SWRP Wireless Repeater.CDR

Product Data Sheet
Wireless Mesh Repeater/Router - SWRP
Main Features
High Reliability: The Spinwave A3 Wireless Sensor
Network (WSN) utilizes mesh architecture and
features RF interference avoidance through selfadapting frequency agility.
Easy to Maintain: Sophisticated power
management results in long battery life of 3 to 8
years, depending on user-selectable transmission
intervals. Battery health and communication health
are continuously monitored.
Spinwave Systems’ Wireless Mesh Repeater/Router
significantly extends the resilience, range and node count
of wireless sensor networks.
The installation of multiple Mesh Repeaters/Routers
provides alternate wireless communication paths from
sensors to wireless receiver modules thus improving the
network’s ability to cope with obstacles. The wireless
network will automatically “heal” and reconfigure itself if a
communication path is obstructed.
Wireless Mesh Repeaters/Routers are line powered and,
due to flexible installation options, can be mounted hidden
in suspended ceilings or, alternatively, in the occupied
space of buildings mounted on the ceiling or wall.
Spinwave’s wireless mesh network supports up to fifty (50)
devices (Sum of sensors and Mesh Repeaters/Routers) per
receiver.
Flexible and Scalable: System can grow from a few
to hundreds of monitoring points. Sensors can be
easily added, moved, or removed.
Multiple Interface Options: The A3 WSN
interfaces to virtually any automation system (BMS,
PLC), monitoring application or network management
tool.
Install Quickly and Economically: Wireless
system can be installed with no disruption to
operations.
Applications
Mesh repeater/router radios should be used to
communicate between floors or between buildings in
campus installations.
Repeater/routers are used to connect “sensor islands”
over longer distances to the wireless mesh network.
Repeater/
Router
Transceiver
Receiver
ay
tew
Ga
Transceiver
Order Information
SWRP: Wireless Mesh Repeater/Router
SWPSUP-2: 120VAC/5VDC Power Supply for Wireless
Mesh Repeater/Router, plugs into standard 120VAC outlet.
Repeater/
Router
Repeater/
Router
Transceiver
Sensor
Sensor
Sensor
Interface options:
- Direct I/O
- BACnet IP
- BACnet MS/TP
- LON
- Modbus TCP
- Modbus RTU
- SNMP
Specifications
Enclosure
Mesh Repeater: ABS plastic, UL94-5VA, color:
bone
Installation
Surface mount
Operating Conditions
-40°F to 176°F (-40°C to 80°C)
5% to 95% R.H. non-condensing
Storage Conditions
-40°F to 176°F (-40°C to 80°C)
5% to 95% R.H. non-condensing
120 mm
(4.72”)
89 mm
(3.5”)
Radio Characteristics
2.4GHz, IEEE 802.15.4
Receiver Sensitivity
-95dBm
Receiver Adjacent Channel Rejection
+/-5MHz, 46/39 dB
Receiver Alternate Channel Rejection
+/-10MHz, 58/55 dB
Open field Range
Receiver/Repeater: up to 3500 ft. (1 km)
Repeater/Repeater: up to 3500 ft. (1 km)
Repeater/0dBm Sensor: up to 1000 ft. (300 m)
64 mm
(2.52”)
ø5 mm
(0.19”)
89 mm
(3.5”)
25 mm
(1.0”)
Power
5 VDC, using Spinwave’s 120VAC
Repeater/Router power supply (SWPSUP-2)
0307F
Available from:
Spinwave Systems, Inc.
Adaptive Wireless
Solutions
235 Littleton
Road Ltd
91 High St., Prestwood
Westford, MA 01886
Gt. Missenden
978-392-9000
HP16 9ER
Tel: +44 (0) 1494 865992
www.spinwavesystems.com
UK
e-mail:
sales@adaptive-wireless.co.uk
© 2011 Spinwave Systems, Inc. All rights reserved.
Spinwave is a trademark of Spinwave Systems, Inc.
All other product and company names are trademarks or registered trademarks
of their respective owners.
Specifications are subject to change without notice.