PS1016 16 10/100Mbps + 2 Gigabit combo port unmanaged PoE

PS1016
16
10/100Mbps + 2 Gigabit combo port
unmanaged PoE Switch
Overview
The 16-Port unmanaged PoE Switch, with 16 100Mbit RJ45 ports,2
Gigabit SFP and 2 Gigabit Uplink, model PS1016, reduces equipment
and installation costs by delivering data and power over existing
Ethernet cables to Power over Ethernet (PoE) enabled devices such as
Access Points and IP Cameras.
Boost office efficiency and reduce network congestion with a total
switching capacity of 7.2Gbps. LED indicators display device status for
easy power management and troubleshooting. An internal power
supply reduces clutter and delivers 15.4 Watts to each PoE port. A
convenient on/off button is located on the back of the switch. Non-PoE
devices can connect to the switch—auto-sensing PoE technology cuts
power to non-PoE connected devices. Use PoE Splitter with the
PS1016 to install non-PoE devices in remote locations.
Key features
• 16-Port 10/100Mbps + 2 Gigabit SFP port +2 Gigabit Uplink
unmanaged PoE Switch
• 16-Port support power to PoE Powered Device
• Complies with the IEEE 802.3f standard
• If 8 POE port work only, then complies with IEEE 802.3t
standard,25W each port
• Each Switching port support auto-negotiation-10/20, 100/200Mbps
(Fast Ethernet) , 1000/2000Mbps (Gigabit Ethernet) supported
• Support MAC address auto-learning and auto-aging
• Prevents packet loss with back pressure (Half-duplex) and IEEE
802.3x PAUSE frame flow control (Full-duplex)
• High performance Store and Forward architecture, broadcast storm
control, runt / CRC filtering eliminates erroneous packets to optimize
the network bandwidth
•Non-blocking switching architecture that forwards and filters
packets at full wire-speed for maximum throughput


7.2 Gbps Switching Capacity
On/Off power switch

Bulit-in 250W power adapter

Fanless design to make sure it works quietly without
disturbing your family
Hardware Specification
Fast Ethernet Ports
16 10/100Base-TX RJ-45 Auto-MDI / MDI-X ports
Gigabit ports
2 Gigabit SFP +2 Gigabit Uplink
Power over Ethernet ports
16-Port with PoE injector function
Switch Processing Scheme
Store-and-Forward
Switch fabric
7.2 Gbps
Data RAM Buffer
2.75Mb
MAC address
4K
Flow Control
Dimensions
Back pressure for half duplex, IEEE 802.3x Pause Frame for full
duplex
440 x 350 x 45 mm (1U height)
Weight
5.1kg
Power Requirement
100-240V AC, 50-60 Hz
Temperature
Operating: 0~50 ℃
Storage: -40~70 ℃
Humidity Operating
5% to 90%, Storage: 5% to 90% (Non-condensing)
Warranty
1 year
Power over Ethernet
PoE Standard
IEEE 802.3af Power over Ethernet / PSE
PoE Power Supply Type
End-Span
PoE Power Output
Per Port 48V DC, 350mA. Max. 15.4 watts
Power Pin Assignment
1/2(+), 3/6(-)
Power dissipation
110 watts
Standards Conformance
Certifications
FCC , CE, ROHS
IEEE 802.3 Ethernet
IEEE 802.3u Fast Ethernet
IEEE 802.3ab Gigabit Ethernet
Standards Compliance
IEEE 802.3z Gigabit Ethernet
IEEE 802.3x Full-duplex Flow control
IEEE 802.3af Power over Ethernet
IEEE 802.1Q VLAN
IEEE 802.1p QoS
Package contents
PS1016
Power code
1U rackmount