Cisco Aironet 1400 Wireless Bridge

Data Sheet
Cisco Aironet 1400 Series Wireless Bridge
OVERVIEW
The Cisco Aironet® 1400 Series Wireless Bridge creates a new benchmark for wireless bridging by providing a high-performance and
feature-rich solution for connecting multiple LANs in a metro area. Building a metropolitan area wireless infrastructure with the Cisco
Aironet 1400 Series Wireless Bridge provides deployment personnel with a flexible, easy to use solution that meets the security
requirements of wide area networking professionals. Designed to be a cost-effective alternative to leased lines, it is engineered specifically
for harsh outdoor environments, yet also works well in indoor deployments. The Cisco Aironet 1400 Series Wireless Bridge is the premier
high-speed, high-performance outdoor bridging solution for line-of-sight applications, providing features such as:
●
Support for both point-to-point or point-to-multipoint configurations (Figure 1)
●
Industry leading range and throughput, supporting data rates up to 54 Mbps
●
Enhanced security mechanisms based on 802.11 and 802.11i standards
●
Ruggedized enclosure optimized for harsh outdoor environments with extended operating temperature range
●
Integrated or optional external antennas for flexibility in deployment
●
Designed specifically for ease-of-installation and operation
BRIDGING FIXED NETWORKS
The Cisco Aironet 1400 Series Wireless Bridge can be used to provide either:
1.
The sole connection
2.
The primary connection with an additional technology such as a T1 line providing redundancy, or
3.
As a back up solution for additional resiliency in conjunction with other technologies such as fiber optics.
Ideal applications include:
●
Local Government—Backbone (backhaul) portion of community-based municipal networks such as public safety networks, or any
fixed network location
●
Education—Higher education campus building interconnects and K-12 schools within a metropolitan area
All contents are Copyright © 1992–2006 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 1 of 11
●
Healthcare—Hospital campuses and physician offices
●
Enterprise Campus—Building-to-building links (point-to-point or point-to-multipoint), or any situation where a company needs to
expand across an area where right-of-way is not possible
●
Service Provider—Backhaul to aggregate multiple lower-speed links into a higher speed link
Figure 1.
Point-to-Point and Point-to-Multipoint Applications
Mobile Networks and Wireless Bridges
The concept of mobile networks is significant not only for service providers looking to offer seamless network access, but also for
individual organizations such as municipal public safety units. In many instances, the technology exists to create the zones that provide
the mobile network, but the challenge lies in bringing the network to these zones. The Cisco Aironet 1400 Series Wireless Bridge provides
a cost-effective solution to this application. The wireless bridge can connect to the network that contains the 2.4 GHz access points or
bridges that are providing wireless zone coverage, and also provide the backhaul link to the high-speed network (Figure 2). Whether these
zones are 802.11 hot spots at cafes and restaurants or bridged 802.11b cells for mobile networks, the Cisco Aironet 1400 Series Wireless
Bridge provides a non-interfering and higher speed distribution service.
All contents are Copyright © 1992–2006 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 2 of 11
Figure 2.
Public Safety Network Utilizing Wireless Bridges
ROI
The high-speed links between the wireless bridges deliver throughput several times faster than E1/T1 lines for a fraction of the cost—
eliminating the need for expensive leased lines or difficult-to-install fiber-optic cable. Because bridges have no recurring charges, savings
on leased-line services quickly pay for the initial hardware investment. The Cisco Aironet 1400 Series with its 54 Mbps throughput
capability connects discrete sites into a single LAN at speeds much greater than leased lines, even when they are separated by obstacles
such as freeways, railroads, or bodies of water that are practically insurmountable using copper or fiber-optic cable.
High Performance
Operating in the unlicensed 5.8 GHz band, the Cisco Aironet 1400 Series Wireless Bridge sets a new standard for performance, combining
powerful 250 mW radios, industry-leading receive sensitivity, installation tools to assist in bridge placement, delay spread capabilities, and
a choice of integrated or connectorized high gain antennas, Cisco provides a complete solution for a wide variety of fixed wireless
applications.
Data rates of 54 Mbps can be enabled for point-to-point links up to 8.5 miles, and for point-to-multipoint links up to 2.75 miles. Aggregate
throughput can be obtained in excess of 28 Mbps. Also, by using higher gain antennas or lower data rates, ranges in excess of 20 miles
point-to-point can be covered.1
1
Aggregate throughput can be obtained in excess of 28 Mbps. Also, by using higher gain antennas or lower data rates, ranges in excess of 20 miles
point-to-point can be covered.
