ADVANCED
TESTING TECHNOLOGIES
Key QualiBenefits
Qualitest is proud to retain a constantly growing roster of global customers who continue to benefit from our product offerings.
Qualitest offers guarantees that make us stand out in the competitive testing equipment industry in offering the best price/
quality ratio products, efficient support, and much more. These are a few key benefits that we continue to offer to our
customers worldwide:
Plastics Testing Technologies
Universal Testing Machines
Low Price Guarantee
High Level of Standards
Qualitest is confident to offer competitive
products at the best possible prices. That’s
why we offer 110% Low Price Guarantee to
meet and beat any price for the same level
product. We ensure to offer the best value for
your investment.
Qualitest products are built to meet and
exceed latest North American and global
standard requirements
Efficient Logistics
#1 Source for Testing
Technologies
Short delivery periods for standard products
from our many convenient worldwide distribution centers. Our large volume of shipments
helps us to offer the most competitive
shipping rates worldwide.
Universal Force Test Systems
Durometer - Shore Hardness Testers
Charpy / Izod Pendulum Impact Testers
Plastics Pipe / PVC Testing Instruments
Drop Impact Testers
Specific Gravity Tester – Densimeter
Brittleness & Freezing Testers
Qualitest is recognized as a one stop source
for complete quality control lab solutions, as
we provide streamlined support for all of your
testing requirements without the need of
relying on too many sources.
Sample Specimen Preparation Equipment
Vendor of Choice for many
Fortune 500 companies
Centralized Service &
Support Coordination
Film Permeability Tester
North American and global Fortune 500
corporations continue to benefit from Qualitest range of products, as we ensure the
highest security and assurance for their
investment.
Managed through our central service dept.
we offer efficient customer service support,
direct or via our worldwide QualiService
authorized network.
Specimen Dies & Clicker Presses
MFI, Capillary Rheometer, HDT/VICAT & LME
Friction, Adhesive, Tearing Testers
Film Thickness Gauges
Color Testing Instruments
Block Oven / Aging Oven
Low Temperature Tester – Combo
Creep & Relaxation Tester
Toll-Free: 1.877.884.TEST (8378) | Fax: 954.697.8211
info@qualitest-inc.com | www.WorldofTest.com
USA Canada UAE Mexico India Hong Kong
Plastics Testing Technologies
More Plastics Testing Instruments
Differential Scanning Calorimeter
About Qualitest
www.WorldofTest.com/differential-scanning-calorimeter
Qualitest is a global contender and one of the top-ranking manufacturers and suppliers of testing technologies worldwide. With our extensive
portfolio of state-of-the-art and competitively priced testing machines, systems and software, we supply standard or customized solutions for
many test, measurement and quality control tasks required in the world of modern materials testing.
The key products from Qualitest range include hardness testers, universal testing machines, metallography, materials testing equipment,
The Differential Scanning Calorimeter - QT-DSC6 Series is a compact and low-cost thermal
analysis instrument. Differential Scanning Calorimeter - QT-DSC6 Series have a vast number
of industrial applications, particularly in the quality control of engineering thermoplastics.
spectroscopy, microscopy, portable testers, and instruments for testing metals, plastics, rubber, textiles, paper, paint, cement, concrete and
Limiting Oxygen Index Chamber
packaging materials, as well as technologies for NDT/Ultrasonic, surveying, automotive, aerospace, mining, oil/gas/pipe industries, gold & Jewel-
www.WorldofTest.com/limiting-oxygen-index-chamber
lery applications and much more.
ASTM D2863, ISO 4589, BS 2782 part 141
The Limiting Oxygen Index (LOI) fire test is perhaps the most economical and precise quality control test for combustible materials. Its ease of use together with high levels of precision has made this technique a primary characterization
and quality control tool for the plastic materials and electric cable industries. It is often used in materials specifications
and material/product data sheets and included in some US Mil Specs. The test assesses the minimum percentage of
oxygen in the test atmosphere that is required to marginally support combustion.
Table of Contents
3
Universal Testing Machines
5
Universal Force Test Systems
6
Durometer - Shore Hardness Testers
8
Charpy / Izod Pendulum Impact Testers
9
Plastics Pipe / PVC Testing Instruments
10
Drop Impact Testers
11
Specific Gravity Tester – Densimeter
12
Brittleness & Freezing Testers
13
Sample Specimen Preparation Equipment
14
Specimen Dies & Clicker Presses
16
MFI, Capillary Rheometer, HDT/VICAT & LME
17
Friction, Adhesive, Tearing Testers
18
Film Permeability Tester
19
Film Thickness Gauges
21
More Film Testing Instruments
22
Color Testing Instruments
25
Block Oven / Aging Oven
26
Low Temperature Tester – Combo
27
Creep & Relaxation Tester
28
More Plastics Testing Instruments
Leak Tester - QT-LT-V (Negative Pressure Method)
www.WorldofTest.com/leak-tester-qt-lt-v
ASTM D 3078
Leakage testing of pressurized packages is very important part of product manufacturing and preservation
of product to maintaining its quality till consumption of product for industries which deal with food, beverages, pharmaceuticals, personal care etc.
Leakage Tester – QT-LT-V is used to test the hermetic sealing quality and performance of packaging bags,
bottles, cans, etc.
Leakage and Seal Strength Tester - QT-LT-P
www.WorldofTest.com/leakage-and-seal-strength-tester-qt-lt-p
ASTM F1140, ASTM F2054, ISO 11607-1, ISO 11607-2
Qualitest Leakage Tester QT-LT-P tests the hermetic seal quality, strength, joint/disengaging force, performance, compression and burst resistance of packaging bags, bottles, flexible packages, cans covers etc.,
used in food industries, beverage, pharmaceuticals, and personal care and so on. These test methods
provide rapid means of evaluating tendencies for package failure when the package is exposed to a
pressure differential.
1
30
ADVANCED
TESTING
ADVANCED
TECHNOLOGIES
TESTING
TECHNOLOGIES
More Plastics Testing Instruments
Salt Spray Tester
www.WorldofTest.com/salt-spray-tester
ASTM-B117, JIS-D0201, JIS-H8502, JIS-H8610, JIS-Z2371, GB/T 10125
The Salt Spray Tester – Salt Spray Cabinet – Chamber – Fog Apparatus is used to create and maintain the salt
spray (fog) test environment, and test the anti-corrosion quality of all the materials surfaces after the rust-proof
of painting, coating, electroplating, anodizing and rust-proof of greasing. Our salt spray testers available in two
capacities meet ASTM-B117, JIS-D0201, JIS-H8502, JIS-H8610, JIS-Z2371 and other International Standards
test methods. Power supplied can be configured upon request.
Plastics Testing Technologies
Plastics
General Applications
Plastics are made by using microscopic building blocks
Plastics are often used to replace other common materials such as metals and
called hydrocarbons, typically derived from petroleum
wood because of their low cost and durable characteristics. Plastics offer
or natural gas. These monomers (small molecules) are
innumerous advantages in production as they are easily softened or melted,
bonded into chains called polymers or plastic resins.
and can be molded into any shape.
Different combinations of monomers yield resins with
Plastics in general can be divided into two categories: thermoplastic and
special properties and characteristics.
thermoset processing groups.
Rotary Abrasion Tester
Thermoplastic materials are made of polymers or long-chain macromolecules.
www.WorldofTest.com/rotary-abrasion-tester
Heat can transform this material, giving it the flexibility to be formed into tools
or key components of other products. This characteristic also allows plastics to
The Rotary Platform Abrasion Testing method was introduced in the 1930's and has been a popular method for
evaluating abrasion and wear resistance. Our Rotary Abrasion Tester is a cost-effective, easy to use and high
quality instrument,compared to Taber®* Abraser used to cover a wide spectrum of materials (including plastics,
coatings, laminates, leather, paper, ceramics, carpeting, safety glazing, etc.) and is built in conformance to
ASTM C501 / C1353 / D4157 / D1044 / D3389 / D3451 / D3730 / D3884 / D4060 / D4685 / D4712 / D5144 /
D5146 / D5324/ D6037 / D7255/ F362/ F510/ F1478/ G195/ F1978, TAPPI T476, as well as many other
International DIN, MIL, EN, BN, ISO, JIS, SAE, BS, and ANSI standards.
be reused or recycled. The other components that make up this material are
additives that change properties such as color, stiffness, weatherability, and
wear resistance. Thermoplastic materials are necessary for essential manufacturing materials such as sheets, round bars, round bars with a steel core,
pipes, and various other sections.
