THE POWERFUL AND STANDARDIZED 19" SYSTEM

8. 19" BENCH RACKS WITH 19“ MODULES AND CASSETTES
THE POWERFUL AND STANDARDIZED
19" SYSTEM
DIRECTORY CHAPTER 8
8.4 PROFI Multimedia Support and System Rack
8.41 19" Variable AC/DC Source 1phase
8.7 PROFI 19" Cassette Bench Rack 3HE
8.42 19" AC Source 3phase
8.9 PROFI 19" Cassette Bench Rack and Carrying Case
8.43 19" Variable AC/DC Source 3phase
8.11 PROFI 19" Bench Rack 5HE + 7HE
8.44 19“ Remote Controlled AC Source REMOTE
8.12 EASY Bench Rack with 19“ and EP
8.45 19" Motor Tester with Frequency Converter
8.13 19" PROFI Mobile Rack
8.46 19" Motor Tester with Variac
8.15 PROFI 19" Rack
8.47 19" Counter
8.16 19" Drawer, Carrying Case and Folding Table
8.48 19" 1-/ 3phase Sine Frequency Converter
8.17 Accessory for Bench Rack (Power Cord, Flap
8.49 19“ DC Power Supply Fixed Voltage; Laboratory Power Sockets, ect.)
Supply Compact
8.18 Signal Lamp
8.50 19“ Laboratory Power Supply Extended Range
8.20 Brush Channel and Cable Clearance Rake
8.51 19“ Laboratory Power Supply Standard
8.21 Cable Clearance Flap and Drawer
8.53 19“ Laboratory Power Supply REMOTE
8.23 19" TE/ HE Blank Panel, - Cassette and - Module
8.54 19" High Performance Laboratory Power Supply
8.24 19" Installation Panel; 19" Panel with Emergency Off
8.55 19“ Didact Power Supply
8.25 19“ Mains Supply 16A
8.56 19“ Function Generator Compact with Amplifier
8.26 19" Mains Supply 32A; 19" Didact Mains Supply
8.57 19“ Function Generator 2MHz LC / 20MHz LC USB
8.28 19" Control Unit for Instructor Bench
8.58 19“ Precision Function Generator 20 MHz USB / LAN
8.29 19" Socket Panel and 19" Socket Module
8.60 19“ Digital Multimeter LC; Digital Multimeter Compact
8.30 19" Panel with Isolated Transformer and CEE Socket
8.61 19“ Precision Digital Multimeter USB / LAN
8.31 19" Multi Measuring Unit
8.62 19" Oscilloscope
8.32 19" Test Speaker and Continuity Tester
8.63 19" Signal Generator and Digital Thermometer
8.33 19" Selective Poles and 19" Interface
8.64 19“ Pressured Air Supply and Pressure Calibrator
8.34 19“ Soldering Station analogue/ digital
8.65 19" Pressure Calibrator and Manual Pressure Pump
8.35 19“ Soldering/ Desoldering Repair Station UNIVERSAL
8.66 19“ Electrical Appliance Tester analogue/ digital
8.36 19" R-Decade / L-Decade / C-Decade
8.67 19" High Voltage Tester and 19" Universal Tester
8.37 19" Load Resistance
8.68 19" Sub Rack
8.39 19" AC Low Voltage 1-/ 3phase
8.69 PROFI 19" Shelf Unit
8.40 19" Variable AC/DC Source
www.hera.de | technical details are subject to change without notice
8.1
8. 19" BENCH RACKS WITH 19" MODULES AND CASSETTES
OPTIMAL IN COMBINATION WITH
COMPLEX INSTRUMENT CONFIGURATIONS
AND HIGH OUTPUTS
DEVICES OF DIFFERENT BRANDS? NO PROBLEM.
This system offers the possibility of individual set-ups in standardized 19“
technology. hera offers a great variety of high technology devices, however the
standard 19“ rack allows the integration of other brands, too. Due to its modularity the PROFI system accepts various instruments and devices without any visible
cable runs.
STAY CALM EVEN WITH HEAVY UNITS.
All individual set-ups with heavy devices could be realized without any loss in
stability.Sufficientairventilationpreventsevenhighperformanceunitsfromgetting
overtemperatured.
8.2
technical details are subject to change without notice | www.hera.de
8. 19" BENCH RACKS WITH 19“ MODULES AND CASSETTES
www.hera.de | technical details are subject to change without notice
8.3
8. 19" BENCH RACKS WITH 19" MODULES AND CASSETTES
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
A
B
C
PROFI MULTIMEDIA SUPPORT
D
E
Heavy duty support with modular equippable channel at
the rear side and complete hidden cable runs.
F
• Rear side compact terminal for the modular
acceptance of all modules in KK raster.
G
H
• Surrounding heavy duty steel frame for the hidden cable run into the PROFI extensions.
• Front brace ergonomically bevelled for the optional acceptance of the LED workstation lamp.
J
K
L
• Durable, conductive powder coating in light grey or anthracite.
M
• Dimensions: 390 x 75/40mm (DxH).
N
P
Your adventage with the multimedia support and system rack
Q
R
Laborsysteme GmbH
R
Allgemeintoleran
DIN ISO
2768 mK
Datum
Bearb. 13.12.20
Gepr.
1
2
3
4
5
6
• Rear side with variably equippable compact terminal, thus each configuration is possible with just a system rack.
7
8
9
10
11
12
13
14
15
16
17
• Completely suspended due to integrated heavy duty steel frame.
• Front brace for LED Workstation Lamp
PROFI Multimedia Support 424.0 BB. 8 F 0
BB Width and Equipment (SINGLE / ENERGY)
F Extensions
05
500mm (39cm / 26cm)
13
1295mm (118cm / 105cm)
0
SINGLE / MULTI
06 603mm (49cm / 36cm)
15
1500mm (139cm / 126cm)
1
ENERGY
08
800mm (69cm / 56cm)
16
1600mm (149cm / 136cm)
09
900mm (79cm / 66cm)
18
1800mm (169cm / 156cm)
10
1000mm (89cm / 76cm)
20
2000mm (189cm / 176cm)
12
1200mm ( 109cm / 96cm)
23
2303mm (219cm / 206cm)
Modularity of the Multimedia Support:
The rear side of the Multimedia Support is with integrated compact terminal straight, thus
the multimedia support could be equipped with the broad variety of modules in KK raster.
Ai
BUS
DV
I
H
su
es
Pr
45
RJ
23
RS
C
S o EE
ck
et
s
2
re
ub
d
l
In
So ter
c k n at
et i o n
s
a
S
Sw ock
itc ets
he a
s nd
R
C esi
ur du
re a
nt l
D
ev
ic
e
r
Examples for KK Modules:
see
page 6.5 - 6.7 for all KK modules with article No, technical details and dimensions
8.4
technical details are subject to change without notice | www.hera.de
01.01.18
Norm
Status in arbeit
Verbesserungen
die dem technisc
dienen, behalten
18
19
20
Zust.
Änderung
Datum Name Vorlage:
C:\Workflow\424.0BB.800_PROFI_Multimedia-Konsole_zw
8. 19" BENCH RACKS WITH 19“ MODULES AND CASSETTES
SYSTEM RACK FOR THE MULTIMEDIA SUPPORT
The system rack is placed on the multimedia support and
could be individually combined with shelf sections. The
device panels and modules are simply connected to the
sockets in the rear side of the multimedia support.
• Body made of 19mm thick melamine resin covered chipboard.
• Lower side recessed for the access to the multimedia support.
• Customized intermediate wall for the separation of device - and shelf section.
• Detachable powder coated sheet steel rear panel with ventilation slots.
• Mounting strip for EP/ MP modules,
19“ raster profile, cage nuts and guiding rails.
STRAIGHT 3HE,5HE or 7HE:
TILTED 7HE:
• Straight device front and straight top.
• 10° tilted device front with tilted top and stop edge.
• Modular for different module systems
integrated in one rack.
• Height 175mm for 19“ panels up to 3HE
and EP modules.
• Height 440/ 350mm for 19“ panels
up to 7HE and 7HE modules.
• Depth 500/ 440mm.
• Height 265mm for 19“ panels up to 5HE
and MP modules.
• Height 355mm for 19“ panels 7HE and 7HE modules.
500mm
• Depth 470mm.
350mm
440mm
500mm
3HE
5HE
7HE
440mm
www.hera.de | technical details are subject to change without notice
8.5
8. 19" BENCH RACKS WITH 19" MODULES AND CASSETTES
SYSTEM RACK FOR THE MULTIMEDIA SUPPORT
H Height
3
5
STRAIGHT 3HE for EP modules and 19" panels
pic.: 19“ system rack STRAIGHT 3HE panel with 2x EP modules and
1x 19“ 3HE panel and 1x intermediate wall
7
pic.:
STRAIGHT 5HE for MP modules and 19" panels
pic.: 19“ system rack STRAIGHT 5HE with 1x MP module, 1x shelf
unit, 1x 19“ 3HE panel and 1x intermediate wall
8
STRAIGHT for 7HE 19" panels and 19“ modules
pic.:
19“ system rack STRAIGHT 7HE with 2x 19“ module,
3x 19“ 7HE panels and 4x intermediate wall
TILTED for 7HE 19" panels and 19“ modules
19“ system rack TILTED 7HE with 1x 19“ module,
2x 19“ 7HE panels, 1x shelf unit and 3x intermediate walls
F Cutout
0 with SINGLE/ MULTI
cutout
System Rack for Multimedia Support
42 A . H BB .8 F
A Version H Height
BB Width
0
Standard
1
ESD
3
5
7
8
8.6
1 between SINGLE-/
MULTI extensions
5 between ENERGY
extensions
6 no cutout
Z
F Cutout
Z Intermediate Wall
STRAIGHT 175mm
05
500mm
13
1295mm
0
for SINGLE / MULTI
0
no
for 3HE / EP
06
603mm
15
1500mm
1
between. SINGLE /MULTI
1
Intermediate Wall
STRAIGHT 265mm
08
800mm
16
1600mm
5
between ENERGY
2
Intermediate Wall
for 5HE / EP
09
900mm
18
1800mm
6
no cutout
3
Intermediate Wall
STRAIGHT 355mm
10
1000mm
20
2000mm
4
Intermediate Wall
for 7HE
12
1200mm
23
2303mm
5
Intermediate Wall
TILTED 7HE
technical details are subject to change without notice | www.hera.de
8. 19" BENCH RACKS WITH 19“ MODULES AND CASSETTES
PROFI 19" CASSETTE RACK SUPERSTRUCTURE 3HE
• Suspended, light grey bench rack with tilted front, made of 19mm thick melamine resin covered chip
board.
• Bottom with ventilation slots.
• Detachable, sectioned rear panel.
•
19" sub rack for 3HE cassettes in euro raster and 3HE front panels in multiplier raster (DIN 41494). Right and left side with compensating panel incl. guiding rail and H15 connector.
• Ventilation panel made of sheet steel (powder coated according to RAL-No.).
• Connectors completely wired with cental wire harness and terminal block.
245mm
185mm
380mm
PROFI 19" Cassette Rack Superstructure 3HE
421. BB A . F 01
A Version
BB Width / Equipment
F Extensions
08
800mm / 133TE
16
1600mm / 294TE
0
Standard
9
SINGLE / MULTI
09
900mm / 154TE
18
1800mm / 336TE
1
ESD
7
ENERGY
10
1000mm / 175TE
20
2000mm / 371TE
12
1200mm / 224TE
23
2303mm / 434TE
13
1295mm / 231TE
50 Corner 1213 x 1213 / 210TE
15
1500mm / 273TE
www.hera.de | technical details are subject to change without notice
8.7
8. 19" BENCH RACKS WITH 19" MODULES AND CASSETTES
PROFI 19" CASSETTE BENCH RACK 3HE
• Light grey body with tilted front, made of 19mm thick melamine resin covered chipboard. Optionally sides with cutout for PROFI extensions.
• Detachable powder coated perforated rear panel with two cable glands.
•
19“ sub rack for 3HE cassettes in euro raster and 3HE front panels in multiplier raster (DIN 41494). Right and left side with compensating panel incl. guiding rail and H15 connector.
• Ventilation panel made of sheet steel (powder
coated according to RAL-No.). With integrated Schuko sockets, grey 45° positioned.
• Connectors and Schuko sockets completely wired with cental wire harness and terminal block.
• Height: 260mm, Depth: 340/ 370mm.
19" Cassette Bench Rack 3HE
BB
421. BB A . F 01
Width / Equipment / Pcs. Sockets
A Version
F Extensions
06
600mm / 105TE / 2 Schuko
18
1800mm / 336TE / 6 Schuko
5
Standard
9 SINGLE/ MULTI
08
800mm / 133TE / 2 Schuko
20
2000mm / 371TE / 6 Schuko
6
ESD
7 ENERGY
09
900mm / 154TE / 2 Schuko
23
2303mm / 434TE / 6 Schuko
10
1000mm / 175TE / 2 Schuko
50
Corner 1213 x 1213 / 217TE
12 1200mm / 224TE / 4 Schuko
51
Corner 835 x 835 / 105TE
13
1295mm / 231TE / 4 Schuko
52
Corner 935 x 935 / 133TE
15
1500mm / 273TE / 4 Schuko
53
Corner 1035 x 1035 / 161TE
1 no cutout
16 1600mm / 294TE / 4 Schuko
8.8
technical details are subject to change without notice | www.hera.de
8. 19" BENCH RACKS WITH 19“ MODULES AND CASSETTES
PROFI 19" CASSETTE BENCH RACK 3HE
• Body made of 19mm thick melamine resin covered chipboard, optionally sides with cutouts for PROFI extensions.
• Detachable, powder coated rear panel made of
perforated steel with two cable glands.
