Cisco Catalyst 3560-E 24-Port Multi-Layer Ethernet Switch w/ PoE Data Sheet

Data Sheet

Cisco Catalyst 3560-E Series Switches

Cisco

®

Catalyst

®

3560-E Series is (Figure 1) an enterprise-class line of standalone access and aggregation switches that facilitate the deployment of secure converged applications while maximizing investment protection for evolving network and application requirements. Combining 10/100/1000 and Power over Ethernet (PoE) configurations with

10 Gigabit Ethernet uplinks, the Cisco Catalyst 3560-E Series access switches enhance worker productivity by enabling applications such as IP telephony, wireless, and video.

Cisco Catalyst 3560-E Series aggregation switches deliver secure non-stop unified network services and versatile connectivity in a one rack-unit (1-RU) form factor for space and power constrained environments, enabling businesses to reduce total cost of ownership while maximizing investment protection.

Cisco Catalyst 3560-E Series Primary Features

● Cisco TwinGig converter module for migrating uplinks from Gigabit Ethernet to 10 Gigabit

Ethernet

● PoE configurations with 15.4W of PoE on all 48 ports

●

Industry first portfolio to scale beyond 15.4W per port delivering maximum solution simplicity for 802.11n access point deployments

● Access switch models have modular fan and power supply with externally available backup

●

Dual redundant modular power supplies and fans for Cisco Catalyst 3560E-12D and

Catalyst 3560E-12SD aggregation switches for nonstop operation

● Multicast routing, IPv6 routing, and access control list (ACL) in hardware

● Out-of-band Ethernet management port along with RS-232 console port

Figure 1. Cisco Catalyst 3560-E Series Access and Aggregation Switches

All contents are Copyright © 1992–2008 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 1 of 24

Data Sheet

Switch Configurations

Table 1 shows the Cisco Catalyst 3560-E Series configurations:

Table 1. Switch Configurations.

Feature

Cisco Catalyst 3560E-24TD

Cisco Catalyst 3560E-24PD

Cisco Catalyst 3560E-48TD

Cisco Catalyst 3560E-48PD

Description

24 Ethernet 10/100/1000 ports and 2 X2 10 Gigabit Ethernet uplinks

24 Ethernet 10/100/1000 ports with PoE and 2 X2 10 Gigabit Ethernet uplinks

48 Ethernet 10/100/1000 ports and 2 X2 10 Gigabit Ethernet uplinks

48 Ethernet 10/100/1000 ports with PoE and 2 X2 10 Gigabit Ethernet uplinks

Cisco Catalyst 3560E-48PD-F 48 Ethernet 10/100/1000 ports with 15.4W PoE on all 48 ports and 2 X2 10 Gigabit Ethernet uplinks

Cisco Catalyst 3560E-12D

Cisco Catalyst 3560E-12SD

12 X2 10 Gigabit Ethernet ports

12 SFP Gigabit Ethernet ports and 2 X2 10 Gigabit Ethernet ports

Cisco Catalyst 3560-E Series Fixed Configuration Aggregation Switches

The Cisco Catalyst 3560E-12D, a 12-port 10 Gigabit Ethernet switch, and the Cisco Catalyst

3560E-12SD, a 12-port SFP Gigabit Ethernet switch with 2 10 Gigabit Ethernet uplink ports offer flexible and highly available aggregation solutions for nonstop unified network services. Dynamic routing, dual hot-swappable power supplies, and redundant field-replaceable fans enhance switch availability. Compatibility with the Cisco TwinGig module makes the Cisco Catalyst 3560-E Series aggregation switches ideal solutions for networks undergoing a gradual upgrade from Gigabit

Ethernet to 10 Gigabit Ethernet. This future-proofs the network for forthcoming business growth while reducing the total cost of ownership.

The Cisco Catalyst 3560E-12D and Catalyst 3560E-12D are well suited for space- and powerconstrained deployments because of the compact 1RU form factor, economical power needs and efficient cooling. Ideally suited to support secure converged applications such as Cisco

TelePresence and unified communications, the Cisco Catalyst 3560E-12D and Catalyst 3560E-

12SD deliver high-performance intelligent switching with the robust feature set.

Figure 2. Cisco Catalyst 3560E-12D and Cisco Catalyst 3560E-12SD Switch (Back)


Data Sheet

Cisco Catalyst 3560-E Software

The Cisco Catalyst 3560-E Series is available with either the IP Base or the IP Services feature set. The IP Base feature set includes advanced quality of service (QoS), rate-limiting, ACLs, and basic static and Routing Information Protocol (RIP) routing capability. The IP Services feature set provides a richer set of enterprise-class features, including advanced hardware-based IP unicast and multicast routing (Enhanced Interior Gateway Routing Protocol [EIGRP], Open Shortest Path

First [OSPF], Border Gateway Protocol [BGP], Protocol Independent Multicast [PIM], and so on).

An additional Advanced IP Services feature set is also available which is required for IPv6 routing.

Customers can transparently upgrade the software feature set in the Cisco Catalyst 3560-E Series

Switches through Cisco IOS

®

Software Activation. Software activation authorizes and enables the

Cisco IOS Software feature sets. A special file contained in the switch, called a license file, is examined by Cisco IOS Software when the switch is powered on. Based on the license’s type,

Cisco IOS Software activates the appropriate feature set. License types can be changed or upgraded to activate a different feature set.

10 Gigabit Ethernet Uplinks and the Cisco TwinGig Small Form-Factor Pluggable

Converter

The Cisco Catalyst 3560-E features wire-speed 10 Gigabit Ethernet uplink ports for high-bandwidth applications relieving congestion and helping ensure smooth delivery of data. The TwinGig converter (see Figure 3) converts a 10 Gigabit Ethernet X2 interface into two Gigabit Ethernet

Small Form-Factor Pluggable (SFP) ports. This way, customers can initially use the switch with

Gigabit Ethernet uplinks and later implement 10 Gigabit Ethernet uplinks as business demands change, without having to upgrade the access layer.

Figure 3. Cisco TwinGig Adapter Converting 10 Gigabit Ethernet X2 Interface into Two Gigabit Ethernet

SFP Interfaces


Data Sheet

Modular Power Supplies

The Cisco Catalyst 3560-E Series access switches have one power supply slot and support the following power supplies. PoE switches require a PoE power supply. Data-only switches can operate with any of the power supplies:

● C3K-PWR-1150WAC: 1150WAC power supply with 740W PoE

●

C3K-PWR-750WAC: 750WAC power supply for 24-port switch with 370W PoE

● C3K-PWR-265WAC: 265WAC power supply for 48- or 24-port switch without PoE

●

C3K-PWR-265WDC: 265WDC power supply for 48- or 24-port switch without PoE

Maximum power availability for converged voice and data networks is attainable when a Cisco

Catalyst 3560-E Series Switch is combined with the Cisco Redundant Power System 2300 (Cisco

RPS 2300) for transparent protection against internal power supply failures and an uninterruptible power supply (UPS) system to safeguard against power outages. Using the Cisco RPS 2300 to provide backup power, the Cisco Catalyst 3560-E Series Switch power supplies become hot swappable. Table 4 shows the power supply compatibility matrix.

