ManualsLib - Makes it easy to find manuals online!

80-M300(11)-97-0001-01
2011-10-10
M-300
User Manual
www.microlab.cn
Microlab Electronics Co.,Ltd
Made in China
Multimedia Speaker System
All other brand and product names are trademarks of their respective holders. Actual contents may differ slightly from those shown in print. All
specifications and designs are subjected to changes without any prior notice.
Downloaded from www.Manualslib.com manuals search engine
Prior to first use, please read the manual carefully
80-M300(11)-97-0001-01
2011-10-10
Important Safety Instructions
English
Caution:
To reduce the risk of electric shock, do not dismantle the product and do not expose the apparatus to rain or moisture. No
user-serviceable parts inside. Refer servicing to qualified personnel only.
2
Explanation of Graphical Symbols:
The lightning flash within an equilateral triangle is intended to alert you to the presence of uninsulated dangerous voltage
within the product's enclosure that may be of sufficient magnitude to constitute an electric shock to a person or persons.
The exclamation point within an equilateral triangle is intended to alert you to the presence of important operating and
maintenance (servicing) instructions in the literature accompanying the product.
WARNINGS:
1.
2.
3.
4.
5.
6.
7.
1
EN
2
8.
9.
10.
11.
12.
13.
14.
15.
Downloaded from www.Manualslib.com manuals search engine
Read Instructions - All the safety and operating instructions must be read before the product is operated.
Retain Instructions - The safety and operating instructions should be kept with the product for future
reference.
Heed warnings - All warnings on the product and in the operating instructions should be adhered to.
Follow instructions - All operating and users instructions should be followed.
Installation - Install in accordance with the manufacturer's instructions.
Power sources - This product should be operated only from the type of power source indicated by the
marking adjacent to the power cord entry. If you are not sure of the type of power supply to your home,
consult your product dealer or local power company.
Grounding or polarization - the product is not required to be grounded. Ensure the plug is fully
inserted into the wall outlet or extension cord receptacle to prevent blade or pin exposure. Some
versions of the product are equipped with a power cord fitted with a polarized alternating line plug (a
plug having one blade wide than the other). This plug will fit onto the power outlet only one way. This
is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the
plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the
safety purpose of the polarized plug. When using an extension power-supply cord or a power-supply cord
other than that supplied with the appliance, it should be fitted with the appropriate molded plugs and carry
safety approval appropriate to the country of use.
Power cord protection - Power-supply cords should be routed so that they are not likely to be walked on,
kinked or pinched by items placed on or against them, paying particular attention to cords from plugs,
receptacles and the point where they exit from the appliance.
Overloading - Do not overload wall outlets, extension cords or multiple sockets, as this can result in a risk of
fire or electric shock.
Ventilation - The product must be properly ventilated. Do not place the product on a bed, sofa, or other similar
surface. Do not cover the product with any items such as tablecloths, newspapers, etc.
Heat - The product should be situated away from heat sources such as radiators, heat registers, stoves, or
other products including amplifiers that produce heat. No naked flame sources, such as lighted candles,
should be placed on the apparatus.
Water and moisture - To reduce the risk of fire or electric shock, do not expose the product to train, dripping,
splashing or excessive moisture such as in a sauna or bathroom. Do not use this product near water, for
example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool, or
etc.
Object and Liquid Entry - Never push objects of any kind into this product through openings, as they may
touch dangerous voltage points or short-circuit parts that could result in a fire or electric shock. Never spill
liquid of any kind on the product. Do not place any object containing liquid on top of the product.
Cleaning - Unplug the product from the wall outlet before cleaning. The cabinet of the subwoofer may be
cleaned by dusting with a dry cloth. If you wish to use an aerosol cleaning spray, do not spray directly on the
cabinet; spray onto the cloth. Be careful not to damage the drive units.
Attachments - Do not use attachments not recommended by the product manufacturers, as they may cause
hazards.
80-M300(11)-97-0001-01
2011-10-10
Function Instruction
Illustrations
16. Accessories - Do not place this product on an unstable cart, stand, tripod, bracket or table. The
product may fall, causing serious injury to a child or adult, and serious damage to the product. Use
only with a cart, stand, tripod, bracket or table recommended by the manufacturer or sold with the
product. Any mounting of the product should follow the manufacturers’ instructions and should use a
mounting accessory recommended by the manufacturer.
17. Moving the product - A product and cart combination should be moved with care. Quick stops,
excessive force and uneven surfaces may cause the product and cart combination to overturn.
18. Un-use periods - The power cord of the device should be unplugged from the outlet during lightning
storms or when the apparatus is left unused for a long period of time.
19. Servicing - Do not attempt to service this product yourself, as opening or removing covers may expose
you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
20. Please remove the power plug form the main power source or wall power source when not in use.
When plugged in to a power source, the system is in standby mode, so the power is not entirely cut off.