Thermoset plastics are made of polymers that are permanently set through
exposure to heat and catalysts during the manufacturing process. As heat can
Digital Torque Tester
no longer change their shape, these materials are thereby used at higher
www.WorldofTest.com/digital-torque-tester-qt-dtt-10
temperatures and pressures than thermoplastics can withstand.
ASTM D2063, ASTM D3198, ASTM D3474
QT-DTT-10 is specially designed instrument to effectively and efficiently measure the torque retention properties
of container or continuous thread closure systems of various packaging containers with varied designs. It is best
suitable for packaging development and engineering evaluation of various designs of packaging containers and
its quality control.
The ideal combination of processing flexibility and performance enables
plastics to be used in an extensive range of applications ranging from low-cost
disposable items to expensive specialty parts. Plastics are key materials in the
production of automotive parts, electrical appliances, aircraft and aerospace
components, sporting goods, packaging, toys, food packaging, and much
Ink Rub Tester
more. There is no other material that can match the durability of plastic due to
www.WorldofTest.com/ink-rub-tester
its flexibility, fast molding qualities, color absorption, resistance to corrosion,
Rub resistance describes the ability of printed material to withstand marking, scuffing or smudge during handling
in conversion, packaging, transportation, distribution and use. QT-IRT simulates a similar environment to test the
rub resistance on printed materials.
It is used to analyze the life of label by creating actual environment of application to evaluate abrasion resistance
of surface coating layer of printed material.
It simulates the actual working environment of product and helps to identify the quality and printing method to
be used for printing of label based on application of product and its working environment.
low weight, electrical and thermal insulation, and general toughness and
longevity.
The extensive use of plastics requires testing at all stages of development and
manufacturing to ensure that products are able to perform well in their intended
use. The tests are conducted by companies to guarantee quality control, using
internationally standardized methods in the production of all plastic products.
As the characteristics of plastics are influenced by external temperature chang-
Synchronous Thermal Analyzer - QT-STA100
es, testing should also be conducted at high and low temperatures. Extereme
www.WorldofTest.com/synchronous-thermal-analyzer-qt-sta100
temperatures can be achieved in environmental chambers, which provide the
Synchronous Thermal Analyzer QT-STA100 combines TGA (Thermo gravimetric Analysis) with DSC (Differential Scanning Calorimeter), in which we can get the information of TG and DSC in synchrony using the
same sample during the same operation.
conditions of real-world applications. For tensile testing, laser and video extensometers are also used for high temperature strain measurements as well as
for plastics materials that are sensitive to contact stresses or contamination
29
1
2
ADVANCED
TESTING
ADVANCED
TECHNOLOGIES
TESTING
TECHNOLOGIES
More Plastics Testing Instruments
Universal Testing Machines
Hot Set Tester
Universal Testing Machine - QM-Series
www.WorldofTest.com/hot-set-tester
www.WorldofTest.com/universal-testing-machine-qm-series
IEC 811-2-1, IEC 811
Hot Set Tester - EB 16II is made for hot set testing of cable material according to IEC 811-2-1. To avoid too high
temperature loss when inserting and cutting the samples, the samples are introduced through a small opening in the
top of the oven. To get a suitable working height and not shake the samples during insertion, the oven is fixed and the
sample holder moves up and down by a servo motor driven screw system. The oven has a controlled air exchange
rate and low air speed which can be controlled by a flow meter, meeting the requirements for ageing ovens in IEC
811.
Measurements are made through the window with a laser pointer mounted on a measuring scale placed on the door.
The window can be taken apart for cleaning. With a push on a button on the scale the measured values are entered
in an Excel template, when measuring the elongation. The set is measured outside the oven with a digital caliper also
connected to the computer.
The QM-Series Universal Testing Machine is loaded with technical features, ergonomic design and is
produced with the highest quality as a benchmark. This instrument is suitable to be used in: Production
lines, where the operator has to be fast and efficient, and accurately control the test, Testing lab environments, where using the advanced software, the users can analyze the test data, have full control on
processing, filing, and test management.
A Universal Testing Machine (UTM) is used to test both the tensile and compressive strength of materials.
Universal Testing Machines are named as such because they can perform many different varieties of tests
on an equally diverse range of materials, components, and structures. Most UTM models are modular, and
can be adapted to fit the customer’s needs.
Universal Testing Machines can accommodate many kinds of materials, ranging from hard samples, such
as metals and concrete, to flexible samples, such as rubber and textiles. This diversity makes the Universal
Testing Machine equally applicable to virtually any manufacturing industry.
The UTM is a versatile and valuable piece of testing equipment that can evaluate materials properties such
as tensile strength, elasticity, compression, yield strength, elastic and plastic deformation, bend compression, and strain hardening. Different models of Universal Testing Machines have different load capacities,
some as low as 2 kN and others as high as 3,000 kN.
QM -Series Universal Testing Machine Range
Model / Specs
QM-2 QM-5
for QM-Series
Capacity (kN)
2
5
Total Cross- head 400 or 800
Movement (mm)
Elastometer - EF-02
www.WorldofTest.com/elastometer
QM-10
QM-20
QM-50
QM-100
QM-200
QM-300
QM-500
10
650 or
1,100
20
800 or
1,200
50
1,000 or
1,100
100
1,000
200
1100
300
1100
500
1200
ISO 3384, ISO 7743
Discontinuous Stress Relaxation Tester- EF-02 - Elastometer is used for Compression Tests on profiles & for Discontinuous stress relaxation tests.
The test jigs for stress relaxation are simple in design but made with very high accuracy regarding surface finish and
parallelism of the platens. The discontinuous stress relaxation system has an economical advantage when many
materials are to be tested during very long times.
Carbon Black Content Analyzer
www.WorldofTest.com/carbon-black-content-analyzer
Q-SOFT Control Software
QSOFT is the software used to control the Universal Testing Machine. The QM-Series unit and the software are designed to accommodate a
wide variety of testing needs. The software has a variety of preset programmed test cycles for compression, tensile, and cyclical testing to meet
a range of testing standards
This software has the following capabilities:
The Carbon Black Content Analyzer - ES-14 - Tube Oven can be used for the following and
similar test methods:
• ISO 247 Rubber - Determination of Ash
• ISO 1408 Rubber - Determination of carbon black content
• ASTM D297 Rubber - Determination of carbon black and ash content
• ASTM D1603 Plastics - Test method for carbon black in olefin plastics
Temperature controller, over temperature thermostat, drying tube, flow meters, wash bottles and 5 quartz glass boats are included.
• Selection of communication language
• Setting of test methods
• Test execution
• Analysis of the results
• Printing of the certificates
• Graphic post-analysis of the tests
• Statistical analysis of the tests
Environmental Stress-Cracking Tester
www.WorldofTest.com/environmental-stress-cracking-tester
ASTM D1693-01
The environmental stress cracking chamber is used to determine of the susceptibility of ethylene plastics,
as defined in terminology D883, to environmental stress-cracking when subjected to the conditions specified in ASTM D1693-01,under certain conditions of stress and in the presence of environments such as
soaps, wetting agents, oils, or detergents, ethylene plastics may exhibit mechanical failure by cracking.
1
3
28
ADVANCED
TESTING
ADVANCED
TECHNOLOGIES
TESTING
TECHNOLOGIES
Creep & Relaxation Tester
Universal Testing Machines
www.WorldofTest.com/universal-testing-machine
Full Notch Creep Tester - EB-15
Universal Testing Machines - Q-Series
www.WorldofTest.com/full-notch-creep-tester
The Full Notch Creep Tester - EB-15-II-10 for Testing of Plastics Materials is available in different
configurations the creep tester utilizes load cells and servo motors to apply and hold the load rather than the
conventional method of applying dead weights. Apart from eliminating the handling problems associated with
weights this design offers the possibility of running features such as temperature and load ramps controlled by
the computer.
