PIVOTING WALL/CEILING BRACKET
SVS | 260 Victoria Rd. Youngstown, OH | www.svsound.com
ISSUED: MARCH 2016
THANK YOU!
Thank you for choosing the SVS SoundPath Pivoting Wall/Ceiling Bracket for your speaker
mounting needs. This bracket is designed to offer directional flexibility in nearly any room
with a strong, safe and reliable mounting solution for both walls and ceilings. The SVS
SoundPath bracket is easy to install and works great in any surround sound or height
effects application because the installed speaker can be pointed in nearly any direction.
ball shaft (wall mount) x2
B
We engineered our SoundPath Wall/Ceiling Bracket with the same precision as all of our
speakers and subwoofers, so you know you’re getting the best mounting solution available.
If you have any questions about installation or placement, don’t hesitate to contact our
Sound Experts Customer Care team.
NEED HELP?
Let us know! We’re always standing by to help with installation, system configuration, or
any other set-up questions. Just call, email or chat online with our Sound Experts Customer
Care team:
wall / ceiling plate x2
A
ball shaft (ceiling mount) x2
C
M6x14 x2
M-A
threaded stud x2
M-B
Package M:
(877) 626-5623 | custservice@svsound.com | www.svsound.com
 WARNING
• Read and understand all the instructions and warnings before installation.
4mm Allen key x1
M-C
3mm Allen key x1
M-D
extra jam nut x2
M-E
• The mounting bracket was designed to be installed and utilized ONLY as specified in
this manual and improper installation may cause damage or injury.
• Before starting, make sure the mounting surface will safely support the combined
weight of the speaker and all attached bracket hardware and components.
Package W:
• If mounting to wood wall studs, please make sure that mounting screws are anchored
into the center of the studs.
• Tighten bracket screws firmly, but do not over-tighten as this can reduce holding
power and cause damage to the wall or speaker.
ST5.5x50 x4
W-A
wall anchor x4
W-B
1. Speaker Options
Prime Satellite / Keyhole Bracket
Threaded Insert
1 Remove Prime Satellite keyhole bracket from the speaker with
the included 3mm Allen key (M-D)
2 Assemble M6 screw (M-A) to threaded stud (M-B) after inserting
it through the Prime Satellite keyhole bracket
3 Reassemble keyhole bracket with M6 screw (M-A) and threaded
stud (M-B) to Prime Satellite speaker.
4 Attach desired ball shaft mount to threaded stud
If your speaker includes an integrated 1/4-20 threaded insert,
either ball shaft can be mounted directly to the speaker.
1 Thread jam nut (M-E) onto desired ball shaft.
2 Screw ball shaft assembly into the 1/4-20 threaded insert of your
speaker.
3 Tighten the jam nut (M-E) against your speaker, locking the ball
shaft assembly in place.
3
mm
1
ceiling
wall
M-E
3
4
2
M-A
M-B
Keyhole
Bracket
 WARNING
• Make sure that mounting screws are anchored into the center of the studs.
• Installers are responsible for providing hardware for other mounting solutions.
• Verify that the supporting surface will safely support the combined weight of the
equipment and all attached hardware and components.
 WARNING
Verify that the supporting surface will safely support the combined weight of the
equipment and all attached hardware and components.
4
mm
7
8