAM as a PC camera for video chatting, video conference and other PC camera applications.
Windows XP: Over Service Pack 1 - Hi Speed USB
Mac OS X: Over 10.3. - Hi Speed USB
1.
2.
System Environment
Connect the CAM to the PC with the USB cable.
Move [Mode Selector] down to turn on the CAM.
◆ USB
Windows Environment
2
USB 1.1 MassStorage
mode screen appears automatically.
PC-Cam
Back
PictBridge
Macintosh Environment
Minimum
Recommended
Minimum
Recommended
CPU
Pentium III, 600MHz
Pentium 4, 2GHz
G3 500MHz
G4 Processor
OS
Windows 98SE/ME
Windows 2000/XP
Mac OS 10.2
Mac OS 10.3
Memory
128MB
512MB or above
128MHz
512MB or above
Free space
on the hard disk
200MB(For applications only.
Apart from this,
1GB or more free space
2GB or above
200MB(For applications only.
Apart from this,
1GB or more free space
2GB or above
Display Resolution
800x600 dots
16-bit colour
1024x768 dots
24-bit colour
800x600 dots
16-bit colour
1024x768 dots
24-bit colour
USB
USB 1.1
USB 2.0 High Speed
USB 1.1
USB 2.0 High Speed
USB Mode
USB 2.0 MassStorage
3.
Move the [ ▲ /▼ ] switch to select <PC-Cam> and press the [OK] button.
3
USB Mode
USB 2.0 MassStorage
USB 1.1 MassStorage
PC-Cam
Back
PictBridge
Notes
✤
✤
✤
✤
✤
102
Not all PCs configured with the above environment are guaranteed to operate properly.
PCs used via a USB hub or with a USB card are out of the scope of guarantee.
If your OS is Windows 2000/XP, log in as the [Administrator(administrator of the PC)] (or a user with the equivalent privileges) to
install the OS.
If the capacity of PC is low, the video file may not be played normally or the file is often stopped.
If the capacity of PC is low, it may take long time to edit the video file.
Notes
✤
✤
✤
This function requires the specified USB Streaming Driver and Software to be installed. Refer to page 112 for further details.
The CAM can be used as a PC Camera for programs such as Windows Messenger. The use of the PC Cam varies depending on the
Software. Refer to the documentation of the respective software products.
PC-Cam function is operated as ‘Full Speed’ in the capacity of Windows ME or over.
103
VP-M102 UK_4-Setting 2004.12.20 11:38 AM Page 104
ENGLISH
Setting the CAM : Using USB Mode
5
Connecting the CAM to a Printer
By connecting the CAM to printers with PictBridge support (sold separately), you can send images
from the internal memory or external memory (Memory Stick or Memory Stick Pro) directly to
2
the printer with a few simple operations.
1.
2.
3.
USB 2.0 MassStorage
Connect the CAM to the printer with PictBridge support with the USB cable.
Move [Mode Selector] down to turn on the CAM.
◆ USB
USB 1.1 MassStorage
3
Connecting the CAM with other Devices . . . . . . . . 106
Connecting the CAM to TV . . . . . . . . . . . . . . . . . . . . . . . 106
Connecting the CAM to VCR or DVD Recorder . . . . . . . . 107
Copying Video files to a VCR Tape . . . . . . . . . . . . . . . . . 108
Connecting the CAM to a PC using the USB cable . . . . . 109
PC-Cam
Back
PictBridge
mode screen appears automatically.
Move the [ ▲ /▼ ] switch to select <PictBridge> and press the [OK] button.
USB Mode
Miscellaneous
Information
USB Mode
USB 2.0 MassStorage
USB 1.1 MassStorage
PC-Cam
Back
PictBridge
Installing Programs . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
Installing Image Mixer . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
Installing for using PC-Cam . . . . . . . . . . . . . . . . . . . . . . . 112
Installing Windows98SE Driver . . . . . . . . . . . . . . . . . . . . 113
Printing Photos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
4.
5.
6.
7.
Move the [ ▲ /▼ ] switch to select <Date> and press the [OK] button.
4
Move the [ ▲ /▼ ] switch to select <On> or <Off> and press the [OK] button.
Move the [ ▲ /▼ ] switch to select <Copies> and press the [OK] button.
Move the [ ▲ /▼ ] switch to select desired number and press the [OK] button.
◆ You
8.
can select the number of copy from 1 to 99.
Move the [ ▲ /▼ ] switch to select <Print> and press the [OK] button.
Notes
PictBridge 100-0056
Date
Off
Copies
1
Printing with PictBridge Function . . . . . . . . . . . . . . . . . . . 115
Printing Photos with DPOF Files . . . . . . . . . . . . . . . . . . . 116
Print
Next Photo
Previous Photo
5
PictBridge 100-0056
Date
On
Copies
1
Print
Next Photo
✤
✤
104
If you select <Back> in the menu, the previous menu appears.