•
19“ sub rack for 3HE cassettes in euro raster and 3HE front panels in multiplier raster (DIN 41494). Right and left side with compensating panel incl. guiding rail and H15 connector.
• Connectors completely wired with central wire harness and terminal block.
• Heigth: 175mm, depth: 380mm.
19" Cassette Bench Rack 3HE
BB
218. BB A . F 01
Bench Width / Equipment
(between SINGLE/ MULTI)
F Extensions
A Version
06
600mm / 105TE (91TE)
18
1800mm / 336TE (322TE)
2 no extensions
5
Standard
08
800mm / 133TE (119TE)
20
2000mm / 371TE (357TE)
0 between SINGLE/ MULTI
6
ESD
09
900mm / 154TE (140TE)
23
2303mm / 434TE (420TE)
10
1000mm / 182TE (161TE)
50
Corner 1213 x 1213 (217TE )
12
1200mm / 224TE (210TE)
51
Corner 835 x 835 (105TE)
13
1295mm / 231TE (217TE)
52
Corner 935 x 935 (133TE)
15
1500mm / 273TE (259TE)
53
Corner 1035 x 1035 (161TE)
16
1600mm / 294TE (280TE)
width = bench width - 80mm
CARRYING CASE FOR 19" CASSETTES
• Front and rear frame made of aluminium profile, housing of light grey sheet steel, sides with recessed grip.
• 19“ sub rack for 3HE cassettes in euro raster and 3HE front panels in multiplier raster of 5,08mm (DIN 41494).
• Incl. guiding rail and H15 connector.
• Completely wired with 2m Schuko power cord.
• Height: 132mm, depth: 389mm.
Carrying Case for 19“ Cassettes 394.3 BB .101
3HE
BB Width / Equipment
42
241mm / 42TE
63
342mm / 63TE
84
449mm / 84TE
www.hera.de | technical details are subject to change without notice
8.9
8. 19" BENCH RACKS WITH 19" MODULES AND CASSETTES
THIS IS HOW WE REALIZE SUFFICIENT
AIR VENTILATION AND STIFFENING
Thanks to a solid steel panel the hera 19“ bench rack could be used for
suspended set-ups; either without extra stiffening for benches of max.
1295mm or with a broad selection of supports for wider bench
dimensions. Due to ventilation slots in the steel panel and in the lower
side of the body the bench even could be placed directly to walls without
causing heat accumulation.
8.10
technical details are subject to change without notice | www.hera.de
8. 19" BENCH RACKS WITH 19“ MODULES AND CASSETTES
PROFI 19" BENCH RACK SUPERSTRUCTURE 4HE AND 7HE
• Suspended, light grey body with tilted front, made of 19mm thick melamine resin covered chipboard.
• Sides with cutouts for PROFI extensions.
• Lower side with ventilation insert.
• Closed, sectioned and detachable rear panel.
• 19" HE panel sections with raster profile, cage nuts and guiding rails.
• Right and left side with module sections.
• 3phase central wiring of the sections with rear side aluminium channel and integrated Schuko sockets, hera couplers and connector block.
• Front panel made of sheet steel (powder coated
according to RAL-No.) with ventilation slots.
470mm
PROFI 19" Bench Rack Superstructure
287mm
215mm
420mm
350mm
470mm
420. BB A . F 01
BB Width / Equipment
A Version
F Extension
13
1295mm / 2x Modules + 2x HE Panels
0
7HE / Standard
3
ENGERGY
15
1500mm / 2x Modules + 2x HE Panels + Shelf
1
7HE / ESD
9
SINGLE/ MULTI
16
1600mm / 3x HE Panels (only for SINGLE/ MULTI)
4
4HE / Standard
18
1800mm / 2x Modules + 3x HE Panels
5
4HE / ESD
20
2000mm / 2x Modules + 3x HE Panels + Shelf
23
2303mm / 2x Modules + 4x HE Panels
50
Corner 1213 x 1213 / 2x HE Panels
www.hera.de | technical details are subject to change without notice
8.11
8. 19" BENCH RACKS WITH 19" MODULES AND CASSETTES
EASY 19" BENCH RACK
• Light grey body made of 19mm thick melamine resin covered chipboard.
• Sides with cutouts for PROFI extensions.
• Detachable, powder coated rear panel made of
perforated steel with two cable glands.
• 19“ HE panels sections with raster profile, cage nuts and guiding rails.
• Right and left side with module sections.
• 3phase central wiring of the sections with rear side aluminium channel and integrated Schuko sockets, hera couplers and connector block.
PROFI
EASY 19"
19" Einschub
Bench Rack
Tischrack
420.
420. BB H .. F 00 A
BB Width / Equipment
H Height
F Extensions
A Version
13
1295mm / 2x Modules + 2x HE Panels
4
4HE / 215mm
0
no cutout
0
Standard
15
1500mm / 2x Modules + 2x HE Panels + Shelf
7
7HE / 355mm
1
SINGLE / MULTI
5
ESD
16
1600mm / 3x HE Panels
2
ENGERGY
18
1800mm / 2x Modules + 3x HE Panels
20
2000mm / 2x Modules + 3x HE Panels + Shelf
23
2303mm / 2x Modules + 4x HE Panels
50
Corner 1213 x 1213 / 2x HE Panels
EASY 19" BENCH RACK WITH EP
• Light grey body with tilted front made of 19mm thick melamine resin covered chipboard.
• Parallax-free 19" sections 7HE with raster profile, cage nuts and guiding rails.
• Right and left side with module sections.
• Below the 19“ section with section for EP modules 3HE. • Detachable, powder coated rear panel made of
perforated steel with two cable glands.
• 3phase central wiring of the sections with rear side aluminium channel and integrated Schuko sockets, hera couplers and connector block.
• Depth: 470/ 410mm, height: 510mm
EASY 19“ Bench Rack with EP
see
chapter 7 for EP modules
420. BB 0.50 A
BB Width / Equipment
8.12
A Version
13 1295mm / 2x Modules + 2x 7HE Panels + 4,5EP
18 1800mm / 2x Modules + 3x 7HE Panels + 6EP
0
Standard
15 1500mm / 2x Modules + 2x 7HE Panels + Rest + 5EP
20 2000mm / 2x Modules + 3x 7HE Panels + Rest + 7EP
5
ESD
16 1600mm / 3x 7HE Panels+ 5,5EP
23 2303mm / 2x Modules + 3x 7HE Panels + 8EP
technical details are subject to change without notice | www.hera.de
8. 19" BENCH RACKS WITH 19“ MODULES AND CASSETTES
19" PROFI MOBILE RACK
• Light grey rack made of 19mm melamine resin covered chipboard.
• Sides with fixing holes.
• Rear panel made of powder coated perforated sheet steel with two cable glands.
• 19“ HE Panels sections with raster profile, cage nuts and guiding rails.
• Rear side connecting rail with Schuko sockets.
• Width: 523mm, depth: 468mm
19" PROFI Mobile Rack 420.06 H .000
H Height
2
216mm / 4HE
6
661mm / 14HE
3
351mm / 7HE
8
973mm / 21HE
4
483mm / 10HE
PROFI Mobile with 19" Rack 7HE
www.hera.de | technical details are subject to change without notice
PROFI Cart with 19" Rack 10HE
8.13
8. 19" BENCH RACKS WITH 19" MODULES AND CASSETTES
19" CONTAINER RACK
• Light grey rack made of 19mm thick melamine resin covered chipboard.
• Front with recessed 19“ section with raster profile, cage nuts and guiding rails.
• Optionally with sideways service flap.
• Rear side connecting rail with Schuko sockets.
• Fixed rear panel, upper and lower side with cable
access, optionally this could be replaced by ventilation insert.
• Width: 523mm.
G Container
19" Suspended Rack with top-side mounting
holes
19“ Container Rack
47 G . T HH .0 R
G Container
19" Mobile Rack with 70mm swivel casters
total height = height + 130mm
19" Pedestal Rack with Base and Levelers
total height = height + 60mm
A
T Depth
HH Equipment / Height
2
Suspended Rack
5
580mm
3
Pedestal Rack
6
680mm
07
7HE / 355mm
4
Mobile Rack
7
780mm
12
12HE / 580mm
04
14HE / 670mm
21
21HE / 985mm
left
0
Standard
1
right
5
ESD
3
none
0
4HE / 220mm
14
A Version
R Service Flap
DOOR FOR 19" CONTAINER RACK
• Wooden door made of 19mm thick melamine resin covered chipboard, sides ergonomically bevelled. Upper and lower side with 2mm PP plastic edge.
T Door
• Glass door made of 6mm single-pane safety glass.
• Metal hinges 90° opening.
• Metal handles, lock with two keys (master key system).
wooden door
Door for 19" Container Rack
8.14
glass door
475. T HH .00 A
T Door
HH Height
0
Wooden Door
04
5
Glass Door
4HE / 220mm
07
7HE / 355mm
12
12HE / 580mm
A Version
14
21
14HE / 670mm
0
Standard
21HE / 985mm
5
ESD
technical details are subject to change without notice | www.hera.de
8. 19" BENCH RACKS WITH 19“ MODULES AND CASSETTES
PROFI 19" RACK
• Very sturdy rack, design and technology in accordance with the PROFI benches.
• Corners made of the PROFI profile SINGLE with
durable powder coating according to RAL-No.
• Front with recessed 19“ panel sections with raster profile, cage nuts and guiding rails.
• Cover and bottom made of solid steel frame with
durable powder coated sheet steel panels in light grey.
• Optionally with 4 heavy duty steering casters (height + 90mm) for mobile applications or 4 height adjusters (height + 20mm).
• Rear side with lockable sheet steel door with
durable light grey powder coating. Lower side with cable access.
• Detachable sides made of sheet steel with durable light grey powder coating.
• Width: 610mm.
PROFI 19" Rack
T Depth
470. T HH .901
HH Height
0
645mm
14 14HE / 670mm
34 34HE / 1570mm
1
800mm
16 16HE / 760mm
38 38HE / 1750mm
2
900mm
20 20HE / 840mm
43 43HE / 1970mm
3
1000mm
25 25HE / 1160mm
47 47HE / 2150mm
29 29HE / 1340mm
471.000.000
Casters (4x steering twin casters Ø: 75mm,
two with brakes, max. load 300kg
471.000.100
Set of height adjusters
Set (2 pcs.) Guiding Rails made of Anodized Sheet Steel
471.000.150
for depth: 645mm
471.001.150
ffor depth: 800mm
471.002.150
for depth: 900mm
471.003.150
for depth: 1000mm
GLASS DOOR FOR PROFI 19" RACK
• Anodized aluminium frame with perspex insert.
• Hinges (optionally left or right) and lock.
Glass Door for PROFI 19" Rack
471.0 HH.000
HH Height
14HE / 670mm
25
16
16HE / 760mm
20
20HE / 1160mm
14
34HE / 1570mm
38
34HE / 1570mm
29
38HE / 1750mm
43
38HE / 1750mm
34
43HE / 1970mm
47
43HE / 1970mm
www.hera.de | technical details are subject to change without notice
8.15
8. 19" BENCH RACKS WITH 19" MODULES AND CASSETTES
19" KEYBOARD DRAWER WITH TRACKBALL OR TOUCHPAD
• 19" drawer with integrated keyboard.
19" Keyboard Drawer with Trackball or Touchpad
377.070.200
1HE
19" DRAWER
• Sheet steel drawer with telescopic rails.
Aluminium front with lock and handle strip, light grey powder coated.
19“ Drawer
341.009.200
2HE
341.009.300
3HE
341.009.400
4HE
CARRYING CASE FOR 19" DEVICES
• Powder coated sheet steel housing with fold-down handles (3HE without handle), incl. reinforced sides. With slotted rear and bottom.
• Incl. power cord and guiding rails.
• Depth: 490mm.
Carrying Case for 19" Devices
394.0 HH .500
HH Height
3HE
07
7HE
04
4HE
10
10HE
06
6HE
03
FOLDING TABLE FOR PROFI RACK
• Light grey 19mm thick melamine resin covered chip-
board with 3mm PP plastic edge.
• Solid folding mechanism, assembled to the PROFI legs.
• Dimensions: 400 x 630 x 200mm (WxDxH).
Folding Table for PROFI Rack
479.000.000
8.16
pcs.
technical details are subject to change without notice | www.hera.de
8. 19" BENCH RACKS WITH 19“ MODULES AND CASSETTES
POWER CORD
• Flexible plastic covered cables with ready to use
connection.
Power Cord
291.001.100
5m (3x 1,5mm²) with open ends
291.001.500
5m Emergency Off Cable (2x 1,5mm²), open end
291 001.150
5m (5x 2,5mm²) with open ends
291.001.550
3m Emergency Off Cable (2x 1,5mm²), open end
291.001.200
5m (3x 1,5mm²) with angled Schuko plug
291.001.603
3m Patch Cable grey with 2x RJ45 plug CAT6
291.001.250
5m (5x 2,5mm²) with angled Schuko plug
291.001.605
5m Patch Cable grey with 2x RJ45 plug CAT6
291.001.300
5m (5x 2,5mm²) with CEE plug 16A red
291.001.610
10m Patch Cable grey with 2x RJ45 plug CAT6
291.001.350
5m (5x 6mm²) with CEE plug 32A red
291.001.400
5m (3x 1,5mm²) with CEE plug 3poles blue
CABLE GLAND FOR BENCH RACK
• Cutout in bench rack for internally mounted light grey powder coated aluminium panel with two cable glands.
• Incl. assembly set.
Cable Gland for Bench Rack
291.002.000
Squared Cutout with Plastic Edges
(100 x 100mm)
291.002.200
Round Cutout with Cable Access
LAMP ADAPTER FOR BENCH RACK
• Plastic sleeve, flush mounted into the top plate.
• Adapter diameter: 13mm.
