n
e
r
P
d
P
y
l
o
P
EN 1213
Non-woven geotextile to be used as compensation,
levelling, protection and filter layer.
DESCRIPTION
POLYDREN PP is a 100% polypropylene woven-non-woven
geotextile, needle punched and thermocalandered.
POLYDREN PP is produced in conformity to EN 13249;
EN 13254; EN 13250; EN 13255; EN 13251; EN13256;
EN 13252;EN 13257; EN 13253; EN 13265 standards.
APPLICATION FIELDS
Non-woven geotextile to be used as compensation,
levelling, protection and filter layer.
PACKAGING
Rolls of dimensions 2,0 x 50,0 m (Polydren PP 300)
Rolls of dimensions 2,0 x 50,0 m (Polydren PP 400)
Rolls of dimensions 2,0 x 50,0 m (Polydren PP 500)
Rolls of dimensions 2,0 x 25,0 m (Polydren PP 800)
STORAGE
Store horizontally, shelter from sun and bad weather in
a dry place.
SAFETY INSTRUCTIONS
POLYDREN PP is not considered dangerous according
to the current safety regulation for the classification
of goods and substances.
The safety datasheet is therefore not compulsory for
the purchase, transport and application.
TECHNICAL DATA
PRODUCT PROPERTIES
Product
100% Polypropylene non-woven geotextile, needle punched and
thermocalandered
Colour
Multicolour, with predominance of brown
CHARACTERISTICS STANDARDS
POLYDREN PP
300
POLYDREN PP
400
POLYDREN PP
500
POLYDREN PP
800
300 (-10%)
400 (-10%)
500 (-10%)
800 (-10%)
7 (-13%)
9,5 (-13%)
12 (-13%)
18 (-13%)
> 50
> 50
> 50
> 50
1000 (-10%)
1250 (-10%)
1500 (-10%)
2800 (-10%)
40 (-30%)
34 (-30%)
28 (-30%)
28 (-30%)
60 (±30%)
60 (±30%)
60 (±30%)
60 (±30%)
1,7 (±20%)
2,2 (±20%)
2,7 (±20%)
4,8 (±20%)
EN ISO 9864
Mass per unit area (g/m2)
EN ISO 10319
Average tensile strength* (kN/m)
EN ISO 10319
Average elongation at maximum load* (%)
EN ISO 12236
Static puncture resistance CBR (N)
EN ISO 11058
Waterflow normal to the plane (l/m2s)
EN ISO 12956
Characteristic opening size (µm)
EN ISO 9863-1
Thickness (mm)
Minimum durability expected 25 years in natural grounds with 4<pH<9 and ground temperatures <25 °C.
To be covered on the day of installation.
* Average value of machine direction and cross machine direction
We reserve the right to modify without prior notice the characteristics of our products, to continuously
improve them.
Data sheet Rev. 03/12.
n
e
r
d PP
y
l
Po
www.mapei.com
MAPEPLAN range is produced by:
Head Office - Viale Jenner, 4 - 20159 MILAN - Italy
Production Plant - Via dell’Artigianato, 34 -31047 Ponte di Piave (TV) - Italy
Tel. +39 04227547 - Fax +39 0422854118 - www.polyglass.com - info@polyglass.it