If you want to select the next or previous photo, select <Next> or <Previous> using [ ▲ /▼ ] switch.
Previous Photo
105
VP-M102 UK_5-Info 2004.12.20 11:39 AM Page 106
ENGLISH
ENGLISH
Miscellaneous Information: Connecting the CAM with other Devices
Connecting the CAM to TV
Miscellaneous Information: Connecting the CAM with other Devices
Connecting the CAM to VCR or DVD Recorder
You can connect the CAM to a TV set directly to play video files on TV monitor.
You can connect the CAM to VCR to copy the recorded files to the video tape.
1.
1.
2.
3.
Connect the AV Input/Output cable to the
AV Input/Output Jack of the CAM.
Connect the Video/Audio cable to the external
input terminal of your TV set by matching the
colours of the terminals.
Move [Mode Selector] down to turn on
the CAM.
Line Input
3.
◆ The Video Record screen appears.
4.
Press the [Back] button to play the video file
in Video Record mode.
5.
Move [▲ /▼ ] switch to find the video file
you want to play.
Press the [OK] button to play the video file.
6.
2.
4.
Notes
106
Line Input
Line Output
1 ALARM IN 2 ALARM OUT 3 ALARM RESET 4 GND 5 TRIGGER OUT
6 TAPE END OUT 7 SERIES OUT 8 GND 9 SERIES IN 10 1 SHOT REC IN
1
OUT
2
3
4
5
6
7
8
9
10
IN
OUT
IN
Line Input
Connecting the Video/Audio
cable directly is available
Note
✤
✤
✤
✤
Connect the Video/Audio cable to the
AV Input/Output Jack of the CAM.
Connect the Video/Audio cable to the external
input terminal of your VCR set by matching the
colours of the terminals.
Connect the Video/Audio cable to the Video line
Output and TV line Input.
Select the Input on the TV, VCR or
the remote control of TV.
If TV set has no Line Input, you cannot view the output screen of
the CAM.
Connecting the Video/Audio
cable directly is available
You can stop and play video files using the same button as used for playing video files on the LCD monitor of the CAM. (Refer to page 38)
If you AV Mono cable to the CAM, the video file cannot be played.
If you connect the AV Jack to the cradle and the CAM simultaneously, AV output signal decreases to 50%.
Connect the AV Jack to the only one side.
107
VP-M102 UK_5-Info 2004.12.20 11:39 AM Page 108
ENGLISH
Miscellaneous Information: Connecting the CAM with other Devices
Copying Video files to a VCR Tape
ENGLISH
Miscellaneous Information: Connecting the CAM with other Devices
Connecting the CAM to a PC using the USB cable
You can copy your recorded files to a regular blank video tape. Connect the CAM to a VCR using the Audio/Video cable before
recording.
You can connect the CAM to a PC that supports USB connections.
Use the provided USB cable for connection to a PC.
1.
2.
1.
2.
Insert the blank video tape to the VCR and select ‘Line Input’.
Move [Mode Selector] down to turn on the CAM and move it down again.
◆ The Mode Selection screen appears.
3.
4.
5.
Select <Play> in the Video mode to find the desired video file with the [ ▲ /▼ ] switch.
(Refer to page 38)
Move the [ ▲ /▼ ] switch to find the video file you want to copy and press the [OK] button.
Press the [Record/Stop] button on the VCR to start recording.
3.
Insert the cradle into the CAM.
Connect the provided USB cable to USB port of
the cradle.
Move [Mode Selector] down to turn on the CAM
and move it down again.
◆ The Mode Selection screen appears.
4.
Connect the other side of the USB cable to the
USB port of your PC.
Notes
✤
✤
108
Refer to operating instructions of your TV or VCR for detailed information on connecting external devices.
You can stop and play video files using the same button as used for playing video files on the LCD monitor of the CAM. (Refer to page 38)
109
VP-M102 UK_5-Info 2004.12.20 11:39 AM Page 110
ENGLISH
Miscellaneous Information: Installing Programs
Installing Image Mixer
You can edit the video file with this program. And you can use the PC Camera function.
Windows
1.
2.
Miscellaneous Information: Installing Programs
Macintosh
1.
2.
<Iminst.exe>.
Click <ImageMixer>
Select the language.
Follow the steps appeared on the monitor.
Quit the file and folder you work.
Insert the program CD into the CD-ROM drive.
◆ The Setup screen appears automatically.
◆ If not, double-click the CD-ROM icon on the Desktop,
Quit the file and folder you work.
Insert the program CD into the CD-ROM drive.
◆ The Setup screen appears automatically.
◆ Open the CD-ROM Drive in ‘My Computer’ and double-click
3.
4.
5.
ENGLISH
and double-click <Iminstall>.
3.
4.
5.
Click <ImageMixer>.
Select the language.
Follow the steps appeared on the monitor.
◆ You can use ImageMixer after restarting your PC.
◆ You can use the Image Mixer after restarting your PC.