Lamp Adapter for Bench Rack
291.003.100
TOPMOUNT SOCKET WITH FLAP
• Schuko socket with white flap, flush mounted into the wooden body and connected to the central power supply.
Topmount Socket with Flap
291.002.000
2x Socket with Flap
291.002.200
4x Socket with Flap
www.hera.de | technical details are subject to change without notice
8.17
8. 19" BENCH RACKS WITH 19" MODULES AND CASSETTES
SIGNAL LAMP
• Signal lamp with post, diameter: 70mm.
• Red, green and/ or yellow light element 230V.
• Installed on the bench rack and wired to the mains panel.
• Incl. power cord.
Signal Lamp
331.03 A . L 00
A Lamp Elements
8.18
L Type
1
1x Element (red)
1
Filament Lamp 5W
2
2x Element (red/ green)
3
LED Continuous Lamp
3
3x Element (red/ green/ yellow)
technical details are subject to change without notice | www.hera.de
8. 19" BENCH RACKS WITH 19“ MODULES AND CASSETTES
PLENTY OF STORAGE FOR YOUR
MEASURING CORDS AND CABLES
There are different features for the bench racks of our 19“ system, like
brush channels or cable clearance rakes. This helps you to keep your
workstation clear of cables. If, however, the great complexity of electrical
devices calls for an even more spacious cable management, we introduce
you to our cable clearance flap and cable clearance drawer. Both solutions
guarantee organized workstations even if working with lots or long
measuring leads.
www.hera.de | technical details are subject to change without notice
8.19
8. 19" BENCH RACKS WITH 19" MODULES AND CASSETTES
BRUSH CHANNEL
• Cable channel covered by a brush strip for the flexible cable run in parallel to the PROFI extensions.
• The brush channel enables clear cable runs even for short termed tests.
• Made of sheet steel with light grey powder coating.
• Incl. assembly set for the fixation to the PROFI profile.
• Dimensions: 40 x 70mm (WxD).
Brush Channel 401.0 HH.901
HH Height
03
300mm
08
800mm
04
400mm
09
900mm
05
500mm
10
1000mm
06
600mm
11
1100mm
07
700mm
12
1200mm
CABEL CLEARANCE RAKE
• The cable clearance rake is for structurally arranged cables from the bench rack to the bench top, it could be installed directly under the bench rack. Additionally it could be used with magnets for hanging up plans and drawings.
• Made of sheet steel with light grey powder coating.
• With slots for cables and mounting holes.
•Dimensions: 60 x 35mm (DxH).
Cable Clearance Rake
424. BB 9.0 K 0
BB Width
8.20
K Extensions
05
500mm
13
1295mm
0
none
06
603mm
15
1500mm
2
SINGLE/MULTI
08
800mm
16
1600mm
09
900mm
18
1800mm
10
1000mm
20
2000mm
12
1200mm
23
2303mm
(-80mm)
4
ENERGY
(-200mm)
technical details are subject to change without notice | www.hera.de
8. 19" BENCH RACKS WITH 19“ MODULES AND CASSETTES
CABLE CLEARANCE FLAP
• For the acceptance of very long measuring leads, which would block precious space on the bench top.
• Suitable for the modular assembly under the 19“ bench racks for HE panels and cassettes.
• Body made of 19mm thick melamine resin covered chipboard, sides with openings for continuous cable run into the exensions or brush channel.
• Sectioned flap with rubber lip and easy push-locks.
•Dimensions: 390 x 40/ 110mm (WxH).
Cable Clearance Flap
420. BB 9.5 K 0
BB Bench Width
05
K Extensions
1600mm
0 SINGLE/ MULTI (-80mm)
18
1800mm
1
ENERGY (-200mm)
20
2000mm
23
2303mm
500mm
10
1000mm
16
06
603mm
12
1200mm
08
800mm
13
1295mm
09
900mm
15
1500mm
CABLE CLEARANCE DRAWER
• For the acceptance of very long measuring leads, which would block precious space on the bench top.
• Suitable for the modular assembly under bench racks, energy boards and shelves.
• Sheet steel drawer with ballbearing guided telescopic full extension. Durable, light grey powder coated.
•
Sides made of 19mm thick melamine resin covered light grey chipboard. Sides with 60mm cable access for a hidden cable run into the brush channel and into the cable tray.
• Front made of 19mm thick melamine resin covered light grey chipboard with rubber lip and lock.
•Dimensions: 390 x 85mm (WxH).
Cable Clearance Drawer
420. BB 0.0 K 5
BB Bench Width
05
K Extensions
1600mm
0 SINGLE/ MULTI (-80mm)
18
1800mm
ENERGY (-200mm)
1
20
2000mm
23
2303mm
500mm
10
1000mm
16
06
603mm
12
1200mm
08
800mm
13
1295mm
09
900mm
15
1500mm
www.hera.de | technical details are subject to change without notice
8.21
8. 19" BENCH RACKS WITH 19" MODULES AND CASSETTES
GREAT VARIETY OF
CASSETTES AND PANELS
On following pages we introduce you to our big range of high technology
cassettes and panels in the standardized 19“ system. With our program we
sufficiantly cover all fields within the electronics. All devices are of
highest quality and in accordance with applicable standards.
8.22
technical details are subject to change without notice | www.hera.de
8. 19" BENCH RACKS WITH 19“ MODULES AND CASSETTES
19" TE BLANK PANEL AND BLANK CASSETTE
• Aluminium front panel, light grey matt powder coated with fixing screws.
Cassette additionally with:
• Abrasion proofed and chemical resistant silkscreen printing.
• Side panels made of anodized aluminium with slots for the acceptance of PCBs in european standard size.
• Width: in 7x TE raster (TE = 5,08mm).
• Rear panel made of aluminium with H15 connector.
• Height: 3HE (128mm).
• Depth: 290mm.
Blank Panel/ Blank Cassette
• Handle bar.
340.0 HH . A 02
HH Height
A Type
07 7TE (only blank panel)
28 28TE
49 49TE
1
Blank Panel
14 14TE (only blank panel)
35 35TE
56 56TE
2
Blank Cassette
21 21TE
42 42TE
84 84TE
19" HE BLANK PANEL, BLANK MODULE AND BLANK INSERTION
• Aluminium front panel, light grey matt powder coated with fixing screws.
• Abrasion proofed and chemical resistant silkscreen printing.
• Width: 19" (483mm); module: 115mm
• Height: in HE-Raster (HE = 44,45mm)
19" HE
Blank Panel Blank Module
1HE
340.001.302
2HE
340.002.302
3HE
340.003.302
4HE
340.004.302
5HE
340.005.302
6HE
340.006.302
7HE
340.007.302
1HE with venti-
340.021.302
Insertion additionally with:
• Two metal handles.
• Chassis with chormated side panels with hole strip, bottom with mounting plate and top with ventilation slots.
• Chromated rear panel with 1m connecting cable with Schuko plug.
Blank Insertion
• Depth: 360mm.
340.003.402
331.000.402
340.004.402
340.006.402
331.000.302
340.007.402
lation slots
www.hera.de | technical details are subject to change without notice
19“ Blank Insertion 4HE
19“ Blank Module
7HE
8.23
8. 19" BENCH RACKS WITH 19" MODULES AND CASSETTES
19" INSTALLATION PANEL
• Panel with installation box for the flexible equipment with installation
components.
Installation Panel 21TE
340.220.102
Suitable Installtaion Components and Covers, white
333.220.500
Cover
333.220.510
TV-Antenna-Socket 2-holes
333.220.520
SAT-Antenna-Socket 3-holes
333.220.530
Double-UAE-Socket RJ45
333.220.540
TAE-Socket 6F
333.220.550
red Schuko socket with Label
19" PANEL WITH EMERGENCY OFF BUTTON
2•
19“ aluminium front panel, light grey matt powder coated with abrasion proofed silk screen printing and fixing screws.
• Equipped with emergency off button and second
unwired opener contact to inhouse emergency off circuit.
Emergency Off Button
Rotation Release
Key Release
14TE
331.006.102
331.016.102
21TE with
protective collar
331.006.202
331.016.202
7HE
331.006.302
331.016.302
4HE
331.006.402
331.016.402
7HE with
3x Schuko
331.007.302
331.017.302
8.24
technical details are subject to change without notice | www.hera.de
8. 19" BENCH RACKS WITH 19“ MODULES AND CASSETTES
19" Mains Supply 16A
• For the central protection of the complete bench rack.
• Voltage control lamps.
• Motor protective switch 12,5-16A with under voltage release.
•
Residual current device (RCD) 25A/ 30mA type A or sensitive to all currents type B (recommended for training facilities with experimental equipment
according to VDE 0100-723).
331.460.102
Mains Module 4HE
• Emergency Off button with rotation or key release, yellow signal ring and opener contact.
• The 2HE type 1phase with Schuko socket and 3phase with CEE socket.
331.165.102
Mains Module 7HE
331.065.102 Mains Cassette 35TE
331.265.102 Mains Panel (Insertion 2HE)
331.077.102 Mains Cassette 42TE
Mains Supply 16A
331. S
331.177.102
Mains Module 7HE
331.277.102 Mains Panel (Insertion 2HE)
P
T . N 02
S System
P Phases
T Type RCD
(sensitive to...)
N Emergency Off
0
19" Cassette 21-42TE
6
1phase 230V
0
no RCD
0
no Emergency Off
1
19" Module 7HE
7
3phase 400V
5
pulsating currents type A
1
with Rotation Release
2
19" Insertion 2HE
7
all currents type B
2
with Key Release
4
19" Module 4HE
3
Black Mushroom Button with Key Release
www.hera.de | technical details are subject to change without notice
8.25
8. 19" BENCH RACKS WITH 19" MODULES AND CASSETTES
19" MAINS SUPPLY 32A
•
Voltage control lamps.
•
CEE socket 32A.
•
Motor circuit breaker 32A with under voltage release.
•
5x safety jacks.
•
Residual current device 40A / 30mA, type A or
type B for sensitive to all currents.
•
Output protected by motor circuit breaker 16A.
•
Emergency Off button with opener contact.
Mains Panel 32A
331.37 T . N 02
3HE
T Type RCD
N Emergency Off
0
no RCD
0 no Emergency Off
5
pulsating currents type A
1 with Rotation Release
7
all currents type B
2 with Key Release
3 Black Mushroom Button with Key
Release
19" DIDACT MAINS SUPPLY
The didact mains supply is with enabling function by switch
or USB / LAN interface (REMOTE type). The REMOTE type
is with emergency off status memory and two unassigned
contacts (e.g. for hiedeaway or foldaway mechanism).
•
Residual current device 25A / 30mA type A or sensitive
to all currents type B.
•
Automatic circuit breaker B16.
•
Voltage control lamps.
•
1- or 2-level-activation with on/ off button, contactor
and status indication.
•
Completely wired with input to serial strip and output to
H15 connector.
•
REMOTE type with rear side USB or LAN interface incl.
LabView driver and operating software.
331.530.002
Mains Cassette 28TE
331.515.002
Mains Cassette 28TE
331.537.202 Mains Cassette 28TE
REMOTE Type (central control)
USB Interface
LAN Interface
Didact Mains Supply
331. S
P
T. F
331.630.002
Mains Module 7HE
R2
S System
P Phase
T RCD
F Activation
R Remote
5
19" Cassette 21-56TE
1
1phase 230V
0 no RCD
0
1 level with on button + off
0
no Interface
6
19" Module 7HE
3
3phase 400V
5 pulsating currents type A
button
3
USB Interface
1 level with On and Off
5
LAN Interface
(sensitive to...)
7 all currents type B
1
button and Key
2
2 level with On and Off
button and Key
8.26
technical details are subject to change without notice | www.hera.de
8. 19" BENCH RACKS WITH 19“ MODULES AND CASSETTES
SIMPLE WAY TO
KEEP TRACK OF EVERYTHING
Instructors bear a great deal of responsibility. For this reason it is most
important to eliminate any risk within an electronic laboratory. hera offers
different possibilities for central protection and control from the instructors
bench. Activation and deactivation is either done with key combination at
the distribution panel in the instructors bench, radio remote controlled or at
the PC with LAN or USB interface.
www.hera.de | technical details are subject to change without notice
8.27
8. 19" BENCH RACKS WITH 19" MODULES AND CASSETTES
19" CONTROL UNIT FOR INSTRUCTOR BENCHES
•
19“ panel for the integration in the distribution rack of
the instructor bench for the central protection of a
complete laboratory, power distribution, protection of
single workstations and control of student
workstations.
Below components are available and could be
modular combined:
MSS 40A:
Motor circuit breaker 40A with under
voltage release for the connection of all
emergency off buttons.
FI:
Residual current device 300mA/ 40A
sensitive to all currents type B.
Activation:
Key switch for the activation of the
mains panel.
PhKo:
3x phase control lamps.
Automat B16:
Automatic circuit breaker B16 for 1phase
protection of all workstations.
MSS 12,5-16A: Motor circuit breaker 12,5-16A for the
3phase protection of all workstations.
332.090.102 Mains Panel 3HE MS40A; RCD, Activation; PhKo; Automat
332.090.202 Distribution Panel: 3HE: 17x Automat B16
Control Unit for Instructor Bench
332.090.100 Mains Panel MS40A; Activation; PhKo; B16 3HE
332.090.102 Mains Panel MS40A; FI, Activation; PhKo; B16 3HE
332.090.108 Mains Panel with Distribution MSS40A; Activation; PhKo
9x Automat B16 (8x Student + 1x Instuctor) 3HE
332.090.110 Mains Panel with Distribution: MSS40A; FI; Activation;
Phko; 9x Automat B16 (8x Student + 1x Instructor) 3HE
332.090.201 Distribution Panel: 8x MSS410-16A 6HE
332.090.202 Distribution Panel: 17x Automat B16 3HE
332.090.201 Distribution Panel: 6HE: 8x MSS410-16A
19“ STUDENT BENCH CONTROL
For the central control of the student benches with following
media:
•
Key combination at the 19“ distribution rack.
