REOVIB SWM 3000
Service and test meter for vibratory feeders
º Data memory
• Measurement of frequency,
amplitude and acceleration
• RS 232 interface for transferring
the data to a PC
• Battery-operated (independent
from mains supply)
• Sensor input scalable 10...500
mV/g
• Sensors (optional) for 10, 100,
and 500 mV/g
• Supplied with rechargeable
batteries and charging unit
Type
ID no.:
Measuring ranges frequency:
Operating temperature:
Vibration amplitude:
Vibration speed:
Acceleration:
Measurement error:
Operating temperature:
Supply voltage:
Acceleration sensor:
(optional)
Weight:
Protection rating:
Protective case:
Description
The SWM 3000 meter is intended for commissioning, testing, and servicing
vibratory feeders.
Together with an acceleration sensor, it is possible to measure frequency ?Hz?,
amplitude ?mm?, vibration speed ?cm/s?, and vibration acceleration ?g?.
Measurement values are displayed on the LC display, and can also be stored in
the meter (40 measurement values). The built-in RS 232 interface permits the
stored data to be transferred easily to a PC in the form of an *.xls file.
Included in the delivery are the rechargeable batteries and a charging unit. Also
supplied is an RS 232 connecting cable for linking to a PC, and a 3,5-inch
diskette with the corresponding read-out program.
The acceleration sensors and the optional mounting magnets must be ordered
separately.
Dimension drawing
REOVIB SWM 3000
677301
5...600 Hz
0...45° C
0...30 mm true (0...60 mm)
0...600 cm/sec
0,2...150 g
1,5%
0...45 °C
rechargeable battery or charging unit
10 mV/g, 100 mV/g,
500 mV/g
450 g
IP 40
optional
Stand: 15.08.2012
Irrtümer und Änderungen vorbehalten
Download PDF
Similar pages