4x4 HDMI2.0 Matrix Support 4K@60hz YUV4:4:4

4x4 HDMI2.0 Matrix
Support 4K@60hz YUV4:4:4, 18Gbps, HDR
Operating Instruction
1
Operating Instruction
Thank you for purchasing this product. For optimum performance and
safety, please read these instructions carefully before connecting,
operating or adjusting this product. Please keep this manual for future
reference.
SURGE PROTECTION DEVICE RECOMMENDED
This product contains sensitive electrical components that may be
damaged by electrical spikes, surges, electric shock, lightning strikes,
etc. Use of surge protection systems is highly recommended in order to
protect and extend the life of your equipment.
2
Operating Instruction
Table of Contents
1. Features.....................................................................................4
2. Package Contents.....................................................................4
3. Specifications............................................................................4
4. Panel Descriptions....................................................................5
5. Connecting and Operating.......................................................6
6. Application Diagrams...............................................................6
7. Remote Control Description.....................................................7
8. RS232 Pin Assignment.............................................................7
9. RS232 Control............................................................................8
9.1 Software Control.......................................................................8
9.2 Command Control...................................................................11
10. Web Control...........................................................................13
Warranty Policy............................................................................15
3
Operating Instruction
Dear Customer
Thank you for purchasing this product. For optimum performance and safety, please read
these instructions carefully before connecting, operating or adjusting this product. Please
keep this manual for future reference.
1. Features










4xHDMI input, 4xHDMI output, any one of the 4 sources to any one of the 4 Displays.
HDMI2.0 Version (4K@60HZ YUV4:4:4)
Data transmission bandwidth up to 18 GBPS
Support HDR.
Support HDCP2.2 input, HDCP2.2 output
Support Panel button, Local IR, IR routing, RS232 control and Web GUI Control
Support EDID management functions
Support Dolby TrueHD and DTS-HD Matter audio
1U rack design, easy installment
Unit size: L438XW220XH44 mm.
2. Package Contents
1). 1x HDMI Matrix
2). 1x 12V DC power supply
3). 1x Remote control
4). 4x IR TX cable
5). 4x Wide Band IR RX Cable (38khz-56khz)
6). 1x 38khz IR Ext RX Cable
7). 1x mounting kit
8). 1x CD for control software & user manual
3. Specifications
Bandwidth
18 Gbps
Resolution
480p,576P@50hz,720P@60hz,
1080P@24hz,1080P@50hz,1080P@60hz,4K@24hz,4K@30hz,
4K@60hz YUV4:2:0, 4K@ 60hz YUV4:4:4
Video Input Connectors
4xHDMI Type A, 19-pin, female
Video Output Connectors
4xHDMI Type A, 19-pin, female
RS-232 serial port
DB-9, female
Ethernet port (IP control)
RJ-45, female
IR Input ports
5x3.5mm stereo jack
IR Output ports
4x3.5mm stereo jack
Rack-Mountable
Rack ears included
Dimensions(WxHxD)
L438XW220XH44 mm
Net Weight
2.68 kg
Operating Temperature
32°F to 104°F (0°C to 40°C)
Storage Temperature
-4°F to 140°F (-20°C to 60°C)
Power consumption
12W(Max)
4
Operating Instruction
4. Panel Descriptions
① Power on/off.
② These LED indicates the status of each output selection.
③ IR receive window.
④ Input button IN1~4: choose the desired input port from ports 1~4.
⑤ Output button OUT1~4: choose the desired output port from ports 1~4.
⑥ Lock: Press this button, then all the button on the unit is useless, which mean all the
buttons locked
⑦ ALL: Press this button to set all the outputs to display with the same input. First press
the “ALL” button then press an input number to confirm the selection.
The “Lock” button will light when all the buttons are locked.
① LAN port.
② RS232 port.
③ HDMI input port.
④ IR-RX.
⑤ IR-TX.
⑥ IR-Ext.
⑦ HDMI output port.