Notes
✤
✤
✤
✤
110
If Image Mixer appears to not be installed, re-install it again but you should first attempt to uninstall it. Uninstalling ‘Image Mixer’ should be
done via the ‘Control Panel’ on your PC.
If you play the MPEG4 video file, the ratio of the screen may not match due to the pixel.
If you click "ImageMixer", all softwares in the program CD are installed automatically.
It is necessary to install ImageMixer for playback the CAM recorded video files on your PC.
111
VP-M102 UK_5-Info 2004.12.20 11:39 AM Page 112
ENGLISH
Miscellaneous Information: Installing Programs
Installing for using PC-Cam
Windows
1.
2.
3.
4.
Miscellaneous Information: Installing Programs
Installing Windows98SE Driver (For only Windows98SE)
To use the CAM as a removable drive on Windows98SE, you may need to install the Windows98SE Driver.
Insert the program CD into the CD-ROM drive.
Fix the CAM into the cradle and connect it to a PC with the USB cable.
Locate the G:\PC_CAM\ folder on the CD.
Follow the steps on the monitor.
1.
Insert the program CD into the CD-ROM drive.
2.
◆ If the message of Windows Logo Test to confirm compatibility appears,
3.
Fix the CAM into the cradle and connect it to a PC with
the USB cable. The PC recognises the CAM and ‘Found
New Hardware Wizard’ appears.
Locate the G:\Storage folder on the CD.
4.
Follow the steps on the monitor.
press ‘Next’.
112
ENGLISH
113
VP-M102 UK_5-Info 2004.12.20 11:39 AM Page 114
ENGLISH
Miscellaneous Information: Connecting the CAM with other Devices
Disconnecting USB Connection
After completing the data transfer, you must disconnect the cable in the following way.
1. Select the removable disk icon and click the right mouse button to select ‘Safely Remove Hardware’.
2. Select ‘Stop’ and disconnect the USB cable when the pop-up screen disappears.
ENGLISH
Miscellaneous Information: Printing Photos
Printing with PictBridge Function
With the PictBridge Support, you can control the printer directly through
the CAM in order to print out stored pictures.
For direct printing of your stored pictures using the PictBridge function,
you must connect the CAM to a PictBridge printer using a USB cable.
Notes
✤
✤
✤
✤
✤
✤
If you disconnect the USB cable from the PC or the CAM during the data transfer,
the data transfer will stop and the data may be damaged.
If you connect the USB cable to a PC using a USB HUB or with other device at the same time,
it might cause conflict and may not work properly. If this occurs, remove all other devices and try the connection again.
The CAM may operates abnormally in the recommended system environment depending on the assembling of PC.
For example, the video file is played abnormally.
Once you select the USB 2.0 MassStorage, USB 1.1 MassStorage, PC-Cam or PictBridge, you cannot select
the modes. Disconnect the USB cable or turn on the CAM again to select the modes.
If you disconnect the USB cable, the message ‘Now refresh file list’ appears for 1 second.
All operation mentioned on the page 102 may not guaranteed in the system environment.
1.
2.
Connect the CAM to the PC with the USB cable.
Move [Mode Selector] down to turn on the CAM.
◆ USB
3.
4.
5.
Move the [ ▲ /▼ ] switch to select <PictBridge> and press the [OK] button.
Move the [ ▲ /▼ ] switch to select <Copies> and press the [OK] button.
Move the [ ▲ /▼ ] switch to select desired number and press the [OK] button.
◆ You
6.
menu screen appears automatically.
can select the number of copy from 1 to 99.
Move the [ ▲ /▼ ] switch to select <Print> and press the [OK] button.
USB Mode
USB 2.0 MassStorage
USB 1.1 MassStorage
PC-Cam
Back
PictBridge
PictBridge 100-0056
Date
Off
Copies
5
Print
Next Photo
Previous Photo
PictBridge 100-0056
Notes
✤
✤
✤
114
If you select <Back> in the menu, the previous menu appears.
If you want to select the next or previous photo, select <Next> or <Previous> using [ ▲ /▼ ] switch.
For further details about printing photos, refer to the User’s manual of the printer.
Date
Off
Copies
5
Print
Next Photo
Previous Photo
115
VP-M102 UK_5-Info 2004.12.20 11:39 AM Page 116
ENGLISH
Miscellaneous Information: Printing Photos
Printing Photos with DPOF Files
DPOF (Digital Printing Order Format) defines the print information for the specific photos and number of each photo
on the Memory Stick or Memory Stick Pro. You can easily make prints on a DPOF compatible printer or order copies.
Printing DPOF files of the Memory Stick
1. Set the print information for the photo you want to print. (Refer to page 59)
2. Insert the Memory Stick into the photo printer.
3. Follow the steps of the printer to print out photos.
ENGLISH
Maintenance : Cleaning and Maintaining the CAM
After using the CAM
✤
✓
✓
✓
✤
✤
✤
✤
For further details about printing photos, refer to the User’s manual of the printer.