•
Radio remote controlled.
•
At the PC via LAN networked.
332.090.301 19“ Panel 3HE with 1 + 8x On/ Off button
Following functions could be remote controlled:
•
On/ off for multiple levels (low voltage, mains voltage/
soldering iron, etc.)
•
Up/ down for foldaway/ hideaway bench racks.
•
Emergency off monitoring.
332.090.920 Receiver with 2
channels (relay output)
Student Bench Control
332.090.301
19" Panel with 1+8x On/ Off key combination with control
lamp 3HE
332.090.800 Handheld radio transmitter 8 channels
332.090.850
Handheld radio transmitter 32 channels (8x4 levels)
332.090.920
Radio receiver 2 channels (relay output)
332.090.940
Radio receiver 4 channels (relay output))
332.090.400
LAN-Panel: adressable RJ45 Ethernet connector with
4x relay outputs and 4x potential-free inputs
8.28
332.090.400 LAN-Module: adressable
RJ45 Ethernet connector wirh 4x ralay outputs
and 4 potential-free inputs
technical details are subject to change without notice | www.hera.de
8. 19" BENCH RACKS WITH 19“ MODULES AND CASSETTES
19" SOCKET PANEL
19“ aluminium front panel light grey with abrasion proofed
silkscreen printing and H15 connector, completely wired.
• Schuko socket grey, 45° positoned.
• Depending on the type with or without illuminated switch, 2poles and 4mm safety jacks (L, N, PE).
Schuko Socket Panel
340.330.202 2x Schuko 14TE
340.335.202 4x Schuko 28TE
340.330.102 2x Schuko with Switch 21TE
340.335.102 4x Schuko with Switch 35TE
340.121.102 1x Schuko with Switch and Safety Jacks 14TE
340.221.102 3x Schuko with Switch and Safety Jacks 28TE
19" SOCKET MODULE
19“ aluminium front panel light grey with abrasion proofed
silkscreen printing and H15 connector, completely wired.
• Schuko socket grey, 45° positoned.
• Illuminated switch, 2poles.
Schuko Socket Module
331.007.352
3x Schuko with additional switch for overhead light 7HE
331.021.302
3x Schuko 7HE
331.021.402
3x Schuko 4HE
19" SCHUKO SOCKET PANEL
• 5x Schuko sockets grey, 45° positioned.
• 3x 4mm safety jacks (L, N, PE).
• Illuminated switch, 2poles.
Schuko-Steckdosen
Schuko
Socket Panel
341.402.102
2HE
www.hera.de | technical details are subject to change without notice
8.29
8. 19" BENCH RACKS WITH 19" MODULES AND CASSETTES
19" CASSETTE AND PANEL WITH ISOLATED TRANSFORMER
• Ferrit core transformer for the supply of a floating AC voltage 230V.
• Protected by a front side operated thermomagnetic fuse.
• Output on universal socket (Schuko, Franco-American) without earth contact.
• Illuminated switch, 2poles.
Some cassettes/ panels with:
• Schuko socket grey; 45° positioned.
• 2poles selector switch to change between sockets and 4mm safety jacks (SLB).
Isoltated Transformer
340.535.102
19“ Cassette 700VA/ 3A + Selector for Safety Jacks + 2x Schuko Sockets 35TE
340.535.122
19“ Cassette 115VA/ 0,5A + Selector for Safety Jacks SLB 14TE
331.024.302
19” Module 700VA/ 3A 4HE
331.025.302
19” Module 700VA/ 3A + 2x Schuko Sockets 7HE
341.503.102
19“ Panel 700VA/ 3A + Selector for Safety Jacks + 4x Schuko Sockets 3HE
341.503.202
19“ Panel 3700VA/ 16A + Selector for Safety Jacks + 4x Schuko Sockets 4HE
19" CASSETTE AND PANEL WITH CEE SOCKET
• CEE socket 5poles red 400V/ 16A 6h.
• 4mm safety jacks (SLB).
• Schuko sockets grey; 45° positioned.
• Illuminated switch, 2poles and contactor.
CEE Sockets
340.242.502
19" Cassette without Switch 21TE
340.242.302
19" Cassette with Switch + Schuko 35 TE
331.202.302
19" Module without Switch 4HE
331.202.352
19" Module with Switch 4HE
331.203.302
19" Module without Switch + 2x Schuko 7 HE
331.203.352
19" Module with Switch + 2x Schuko 7HE
341.203.302
19" Panel without Switch + 4x Schuko 2HE
341.203.352
19" Panel with Switch + 4x Schuko 2HE
8.30
technical details are subject to change without notice | www.hera.de
8. 19" BENCH RACKS WITH 19“ MODULES AND CASSETTES
19" PANEL WITH MULTI MEASURING UNIT
•
The panel is for the display of voltage, current and
power of connected AC consumers.
•
Multifunctional display with graphic-LCD display and 4
variably programmable readings and four switches.
•
Optional with front side connectable USB interface or
back side connectable LAN interface.
•
CEE socket straight 400V/ 16A, 6h, 5poles.
•
4mm safety jacks (L1, L2, L3, N and PE).
•
Schuko socket, grey 45° positioned.
•
Illuminated switch, 2poles and contactor.
Panel with Multi Measuring Unit
REMOTE Type (central readable)
USB Interface
LAN Interface
34 S .389.50 R
S System
R Remote
0
19“ Cassette 35TE
2
no Interface
1
19“ Panel 3HE
7
USB Interface
8
LAN Interface
Technical details of Multi Measuring Unit:
•
Instrument 96 x 96mm with graphic-LCD-display
128 x 80 Pixel and 4x switches for operation.
•
HIGH and LOW values of the actual voltage -, current -,
power -, PF - and frequency vaulue.
•
Voltages TRMS (phases-, system- and interconnected
voltages); accuracy: ±0,2%.
•
Total harmonic distortion (THD) of voltages and
currents.
•
Phase current TRMS (calculated current of neutral
contactor); Accuracy: ±0,2%.
•
Harmonic analyses of voltage and current up to the 31
harmonic wave.
•
Power (active, reactive, apparent power
of phase and in total); accuracy: ±0,5% v. EW.
•
•
P.F. (power factor each phase and in total);
accuracy: ±0,5%.
Counter for active -, reactive -, and apparent energy
(partial and total counter with programmable tariff
functions).
•
Hour counter (counter for total and service hours,
programmable).
•
Frequency (frequency measuring of the measured
voltage); accuracy: ±0,05%.
www.hera.de | technical details are subject to change without notice
8.31
8. 19" BENCH RACKS WITH 19" MODULES AND CASSETTES
19" CASSETTE WITH TEST SPEAKER
• Test speaker 50 Watt/ 8Ω
Transmission range: 130-20.000 Hz.
• Upstream connected transmitter for impedance
matching.
Transmission range: 40 - 20.000Hz
Primary winding: 2,5kΩ / 5kΩ / 10kΩ;
Secundary winding: 4Ω / 8Ω / 16Ω
• Connection with 4mm safety jacks.
Test Speaker
380.090.302
19“ Cassette 35TE
19" CASSETTE WITH CONTINUITY TESTER
High-ohmic, electronic continuity tester, poled:
• Resistance range: 0...200kΩ with accoustic signal
(sound alternation with changing resistance) and optical signal.
• Residual current protection (> 400V) and LED indication.
Electric continuity tester for low-ohmic tests with
24VAC.
• LED indication.
• Connection with 4mm safety jacks.
• Illuminated switch, 2poles for central on/off.
Continuity Tester
380.020.202
8.32
19“ Cassette 21TE
technical details are subject to change without notice | www.hera.de
8. 19" BENCH RACKS WITH 19“ MODULES AND CASSETTES
19" PANEL SELECTIVE POLES
•
Selective poles are used for loop wirings in class rooms or training centers, if the teacher provides voltages for the class. Selective poles are not
connected, wiring has to be done on-site.
Equiped with:
• 4mm safety jacks (SLB).
• BNC sockets.
19" Panel Selective Poles
380.090.052
5x Safety Jacks 7TE
380.090.102
12x Safety Jacks + 2x BNC Sockets 21TE
19" PANEL WITH INTERFACE
Front panel with integrated interface and cable.
19“
Platte
Panel
withSchnittstellen
Interface
340.614.302
2x RJ45 Socket CAT5 7TE
340.614.342
1x RJ45 Socket CAT6 7TE
340.614.362
2x RJ45 Socket CAT6 7TE
340.614.352
1x RJ45 fixed connection (displaced insulation CAT6 7TE
340.615.102
1x Sub-D 9poles Plug for COM / RS232 7TE
340.615.302
1x Sub-D 25poles Sccket for LPT 7TE
340.615.502
1x Sub-D 15poles Socket for VGA 7TE
340.615.702
1x DVI-I-Socket (Digital Visual Interface) 7TE
340.615.902
2x PS/2-Socket (Keyboard + Mouse - Interface) 7TE
340.616.102
3x Chinch-Socket (red, white, yellow) 7TE
340.616.302
1x Audio Jack 3,5mm 7TE
340.616.502
1x HDMI (High Definition Multimedia Interface) 7TE
340.617.302
Active 4x USB-Hub 2.0 incl. supply unit 14TE
340.617.402
Active 4x USB-Hub 3.0 incl. supply unit 14TE
340.617.702
Card Reader USB 2.0 14TE
for: CF types, MS types, SM types, SD/SDHI types,
Micro SD (T-Flash) types
www.hera.de | technical details are subject to change without notice
8.33
8. 19" BENCH RACKS WITH 19" MODULES AND CASSETTES
19“ SOLDERING STATION, ANALOGUE
• Professional soldering station 24V/ 80W
with electronic temperature regulation.
• Stepless adjustable temperature by potentiometer
between 150°C and 450°C with LED temperature
indication.
• Antistatic soldering iron (24V/ 80W).
• Holder with sponge.
• Illuminated switch, 2poles for central on/off.
• Coupler for soldering fume extractor.
Soldering Station, analogue
380.001.102
19“ Cassette 21TE
380.253.102
19“ Module 7HE
19“ SOLDERING STATION, DIGITAL
• Microprocessor controlled soldering station with
automatic soldering tool cognition.
• Stepless at two buttons adjustable temperature
between 50°C and 450°C.
• 3digit LED display for actual and set temperature
indication.
• Antistatic soldering iron (24V/ 80W).
• Holder with sponge.
• Illuminated switch, 2poles for central on/off.
• Coupler for soldering fume extractor.
Soldering Station, digital
380.001.602
19“ Cassette 28TE
380.253.602
19“ Module 7HE
8.34
technical details are subject to change without notice | www.hera.de
8. 19" BENCH RACKS WITH 19“ MODULES AND CASSETTES
19“ SOLDERING AND DESOLDERING REPAIR STATION UNIVERSAL
• Universal applicable 2 channel repair station for
professional repairs of industrial PLCs, as well as
generally for service and repair departments.
• The station has two independent channels for
automatic tool cognition and automatic activation
of the respective control parameter. Soldering and desoldering or soldering with hot air could be done simultaneously.
• All accessories like soldering iron, desoldering iron and hot air pencil could be connected.
• Integrated rotary pump for vacuum and air flow (max. suction 0,7 bar; max. air flow 18 l/min).
• Variably programmable buttons for repeated functions.
• LC display.
• EGB safe.
• ECO button.
• Temperature regulation: 50°C – 550°C.
• For a variety of soldering tools up to 200 Watt.
Soldering and Desoldering Repair Station UNIVERSAL
380.001.502
19“ Cassette 42TE
341.254.102
19“ Panel 2HE
Soldering Tool Set
www.hera.de | technical details are subject to change without notice
Deoldering Tool Set
Accessory to Repair Station UNIVERSAL
380.000.100
Soldering Tool Set 80 Watt
(Soldering Iron, Safety Holder)
380.000.200
Soldering Tool Set 120 Watt
(Soldering Iron, Safety Holder)
380.000.300
Desoldering Tool Set 80 Watt
(Desoldering Iron, Safety Holder, Cleaning Set)
380.000.400
Desoldering Tool Set 120 Watt (Desoldering Iron)
380.000.500
Hot Air Pencil Set 100 Watt
(Hot Air Pencil, Safety Holder, Nutdriver for Nozzle
Changing)
Hot Air Pencil Set
8.35
8. 19" BENCH RACKS WITH 19" MODULES AND CASSETTES
19" CASSETTE R-DECADE
• 8x decade switches with precision resistors in the ranges of 1Ω, 10Ω, 100Ω, 1kΩ, 10kΩ, 100kΩ, 1MΩ, 10MΩ.
• Accuracy: 0,1% + 100mΩ.
• Max. voltage: 200V AC; max. current: 0,5A.
• 9 x 4mm safety jacks for resistance taps.
R-Decade
380.002.102
19“ Cassette 35TE
19“ CASSETTE C-DEKADE
• 8x decade switches with precision capacitors in the ranges of 100pF, 1nF, 10nF, 100nF, 1µF.
• Accuracy: 0,1% + 75pF.
• Max. voltage: 200V AC; max. current: 0,5A.
• 2 x 4mm safety jacks for capacity taps.
C-Decade
380.002.202
19“ Cassette 21TE
19“ CASSETTE L-DECADE
• 4x decade switches with precision coils in the ranges of 1µH, 10µH, 100µH, 1mH.
• Max. voltage: 100V.
• 2 x 4mm safety jacks for inductance taps.
L-Decade
380.002.302
8.36
19“ Cassette 21TE
technical details are subject to change without notice | www.hera.de
8. 19" BENCH RACKS WITH 19“ MODULES AND CASSETTES
19" PANEL WITH LOAD RESISTANCE
• Stepless adjustable rotational resistors 50W
(test voltage: 2,5kV).