21. Replacement parts - When replacement parts are required, ensure the service technician has used
replacement parts specified by the manufacturer or have the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric shock or other hazards.
22. Mains fuses - For continued protection against fire hazard, use fuses only of the correct type and
rating. The correct fuse specification for each voltage range is marked on the product.
23. Do not turn up the volume while listening to a section with very low level inputs or no audio signals. If
you do, the speaker may be damaged when a peak level section is suddenly played.
24. The only means of completely disconnecting the product from the power supply is by removing the
power cord from the wall outlet or the product. The wall outlet or the power cord entry to the product
must remain freely accessible at all times while the product is in use.
25. Try to install the product near a wall socket or extension cord and shall be easily accessible.
26. The highest environmental temperature suitable for this product is 40°C.
EN
3
Front View
Subwoofer
Left satellite
Right satellite
VOLUME
BASS
Rear Views
Subwoofer
Right satellite
Introduction
Media
player
Designed beautifully, this 2.1 speaker system lets you listen to most digital music in perfect harmony.
Aesthetic in design, it fits into most room types such as bedroom, kitchen or even your studies.
Featuring delicate woofer created for stronger bass and compact satellites for clear highs. Ideal for
multimedia use, connects directly to any 3.5mm stereo interface. Subwoofer comes with bass reflex
tunnel for deeper low frequency response. Satellite speakers with metal diamond texture.
Easy to access master and bass volume controls.
Left satellite
EN
4
MULTIMEDIA SPEAKER
M-300
TV
AUDIO INPUT
CD\ VCD \ DVD
Blu-Ray player
R
L
AUDIO OUTPUT
ON
AC IN
OFF
MADE IN CHINA
Mp3 \ Mp4
Media player
Features
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Quality 2.1 speaker system with built-in amplifier
Satellite speakers with metal diamond texture
Front panel volume controls
Full audio spectrum performances, ideal for your favourite entertainment from Mp3, Mp4,
CD/DVD movies and digital playbacks
Specially designed woofer for bass and resolution
Comes with 3.5mm stereo connection that connects to most media players and computers
Package contents
M-300 subwoofer
M-300 satellites
3.5mm - 3.5mm audio cable
User manual
1 pc
2 pcs
1 pc
1 pc
Downloaded from www.Manualslib.com manuals search engine
PC or Notebook
To AC power source
3.5 mm stereo input from digital music source
Operation
Connection:
1. Connect the left and right satellites to the subwoofer rear panel to its respective RCA jacks.
2. For analog source, connect the playback source (Media player, VCD, DVD, or CD player) to the
3.5mm stereo jack (AUDIO INPUT). The 3.5mm - 3.5mm stereo cable is provided with the
package.
3. Please place the satellites on extreme sides in front of the listening position.
4. Connect the AC power cord to the power supply source.
80-M300(11)-97-0001-01
2011-10-10
Operation
Operation:
1. Turn on the AC power source and the speaker power from the rear panel power switch.
2. Activate the media player playback.
3. Adjust the volume on the media player, and speaker master volume to your preferred listening
level.
Technical Information
AMPLIFIER
Total Power:
Power distribution:
Harmonic distortion:
Frequency response:
Signal/Noise ratio:
Separation:
Speakers
Tweeter driver type:
Tweeter rated power:
Bass driver type:
Bass rated power:
Interfaces
Output:
Input:
40 Watt RMS
10 Watt x 2 + 20 Watt
< 0.3 % 1 W 1 kHz
30 Hz - 20 kHz
> 75 dB
> 45 dB
2.5" x 2
10 Watt 6 ohm
5"
30 Watt 8 ohm
2RCA
3.5mm stereo jack
Intentionally left blank
EN
5
FrequentlyAsked Questions (FAQ)
FrequentlyAsked Questions
EN
6
Answers
Check the media source own volume level, adjust to
about mid volume range and listen.
Low volume output
Adjust speaker’s own volume level to mid range and
listen
Check if the audio source is properly connected or
media player’s playback has started
No Sound
Ensure volume is correctly set
Correct digital music format is used, e.g., Mp3
Static sound heard
Ensure playback track is of proper and higher bit rate,
too much compression will increase noise level
What are the products
supported?
Any playback devices such as PC, Media
Players with 3.5mm stereo plug.
Sound is distorted
Check if the volume is at lower level and the Mp3
format is recorded at above 196 bitrate
Where to place this speaker
It is magnetically shielded so can be placed
near LCD TV Monitor without any distortion
If the problem still exists, please contact the distributor or ask for professional service
- The end -
© 2011 Microlab Electronics Co., Ltd All rights reserved.
Downloaded from www.Manualslib.com manuals search engine