Full Notch Creep Tester - QT-FNCT-6 Series
www.WorldofTest.com/full-notch-creep-tester
ISO 16770 and ISO3501
Full Notch Creep Tester (FNCT) - QT-FNCT-6 Series - For Testing of Plastics Materials is used to determine the
stress cracking resistance of polyethylene materials in any environment. A test specimen in the form of a
square-section bar with coplanar notches in each face at the center is subjected to a static tensile load in a
temperature-controlled environment (ie. air, water, surfactant solution). The geometry of the specimen is such
that plane strain conditions are obtained and brittle failure occurs under appropriate tensile load and temperature conditions. The time for this brittle failure to occur after loading is recorded.
Film Creep Tester EB-24
www.WorldofTest.com/film-creep-tester
Film Creep Tester is based on our Ageing Oven EB 10-II with a digital ruler system including a line laser pointer
for manually measuring the creep.
The ruler is connected to a computer and the values are fed into an Excel template which calculates the result
and presents the graphs.
www.WorldofTest.com/universal-testing-machines-q-series
The Q-Series Universal Testing Machines range is designed for quick and reliable
tensile, compression, flexural (bending), shear, peel, fatigue cycling, and constant load
tests on metals, composites, alloys, rigid plastics and films, elastomers, textiles, paper,
board and finished products.
"The Q-Series" is the Fastest Growing Universal Testing Machine/ UTM Line Worldwide
with Unbeatable Price/ Performance Ratio and an industry first
We offer a comprehensive range of Universal Testing Machines with capacities from
2.5kN (500 lbf) up to 2,000kN (400,000 lbf). The Q-line provides very high value to its
users, as it is designed with advanced technology for easy operation and data retrieval
and manipulation - at a very reasonable price, very efficient and comprehensive support
with Qualitest’s professional after sales service team.
Q-Series Universal Testing Machine Range
Model
Capacity
kN
Capacity
lbf
Bench Models
ESM303
Q2.5
Q5
Q10
Q25
Q50
Q100
1.5
2.5 (1 column)
5
10
25
50
100
300
550
1,100
2,200
5,500
11,000
22,000
Universal Force Test Systems
Automatic Creep & Relaxation Tester
Motorized Force Test System - MT-Series
www.WorldofTest.com/automatic-creep-relaxation-tester
www.WorldofTest.com/motorized-force-test-system-mt-series
ISO 3384 and ISO 899-1
With the Automatic Creep and Stress Relaxation Tester - EB-18-II-3 for Testing of Rubber - tests can be done.
The instrument is based on our triple temperature oven EB 07, which means that each test station can run with
an individual temperature.
The test rigs are based on our relaxation rig EB 02, but lowering and raising of the rigs is motor driven. The
compression or tension of the samples is also motor driven with a servo motor.
The test rigs are built into a plastic cabinet made of polycarbonate and aluminum profiles. The cabinet is cooled
by Peltier elements which keep a constant room temperature around the test stations.
Stress Relaxation Tester
Meeting ASTM D882 & ASTM D3354 Standards
Full-Featured Force Test Stands for Film and Paper
In the past, film extruders, paper producers, converters, and woven/non-woven fabric producers
have had the choice of test stands and universal test machines which are either value-priced
peak-force-only machines, or expensive computer-operated integral-load cell machines. Now you
can have the best of both worlds in a single instrument. The series MT-1500, a simple to use
computer operated tester, with Quality Control software for automatic calculation and graphical
display of break, elongation, yield, modulus, and other, tension and compression force information.
Improved Film & Paper Quality, Increased Profit Margins
www.WorldofTest.com/stress-relaxation-tester
ISO 3384, ISO 6914, ASTM D 6147
Stress Relaxation Tester - EB 02 Relaxation system for continuous measurement in either compression or
tension. The Stress Relaxation Tester - EB 02 meets the requirements in ISO 3384, ISO 6914 and ASTM D6147.
The relaxation rigs are used in combination with the cell ageing ovens our new range of ovens when testing at
elevated temperature.
The Series 1500 Precision Force Test Stand is a proven tool for more closely controlling nominal
and peak strength and elongation characteristics to speed your:
• Research and development of new film and paper products, converted materials,
wovens/non-wovens, fabrics and textiles.
• Inspection of incoming film and paper products
• In-process checks to ensure on-spec product for converting operations& Quality-control
1
27
4
ADVANCED
TESTING
ADVANCED
TECHNOLOGIES
TESTING
5
TECHNOLOGIES
Universal Force Test Systems
Low Temperature Tester – Combo
Programmable Motorized Force Test Systems - ESM 303
Low Temperature Tester – Combo
www.WorldofTest.com/programmable-motorized-force-test-systems-esm-303
www.WorldofTest.com/low-temperature-tester-combo
The ESM303 is a highly configurable single-column force tester for tension and compression measurement
applications up to 300 lbF [1.5 kN], with a rugged design suitable for laboratory and production environments.
Sample setup and fine positioning are a breeze with available FollowMeTM force-based positioning - using your
hand as your guide, push and pull on the force gauge or load cell to move the crosshead at a variable rate of
speed.
With generous travel, clearance, and depth dimensions, a wide range of tests can be performed, including break
testing, cycling, limit testing to a load or distance, load holding, elongation testing, tensile testing, compression
testing, and more. Satisfy various test methods through an easy-to-use menu, allowing the configuration of test
speed, force and distance limits, cycling, preload, and many other functions, all protected by a password. Save
up to 50 profiles to accommodate a range of test methods.
When the ESM303’s clearance is insufficient for the application, its modular mechanical design allows for singleand double-column extensions. Modularity extends to the controller functions as well. Individual functions, such
as travel measurement, cycling, load holding, etc., may be purchased either upfront or enabled in the field through
an activation code. This a-la-carte platform allows for custom configuration as appropriate for the application and
budget.
Electronic Tensile Tester - QT-ETT
www.WorldofTest.com/electronic-tensile-tester-qt-ett
ASTM D828, ASTM E4, ASTM D882, ASTM D1938, ASTM D3330, ASTM F88, ASTM F904, ISO 37, JIS P8113
QT-ETT tensile testing equipments are specially designed considering tensile testing requirements for flexible
materials that are commonly used in product packaging to study different properties of materials.
This instrument utilizes Qualitest's latest embedded control system and operating software, with user-friendly
operating interface and intelligent data management system.
Applications
QT-ETT tensile testing equipments can be used to perform different type of tests like traction, stripping, sealing,
tear, compression, bending, and cutting strength of plastic film, composite film, plastic tapes, soft packaging
material, rubber sheets, paper, non-woven fabrics and other packaging materials, widely used in industries
related to production of plastic films, packaging, pharmaceuticals, food, inspection agency, research institutes
etc. to study properties of materials and finished products.
List of basic tests that can be performed using QT-ETT
• Test of Tensile Strength and Elongation Rate
• Test of Tensile Strength at Break
• Tear Resistance Test
• Seal Performance Test
• 90 Degree Peel Test
• 180 Degree Peel Test
• Compression Test of Plastic Bags
• Fastness Performance Test
The TR-Tester, Gehman Tester and Brittleness Tester can be combined using the same base unit and a rig changing system. The combined
instrument consists of a base unit with a cooling bath and the electronics. The three different test rigs are then mounted on a carousel. No lifting
is necessary when switching from one method to another. An automatic computerized Low Temperature Tester increases the precision up to 5
times. The capacity will also increase with about 50 % and not least the labour time will decrease about 75 %.
Gehman Tester
www.WorldofTest.com/gehman-tester
ASTM D1053, ISO 1432
Gehman Tester - ET-02 - Relative Stiffness Characteristics Determination for determination of the relative stiffness
characteristics of vulcanized or thermoplastic rubbers, also called the Gehman procedure. The test is done according
to ISO 1432, ASTM D1053, or technical equivalent standards.
The Gehman Tester - ET-02 - Relative Stiffness Characteristics Determination, has 6 test stations, is computerized
and performs the test automatically.