The Cisco Catalyst 3560E-12D and the Cisco Catalyst 3560E-12SD aggregation switches have dual redundant power supplies that can be replaced, one at a time, without service interruption.

Customers can choose from AC, DC, and mixed power supply options:

●

C3K-PWR-300WAC: Cisco Catalyst 3560E-12D and 3560E-12SD 300WAC power supply

● C3K-PWR-300WDC: Cisco Catalyst 3560E-12D and 3560E-12SD 300WDC power supply

Power over Ethernet

The Cisco Catalyst 3560-E Series can provide a lower total cost of ownership for deployments that incorporate Cisco IP phones, Cisco Aironet

®

wireless LAN (WLAN) access points, or any IEEE

802.3af-compliant end device. PoE removes the need for wall power to each PoE-enabled device and eliminates the cost for additional electrical cabling and circuits that would otherwise be necessary in IP phone and WLAN deployments. The Cisco Catalyst 3560-E 24-port PoE configurations can support 24 simultaneous full-powered PoE ports at 15.4W for maximum powered-device support. The Cisco Catalyst 3560-E 48-port PoE configurations can support 48 simultaneous full-powered PoE ports at 15.4W when using the optional 1150W power supply.

Alternatively, for deployments that do not need maximum power, a smaller power supply makes use of Cisco Catalyst Intelligent Power Management to support 24 ports at 15.4W, 48 ports at

7.7W, or any combination in between.

The Cisco Catalyst 3560-E Series also features Enhanced Power over Ethernet support, the capability to power a growing number of devices from a single switch port, enabling greater operational simplicity and flexibility for secure converged networks. Industry first portfolio to scale beyond 15.4W per port delivering maximum solution simplicity for 802.11n access point deployments, as well as other PoE-powered devices such as phones, monitors, digital signs, medical devices, card readers and more.


Data Sheet

Redundant Power System

The Cisco Catalyst 3560-E Series access switches support the new generation of Cisco RPS

2300, which increases availability in a converged data, voice, and video network by providing transparent power backup to two of six attached Cisco Catalyst 3560-E Series Switches at the same time. The failed power supply can be swapped out while the switch is being powered up by the Cisco RPS 2300. The Cisco Catalyst 3560E-12D and 3560E-12SD aggregation switches don’t support the RPS, they provide redundancy and switch uptime with dual redundant modular power supplies.

Primary Features and Benefits

Ease of Use: Deployment

The Cisco Catalyst 3560-E offers ease of use features such as Cisco Smartports, which enable fast and easy configuration of advanced Cisco Catalyst intelligent capabilities, encapsulating years of Cisco networking expertise. Cisco Smartports macros offer a set of verified feature templates per connection type that are easy to apply, enabling users to consistently and reliably configure essential security, IP telephony, availability, QoS, and manageability features with minimal effort and expertise.

Other ease of use features include:

●

Dynamic Host Configuration Protocol (DHCP) autoconfiguration of multiple switches through a boot server eases switch deployment.

● Automatic QoS (AutoQoS) simplifies QoS configuration in voice-over-IP (VoIP) networks by issuing interface and global switch commands to detect Cisco IP phones, classify traffic, and help enable egress queue configuration.

● Autonegotiation on all ports automatically selects half- or full-duplex transmission mode to optimize bandwidth.

●

Dynamic Trunking Protocol (DTP) facilitates dynamic trunk configuration across all switch ports.

● Port Aggregation Protocol (PAgP) automates the creation of Cisco Fast EtherChannel

® groups or Gigabit EtherChannel groups to link to another switch, router, or server.

● Link Aggregation Control Protocol (LACP) allows the creation of Ethernet channeling with devices that conform to IEEE 802.3ad. This feature is similar to Cisco EtherChannel technology and PAgP.

●

Automatic media-dependent interface crossover (MDIX) automatically adjusts transmit and receive pairs if an incorrect cable type (crossover or straight-through) is installed.

● Unidirectional Link Detection Protocol (UDLD) and Aggressive UDLD allow unidirectional links caused by incorrect fiber-optic wiring or port faults to be detected and disabled on fiber-optic interfaces.

Availability and Scalability

The Cisco Catalyst 3560-E Series is equipped with a robust set of features that allow for network scalability and higher availability. This is achieved through IP routing as well as a complete suite of

Spanning Tree Protocol enhancements aimed to maximize availability in a Layer 2 network.

Enhancements to the standard Spanning Tree Protocol, such as Per-VLAN Spanning Tree Plus


Data Sheet

(PVST+), Uplink Fast, and Port Fast, as well as innovations such as Flexlink, maximize network uptime.

● Flexlink provides link redundancy with convergence time less than 100ms without Spanning

Tree Protocol. A pair of interfaces configured as primary and backup links can load balance traffic based on VLAN. IEEE 802.1s/w Rapid Spanning Tree Protocol (RSTP) and Multiple

Spanning Tree Protocol (MSTP) provide rapid spanning-tree convergence independent of spanning-tree timers and also offer the benefit of Layer 2 load balancing and distributed processing.

● Per-VLAN Rapid Spanning Tree (PVRST+) allows rapid spanning-tree reconvergence on a per-VLAN spanning-tree basis, without requiring the implementation of spanning-tree instances.

● Cisco Hot Standby Router Protocol (HSRP) is supported to create redundant, failsafe routing topologies.

●

Switch-port Autorecovery (Errdisable) automatically attempts to reactivate a link that is disabled because of a network error.

High-Performance IP Routing

Cisco Express Forwarding hardware routing architecture delivers extremely high-performance IP routing in the Cisco Catalyst 3560-E Series Switches.

● Basic IP unicast routing protocols (Static, Routing Information Protocol Version 1 [RIPv1], and RIPv2) are supported for small-network routing applications.

● Advanced IP unicast routing protocols (OSPF, EIGRP, and BGPv4) are supported for load balancing and constructing scalable LANs. The IP Services feature set is required.

●

IPv6 routing (RIPng, OSPFv3) is supported in hardware for maximum performance.

Advanced IP Services feature set is required for IPv6 routing.

● Equal-cost routing facilitates Layer 3 load balancing and redundancy.

●

Policy-based routing (PBR) allows superior control by facilitating flow redirection regardless of the routing protocol configured. The IP Services feature set is required.

● HSRP provides dynamic load balancing and failover for routed links, up to 32 unique HSRP links supported per unit. The group number can be reused for each VLAN configured in the switch.

● Protocol Independent Multicast (PIM) for IP multicast routing is supported, including PIM sparse mode (PIM-SM), Source Specific Multicast (SSM), PIM dense mode (PIM-DM), and

PIM sparse-dense mode. The IP Services feature set is required.

●

Web Control Caching Protocol (WCCPv2) enables Wide Area Acceleration Services

(WAAS), resulting in improved application response time and conservation of WAN bandwidth.