⑧ Power input: 12V
5
Operating Instruction
5. Connecting and Operating
1. Connect source devices to input ports of the matrix
2. Connect HDMI output ports to TV or other HDMI sink devices.
3. Optional: connect RS232 cable from PC RS232 port.
4. Optional: connect an Ethernet cable from the TCP/IP port on the matrix to a local area
network.
5. Connect 12V POWER supply to DC power socket.
6. Power on the matrix, HDMI sources and displays.
6. Application Diagram
6
Operating Instruction
7. Remote Control Description
① Standby Mode.
② OUTPUT-X select INPUT-Y:
Press OUTPUT-X (X means 1 to 4 of outputs)
Press INPUT-Y (Y means 1 to 4 of inputs)
③ All outputs select INPUT-Y:
Press ALL button in zone OUTPUT
Press INPUT-Y button (Y means 1 to 4 of inputs),
then INPUT-Y switched to ALL OUTPUTS.
④ Cancel Button: Cancel the switching operation
⑤ PTP button: Mirror all inputs and outputs
(Ex. Input 1 to output 1, input 2 to output 2, etc):
Press PTP button in Zone OUTPUT.
8. RS232 Pin Assignment
Matrix
Remote Control Console
PIN
Assignment
PIN
Assignment
1
NC
1
NC
2
Tx
2
Rx
3
Rx
3
Tx
4
NC
4
NC
5
GND
5
GND
6
NC
6
NC
7
NC
7
NC
8
NC
8
NC
9
NC
9
NC
Baud Rate: 115200 bps
Data Bits: 8 bit Parity: None Stop Bit: 1 bit
Flow Control: None
7
Operating Instruction
9. RS232 Control
9.1 Software control
Connect the 4x4 Matrix to PC with a RS232 cable, open the software on your PC. On the
COM Setting session, select the COM port according to your PC and click Connect to get
connected.
On this COM setting session, you can also change the Device name, Device name
support up to 16 characters. Save or edit your status by clicking the Edit button.
Come to Port Set session to select or switch your input sources for each output, We can
read the current status by clicking the “Status” button, or Clear our historical operating
record by clicking “Clear” button. The right down blank shows the operating history.
Picture 1
8
Operating Instruction
The EDID session helps us to Read and Configure EDID for each input, such as HDR, 3D,
Data rates and Audio channel.
Picture 2
The IP configure session helps to read and configure the IP address and MAC of the
Matrix. Check DHCP if you want the router assign an automatic IP for the Matrix.
Picture 3
9
Operating Instruction
The Net Config session allows us to configure the PC and Matrix in the same LAN with the
IP Address and connection.
Click “Net config” → “Connect” → “Search Device” → “Sel Device Number” →“Connect”
Picture 4
Picture 5
10
Operating Instruction
The last session is System Config, which allows power ON/OFF or reset, default the
Matrix.
Picture 6
9.2 Command Control
1). Open CommUart Assistant.
2). Comport setting:
Baud Rate:
115200 bps
Parity:
None
Data Bits:
8 bit
Stop Bits:
1 bit
3). Enter Port Command in Send options.
Picture 7
11
Operating Instruction
4). Command
Command
Function
Note
Mirror all inputs and outputs
(Ex. Input 1 to output 1, input 2 to output 2, etc)
@W 04 00 01 02 03 #
PTP Function
@W 50 #
@W 51 #
Reboot
Restore Factory Setting
@W 0F 00 #
Standby
00: Standby Mode
01: Cancel “Standby Mode”
5). Select HDMI input for HDMI output
Command
Description
00
Output1
01
Output2
02
Output3
03
Output4
04
All Output
00
Input1
01
Input2
02
Input3
03
Input4
E.g: @W 00 00 #: Ouput 1 display Input1
Ouput 1
Input1
6). EDID Setting
@W XX AA BB #:
Parameter Description:
XX for configuration of “INPUT EDID”
Command
05
06
07
08
Description
Input1
Input2
Input3
Input4
AA for selecting “Video Mode”
Command
00
01
02
03
Description
1080P
4K2K_30
4K2K_60(YC420)
4K2K_60(YC444)
BB for selecting belowing function
Bit7
Bit6
Bit5
Bit4
Bit3
Bit2
Bit1
Bit0
HDR
48Bit
36Bit
30Bit
7.1CH
5.1CH
2CH
3D
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
“1” : choose with the function, “0” : doesn’t choose with out the function.
