Floor-Mount and Free-Stand Enclosures Floor-Mount and Free-Stand Enclosures
Spec-01073
FS66S Global Free-Stand Single and Dual Access, Type 4X
INDUSTRY STANDARDS
SPECIFICATIONS
UL 508A Listed; Type 3R, 4, 4X, 12; File No. E61997
cUL Listed per CSA C22.2 No 94; Type 3R, 4, 4X, 12; File No.
E61997
NEMA/EEMAC Type 3, 3R, 4, 4X, 12, 13
E.I.A. RS-310-D
IEC 60529, IP66,
IEC 62208
Meets NEMA Type 3RX requirements
•
•
•
•
•
•
APPLICATION
Internal grid mounting system and PROLINE frame compatible
for easy and fast panel installation
Enclosure with contents to support Standard Duty 500Kg (1102
lb.) evenly distributed and Heavy Duty 1000Kg (2205 lb.) evenly
distributed
Uni-body design with seams continuously welded and ground
smooth
Two-door enclosures provided with a removable center-post for
easy panel installation
Heavy-duty stainless steel lifting eyes
Heavy-duty three-point latching mechanism operated by 316L
stainless steel POWERGLIDE padlocking handle
S eamless foam-in-place gasket assures a water-tight and dusttight seal
Body flange trough collar channels liquids and contaminants
away from door opening and installed equipment
Removable hidden hinges
Built-in plinth base that allows for flexible cable entry
Gland plate on the bottom offers cable entry options
P ainted or galvanized back panels can be rear-mounted in
single-access enclosures and back-to-back in dual access
enclosures
Bonding provision on door
•
These enclosures are used in harsh industrial environments to
house large components such as motor starters, drives, contactors
•
and PLCs as well as a wide range of other electrical and electric
equipment. A modular interior rail system (PROLINE) provides an
•
extensive range of mounting options. Whether your application
calls for rack mounting, panel mounting or grid system mounting, a •
•
combination of PROLINE components can deliver the right solution
for ultimate equipment mounting flexibility and convenience. Three- •
point latching and sealing provide industry-leading protection from
dust, oil and water. The FS66S enclosures are used extensively
•
in oil and gas, water/wastewater, petrochemical and power
plant environments and offer a perfect solution to outdoor DCS
FINISH
applications.
Enclosures are unpainted. Cover, sides, top and bottom have
smooth #4 brushed finish.
Four styles are available to provide maximum flexibility:
1. One-Door Single-Access Enclosures (single door on front)
2. One-Door Dual-Access Enclosures (single door on front and
rear)
3.Two-Door Single-Access Enclosures (doors close on a
removable center-post)
4.Two-Door Dual-Access Enclosures (doors close on a
removable center-post on front and rear)
Each style is also offered in 304 or 316L stainless steel, and can
be manufactured as standard duty (14 gauge) and heavy duty (12
gauge).
ACCESSORIES
Window kits
Door stop kit
High-impact thermoplastic data pocket
ATEX accessories (i.e. purge & pressurization)
See next pages for selection matrix
See Hoffman PROLINE internal accessories for a complete list
MODIFICATION AND CUSTOMIZATION
Hoffman excels at modifying and customizing products to
your specifications. Contact your local Hoffman sales office or
distributor for complete information.
Bulletin: FS66S
1
Stainless Steel
SUBJECT TO CHANGE WITHOUT NOTICE
Pentair Electrical
Spec-01073 C
Floor-Mount and Free-Stand Enclosures Floor-Mount and Free-Stand Enclosures
Standard Product One-Door, Single-Access Enclosures
Catalog Number
FS180654SSP0
Nominal AxBxCA x B x C
1800x600x500
FS180654SHP0
1800x600x500
FS180656SSP0
1800x600x500
FS180656SHP0
1800x600x500
FS181054SSP0
1800x1000x500
FS181054SHP0
1800x1000x500
FS181056SSP0
1800x1000x500
FS181056SHP0
1800x1000x500
FS200884SSP0
2000x800x800
FS200884SHP0
2000x800x800
FS200886SSP0
2000x800x800
FS200886SHP0
2000x800x800
AxBxC in./mm
73.92 x 24.26 x 19.03
1879 x 616 x 483
73.97 x 24.32 x 19.11
1879 x 618 x 485
73.92 x 24.26 x 19.03
1878 x 616 x 483
73.97 x 24.32 x 19.11
1879 x 618 x 485
73.92 x 40.01 x 19.06
1878 x 1016 x 484
73.97 x 40.06 x 19.11
1879 x 1018 x 485
73.92 x 40.01 x 19.06
1878 x 1016 x 484
73.97 x 40.06 x 19.11
1879 x 1018 x 485
81.79 x 32.14 x 30.84
2078 x 816 x 783
81.84 x 32.19 x 30.92
2079 x 818 x 785
81.79 x 32.14 x 30.84
2078 x 816 x 783
81.84 x 32.19 x 30.92
2079 x 818 x 785
Stainless Steel Type
304
Gauge
14
304
12
316L
14
316L
12
304
14
304
12
316L
14
316L
12
304
14
304
12
316L
14
316L
12
21('2256,1*/($&&(66
&
%
=
%
$
$
=
==
Pentair Electrical
Spec-01073 C
PH 763.422.2211 • pentairprotect.com/hoffman
Stainless Steel
2
Floor-Mount and Free-Stand Enclosures Floor-Mount and Free-Stand Enclosures
Standard Product One-Door, Dual Access Enclosures
Catalog Number
FS180654DSP0
Nominal AxBxC
1800x600x500
FS180654DHP0
1800x600x500
FS1800656DSP0
1800x600x500
FS180656DHP0
1800x600x500
FS181054DSP0
1800x1000x500
FS181054DHP0
1800x1000x500
FS181056DSP0
1800x1000x500
FS181056DHP0
1800x1000x500
FS200884DSP0
2000x800x800
FS200884DHP0
2000x800x800
FS200886DSP0
2000x800x800
FS200886DHP0
2000x800x800
AxBxC in./mm
73.92 x 24.26 x 20.15
1878 x 616 x 512
73.97 x 24.32 x 20.26
1879 x 618 x 515
73.92 x 24.26 x 20.15
1878 x 616 x 512
73.97 x 24.32 x 20.26
1879 x 618 x 515
73.92 x 40.01 x 20.15
1878 x 1016 x 512
73.97 x 40.06 x 20.26
1879 x 1018 x 515
73.92 x 40.01 x 20.15
1878 x 1016 x 512