●

Fallback bridging forwards non-IP traffic between two or more VLANs. The IP Services feature set is required.

Superior Quality of Service

The Cisco Catalyst 3560-E Series offers Gigabit Ethernet speed with intelligent services that keep everything flowing smoothly, even at 10 times the normal network speed. Industry-leading


Data Sheet mechanisms for marking, classification, and scheduling deliver superior performance for data, voice, and video traffic, all at wire speed.

Following are some of the QoS features supported in the Cisco Catalyst 3560-E Series Switches:

● 802.1p class of service (CoS) and differentiated services code point (DSCP) field classification is provided, using marking and reclassification on a per-packet basis by source and destination IP address, MAC address, or Layer 4 TCP/UDP port number.

●

Cisco control-plane and data-plane QoS ACLs on all ports help ensure proper marking on a per-packet basis.

● Four egress queues per port help enable differentiated management of up to four traffic types across the switch.

●

Shaped Round Robin (SRR) scheduling helps ensure differential prioritization of packet flows by intelligently servicing the ingress queues and egress queues.

●

Weighted Tail Drop (WTD) provides congestion avoidance at the ingress and egress queues before a disruption occurs.

● Strict priority queuing helps ensure that the highest-priority packets are serviced ahead of all other traffic.

●

The Cisco committed information rate (CIR) function provides bandwidth in increments as low as 8 Kbps.

● Rate limiting is provided based on source and destination IP address, source and destination MAC address, Layer 4 TCP/UDP information, or any combination of these fields, using QoS ACLs (IP ACLs or MAC ACLs), class maps, and policy maps.

● Up to 64 aggregate or individual policers are available per Fast Ethernet or Gigabit Ethernet port.

Advanced Security

The Cisco Catalyst 3560-E Series supports a comprehensive set of security features for connectivity and access control, including ACLs, authentication, port-level security, and identitybased network services with 802.1x and extensions. This set of comprehensive features not only helps prevent external attacks, but defends the network against “man-in-the-middle” attacks, a primary concern in today’s business environment. The switch also supports the Network

Admission Control (NAC) security framework.

● DHCP Snooping prevents malicious users from spoofing a DHCP server and sending out invalid addresses. This feature is used by other primary security features to prevent a number of other attacks such as ARP poisoning.

●

Dynamic ARP Inspection (DAI) helps ensure user integrity by preventing malicious users from exploiting the insecure nature of the ARP protocol.

● IP source guard prevents a malicious user from spoofing or taking over another user’s IP address by creating a binding table between the client’s IP and MAC address, port, and

VLAN.

● Private VLANs restrict traffic between hosts in a common segment by segregating traffic at

Layer 2, turning a broadcast segment into a nonbroadcast multi-access-like segment.

●

Private VLAN Edge provides security and isolation between switch ports, which helps ensure that users cannot snoop on other users’ traffic.


Data Sheet

●

Unicast RPF feature helps mitigate problems caused by the introduction of malformed or forged (spoofed) IP source addresses into a network by discarding IP packets that lack a verifiable IP source address.

●

IEEE 802.1x allows dynamic, port-based security, providing user authentication.

● IEEE 802.1x with VLAN assignment allows a dynamic VLAN assignment for a specific user regardless of where the user is connected.

●

IEEE 802.1x with voice VLAN permits an IP phone to access the voice VLAN irrespective of the authorized or unauthorized state of the port.

● IEEE 802.1x and port security are provided to authenticate the port and manage network access for all MAC addresses, including that of the client.

● IEEE 802.1x with an ACL assignment allows for specific identity-based security policies regardless of where the user is connected.

●

IEEE 802.1x with guest VLAN allows guests without 802.1x clients to have limited network access on the guest VLAN.

● Web authentication for non-802.1x clients allows non-802.1x clients to use an SSL-based browser for authentication.

●

Multi-Domain Authentication allows an IP phone and a PC to authenticate on the same switch port while placing them on appropriate voice and data VLANs.

●

MAC Auth Bypass (MAB) for voice allows third-party IP phones without an 802.1x supplicant to get authenticated using their MAC address.

● Cisco security VLAN ACLs on all VLANs prevent unauthorized data flows from being bridged within VLANs.

●

Cisco standard and extended IP security router ACLs define security policies on routed interfaces for control-plane and data-plane traffic. IPv6 ACLs can be applied to filter IPv6 traffic.

● Port-based ACLs for Layer 2 interfaces allow security policies to be applied on individual switch ports.

● Secure Shell (SSH) Protocol, Kerberos, and Simple Network Management Protocol Version

3 (SNMPv3) provide network security by encrypting administrator traffic during Telnet and

SNMP sessions. SSH Protocol, Kerberos, and the cryptographic version of SNMPv3 require a special cryptographic software image because of U.S. export restrictions.

●

Bidirectional data support on the Switched Port Analyzer (SPAN) port allows the Cisco intrusion detection system (IDS) to take action when an intruder is detected.

● TACACS+ and RADIUS authentication facilitates centralized control of the switch and restricts unauthorized users from altering the configuration.

● MAC Address Notification allows administrators to be notified of users added to or removed from the network.

●

Port Security secures the access to an access or trunk port based on MAC address.

● Multilevel security on console access prevents unauthorized users from altering the switch configuration.

●

Bridge protocol data unit (BPDU) guard shuts down Spanning Tree PortFast-enabled interfaces when BPDUs are received to avoid accidental topology loops.


Data Sheet

●

Spanning Tree Root Guard (STRG) prevents edge devices not in the network administrator’s control from becoming Spanning Tree Protocol root nodes.

●

IGMP filtering provides multicast authentication by filtering out nonsubscribers and limits the number of concurrent multicast streams available per port.

● Dynamic VLAN assignment is supported through implementation of VLAN Membership

Policy Server client capability to provide flexibility in assigning ports to VLANs. Dynamic

VLAN facilitates the fast assignment of IP addresses.

Intelligent Power over Ethernet (PoE) Management

The Cisco Catalyst 3560-E PoE models support Cisco IP phones and Cisco Aironet wireless LAN

(WLAN) access points, as well as any IEEE 802.3af-compliant end device. The Cisco Catalyst

3560-E-48PD can support 48 simultaneous full-powered PoE ports at 15.4W with the 1150W power supply.

● Cisco Discovery Protocol version 2 allows the Cisco Catalyst 3560-E Series Switch to negotiate a more granular power setting when connecting to a Cisco powered device, such as IP phones or access points, than what is provided by IEEE classification.

●

Per Port power consumption command allows customer to specify maximum power setting on an individual port.

● Per Port PoE Power Sensing measures actual power being drawn, enabling more intelligent control of powered devices.

● The PoE MIB provides proactive visibility into power usage and allows customers to set different power level thresholds

●

Link Layer Discovery Protocol (LLDP and LLDP-MED) adds support for IEEE 802.1AB link layer discovery protocol for interoperability in multivendor networks. Switches exchange speed, duplex, and power settings with end devices such as IP phones.