• Thermic automatic circuit breaker for overload
protection.
• Connection at three safety jacks.
Load Resistance
380.005.102
0 - 10Ω / 2,2A 14TE
380.005.202 0 - 100Ω / 0,7A 14TE
380.005.302 0 - 1kΩ / 0,2A 14TE
380.005.402
0 - 10kΩ / 0,1A 14TE
380.005.002 3x Load Resistors 0 - 0,1 / 1 / 10kΩ 35TE
19" INSERTION WITH LOAD RESISTANCE
•
4x 50W
Four stepless adjustable load resistors
(test voltage: 2,5kV):
0 - 10Ω / 50W; 2,2A
0 - 100Ω / 50W; 0,7A
0 - 1kΩ / 50W; 0,2A
0 - 10kΩ / 50W; 0,1A
•
or 4x 300W
Four stepless adjustable load resistors
(test voltage: 2,5kV):
0 - 10Ω / 5,4A
0 - 100Ω / 1,7A
0 - 1kΩ / 0,5A
0 - 10kΩ / 0,2A
• Thermic automatic circuit breaker for overload protection.
• Each resistance with two end taps and center tap at 4mm safety jacks.
Load Resistance
380.010.102
4x 50W 3HE
380.010.302
4x 300W 4HE
www.hera.de | technical details are subject to change without notice
8.37
8. 19" BENCH RACKS WITH 19" MODULES AND CASSETTES
VARIABLE AC SOURCES
Our adjustable AC sources are ideal for the simulation of mains alternations.
Due to latest technology and a great performance variety, the devices are
not only applicable for education but also for service and development. Our
galvanic insulated types ensure even more accuracy and offer a great deal of
safety.
8.38
technical details are subject to change without notice | www.hera.de
8. 19" BENCH RACKS WITH 19“ MODULES AND CASSETTES
19" CASSETTE FLOATING AC LOW VOLTAGE, 1PHASE, PLUGABLE
• Variably programmable switch for repeating functions. Transformer with earthfree 10A outputs. Plugable to tap off 2V, 4V, 6V, 8V, 10V or 12V.
• Protected by front side operated thermomagnetic fuse.
• Output on 4mm safety jacks.
• Bridge rectifier at 4mm safety jacks.
• Illuminated switch, 2poles for central on/off.
AC Low Voltage, 1phase, plugable
342.012.102
no Bridge Rectifier 21TE
342.012.202
with Bridge Rectifier 35TE
19" CASSETTE WITH FLOATING AC LOW VOLTAGE
• Isolated transformer for 1V, 2V, 4V, 8V, 16V/ 5 A.
Protected by front side operated thermomagnetic fuse.
• 5x switches for voltage setting. The output voltage could be adjusted in 1V steps between 0...31V.
• Output on 4mm safety jacks.
• Illuminated switch, 2poles for central on/off.
AC-Kleinspannung
AC
Low Voltage, 1phase
342.031.102
19“ Cassette 35TE
19" CASSETTE WITH FLOATING AC LOW VOLTAGE, 3PHASE
• AC isolated transformer 345VA for a floating 3phase voltage 23V/ 40V.
• Protected by front side operated thermomagnetic fuse.
• Output on 4mm safety jacks.
• Illuminated switch, 2poles with contactor.
AC Low Voltage, 3phase
342.323.002
19“ Cassette 42TE
www.hera.de | technical details are subject to change without notice
8.39
8. 19" BENCH RACKS WITH 19" MODULES AND CASSETTES
19" CASSETTE VARIABLE AC SOURCE 0 - 260V/ 3A
• 1x variac with downstream connected isolated
transformer for 0…260V/ 3A, 0…60V/ 6A and
0…12V/ 15A.
• Protected by front side operated thermomagnetic fuses.
• Outputs on 4mm safety jacks.
• Bridge rectifier at 4mm safety jacks.
• Illuminated switch, 2poles for central on/off.
Variable AC Source 0 - 260V/ 3A
342.026.102
19“ Cassette 42TE
19" CASSETTE VARIABLE AC SOURCE 1PHASE
•
1x variac with downstream connected isolated
transformer for a floating output voltage between 0 - 100%. Protected by front side operated
thermomagnetic fuses.
• Output selector for 4mm safety jacks and universal socket (Schuko, Franco-American) without PE contact.
• Current - and voltage reading - analogue: moving iron class 1,5.
- digital: 3digit LED display TrueRMS,
Accuracy: 0,5% +/-1 digit.
• Illuminated switch, 2poles for central on/off.
Variable AC Source 1phase
342.271.202
0-270V / 1A analogue 63TE
342.271.602
0-270V / 1A digital 63TE
342.273.202
0-270V / 3A analogue 63TE
342.273.602
0-270V / 3A digital 63TE
19" CASSETTE VARIABLE AC/DC SOURCE 1PHASE
•
Variac with downstream connected isolated
transformer for a floating output voltage between 0 - 100%. Protected by front side operated
thermomagnetic fuses.
• Connectible bridge rectifier for a pulsating DC voltage with 48% ripple.
• AC - and DC output on 4mm safety jacks.
• Current - and voltage reading - analogue: moving iron class 1,5.
- digital: 3digit LED display TrueRMS,
Accuracy: 0,5% +/-1 digit.
• Illuminated switch, 2poles for central on/off.
Variable AC/DC Source 1phase
8.40
346.033.202
0-30V / 10A analogue 56TE
346.053.202
0-50V / 3A analogue 56TE
346.271.202
0-270V / 1A + 0-60V / 4A analogue 63TE
346.271.602
0-270V / 1A + 0-60V / 4A digital 63TE
346.273.202
0-270V / 3A + 0-60V / 10A analogue 70TE
346.273.602
0-270V / 3A + 0-60V / 10A digital 70TE
technical details are subject to change without notice | www.hera.de
8. 19" BENCH RACKS WITH 19“ MODULES AND CASSETTES
19" INSERTION AC SOURCE 1PHASE
•
Variac with downstream connected isolated transformerforafloatingoutputvoltagebetween0-100%.
•
Protected by front side operated thermomagnetic
fuses.
•
Output selector for 4mm safety jacks and universal
socket (Schuko, Franco-American) without PE contact.
•
Current - and voltage reading
- analogue: moving iron class 1,5.
- digital: 3digit LED display TrueRMS,
Accuracy: 0,5% +/-1 digit.
- MFA: Multifunctional display optionally with USB or
LAN interface.
•
Illuminated switch, 2poles for central on/off.
REMOTE Type (central readable)
USB Interface
LAN Interface
see page 8.31 for technical details to the MFA
AC Source 1phase
342. SSS . A 04
A Reading
SSS Voltage /
Current
273 0-270V / 3A 3HE
1
analogue
275 0-270V / 5A 4HE
5
digital
280 0-270V / 10A 4HE
6
MFA
282 0-270V / 12A 4HE
7
MFA with USB Interface
301 0-300V / 10A 4HE
8
MFA with LAN Interface
286 0-270V / 16A 7HE
306 0-300V / 16A 7HE
19" INSERTION AC/DC SOURCE 1PHASE
•
Variac with downstream connected isolated transformerforafloatingoutputvoltagebetween0-100%.
•
Protected by front side operated thermomagnetic
fuses.
•
ConnectiblebridgerectifierforapulsatingDCvoltage
with 48% ripple.
•
AC - and DC output on 4mm safety jacks.
•
Current - and voltage reading
- analogue: moving iron class 1,5.
- digital: 3digit LED display TrueRMS,
Accuracy: 0,5% +/-1 digit.
•
Illuminated switch, 2poles for central on/off.
AC/DC Source 1phase
346.273.102
0-270V / 3A + 0-60V / 10A, analogue 3HE
346.273.502
0-270V / 3A + 0-60V / 10A, digital 3HE
346.275.102
0-270V / 3A analogue 4HE
346.280.102
0-270V / 10A analogue 4HE
www.hera.de | technical details are subject to change without notice
8.41
8. 19" BENCH RACKS WITH 19" MODULES AND CASSETTES
19" INSERTION AC SOURCE 3PHASE
•
AC variac in star connection for an adjustable output
voltage between 0 - 100%.
•
Option FLOATING: with downstream connected
isolated transformer for galvanically separated output
voltage.
•
Inrush current limiter with primary fuse.
•
AC - and DC output on 4mm safety jacks.
•
AC voltage reading with measuring points selector and
3x current reading L1, L2 and L3.
- analogue: moving iron class 1,5.
- digital: 3digit LED display TrueRMS.
- MFA: Multi Measuring Unit optional with USB or LAN
interface.
•
Output with 1x CEE socket straight
400V/ 16A, 6h, Schuko socket and 5x 4mm
safety jacks (L1, L2, L3, N, PE).
REMOTE Type (central readable)
USB Interface
LAN Interface
see page 8.31 for technical details to the MFA
AC Source 3phase
343. SSS . A 02
SSS Voltage /
Current
A Reading
335 0-400V / 3A 7HE
1
analogue
336 0-400V/3A,floating7HE
5
digital
455 0-450V / 5A 7HE
6
MFA
456 0-450V/5A,floating7HE
7
MFA with USB Interface
460 0-400V / 10A 7HE
8
MFA with LAN Interface
461 0-400V/10A,floating7HE
557 0-520V/7A,floating7HE
8.42
technical details are subject to change without notice | www.hera.de
8. 19" BENCH RACKS WITH 19“ MODULES AND CASSETTES
19" CASSETTE VARIABLE AC/DC SOURCE 3PHASE
• 3phase variac for a non floating output voltage of
0 - 400V. Protected by front side operated
thermomagnetic fuses.
• AC/DC source with 6 pulse rectifier for a pulsating DC voltage with 4,3% ripple.
• Current - and voltage reading with phase selector
- analogue: moving iron class 1,5.
- digital: 3digit LED display TrueRMS,
Accuracy: 0,5% +/-1 digit.
• Illuminated switch 2poles with contactor.
• Output on 4mm safety jacks.
AC/DC Sources 3phase
348.401.102
AC Source 0-400V / 1A analogue 70TE
348.401.602
AC Source 0-400V / 1A digital 70TE
348.403.102
AC/DC Source 0-400V / 3A analogue 84TE
348.403.602
AC/DC Source 0-400V / 3A digital 84TE
19" INSERTION AC/DC SOURCE 3PHASE
• Variac with downstream connected isolated
transformer for a floating output voltage between 0 - 100%. Protected by front side operated
thermomagnetic fuses.
Option FLOATING: with downstream connected
isolated transformer for galvanically separated output voltage.
• 1x CEE socket straight 400V/ 16A, 6h, 5poles.
• 5x 4mm safety jacks (L1, L2, L3, N, PE).
• 1x Schuko socket.
•
AC voltage reading with measuring point selector and
3x AC current readings L1, L2 and L3.
- analogue: moving iron class 1,5.
- digital: 3digit LED display TrueRMS.
• 6 pulse rectifier (ripple 4,3%) with DC voltage reading and DC current reading.
• 4mm safety jacks for variable DC voltage output
(factor: 1,35 of the AC voltage).
• Illuminates switch, 2poles with contactor.
AC Source 3phase
347. LLL . A 02
7HE
A Reading
LLL Power
335
0-400V / 3A, NON floating
336
0-400V / 3A, FLOATING
1
455
0-450V / 5A, NON floating
456
0-450V / 5A, FLOATING
5 digital
460
0-400V / 10A, NON floating
461
0-400V / 10A, FLOATING
557
0-520V / 7A, FLOATING
www.hera.de | technical details are subject to change without notice
analogue
8.43
8. 19" BENCH RACKS WITH 19" MODULES AND CASSETTES
19“ REMOTOE CONTROLLED AC SOURCE REMOTE
•
Remote controlled device series with the unique
NetMultiUsing (simultaneous operation at the device
and all interfaces).
•
Motor driven variac with electronic voltage regulation
fortheballanceofload-andinputvoltagefluctuation.
•
Modularconfigurationofcontrolunitandpowerunit.
REMOTE Type (remote controlled)
USB Interface
LAN Interface
•
Background illuminated full-graphic display (64 x
38mm) for the indication of current and voltage (actual
andsetvalue).Passwordprotectedfulltextconfigurati
on menu.
•
Rotary switch for voltage adjustment and for
navigationoftheconfigurationmenu.
•
Output on/off buttons with LED indicaton.
•
USB interface at the front side with NetMultiUsing for
the remote control of all functions.
Optional with rear side LAN interface (10 Base
Tl/100Base Tx; parametrizable with external software).
•
•
Protected by front side operated thermomagnetic
fuse.
•
Output on 4mm safety jacks and/ or universal socket.
•
Variac in external sheet steel housing
(e.g. under bench).
•
Incl. LabView driver and operation software.
Remote Controlled AC Source REMOTE
342. LLL .80 S
S Interface
LLL Power
1phase FLOATING
1phase NON floating
3phase NON floating
2
USB
063
0 - 60V / 3A 3HE
231
0 - 230V / 1A 3HE
335
0 - 400V / 3A 7HE
7
USB / LAN
271
0 - 270V / 1A 3HE
233
0 - 230V / 3A 3HE
455
0 - 450V / 5A 7HE
273
0 - 270V / 3A 3HE
236
0 - 230V / 6,3A 3HE
460
0 - 400V / 10A 7HE
275
0 - 270V / 5A 4HE
239
0 - 230V / 10A 4HE
279
0 - 270V / 10A 7HE
8.44
technical details are subject to change without notice | www.hera.de
8. 19" BENCH RACKS WITH 19“ MODULES AND CASSETTES
19" MOTOR TESTER WITH FREQUENCY CONVERTER
• Menu driven vector frequency converter 0 - 400Hz (max. 650Hz).
• Variable output voltage with variac 0 - 400V/ 6A.