73.97 x 40.06 x 20.26
1879 x 1018 x 515
81.79 x 32.14 x 31.97
2078 x 816 x 812
81.84 x 32.19 x 32.07
2079 x 818 x 815
81.79 x 32.14 x 31.97
2078 x 816 x 812
81.84 x 32.19 x 31.91
2079 x 818 x 811
21('225'8$/$&&(66
Stainless Steel Type
304
Gauge
14
304
12
316L
14
316L
12
304
14
304
12
316L
14
316L
12
304
14
304
12
316L
14
316L
12
&
%
=
%
$
$
=
==
3
Stainless Steel
SUBJECT TO CHANGE WITHOUT NOTICE
Pentair Electrical
Spec-01073 C
Floor-Mount and Free-Stand Enclosures Floor-Mount and Free-Stand Enclosures
Standard Product Two-Door, Single Access Enclosures
Catalog Number
FS201284SSP0
Nominal AxBxC
2000x1200x800
FS201284SHP0
2000x1200x800
FS201286SSP0
2000x1200x800
FS201286SHP0
2000x1200x800
AxBxC in./mm
81.79 x 47.89 x 30.87
2078 x 1216 x 784
81.84 x 47.94 x 30.92
2079 x 1218 x 785
81.79 x 47.89 x 30.87
2078 x 1216 x 784
81.84 x 47.94 x 30.92
2079 x 1218 x 785
Stainless Steel Type
304
Gauge
14
304
12
316L
14
316L
12
7:2'2256,1*/($&&(66
%
=
&
$
=
==
; ; Pentair Electrical
Spec-01073 C
PH 763.422.2211 • pentairprotect.com/hoffman
Stainless Steel
4
Floor-Mount and Free-Stand Enclosures Floor-Mount and Free-Stand Enclosures
Standard Product Two-Door, Dual Access Enclosures
Catalog Number
FS201284DSP0
Nominal AxBxC
2000x1200x800
FS201284DHP0
2000x1200x800
FS201286DSP0
2000x1200x800
FS201286DHP0
2000x1200x800
AxBxC in./mm
81.79 x 47.89 x 31.97
2078 x 1216 x 812
81.79 x 47.97 x 32.07
2078 x 1218 x 815
81.79 x 47.89 x 32.02
2078 x 1216 x 813
81.84 x 47.94 x 32.02
2079 x 1218 x 813
Stainless Steel Type
304
Gauge
14
304
12
316L
14
316L
12
7:2'225'8$/$&&(66
%
&
=
$
=
; ==
; 5
Stainless Steel
SUBJECT TO CHANGE WITHOUT NOTICE
Pentair Electrical
Spec-01073 C
Floor-Mount and Free-Stand Enclosures Floor-Mount and Free-Stand Enclosures
FS66S Panel, Rack and Grid Mounting Accessories
FS66S enclosures utilize PROLINE internal components to provide
an extensive range of mounting options. Whether your application
calls for rack mounting, panel mounting or grid system mounting, a
combination of PROLINE components can deliver the right solution.
Panel Mounting
A complete range of panel mounting options makes optimum use of
internal enclosure space.
• A wider door opening offers more usable space for component
mounting. Subpanels can be mounted front-to-back in 25-mm
increments
• P artial-height panels and swing-out panels offer additional
flexibility
Rack Mounting
If your application calls for 19-in., 23-in. or 24-in. mounted devices,
FS66S provides a solution.
• 19-in., 23-in. and 24-in. rack-mount accessories include shelves,
drawers and panels
• Adapter brackets allow rack angles to be used in wider cabinets
• P lated rack angles offer excellent conductivity for EMC-shielded
applications
Grid System Mounting
A variety of grid mounting options lets you mount components
directly on the frame. Vertical and horizontal grid straps extend the
internal framework while standard fasteners simplify installation
and allow multi-source access to fasteners.
Panel and Grid Mounting Accessories A (Nominal)
1800
1800
2000
2000
a
B (Nominal)
1000
600
800
1200
C (Nominal)
500
500
800
800
a
Full Subpanel
PPF1810
PPF186
PPF208
PPF2012
f
Swing-Out Panel
--PSP186
PSP208
PSP206
b
Center Upright
PCU18
--PCU20
PCU20
e
Transformer Rail
--PTR6
PTR8
PTR6
PTR12
One-Row
Grid Straps
Front-to-Backc
PGH1S5
PGH1S5
PGH1S8
PGH1S8
Three-Row
Grid Strap
Front-to-Backc
PGH3S5
PGH3S5
PGH3S8
PGH3S8
One-Row
Grid Straps
Left-to-Rightd
PGH1S11
PGH1S7
PGH1S9
PGH1S13
Three-Row
Grid Strap
Left-to-Rightd
PGH3S11
PGH3S7
PGH3S9
PGH3S13
Full Height Vertical Grid Strap
PGH3S18V
PGH3S18V
PGH3S20V
PGH3S20V
Mount to top and bottom of frame. Glide blocks position subpanel on frame bottom. Maximum size subpanel shown in chart
b
Center uprights are used in 800-mm wide and 1200-mm wide frames to allow mounting of accessories for 600-mm frames. These accessories include partial panels, swing-out panels, rack angles, rack angle accessories
and grid system components.
c
Grid system straps fit horizontally from front to back on frame top and bottom openings.
d
Grid straps and transformer rails fit horizontally from right to left between grid straps or holes in frames.
e
Use clamping nut package catalog number APS1420CN (1/4-20) or catalog number APS1618CN (5/16-18) for additional mounting options.
f
Requires center upright to install.
Rack Mounting Accessories 19-in.
Full-Height.
Rack Angles
A (nominal) B (nominal) Square Hole
1800
600
PRA1918TH
1800
1000
PRA1918TH
19-in.
Full-Height.
Rack Angles
Tapped
PRA1918TP
PRA1918TP
23-in.
Full-Height
Rack Angles
Tapped
-----
24-in.
Full-Height
Rack Angles
Square Hole
--PRA2418TH
24-in.
Full-Height
Rack Angles
Tapped
--PRA2418TP
Frame
Reducing
Brackets
19-in.
Centered
--PRB200
Frame
Reducing
Brackets
19-in.
Justified
-----
Frame
Reducing
Brackets
23-in.
Centered
-----
Frame
Reducing
Brackets
23-in.
Justified
-----
Frame
Reducing
Brackets
24-in.
Centered
-----
2000
800
PRA1920TH
PRA1920TP
PRA2320TP
PRA2420TH
PRA2420TP
PRB100
PRB200
PRB50
PRB100
2000
1200
PRA1920TH
PRA1920TP
---
---
---
---
---
---
---
Frame
Accessory
Brackets
19-in.
PFB19
PFB19
Frame
Accessory
Brackets
24-in.
--PFB24
PRB50
Frame
Reducing
Brackets
24-in.
Justified
--PRB100
PRB50
PRB100
PFB19
PFB24
---
---
PFB19
---
Rack Angles
Available
19-in.
19-in.
24-in.
19-in.
24-in.
19-in.