Management and Control Features

The Cisco Catalyst 3560-E Series Switches come with a rich set of management and control features that include:

● Cisco IOS Software CLI support provides common user interface and command set with all

Cisco routers and Cisco Catalyst desktop switches.

● Generic On-Line Diagnostics (GOLD) checks the health of hardware components and verifies proper operation of the system data and control plane at run time and boot time.

●

Virtual Route Forwarding (VRF)-Lite enables a service provider to support two or more

VPNs with overlapping IP addresses.

● Switching Database Manager Templates for access, routing, and VLAN deployment allow the administrator to easily maximize memory allocation to the desired features based on deployment-specific requirements.

● With Cisco IOS Software IP SLAs, users can verify service guarantees, increase network reliability by validating network performance, proactively identify network issues, and increase return on investment (ROI) by easing the deployment of new IP services.

●

Local Proxy Address Resolution Protocol (ARP) works in conjunction with Private VLAN

Edge to minimize broadcasts and maximize available bandwidth.

● VLAN1 minimization allows VLAN1 to be disabled on any individual VLAN trunk.


Data Sheet

●

Internet Group Management Protocol (IGMP) Snooping for IPv4 and IPv6 MLD v1 and v2

Snooping provide fast client joins and leaves of multicast streams and limit bandwidthintensive video traffic to only the requestors.

●

Multicast VLAN Registration (MVR) continuously sends multicast streams in a multicast

VLAN while isolating the streams from subscriber VLANs for bandwidth and security reasons.

● Per-port broadcast, multicast, and unicast storm control prevents faulty end stations from degrading overall systems performance.

●

Voice VLAN simplifies telephony installations by keeping voice traffic on a separate VLAN for easier administration and troubleshooting.

●

Cisco VLAN Trunking Protocol (VTP) supports dynamic VLANs and dynamic trunk configuration across all switches.

● Remote Switch Port Analyzer (RSPAN) allows administrators to remotely monitor ports in a

Layer 2 switch network from any other switch in the same network.

●

For enhanced traffic management, monitoring, and analysis, the Embedded Remote

Monitoring (RMON) software agent supports four RMON groups (history, statistics, alarms, and events).

● Layer 2 traceroute eases troubleshooting by identifying the physical path that a packet takes from source to destination.

● Trivial File Transfer Protocol (TFTP) reduces the cost of administering software upgrades by downloading from a centralized location.

●

Network Timing Protocol (NTP) provides an accurate and consistent timestamp to all intranet switches.

● Multifunction LEDs per port for port status; half-duplex and full-duplex mode; and 10BASE-

T, 100BASE-TX, and 1000BASE-T indication as well as switch-level status LEDs for system, redundant-power supply, and bandwidth utilization provide a comprehensive and convenient visual management system.

● Jumbo frames (9216 bytes) are available on the 10/100/1000 configurations for advanced data and video applications requiring very large frames.

Network Management Tools

The Cisco Catalyst 3560-E Series offers both a superior command-line interface (CLI) for detailed configuration and Cisco Network Assistant software, a PC-based tool for quick configuration based on preset templates. In addition, CiscoWorks LAN Management Solution (LMS) supports the Cisco

Catalyst 3560-E Series for networkwide management.

Cisco Network Assistant

A PC-based network management application designed for small and medium-sized business

(SMB) networks with up to 250 users, Cisco Network Assistant offers centralized network management and configuration capabilities. Cisco Network Assistant uses Cisco Smartports technology to simplify both initial deployment and ongoing maintenance. This application also features an intuitive GUI where users can easily apply common services across Cisco switches, routers, and access points, such as:

● Configuration management

●

Troubleshooting advice


Data Sheet

●

Inventory reports

● Event notification

● Network security settings

●

Password synchronization

● Drag-and-drop Cisco IOS Software upgrades

●

Secure wireless

For detailed information about Cisco Network Assistant, go to: http://www.cisco.com/go/cna .

CiscoWorks LAN Management Solution (LMS)

CiscoWorks LMS is a suite of powerful management tools that simplify the configuration, administration, monitoring, and troubleshooting of Cisco networks. It integrates these capabilities into a world-class solution for improving the accuracy and efficiency of your operations staff, while increasing the overall availability of your network. LMS supports over 400 different device types, including the Cisco Catalyst 3560-E Series Switches, and it provides:

● Network discovery, topology views, end-station tracking, and VLAN management

●

Real-time network fault analysis with easy-to-deploy device-specific best-practice templates

● Hardware and software inventory management, centralized configuration tools, and Syslog monitoring

● Network response time and availability monitoring and tracking

●

Real-time device, link, and port traffic management, analysis, and reporting

● For detailed information about CiscoWorks LMS, go to: http://www.cisco.com/en/US/products/sw/cscowork/ps2425/index.html

.


Data Sheet

Product Specifications

Table 2 lists product specifications for the Cisco Catalyst 3560-E Series.

Table 2. Descriptions and Specifications

Description

Performance

Connectors and Cabling

Specification

Switching Fabric

DRAM

FLASH

VLANs

VLAN IDs

Switched Virtual Interfaces (SVIs)

128 Gbps

128 MB / 256 MB *

64 MB

1K

4K

1K

9216 Byte Jumbo Frames

Forwarding rate:

3560E-24TD

3560E-24PD

3560E-48TD

3560E-48PD

3560E-48PD-F

65.5 Mpps

65.5 Mpps

101.2 Mpps

101.2 Mpps

101.2 Mpps

3560E-12D

3560E-12SD

90 Mpps

47.6 Mpps

MAC, routing, security, and QoS scalability numbers depend on the type of template used in the switch:

Default

Template

Access

Template

MAC address 6K

1K IGMP groups and multicast routes

Total unicast routes

8K / 12K *

VLAN

Template

4K / 6K *

1K

6K / 12K *

Routing

Template

12K

1K

0

Default

Template

3K / 6K *

1K

11K / 20K *

Directly connected hosts

6K

Indirect routes 2K / 6K *

Security ACEs

QoS ACEs

1K

0.5K / 0.8K *

4K / 6K *

2K / 6K *

2K / 4K *

0.5K / 0.8K *

0

0

1K

0.5K / 0.8K *

3K / 6K *

8K / 14K *

1K

0.5K

PBR ACEs 0 0.5K 0 0.5K

* Specific to the Cisco Catalyst 3560E-12D only

● 1000BASE-T ports: RJ-45 connectors, 2-pair Cat-5 UTP cabling

● 1000BASE-T SFP-based ports: RJ-45 connectors, 2-pair Cat-5 UTP cabling

● 100BASE-FX, 1000BASE-SX, -LX/LH, -ZX, -BX10 and CWDM SFP-based ports: LC fiber connectors (single-mode, or multimode fiber)

● 10GBASE-SR, LR, ER, CX4, LX4, LRM X2-based ports: SC fiber connectors (singlemode, or multimode fiber)

● Ethernet management port: RJ-45 connectors, 2-pair Cat-5 UTP cabling

● Management console port: RJ-45-to-DB9 cable for PC connections


Data Sheet

Power Connectors

Indicators

Dimensions (H x W x D)

Weight

Environmental Ranges

Acoustic Noise

Mean Time Between Failure

(MTBF)

● Customers can provide power to an access switch by using either the internal power supply or the Cisco RPS 2300. The connectors are located at the back of the switch.