All contents are Copyright © 1992–2006 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 3 of 11
Security
Cisco Aironet has a proven track record for leading the industry with advanced security features. Building on basic wireless security,
support for the Cisco Wireless Security Suite is included with the Cisco Aironet 1400 Series Wireless Bridge (Figure 3), featuring support
for IEEE 802.1X mutual authentication and strong encryption with Temporal Key Integrity Protocol (TKIP). Network managers can
confidently deploy a wireless bridging solution that provides robust security and protection, with the ease of centralized management
through a Remote Authentication Dial-In User Service (RADIUS) server such as Cisco Secure Access Control Server (ACS).
Figure 3.
Wireless Bridge Security with the Cisco Wireless Security Suite
Intelligent Network Services
The Cisco Aironet 1400 Series Wireless Bridge utilizes Cisco IOS® Software to provide a familiar user interface with common
functionality, scalability, and security. Additionally, advanced features such as quality of service (QoS) are included, enabling packet
prioritization for voice, video, and data. Trunking up to 24 voice-over-IP (VoIP) circuits and data over point-to-point links is also possible.
Bandwidth can be increased between bridged networks through the aggregation of multiple bridges at each site through Fast Ether Channel
(FEC), or Port Aggregation Protocol (PAg-P), or through routing protocols. For a multipurpose network, Virtual Local Area Networks
(VLANs) can be configured by allowing different non-root bridges operating on the same root bridge to trunk different VLANS. Network
services can now be segmented based upon end user requirements (Figure 4).
All contents are Copyright © 1992–2006 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 4 of 11
Figure 4.
VLAN Configuration for Wireless Bridges
Flexible
Rapid deployment and redeployment can be achieved with no reliance upon telecommunications providers nor a lengthy license or
trenching process. The Cisco Aironet 1400 Series Wireless Bridge allows placement in an outdoor environment without the use of
an expensive additional National Electrical Manufacturers Association (NEMA) enclosure. Further flexibility is achieved by enabling
point-to-point or point-to-multipoint networks with a single product line. The mounting bracket has been designed to allow installation on
poles, walls, and roofs, while also providing a mechanism for choosing the desired polarization. The Cisco Aironet 1400 Series Wireless
Bridge offers an outdoor wireless bridging solution in two product SKUs. The captured antenna version features an integrated radio and
high-gain integrated antenna for user installations of point-to-point links and the non-root nodes of point-to-multipoint networks.
The connectorized version provides professional installers with an N-Type connector that allows the deployment of the root nodes of pointto-multipoint networks with omni-directional or sector antennas, or of high gain dish antennas for longer links. The external antenna
options are:
●
9.0 dBi vertically polarized omni antenna
●
9.5 dBi sector antenna with support for vertical or horizontal linear polarization
●
28.0 dBi dish antenna with support for vertical or horizontal linear polarization
Ease of Use
Based upon IEEE 802.11a technology and utilizing the same Cisco IOS Software as in a wired network, the Cisco Aironet 1400 Series
provides a user with a familiar experience that supports an “out-of-the-box” deployment. Convenient LEDs and an externally accessible
Received Signal Strength Indicator (RSSI) for alignment feedback/diagnostics and a quick-hang mounting bracket allows for an easy
installation process.
All contents are Copyright © 1992–2006 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 5 of 11
To simplify ordering and installation, the Cisco Aironet 1400 Series Wireless Bridge provides the professional or IT installer with all of
the components and accessories necessary to complete most deployments, including:
●
The Cisco Aironet Power Injector LR for supplying power to the bridge without expensive electrician costs (Figure 5). The power
injector also extends the distance the 1400 Series Wireless Bridge can be installed from the network. (Figure 6)
●
The Cisco Aironet 1400 Series Multifunction Mount, with its innovative design, to provide greater ease of installation and
flexibility. The mount comes complete with stainless steel hardware to improve corrosion resistance.
●
Two lengths of shielded Dual RG-6 cables and a building entry point grounding block, all with F-Type connectors for use with
the Power Injector LR and connection to the bridge unit.