Pentair Electrical
Spec-01073 C
PH 763.422.2211 • pentairprotect.com/hoffman
Stainless Steel
6
Floor-Mount and Free-Stand Enclosures Floor-Mount and Free-Stand Enclosures
Full Subpanel
•
•
•
•
•
•
All necessary mounting hardware is included
Subpanels are 12 gauge (2.5-mm) steel (subpanels for doublebay enclosures 1400-mm tall or taller are 10 gauge steel), have
flanges on all sides and are painted white
Conductive subpanels are unpainted galvanized steel
Subpanels can be mounted at nearly any depth in 25-mm
increments
Mounting hardware attaches to the top or to the sides of the
frame
Additional Mounting Hardware (catalog number PMKPF) is
available for applications requiring more support in the center
or bottom of the subpanel. This is required if the enclosure will
be tipped in transit or if the panel is not located at the bottom of
the enclosure on the glide blocks. In addition, 3-row grid straps
are required for installation unless the panel is in the rearmost
position.
Bulletin: P20
Full Subpanel PROLINE subpanels are designed to provide maximum panel depth,
panel size and ease of installation. Full subpanels slide into the
frame on nylon glide blocks, which support the entire weight of the
subpanel.
Panel Support Brace
Panel Support Braces give
additional support to single- and
double-bay panels in heavy loading
applications and minimize the
vibration created by components
mounted on the panel. Braces can
be installed on existing systems
without removing the panel. Panel
support braces are furnished
in pairs. Braces are unpainted
galvanized steel.
Catalog Number
PPF186
Material
Steel
PPF1810
Steel
PPF208
Steel
PPF2012
Steel
H
mm/in.
1685
66.34
1685
66.34
1885
74.21
1885
74.21
W
mm/in.
530
20.87
930
36.61
730
28.74
1130
44.49
Additional Mounting Hardware Catalog Number
PMKPF
Catalog Number
PSB10
PSB12
PSB16
PSB18
Description
Additional Side Mounting Hardware (see Detail in drawing)
L (mm)
911
1111
1511
1711
L (in.)
35.87
43.74
59.49
67.36
Fits Panel Width (mm)
1000
1200
1600
1800
Bulletin: P20
7
Stainless Steel
SUBJECT TO CHANGE WITHOUT NOTICE
Pentair Electrical
Spec-01073 C
Floor-Mount and Free-Stand Enclosures Floor-Mount and Free-Stand Enclosures
Partial Subpanel
Partial Subpanels are 12 gauge
steel, have flanges on four sides
and are painted white. Panels can
be positioned vertically in 25mm increments and also can be
positioned at any depth in 25-mm
increments using the optional grid
straps. Conductive subpanels are
unpainted galvanized steel. All
necessary mounting hardware is
included.
Bulletin: P20
Catalog Number
PPP46
PPP46G
PPP47
PPP47G
PPP48
PPP48G
PPP412
PPP412G
PPP86
PPP86G
PPP87
PPP88
PPP88G
PPP810
PPP810G
PPP96
PPP96G
PPP97
PPP97G
PPP98
PPP98G
PPP910
PPP910G
PPP106
PPP106G
PPP108
PPP108G
PPP116
PPP116G
Material
Steel
Conductive
Steel
Conductive
Steel
Conductive
Steel
Conductive
Steel
Conductive
Steel
Steel
Conductive
Steel
Conductive
Steel
Conductive
Steel
Conductive
Steel
Conductive
Steel
Conductive
Steel
Conductive
Steel
Conductive
Steel
Conductive
H (mm)
360
360
360
360
360
360
360
360
735
735
735
735
735
735
735
835
835
835
835
835
835
835
835
935
935
935
935
1035
1035
Transformer Rails
H (in.)
14.17
14.17
14.17
14.17
14.17
14.17
14.17
14.17
28.94
28.94
28.94
28.94
28.94
28.94
28.94
32.87
32.87
32.87
32.87
32.87
32.87
32.87
32.87
36.81
36.81
36.81
36.81
40.75
40.75
W (mm)
530
530
630
630
730
730
1130
1130
530
530
630
730
730
930
930
530
530
630
630
730
730
930
930
530
530
730
730
530
530
W (in.)
20.87
20.87
24.80
24.80
28.74
28.74
44.49
44.49
20.87
20.87
24.80
28.74
28.74
36.61
36.61
20.87
20.87
24.80
24.80
28.74
28.74
36.61
36.61
20.87
20.87
28.74
28.74
20.87
20.87
Fits Frame
700 mm or taller
700 mm or taller
700 mm or taller
700 mm or taller
700 mm or taller
700 mm or taller
700 mm or taller
700 mm or taller
1400 mm or taller
1400 mm or taller
1400 mm or taller
1400 mm or taller
1400 mm or taller
1400 mm or taller
1400 mm or taller
1400 mm or taller
1400 mm or taller
1400 mm or taller
1400 mm or taller
1400 mm or taller
1400 mm or taller
1400 mm or taller
1400 mm or taller
1400 mm or taller
1400 mm or taller
1400 mm or taller
1400 mm or taller
1400 mm or taller
1400 mm or taller
FEATURES
•
•
Installed side-to-side in the frame for component mounting
Includes four M10 clamping nuts and bolts to attach equipment
to rails
SPECIFICATIONS
•
•
Rails slotted to fit the integral mounting holes in the frame
All mounting hardware included
FINISH
Plated
Bulletin: P20
APPLICATION
Catalog Number
PTR6
PTR8
PTR12
Length (mm)
534
734
1134
Length (in.)
21.02
28.90
44.65
Fits Frame Width (mm)
600
800
1200
Transformer Rails are used to mount heavy components and
transformers in the bottom of an enclosure.
Pentair Electrical
Spec-01073 C
PH 763.422.2211 • pentairprotect.com/hoffman
Stainless Steel
8
Floor-Mount and Free-Stand Enclosures Floor-Mount and Free-Stand Enclosures
Swing-Out Panel
Swing-Out Panels allow a front-mounted panel to pivot out of an
enclosure frame opening. This accessory includes a white panel
and all the necessary hardware.
• Swing-Out Panels are available for 600-, 700- and 800-mm wide
enclosures
• P anels provide 170 degrees of rotation, with capability to hinge
from the right or left side
• Spring-loaded pivot post allows for easy installation
• Supports have a white finish. Hinge blocks are anodized black.
• Q uarter-turn latches are provided to secure the Swing-Out Panel
in the closed position
Bulletin: P20
Catalog Number
PSP186
PSP206
PSP208
H
mm/in.
1638
64.49
1838
72.36
1838
72.36
Grounding Bar System
W
mm/in.
515
20.28
515
20.28
715
28.15
Fits Frame
1800 or taller
Fits Frame Width
600
2000 or taller
600
2000 or taller
800
APPLICATION
Three sizes of grounding bars and insulated mounting brackets
are available. Bars are plated copper with M6 and M5 tapped
holes to provide a common point for grounding equipment. Fits all
enclosures if mounted vertically. See table for horizontal mounting.
Bulletin: P20
Catalog Number
PGS2K
PGS4K
INDUSTRY STANDARDS
UL Component Recognized; File No. E61997
9
Stainless Steel
PGS6K
Description
Fits 400-mm deep frame
front-to-back horizontally
Fits 600-mm deep frame
front-to-back horizontally
Fits 800-mm deep frame
front-to-back horizontally
SUBJECT TO CHANGE WITHOUT NOTICE
Length
mm/in.