● The Cisco Catalyst 3560E-12D and Catalyst 3560E-12SD have dual power supplies and do not support the RPS.

● Internal power supply connector: The internal power supply is an autoranging unit. The internal power supply supports input voltages between 100 and 240VAC. Use the supplied AC power cord to connect the AC power connector to an AC power outlet.

● Cisco RPS connector: The connector offers connection for an optional Cisco RPS 2300 that uses AC input and supplies DC output to the switch.

● Only the Cisco RPS 2300 (model PWR-RPS2300) should be attached to the redundantpower-supply receptacle.

● Per-port status LEDs: link integrity, disabled, activity, speed, and full-duplex indications

● System-status LEDs: system, RPS, and bandwidth-utilization indications (on the Cisco

Catalyst 3560E-12D and 3560E-12SD only: system, power supplies, fans)

3560E-24TD

Inches

1.75 x 17.5 x 18.1

Centimeters

4.45 x 44.5 x 46.0

3560E-24PD

3560E-48TD

3560E-48PD

1.75 x 17.5 x 18.1

1.75 x 17.5 x 18.1

1.75 x 17.5 x 18.1

4.45 x 44.5 x 46.0

4.45 x 44.5 x 46.0

4.45 x 44.5 x 46.0

3560E-48PD-F

3560E-12D

3560E-12SD

3560E-24TD

3560E-24PD

3560E-48TD

3560E-48PD

3560E-48PD-F

1.75 x 17.5 x 21.7

1.75 x 17.5 x 19.5

1.75 x 17.5 x 15

Pounds

17.9

18.3

18.8

19.2

20.9

4.45 x 44.5 x 55.2

4.45 x 44.5 x 49.5

4.45 x 44.5 x 38.1

Kilograms

8.1

8.3

8.6

8.75

9.5

3560E-12D 23.5 10.7

3560E-12SD 16 7.27

● Operating temperature: 32 to 113ºF (0 to 45ºC)

● Storage temperature: –13 to 158ºF (–25 to 70ºC)

● Relative humidity operating: 0 to 95% (noncondensing)

● Relative humidity nonoperating: 10 to 85% (noncondensing)

● Operating altitude: up to 10,000 ft (3049 m)

● Storage altitude: up to 15,000 ft (4573 m)

● Cisco Catalyst 3560E-12D and Catalyst 3560E-12SD: up to 50,000 feet over allowable temperature range; NEBS - up to 13,000 feet [4000 m]

International Organization for Standardization (ISO) 7779: bystander position operating to an ambient temperature of 30ºC

3560E-24TD 45 dB

3560E-48TD

3560E-24PD

3560E-48PD

3560E-48PD-F

3560E-12D

3560E-12SD

45 dB

45 dB

45 dB

48 dB

44 dB

44 dB

3560E-24TD

3560E-24PD

3560E-48TD

3560E-48PD

3560E-48PD-F

3560E-12D

181,086 hours

168,753 hours

166,907 hours

151,196 hours

151,196 hours

147,001 hours


Data Sheet

3560E-12SD 206,950 hours

Table 3 lists the management and standards support for the Cisco Catalyst 3560-E Series.

Table 3. Management and Standards Support for Cisco Catalyst 3560-E Series Switches

Description

Management

Standards

Specification

● BRIDGE-MIB

● CISCO-CDP-MIB

● CISCO-CLUSTER-MIB

● CISCO-CONFIG-MAN-MIB

● CISCO-ENTITY-FRU-CONTROL-MIB

● CISCO-ENVMON-MIB

● CISCO-FLASH-MIB

● CISCO-FTP-CLIENT-MIB

● CISCO-HSRP-MIB

● CISCO-HSRP-EXT-MIB

● CISCO-IGMP-FILTER-MIB

● CISCO-IMAGE-MIB

● CISCO-IP-STAT-MIB

● CISCO-L2L3-INTERFACE-CONFIG-MIB

● CISCO-POE-EXTENSIONS-MIB

● CISCO-MAC-NOTIFICATION-MIB

● CISCO-MEMORY-POOL-MIB

● CISCO-PAGP-MIB

● CISCO-PING-MIB

● CISCO-PROCESS-MIB

● CISCO-RTTMON-MIB

● CISCO-STP-EXTENSIONS-MIB

● CISCO-SYSLOG-MIB

● CISCO-TCP-MIB

● CISCO-VLAN-IFTABLE-RELATIONSHIP-MIB

● CISCO-VLAN-MEMBERSHIP-MIB

● IEEE 802.1s

● IEEE 802.1w

● IEEE 802.1x

● IEEE 802.3ad

● IEEE 802.3af

● IEEE 802.3x full duplex on 10BASE-T,

100BASE-TX, and 1000BASE-T ports

● IEEE 802.1D Spanning Tree Protocol

● IEEE 802.1p CoS Prioritization

● IEEE 802.1Q VLAN

● IEEE 802.3 10BASE-T specification

● IEEE 802.3u 100BASE-TX specification

● IEEE 802.3ab 1000BASE-T specification

● IEEE 802.3z 1000BASE-X specification

● 100BASE-FX

● 1000BASE-T

● 1000BASE-SX

● CISCO-VTP-MIB

● ENTITY-MIB

● ETHERLIKE-MIB

● IF-MIB

● IGMP-MIB

● IPMROUTE-MIB

● OLD-CISCO-CHASSIS-MIB

● OLD-CISCO-FLASH-MIB

● OLD-CISCO-INTERFACES-MIB

● OLD-CISCO-IP-MIB

● OLD-CISCO-SYS-MIB

● OLD-CISCO-TCP-MIB

● OLD-CISCO-TS-MIB

● OSPF-MIB (RFC 1253)

● PIM-MIB

● RFC1213-MIB

● RFC1253-MIB

● RMON-MIB

● RMON2-MIB

● SNMP-FRAMEWORK-MIB

● SNMP-MPD-MIB

● SNMP-NOTIFICATION-MIB

● SNMP-TARGET-MIB

● SNMPv2-MIB

● TCP-MIB

● UDP-MIB

● 1000BASE-LX/LH

● 1000BASE-BX10-U

● 1000BASE-BX10-D

● 1000BASE-ZX

● 1000BASE-CWDM SFP 1470 nm








● 10GBASE-SR

● 10GBASE-LR

● 10GBASE-ER

● RMON I and II standards

● SNMPv1, SNMPv2c, and SNMPv3


Data Sheet

Table 4 lists the power supply compatibility matrix for all different models of Cisco Catalyst 3560-E

Series Switches.