✤
✓
✓
✓
To conserve battery power, be sure to turn off the CAM power when not in use.
Battery consumption may vary depending on the condition of use. Recording with many starts and stops,
frequent zooming, and recording in low temperatures will shorten actual recording times.
Dispose of used battery packs promptly. Do not dispose of them in fire.
The battery pack will become warm during charging and use. This is not a malfunction.
The battery pack has a limited service life. If the period of use becomes noticeably shorter with a normal charge,
the battery pack is at the end of its service life. Replace it with a new battery pack.
For the safe use of the Memory Stick and the Memory Stick Pro, follow these.
✓
✓
✓
✓
✓
116
Excessive humidity, steam, soot or dust
Excessive shock or vibration.
Extremely high (over 50°C or 122°F) or extremely low (under 0°C or 32°F) temperatures.
Strong electromagnetic fields.
Direct sunlight or in a closed car on a hot day.
For the safe use of the battery pack, follow these.
✓
✓
✤
Turn the CAM off.
Remove the Battery Pack (refer to page 19).
Remove the Memory Stick (refer to page 33).
To prevent any damage to the LCD monitor, do not apply excessive force on its moving parts.
Do not drop or in anyway shock the CAM.
For prolonged use of the CAM, avoid using it in places subject to excessive humidity or dust.
Do not leave the CAM in places subject to:
✓
✓
✓
✓
✓
Note
✤
For the safekeeping of the CAM, follow these steps.
The Memory Stick should be stored away from heaters and other heat sources. Avoid storing Memory Sticks under direct
sunlight and avoid electromagnetic fields.
Do not power off any devices while transferring data, as this may destroy the data.
Back up your image data often to a hard disk or other permanent storage media.
Format the Memory Stick periodically.
When formatting the Memory Stick or Memory Stick Pro, format in the CAM. If you format it on PC, use the
‘Memory Stick Formatter’ in the supplied software CD.
117
VP-M102 UK_5-Info 2004.12.20 11:39 AM Page 118
ENGLISH
Maintenance : Cleaning and Maintaining the CAM
Cleaning the Body
✤
To Clean the Exterior of the CAM
✓
✓
✓
✓
✓
To clean the exterior, use a soft dry cloth. Wipe the body gently.
Do not apply excessive force when cleaning, gently rub the surface.
The LCD monitor surface should not be pressed. Use a soft dry cloth to clean the surface.
To clean the lens, use an optional air blower to blow out dirt and other small objects. Do not wipe the lens with cloths
or your fingers. If necessary, use lens cleaning paper.
Do not use thinner, alcohol or benzene for cleaning. Otherwise, the finish may be damaged.
Cleaning should be done only after the battery pack has been removed, and other power sources have been
disconnected.
ENGLISH
Maintenance : Cleaning and Maintaining the CAM
Using the CAM Abroad
✤
Each country or region has its own electric and colour systems.
✤
Before using the CAM abroad, check the following items:
Power Sources
✤
You can use the CAM in any country or area with the supplied AC Power Adapter where the power input range is
100V ~ 240V, 50/60Hz.
✤
Use a commercially available AC plug adapter if necessary, depending on the design of the local wall outlets.
Colour System
✤
Note
✤
If the lens look dimmer, turn off the CAM and leave it for about 1 hour.
Using the Built-in Rechargeable Battery
The CAM incorporates a rechargeable lithium cell that maintains the date and other settings even when the AC adaptor
and the battery are removed. The rechargeable lithium cell is automatically recharged when the CAM is used.
Charging the Built-in Rechargeable Battery
✤
118
If The CAM is not used at all, the cell runs down in 5 days. In this case, connect the AC adaptor to the CAM
and turn on the power switch. Then leave it for 24 hours.
After that, set the date and other settings again.
You can view your video files using the built-in LCD monitor.
However, to view your recordings on a television set or to copy it to a video cassette recorder (VCR), the television set or the VCR
must comply with PAL-compatible and have the appropriate Audio / Video ports. Otherwise, you may need to use a separate Video
Format Transcoder (PAL-NTSC format Converter).
PAL-Compatible Countries / Regions
Australia, Austria, Belgium, Bulgaria, China, CIS, Czech Republic, Denmark, Egypt, Finland, France, Germany, Greece, Great Britain,
Holland, Hong Kong, Hungary, India, Iran, Iraq, Kuwait, Libya, Malaysia, Mauritius, Norway, Romania, Saudi Arabia, Singapore, Slovak
Republic, Spain, Sweden, Switzerland, Syria, Thailand, Tunisia, etc.
NTSC-Compatible Countries / Regions
Bahamas, Canada, Central America, Japan, Mexico, Philippines, Korea, Taiwan, United States of America, etc.