200
7.87
400
15.75
600
23.62
Number of
Holes and
Screws M6
3/5
Number of
Holes and
Screws M5
10/10
9/11
20/20
15/17
30/31
Pentair Electrical
Spec-01073 C
Floor-Mount and Free-Stand Enclosures Floor-Mount and Free-Stand Enclosures
PROLINE Fastener Packages
Use to fasten components to the
grid system. PGF Packages include
20 front-loading clip nuts (M6) and
20 combination-drive washer-head
bolts (M6).
Grounding Package is used with
the rectangular holes in the
PROLINE frame to provide electrical
continuity between the frame and
the grid system. ASM5T Package is
used with PROLINE frames having
round holes. Package includes 20
M5 self-tapping screws.
Catalog Number
ASM5T
PGFM6
PGFGM6
Description
M5 x 12 mm thread-forming Phillips hex head screws
Standard Package - M6 cage nuts and bolts
Grounding Package - M6 grounding cage nuts and bolts
Use in
Round holes
Rectangular holes
Tapped holes
Pkg. Qty.
20
20
20
Bulletin: DACCY, P20
Grounding Kit
The Grounding Kit allows a PROLINE
or PROLINE G2 enclosure to be
grounded to VDE specifications.
Includes six 12-gauge wires 411 mm
(16.19) long with ring terminations
and M6 mounting hardware.
Catalog Number
PGK
Wire
Size
12 ga.
Length Between
Ring Terminals
mm/in.
411
16.19
Ring Terminal
Hole Diameter
mm/in.
7
.29
Bulletin: P20
Stop Arm Kit
Used with Heavy-Duty Swing-Out Rack Frames to lock the frame in
the open position. Consists of stop arm and mounting hardware.
Bulletin: P20
Catalog Number
PSAK120
Description
120-degree Stop Arm Kit
Screw Package
Twenty plated screws are included in each package. Screws attach
rack panels to rack mounting angles. Available in #10-32, #12-24,
M5 and M6.
Bulletin: A80, DACCY, X20
Cage Nut Package
Twenty plated cage nuts are included in each package. Available
in #10-32, #12-24, M5 and M6, these cage nuts fit all PROLINE and
PROLINE G2 rack angles with square holes.
Bulletin: DACCY
Catalog Number
AS1032
ES1224
ASM5
ASM6
ASM6250
Description
10-32 x .75
12-24 x .5
Metric M5 x 20
Metric M6 x 16
Metric M6 x 16
Pkg. Qty.
20
20
20
20
250
Catalog Number
P1032CN
P1224CN
PM5CN
PM6CN
Description
10-32 thread
12-24 thread
Metric M5 thread
Metric M6 thread
Pkg. Qty.
20
20
20
20
Filler Panel for Rack Angles
Filler Panels are used to completely fill 19-in. rack mounting spaces
at top and bottom of PROLINE door opening. Extruded aluminum
Filler Panels are furnished in pairs and include mounting hardware.
Bulletin: P20
Catalog Number
PFP19RA
Pentair Electrical
Spec-01073 C
Description
Filler Panel for Rack Angles
PH 763.422.2211 • pentairprotect.com/hoffman
Stainless Steel
10
Floor-Mount and Free-Stand Enclosures Floor-Mount and Free-Stand Enclosures
Wire Management Rails
Wire Management Rails are 14 gauge steel with a plated finish.
They feature a unique hole pattern that allows either wire ties or
fasteners to secure wires in place. Frame-mounting hardware is
included. One package contains 20 rails.
Bulletin: P20
Catalog Number
PWMR4
PWMR5
PWMR6
PWMR8
PWMR9
L (mm)
304
404
504
704
775
Fits Frame
Depth
400
500
600
800
900
L (in.)
12.0
15.9
19.8
27.7
30.51
Grid System
Grid Strap installation (side to side)
Grid strap installation
(vertical and horizontal grid straps)
Full-height vertical grid strap
A Grid System provides a flexible extension to the internal mounting system already furnished with the PROLINE frame. The Grid System
allows flexible mounting capabilities in height, width and depth. Accessories or equipment can be attached directly to the Grid System
using either cage nuts or front-loading cage nuts.
Full-Height Vertical Grid Straps
Grid Straps provide a vertical
extension of the frame holes in the
sides of the PROLINE frame. They
are sold in pairs with mounting
hardware included. Vertical Grid
Straps are 14 gauge plated steel.
Three-row 25-mm hole spacing
allows the use of cage nuts or frontloading cage nuts.
Catalog Number
PGH3S7V
PGH3S14V
PGH3S16V
PGH3S18V
PGH3S20V
PGH3S22V
L (mm)
595
1295
1495
1695
1895
2095
L (in.)
23.43
50.98
58.86
66.73
74.61
82.48
Fits Frame Height
700
1400
1600
1800
2000
2200
Bulletin: P20
11
Stainless Steel
SUBJECT TO CHANGE WITHOUT NOTICE
Pentair Electrical
Spec-01073 C
Floor-Mount and Free-Stand Enclosures Floor-Mount and Free-Stand Enclosures
Grid Straps
Grid Straps are 14 gauge plated steel. They are provided with
specially designed rectangular holes to allow the use of cage nuts
or front-loading cage nuts. Mounting holes are provided on 25-mm
centers. Grid Straps are available with either 1 row or 3 rows of
holes and are furnished in pairs. Mounting hardware to attach Grid
Straps to the frame or to other Grid Straps is included.
• C an be mounted front-to-back horizontally across the bottom or
sides of the PROLINE frame
• C an be mounted left-to-right horizontally between front-to-back
pairs or from the sides of the PROLINE frame
• C an be mounted vertically between horizontally mounted Grid
Straps
Catalog Number
PGH1S5
PGH1S6
PGH1S7
PGH1S8
PGH1S9
PGH1S10
PGH1S11
PGH1S13
PGH1S17
PGH3S4
PGH3S5
PGH3S6
PGH3S7
PGH3S8
PGH3S9
PGH3S10
PGH3S11
PGH3S12
PGH3S13
PGH3S17
Hole Pattern
One Row
One Row
One Row
One Row
One Row
One Row
One Row
One Row
One Row
Three Row
Three Row
Three Row
Three Row
Three Row
Three Row
Three Row
Three Row
Three Row
Three Row
Three Row
Catalog Number
PG4
PG5
PG6
PG8
PG9
L (mm)
218
319
420
621
823
L (mm)
342
442
542
642
742
842
942
1142
1542
242
342
442
542
642
742
842
942
1242
1142
1542
L (in.)