Table 4. Power Supply Compatibility Matrix

Cisco Catalyst 3560-E

Series Switch Type

48-Port PoE Switch

24-Port PoE Switch

48-Port Switch

24-Port Switch

Cisco RPS 2300

Cisco Catalyst

3560E-12D

Cisco Catalyst

3560E-12SD

X

X

X

X

–

Power Supply

C3K-PWR-

1150WAC

X

C3K-PWR-

750WAC

X

X

X

X

X

–

– –

X

–

–

C3K-PWR-

265WAC

–

–

X

–

X

–

–

C3K-PWR-

265WDC

–

–

X

–

–

–

X

–

–

C3K-PWR-

300WAC

–

X

–

–

X

–

–

C3K-PWR-

300WDC

–

X

Table 5 lists the power specifications for the Cisco Catalyst 3560-E Series based on the kind of power supply used.

Table 5. Power Specifications

Description

Max Output Power

Specifications

C3K-PWR-

1150WAC

1150W

C3K-PWR-

750WAC

750W

C3K-PWR-

265WAC

265W

C3K-PWR-

265WDC

265W

C3K-PWR-

300WAC

300W

Input-Voltage Range and

Frequency

Input Current

Output Ratings

115–240VAC,

50–60 Hz

100–240VAC,

50–60 Hz

12-6A 10-5A

100–240VAC,

50–60 Hz

5-2.5A

12V@22A

-36VDC to -

72VDC

85–265VAC,

47–63 Hz

<5A@-72VDC

<10A@-

36VDC

4-2A

12V@22A 12V@25A

Output Holdup Time

Power-Supply Input

Receptacles

Power Cord Rating

12V@25A

[email protected]

20 ms minimum

IEC 320-C14

(IEC60320-

C14)

15A

12V@25A

[email protected]

20 ms minimum

IEC 320-C14

(IEC60320-

C14)

15A

20 ms minimum

IEC 320-C13

(IEC60320-

C14)

15A

> 2ms@-

48VDC

–

12A@-

100VDC

20 ms minimum

IEC 320-C13

(IEC60320-

C14)

10A

C3K-PWR-

300WDC

300W

-40.5VDC to -

72VDC

8A

12V@25A

8ms

–

12AWG


Data Sheet

Table 6 lists the specifications of all the power supplies supported in Cisco Catalyst 3560-E Series

Switches.

Table 6. Power Supply Specifications

Product Specifications

C3K-PWR-

1150WAC

C3K-PWR-

750WAC

C3K-PWR-

265WAC

C3K-PWR-

265WDC

C3K-PWR-

300WAC

C3K-PWR-

300WDC

Physical Specifications (H x W x D):

1.65 X 6.0 X

14.90 in

Weight: 5.6 lb

(2.6 kg)

(H x W x D):

1.65 X 6.0 X

11.4 in

Weight: 3.9 lb

(1.8 kg)

(H x W x D):

1.65 X 6.0 X

11.4 in

Weight: 3.3 lb

(1.5 kg)

(H x W x D):

1.65 X 6.0 X

11.4 in

Weight: 3.5 lb

(1.6 kg)

(H x W x D):

1.58 X 4.0 x 9.0 in

Weight: (2 Kg)

Total Output BTU (Note:

1000 BTU/hr = 290W)

Power Supply

3939 BTU/hr,

1150W

2568 BTU/hr,

765W

Operating Temperature 23 to 113°F (-5 to 45°C)

907 BTU/hr,

265W

907 BTU/hr,

265W

1034 BTU/hr, 300W

Storage Temperature

Relative Humidity

Operating,

-40 to 158°F (-40 to 70°C)

10 to 85% noncondensing

23 to 131°F (-5 to 55°C)

-40 to 185°F (-40 to 85°C)

10 to 90% noncondensing

Relative Humidity

Nonoperating,

Altitude

0 to 95% noncondensing 5 to 95% noncondensing

MTBF

EMI and EMC

Compliance

Safety Compliance

LED Indicators

10,000 ft. (3000 meters), up to 45°C Operating: -500 to 10,000 ft.

(-152 to 3048 m) over allowable temperature range

Nonoperating: -1,000 to 50,000 ft. (-304 to 15,240 m) over allowable temperature range

Calculated MTBF must be greater than 300,000 hrs using

Telcordia SR-332, Method 1, Case 3. Demonstrated MTBF is

500,000 hrs (with 90% confidence level).

Calculated

MTBF 220,000 hrs with fan

(MIL HDBK

217F formula).

Demonstrated

MTBF 150,000 hrs with 90% confidence.

● FCC Part 15 (CFR 47) Class A

● ICES-003 Class A

● EN 55022 Class A

● CISPR 22 Class A

● AS/NZS 3548 Class A

● VCCI Class A

● EN 55024

● EN300 386

● EN 50082-1

● EN 61000-3-2

● EN 61000-3-3

● EN 61000-6-1

NEBS Compliant (Except C3K-PWR-1150WAC and C3K-PWR-750WAC)

Calculated

MTBF 662,000 hrs with fan

(Bellcore formula).

Demonstrated

MTBF 150,000 hrs with 90% confidence.

● UL 60950-1 1st Edition

● CAN/CSA-C22.2 No. 60950-1 1st Edition

● EN 60950-1 1st Edition

● IEC 60950-1 1st Edition

● “AC OK” or “DC IN”: Input power to the power supply is

OK.

● “PS OK”: Output power from the power supply is OK.

●

●

“AC OK”: Input power to the power supply is OK.

“PS OK”: Output power from the power supply is OK.


Data Sheet

Table 7 lists the safety and compliance information for the Cisco Catalyst 3560-E Series.

Table 7. Safety and Compliance

Description

Safety Certifications

Electromagnetic Emissions

Certifications

NEBS

ETSI

Environmental

Noise Specifications

Telco

Warranty

Specification

● UL60950-1

● C-UL to CAN/CSA 22.2 No.60950-1

● TUV/GS to EN 60950-1

● CB to IEC 60950-1 with all country deviations

● CE Marking

● CCC for PS FRU

● FCC Part 15 Class A

● EN 55022 Class A (CISPR22 Class A)

● CNS13438 Class A (applicable only to FRU power supplies)

● AS/NZS CISPR22 Class A

● EN55024

● GR-1089 CORE Class A

● EN 300 368

● MIC

● CE Marking

● China (applicable only to FRU power supplies)

● GR-63-CORE, GR-1089-CORE

● Level 3 Type 2, 4 and Wall Mount

● AT&T TP76200 Checklist

● TCG NEBS Checklist

EN 300 019 - Storage: Class 1.2, Transportation: Class 2.3, In-Use: Class 3.2

Reduction of Hazardous Substances (ROHS) 5

Office Product Spec: 48dBA at 30°C (refer to ISO 7779)

CLEI code

Standard 90 Day Limited Hardware and Software Warranty

Hardware Warranty

Cisco Catalyst 3560-E Series Switches come with the standard Cisco 90-day limited warranty for hardware and software, as described at: http://www.cisco.com/en/US/products/prod_warranties_item09186a00805f005b.html

.

Service and Support

Cisco and its partners can help you deploy a robust, dependable Cisco desktop switching solution by taking a lifecycle approach that addresses all aspects of deploying, operating, and optimizing a complex solution, including people, processes, and technology.