119
VP-M102 UK_5-Info 2004.12.20 11:39 AM Page 120
ENGLISH
ENGLISH
Troubleshooting
Troubleshooting
Self Diagnosis Display
Display
Not enough free space
Corrupted file
Paper error
Printer error
Ink error
Wrong error
USB transfer error
Low battery
Holding the key
Card error
Not formatted
Write error
Read error
Not supported format
Informs that
Not enough free space for saving files
The file is corrupted
The paper is insufficient.
The paper is caught in the printer.
Ink is low.
The file is wrong.
The error is occurred while transferring data.
Battery is low.
The hold key is locked.
The memory card is corrupted.
Format the memory card.
Failed to write.
Failed to read.
The format is not supported.
Write protected
MPEG decoding error
Memory Stick is protected to write.
The video file is corrupted.
Action
Check the space of internal memory or the Memory Stick.
Delete the corrupted file.
Check the paper in the printer. If there is no paper, insert paper.
Check that paper is caught in the printer. Pull out the caught paper.
Check if the ink or toner is low.
Check that the file is JPEG.
Disconnect the USB cable and connect it again.
Charge the battery pack or connect the AC Adapter.
Unlock the hold key and operate the CAM.
Format the Memory Stick or replace it with new one.
Format the Memory Stick.
Check the memory space or format the memory.
Delete the file.
The AVI or JPEG file that is not supported. Check the supported file
on the page 29.
Unlock the Memory Stick.
Delete the corrupted file.
Symptom
Colour balance of picture is not natural
Digital zoom does not work
Files stored in the Memory Stick
cannot be deleted
Images on the LCD monitor appear
dark
Possible Causes
White balance adjustment is required
Digital special effect is applied
Memory Stick is protected
File is locked
Ambient is too bright
Ambient temperature is too low
Rear of the LCD monitor is hot
Prolonged use of LCD monitor
Play, rewind and fast forwarding do
not work
Memory Stick cannot be played
back (Photo mode)
No picture is taken when is fully
pressed
The Photo Mode is selected
Measure
Set proper white balance, page 65
Turn off the digital special effects, page 51
Remove the protection tab of Memory Stick
Remove the lock on the file, page 82
Adjust the brightness and angle of LCD
Low temperatures might produce a dark LCD display
This is not a malfunction
Close the LCD monitor to turn if off,
or turn your device off to cool down
Select ‘Video Mode’ and select ‘Play’
The Video Mode is selected
Select ‘Photo Mode’ and select ‘View’
Not enough free memory space is
remained
Memory card is formatted by different
devices
Light is forced to cancel
Light is not available for recording
The Photo Mode is selected
Delete files from the Memory Stick
Format the Memory Stick on the CAM
Built-in Light will fire
✤
If these instructions do not solve your problem, contact your nearest Samsung dealer or authorized service centre/personnel.
Symptom
No power is supplied
DATE/TIME is wrong
Focus does not adjust automatically
The Memory Stick will not
load properly
120
Possible Causes
The power is not connected properly
The battery is dead
The battery is too cold
The DATE/TIME is not set
Focus is set to manual mode
Recording was done in a dark place
Lens is covered with condensation
Memory stick is in wrong position
Something fills in the Memory Stick slot
Measure
Connect the AC adapter properly, page 23
Replace the dead battery pack
Warm up the battery or move to warmer place
Set the DATE/TIME, pages 88~89
Set focus to AUTO
Use strobe or lit the place
Clear the lens and check the focus
Insert the Memory Stick properly, page 33
Clear the Memory Stick slot
Cannot Record a video
Select different Light mode, page 62
Select ‘Video Mode’
121
VP-M102 UK_5-Info 2004.12.20 11:39 AM Page 122
ENGLISH
ENGLISH
Using the Menu
Using the Menu
Video
1. Record
2. Play
3. File Options
Delete
Selected
All
Cancel
Lock
Selected
All
Cancel
Copy To
Selected
All
Cancel
PB Option
Selected
All
Cancel
Back
4. Settings
Size
720
352
Quality
Super Fine
Fine
Normal
Focus
AF
MF
EIS
Photo
White Balance
Auto
Hold
Outdoor
Indoor
Program AE
Auto
Sports
Spotlight
Sand/Snow
HS Shutter
BLC
Off
On
Effect
Off
Art
Mosaic
Sepia
Negative
Mirror
B&W
Emboss
Digital Zoom
Off
On
Back
5. Back
1. Capture
2. View
3. File Options
Delete
Selected
All
Cancel
Lock
Selected
All
Cancel
Copy To
Selected
All
Cancel
DPOF
Back
4. Settings
Size
800✕600
640✕480
Light
Auto
On
Off
Focus
AF
MF
EIS
On
Off
MP3
White Balance
Auto
Hold
Outdoor
Indoor
Program AE
Auto
Sports
Spotlight
Sand/Snow
HS Shutter
BLC
Off
On
Back
5. Back
1. Play Options
Repeat
All
Off
One
Back
2. File Options
Delete
Selected
All
Cancel
Lock
Selected
All
Cancel
Copy To
Selected
All
Cancel
Back
3. Back
Voice Recorder
1. Record
2. Play
3. File Options
Delete
Selected
All
Cancel
Lock
Selected
All
Cancel
Copy To
Selected
All
Cancel
Back
4. Back
File Browser
1. Delete
Selected
All
Cancel
2. Lock
Selected
All
Cancel
System Settings
1. Display
LCD Brightness
0%
...