13.46
17.40
21.34
25.28
29.21
33.15
37.08
44.96
60.71
9.53
13.46
17.40
21.34
25.28
29.21
33.15
37.08
48.89
44.96
60.71
Fits Frame
Depth
500
600
700
800
900
1000
—
—
—
400
500
600
700
800
900
1000
1100
1200
—
—
Fits Frame
Width
—
—
600
700
800
900
1000
1200
1600
—
—
—
600
700
800
300
1000
—
1200
1600
Bulletin: DPY, P20
Guides
Equipment Guides help support rack-mounted equipment during
installation. Guides mount between two pairs of rack angles.
Slotted holes are provided for vertical or lateral adjustment.
Furnished in pairs. Guides have plated finish. Mounting hardware
included.
Rack accessories that are shorter than the enclosure depth can be
mounted to rack angles using Adjustable Rack-Mount Rails or Grid
Straps. Order these items separately.
Bulletin: P20
Pentair Electrical
Spec-01073 C
PH 763.422.2211 • pentairprotect.com/hoffman
L (in.)
8.80
12.56
16.54
24.45
32.40
Frame Depth (mm)
400
500
600
800
900
Frame Depth (in.)
15.75
19.68
23.62
31.49
35.43
Stainless Steel
12
Floor-Mount and Free-Stand Enclosures Floor-Mount and Free-Stand Enclosures
Partial Swing-Out Rack Frame
SPECIFICATIONS
•
•
•
urnished with hinges, two quarter-turn latches and mounting
F
hardware
Furnished with hinges, two quarter-turn latches and mounting
hardware
Complies with ANSI/EIA RS-310-D rack mounting standards
1. Swing-Out Rack Frame assemblies are supplied with
mounting supports. Swing-Out Rack Frames can also be
installed in right, left or both bays of 1200-mm wide frames
using center uprights.
2. Swing-out mounting supports mount to inside of frame at
any vertical location.
3. Mounting supports and swing-out frame can be located
deeper into frame using grid system straps. Deeper
mounting affects the degree of opening of swing-out frame.
FINISH
•
•
olyester powder paint; RAL 7035 textured light gray standard
P
Custom colors available
LOAD RATING
Maximum load rating is 100 lb (45 kg)
Bulletin: P20
W (mm)
507
697
Catalog Number
PSF6
PSF8
Fits Frame
Width (mm)
600
800
W (in.)
20.0
27.4
Rack
Units
16
16
:
APPLICATION
This 19-in. Rack Frame is used when a smaller, medium-duty
swing-out frame is desired. Light-weight rack equipment fits nicely
into this 800-mm tall swing-out frame, providing 90 degrees of
rotation and increased accessibility.
FEATURES
•
•
ide hinge brackets are used to mount the swing frame, allowing
S
free access above and below the swing frame
Used with any height enclosure and hinged on the right or left
Fixed Shelf
Fixed Shelves mount to the front and back rack angles. The shelf is
14 gauge steel with adjustable 12 gauge steel supports. Adjustable
to fit multiple-depth enclosures or rack angle placements. Entire
assembly is finished with RAL 7035 textured light-gray polyester
powder paint. Load rating is 150 lb. (68 kg).
Rack accessories that are shorter than the enclosure depth can be
mounted to rack angles or frame accessory brackets attached to grid
straps. Order these items separately.
Bulletin: P20
13
Stainless Steel
Catalog Number
P19SH4
P19SH5
P19SH6
P19SH8
P19SH9
P23SH4
P23SH5
P23SH6
P23SH8
P23SH9
P24SH5
P24SH6
P24SH8
P24SH9
D (mm)
249
349
449
649
749
249
349
449
649
749
349
449
649
749
SUBJECT TO CHANGE WITHOUT NOTICE
D (in.)
9.80
13.74
17.68
25.55
29.49
9.80
13.74
17.68
25.55
29.49
13.74
17.68
25.55
29.49
E (mm)
164.8
264.8
364.8
564.8
664.8
170
270
370
570
670
264.8
364.8
564.8
664.8
E (in.)
6.49
10.43
14.36
22.24
26.17
6.69
10.63
14.57
22.44
26.38
10.43
14.36
22.24
26.17
F (mm)
218.4
318.4
418.4
618.4
718.4
223.6
323.6
423.6
623.6
723.6
318.4
418.4
618.4
718.4
F (in.)
8.60
12.54
16.47
24.35
28.28
8.80
12.74
16.68
24.55
28.49
12.54
16.47
24.35
28.28
J (mm)
477
477
477
477
477
578.6
578.6
578.6
578.6
578.6
604
604
604
604
J (in.)
18.78
18.78
18.78
18.78
18.78
22.78
22.78
22.78
22.78
22.78
23.78
23.78
23.78
23.78
Fits Rack
Width
19 in.
19 in.
19 in.
19 in.
19 in.
23 in.
23 in.
23 in.
23 in.
23 in.
24 in.
24 in.
24 in.
24 in.
Pentair Electrical
Spec-01073 C
Floor-Mount and Free-Stand Enclosures Floor-Mount and Free-Stand Enclosures
Heavy-Duty Swing-Out Rack Frame
•
•
•
•
•
•
•
•
•
Allows 19-in. rack equipment to pivot out of the enclosure frame
for better accessibility. The frames mount on hinges capable of
120-degree rotation. Hinges that provide 170-degree rotation are
optional.
Spring-loaded pivot post makes installation easy
Rack Frames are available for 600-, 700- and 800-mm wide
enclosure frames
Mounting supports for an 800-mm wide enclosure frame permit
you to either center the rack-mounting frame or position it right
or left. The frame can also pivot from either the left or the right
for maximum flexibility.
Mounting supports can be assembled to the top and bottom of
the frame for full-height rack-mounting frames. Smaller rackmounting frames can be mounted to the vertical frame members
or to the grid straps. Order separately.
Furnished with hinges, two quarter-turn latches and mounting
hardware RAL 7035 textured gray finish
Complies with ANSI/EIA RS-310-D rack-mounting standards
Maximum equipment load is 300 lb.
Mounting holes accommodate either English or metric cage nuts,
which are ordered separately
1. Swing-Out Rack Frame assemblies are supplied with mounting
supports. Swing-Out Rack Frames can also be installed in
right, left or both bays of 1200-mm wide frames using center
uprights.
2. Swing-out mounting supports mount to inside of frame at any
vertical location.
3. Mounting supports and swing-out frame can be located deeper
into frame using grid system straps. Deeper mounting affects
the degree of opening of swing-out frame.
Bulletin: P20
Catalog Number
PSF76
PSF77
PSF78
PSF146
PSF148
PSF166
PSF168
PSF186
PSF188
PSF206
PSF207
PSF208
PSF226
PSF227
PSF228
Pentair Electrical
Spec-01073 C
H
mm/in.
538
21.18
538
21.18
538
21.18
1215
47.83
1215
47.83
1438
56.61
1438
63.58
1615
63.58
1615
63.58
1838
72.36
1838
72.36
1838
72.36
2015
79.33
2015
79.33
2015
79.33
W
mm/in.