Whether you are migrating your existing Cisco desktop switching solution or deploying a new solution, this approach helps align business and technical goals throughout the solution lifecycle.

Upgrading from one Cisco IOS Software feature set (IP Base or IP Services) to another (IP

Services or Advanced IP Services) involves the software activation process described in this document. Customers must purchase a feature set-specific Cisco SMARTnet

®

Service contract to help ensure service coverage for newly activated Cisco IOS Software feature sets.


Data Sheet

Cisco and its partners are specialists in Cisco desktop switching products and technologies, business analysis, and project management. Cisco services are available through various service programs designed to help accelerate customer success throughout the network lifecycle. For more information about Cisco Services, see Cisco Technical Support Services or Cisco Advanced

Services .

Ordering Information

Table 8 lists ordering information for the Cisco Catalyst 3560-E Series. To place an order, visit the

Cisco ordering homepage at: http://www.cisco.com/en/US/ordering/or13/or8/order_customer_help_how_to_order_listing.html

.

Table 8. Cisco Catalyst 3560-E Series Ordering Info

Cisco Catalyst 3560-E Series

Product Number

WS-C3560E-24TD-S

WS-C3560E-24TD-E

WS-C3560E-48TD-S

WS-C3560E-48TD-E

WS-C3560E-24PD-S

WS-C3560E-24PD-E

Product Description

● 24 10/100/1000 ports + 2 X2-based 10 Gigabit Ethernet ports

● 68-Gbps, wire rate backplane

● Field-replaceable 265WAC power supply and fan tray

● 1 rack unit (RU) fixed configuration multilayer switch

● IPv6

● IP Base software feature set (IPB)




● 1-RU fixed configuration multilayer switch

● IPv6

● IP Services software feature set (IPS)

● Provides full IPv4 dynamic routing





● IPv6






● IPv6



● 24 10/100/1000 PoE ports + 2 X2-based 10 Gigabit Ethernet ports



● 370W available for PoE, allowing full 15.4W to all ports


● IPv6





● 370W available for PoE, allowing full 15.4W to all ports


● IPv6




Data Sheet

WS-C3560E-48PD-S

WS-C3560E-48PD-E

WS-C3560E-48PD-SF

WS-C3560E-48PD-EF

WS-C3560E-12D-S

WS-C3560E-12D-E

WS-C3560E-12SD-S

WS-C3560E-12SD-E




● 370W available for PoE allowing full 15.4W for up to 24 ports


● IPv6





● 370W available for PoE allowing full 15.4W for up to 24 ports


● IPv6






● 740W available for PoE, allowing full 15.4W to all 48 ports


● IPv6





● 740W available for PoE, allowing full 15.4W to all 48 ports


● IPv6



● 12 X2-based 10 Gigabit Ethernet ports

● 60 Gbps, backplane utilization 2:1 oversubscribed

● Dual hot-swappable 300WAC or DC power supplies and redundant fans


● IPv6


● 12 X2-based 10 Gigabit Ethernet ports

● 60 Gbps, backplane utilization 2:1 oversubscribed

● Dual hot-swappable 300WAC or DC power supplies and redundant fans


● IPv6



● 12 SFP based Gigabit Ethernet ports + 2 X2-based 10 Gigabit Ethernet ports

● 68 Gbps, wire rate backplane

● Dual hot-swappable 300WAC or DC power supplies and redundant field-replaceable fans


● IPv6


● 12 SFP based Gigabit Ethernet ports + 2 X2-based 10 Gigabit Ethernet ports

● 68 Gbps, wire rate backplane

● Dual hot-swappable 300WAC or DC power supplies and redundant field-replaceable fans


● IPv6



Cisco Catalyst 3560-E Series Product Activation Keys


Data Sheet

3560E-LIC=

Cisco Catalyst 3560-E Series Product Activation Keys Configurations

3560E-IPSLCB-QTY

3560E-AISK9LCBQTY

IP Services for 3560-E, upgrade from the IP Base Feature Set

Advanced IP Services for 3560-E, upgrade from IP Base

3560E-AISK9LCSQTY

3560E12D-AK9LB-QTY

3560E12D-AK9LS-QTY

3560E12D-SLB-QTY

Advanced IP Services for 3560-E, upgrade from IP Services

Advanced IP Services for 3560E-12D, upgrade from IP Base

Advanced IP Services for 3560E-12D, upgrade from IP Services

IP Services for 3560E-12D, upgrade from IP Base

3560E12SD-AK9LB-QTY

3560E12SD-AK9LS-QTY

Advanced IP Services for 3560E-12SD, upgrade from IP Base

Advanced IP Services for 3560E-12SD, upgrade from IP Services

3560E12SD-SLB-QTY IP Services for 3560E-12SD, upgrade from IP Base

Power Supplies and Fan Module for the Cisco Catalyst 3560-E Series

C3K-PWR-265WAC= Catalyst 3750-E/3560-E 265WAC power supply

C3K-PWR-265WDC=

C3K-PWR-750WAC=

C3K-PWR-1150WAC=

C3K-BLWR-60CFM=

Catalyst 3750-E/3560-E 265WDC power supply

Catalyst 3750-E/3560-E/RPS 2300 750WAC power supply

Catalyst 3750-E/3560-E/RPS 2300 1150WAC power supply

Fan Module for the Catalyst 3750-E/3560-E

Power Supplies and Fan Module for the Cisco Catalyst 3560E-12D and Catalyst 3560E-12SD Aggregation Switches

C3K-PWR-300WAC= Catalyst 3560E-12D and Catalyst 3560E-12SD 300WAC power supply spare

C3K-PWR-300WDC= Catalyst 3560E-12D and Catalyst 3560E-12SD 300WDC power supply spare