100%
LCD Colour
0%
...
100%
Back
USB Mode
3. System
Auto Shut off
Off
5 Minutes
Demo
Off
5 Minutes
Play Now
Start-up
Video Mode
Previous Mode
3. Copy To
2. Date/Time
Selected
All
Cancel
Set Time
Set Date
Date Format
4. File Info
YY/MM/DD
DD/MM/YY
MM/DD/YY
Beep Sound
Close
5. Back
Time Format
Version Info
Back
12 Hour
24 Hour
Back
1. USB 2.0 MassStorage
2. USB 1.1 MassStorage
3. PC-Cam
4. PictBridge
File No.
Series
Reset
On
Off
4. Memory
Storage Type
Internal
External
Format
Internal
External
Memory Space
000MB/000MB
Back
5. Back
On
Off
122
123
VP-M102 UK_5-Info 2004.12.20 11:39 AM Page 124
ENGLISH
ENGLISH
Specifications
Model Name
the CAM System
Video Recording System
Photo System
MP3
Voice
Memory
Recording/Playing time
CCD Pixel
Optical Zoom Ratio
Focal Length
Minimum Illumination
LCD Monitor
Cradle Connectors
USB
The CAM Connector
AV Output
DC Power In Connector
General
Operating Temperature
Operating Humidity
Power Source
Power Consumption
Dimension(WxHxD)
Weight
Built-in Microphone
124
Specifications
VP-M102/VP-M105/VP-M110
MPEG4 AVI Format
JPEG (DPOF, Exif 2.2)
Stereo Playing
WAVE file record/play (8KHz Sampling, 16 bit, Stereo)
Internal memory/Memory Stick/Memory Stick Pro
Refer to page 30
1/6 inch CCD, 800K(Maximum)
x10
f=2.4~24mm, F1.8~2.4
3.0 Lux
2.0” Trans Reflective, 210K
Model Name
The CAM Connectors
Earphone
Common connector
AV output
Cradle Connector
DC Power In Connector
AC Adapter
Power Requirement
DC Output
Dimensions
Weight
VP-M102/VP-M105/VP-M110
ø 3.5 Stereo
Video (1.0p_p, 75 ), Audio (-7.5dBm 47K , Stereo)
Special 22Pin Connector
Special 22Pin Connector
AC 100~240V, 50/60Hz
DC 4.8V, 1.0A
70mm x 30mm x 42mm
80g (Including DC cable)
Mini-B type (USB 2.0 High Speed)
Special 22Pin Connector
Video (1.0Vp_p), Audio (-7.5dBm 47K , Stereo)
Special 22Pin Connector
0°C~40°C
10%~80%
3.8V (Li-Polymer Battery pack), 4.8V (AC Adapter)
3.0W (LCD ON)
58.8mm x 92.7mm x 26.3mm
150g (Including the Lithium Polymer Battery Pack)
Omni-directional Stereo condenser microphone
125
VP-M102 UK_5-Info 2004.12.20 11:39 AM Page 126
ENGLISH
ENGLISH
Index
Index
-A-
EIS ................................................................................................47, 64
AF...................................................................................................46, 63
Auto Shut off ........................................................................................92
Memory type ........................................................................................32
Menu button .........................................................................................14
MF ................................................................................................46, 63
-TTime......................................................................................................88
Troubleshooting..................................................................................120
-F-
Beep Sound .........................................................................................96
BLC ................................................................................................50, 67
File Browser .........................................................................................81
Focus..............................................................................................46, 63
Format ..................................................................................................99
Function button ....................................................................................26
-C-
-I-
Capturing..............................................................................................54
Cleaning and Maintaining the CAM ...................................................117
Image Mixer........................................................................................110
-L-
-W-
-D-
LCD Brightness ....................................................................................86
LCD Colour...........................................................................................87
Light......................................................................................................62
Lithium Polymer Battery pack..............................................................13
White Balance................................................................................48, 65
-B-
-O-
-U-
OSD......................................................................................................16
USB Cable ...........................................................................................13
USB mode..........................................................................................101
-P-
Date ......................................................................................................89
Demo....................................................................................................93
Digital Zoom .........................................................................................52
Display button ......................................................................................27
DPOF............................................................................................59, 116
-E-
126
-YVersion Information ..............................................................................97
-RRepeat Play..........................................................................................72
-ZZooming In and Out.......................................................................37, 55
-S-M-
Effect ...................................................................................................51
PB Option.............................................................................................43
PictBridge ...........................................................................................115
Power switch ........................................................................................14
Program AE....................................................................................49, 66
Memory Space..................................................................................100
Memory Stick .......................................................................................33
Start-up Mode ......................................................................................94
Storage type.........................................................................................98
127
VP-M102 UK_5-Info 2004.12.20 11:39 AM Page 128
ENGLISH
Power Sources (United Kingdom Only)
UNITED KINGDOM
The mains lead on the power adapter is supplied with a moulded plug incorporating a fuse.
