IPad activation/ adding the Cybertill bookmark to your IPads Home Screen. In order to setup the IPad till for both the till and back office functionally please follow these instructions: 1. Open up Safari 2. Type in the address bar your Cybertill URL and press Go 3. If the IPad is already activated it will show the login screen if so skip to step 6 of this guide, is not activated enter your licence key and click “Next” 4. Enter your credentials and click “Login”. It will then load the following: 5. Select the mobile device from the drop down list and click “Next”. 6. Activation will now be complete. If you have a message advising that the activation needs to “be approved by someone within your organisation” please refer to Appendix A. 7. At the top right hand side of the screen you'll see an icon depicting an arrow that points out of a square, click this button. 8. Click the option to "Add to Home Screen" 9. Name the shortcut for Cybertill we recommend you set the name to “Cybertill” and Click “Add”. 10. You should now see an additional icon on your Home Screen called Cybertill (Unless you called it something else). 11. You will then be able to use this icon to quickly access Cybertill, setup complete. Appendix A As previously detailed within the instructions if you require the activation to be approved: • Contact your Head Office to approve the activation. • After Head Office have confirmed that it has been approved we now need to close and reload Cybertill. • At the top right hand side of the screen you'll see an icon depicting two squares behind the other, click this button. • Close call open tabs by clicking the “X” in the top left hand corner of the window. Until the following screen is displayed. • Type in the address bar your Cybertill URL and press Go, you will then be able to login and use Cybertill. • Whereas if you are accessing Cybertill via the Home Screen double click on the Home button and then swipe up to close the system. • Click on the “Cybertill” icon and you will then be able to use Cybertill.