TR Tester - Low Temperature Retraction Tester
www.WorldofTest.com/tr-tester-low-temperature-retraction-tester
The TR Tester - ET-01 - Low Temperature Retraction Tester is primarily used to determine low temperature characteristics by the temperature retraction procedure according to ISO 2921 and ASTM D-1329.
The TR Tester - ET-01 - Low Temperature Retraction Tester has 6 test stations, is computerized and performs the
test automatically after the cooling media has been cooled down and the samples have been mounted. An automatic
release of the samples is initiated after the pre cooling period has been completed.
The computer controls both the temperature rise and measures the length change of the samples. The results are
displayed in graph and TR10, TR30, TR50 and TR70 values are calculated. The result can also be presented as a
table with length change versus temperature. The TR-values and the table values can be exported to other software
such as spreadsheets.
Low Temperature Compression Set Rig
www.WorldofTest.com/low-temperature-compression-set-rig
Low Temperature Compression Set Rig - EV-09 performs compression set at low temperatures without having to
open the deep-freezer and influence the compression set result has always been a problem.
By using our Low Temperature Compression Set Rig - EV-09 compression rig in combination with a deep-freezer with
a special lid the test can be performed without touching the test piece. All adjustments of height and releasing the
compression are made outside the freezer thus improving the accuracy of the test results.
The Low Temperature Compression Set Rig - EV-09 rig has a digital gauge (0,001 mm), the piston is made of titanium
and the test weight is simply mounted on to the titanium piston. The sample can remain in the test rig for the whole
test period and during the recovery time.
5
26
ADVANCED
TESTING
ADVANCED
TECHNOLOGIES
TESTING
TECHNOLOGIES
Block Oven / Aging Oven
Durometer - Shore Hardness Testers
Analog Durometer HP-Series
www.WorldofTest.com/block-oven-aging-oven
www.WorldofTest.com/analog-durometer
Cabinet Ageing Oven - EB Series
www.WorldofTest.com/cabinet-ageing-oven-eb-series
Cabinet Aging ovens for precision ageing of rubbers and plastics under controlled conditions. EB 04-II and
EB 10-II are shelf ovens and conform to ISO 188, ISO 3383, IEC 811 and technical equivalent standards.
They designed to give very low temperature variations in time and space, low air speed and controlled air
exchange rate. This is achieved by using an inner chamber with a controlled air flow.
Cabinet Ovens are ideal for ageing finished products and large test pieces which are unsuitable for cell
ovens. Both shelves and rods are supplied with the oven for accommodating most types of samples. The
settings are done on the colour touch PLC screen.
Our range of Shore Durometer - HP Series Durometers are suitable for accurate hardness measurement of all natural
and synthetic rubber products, plastics, acrylic glass, acetates, casting resin, polyester, thermoplastics, PVC,
neoprenes, hardboards, wood, leather, and fruits within the Shore A, A0, B, 0, C, D, D0, 00, 000, 000S, E, Qualitest
Variant C (Asker C), L/c. These durometers are the highest precision models on the market with very easy handling.
Digital Durometer HPE-II
www.WorldofTest.com/digital-durometer-hpe-ii
High-end Durometers with the highest quality and accuracy on the market.
DIN ISO 7619, DIN EN ISO 868, NF EN ISO 868, ASTM D 2240 (DIN 53505)
Digital Shore Durometer - HPE-II Series Digital Durometers are high-end hardness testers for accurate and repeatable hardness measurement of rubber, plastics and other elastomers within the Shore A, A0, B, 0, C, D, D0, 00, 000,
000S, E, scales and much more. This potable handy instrument is available in the widest range of scales and L/c as
well as Variant C (Asker C), CS, F and BARCOL.
Cell Ageing Oven - EB Series
www.WorldofTest.com/cell-ageing-oven-eb-series
ISO 188 method A, IEC 811 (EB01), ISO 3384 method B (EB01 LTP)
The Cell Ageing Oven - EB Series are designed for Aging tests according ASTM D 865 Rubber-Deterioration by Heating in Air (Test Tube Enclosure). The ovens can also be used for testing in liquids according to
ASTM D 471 Effect of liquids. Cell ovens and cabinet Ageing ovens perform well inside the apparatus
requirements in ISO 188, IEC 811 and other equivalent standards.
Test Tube Ageing Oven - EB Series
Digital Shore Hardness Tester HPE III
www.WorldofTest.com/digital-shore-hardness-tester-hpe-iii
Shore Hardness - Specimen/Environment Temperature - Humidity
DIN ISO 7619, DIN EN ISO 868, ASTM D2240, NF EN ISO 868, JISK 6253
Qualitest offers Digital Hardness Tester HPE III which provides significant test data for the use in laboratory or field.
Companies that develop or use the products made of soft elastic materials produce, have usually a laboratory in
which the products and raw material are regularly tested according to the standard.
www.WorldofTest.com/test-tube-ageing-oven-eb-series
ASTM D865, ASTM D471, ISO 1817 (EB 11-II, EB 28)
The Test Tube Ageing Oven - EB Series are designed for Aging tests according to ASTM D 865
Rubber-Deterioration by Heating in Air (Test Tube Enclosure). The ovens can also be used for testing in
liquids according to ASTM D 471 and ISO 1817 Effect of liquids. Glass tubes for both standards are
included. Glass tubes for air cooling are included and water cooling can be supplied as an option.
Pusey & Jones Hardness Tester – Plastometer
www.WorldofTest.com/pusey-jones-hardness-tester-plastometer
ASTM D 531
Our top quality Pusey & Jones (P&J) hardness tester (Plastometer) serves for the determination of the penetration
depth on rubber and elastomer materials like rubber rollers and standard blocks made of rubber with a minimum
thickness of 13 mm as well as paper rollers.
The electronic dial gauge is integrated in the instrument and shows the indentation depth to an accuracy of 3 decimal
places (0.000 mm). With the help of a vertical spindle which is integrated on the back of instrument, the dial gauge
can be moved up and down conveniently and precisely.
25
6
ADVANCED
TESTING
ADVANCED
TECHNOLOGIES
TESTING
TECHNOLOGIES
Durometers: Shore & IRHD Hardness Testers
Color Testing Instruments
Portable Models
HPE II - Digital Barcol Hardness Tester
Automatic Film Applicators
www.WorldofTest.com/barcol-hardness-tester-impressor
www.WorldofTest.com/automatic-film-applicators
According to ASTM D 2583 and DIN EN 59
Qualitest’s Analog and Digital models are designed for accurate hardness measurement on fiber-glass glass-reinforced plastics, duro plastics, hard thermo plastics, aluminum, semi-finished and finished products, according to the
Barcol method. Available models include GYZJ series Analog Barcol Impressor Hardness Tester as well as HPE-II
series Digital Barcol Hardness Testers.
Automatic Motorized Durometer - Digi-Test II
The Byko-drive Automatic Applicator is an economical film applicator that improves the consistency of drawdowns. When more than one operator is drawing down the same coating or ink, the dry film appearance will
vary because of different drawdown techniques. Drawdown speed and pressure on the applicator tool will
impact the result. Film thickness, gloss, opacity, and color can vary with differing drawdown techniques. The
byko-drive is available with a vacuum plate or glass plate with clamp. Applicator bars, U-shaped bars,
applicator frames, film casting knifes, and wire-wound rods are acceptable applicators. The byko-drive has a
compact design consisting of a light-weight aluminum chassis and impact resistant thermo-plastic cover.
Viscometer
www.WorldofTest.com/automatic-motorized-durometer
www.WorldofTest.com/viscometer
The most accurate and versatile hardness tester on the market, DigiTest positions itself as the top level
Shore/IRHD hardness tester with a modular design to suit virtually every Shore or IRHD hardness measurement scale for Polymers. The automatic test procedure of DigiTest eliminates the operator’s test influence on
test procedure and thus always provides the most accurate results.
Depending on the hardness scales of your choice, from any of Shore scales A, A0, B, 0, C, D, D0, 00, 000,
000 S, E, micro Shore A, micro Shore D, C, D0, IRHD/DIDC M, N, H, L, VLRH, you can select the most cost
effective combination of required test heads, and expand and upgrade it at any time in the future.
