

ZIG-HAVEX
HDMI EXTENDER
USER MANUAL
V1.0
Transmitter Receiver








Supports 10/100 base-T Ethernet switcher
(Compliant IEEE802.3, IEEE802.3u, IEEE802.3x)
8 standard Ethernet port (with switching capabilities on
each unit.
Supports IR/RS-232/Ethernet extension function.
IR extension function(Supports all frequency band IR
control)
Supports 3D pass-through
Supports CEC pass-through
Support RS-232(Bi-direction transfer)
Supports HDTV up to 1080p/60 4K x 2K
HD-baseT technology, HDCP 1.4 & 2.2 Compliant
Extend HDMI signal up to 100 meter 328 feet by using
a single cat-6/7 cable. You may also use a cat-5 cable
to extend up to 80 meters 260 feet.
Specifications
Function
Package Contents






1x ZIG-HAVEX Transmitter Unit
1x ZIG-HAVEX Receiver Unit
1 user manual
1x Power adapter DC 48V with lock
1x IR Receiver Cable
4x screws
8x foot pads





ZIG-HAVEX is a transmitter / receiver extender kit for
long distance transmission of HDMI video, embedded
audio, 4-port POE Ethernet switch, back channel
analogue or digital audio plus bi-directional control
signals over a single CAT – 5 /6 /7 type cables.
Supports HDMI 1.4 with 3D function
Supports HDMI 1.2 and 1.3a
HDCP Compliant
Supports POE
RECEIVER
HDMI In
HDMI A-Type Female
None
Connector
x1
HDMI Out
HDMI A-Type Female
Connector
x1
RJ-45 Connector
1
RJ-45 Connector
4
(with LED)
RS-232
1
Connector
1 Stereo RCA(L/R)
1 RCA(Coaxial)
Audio Input
None
1 Digit Optical
TOSlink
1 set RCA(L/R)
1 RCA(Coaxial)
Audio Output
None
1 Digit Optical
TOSlink
IR OUT
IR IN
Features
TRANSMITTER
IR1 IN
IR2 IN
Max. Resolution
Cable Distance
Power Adapter
(Min.)
Housing
Weight
Dimensions
(LxWxH)
-1-
LOCAL TOP VIEW
1. 1~4 port ETHERNET LINK/SPEED/FULL indicators.
LINK ( Flash : Activity )
SPEED ( ON : 100M, OFF : 10M )
FULL ( ON : Full duplex ,OFF : Half duplex ,
Flash : Collision)
2. POWER LED
3. HDCP LED
4. LINK LED
5. MODE LED
LOCAL FRONT VIEW
3.5ψ Stereo Jack x 1 3.5ψ Stereo Jack x 1
3.5ψ Stereo Jack x 1
None
None
Internal IR receiver
None
3.5ψ Stereo Jack x 1
1080P 60Hz / 4K x 2K
100 m (Max.)
DC 48V with lock
None
Metal
690g
695 g
245x120x25 mm
1. Power jack (48V DC)
2. AUDIO OUT(R/L)
3. AUDIO OUT(COAXIAL)
4. AUDIO OUT(OPTICAL)
5. AUDIO SELECT SWITCH
000 : L/R
001: Coaxial
010: Optical
6. HDMI IN
7. RS-232
8. IR IN
9. IR OUT
10. IR Connector
4. LINK LED
5. MODE LED
6. IR1 IN ( Internal IR receiver )
REMOTE FRONT VIEW
-3-
Installation
1. Be sure to turn OFF your HD source and HDTV.
2. Connect the HDMI extension cable between HD source
and the “HDMI IN” port of Transmitter.
3. Connect the HDMI extension cable between the HDTV
and the “HDMI OUT” port of Receiver.
4. Connect CAT.5 cables between the Transmitter “LINK”
port and the Receiver “LINK” port of extender.
5. Connect the power cord and power up the extender.
6. Turn on your HD source and HDTV.
LOCAL REAR VIEW
1. ETHERNET(1~4 port RJ-45 Connector with LED)
2. LINK (RJ-45 Connector)
-2-
REMOTE TOP VIEW
1. AUDIO IN(R/L)
2. AUDIO IN(COAXIAL)
3. AUDIO IN(OPTICAL)
4. AUDIO SELECT SWITCH
000 : L/R
001: Coaxial
010: Optical
5. HDMI OUT
6. RS-232
7. IR OUT
8. IR2 IN
9. IR Connector
IR Receiver
Pin configuration for 3.5mm IN terminal
GND
+V
Si g
REMOTE REAR VIEW
DO NOT PLUG MONO TIPE IR EMITTER INTO “IR-IN”
IR-in is design to be used with IR receivers.
1. 1~4 port ETHERNET LINK/SPEED/FULL indicators.
LINK ( Flash : Activity )
SPEED ( ON : 100M, OFF : 10M )
FULL ( ON : Full duplex ,OFF : Half duplex ,
Flash : Collision)
2. POWER LED
3. HDCP LED
1. ETHERNET(1~4 port RJ-45 Connector with LED)
2. LINK (RJ-45 Connector)
-5-
-4-
Technical Specifications Output Signal
Wiring Information & Coding
Conductor
Identi
ficati
on
Pair 1
Pair 2
Pair 3
Pin #
Signal
1 TMDS Data 2+
2 TMDS Data 2 Shield
3 TMDS Data 24
5
6
7
8
9
10
Pin #
Signal
11 TMDS Clock Shield
12 TMDS Clock 13 CEC
TMDS Data 1+
14
TMDS Data 1 Shield
TMDS Data 1TMDS Data 0+
TMDS Data 0 Shield
TMDS Data 0TMDS Clock+
15
16
17
18
19
Pair 4
RJ45 Pin
Assign
ment
5
4
1
2
3
6
7
8
-6-
Color Code for
Conductor
White-Blue
Blue
White-Orange
Orange
White-Green
Green
White-Brown
Brown
Reserved
(N.C. on device)
SCL
SDA
DDC/CEC Ground
+5 Power
Hot Plug Detect
©
All rights reserved
Trademarks:
All the companies, brand names, and product names
referred to this manual are the trademarks or registered
trademarks belonging to their respective companies.