•Stepless frequency adjustment at 10turn
potentiometer.
• Switch for rotation field direction.
• 4x 4mm safety jacks (L1, L2, L3, PE).
• CEE sockets, straight 400V/ 16A, 6h, 5poles.
• Analogue voltage reading class 1,5 with measuring point selector.
• Three analogue current readings (L1, L2, L3) class 1,5.
• Illuminated switch, 2poles with contactor.
Motor Tester with Frequency Converter
356.400.102
7HE
19" MOTOR TESTER WITH VARIAC
• AC variac for a non floeating output voltage of
0 – 400V/ 10A.
• Protected by front side operated thermomagnetic fuse.
• 7x 4mm safety jacks arranged as motor terminal board (U1, U2, V1, V2, W1, W2 and PE).
• Current and voltage reading: - analogue: moving iron class 1,5
- MFA: multi functional unit optionally with USB or LAN interface.
• Illuminated switch, 2poles with contactor.
• Star -/ delta- and rotation direction selector.
• More outputs on 4mm safety jacks (L1, L2, L3, N, PE) and CEE socket straight 400V/ 16A, 6h, 5poles.
see
page 8.31 for technical details to the MFA
Motor Tester with Variac 0-400V/ 10A
385.381.102
with analogue readings
385.381.602
with MFA
385.381.702
with MFA and USB Interface
385.381.802
with MFA and LAN Interface
7HE
www.hera.de | technical details are subject to change without notice
8.45
8. 19" BENCH RACKS WITH 19" MODULES AND CASSETTES
19" AC MOTORTESTER WITHOUT VARIAC
•
Selector switch for the stepless adjustment of the
external variac.
•
7x 4mm safety jacks arranged as motor terminal board
(U1, U2, V1, V2, W1, W2 and PE).
•
Star -/ delta- and rotation direction selector.
•
Current - and voltage reading:
- analogue: moving iron class 1,5
- digital: 3digit LED displays TrueRMS,
Accuracy: 0,5% +/-1 Digit
- MFA: multi measuring unit optional with USB or LAN
interface.
•
More outputs on high-current jacks (L1, L2, L3, N, PE)
and CEE socket straight 400V/ 16A, 6h, 5poles.
REMOTE Type (central readable)
USB Interface
LAN Interface
see page 8.31 for technical details to the MFA
AC Motortester
385.3 SS . A 02
SS Output Current
7HE
A Reading
82
25A
1
analogue
84
40A
5
digital
86
60A
6
MFA
99
100A
7
MFA with USB Interface
8
MFA with LAN Interface
EXTERNAL VARIAC FOR MOTOR TESTER
•
Sheet steel housing with casters, two with brakes.
•
Integrated 3phase motor driven variac with inrush
current limiter.
•
Input terminal block with primary fuse.
•
Power transfer to the motor tester with residual current
device (RCD).
External Variac for Motor Tester
285.516.100
0 - 400V / 16A
285.525.100
0 - 400V / 25A
285.540.100
0 - 400V / 40A
285.550.100
0 - 400V / 50A
285.560.100
0 - 400V / 60A
285.599.100
0 - 400V / 100A
8.46
technical details are subject to change without notice | www.hera.de
8. 19" BENCH RACKS WITH 19“ MODULES AND CASSETTES
19" METER TESTER
Voltage Supply:
• 3x unique adjustable variacs for a floating output
voltage of 0 - 230V/ 2,5A.
• Protected by front side operated thermomagnetic fuse.
• Output on 4x 4mm safety jacks (L1, L2, L3, N).
• 3x analogue voltage readings (moving iron class 1,5).
Current Supply:
• 3x unique adjustable variacs for a floating output
current of 0 - 60A/ 6,6V.
• Output on 6 x 4mm safety jacks
(L1-L1’, L2-L2’, L3-L3’).
• 3x analogue current readings (moving iron class 1,5).
• Illuminated switch, 2poles with contactor.
Zählerprüfung
Meter
Tester
353.260.102
7HE
Special Test Systems with variable AC Sources up to 200A
www.hera.de | technical details are subject to change without notice
8.47
8. 19" BENCH RACKS WITH 19" MODULES AND CASSETTES
19" SINE FREQUENCY CONVERTER, 1PHASE
•Inphase controlled precision frequency converter (distortion factor < 3%) for a floating and stabilized output voltage (+/- 2%).
• Selector switch for 4mm safety jacks or CEE socket 3poles.
• Analogue current and voltage reading.
• Digital frequency and status reading.
• Illuminated switch, 2poles.
Sine Frequency Converter, 1phase
7HE
355.064.102
60Hz / 115V / 4A
355.406.102
400 Hz / 115V / 6A
19" SINE FREQUENCY CONVERTER, 3PHASE
•Inphase controlled precision frequency converter (distortion factor < 3%) for a floating and stabilized output voltage (+/- 2%).
• Selector switch for 4mm safety jacks or CEE socket 5poles.
• 3x analogue current readings L1, L2 and L3.
• Analogue current and voltage reading.
• Digital frequency and status reading.
• Illuminated switch, 2poles with contactor.
Sine Frequency Converter, 3phase
356.402.102
7HE
19" SINE FREQUENCY CONVERTER
• Quarz-controlled frequency converter with output filter for low noise sine output voltage.
• Selector switch for output on 4mm safety jacks or CEE socket.
• Current display.
• Voltage display.
• Frequency and status display.
• Illuminated switch, 2poles.
• Output values (frequency, voltage, power) on
customers demand.
Sine Frequency Converter
F Frequency/
Output Voltage
8.48
356.5 F 0. P 02
7HE
P Phase
0
fixed / fixed
1 1phase
1
fixed / adjustable
3 3phase
2
adjustable / fixed
3
adjustable / adjustable
technical details are subject to change without notice | www.hera.de
8. 19" BENCH RACKS WITH 19“ MODULES AND CASSETTES
19“ FIXED DC VOLTAGE
• Stabilized and short-circuit proofed DC power supply for a fixed output voltage, galvanically isolated.
• Overload-, overvoltage - and overtemperature
protected.
• Offset: < 2%; ripple: < 100mV p-p.
• Output on 4mm safety jacks.
• Illuminated switch, 2poles for central on/off.
Fixed DC Voltage
368. AAA . AA S
AAA AA Type
S System
105.05
5V / 5A 14 TE
2
19" Cassette
105.10
5V / 10A 21TE
6
19'' Panel 2HE
112.03
12V / 3A 14TE
112.06
12V / 6A 21TE
112.12
12V / 12,5A 28TE
113.11
13,5V / 11,2A 28TE
124.03
24V / 3,2A 21TE
124.08
24V / 8,4A 28TE
148.02
48V / 2,3A 21TE
148.04
48V / 4,2A 28TE
212.03
+ 12V / 3A + 5V / 6A 28TE
224.02
+ 24V / 2A + 5V / 6A 28TE
312.01
+/- 12V / 1A + 5V / 5A 14TE
315.01
+/- 15V / 0,8A + 5V / 5A 14TE
19" LABORATORY POWER SUPPLY COMPACT 0...30V / 0...2A
•Inphase controlled, earthfree and short-circuit proofed laboratory power supply.
• Voltage and current adjustment with potentiometer and LED status indication.
• Output on 4mm safety jacks.
• Ripple: < 1mV eff.
• Offset: < 0,05%.
• Selector switch at analogue reading class 1,5 for
voltage and current.
Laboratory Power Supply compact 0...30V / 0...2A
380.810.202
www.hera.de | technical details are subject to change without notice
19“ Cassette 21TE
8.49
8. 19" BENCH RACKS WITH 19" MODULES AND CASSETTES
19“ LABORATORY POWER SUPPLY EXTENDED RANGE
•
Background illuminated LCD display for the
simultaneous 4digit indication of voltage and current.
•
Rotary switch for the settings of voltage and current
with selectable step width.
•
Output ON/ OFF button with mode indication in the
display.
•
Programmable operation lock, overvoltage - and
overcurrent protection.
•
Front side USB interface for remote control.
•
Optional rear side with LAN interface for remote control.
•
LabView driver and WinRemote program module within
the scope of delivery.
•
Output on 4mm safety jacks.
•
Illuminated switch, 2poles for central on/ off.
•
Stability at 0-100% load: <0,15%.
•
Regulation 10-90% load: <1ms.
•
Overvoltage protection: 0…46,2V.
•
Offset: <0,2%.
•
Output power: max. 100W (Nominal value of current
and voltage adjust each other, so the max. power of
P = U x I does not exceed).
19" Laboratory Power Supply Extended Range
A Channels
REMOTE Type (remote controlled)
USB Interface
LAN Interface
36 A . LLL . S 0 V
LLL Voltage and Current
S System
V Interface
1
Single Unit 42TE / 3HE
406 100W / 0-42V / 0-6A
7
19" Casette
2
USB
2
Double Unit 63TE / 3HE
410 160W / 0-42V / 0-10A
8
19" Insertion
7
USB / LAN
803 100W / 0-84V / 0-3A
805 160W / 0-84V / 0-5A
8.50
technical details are subject to change without notice | www.hera.de
8. 19" BENCH RACKS WITH 19“ MODULES AND CASSETTES
19“ LABORATORY POWER SUPPLY STANDARD
•Inphase controlled laboratory power supply with
adjustable voltage and current.
• Offset: < 0,01%; ripple: <0,2mVeff.;
Regulation Tout: < 20µs; overshoot xm: <500mV; Temp. coefficient: typic 0,003%/K.
• Regulated van and overtemperature protection.
• Precise current and voltage adjustment with 10turn potentiometer.
• LED mode indication.
• Output-off-button.
• Current - and voltage reading: - analogue: moving iron class 1,5
- digital: 3digit LED displays TrueRMS,
Accuracy: 0,5% +/-1 Digit.
• Optionally with power supply for fixed voltage 5V/ 3A;
offset < 0,02%.
• Output on 4mm safety jacks.
• Illuminated switch, 2poles for central on/off.
• From output voltage 20A switchable sense lines for 4 wire measurement. Output on high-current jacks.
Laboratory Power Supply Standard
K Channels
36 K . LLL . S 0 A
LLL Voltage and Current
S System
A Reading
1
Single Unit 42TE / 3HE
302 2x 0-30V / 0-2,5A (only double unit)
1
19" Cassette
2
digital
2
Double Unit 42TE / 3HE
305 0-30V / 0-5A
4
19" Insertion
4
analogue
3
Double Unit 42TE / 3HE
310 0-30V / 0-10A
+ Fixed Voltage: 5V/ 5A
320 0-30V / 0-20A (only single unit)
602 0-60V / 0-2,5A
605 0-60V / 0-5A
610 0-60V / 0-10A (only single unit)
www.hera.de | technical details are subject to change without notice
8.51
8. 19" BENCH RACKS WITH 19" MODULES AND CASSETTES
CONTROL YOUR TESTS
CONVENIENTLY AT THE PC
You would like to control your device settings conveniently at the PC and
get your measuring results directly on your monitor? Our REMOTE series is
exactlyforthisapplication.Foraneasyidentificationofthecomplete
REMOTE series, please follow the sign below:
REMOTE Type (remote controlled)
USB Interface
8.52
LAN Interface
technical details are subject to change without notice | www.hera.de
8. 19" BENCH RACKS WITH 19“ MODULES AND CASSETTES
19“ LABORATORY POWER SUPPLY REMOTE
•
Network-compatible device series with the unique
NetMultiUsing (simultaneous operation at the device
and all interfaces).
•
Same power units than the laboratory power supply
STANDARD.
•
Rotary switch for voltage and current settings and
dynamic step width adjustment.
•
LED mode indication.
•
Output-off-button
•
Background illuminated full-graphic display (64 x
38mm) for the indication of current and voltage (actual
and set value). Password protected full text
configurationmenu.
Accuracy: 0,5% +/-1 Digit.
REMOTE Type (remote controlled)
USB Interface
LAN Interface
• Optionallywithfixedvoltagepowersupply5V/3A;
• Front side USB - or RS232 interface with
NetMultiUsing for the remote control of all functions.
•
Optional with rear side LAN interface
(10BaseTl/100BaseTx; parametrizable with external
software).
•
Illuminated switch, 2poles for central on/ off.
•
Incl. LabView driver and operation software.
Laboratory Power Supply REMOTE 36 K . LLL . S 0 R
K Channels
LLL Voltage and Current
S System
R Remote
1
Single Unit 42TE / 3HE
302 2x 0-30V / 0-2,5A (only double unit)
7
19" Cassette
2
USB
2
Double Unit 42TE / 3HE
305 0-30V / 0-5A
8
19" Insertion
7
USB / LAN
3
Double Unit 42TE / 3HE
310 0-30V / 0-10A
+ Fixed Voltage: 5V/ 5A
320 0-30V / 0-20A (only single unit)
602 0-60V / 0-2,5A
605 0-60V / 0-5A
610 0-30V / 0-10A (only single unit)
www.hera.de | technical details are subject to change without notice
8.53
8. 19" BENCH RACKS WITH 19" MODULES AND CASSETTES
19" HIGH PERFORMANCE LABORATORY POWER SUPPLY
•
19“ Insertion with microcontroller controlled laboratory
power supply.
•
Inphase controlled output stage (the nominal values of
current and voltage adjust each other, so the max.
power of P= U x I does not exceed).
•
REMOTE Type (remote controlled)
USB Interface
LAN Interface
Operation and indication with rotary switch, buttons for
programming and matrix display for:
- preset nominal values for U, I and P
- preset nominal values for U, I and P
- Under- and overvoltage protection.
19“ High Performance Power Supply
- Control mode (CV, CC, CP)
- Error messages and menu settings.
• Memoryfunctionforfivedifferentnominalvalues.
•
Rear side with analogue interface (control of current,
voltage and power).
