Fujitsu PRIMERGY TX150 S5 Datasheet

PRIMERGY TX150 S5

Mono socket Dual-Core Tower Server

Low computing complexity with great data safety

Issue April 27, 2007

PRIMERGY TX150 S5

Pages 2

PRIMERGY TX Tower Servers ensure carefree and continuous operation with proven data center technology. Their design for maximum ease of use and ease of management has been honored with industry design awards in 2003 and

2004. The latest processor generation combined with innovative air flow cooling technology (“Cool-safe™”) assure a long life and the highest possible performance at work. And as your business grows, so do our PRIMERGY towers, providing plenty of headroom for expansion so that you benefit longer from your investments in PRIMERGY tower servers.

For corporate workgroups and remote sites, PRIMERGY TX servers ensure less troubleshooting and lower costs with their complete PRIMERGY ServerView Suite remote management functions – flexible management from anywhere at any time. Since corporate infrastructure is subject to consolidation changes, our universal tower-to-rack conversion kit protects your investment by prolonging the system’s lifecycle.

The flexible custom supply model and our build-to-order process mean that only fully built and pre-tested solutions are shipped to customers, who can select from a broad family of tower models to meet their individual needs.

PRIMERGY TX150 S5

The PRIMERGY tower server with the brand-new Intel®

Xeon® Dual-Core processor even quicker, yet has a lower clock rate and power consumption. This is achieved both with a 1066 MHz FSB clock rate and (mainly) with to Intel’s new state-of-the-art multi-core optimized microarchitecture. A server with this processor proves to be a particularly powerful system that can respond positively to your requirements.

Enhance your efficiency when it comes to simultaneous execution of multiple applications and downloading mass data. The processor with the Intel® 3000 chipset also supports EM64 technology. This fifth-generation tower server combines high performance with even less noise. The SAS or

SATA hot-plug hard disks can be replaced easily while the server is in operation. Both variants offer high data security thanks to built-in RAID 1 functionality. The standard iRMC

(Integrated Remote Management Controller) offers enhanced system management, based on IPMI 2.0 technology, and the redundant power supply module further increases operational reliability. The familiar, well-tried Intel Pentium® D (Dual-

Core) processor round out the offering.

Key Features

„ ECC, mirroring (RAID 1), integrated for SAS/SATA hard disks

„ Hot-plug functionality is available as option for the most important system components:

Hot-plug HDD infrastructure (standard)

Hot-plug redundant PSU (optional)

„ Dual-Core processor, provides two execution cores (each 2

MB Cache) in one physical processor

Benefits

„ High security against physical loss of data

„ Tailor made availability, offers the security level which is recommended by your individual application demands

„ Intel® Xeon® Dual-Core processor – high performance, yet low power requirements

„ Allowing the platform to do more in less time, IT departments can consolidate applications and more effectively employ the server

„ Less power consumption and noise

Data sheet

⏐ Issue: April 27, 2007⏐ PRIMERGY TX150 S5

Type

System board

Chip set

Processors

Mono Socket Tower Server

D2399

Intel® 3000

Intel® Pentium® D (Dual-Core) /

Intel® Xeon® UP (Dual-Core)

Type /

Frequencies (GHz)

Front-Side-Bus 800 MHz, 1066 MHz

Second-Level-Cache 2x2 MB / 2 MB, 4 MB (3060, 3070) ECC

Memory

925(3.0), 945(3.4) / 3040(1.86),

3050(2.13), 3060(2.40), 3070 (2.66)

512 Mbyte - 8 Gbyte ECC PC2-4200 DDR2 SDRAM; 4 slots;

(512 Mbyte, 1 Gbyte, 2 Gbyte)

Mix and match possible; with dual channel operation better performance (2 capacity equal modules necessary). Single channel

(1 module) configuration possible.

Flash-EPROM

Local BIOS update via bootable USB device or opt. floppy disk;

Remote BIOS update via LAN (Global Flash tool) and optional

RemoteView Service Board functionality).

Interfaces

Serial

Centronics (parallel)

Keyboard, Mouse

USB 2.0

Graphics

LAN

1 x serial RS-232-C (9-pin) usable for iRMC or system

1 x serial RS-232-C (9-pin) (optional)

1 x 25-pin, EPP/ECP compatible (opt.)