C3K-FAN-16CFM= Fan Module for the Catalyst 3560E-12D and Catalyst 3560E-12SD

Redundant Power System for the Cisco Catalyst 3560-E Series

PWR-RPS2300

ACC-RPS2300=

Cisco Redundant Power System 2300 and Blower,No Power Supply

Spare Accessory Kit for Cisco Redundant Power System 2300

BLNK-RPS2300=

CAB-RPS2300=

CAB-RPS2300-E=

PWR-RPS2300=

BLWR-RPS2300=

C3K-PWR-750WAC=

C3K-PWR-1150WAC=

Spare Bay Insert for Cisco Redundant Power System 2300

Spare RPS2300 Cable for Devices other than E-Series Switches

Spare RPS2300 Cable for Catalyst 3750E/3560E Switches

Spare RPS 2300 Chassis w/ Blower, PS blank, No Power Supply

Spare 45CFM Blower for Cisco Redundant Power System 2300

Catalyst 3750-E/3560-E/RPS 2300 750WAC power supply spare

Catalyst 3750-E/3560-E/RPS 2300 1150WAC power supply spare

TwinGig Converter Module for the Cisco Catalyst 3560-E Series

CVR-X2-SFP TwinGig Converter Module

CVR-X2-SFP= TwinGig Converter Module

SFPs for the Cisco Catalyst 3560-E Series

GLC-GE-100FX= 100BASE-FX SFP for GE SFP port on 3750,3560.2970,2960

GLC-LH-SM=

GLC-SX-MM=

GLC-T=

GLC-ZX-SM=

GE SFP,LC connector LX/LH transceiver

GE SFP, LC connector SX transceiver

1000BASE-T SFP

1000BASE-ZX SFP

GLC-BX-D=

GLC-BX-U=

CWDM-SFP-1470=

CWDM-SFP-1490=

CWDM-SFP-1510=

CWDM-SFP-1530=

1000BASE-BX SFP, 1490NM

1000BASE-BX SFP, 1310NM

CWDM 1470 NM SFP Gigabit Ethernet and 1G/2G FC





Data Sheet

CWDM-SFP-1550=

CWDM-SFP-1570=

CWDM-SFP-1590=




CWDM-SFP-1610= CWDM 1610 NM SFP Gigabit Ethernet and 1G/2G FC

DWDM SFPs for Cisco Catalyst 3560-E Series (not currently supported with the Cisco Catalyst 3560E-12D & Catalyst

3560E-12SD)

DWDM-SFP-6061=

DWDM-SFP-5979=

DWDM-SFP-5898=

DWDM-SFP-5817=

DWDM-SFP-5655=

DWDM-SFP-5575=

DWDM-SFP-5494=

DWDM-SFP-5413=

DWDM-SFP-5252=

DWDM-SFP-5172=

DWDM-SFP-5092=

DWDM-SFP-5012=

DWDM-SFP-4851=

DWDM-SFP-4772=

DWDM-SFP-4692=

DWDM-SFP-4612=

DWDM-SFP-4453=

DWDM-SFP-4373=

DWDM SFP 1560.61 nm SFP (100 GHz ITU grid)


















DWDM-SFP-4294=

DWDM-SFP-4214=

DWDM-SFP-4056=

DWDM-SFP-3977=

DWDM-SFP-3898=

DWDM-SFP-3819=

DWDM-SFP-3661=

DWDM-SFP-3582=

DWDM-SFP-3504=










DWDM-SFP-3425=

DWDM-SFP-3268=

DWDM-SFP-3190=

DWDM-SFP-3112=

DWDM-SFP-3033=



1000BASE-DWDM 1531.90 nm SFP (100 GHz ITU grid)

1000BASE-DWDM 1531.12 nm SFP (100 GHz ITU grid)


10GB X2 Module for Cisco Catalyst 3560-E Series

X2-10GB-ER= 10GBASE-ER X2 Module

X2-10GB-LR=

X2-10GB-SR=

10GBASE-LR X2 Module

10GBASE-SR X2 Module

X2-10GB-LRM=

X2-10GB-LX4=

X2-10GB-CX4=

10GBASE-LRM X2 Module

10GBASE-LX4 X2 Module

10GBASE-CX4 X2 Module

LC to SC Cables for the Cisco Catalyst 3560-E Series


Data Sheet

CSS5-CABLX-LCSC=

CSS5-CABSX-LC=

CSS11500 10-Meter Fiber Single Mode LX LC-to-SC Connectors

CSS11500 10-Meter Fiber Multimode SX LC Connectors

CSS5-CABSX-LCSC= CSS11500 10-Meter Fiber Multimode SX LC-to-SC Connectors

Spare Power Cords for the Cisco Catalyst 3560-E Series

CAB-AC=

CAB-16AWG-AC=

Power Cord, 110V

AC Power cord, 16AWG

CAB-ACA=

CAB-ACE=

CAB-ACI=

CAB-ACR=

Plug, Power Cord, Australian, 10A

Power Cord Europe

Power Cord-Italian

Power Cord Argentina

CAB-ACS=

CAB-ACU=

CAB-JPN=

CAB-L620P-C13-US=

CAB-L620P-C13-JPN=

Power Cord for Switzerland

Power Cord UK

Power Cord-Japan

Power Cord, 250VAC, 15A, NEMA L6-20 to C13, US

Power Cord, 250VAC, 15A, NEMA L6-20 to C13, JAPAN

CAB-IND=

CAB-SFP-50CM=

Power Cord India

Catalyst 3560-E SFP Interconnect Cable, 50cm

Spare Rack Mount Kits for the Cisco Catalyst 3560-E Series

RCKMNT-E-1RU= Rack Mount Kit (1RU) for Catalyst 3750-E and 3560-E

Cisco Catalyst 3560-E Relicensing for Used Equipment

LL-3560E-IPB= IP Base SW Feature set license for Catalyst 3560-E Series

LL-3560E-IPS= IP Services SW Feature set license for Catalyst 3560-E Series

LL-3560E-AIS= Advanced IP Services SW Feature set license for Catalyst 3560-E

Software Application Support Plus Upgrades Technical Services Contract

Product Part Number

3560E-AISK9-LIC-B

Service Contract Number

Catalyst 3560-E AIS Upgrade from IP Base

3560E-AISK9-LIC-S

3560E-IPS-LIC-B

3560E12D-AK9LB-QTY

3560E12D-AK9LS-QTY

3560E12D-SLB-QTY

3560E12SD-AK9LB-QTY

3560E12SD-AK9LS-QTY

3560E12SD-SLB-QTY

Catalyst 3560-E AIS Upgrade from IP Svcs

Catalyst 3560-E IPS Upgrade from IP Base

Advanced IP Services for 3560E-12D, upgrade from IP Base

Advanced IP Services for 3560E-12D, upgrade from IP Services

IP Services for 3560E-12D, upgrade from IP Base

Advanced IP Services for 3560E-12SD, upgrade from IP Base

Advanced IP Services for 3560E-12SD, upgrade from IP Services

IP Services for 3560E-12SD, upgrade from IP Base

For More Information

For more information about the Cisco Catalyst 3560-E Series Switches, visit: http://www.cisco.com/en/US/products/hw/switches/index.html

or contact your local account representative.


Data Sheet

Printed in USA

All contents are Copyright © 1992–2008 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.

C78-377226-02 01/08

Page 23 of 23

Cisco Catalyst 3560-E 24-Port Multi-Layer Ethernet Switch w/ PoE Data Sheet

Cisco Catalyst 3560-E Series Switches

Cisco Catalyst 3560-E Series Primary Features

Switch Configurations

Cisco Catalyst 3560-E Series Fixed Configuration Aggregation Switches

Cisco Catalyst 3560-E Software

10 Gigabit Ethernet Uplinks and the Cisco TwinGig Small Form-Factor Pluggable

Converter

Product Specifications

Hardware Warranty

Service and Support

Ordering Information

For More Information

Related manuals

Cisco

WS-C3560E-12SD-S

Cisco

WS-C3560E-48PD-EF

Cisco

CATALYST 3560-E

Cisco

CVR-X2-SFP=

Cisco

C3K-PWR-300WDC=

Cisco

Catalyst 3560E-24PD-E

Cisco

WS-C3750E-24PD-E