•
Output on high-current jacks.
•
Rear side upgradable with interface cards (RS232,
USB,LAN/Ethernet,CAN-BusandProfi-Bus).
•
Depth: 460mm / 380mm (640W und 650W).
19“ Output Panel for High Performance Power Supply 1HE
NOTE:
Mind the depth when choosing the bench rack!
Technical details:
High Performance Laboratory Power Supply
•
Efficiencyfactor:93%.
•
Ripple: 10mV pp / 4mV rms.
•
Power factor: > 0,99.
•
Accuracy: < 0,2%.
•
Voltage stability at 0 - 100% load: < 0,05%.
•
Response time: 10 - 100% load: < 2ms.
•
Dielectric strength: 2500V DC.
365.065.032
640W / 0-32V / 0-20A 2HE
365.065.065
650W / 0-65V / 0-10A 2HE
365.065.160
640W / 0-160V / 0-4A 2HE
365.100.080
1000W / 0-80V / 0-40A 2HE
365.150.040
1500W / 0-40V / 0-60A 2HE
365.150.080
1500W / 0-80V / 0-60A 2HE
365.150.360
1500W / 0-360V / 0-15A 2HE
365.300.040
3000W / 0-40V / 0-120A 2HE
365.300.080
3000W / 0-80V / 0-120A 2HE
365.300.160
3000W / 0-160V / 0-60A 2HE
10 CANbus-Interface
13 Profibus-Interface
365.300.360
3000W / 0-360V / 0-30A 2HE
11 LAN (Ethernet)-Interface
14 RS232-Interface
365.300.720
3000W / 0-720V / 0-15A 2HE
12 IEEE/ GPIB-Interface
15 USB-Interface
19" Output Panel for High Performance Power Supply
Option Interface
II Interface
365.000. A
I
A Output Jacks
2
1HE
I Interface
4x 4mm Safety Jacks (max. 32A) completely wired
0
no Interface
6
2x 4mm Clamp Pole Sockets (max. 64A) + Sense
2
USB Socket with connecting cable
7
2x Toggle Clamp with 4mm Jack (max. 200A) + Sense
4
RS232 / Sub-D Socket (9poles) with connecting cable
6
LAN / RJ45 Socket CAT6 with Patch Cable
5
8.54
365.000. II 0
technical details are subject to change without notice | www.hera.de
8. 19" BENCH RACKS WITH 19“ MODULES AND CASSETTES
19“ CASSETTE WITH DIDACTIC SUPPLY
The universal supply is suitable for basic tests with the
hera training systems.
Symmetric DC Fixed Voltage +/- 15V/ 1A:
• Stabilized (+/- 5%), floating and shortcircuit proofed power supply with thermic fuse.
• LED mode indication.
• Output on 4mm safety jacks.
Variable Laboratory Power Supply 0…30V/ 1A:
• Inphase controlled, floating and shortcircuit proofed laboratory power supply.
• Voltage setting with potentiometer and LED mode indication.
• Ripple: < 1mV eff.
• Offset: < 0,05%.
• Output on 4mm safety jacks.
Function Generator 2Hz – 200kHz:
• Selector for signal forms: sinus, triangle,
squared and positive pulse.
• Selector for frequency range:
x1Hz, x10Hz, x100Hz, x1kHz, x10kHz and 1kHz fi.
• Potentiometer for stepless frequency adjustment.
• Potentiometer for a stepless adjustable amplitude of 0...20V ss.
• Output on BNC socket (Ri = 50Ω).
AC Source 7/ 12V max. 50mA:
• Electrically generated 3phase sinewave AC voltage 50Hz.
• LED mode indication with outer conductor (L1, L2, L3)
with thermic fuse.
• Output on 4mm safety jacks.
• OPTIONALLY with analogue voltage and current
reading and current setting with potentiometer.
AC Low Votage 10V + 24V/ 100mA:
• Floating and shortcircuit proofed AC low voltage with thermic fuse.
• LED mode indication.
• Output on 4mm safety jacks.
Didact Supply
380.800.102
Didactic Supply 56TE
380.800.202
Didactic Supply with Reading 63TE
www.hera.de | technical details are subject to change without notice
8.55
8. 19" BENCH RACKS WITH 19" MODULES AND CASSETTES
19“ CASSETTE FUNCTION GENERATOR COMPACT
• Function generator 200kHz.
• Selector for signal forms: sine wave, triangle, squared and positive pulse.
• Selector for frequency range: x1Hz, x10Hz, x100 Hz, x1kHz, x10kHz and 1kHz fix.
• Potentiometer for stepless fine adjustment.
• Potentiometer for a stepless adjustable amplitude of 0…20V ss.
Function
Funktionsgenerator
Generator 200kHz
200kHz compact
kompakt
• Output on BNC socket (Ri = 50Ω).
380.820.102
380.820.102
19“ Cassette 21TE
19“ CASSETTE FUNCTION GENERATOR 1MHZ / POWER AMPLIFIER
• Frequency adjustment with multiturn potentiometer.
• 6 level selector for frequency range.
• Rotation switch for the selection of sinewave, triangle, squared and external signal.
• Variable symmetry with potentiometer of 20%...80%.
• Potentiometer for a stepless adjustable amplitude of 0...30V ss (no load ).
• DC-Offset between -10V...+10V adjustable.
• Frequency adjustment with external voltage input (VCF).
• Frequency reading at 4digit LED display.
• 5x BNC sockets with external signal input; TTL output, 30dB output, 50W output.
Option Power Amplifier:
• Switchable range of 0,1Hz...100kHz.
• 40W eff continuous output with sinus at 5Ω.
• Shortcircuit proofed due to retracted current
characteristic.
Function Generator 1MHz / Power Amplifier 100kHz
371.653.102
Function Generator, no Power Amplifier 42TE
371.653.202
Function Generator, with Power Amplifier 42TE
371.653.002
Power Amplifier 28TE
372.653.202
Functon Generator with Power Amplifier 3HE
• Max. Output voltage 40V ss.
8.56
technical details are subject to change without notice | www.hera.de
8. 19" BENCH RACKS WITH 19“ MODULES AND CASSETTES
19“ FUNCTION GENERATOR 2MHZ LC
•
Sinewave -, squared-, triangle-, pulse-, TTL - and
ramp signal.
•
Frequency range 0,2Hz bis 2MHz (±1%),
Resolution 1mHz with 4digit LED frequency indication.
•
Amplitude 1mV pp to 20V pp (±5%),
Resolution 0,1mV with 3digit amplitude indication.
•
Output power 2W pp.
•
Impedance50Ω.
•
Attenuator 10...70dB.
•
Offset -10...10V-.
•
Duty cycle 10...90%.
•
Distortion Sinus <= 2% (at 1kHz).
•
Rising time square <= 50ns.
•
Frequency counter 0,2Hz - 10MHz.
Function Generator LC
•
Amplitude range frequency counter 0,5...5V pp.
371.655.102
19" Cassette 56TE
•
Inputimpedancefrequencycounter10kΩ.
372.655.102
19" Insertion 3HE
19“ FUNCTION GENERATOR 20MHZ LC USB
•
Two channel function generator (aribitrary waveform
generator) with frequency counter and USB interface.
Easy menu navigation with graphic display.
•
Sinewave,squared,pulse,ramp,48definedaribitrary
outputwaves,freelydefinablearibitraryoutputwaves,
signal noise.
•
2 channels.
•
Frequency range 1µHz bis 20MHz (sine),
Distortion factor <0.2%.
•
Frequency range square 1µHz - 5MHz,
Rising time <20ns.
•
Frequency range triangle 1µHz - 150kHz.
•
Frequency range ARB 1µHz - 5MHz, resolution 1µHz.
•
Waveform storage 4kpts.
•
Impedance50Ω.
•
Sweep function 1ms - 500s.
•
Internal modulation AM/ FM/ PM/ FSK.
•
Amplitude: 2mV pp to 10V pp (channel 1)/
2mV pp to 3V pp (channel 2).
•
Integrated frequency counter (200MHz).
•
USB interface for PC connection and memory on
USB stick.
•
Incl. LabView driver and operation software.
www.hera.de | technical details are subject to change without notice
REMOTE Type (remote controlled)
USB Interface
Function Generator LC USB
371.660.702
19“ Cassette 42TE
372.660.702
19“ Insertion 3HE
8.57
8. 19" BENCH RACKS WITH 19" MODULES AND CASSETTES
19“ PRECISION FUNCTION GENERATOR 20MHZ USB
•
Function generator with direct digital synthesis (DDS)
for an extraordinary accuracy, stability and highest
spectral purity, low phase noise and excellent
frequencyflexibility.
Easy and intuitive operation due to background
illuminated LCD display, keyboard and pulse rotary
switch.
• Sine, square, triangle, possitive and negative pulse.
• LCD display, 4-lines.
• Frequency range 0,001Hz to 20MHz;
Resolution 6 digits or 1MHz.
• Amplitude:5mVppto20Vppat50Ωor600Ω.
• Distortion: <0,3% THD bis 500kHz
<-50dBc bis 1MHz, <-3dBc bis 20MHz.
• Rise -/ release time square signal: <22ns.
• Symmetry: variable 20% to 80% in 1%-steps.
• Sweep time: 0,1Hz to 20MHz linear or logarithmic.
• Modulations: Gating, AM, FSK, Shift Keying, Tone
Switching.
• Memoryforuptoninecompletedeviceconfigurations.
• RS232 and USB Interface for remote control by PC.
• Incl. LabView-driver and operation software.
REMOTE Type (remote controlled)
USB Interface
Precision Function Generator 20MHz USB
8.58
371.671.702
19“ Cassette 56TE
372.671.702
19“ Insertion 3HE
technical details are subject to change without notice | www.hera.de
8. 19" BENCH RACKS WITH 19“ MODULES AND CASSETTES
19“ PRECISION FUNCTION GENERATOR USB / LAN
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
High performance DDS function generator with
complete pulse generator and aribitrary functions.
High resolution graphical LCD display for a
representative reading of the signal and aribitrary signals
could be memorized and transmissioned at the front
sideinstalledUSB-flash-socketorattherearside
installed LAN interface (Ethernet).
Frequencyrange:1μHzto25MHz;
Resolution:14Digitsor1μHz.
Sine, square, frequency rise, pulse, sin(x)/s,
exponents and noise.
Harmonic (1V ss) DC to 20MHz:
-65dBc; 20kHz to 100kHz: -60dBc;
100kHz to 1MHz: -45dBc; 1MHz to 25MHz: -40dBc.
Rise -/ release time square wave: <13ns.
Symmetry/ linearity
0,0% to 100,0%, 0,1% resolution; <0,1% to 30kHz.
Real pulse generator mode with variable delay and
variable rise/ release.
Aribitrary signals up to 128K dots at 125MS/s.
WaveformstoragewithUSBflashdrive.
Big graphical LCD with simultaneous text and signal
display.
Sufficientinternal/externalmodulationincl.AM,FM,PM,
PWM and FSK.
Output20mVto20Vssat50Ω;correctingfunctionfor
loads with different impendances.
DCvoltageoff-set:0Vto±5Vat50Ωwith
any amplitude.
Memoryforvariousdeviceconfigurationsin
non-volatile memory.
Front side USB- and rear side LAN interface.
Incl. creation and operation software.
www.hera.de | technical details are subject to change without notice
REMOTE Type (remote controlled)
USB Interface
LAN Interface
Precision Function Generator USB / LAN
371.672.802
19" Cassette 25MHz 56TE
372.672.802
19“ Insertion 25MHz 3HE
371.675.802
19“ Cassette 50MHz 56TE
372.675.802
19“ Insertion 50MHz 3HE
8.59
8. 19" BENCH RACKS WITH 19" MODULES AND CASSETTES
19“ DIGITAL MULTIMETER LC
•
True-RMS bench top multimeter with RS232 and
USB interface and many measuring functions.
•
Measuring range AC and DC Volt: 600mV…1000V.
Measuring range AC and DC Ampere: 600µA…10A.
Measuring range capacity: 6nF…6mF.
Measuringrangeresistance:600Ω…60MΩ.
Measuring range temperature: -40°C…1000°C.
Measuring range frequency: 6kHz…60MHz.
•
Continuity tester: transistor and diode test.
•
Background illuminated LCD display: 6000 digits.
•
Automatic/ manual selector for measuring range.
•
Min.-/ max.- and hold function.
•
Safety class IEC 1010-1, CAT I, 1000 V/. CAT II 600 V.
•
Incl. measuring leads, temperature probes and
operation software.
REMOTE Type (remote controlled)
USB Interface
Digital Multimeter LC
371.711.602
19“ Insertion 3HE
372.711.602
19“ Cassette 49TE
19“ DIGITAL MULTIMETER COMPACT
•
4 1/2digit LED display with digit height of 13mm.
•
Functions: Voltage AC and DC, current AC and DC
and resistance.
•
True root mean square measurement (TRMS).
•
Range selector: manual with switch series.
•
Sampling rate: ca. 2,5 measurings /sec.
•
DC voltage: 200mV to 1000V in 5 ranges
(resolution:max.10μV).
•
DCcurrent:200μAto20Ain6ranges
(resolution: max. 10nA).
•
AC voltage: 200mV to 1000V in 5 ranges
(resolution:max.10μV).
•
ACcurrent:200μAto20Ain6ranges
(resolution: max. 10nA).
•
Resistance:200Ωto20MΩin5ranges
(resolution:max.10mΩ).
•
Connection on 4mm safety jacks.
•
Illuminated switch, 2poles.
Digital Multimeter compact
372.710.402
8.60
19“ Cassette 21TE
technical details are subject to change without notice | www.hera.de
8. 19" BENCH RACKS WITH 19“ MODULES AND CASSETTES
19“ PRECISION DIGITAL MULTIMETER USB
•
Dual display enables to simultaneously indicate two
seperate measuring values.