●
A power supply and cord, enough coaxial sealant for all outdoor connectors, and corrosion-proof gel to protect grounding
connections.
Figure 5.
Cisco Aironet Power Injector
Figure 6.
Power Injector Distance Extension
All contents are Copyright © 1992–2006 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 6 of 11
Advanced Management Features
The CiscoWorks Wireless LAN Solution Engine (WLSE) is available as a management tool for Cisco Aironet access points operating
autonomously (without a Wireless LAN Controller) and wireless bridges. CiscoWorks WLSE is a turnkey, scalable, and centralized
management platform with an HTML-based interface. It uses Simple Network Management Protocol (SNMP) and Secure Shell
(SSH)/Secure Sockets Layer (SSL) for managing Cisco Aironet access points and wireless bridges via a Web browser.
For more information on CiscoWorks WLSE, visit: http://www.cisco.com/go/wlse
See Table 1 for additional features and benefits. For system specifications of the Cisco Aironet 1400 Series Wireless Bridge see Table 2,
for product specifications see Table 3.
Table 1.
2
Features and Benefits
Features
Benefits
802.11a radio with 24 dBm (250 mW)
maximum transmit power, -70 dBm
2
receive sensitivity at 54 Mbps data rate
The 5.8 GHz radio in the Cisco Aironet 1400 Series offers superior radio performance that results in industryleading range. The greater the range, the higher the supported data rate or the more reliable the link at a given
data rate.
Industry-leading security, network
management, and software feature set
The Cisco Aironet 1400 Series software builds on the feature-rich, customer-driven Cisco Aironet software and
the Cisco Wireless Security Suite, including 802.1X support with mutual authentication and dynamic encryption
keys with TKIP; management through SNMP, Telnet, and Web browsers.
Fully weatherized metal housing
and extended operating temperature
(-30 to 55oC or -22 to 131oF)
The rugged weatherproof design of the Cisco Aironet 1400 Series provides flexibility for deployment in a variety
of settings. The rugged features and broad operating temperature range support deployment in factories,
warehouses, and the outdoors.
The Cisco Aironet Power Injector LR
The Power Injector LR converts the standard 10/100 baseT Ethernet category 5 RJ-45 interface that is suitable
for weather-protected areas to a dual F-Type connector interface for dual coax cables that are more suitable for
harsh outdoor environments. While providing a 100baseT interface to the Cisco Aironet 1400 Series, the Power
Injector LR also provides power to the unit over the same cables with a power discovery feature that protects
other appliances from damage should they accidentally be connected. As an added benefit to the installer, Auto
MDIX is built in, allowing the dual cables to be swapped and while maintaining the same functionality. To support
longer cable runs from your infrastructure network switch or router, the Power Injector LR is designed to
accommodate 100 m coaxial cable run plus 100 m of indoor cat5 cable, to enable total cable runs up to 200
meters. Lightning and surge protection is also included at the F-Type connector interface to provide added
protection to your network infrastructure devices.
Flexible mounting with multifunction mount
or optional roof/wall mount
The Cisco Aironet 1400 Series Multifunction Mount allows the captured antenna Cisco Aironet 1400 Series to
provide either horizontal or vertical polarization. With its quick-hang feature, the mount will support the weight of
the bridge during the alignment process. To assist the installation, hoisting rings are attached to the mount. The
mount will interface to poles or masts from 1.5 in. to 2.5 in. while allowing for elevation and azimuth alignment.
For the connectorized version, the mount provides a wall mount mechanism. The captured antenna Cisco
Aironet 1400 Series can be mounted to a wall, roof, or other flat surface with the addition of the optional Cisco
Aironet 1400 Series Roof/Wall Mount kit.
Wireless root bridge
The wireless root bridge role provides the Cisco Aironet 1400 Series with support for both point-to-point or pointto-multipoint bridging
Wireless non-root bridge
The wireless non-root bridge allows the Cisco Aironet 1400 Series to operate as the remote node in a point-topoint or point-to-multipoint bridge network.
Wireless packet concatenation
The concatenation of smaller packets into larger ones allows the Cisco Aironet 1400 Series to more efficiently
utilize the wireless medium and provide higher overall data throughputs.
Wireless link distance adjustment
The link distance parameter allows the user to tune the carrier sense multiple access with collision avoidance
(CSMA/CA) parameters for the particular range to maximize performance.