The value of the fuse is indicated on the pin face of the plug and, if it requires replacing, a fuse approved to
BS1362 of the same rating must be used.
Never use the plug with the fuse cover omitted if the cover is detachable.
If a replacement fuse cover is required, it must be of the same colour as the pin face of the plug.
Replacement covers are available from your dealer.
If the fitted plug is not suitable for the power points in your house or the cable is not long enough to reach a power point,
you should obtain a suitable safety approved extension lead or consult your dealer for assistance.
However, if there is no alternative to cutting off the plug, remove the fuse and then safely dispose of the plug.
Do NOT connect the plug to a mains socket as there is a risk of shock hazard from the bared flexible cord.
IMPORTANT
The wires in the mains lead are coloured in accordance with the following code:
BLUE = NEUTRAL
BROWN = LIVE
As these colours may not correspond to the coloured marqueings identifying the terminals in your plug, proceed as follows:
The wire coloured BLUE must be connected to the terminal marqueed with the letter N or coloured BLUE or BLACK.
The wire coloured BROWN must be connected to the terminal marqueed with the letter L or coloured BROWN or RED.
This Samsung product is warranted for the period of twelve
(12) months from the original date of purchase, against
defective materials and workmanship. In the event that
warranty service is required, you should return the product to
the retailer from whom it was purchased.
However, Samsung Authorised Dealers and Authorised
Service Centres in other EC Countries will comply with the
warranty on the terms issued to purchasers in the country
concerned. In case of difficulty, details of our Authorised
Service Centres are available from:
Samsung Electronics (U.K.) Ltd.,
Euro Service Centre, Stafford Park 12,
TELFORD, Shropshire TF3 3BJ,
Tel: 0870) 242 0303, Fax: 01952) 297617
■ WARRANTY CONDITIONS
WARNING
NOTE
128
Do not connect either wire to the earth terminal marqueed with the letter E or the earth symbol,
or coloured GREEN or GREEN and YELLOW.
This page is applicable to Great Britain only.
,
1. The warranty is only valid if, when warranty service is
required, the warranty card is fully and properly completed
and is presented with the original invoice or sales slip or
confirmation, and the serial number on the product has not
been defaced.
2. Samsung’s obligations are limited to the repair or, at its
discretion, replacement of the product or the defective part.
3. Warranty repairs must be carried out by Authorised
Samsung Dealers or Authorised Service Centres. No reimbursement will be made for repairs carried out by non
Samsung Dealers and, any such repair work and damage to
the products caused by such repair work will not be covered
by this warranty.
REPUBLIC OF IRELAND
4. This product is not considered to be defective in materials
nor workmanship by reason that it requires adaptation in
order to conform to national or local technical or safety
standards in force in any Country other than the one for
which the product was originally designed and
manufactured. This warranty will not cover, and no reimbursement will be made for such adaptation nor any
damage which may result.
5. This warranty covers none of the following:
a) Periodic check ups, maintenance and repair or
replacement of parts due to normal wear and tear.
b) Cost relating to transport, removal or installation of the
product.
c) Misuse, including the faiure to use this product for its
normal purposes or incorrect installation.
d) Damage caused by Lightning, Water, Fire, Acts of God,
War, Public Disturbances, incorrect mains voltage,
improper ventilation or any other cause beyond the
control of Samsung.
6. This warranty is valid for any person who legally acquired
possession of the product during the warranty period.
7. The consumers statutory rights in any applicable national
legislation whether against the retailer arising from the
purchase contract or otherwise are not affected by this
warranty. Unless there is national legislation to the contrary,
the rights under this warranty are the consumers sole rights
and Samsung, its subsidiaries and distributors shall not be
liable for indirect or consequential loss or any damage to
records, compact discs, videos or audio taper or any other
related equipment or material.
SAMSUNG ELECTRONICS (U.K.) LTD.
129
VP-M102 UK_5-Info 2004.12.20 11:39 AM Page 130
ELLAS (GREECE)
Agaphtev pelavth,
Saı eucaristouvme gia thn empistosuvnh pou
deivxate sthn
SAMSUNG me thn agorav authvı
thı suskeuhvı.
To proiovn autov thı SAMSUNG eivnai egguhmevno
gia perivodo dwvdeka (12) mhnwvn apov thn
hmeromhniva agoravı tou gia antallaktikav kai
ergatikav. Sthn perivptwsh pou qa creiasteiv
episkeuhv, to proiovn autov thı SAMSUNG qa
prevpei na staleiv hv na metaferqeiv sto
exousiodothmevno service, me evxoda tou
agorasthv.
