69-RTC10 - NTE Electronics Inc.

69−RTC10
RF Remote Touch Screen Control System
for RGB + W and RGB + WW LED Strips
Description:
The 69−RTC10 is a high−performance RGBW LED touch remote controller that utilizes the most advanced PWM control technology. This allows the device to control all types of RGBW LED products
containing five lines and four circuits (common anode) as well as 15 automatic changing modes and
640 thousand colors to choose from. The 69−RTC10 also has a memory function that remembers the
previous setting when the unit is turned off and then powered back on.
With 2.4G high frequency wireless remote control technology, the 69−RTC10 features low power
consumption, long distance transmission, high speed communication, strong anti−interference
ability, high speed communications, etc.
The remote looks fashionable and elegant, with simple and practical functions for color changing and
brightness dimming and the capacitive touch screen design makes the remote easy to use. The modular
design and easy−to−use screw terminals enable the controller to easily match with all kinds of LED light
products.
Technical Specifications:
Remote
Controller
Size
Power
Material
Fabrication Process
Size
Working Voltage
Control Way
Maximum Load per Channel
Output Connection
Telecontrol Distance
Programs
110 x 52 x 20mm
Requires 2 AAA Batteries (Not Included)
ABS Plastic
Multicolor Printing and UV Varnish
85 x 45 x 23mm
12V to 24V DC
R G B W Four Channels
6A
Common Anode
98.4 Feet (30 Meters)
15 Types
Key Function Descriptions:
ON
OFF
Indicating Light
Speed +
Brightness +
Brightness −
Speed −
Color Ring
B
S
M
Mode +
Mode −
Program List:
Number
1
Mode
Solid Color (Other than White)
Brightness State
Adjustable
Speed State
Unadjustable
2
3
Solid White Color
Solid Color and White Together
Adjustable
Adjustable
Unadjustable
Unadjustable
4
5
Solid Color Gradual Change
Red / Green / Blue / White Gradual
Change
Red / Green / Blue / White Hopping
Red / Green / Blue / Yellow−Green /
Violet / Teal / White Hopping
Red / White Hopping
Blue / White Hopping
Green / White Hopping
Red Blinking
Blue Blinking
Green Blinking
White Blinking
All Colors Blinking, Gradual Change,
Hopping
Adjustable
Adjustable
Adjustable
Adjustable
Adjustable
Adjustable
Adjustable
Adjustable
Adjustable
Adjustable
Adjustable
Adjustable
Adjustable
Adjustable
Adjustable
Adjustable
Adjustable
Adjustable
Adjustable
Adjustable
Adjustable
Adjustable
Adjustable
Unadjustable
6
7
8
9
10
11
12
13
14
15
Remark
Choose Any Color by Touching
the Color Ring
White Only
Color Ring Free to Choose
Brightness Adjusts Only for
Color Light
White (Off)
All the Modes Cycle
Programming:
Code Matching:
For a new kit (1 remote & 1 controller), the remote can only work when it is programmed to match the
controller. Please follow the instructions below:
1. Correctly connect the power supply, LED controller and LED load.
2. Switch OFF the power, then switch ON again. Press Speed + once (within 3 seconds) the moment
you see the light is on.
3. The LED light will blink twice slowly when the remote and controller are matched.
Programming (Cont’d):
Code Clearing:
The code can be cleared as needed. The kit (1 remote & 1 controller) will return to its original state
after code clearing and can only be used once the Code matching steps are repeated. Please follow
the instructions below to clear a programmed code:
1. Correctly connect the power supply, LED controller and LED load.
2. Switch OFF the power, then switch ON again. Press and hold Speed + (within 3 seconds) the moment
you see the light is on.
3. The LED light will blink fast 9 times when the code is cleared.
Notes:
1. The regular product for sale is a kit (1 remote & 1 controller).
The user can re−programmed freely as needed. One remote can control countless controllers
however, one controller can only be controlled by a maximum of four remotes.
2. Please check the battery installation and controller (totally discharge the power) when you program
after switching OFF and switching ON.
Connection:
W
AC
−
DC 12V/24V
Power 1
G R
+
W
B
+
AC to DC
B
G
Power 2
R
+
Notes:
1. Be sure to check that the input voltage of the power supply is compatible with the controller. Also,
please verify that the anode and cathode connections are correct, otherwise the controller will not
function correctly.
2. DO NOT connect the wires with the power on. Turn the power switch on only after verifying that
the connections are correct and that there is no short circuit possibility.
3. To improve the sensitivity of the remote, be careful not to place your finger(s) on the touch ring while
installing the batteries. Do not use the remote for at least 3 seconds after the batteries have been
installed. If the touch ring is slow to respond, please try reinstalling the batteries.
4. Do not use the controller in areas containing excessive metal or strong electromagnetic waves as
this will seriously effect the range between the remote and the controller.