•
Resoution: 6 1/2 digits.
•
2-wire-/ 4-wire-resistance measurements.
•
5000 samplings/ sec. at 4 1/2 digits.
•
Integrated functions: DC I, DC V, AC I, AC V,
2WO, 4WO, frequency, period, diode,
continuity tester, limits, ratio, MX+B, %, dB, dBm,
min./ max and zero.
•
Different triggers.
•
TrueRMS AC voltage and current measurement.
•
USB interface.
•
Inputimpedancefrequencycounter10kΩ.
REMOTE Type (remote controlled)
USB Interface
Precision Digital Multimeter USB
371.711.402
19“ Cassette 56TE
372.711.402
19“ Insertion 3HE
19“ PRECISION DIGITAL MULTIMETER LAN
•
5 ¾digit display (480.000 dots).
•
3 simultaneous readings: e.g. DC + AC + statistic.
•
Sampling rate up to 200 measurements/sec.
•
0,015% accuracy (DC).
•
12 measuring functions: DCV, DCI, TrueRMS ACV and
ACI, frequency, 2- and 4-wire-resistance, capacity,
continuity, diode, temperature, power.
•
Precise readability due to excellent TFT colour display.
•
Resolution1μV,100nA,1mΩ,1pF,1Hz,0,1°C.
•
True root mean square AC, AC+DC.
•
Mathematical function: limit test, min./ max.,
average, offset, DC power, dB, dBm.
•
Temperature measurement with platinum sensors
(PT100/ PT500/ PT1000).
•
Data logging in CSV format on internal memory or USB
stick.
•
Interface: USB and Ethernet.
•
Incl. LabView driver and operation software.
REMOTE Type (remote controlled)
USB Interface
LAN Interface
Precision Digital Multimeter LAN
371.702.202
19“ Cassette 56TE
372.702.202
19“ Insertion 2HE
www.hera.de | technical details are subject to change without notice
8.61
8. 19" BENCH RACKS WITH 19" MODULES AND CASSETTES
19" DIGITAL STORAGE OSCILLOSCOPE
•
Digital storage oscilloscope with many functions and excellent price-performance ratio. Flush in 19“ insertion integrated for the installation in bench racks. The oscilloscope comes with freely available software for data transmision and data logging on PC.
• 2- or 4-channels.
• 8“ TFT colour display.
• 2GSa/s real-time sampling rate.
• 2MPts memory depth.
• 36 automatic measurements.
• FFT analysis.
• 6 digit frequency counter.
• USB interface and frontside USB connector for
memory stick.
Digital
Oszilloskop
Storage Oscilloscope
373.119.207
2-Channel / 70MHz
373.119.407
4-Channel / 70MHz
373.119.222
2-Channel / 200MHz
373.119.422
4-Channel / 200MHz
5HE
19“ Insertion with other types on demand.
8.62
technical details are subject to change without notice | www.hera.de
8. 19" BENCH RACKS WITH 19“ MODULES AND CASSETTES
19" CONSTANT CURRENT SOURCE
• Selector switch for 4mA, 20mA and 0...50mA.
• Burden voltage: max. 30V.
• 10turn potentiometer for 0...50mA.
• LED digital display 3digits.
• Status-LED (Burden allowed / not allowed).
• Output on safety jacks.
• Illuminated switch.
Constant Current Soure
369.050.402
19“ Cassette 21TE
19" CONSTANT VOLTAGE SOURCE
• Selector switch for 1V, 10V und 0...30V.
• Short circuit current: 100 mA.
• 10turn potentiometer for 0...30V.
• LED digital display 3digits.
• Status-LED (Burden allowed / not allowed).
• Output on safety jacks.
• Illuminated switch.
Constant Voltage Source
369.050.202
19“ Cassette 21TE
19" DIGITAL THERMOMETER
• Temperature device for PT1000 sensor according to DIN EN 60751.
• Devices in 3 wire technology with automatic line
resistance compensation.
• Measuring current max. 1,5mA. Analogue output (not isolated) in mV/°C.
• Accuracy: ± 0,1% ± 1 D v. M.
• Measuring rate 2,5M/sec.
• 3 1/2digit LED display (12,5mm; red).
• Incl. rod-type sensor or surface sensor
in 3 wire technology.
www.hera.de | technical details are subject to change without notice
Digital Thermometer
369.060.102
-100,0°C ..+199,9°C 21TE
369.060.202
-200°C...+600°C 21TE
8.63
8. 19" BENCH RACKS WITH 19" MODULES AND CASSETTES
19“ PRESSURED AIR SUPPLY
• Closing valve.
• Self-closing quick-release coupler 4/6
(unregulated).
• Adjustable pressure regulator with analogue pressure gauge.
• Two self-closing quick-release coupler 4/6
(regulated).
• Connecting hose, completely wired.
Pressured Air Supply
388.003.102
0 - 3bar 42TE
388.010.102
0 - 10bar 42TE
388.013.302
0 - 3bar + 0 - 10bar 2HE
19“ PRESSURE CALIBRATOR ANALOGUE
• Precision pressure regulator.
• Selector switch between internal and external supply with two 3/2-magnetic valves and LED indication.
• Inlet and outles with self-closing quick-release
couplers 4/6mm.
• Analogue pressure gauge class 1,0.
• Illuminated switch.
• Rear side pressure connector.
Pressure Calibrator analogue
8.64
389.001.102
Vacuum 42TE
389.102.102
0 - 2,5bar 42TE
389.106.102
0 - 6bar 42TE
389.110.102
0 - 10bar 42TE
389.110.302
0 - 2,5bar + 0 - 10bar 3HE
technical details are subject to change without notice | www.hera.de
8. 19" BENCH RACKS WITH 19“ MODULES AND CASSETTES
19" PRESSURE METER / PRESSURE CALIBRATOR DIGITAL
• Digital meter with integrated pressure sensor for the measurement of difference -, relative -, or absolute pressure.
• 3½digit LCD display.
• Piezoresistive pressure sensor.
• Measuring range HI, class 0.2% v.E.
• Measuring range LO, class 0.5% v.E.
• Inlet and outlet with self-closing quick-release
couplers 4/6mm.
Digital Pressure Meter
Calibrator with:
• Precision pressure regulator.
• Selector switch for internal and external supply with two 3/2- magnetic valves and LED indication.
• Illuminated switch.
• Rear side pressure connector.
Digital Pressure Calibrator
Pressure Meter / Pressure Calibrator digital
383.002.002
Pressure Meter 0 - 2000mbar 28TE
383.010.002
Pressure Meter 0 - 10bar 28TE
383.002.102
Pressure Calibrator 0 - 2000mbar 42TE
383.010.102
Pressure Calibrator 0 - 10bar 42TE
HAND PRESSURE PUMP
• Handheld device for the precise generation of pressure or vacuum.
• High accuracy due to fine pressure regulator.
• High temperature stability due to thermal isolated pump unit.
Hand Pressure Pump
390.000.700
Vacuum -800mbar
390.005.000
0 - 5bar
Other calibrators on demand.
www.hera.de | technical details are subject to change without notice
8.65
8. 19" BENCH RACKS WITH 19" MODULES AND CASSETTES
19“ ELECTRICAL APPLIANCE TESTER ANALOGUE
• Module for testings according to DIN VDE 0701 - 0702. and repeated tests according to BGV A3.
• Leakage current test 0...18mA,
Testing voltage 40V AC.
• Comfortable operation with membrane keys.
• Analogue display, key pad and testing socket.
• Single step testings or automatic test procedure.
• Automatic mode with a procedure of all three tests in a row.
• Optical identification of the actual testing.
• No manual polarity reversal of the mains plug
according to DIN VDE 0701 – 0702 necessary.
• PE resistance test 0...100mΩ,
Testing current 200mA DC.
• Isolation resistance test 0,2...10MΩ,
Testing voltage 500V DC.
Electrical Appliance Tester analogue
377.002.802
19“ Insertion 4HE
19“ ELECTRICAL APPLIANCE TESTER DIGITAL
• Module for testings according to DIN VDE 0701 - 0702. and repeated tests according to BGV A3 and
DIN EN 62353.
• Easy menu navigation with LCD display.
• Single step testings or automatic test procedure.
• PE resistance test 0...100mΩ,
Measuring current 200mA DC.
• Isolation resistance test 0,2...10MΩ,
Testing voltage 500V DC.
• Manual or automatic setting of limiting value.
• Leakage currrent test 0...18mA,
Testing voltage 40V AC.
• Remote controllable from PC due to USB interface.
• Digital display, key pad and testing socket.
• Exporting function for testing files in Excel or other data files. Import function for customer and test item data.
• Automatic mode with a procedure of all three tests in a row.
• RS232C interface for barcode scanner.
• Selective data logging of test protocol from repeating tests by reading in of barcodes, customer details, date or test instrument number.
• Automatic data assignation from data memory to the newly measured values for repeating tests when
reading in the barcode.
• Automatic set-up of the test procedure by barcode.
Electrica Appliance Tester digital
377.002.902
19“ Insertion 4HE
TEST ENCLOSURE
• Dimensions: 530 x 900 x 660mm (WDxH).
• Lower side with plastic base and sufficient room for test item adaptor.
• Pivoting semi-circular test enclosure made of perspex with handle and safety switch.
• Rear and sides made of plastics.
Test Enclosure
377.050.100
8.66
pcs.
technical details are subject to change without notice | www.hera.de
8. 19" BENCH RACKS WITH 19“ MODULES AND CASSETTES
19" HIGH VOLTAGE TESTER
• Test voltage: 0…6000V manual stepless adjustable
HV-resolution: 10V eff HV
• HV mode selection: manual / automatic / burn.
• Voltage indication: digital root mean square indication (TRMS).
• Protection: key switch, external protective contact and emergency off.
• HV activation: in mains voltage zero-crossing.
• HV testing current: I max = 100mA | Ik>200mA
(according VDE- / IEC regulation).
• Microprocessor controlled with HIGH-TEC processor of latest technology.
• Total current: digital root mean square indication (TRMS)
resolution: 0,1mA.
• Display: illuminated, high-contrast, 2line 16digit alphanumeric display.
•
HV limiting current evaluation: HV-I
min/max-comparator :
0,1…100mA - variable programmable,
report if the limiting current is exceeded.
• Signal: optic and accoustic failure messages.
• CE conform: according to EN50191.
• HV response time: < 30ms.
• HV nominal power: >500VA (nach VDE-/ IEC regulation)
from approx. 500V.
High Voltage Tester
377.010.102
High Voltage Tester 3HE
19" UNIVERSAL TESTER
Universal Tester for all Safety Tests:
• Software language selectable of DE, UK, IT and SP.
• Protective conductor resistance 1…30A AC/ 6V or 12V.
• Accoustic signal for failure message.
• Insolation resistance 30...1000V.
• Depth with rear side connector: 350mm + approx. max. 60mm for industrial plug.
• High Voltage 0...6000VAC/ 100mA/ 500VA.
Technical details:
• Illuminated TFT display with touch screen. • Data base for approx. 10000 test proceedings and test results.
• 8 Gbyte memory.
• LAN -, 4x USB - and CAN-Bus Interface.
• 3x serial RS232- 9poles SUB-D.
• Warning and result lamp.
• Input for external protective input and emergency off.
• Digital in- and output (24V DC) for external operation e.g. PLC controlled.
• 4x Inputs for variable use (e.g. external digital program selection).
Universal Tester
377.030.100
Universal Tester 4HE
Accessory for Universal Tester
377.039.100
Protective Conductor Probe (1...30Amp-2,5m) with Starter
377.039.150
PE Connecting Cable with PE Crocodile Clamp
377.039.200 Safety Test Gun separately 10kVDC / 8kVAC (2m)
377.039.300 Warning Signal Lamp, standing
377.039.350 Result Signal Lamp, standing
377.039.400 Foot Switch for Test Voltage On/Off
(2m cable)
www.hera.de | technical details are subject to change without notice
8.67
8. 19" BENCH RACKS WITH 19" MODULES AND CASSETTES
19" SUB RACK FOR 19“ CASSETTES
• 19“ sub rack for 3HE cassettes in euro raster and 3HE front panels in multiplier raster of 5,08mm (DIN 41494).
• Right and left with fixing brackets for the integration into 19“ racks (light grey powder coated).
• Incl. guiding rails and H15 connector.
• Completely wired with 3phase wire harness and
terminal block.
• Depth: 290mm.
19" Sub Rack for 19" Cassettes
341.003.302
84TE / 3HE
19" SUB RACK FOR 19" EP/MP MODULES
• 19“ sub rack for the integration of 3HE panels in EP raster or 5HE panels in MP raster.
• Right and left with compensating panels and fixing bracket for the 19“ bench rack (light grey powder coated).
19“ Sub Rack for 19" EP/MP Modules
341.003.102
1½ EP / 3HE
341.005.102
3MP / 5HE
8.68
technical details are subject to change without notice | www.hera.de
8. 19" BENCH RACKS WITH 19“ MODULES AND CASSETTES
19" SUB RACK FOR LS2000 INSERTIONS
• 19“ sub rack for the integration of LS2000 2x single or 1x double insertion.
• Right and left with fixing brackets for the 19“ bench rack (light grey powder coated).
• Incl. guiding rails and connectors.
• Completely wired with 3phase wire harness and
terminal block.
19" Sub Rack for LS2000 Insertions
341.007.302
7HE
PROFI 19" SHELF UNIT
• For bench racks with tilted front.
• The shelf units are made as insertions for the 19“ bench racks of the PROFI system.
• Equipped with one height adjustable shelf board.
• Colour: light grey.
PROFI 19“ Shelf Rack
7HE
341.008.002
Standard
341.008.502
ESD
www.hera.de | technical details are subject to change without notice
8.69