The versatility of the CAP 1000+ and CAP 2000+ Viscometer makes these instruments a practical tool for any
QC or R&D lab requiring quick and easy testing of materials, regardless of application, at high shear rates.
• Provides for viscosity measurements at high shear rates
• LCD display of viscosity in Poise or Pascal-seconds
• Uses less than 2 ml of sample to avoid excess cleaning and material costs
• Automatic viscosity range calibration and cone gap positioning make the viscometer easy to use
IRHD Micro Hardness Tester III
Rotational Viscometers
www.WorldofTest.com/irhd-micro-hardness-tester-iii
www.WorldofTest.com/viscometer
The IRHD Micro Hardness Tester III - New Generation - 3rd series of this popular IRHD Hardness Tester line has a
more convenient and user-friendly operation. Accurate IRHD Micro hardness measurement of soft elastomers such
as O-rings, seals and gaskets, with thickness down to 0.6mm, is guaranteed.
IRHD Micro Hardness Tester III - New Generation offers new advantages, with an excellent price/quality ratio. Testing
of O-rings, molder samples with irregular shapes, seals, etc. are ideal applications for this model. A quick center lever
allows quick and precise positioning of the samples and the measuring head comes with integrated display and
keypad for ease of use. IRHD Micro Compact III comes with standard RS-232 data interface as well as exchangeable
indenters.
To measure the absolute viscosity a rotational viscometer is used. For non-Newtonian liquids a digital
viscometer that applies a precise shear rate is needed. For laboratory viscosity measurement, we offers a
comprehensive line of rotational viscometers. The viscometer product line can measure viscosity from a near
water-like viscosity to a very high viscosity range for epoxy, sealants, and paste. To measure viscosity under
a high shear rate Cone and Plate viscometers are available. The easy to use digital Stormer viscometer is also
part of the rotational viscometer family.
Transparency Meter - Haze Gard-i
www.WorldofTest.com/transparency-meter-haze-gard-i
Transparent products can have a milky or fuzzy appearance dependent on their light scattering
behavior. The haze-gard i quantifies the visual perception with objective measurement criteria:
• Total transmittance
• Transmission haze
• Clarity
Gradient Oven
www.WorldofTest.com/gradient-oven
The Gradient Oven is a test apparatus for evaluating the baking and drying behavior of liquid coatings, powder
coatings, resins, plastics, etc. A production baking process can be simulated by programming heat-up speed,
baking temperature and time.
• Saves time and energy
• Generates various curing temperatures on one panel
• Simulates the temperature profile of a production oven in the laboratory
7
24
ADVANCED
TESTING
ADVANCED
TECHNOLOGIES
TESTING
TECHNOLOGIES
Color Testing Instruments
Charpy / Izod Pendulum Impact Testers
Portable Spectrophotometers - Color Meters
High Performance Charpy / Izod Impact Tester Q-Impact 50
www.WorldofTest.com/portable-spectrophotometers-color-meters
www.WorldofTest.com/high-performance-charpy-izod-impact-tester-q-impact-50
Qualitest offers extensive range of advanced plastics and Color testing equipment such as Portable Spectrophotometer – Spectro-Guide & Color-Guide which is used for total Appearance Control - color and gloss in
one unit.
Mobile Color Measurement. Store up to 200 standards with tolerances and 999 samples in the color-guide's
memory and control color whenever and wherever it is needed.
ISO 179, ISO 180, ASTM D256
The Q-Impact 50 High Performance Charpy/ Izod Impact Tester is a high performance impact tester
designed to precisely determine the absorbed impact energy and resistance to breakage of plastic specimens. The tester conforms to both ASTM and ISO standards. The innovative design allows this tester to be
used for both Izod and Charpy test. The max capacity of this tester is 22J (Izod) and 50J (Charpy)
Micro-Gloss 20, 60, 85, 45, 75 & TRI
Digital Charpy/Izod Impact Tester - Q-Impact 25
www.WorldofTest.com/gloss-meters
The micro-gloss has been the unsurpassed industry standard in gloss measurement for many years. It is the
only gloss meter combining highest accuracy, ease-of-use and multiple functionality – essential for today`s
testing requirements
QualiGloss Series Gloss Meter
www.WorldofTest.com/qualigloss-series-gloss-meter
A gloss meter is an instrument which is used to measure gloss of materials such as the wood floor, paint,
plastics and paper. Gloss is a measure of the proportion of light that has a specular reflection from the surface.
A surface such as a mirror has a high gloss, where a surface such as chalk has less because the light reflected
is diffused. Numerous international technical standards define the method of use and specifications of different
types of gloss meter used on different types of materials. Some of these materials include ceramics, paper,
metals, and plastics. A major user of gloss meters is in the auto industry. The uses for automobiles extend from
the factory floor to the repair shop.
Orange Peel / DOI Meter - Wave Scan
www.WorldofTest.com/orange-peel-doi-meter-wave-scan
Appearance control is no longer limited to final topcoat inspection. The orange peel meter scans the optical
profile of high gloss surfaces using a laser light source. An additional, infrared –high energy LED allows
measuring the same structure spectrum (0.1 – 30 mm) on medium gloss surfaces. The dullness measurement is recorded with state-of-the-art CCD camera technology. It gives information on the image forming
qualities of the surface caused by structures < 0.1mm.
Universal Paint Inspection Gauge
www.WorldofTest.com/universal-paint-inspection-gauge
The byko-cut universal is a multi-purpose paint testing instrument that measures paint coating thickness,
paint adhesion, and coating hardness.
• Can measure coating thickness on metal, wood, plastic, and other rigid substrates
• Multi-layer coating thickness can be measured
• Built-in microscope can also be used for assessing paint imperfections
www.WorldofTest.com/q-impact-25-digital-charpyizod-impact-tester
ASTM D-256, ASTM D-6110, ISO 179, ISO 180
Q-Impact 25 is a high performance impact tester designed to precisely determine the absorbed impact energy
and resistance to breakage of plastic specimens. The tester conforms to both ASTM and ISO standards. The
instrument is capable of recognizing the height loss of swinging pendulum accurately and quickly determine
the impact strength via a high precision digital encoder and calculating system. In combination with automation features, the Q-Impact 25 applies pendulum auto- braking, pendulum auto-lifting and pendulum
auto-identification to ensure the operator`s safety and increase the working efficiency of impact test.
Analog Izod / Charpy Impact Tester - QPI-IC
www.WorldofTest.com/analog-izod-charpy-impact-tester-qpi-ic
ASTM D256 - ISO 180
The QPI-IC Basic Izod Impact Tester determines the energy required to break standard plastics impact specimens.
Meeting the corresponding ASTM, & ISO test methods, this equipment is equipped with both Izod and Charpy Vise
and made according their respective standards. Users can read the endurance of impact strength directly from the
scale.
Impact Specimen V-Notcher QuickNotch-II
www.WorldofTest.com/impact-specimen-v-notcher-quicknotch-ii
ASTM D256
The Notcher for Impact Test Specimen machine can cut various depths for V shapes according to standards. To
produce IZOD and CHARPY specimens, the user will cut a V angle along the middle of the specimen to decrease the
diversity. The cutting speed of the Notcher for Impact Test Specimens machine can be adjusted according to the
material of the specimen, as well as, to different angle depths, where the user can adjust or change the shape of the
cutting tool to produce different angle cuts.
Film Impact Tester - QT-FIT-3J
www.WorldofTest.com/film-impact-tester-qt-fit-3j
ASTM D3420
The impact resistance of films is obtained by measuring the energy consumed by hemispheric impact head to make
films rupture under controlled impact conditions to evaluate the impact resistance of material and its effects.
8
23
ADVANCED
TESTING
ADVANCED
TECHNOLOGIES
TESTING
TECHNOLOGIES
Plastics Pipe / PVC Testing Instruments
Color Testing Instruments
Light Booths
Hydrostatic Pressure Tester
www.WorldofTest.com/light-booths-visual-color-control
www.WorldofTest.com/hydrostatic-pressure-tester
ASTM D-1598, ASTM D-1599, ISO 1167
Conforming to ISO 1167 and ASTM D 1598 & 1599, the Hydrostatic Pressure testing system is mainly used
to determine the resistance of thermoplastics pipes to constant internal water pressure at constant
temperature.