496
19.53
496
19.53
496
19.53
496
19.53
496
19.53
496
19.53
496
19.53
496
19.53
496
19.53
496
19.53
496
19.53
496
19.53
496
19.53
496
19.53
496
19.53
Rack
Units
10
Fits Frame
Height
700 or taller
Fits Frame
Width
600
10
700 or taller
700
10
700 or taller
800
25
1400 or taller
600
25
1400 or taller
800
30
1600 or taller
600
30
1600 or taller
800
34
1800 or taller
600
34
1800 or taller
800
39
2000 or taller
600
39
2000 or taller
700
39
2000 or taller
800
43
2200 tall
600
43
2200 tall
700
43
2200 tall
800
PH 763.422.2211 • pentairprotect.com/hoffman
Stainless Steel
14
Floor-Mount and Free-Stand Enclosures Floor-Mount and Free-Stand Enclosures
15
Stainless Steel
SUBJECT TO CHANGE WITHOUT NOTICE
Pentair Electrical
Spec-01073 C
Floor-Mount and Free-Stand Enclosures Floor-Mount and Free-Stand Enclosures
170-Degree Hinge Kit
Use this kit in conjunction with the Heavy-Duty Swing-Out Frame. It
provides increased accessibility to the back of rack equipment.
Pentair Electrical
Spec-01073 C
Catalog Number
PSF170K
PH 763.422.2211 • pentairprotect.com/hoffman
Fits Cabinets
600, 700 and 800
Stainless Steel
16
Floor-Mount and Free-Stand Enclosures Floor-Mount and Free-Stand Enclosures
Swing-Out Guides
Guides can be mounted to a Heavy-Duty Swing-Out Rack Frame to
provide extra support for rack equipment. Plated steel guides are
furnished in pairs with mounting hardware included.
Bulletin: P20
Catalog Number
PSFG
Filler Panel Kit
Catalog Number
PFPK77LR
PFPK78LR
PFPK78C
PFPK147LR
PFPK148C
PFPK167LR
PFPK168LR
PFPK168C
PFPK187LR
PFPK188LR
PFPK188C
PFPK208LR
PFPK208C
PFPK227LR
PFPK228LR
PFPK228C
Description
Swing-Out Guides
Swing Frame
Height mm
700
700
700
1400
1400
1600
1600
1600
1800
1800
1800
2000
2000
2200
2200
2200
Enclosure
Width mm
700
800
800
700
800
700
800
800
700
800
800
800
800
700
800
800
Mounting
Left or Right
Left or Right
Center
Left or Right
Center
Left or Right
Left or Right
Center
Left or Right
Left or Right
Center
Left or Right
Center
Left or Right
Left or Right
Center
Used when mounting the PROLINE G2 Heavy-Duty Swing-Out Rack
Frames in 800-mm wide frames. The Filler Panel occupies the
extra space between the frame and the swing frame. Includes a
handle and all the hardware for mounting to the Swing-Out Rack
Frame.
Bulletin: P20
17
Stainless Steel
SUBJECT TO CHANGE WITHOUT NOTICE
Pentair Electrical
Spec-01073 C
Floor-Mount and Free-Stand Enclosures Floor-Mount and Free-Stand Enclosures
Frame Pull-Out Shelf
Frame Pull-Out Shelf allows easy
access to shelf-mounted devices.
The shelf is 16 gauge steel with 12
gauge steel supports. The entire
assembly is finished with RAL 7035
textured gray polyester powder
paint. The shelf mounts to the front
and rear frame uprights. Load rating
is 110 lb. (50 kg).
Catalog Number
PFSHP66
PFSHP68
PFSHP86
PFSHP88
D (mm)
461
661
461
661
D (in.)
18.15
26.02
18.15
26.02
J (mm)
475
475
675
675
J (in.)
18.70
18.70
26.58
26.58
Shelf Extension (mm)
450
670
450
670
Shelf Extension (in.)
17.72
26.38
17.72
26.38
Bulletin: P20
Frame Shelf
Vented Frame Shelf mounts to the vertical hole pattern on a frame
and provides a stationary surface for equipment. The shelf is 16
gauge steel finished with RAL 7035 textured gray polyester powder
paint.
Catalog Number
PFSH75
PFSH76
PFSH78
PFSH84
PFSH85
PFSH86
PFSH88
PFSH89
PFSH104
PFSH105
PFSH106
PFSH108
D (mm)
400
500
700
300
400
500
700
800
300
400
500
700
D (in.)
15.75
19.68
27.56
11.81
15.75
19.68
27.56
31.50
11.81
15.75
19.68
27.56
W (mm)
648
648
648
748
748
748
748
748
948
948
948
948
W (in.)
25.51
25.51
25.51
29.45
29.45
29.45
29.45
29.45
37.32
37.32
37.32
37.32
Bulletin: P20
Catalog Number
PFSH64
PFSH65
PFSH66
PFSH68
PFSH69
D (mm)
300
400
500
700
800
D (in.)
11.81
15.75
19.68
27.56
31.50
W (mm)
548
548
548
548
548
W (in.)
21.57
21.57
21.57
21.57
21.57
Printer Shelf
The Printer Shelf is used for supporting a continuous feed printer.
The shelf mounts directly to a PROLINE frame. Paper shelves
are vertically adjustable. The entire unit slides out 17 in. from the
enclosure, allowing easy accessibility. Fits 600- or 800-mm wide
frames that are 600-mm or more deep.
Bulletin: P20
Catalog Number
PPSH66
PPSH86
Fits (mm)
600 x 600 or 600 x 800
800 x 600 or 800 x 800
W (mm)
464
663
W (in.)
18.27
26.10
PPSH66 can be installed with paper slots positioned front and back or right and left.
Grid straps are required when mounting printer shelf in frames deeper than 600 mm.
Pentair Electrical
Spec-01073 C
PH 763.422.2211 • pentairprotect.com/hoffman
Stainless Steel
18
Floor-Mount and Free-Stand Enclosures Floor-Mount and Free-Stand Enclosures
Door-Activated Light Switch Kit
Door-activated switch mounts to
the frame and includes mounting
hardware. Mounting plate is 14
gauge steel with a plated finish.
Catalog Number
PLFSWD
Description
Door-activated light switch kit
Bulletin: P20
Rack Angles Overview
Rack Angles can be mounted directly to the enclosure frame or on
grid system straps at almost any depth location. Rack Angles are
plated. All mounting hardware to install Rack Angles is included.
(Order cage nuts for square hole Rack Angles separately.)
• The standard rack angle position is 44 mm behind the door
opening. Rack Angles can be moved forward if desired. Deeper
positions require the use of Grid Straps. 1200-mm and 1600-mm
frames require center uprights to mount Rack Angles in right bay
or left bay.
• Shelves, drawer, guides and pull-out shelves require two sets of
Rack Angles or frame accessory brackets installed in the frame.