E.g: 11001001: HDR, 48Bit, 7.1CH, 3D
Chang Binary code “11001001” to hexadecimal format “C9”.
E.g: @W 05 03 C9 #
The EDID of input 1 is: 4K2K_60(YC444)、HDR、48Bit、7.1CH、3D.
12
Operating Instruction
10. Web Control
1). Connect the HDMI Matrix and PC to the LAN.
2). Open the PC tool (included in the CD).
3). Search the IP address of HDMI Matrix, please refer to picture 4 & picture 5.
4). Open the web browser and enter the IP address you searched, then you can set the
function as below pictures:
Picture 8: Port Setting Page
Picture 9: EDID Setting Page
13
Operating Instruction
Picture 10: IP Configuration Page
MAINTENANCE
Clean this unit with a soft, dry cloth. Never use alcohol, paint thinner of benzine to clean
this unit.
PRODUCT SERVICE
(1)Damage requiring service:
The unit should be serviced by qualified service personnel if:
(a) The DC power supply cord or AC adaptor has been damaged;
(b) Objects or liquids have gotten into the unit;
(c) The unit has been exposed to rain;
(d) The unit does not operate normally or exhibits a marked change in performance;
The unit has been dropped or the cabinet damaged.
(2)Servicing Personnel: Do not attempt to service the unit beyond that described in
these operating instructions.Refer all other servicing to authorized servicing personnel.
(3)Replacement parts: When parts need replacing ensure the servicer uses parts
specified by the manufacturer or parts that have the same characteristics as the
original parts. Unauthorized substitutes may result in fire, electric shock, or other
Hazards.
(4)Safety check: After repairs or service, ask the servicer to perform safety checks to
confirm that the unit is in proper working condition.
WARRANTY
If your product does not work properly because of a defect in materials or workmanship,
our Company (referred to as "the warrantor" ) will, for the length of the period indicated as
below, (Parts(2)Year, Labor(90) Days) which starts with the date of original purchase
("Limited Warranty period"), at its option either(a) repair your product with new or
refurbished parts, or (b) replace it with a new of a refurbished product. The decision to
repair or replace will be made by the warrantor.
During the "Labor" Limited Warranty period there will be no charge for labor.
During the "Parts" warranty period, there will be no charge for parts. You must mail-in your
product during the warranty period. This Limited Warranty is extended only to the original
14
purchaser and only covers product purchased as new. A purchase receipt or other proof of
original purchase date is required for Limited Warranty service.
MAIL-IN SERVICE
When shipping the unit carefully pack and send it prepaid, adequately insured and
preferably in the original carton. Include a letter detailing the complaint and provide a
day time phone and/or email address where you can be reached.
LIMITED WARRANTY LIMITS AND EXCLUSIONS
1) This Limited Warranty ONLY COVERS failures due to defects in materials or
workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage.
The Limited Warranty ALSO DOES NOT COVER damages which occurred in shipment,
or failures which are caused by products not supplied by warrantor, or failures which result
from accidents, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty
installation, set-up adjustments, misadjustment of consumer controls, improper
maintenance, power line surge, lightning damage, modification, or service by anyone
other than a Factory Service center or other Authorized Servicer, or damage that is
attributable to acts of God.
2) THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER "LIMITED
WARRANTY COVERAGE". THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR
CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR
ARISING OUT OF ANY BREACH OF THIS WARRNTY. (As examples, this excludes
damages for lost time, cost of having someone remove or re-install an installed unit if
applicable, travel to and from the service, loss of or damage to media or images, data or
other recorded content. The items listed are not exclusive, but are for illustration only.)
3) PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY,
ARE YOUR RESPONSIBILITY.
15