This system is mainly used in testing the short-time hydraulic failure and resistance to constant internal
pressure of the plastic pipes for the transport of fluids. The test stations work fully independently of one
another, according to your testing application.
Thermal Recycling Testers
www.WorldofTest.com/thermal-recycling-testers
ASTM F1335, ISO 15874, ISO15875, ISO 15876, ISO 15877
The Thermal Recycling Testers for Plastic Pipes is used to evaluate the function of hot and cold
water-pipes PP,PE-X, PVC-C, PB), under a certain pressure for 5000 cycles. A test assembly of pipes
and fittings is subjected to temperature cycling by the passage of water under pressure using hot and
cold water alternately for a specified number of cycles. While being subjected to temperature cycling parts of the assembly of pipes and fittings
are maintained under tensile stress and/or flexural strain by the use of static clamps.
Pipe Cutting and Chamfering Machine
www.WorldofTest.com/pipe-cutting-and-chamfering-machine
The Pipe Cutting and Chamfering Machine is used for cutting and chamfering big pipes. It is an ideal
machine for pipe manufacturers as well as quality inspections and research institutions.
Colors appear differently under different lighting conditions. Use of a light booth to simulate different lighting conditions helps to obtain objective
color assessment, improves communication and reduces product rejections. We offer a complete line of light booths which allow you to see what
your product will look like – independent of location and environmental influences.
Light Booth - Spectra
For critical color evaluation the byko-spectra light booth offers every option and feature that is needed to
evaluate and communicate color with absolute confidence.
• Comparison of standard and sample in a color-neutral environment
• Five different controlled light sources
• Viewing under ultraviolet light to detect and evaluate optical brighteners or fluorescent pigments
• No warm-up time or flickering which ensures quick and reliable color judgment.
• Automatic light source sequencing to standardize testing procedures
• Color Guard II timing center tracks light source usage and indicates when to replace the lamps
Light Booth - Spectra Basic
For general color evaluation under defined lighting conditions
• Comparison of standard and sample in a color-neutral environment
• Three different controlled light sources: Daylight D65, Incandescent light A, Department store light CWF or
TL84
• Easy to operate by using individual switches for each light source
• Can be set up in minutes without any tools
• Economical testing of large samples in a compact design – for laboratory and production
Light Booth - Spectra Effect
Pipe Opacity Tester
www.WorldofTest.com/pipe-opacity-tester
ISO 7686:2005
The Pipe Opacity Tester is used to determine the opacity of pipes and fittings. It is an ideal device for pipe manufacturers,
research and inspection institutions. It consists of optical source, Luminous flux collection system, and automatic specimen going in/out controlling system, specimen automatic moving device and specimen support.
For objective evaluation of color under different viewing angles, and flake characterization under different
illumination conditions
Color evaluation for daylight under 6 defined viewing angles: A tiltable sample table allows the samples to be
presented at the following angles: -15°/15°/25°/45°/75°/110°. The illumination system also pivots, insuring
excellent agreement with the measurement results of multi-angle color instruments.
Light Booth - Spectra Mini
Ring Stiffness Tester
www.WorldofTest.com/ring-stiffness-tester
ISO 9969-2007, ISO9967
The Ring Stiffness Tester RST30 is designed to measure the ring stiffness, ring softness and creep rate for plastic pipe.
The unique design makes this tester especially suitable for large diameter pipe. The RST30 features built in measurement of the inner diameter of the pipe and the compression plate load-cell interface is designed to reduce the risk of
damaging the load cell during testing. The rigid compression plates ensure the results will be free of machine deflection
and increases the accuracy of the test results.
For general color evaluation of small samples
• Comparison of standard and sample in a color-neutral environment
• Three different controlled light sources: Daylight D65, Incandescent light A, Department store light CWF or
TL84
• Easy to operate by using individual switches for each light source
• Can be set up in minutes without any tools
9
22
ADVANCED
ADVANCED
TESTING
10
TECHNOLOGIES
TESTING
TECHNOLOGIES
More Film Testing Instruments
Drop Impact Testers
Minimum Film Formation Temperature Tester
Buckling Resistance Tester for Thermoplastic Drainage Cover
www.WorldofTest.com/minimum-film-formation-temperature-tester
www.WorldofTest.com/buckling-resistance-tester-thermoplastic-drainage-cover
DIN 53787 - DIN 53 366 – ASTM D 2354 - ASTM D 1465 – ISO 2115 - ISO/DIS 4622
Test instrument with a ground hard-chrome plated metal plate as a measuring plate for depositing the
specimens. By heating and cooling the measuring plate any variable temperature gradient within the range of
-30°C to +250°C can be produced and kept constant for any given period.
BS EN 14830:2006, BS EN 13598-2:2009
Buckling Resistance Tester is used to simulate the conditions when manhole is buried underground and for checking
its resistance to the force from underground water.
Film Heat Shrink Tester
Drop Impact Testers
www.WorldofTest.com/film-heat-shrink-tester-fhst-140
ASTM D2732
QT-FHST-140 is designed to evaluate the heat shrinking property of plastic materials and films. The application
of heat causes plastic films to rapidly contract; this effect can be used for sealing and packaging application.
This instrument is used for determination of heat shrinking performance and dimensional stability of various
plastic films, tubes, hard PVC films for tablets, and packaging sheets.
Heat Seal Tester - QT-HST-E
Drop Weight Impact Tester for Plastic Pipes
www.WorldofTest.com/drop-weight-impact-tester
300C (ISO 3127, EN744, EN1411) & 300D (ASTM D2444)
The Falling Weight Impact Tester is used to perform impact tests on plastic pipes, conforming to ISO 3127, EN744 and
EN1411. Test pieces are subjected to blows from a falling striker, of specified mass and shape, dropped from a known
height onto specified positions around the circumference of the test piece. The true impact rate of the batch, or production run from an extruder, is estimated.
www.WorldofTest.com/heat-seal-tester-qt-hst-e
ASTM F 2029
Qualitest QT-HST-E is heat seal testing equipment specially designed to simulate heat sealing condition and
affecting parameters for determination of heat sealing ability of plastic films, composite films, coated paper, and
other sealing films under specified sealing conditions.
Hot Tack Tester - QT-HTT
Gardner Impact Tester
www.WorldofTest.com/gardner-impact-tester
ASTM D 2794, D 5420, D 3029, D 4226 and G14
Qualitest offers extensive range of advanced plastics and color testing equipment such as Gardner Impact Tester which
is a widely used device for the coating and plastic industries.
www.WorldofTest.com/hot-tack-tester-qt-htt
ASTM F1921, ASTM F2029
QT-HTT Hot Tack Tester is used to test adhesive or peeling strength of packaging films used for heat seal
packaging material.
This device is compatible to test the different types of thermoplastic films sealing at different temperature,
pressure and at controlled speed to evaluate different application criteria for packaging materials considering the
environmental conditions for actual application.
Hot tack tester measures the strength of heat seals formed between thermoplastic surfaces of flexible webs,
immediately after the seal has been made and before it cools to room temperature. It simulates packaging and
sealing environment and enables to analyse its effects on seals.
Drop Dart Impact Tester for Plastics Film
www.WorldofTest.com/drop-dart-impact-tester-plastics-film
Drop Dart Impact Tester - ASTM D1709
Series DX-8000 Dart Impact testers Full-Featured models for Film and Sheet
The Model DX-8285A Drop Dart Impact tester with Pneumatic Sample Clamp and Pneumatic Dart release Mechanism
We offer the Series DX-8000, a simple to use stand-alone, non-instrumented tester, for measuring impact resistance of
film, sheet, and laminated materials.
Falling Dart Impact Tester - QT-FDIT
www.WorldofTest.com/falling-dart-impact-tester-qt-fdit
ASTM D1709, ISO 7765-1, JIS K7124
It is important to understand the impact resistance of packaging materials for since it will be subjected to impacts during
transportation and loading. It is widely used in R&D departments, laboratories, packaging industries, inspection agencies,
and film manufacturing units etc. to determine the maximum energy that their products can withstand without failure.
