antbtg1 - TDJ Australia

1
6
2
7
4
3
ANTBTG1 User Manual
8
5
10
9
11
Specifications and features
[Bluetooth]
[Rechargeable Battery]
Name
ANTBTG1
Capacity
500mA/DC5V
Version
Version 4.1
Charging Time
2.5 hours for full charging
Standby Time
Up to 200 hours
Playing Time
Up to 6 hours
Profile
HFPV1.6 HSPV1.2 A2DPV1.2 AVRCPV1.4
Frequency Range
2.4~2.48GHZ
Operating distance Maximum up to 10 Metres
How to operate
NO.
Name
Function
Power ON/OFF
Operation
Long press more than 3 seconds for power on and off
1
Main Switch
Play and Pause Music
Short press to pause and play music
2
Line out
Stereo Signal Out
Connect to 3.5 Aux line in on the amp or 6.3 mono jack provided
3
6.3 Mono Converter
Connect to Guitar Amplifier
Combines L+R channels into single mono output
4
Micro USB Port
Charging ANTBTG1
Connect Micro USB cable (11) provided to charge ANTBTG1
5
Volume+
Volume up
Repeatedly press for volume up.
6
Volume -
Volume down
Repeatedly press for volume down. Long press for volume Min.
Long press for volume Max.
White LED Fast Blinking : Standby Bluetooth pairing
7
Signal LED
Indicate the status of ANTBTG1
White LED Slow Blinking : Paired Bluetooth
8
Line In
Connects a guitar or other instrument
Connect guitar and other instruments directly.
This input is mixed with the Bluetooth Audio
9
6.3 Female Mono Jack
Connects a guitar or other instrument
Connect to ANTBTG1 line in and guitar and other instruments.
This input is mixed with the Bluetooth Audio
Aux Cable Extension Base
Connect to ANTBTG1 Line Out
Extends either the AUX in or AUX outputs
Green LED On : Charging via connected power cable
10
Notes:
1. When the charging cable is connected, the ANTBTG1 automatically powers off. In this case restart and pair the Bluetooth again.
2. The Green LED automatically turns off after full charge.
3. Guitar and other instruments can constantly be connected to the Line In without Bluetooth pairing.
4. Incoming phone calls: When there is an incoming call the Bluetooth Audio stream is temporarily suspended. During the call, all the functions of the phone
are handed back to the handset. (This device is not designed to facilitate handsfree calls)
5. The ANTBTG1 is always in discovery mode, search on your phone to automatically connect via Bluetooth
6. The unit will turn off and unpair to save battery power if inactive for more than 10 minutes
Technical assistance:
If you need assistance setting up or using your Stadium product now or in the future, call Stadium Support Australia.
TEL: 03 – 8587 8898 / FAX: 03 – 8587 8866 Mon-Fri 9am – 5pm AEST. Please retain this user guide for future reference.