All Rack Angles have two mounting surfaces that serve as mounts
for both rack equipment and rack accessories. Rack Angles are
furnished in pairs and are available with tapped holes that directly
accommodate 10-32 screws or square holes for use with cage nuts
and M5, M6 or 10-32 screws. Rack Angles comply with ANSI/EIA
RS-310-D rack mounting standards.
19-in. Rack Angles
19-in. U-Shaped Rack Angles are
available in square-hole and tappedhole designs. Tapped Rack Angles
are 12 gauge plated steel with 10-32
tapped holes. Square-Hole Rack
Angles are 14 gauge plated steel
designed to accept metric or English
cage nuts. 19-in. Rack Angles are
fixed directly into a 600-mm wide
enclosure frame. To mount 19-in.
Rack Angles in 700- or 800-mm
wide frames, use frame reducing
brackets.
Bulletin: P20
Static Load Notes
It is important to comply with manufacturers’ recommendations for
rack mounting support.
Follow mounting directions for individual equipment.
Max. 20 lb. (9.1 kg) per rack unit for equipment under 20 in. (508
mm) deep.
Equipment over 20 in. (508 mm) deep or over 20 lb. (9.1 kg) per rack
unit requires rear support.
Catalog Number
PRA197TH
PRA197TP
PRA198TH
PRA198TP
PRA1914TH
PRA1914TP
PRA1916TH
PRA1916TP
PRA1918TH
PRA1918TP
PRA1920TH
PRA1920TP
PRA1922TH
PRA1922TP
Hole
Square
Tapped
Square
Tapped
Square
Tapped
Square
Tapped
Square
Tapped
Square
Tapped
Square
Tapped
H (mm)
578
578
712
712
1290
1290
1467
1467
1690
1690
1867
1867
2090
2090
H (in.)
22.77
22.77
28.02
28.02
50.77
50.77
57.77
57.77
66.52
66.52
73.52
73.52
82.27
82.27
Fits Frame
700 mm
700 mm
800 mm
800 mm
1400 mm
1400 mm
1600 mm
1600 mm
1800 mm
1800 mm
2000 mm
2000 mm
2200 mm
2200 mm
Rack Units
13
13
16
16
29
29
33
33
38
38
42
42
47
47
Vertical holes spaced in 1.75-in. (44.5-mm) increments.
19
Stainless Steel
SUBJECT TO CHANGE WITHOUT NOTICE
Pentair Electrical
Spec-01073 C
Floor-Mount and Free-Stand Enclosures Floor-Mount and Free-Stand Enclosures
23-in. Rack Angles
23-in. Rack Angles are available
for telecom applications. They fit
directly into 700-mm wide frames
or into 800-mm wide frames using
frame reducing brackets. Rack
Angles are 12 gauge steel with 10-32
tapped holes. 23-in. Rack Angles are
available with 1.00-in. vertical hole
spacing.
Bulletin: P20
Catalog Number
PRA237TP
Hole
Tapped
PRA2314TP
Tapped
PRA2316TP
Tapped
PRA2318TP
Tapped
PRA2320TP
Tapped
PRA2322TP
Tapped
Height
mm/in.
584
22.99
1270
50.00
1473
57.99
1676
65.98
1879
73.98
2083
82.00
Fits Frame Height
700 mm or taller
Rack Units
13
1400 mm or taller
29
1600 mm or taller
33
1800 mm or taller
38
2000 mm
42
2200 mm
42
Vertical holes spaced in 1.00 in. (25.4mm) increments.
24-in. Rack Angles
24-in. Rack Angles are available in
both square-hole and tapped-hole
designs. Tapped Rack Angles are 12
gauge plated steel with 10-32 tapped
holes. Square-Hole Rack Angles are
14 gauge plated steel designed to
accept metric or English cage nuts.
24-in. Rack Angles fit directly into
700- or 800-mm wide frames using
frame reducing brackets.
Bulletin: P20
Catalog Number
PRA247TH
PRA247TP
PRA2414TH
PRA2414TP
PRA2416TH
PRA2416TP
PRA2418TH
PRA2418TP
PRA2420TH
PRA2420TP
PRA2422TH
PRA2422TP
Hole
Square
Tapped
Square
Tapped
Square
Tapped
Square
Tapped
Square
Tapped
Square
Tapped
H (mm)
578
578
1245
1245
1467
1467
1690
1690
1867
1867
2090
2090
H (in.)
22.77
22.77
49.02
49.02
57.77
57.77
66.52
66.52
73.52
73.52
82.27
82.27
Fits Frame
700 mm
700 mm
1400 mm
1400 mm
1600 mm
1600 mm
1800 mm
1800 mm
2000 mm
2000 mm
2200 mm
2200 mm
Rack Units
13
13
29
29
33
33
38
38
42
42
47
47
Vertical holes spaced in 1.75-in. (44.5-mm) increments.
Pentair Electrical
Spec-01073 C
PH 763.422.2211 • pentairprotect.com/hoffman
Stainless Steel
20
Floor-Mount and Free-Stand Enclosures Floor-Mount and Free-Stand Enclosures
Metric Rack Angles
Metric U-Shaped Rack Angles are available with square holes
spaced vertically in 25-mm increments to accept metric or English
cage nuts. These Rack Angles are built in accordance with standard
IEC 917-2-1 to accommodate metric subracks. They are sized to fit
directly into 600-mm wide frames. Use frame reducing brackets to
mount in 700- or 800-mm wide frames.
Bulletin: P20
Catalog Number
PRAM7
PRAM14
PRAM16
PRAM18
PRAM20
PRAM22
H (mm)
575
1275
1475
1675
1875
2075
H (in.)
22.64
50.20
58.07
65.94
73.82
81.69
Fits Frame
Height
700 mm
1400 mm
1600 mm
1800 mm
2000 mm
2200 mm
Rack Units
22
29
33
38
42
47
Vertical holes spaced in 25-mm increments.
Rack Angle Adapter Bracket
Rack Angle Adapter Brackets
mount to PROLINE and PROLINE
G2 Rack Angles. They bring out
the rear leg mounting surface
to allow traditional Rack Mount
Slides (A16SL2U, sold separately)
to be used. Fits tapped or throughhole PROLINE and PROLINE G2
Rack Angles. Rack Angle Adapter
Brackets come in a quantity of four
and are 14 gauge steel. They have a
plated finish.
Catalog Number
PBRAA
Gauge
14
Use With
Rack-Mount Slides A16SL2U
Bulletin: P20
Frame Accessory Bracket
Frame Accessory Brackets mount
directly to the PROLINE frame and
are used in place of rack angles to
mount rack accessories such as
shelves and pull-out shelves. Frame
Accessory Brackets are furnished
in sets of four and are 14 gauge
plated steel. Mounting hardware is
included.
Catalog Number
PFB19
PFB23
PFB24
PFBM
Description
19-in. EIA spacing
23-in. EIA spacing
24-in. EIA spacing
Metric IEC 91721 spacing
D (mm)
36
36
22
36
D (in.)