2 x PS/2

1 x front, 2 x back

1 x internal for backup drives

1 x VGA (15-pin)

1 x RJ45, 1 x service LAN (10/100

Mbit/s)

Onboard controller **

IDE

SAS variant

(LSI 1068)

1 x ATA100 (1 channel for 2 drives DVD

/ DVD-RW)

8 port SAS for internal HDD´s and internal backup devices with RAID 1

(Integrated Mirroring Enhanced also for odd numbered HD´s for Windows and

Linux)

SATA variant

(Intel® ICH7R)

LAN (Broadcom

BCM5721)

4 port for internal HDD`s with RAID 0, 1,

10 for Windows and Linux, optional enabling key for RAID 5

Ethernet 10/100/1000 Mbit/s

(PCE-Boot via LAN from PXE server)

Graphics Matrox G200 integrated in iRMC

Server management Integrated Remote Management

Controller iRMC, IPMI 2.0

PCI Controller **

RAID 5 Controller

MegaRAID

SAS 8308ELP

SAS ZCR (Zero Channel Controller), optional SATA 8-Port RAID 5, 128 MB

LSI Controller

Hard disk drives 36, 73, 146, 300 Gbyte SAS (hot-plug) or

80,160, 250, 500 Gbyte SATA (hot-plug)

1 Gbyte equals one billion bytes when referring to hard disk drive capacity; accessible capacity may vary.

I/O Slots:

2 x PCI-X 64-bit / 66 MHz, long; (3,3 V);

1 x PCI 32-bit / 33MHz, long (5V);

2 x PCI-Express, 1 x PCIe x1; 1 x PCIe x8 (x4 wired)

Drive bays

for hard disks

SAS/SATA variant

for accessible

drives

for floppy disk drive

4 x 3.5/1-inch, for hot-plug SAS/SATA

(in slide-in chassis)

+ 2 HDD box for SAS only (optional)

3x 5.25/1.6-inch, one bay is occupied by

DVD or DVD-RW

1x 3.5/1-inch, occupied by FDD

(optional)

Page 2 / 2

Electrical values

1x standard or 2x optional redundant hot-plug power supplies

Output power 400 W / 1 + 1 x 400 W each

Rated voltage range

Rated frequency

100 - 240 V

50-60 Hz

Max. rated current

AC output

Rated current in

basic configuration

Active power

100 V - 240 V / 1.9 - 0.8 A

Apparent power

Heat emission

260 W

269 VA

936 kJ/h (887 btu/h)

Temperature/Noise/Dimension/Weight

Ambient temperature

100 V - 240 V / 6 A – 3 A

- / -

10°C - 35°C (DIN IEC 721-3-3) class

3K2 idle / operating Declared noise in

according with ISO 9296

Sound pressure L pAm

Sound power L

WAd

Dimension

of floor-stand (HxWxD)

Weight

31 db(A) / 34 db(A)

4.8 B / 5.2 B (1 BEL = 10 db)

444 * 205 * 605 mm, incl. all plastics approximately 28 kg

Compliance with Norm and Standards

Product safety

Global

Europe

USA

Canada

IEC 60950

EN 60950

UL 60950 3rd. Ed.

CAN/CSA-C22.2 No. 60950 3rd. Ed.

Electro magnetic compatibility

This product and the released accessories, are in compliance with emission class A. In certain cases measures have to be taken to reduce the electro magnetic influence to other equipment.

Europe EN 55 022 class A, EN 55024,

EN61000-3-2 / -3

FCC class A USA / Canada

Declaration of conformity

Europe (CE) 89/336/EEC;

73/23 EEC

FCC class A North America

Approvals

Product safety

Global CB

Europe CE

USA / Canada CSA

US

/ CSA

C

There is general compliance with the safety requirements of all

European countries and North America. National approvals required in order to satisfy statutory regulations or for other reasons, can be applied for on request.

Supported operating systems

Actual release status operating systems: e.g. Microsoft; SUSE; Red

Hat; SCO see PRIMERGY released OS http://extranet.fujitsusiemens.com/products/primergy/opsys/relcurrsys/osrel_a.html

** For supported controllers (onboard and PCI cards for SCSI, SAS,

RAID, LAN, WAN, etc.), please refer to the corresponding system configurator.

Server Management (see separate data sheets)

Standard PRIMERGY ServerView Suite;

PDA, ASR&R

Optional RemoteView, iRMC Advanced Pack

All rights, including rights created by patent grant or registration of a utility model or design as well as rights of technical modifications are reserved. Delivery subject to availability. Designations may be trademarks, the use of which by third parties for their own purposes may violate the rights of the trademark owners.

Copyright

© Fujitsu Siemens Computers, 05/2007

Published by

Fujitsu Siemens Computers http://www.fujitsu-siemens.com/

Company stamp