Wireless programmable clear
channel assessment
With a programmable clear channel assessment, the Cisco Aironet 1400 Series can be configured to
the particular background interference level found in your environment for reduced contention overhead with
other wireless systems.
Antenna alignment assistance
The Cisco Aironet 1400 Series Wireless Bridge provides an auto-configuration and installation mode for out of
the box deployment of point to point links without the need for a configuration via telnet, File Transfer Protocol
(FTP), or SNMP. This mode drives LEDs and a Received Signal Strength Indicator (RSSI) port with a voltage
output proportional to received signal strength for use in the installation and alignment process. This frees up the
installers to perform their installation process and verify the link quality without requiring Cisco IOS Software or
data networking knowledge.
Diagnostic LEDs
Provide alignment feedback to the installer and diagnostic information to troubleshooters directly at the antenna
24 dBm transmit power only available in FCC configuration units
All contents are Copyright © 1992–2006 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 7 of 11
Features
Benefits
without the use of a computer. Diagnostic information is also provided on the Power Injector LR LEDs
16 megabytes of flash memory
Memory space for future firmware upgrades to support new 802.11 standards and advanced features.
One N-Type connector for external
antenna connection
The N-Type connector is the industry standard for higher performance RF systems in an outdoor environment
®
and is compatible with the Cisco line of optional 5.8 GHz antennas, enabling wireless bridging professional
installers to customize radio coverage for specific deployment scenarios.
Easy weather sealing and grounding
The Cisco Aironet 1400 Series provides standard N-Type and F-Type coaxial cable connectors for easy and
reliable weather sealing and grounding. A coaxial sealant is provided with each system, along with a standard
grounding block to allow the installer to meet National Electric Code guidelines.
Table 2.
Cisco Aironet 1400 Series Wireless Bridge System Specifications
AIR-BR1410A-x-K9
AIR-BR1410A-A-K9-N
Frequency band
5.725 to 5.825 GHz (FCC UNII 3)
5.725 to 5.825 GHz (FCC UNII 3)
Wireless modulation
Coded Orthogonal Frequency Division Multiplexing (COFDM)
Coded Orthogonal Frequency Division Multiplexing (COFDM)
Media access protocol
Carrier Sense Multiple Access with Collision Avoidance
(CSMA/CA)
Carrier Sense Multiple Access with Collision Avoidance
(CSMA/CA)
Modulation
Non-overlapping channels
Receive sensitivity (10% PER
with 3200 byte packets)
● BPSK @ 6 and 9 Mbps
● QPSK @ 12 and 18 Mbps
● BPSK @ 6 and 9 Mbps
● QPSK @ 12 and 18 Mbps
● 16-QAM @ 24 and 36 Mbps
● 64-QAM @ 48 and 54 Mbps
● 16-QAM @ 24 and 36 Mbps
● 64-QAM @ 48 and 54 Mbps
4
4
● 6 Mbps: –83 dBm
● 9 Mbps: –83 dBm
● 6 Mbps: –83 dBm
● 9 Mbps: –83 dBm
● 12 Mbps: –83 dBm
● 18 Mbps: –82 dBm
● 12 Mbps: –83 dBm
● 18 Mbps: –82 dBm
● 24 Mbps: –79 dBm
● 36 Mbps: –76 dBm
● 24 Mbps: –79 dBm
● 36 Mbps: –76 dBm
● 48 Mbps: –72 dBm
● 54 Mbps: –70 dBm
● 48 Mbps: –72 dBm
● 54 Mbps: –70 dBm
Maximum operational
receive level
–19 dBm
–19 dBm