1.42
1.42
0.87
1.42
'
Bulletin: P20
PP
PP
21
Stainless Steel
SUBJECT TO CHANGE WITHOUT NOTICE
Pentair Electrical
Spec-01073 C
Floor-Mount and Free-Stand Enclosures Floor-Mount and Free-Stand Enclosures
Rack Panels
Rack Panels are available in aluminum and painted steel. Aluminum
Rack Panels are .125-in.-thick 5052-H32 alloy. Steel Rack Panels
are 12 gauge steel and finished in RAL 7035 textured light-gray
polyester powder paint. All panels are flat with oblong holes
positioned at EIA standard spacing. Mounting hardware is sold
separately.
Bulletin: P20
Catalog Number
P19RP1UA
P19RP1UP
P19RP2UA
P19RP2UP
P19RP3UA
P19RP3UP
P19RP4UA
P19RP4UP
P19RP5UA
P19RP5UP
P19RP6UP
P19RP6UA
P19RP7UA
P19RP7UP
P19RP8UP
P19RP8UA
P19RP9UA
P19RP9UP
P19RP10UA
P19RP10UP
P19RP11UA
P19RP11UP
P19RP12UA
P19RP12UP
P19RP16UA
P19RP16UP
P23RP1UA
P23RP1UP
P23RP2UP
P23RP3UA
P23RP3UP
P23RP4UA
P23RP4UP
P24RP2UA
P24RP2UP
P24RP3UP
P24RP4UA
P24RP4UP
P24RP5UA
P24RP5UP
P24RP6UP
P24RP8UA
P23RP2UA
P24RP8UP
P24RP3UA
Pentair Electrical
Spec-01073 C
Material
Aluminum
Steel
Aluminum
Steel
Aluminum
Steel
Aluminum
Steel
Aluminum
Steel
Steel
Aluminum
Aluminum
Steel
Steel
Aluminum
Aluminum
Steel
Aluminum
Steel
Aluminum
Steel
Aluminum
Steel
Aluminum
Steel
Aluminum
Steel
Steel
Aluminum
Steel
Aluminum
Steel
Aluminum
Steel
Steel
Aluminum
Steel
Aluminum
Steel
Steel
Aluminum
Aluminum
Steel
Aluminum
Rack Angle Size
19 in.
19 in.
19 in.
19 in.
19 in.
19 in.
19 in.
19 in.
19 in.
19 in.
19 in.
19 in.
19 in.
19 in.
19 in.
19 in.
19 in.
19 in.
19 in.
19 in.
19 in.
19 in.
19 in.
19 in.
19 in.
19 in.
23 in.
23 in.
23 in.
23 in.
23 in.
23 in.
23 in.
24 in.
24 in.
24 in.
24 in.
24 in.
24 in.
24 in.
24 in.
24 in.
23 in.
24 in.
24 in.
PH 763.422.2211 • pentairprotect.com/hoffman
Rack Units
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9
9
10
10
11
11
12
12
16
16
1
1
2
3
3
4
4
2
2
3
4
4
5
5
6
8
2
8
3
Stainless Steel
22
Floor-Mount and Free-Stand Enclosures Floor-Mount and Free-Stand Enclosures
Adjustable Rack-Mounting Rails
Catalog Number
PBARA11B
PBARA12B
L (mm)
1011
1111
L (in.)
39.79
43.73
Fits Frame Depth
1100
1200
Finish
Painted RAL 9005 Black
Painted RAL 9005 Black
Mounting rails allow rack angles to be positioned anywhere within
the PROLINE frame. The left-to-right adjustment pertains only
when the enclosure is wider than the minimum width required for
rack angles. Includes two right-hand and two left-hand 12 gauge
plated or painted steel mounting rails. Mounting hardware is
included.
Bulletin: DPY, P20
Catalog Number
PBARA6
PBARA8
PBARA9
PBARA9B
PBARA10B
L (mm)
511
711
811
811
911
L (in.)
20.11
27.98
31.92
31.92
35.86
Fits Frame Depth
600
800
900
900
1000
Finish
Plated
Plated
Plated
Painted RAL 9005 Black
Painted RAL 9005 Black
Frame-Reducing Brackets for Frames or Grid
Straps
Frame-Reducing Brackets mount directly to 700- or 800-mm wide
PROLINE frames or to grid straps. Converts wider frames to 600mm wide, allowing 19-in. rack angles to fit, or to 700-mm wide,
allowing 23-in. rack angles to fit. Can be used to left- or right-justify
the rack-mounted equipment. Furnished in sets of four. 14 gauge
plated steel. Mounting hardware is included.
Bulletin: P20
Catalog Number
PRB50
Reduces
Frame
Width
50
W (mm)
50
W (in.)
1.97
PRB100
100
100
3.94
PRB200
200
200
7.87
23
Stainless Steel
Converts Frame Width
From 700 to 600
From 800 to 700 mm
From 800 to 600
From 800 to 700
From 700 to 600 mm
From 1000 to 600
From 1000 to 800
From 800 to 600 mm
SUBJECT TO CHANGE WITHOUT NOTICE
Pentair Electrical
Spec-01073 C
Floor-Mount and Free-Stand Enclosures Floor-Mount and Free-Stand Enclosures
Slides
Heavy-duty ball bearing, plated, three-section Slides are 16-in.
(406-mm) long and allow 17-in. (423-mm) extension. They are
attached to supports that mount between two pairs of rackmounting angles that have accessory mounting legs. Mounting
hardware is furnished. Equipment 16.75-in. (425-mm) wide can be
mounted between Slide assemblies installed on 19-in. rack angles.
A pair of Slides can support up to 160 lb. (73 kg) at the extended
position when load is distributed evenly along the 16-in. (406-mm)
Slide length. Requires Rack Angle Adapter Bracket to fit PROLINE.
Needs to be used with the Rack Angle Adapter Bracket (PBRAA,
PBRAA19 or PBRAA24).
Bulletin: P20
Catalog Number
A16SL2U
Quantity
2
Rack-Angle Mounted Drawer
Catalog Number
P19DR1US
P19DR2US
P19DR3US
H (mm)
43
88
132
Fits Rack
Width
19 in.
19 in.
19 in.
H (in.)
1.69
3.47
5.20
Rack
Units
1
2
3
Steel drawer for 19-in. rack-angle mounting. Mounts to the front
surface of the rack angles. Integral steel box contains the drawer
and protects surrounding internal equipment. Extends 13 in. (330
mm) on ball bearing slides. Front includes handle and key lock.
Finish is RAL 7035 textured light-gray polyester powder paint.
Mounting hardware is included.
Bulletin: P20
Writing Surface
Catalog Number
P19WS
Fits
Drawer
A 16-gauge steel cover mounts on top of the drawer to serve as a
writing surface and drawer cover. Finish is RAL 7035 textured lightgray polyester powder paint.
Bulletin: P20
Pentair Electrical
Spec-01073 C
PH 763.422.2211 • pentairprotect.com/hoffman
Stainless Steel
24