QT-FDIT determines the energy required for plastic films and foils to fail under the impact of a free falling dart under specific
conditions. This energy is expressed in terms of the weight of the dart falling from a specified height which would result in
50% failure of specimens tested.
21
10
ADVANCED
TESTING
ADVANCED
TECHNOLOGIES
TESTING
TECHNOLOGIES
Specific Gravity Tester – Densimeter
Film Thickness Gauges
Ball Rebound Tester for Foam Materials
Thickness Tester - CX-Series
www.WorldofTest.com/ball-rebound-tester
www.WorldofTest.com/thickness-tester-cx-series
The microcomputer controlled ball-rebound-tester is designed for the determination of the rebound elasticity of
foam materials acc. to ASTM D 3574 and DIN EN ISO 8307.
A quick, easy and reliable measurement can be done with the ball-rebound-tester because of its innovative
technique. This top quality unit is ideal for the quality control of foam materials during the production and in the
acceptance department.
A two lined display reads the measured value and median value in %. The testing device is equipped with a
serial interface.
The Thickness Tester - CX-1020 revolutionized capacitance film thickness gauging with the introduction of
our patented AutoCal™ concept - by adding an absolute (contact) measurement probe with the capacitance
sensor, the Thickness Tester - CX-1020 is self-calibrating. No more need to create detailed recipes to recall
calibration information. Accidental operator errors are reduced, accuracy is increased, because different
polymers and blends require different calibration values.
Thickness Tester - Model 543
www.WorldofTest.com/thickness-tester-model-543
Specific Gravity Tester – Densimeter
Digital indicator and stand provides a convenient, cost-effective way to perform plant floor or laboratory spot
checks of film and sheet thickness. Also ideal for tensile test sample thickness measurement. Resolution to
50 millionths of an inch with accuracy to 120 micro inches. Glass scale technology is rugged and reliable. Can
be connected to SPC software for statistical and graphical data analysis (option).
www.WorldofTest.com/specific-gravity-tester-densimeter
Densimeter - EW-300SG
www.WorldofTest.com/densimeter-ew-300sg
• Only 10 seconds to measure density and volume.
• Ideal machine for interval testing in a production line.
Thickness Gauge EV 01
Densimeter - MD-300S
www.WorldofTest.com/thickness-gauge-ev-01
www.WorldofTest.com/densimeter-md-300s
• Popular model with resolution of 0.001g/cm3. (Upgraded from previous model MD-200S)
• Compact body and accurate density measurement for solid and liquid samples.
Densimeter - SD-200L
www.WorldofTest.com/densimeter-sd-200l
• Top precision model with density resolution of 4 decimal places for both Solid and Liquid.
• Suitable for plastic pellets, films, rubbers , fabric, advanced materials, and liquid density in the field of medical,
food, and chemical that require accuracy.
EV 01 Thickness gauge series are special thickness gauges, with the possibility of many different applications, measuring foot and table.
It can be used for computerized compression set testing according to ISO 815 and thickness measurement
according to ISO 23529 for rubber or ISO 5084 for textiles and consists of the following parts:
• Digital Gauge modified for correct measuring pressure for rubber, plastic or textile testing, including 10 mm
gauge block, lifting cable, measuring foot and weight for thickness measurements.
• Stand, of stable construction, with the possibility of fine adjustments of the height.
• Interface Kit, EV 01.04 for PC-Computer, including cables and foot pedal. (Optional)
• Software EC 02 for thickness measurements and Compression Set for PC-Computers.
Densimeter - MDS-300
www.WorldofTest.com/densimeter-mds-300
• Easy density measurement of not only solid and liquid sample density, but added functionality to measure
powder density with resolution of 0.001g/cm3 and reference value of 0.0001g/cm3.
• Newly designed sensor and auto-weighing function for improved accuracy and working efficiency.
Densimeter - MDS-3000
www.WorldofTest.com/densimeter-mds-3000
• Measuring capacity up to 3kg
• Wide measuring capacity enables to measure the samples without cutting, and calculates an average density for
the whole sample.
• Sensor & water tank size can be customized depending on the sample size.
• Easy and convenient "auto-weighing function" as a standard feature.
11
20
ADVANCED
TESTING
ADVANCED
TECHNOLOGIES
TESTING
TECHNOLOGIES
Film Thickness Gauges
Brittleness & Freezing Testers
Water Vapor Permeability Tester - QT-WVP
Brittleness Temperature Tester QT-BPT
www.WorldofTest.com/water-vapor-permeability-tester-qt-wvp
www.WorldofTest.com/brittleness-temperature-tester-qt-bpt
ASTM E96, ASTM D1653, ISO 2528, DIN 53122-1, TAPPI T464, JIS Z0208
Water Vapor Permeability Tester QT-WVP-300 series is used to test the water vapor transmission rate (WVTR)
of a wide range of materials by Gravimetric Method. It is ideal for advanced water vapor permeability testing for
research and development companies and has the reliability, speed, versatility and accuracy required for Quality
Control testing.
Special feature of its 12 chamber adoptability for independent as well as average testing of similar or different
samples allow flexibility to user for expansion considering the number of testing chambers without purchasing a whole set of new instrument. User
can perform average testing of similar samples as well as independent testing simultaneously.
Wide range of testing can be adopted by additional external fittings for packaging container, bags, pouch, bottle, can, bowl, aluminum coated
containers, and many other packaging containers.
ASTM D746, JIS-K 7216, ISO 812, and GB/T 15256
The Brittleness Point Temperature Tester - QT-BPT Series Brittleness Tester covers the determination of the temperature at
which rubber, plastics and elastomers exhibit brittle failure under specified impact conditions. Samples to be housed in a
thermostatic bath based on the reference standards ASTM D746, ISO 812, as well as and other international standards.
Water Vapor Permeability Tester – QT-WVP-200
www.WorldofTest.com/water-vapor-transmission-rate-tester
Water Vapor Permeability Tester QT-WVP-200 series is used to test the water vapor transmission rate (WVTR)
of a wide range of materials by Electrolytic Method. It is ideal for advanced water vapor permeability testing for
research and development companies and has the reliability, speed, versatility and accuracy required for Quality
Control testing.
It uses state of the art automation technology to delivers accurate performance with faster test results. Its user
friendly interface enables a new user to adapt easily.
Qualitest offers the highest quality Electrolytic detection sensor in the market with the lowest replacement cost.
The built in software performs complicated data analysis and displays the relations in the form of graphs and
data tables which significantly reduces the time to determine the permeability rate and relations between affecting parameters with variety of test subjects.
Film Thickness Gauges
Film Thickness Tester - MX-Series
Brittleness Tester - ET 05 II
www.WorldofTest.com/brittleness-tester-et-05-ii
ASTM D746, ASTM D2137, ISO 812, ISO 974
It is used for the automatic determination of Brittleness point according to ISO 812, ISO 974, ASTM D746 and ASTM D2137.
The price includes the instrument and software, but not the computer.
The test rig is raised by pneumatic cylinders, which require an air supply of 6 Bar. The brittleness tester is designed as a
falling weight tester, where the speed is set by the height and the energy by the attached weights. The computer controls
the temperature rise and measures the temperature at impact. The result from each stroke is entered by typing the result in
the software. The speed is measured after the impact, to verify the speed loss during impact.
Freezing Tester
www.WorldofTest.com/freezing-tester
Our Freezing Tester units are available in vertical or horizontal configurations are used to test the bending/flexing durability
of rubber, plastics, synthetic leather, shoes, etc., under cold temperatures as low as -30°C or -70°C depending on the
selected model. The test chambers can be equipped with a variety of flexing/bending fixtures made of stainless steel.
These models conform to ASTM D 1790, and ASTM D1593 standards.