Maximum survivable
receive level
0 dBm
0 dBm
All contents are Copyright © 1992–2006 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 8 of 11
AIR-BR1410A-x-K9
AIR-BR1410A-A-K9-N
● 250 mW (24 dBm)
● 200 mW (23 dBm)
● 155 mW (22 dBm)
● AIR-BR1410A-A-K9
Available transmit
power settings
◦
250 mW (24 dBm)
◦
200 mW (23 dBm)
◦
155 mW (22 dBm)
◦
125 mW (21 dBm)
◦
60 mW (18 dBm)
◦
30 mW (15 dBm)
● 125 mW (21 dBm)
● 60 mW (18 dBm)
● 30 mW (15 dBm)
● 15 mW (12 dBm)
◦ 15 mW (12 dBm)
● AIR-BR1410A-K-K9
◦
155 mW (22 dBm)
◦
125 mW (21 dBm)
◦
60 mW (18 dBm)
◦
30 mW (15 dBm)
◦
15 mW (12 dBm)
● AIR-BR1410A-Z-K9
◦
20 mW (13 dBm)
◦
10 mW (10 dBm)
◦
8 mW (9 dBm)
◦
6 mW (8 dBm)
◦
5 mW (7 dBm)
◦
2.5 mW (4 dBm)
● AIR-BR1410A-E-K9
◦
5 mW (7 dBm)
◦
2.5 mW (4 dBm)
Note: Maximum power setting will vary according to individual country regulations
3
Point-to-point range
● Americas
● Americas
◦
8.5 miles (14 km) @ 54 Mbps
◦
13 miles (21 km) @ 54 Mbps
◦
16 miles (26 km) @ 9 Mbps
◦
23 miles (37 km) @ 9 Mbps
◦
(Antennas are 28 dBi dish)
● Korea
◦
5.5 miles (9 km) @ 54 Mbps
◦ 11.25 miles (18.25 km) @ 9 Mbps
● Australia & New Zealand
◦
3.5 miles (5.75 km) @ 54 Mbps
◦
9.5 miles (15.25 km) @ 9 Mbps
● Ireland & China
Point-to-multipoint range
3
(sector antenna at root)
◦
1.75 miles (2.75 km) @ 54 Mbps
◦
7.25 miles (11.5 km) @ 9 Mbps
● Americas
● Americas
◦
2.75 miles (4.5 km) @ 54 Mbps
◦
4.25 miles (7 km) @ 54 Mbps
◦
8.5 miles (14 km) @ 9 Mbps
◦
11 miles (18 km) @ 9 Mbps
◦
(Non-root antenna is 28 dBi dish)
● Korea
◦
1 mile (1.75 km) @ 54 Mbps
◦ 5 miles (8 km) @ 9 Mbps
● Australia & New Zealand
◦
0.75 miles (1.2 km) @ 54 Mbps
◦
3.25 miles (5.25 km) @ 9 Mbps
● Ireland & China
Antenna
3
4
◦
0.4 miles (0.6 km) @ 54 Mbps
◦
1.75 miles (2.75 km) @ 9 Mbps
4
Captured Linear Polarization; 22.5 dBi gain : 10° E-plane by
12° H-plane beamwidth
One N-Type connector for professional installations
(antennas sold separately)
The distances referenced here are approximations and should be used for estimation purposes only.
AIR-BR1410A-K-K9 has 20 dBi gain
All contents are Copyright © 1992–2006 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 9 of 11
Security
AIR-BR1410A-x-K9
AIR-BR1410A-A-K9-N
Cisco Wireless Security Suite, including:
● Authentication
Cisco Wireless Security Suite, including:
● Authentication
◦
● Encryption
SNMP compliance
Table 3.
◦
802.1X support including LEAP to yield mutual
authentication and dynamic per-user, per-session
encryption keys
802.1X support including LEAP to yield mutual
authentication and dynamic per-user, per-session
encryption keys
● Encryption
◦
Support for static and dynamic IEEE 802.11 WEP keys
of 40 bits and 128 bits
◦
Support for static and dynamic IEEE 802.11 WEP keys
of 40 bits and 128 bits
◦
WPA TKIP and Cisco TKIP enhancements: key hashing
(per packet keying), Message Integrity Check (MIC),
and broadcast key rotation
◦
WPA TKIP and Cisco TKIP enhancements: key hashing
(per packet keying), Message Integrity Check (MIC),
and broadcast key rotation
v1 and v2
v1 and v2
Cisco Aironet 1400 Series Wireless Bridge Product Specifications
Status LEDs
AIR-BR1410A-x-K9
AIR-BR1410A-A-K9-N
Power Injector LR
Four LEDs:
● Install
Four LEDs:
● Install
Four LEDs:
● Power ON
● Radio
● Status
● Radio