Exousiodothmevnoi antiprovswpoi kai
exousiodothmevna kevntra service se avlleı
Eurwpaikevı cwvreı, qa apodecqouvn touı ovrouı
thı egguvhshı.
Plhroforiveı gia ta exousiodothmevna kevntra
service sthn Ellavda, mporeivte na pavrete apov
thn
FOURLIS TRADE A.E.B.E.
L. Kruonerivou 112
145 68 Kruonevri, Apikhvı
Thl. 210.629.3100
■ Oroi thı egguvhshı
1. H egguvhsh iscuvei eavn kai movno eavn to
proiovn creiavzetai service kai h kavrta
egguvhshı evcei plhvrwı sumplhrwqeiv kai
130
sfragisqeiv apov to katavsthma agoravı. Epivshı
prevpei na proskomisqeiv kai to timolovgio hv
h apovdeixh
lianikhvı pwvlhshı, pavnw sthn opoiva o
seiriakovı ariqmovı tou proiovntoı prevpei na
eivnai eukrinhvı.
2. H upocrevwsh thı SAMSUNG aforav movno thn
episkeuhv tou proiovntoı
3. H episkeuhv tou proiovntoı prevpei na
anativqetai movno se exousiodothmevna
kevntra service hv exousiodothmevnouı
antiproswvpouı thı SAMSUNG. Kamiva
apozhmivwsh den qa givnei apodekthv gia
episkeuhv pou evcei givnei apov mh
exousiodothmevno apov thn SAMSUNG
sunergeivo.
4. To proiovn autov den qa qewrhqeiv
ellatwmatikov sta ulikav hv sthn ergasiva
episkeuhvı eavn qa prevpei na prosarmosteiv,
metatrapeiv hv ruqmisteiv wvste na
summorfwqeiv me tiı topikevı tecnikevı
prodiagrafevı hv prodiagrafevı pou iscuvoun se
cwvra avllh apov authv gia thn opoiva
proorizovtan hv kataskeuavsthke.
H egguvhsh authv den kaluvptei apozhmiwvseiı
giaÚ
* Kefalevı bivnteo kai kasetofwvnwn
* Kefalevı binteokavmeraı
* Gennhvtrieı aktinwvn Iaser sta CD, DVD
* Thleceiristhvria
* Lucniveı fouvrnwn mikrokumavtwn
* Prosarmogevı, metatropevı hv ruqmivseiı,
anexavrthta an eivnai epituchvı hv
anepituchvı, ouvte opoiadhvpote zhmiva
proevrcetai ex autouv...
5. H egguvhsh authv den kaluvptei kamiva apov tiı
parakavtw periptwvseiıÚ
* Periodikouvı elevgcouı, sunthvrhsh kai
episkeuhv hv antikatavstash merwvn pou
ofeivlontai se fusiologikhv fqorav
* Ta evxoda kai touı kinduvnouı metaforavı
pou scetivzontai me thn egguvhsh autouv tou
proiovntoı
* Zhmiva se autov to proiovn pou proevrcetai
apovÚ
A. Katavcrhsh hv kai kakhv crhvsh,
sumperilambanomevnhı allav kai mh
periorismevnhı seÚ
Mh crhvsh autouv tou proiovntoı gia touı
skopouvı pou fusiologikav proorivzetai hv
suvmfwna me tiı odhgiveı crhvsewı gia thn
swsthv crhvsh kai sunthvrhsh autouv tou
proiovntoı
Thn egkatavstash kai crhvsh tou
proiovntoı me trovpouı pou antivkeintai
stiı tecnikevı prodiagrafevı asfaleivaı pou
iscuvoun katav thn crhvsh tou proiovntoı
B. Episkeuhv pou evgine apov mh
exousiodothmevna sunergeiva service
G. Atuchvmata, qeomhniveı hv opoiadhvpote
aitiva pevra tou elevgcou thı SAMSUNG,
sumperilambanomevnwn allav mh
periorismevnwn twn keraunwvn, tou
nerouv, thı fwtiavı, twn dhmosivwn
anataracwvn, tou kakouv aerismouv klp.
D. H egguvhsh authv den ephreavzei ta
dikaiwvmata tou katanalwthv pou
problevpontai apov thn efarmosteva
eqnikhv nomoqesiva pou iscuvei, ouvte ta
dikaiwvmata twn katanalwtwvvvn
enantivon twn lianopwlhtwvvvvn pou
aporrevoun apov thn suvmbash pwvlhshı.
E. Se perivptwsh pou den upavrcei eqnikhv
nomoqesiva authv h egguvhsh qa eivnai h
monadikhv kai apokleistikhv kavluyh tou
katanalwthv gia kavqe zhmiav.
FOURLIS TRADE A.E.B.E.
131