Hubbell IMH110ST2OW Spec Sheet

HUBBELL PREMISE WIRING
COPPER
COPPER SYSTEMS
HDMI High-Definition
110 UTP Video Extenders
 Extend
HDMI Signal Over UTP
 110
Termination Reduces
Installation Time
 HD

High Definition Video 1080p
Customize Point to Point Runs
on Site
FEATURES
 Locating
a display device up to 147 feet away is
as simple as pulling 2 additional UTP cables
to a drop
 Terminate with Category 5e, 6 or 6A UTP plenum
or non-plenum cable
 Supplied as a kit with a "Source" and "Display"
frame/module and a 5-volt DC power supply
SPECIFICATIONS
Connector: 19-pin, Type A, female connector,
gold plated 2u"
 IDC Contact: phosphor bronze with tin plating
over nickel under plating
 Material: high impact thermoplastic

PERFORMANCE
Applications:
 Type A is electrically compatible with

single-link DVI-D
Hubbell's HDMI High-Definition 110 Video Extender transmit 1080p signals
over two solid unshielded twisted-pair (UTP) cables, allowing video display
devices to be located up to 147 feet away from a digital source. Ideal for
projectors, smartboards, HDTVs, flat screens and monitors and other video
display devices. The HDMI Video Extender is supplied as a kit with both
Source (passive) and Display (active) adapter frame/modules that feature an
LED to indicate that power and signal are working properly.
 Video signal: 480i, 480p, 576i, 576p,

720p,1080i, 1080p
 Audio Signal: PCM, DVD-Audio, Super

Audio CD, Dolby True HD, DTS-HD
Master Audio
 Electrical:
 Distance Limitations:
 Hubbell Approved Cable
45 meters (147') = Cat 6A
40 meters (130') = Cat 6
 35 meters (115') = Cat 5e
 Mechanical:
 Nose contact: 250 Insertions
 Connector Outside Dimensions:
13.9mm wide by 4.45mm high
 LED indicates that power and signal are
working properly
 Important: Always allow for clearance behind
connection location to ensure for proper bend
radius with HDMI cable assemblies
STANDARDS
HDMI Version 1.3
HDCP Compliant
 UL 1863 Modules and Frames
 C-UL-us Listed Power Supply
 RoHS Complaint


APPLICATIONS






Flat panel TVs, monitors
Projectors
White/smart boards
Game consoles
Component and portable devices
Computers and laptops
www.hubbell-premise.com
HUBBELL PREMISE WIRING
COPPER
DIMENSIONS
ORDERING INFORMATION
HDMI High-Definition 110 UTP Video Extender
1.45
Description
DC
Installation
Color
Decorator
110 UTP HDMI
extender (pair)
5 Volt
2 4-pair
UTP Cables
Black
ISFH110BK IMH110ST2BK
Electric Ivory ISFH110EI
Module - 2U
IMH110ST2EI
ISFH110GY IMH110ST2GY
Gray
Office White ISFH110OW IMH110ST2OW
ISFH110W
White
IMH110ST2W
4.19
ACCESSORIES
Patch Cords
HDMI, 24AWG
Color
3 Foot
6 Foot
Black
HDPC03BK
HDPC06BK
1.06
1-Gang
Decorator Wallplates
Color
Catalog Number
Almond
NP26AL
Black
NP26BK
Gray
NP26GY
Ivory
NP26I
Light Almond
NP26LA
Office White
NP26OW
White
NP26W
3.28 3.81
Light Almond is the same color as Office White.
Hubbell iSTATION Modular Face Plate Frames
Gangs
1-Gang
2-Gang
Unit of Measure
1 per bag
1 per bag
Catalog No.
IMF1xx
IMF2xx
1.85
.86
xx = Color: AL (Almond), BK (Black), EI (Electric Ivory), GY (Gray), OW (Office White),
1.90
and W (White). See color chart on page V30.
Hubbell iSTATION Stainless Steel Plates
Gangs
1-Gang
2-Gang
3-Gang
4-Gang
Unit of Measure
1 per bag
1 per bag
1 per bag
1 per bag
Catalog No.
IMSS1
IMSS2
IMSS3
IMSS4
1.06
1.85
.86
1.90
IMF1OW
IMF2OW
IMSS1
IMSS2
1.06
www.hubbell-premise.com
HUBBELL PREMISE WIRING
COPPER
Termination Instructions
NOTE: This product is compatible with devices utilizing HDMI
1.3 version connections.
Step 1: Terminate UTP cable to the Source and Display adapters
using a standard 110 termination tool. Follow the color code
conductor label on the rear of the adapters.
Be sure to match up cable 1 and cable 2 to IDC labels 1 and 2 on rear
of the adapters.
Note: Always label the UTP cable before pulling cable
Example: Adapter 1 Cable 1, IDC Block 1 & Adapter 1 Cable 2,
IDC Block 2
Ca
Ca
ble
ble
2
1
le 1
Cab
le 2
Cab
Step 2: Secure the adapters to the outlet box or I Station Frames etc.
Step 3: Attach HDMI patch cable from the source device to the Source
adapter.
Step 4: Attach the HDMI patch cable from the device to the Display
adapter.
Step 5: Attach the 5V DC connector on the transformer to the DC input
connector on the Display adapter.
Step 6: Plug the Transformer into a 110V AC outlet.
Step 7: Power up the Source Unit and the Display units.
Optimum performance is achieved by not exceeding the
following Maximum UTP cable lengths:
C5e: 35 Meters, C6: 40 Meters, C6A: 45 Meters
Source
Display
2 UTP Solid Plenum or Non-Plenum Cables
Horizontal Run
Projectors
Computers
Whiteboards
Viewing Devices
Computers
AV Receivers
Game Consoles
DVD/DVR Players
Trouble Shooting Section
If "no-signal" appears on the display screen check the following:
1. Disconnect the HDMI cables and the DC power from the Display adapter.
2. Check all UTP terminations on Display and Source adapters for proper installation, check for proper wire-map and for cut wires.
Re-terminate if needed.
3. Check the DC power supply, ensure transformer is plugged into a appropriate AC outlet and that the DC connection is installed at the
display adapter. The blue LED on the adapter should be illuminated when DC power is connected properly.
4. Install all HDMI cables to devices and adapters and perform start up in termination instructions.
5. If "no-signal" still appears on the display after following the above steps re-start both the display and source units.
®
Premise Wiring
www.hubbell-premise.com
Hubbell Premise Wiring • Hubbell Incorporated (Delaware) • 23 Clara Drive • Suite 103 • Mystic, CT 06355 • Phone (800) 626-0005 • FAX (860) 535-8328
Printed in U.S.A. Specifications subject to change without notice.
® is a registered trademark of Hubbell Incorporated.
PLDC020 08/12