● Status
● Injector status
● LAN Ethernet status
● Ethernet
● Ethernet
● Bridge Ethernet status
RSSI port
BNC connector DC Voltage port (0VDC to
2.7 VDC)
BNC connector DC Voltage port (0VDC to
2.7 VDC)
—
Uplink
100 Mbps over dual coaxial cables
100 Mbps over dual coaxial cables
10/100BaseT Ethernet
Configuration
support
Telnet, HTTP, FTP, TFTP, SNMP
Telnet, HTTP, FTP, TFTP, SNMP
—
Compliance
Standards
● Safety:
Standards
● Safety:
Standards
● Safety:
◦
UL 60950
◦
UL 60950
◦
UL 60950
◦
CSA C22.2 No. 60950-00
◦
CSA C22.2 No. 60950-00
◦
CSA C22.2 No. 60950-00
◦
IEC 60950
◦
IEC 60950
◦
IEC 60950
◦
EN 60950
◦
EN 60950
◦
● Radio Approvals:
◦
NEMA 4
EN 60950
● EMI and Susceptibility (ClassB):
◦
FCC Part 15.207, 15.407 & 15.209 Class B
◦
FCC Part 15.107 & 15.109 Class B
◦
ICES-003 Class B (Canada)
◦
FCC Part 15.207, 15.407
◦
ICES-003 Class B (Canada)
◦
Canada DGTP-010
◦
& 15.209 Class B
◦
EN 55022 Class B
◦
FCC Bulletin OET-65C
◦
ICES-003 Class B (Canada)
◦
EN 55024
◦
Industry Canada RSS-102, RSP100, RSS
210 Issue 5
◦
Canada DGTP-010
◦
FCC Bulletin OET-65C
◦
Industry Canada RSS-102, RSP100,
RSS 210 Issue 5
● EMI and Susceptibility (Class B):
● Radio Approvals:
◦
FCC Part 15.107 & 15.109 Class B
◦
ICES-003 Class B (Canada)
◦
EN 55022 Class B
◦
FCC Part 15.107 & 15.109 Class B
◦
EN 55024
◦
ICES-003 Class B (Canada)
◦
EN 55022 Class B
◦
EN 55024
● EMI and Susceptibility (Class B):
Country
compliance
Customers are responsible for verifying approval for use in their country. Please see http://www.cisco.com/go/aironet/compliance to verify
approval and to identify the regulatory domain that corresponds to a particular country. Not all regulatory domains have been approved. As they
are approved, the part numbers will be available on the Global Price List.
Dimensions
11.4in x 11.4in x 4.2in (29cm x 29cm x 11cm)
Weight
11 lbs. (5 kg)
10 lbs. (5 kg)
1.4lbs. (0.6kg)
Operational
temperature
–30º to +55ºC (–22º to +131ºF)
–30º to +55ºC (–22º to +131ºF)
0º to +50ºC (32º to 122ºF)
Storage
temperature
–40º to +85ºC (–40º to +185ºF)
–40º to +85ºC (–40º to +185ºF)
–40º to +70ºC (–40º to +158ºF)
11.6in x 11.6in x 3.6in (29cm x 29cm x 9cm)
6.7in x 6.3in x 1.3in (17cm x 16cm x 3cm)
All contents are Copyright © 1992–2006 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 10 of 11
AIR-BR1410A-x-K9
AIR-BR1410A-A-K9-N
Power Injector LR
Operational
altitude
4206 m (13,800 ft.)
4206 m (13,800 ft.)
4206 m (13,800 ft.)
Storage
altitude
4877 m (16,000 ft.)
4877 m (16,000 ft.)
4877 m (16,000 ft.)
Humidity
0 to 100% (condensing)
0 to 100% (condensing)
0 to 90% (non-condensing)
Vibration
0.001 G2/Hz from 5–100 Hz
0.001 G2/Hz from 5–100 Hz
0.001 G2/Hz from 5–100 Hz
Storage
vibration
0.01 G2/Hz from 5–100 Hz
0.01 G2/Hz from 5–100 Hz
0.01 G2/Hz from 5–100 Hz
Enclosure
Aluminum with environmentally sealed plastic
radome
NEMA-4, aluminum
Metal case
AC power
Not Required as uses DC voltage from
Power Injector
Not Required as uses DC voltage from
Power Injector
100 to 240 VAC
DC power
48 VDC +/–2V
48 VDC +/–2V
48 VDC +/–2V
Warranty
One year
One year
One year
+/– 10% (power supply)
Printed in USA
All contents are Copyright © 1992–2006 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
C78-351377-00 05/06
Page 11 of 11