Apparent / Bulk Density Tester
www.WorldofTest.com/mx-series-film-thickness-tester
In the past, film and paper producers and converters have had the choice of caliper gauges which were either
value-priced thickness-only machines, or expensive computer-operated machines. Now you can have the best
of both worlds in a single instrument. The MX-series Micro Gauges are simple to operate, stand-alone or PC-operated testers with optional Quality Control software for automatic calculation and graphical display of thickness
profiles, statistics, and other information.
www.WorldofTest.com/apparent-bulk-density-tester
The Apparent Density Tester - Bulk Density Tester series testers are used to measure apparent density, bulk factor,
and where applicable, the pourability of plastic materials such as molding powders. There are three methods according
to ASTM D 1895 that are applicable to various forms of these materials that are commonly encountered - from
powders and granules to large flakes and cut fibers. The apparatus consists of a measuring cup which is polished
inside and a funnel.
High Precision Electronic Thickness Meter - QT-ETM
www.WorldofTest.com/high-precision-electronic-thickness-meter
ISO 4593, ISO 534, ISO 3034, ASTM D645, ASTM F 2251, ASTM D374, ASTM D1777, TAPPI T411, DIN
53105, DIN 53353, JIS K6250, JIS K6328, JIS K6783, JIS Z1702, BS 3983, BS 4817
QT-ETM is a simple to use stand-alone and/or computer operated thickness tester, with optional Quality Control
software for automatic calculation and graphical display of thickness profiles, statistics, and other information.
QT-ETM is best suitable instrument to perform thickness measurement or comparative measurement analysis
of thin films of thickness 0 to 1.5mm with high accuracy of ±0.1µm.
19
12
ADVANCED
TESTING
ADVANCED
TECHNOLOGIES
TESTING
TECHNOLOGIES
Sample Specimen Preparation Equipment
Film Permeability Tester
SpeciCut II-P
Digital Elmendorf Tearing Tester – QT-DET
www.WorldofTest.com/sample-preparation-machine-specicut-ii-p
www.WorldofTest.com/elmendorf-tear-strength-tester
Hard Plastic Tensile Specimen Cutting Machine
The Sample Preparation Machine - SpeciCut II-P is a manually operated, economical way to prepare tensile
bars and other samples. The Sample Preparation Machine - SpeciCut II-P is an enclosed machine which
includes integral misting, chip removal and motor speed regulation units. The chip shield around the control
head protects the area around the unit from debris, while the sound deadening package absorbs much of the
noise of the unit. A series of power switches located on the front of the panel enables the operator to easily
access those accessories desired, while the emergency stop switch located on the machine cuts power to all
systems simultaneously.
ASTM D1922, ASTM D1424, ASTM D689, ISO 13937-1, ISO 6383, ISO 1974, GB/T16578.2-2009, GB/T
455, TAPPI T414
QT-DET Digital Elmendorf Tearing Tester takes the Elmendorf method and is used to determinate tearing
resistance property of films, sheets, flexible PVC, PVDC, waterproof films, woven materials, polypropylene,
polyester, paper, cardboard, textile and non-woven, etc.
Film Permeability Tester
www.WorldofTest.com/film-permeability-tester
SpeciCut III
www.WorldofTest.com/cnc-sample-preparation-machine-specicut-iii
The SpeciCut III CNC sample preparation machine is cost effective in motion control application of up to 3 axes.
The motion control is based on numerical control Technology. The machine adopts a simple connectivity and a
single commercially available USB cable is used for communication between the PC and control board which
can be placed as per user preference.
SpeciCut IV
Gas Permeability Tester - QT-GPT
www.WorldofTest.com/gas-permeability-tester-qt-gpt
ASTM D1434, ISO 15105-1, ISO 2556, JIS K7126-A
Gas Permeability Tester- QT-GPT-500 is used to test the gas transmission rate (GTR) of packaging material by differential pressure method.
This instrument is generally used to measure transmission rate of Oxygen (O2), Nitrogen (N2), Carbon
dioxide (CO2), and other Non-inflammable and non-etchant gases through and packaging container so
as to ensure the quality of material inside package is maintained as required.
www.WorldofTest.com/cnc-sample-preparation-machine-specicut-iv
Oxygen Permeability Tester - QT-OPT-201
The CNC Sample Preparation Machine - SpeciCut IV - Flat Samples is a PC controlled system capable of
controlling all 4 axes. The motion control is based on numerical control Technology. The machine adopts a
simple connectivity and a single commercially available USB cable is used for communication between the PC
and control board which can be placed as per user preference.
www.WorldofTest.com/oxygen-transmission-rate-tester
SpeciLathe I
www.WorldofTest.com/cnc-sample-preparation-machine-specilathe-i
The Mini NC Lathe - SpeciLathe I is a Compact NC Lathe for various metals and non-metals. The motion
control is based on numerical control Technology, which is programmable for a range of specimens. The
Turret head and the tail stock features in the lathe enable to operate the machine for various purposes and the
Spindle speed can be reached at 4000 rpm. The in-build cover prevents the operator from Dust and noise.
SpeciLathe II
www.WorldofTest.com/mini-nc-lathe-specilathe-ii
The Mini NC Lathe - SpeciLathe II is used for Sample preparation from various metals and non-metals. The
motion control is based on numerical control Technology, which is programmable for a range of specimens.
It employs an integral microcomputer to prepare those specimens which we have programmed in accordance
with the customer’s requirements. The Turret head and the tail stock features in the lathe enable to operate
the machine for various purposes. The in-build cover prevents the operator from dust and noise.
ASTM D3985, ASTM F2622, ASTM F1307, ASTM F1927, ISO 15105-2, DIN 53380-3, JIS K7126-B
Oxygen Permeability Tester - QT-OPT-201 is ideal for industrial application laboratory testing of material
for Oxygen permeability testing for quality control, research and development on plastic, metal, paper
and rubber materials that are generally used as packaging materials for storage, preservation or transportation of perishable and oxidizable materials.
It can also be used for research laboratories to evaluate and define permeability behaviour of material.
Oxygen Permeability Tester - QT-OPT-210
www.WorldofTest.com/oxygen-permeability-tester-qt-opt-210
ASTM D3985, ASTM F1927, ASTM F1307, ASTM F2622, ISO 15105-2, DIN 53380-3, JIS K7126-B
Oxygen Permeability Tester - QT-OPT-210 is ideal for advanced Oxygen permeability testing for quality
control, research and development on plastic, metal, paper and rubber materials that are generally used
as packaging materials for storage, preservation or transportation of perishable and oxidizable materials.
It is used for research laboratories to evaluate and define oxygen permeability behaviour of material.
The built in software performs complicated data analysis and displays the relations in the form of graphs
and data tables which significantly reduces the time to determine the permeability rate and relations
between different output parameters of a variety of test subjects.
It is fully equipped with high level of accuracy and precision with reliable data output required for research
analysis and Quality Control testing.
18
13
ADVANCED
TESTING
ADVANCED
TECHNOLOGIES
TESTING
TECHNOLOGIES
Friction, Adhesive, Tearing Testers
Specimen Dies & Clicker Presses
LME Laboratory Mixing Extruder
Molding Press for Plastics Sample Preparation
www.WorldofTest.com/lme-laboratory-mixing-extruder
www.WorldofTest.com/molding-press-plastics-sample-preparation
The LME Laboratory Mixing Extruder is a unique laboratory tool developed to evaluate the process ability of a
variety of plastics and rubbers prior to production. From very fine powders to coarse materials, the LME will
meet many extruding needs. The LME possesses a moveable header and dial gauge that allows for constant
mixer adjustability. While in operation, the rotational shearing (mixing) is controlled by adjusting the distance
between the end of the rotor and the inside header. This unique feature, not found in other extruders, allows for
various extrudate mix levels in a single sample run. The rotational shearing of the LME system provides extensive and intensive mixing and can be used in the production of polymer blends or alloys. These blends have
Proper sample preparation will achieve accurate and consistent results. Most variation in testing occurs before the test is
performed as sample preparation plays a major role in final results. These machines are convenient for preparing samples as
they ensure uniform process and save time.
been found homogeneous enough to be spun into fibers over the entire range of composition. Since mixing may be independently adjusted, agglomerates of additives, such as fillers or pigments, may be accurately controlled.
Friction, Adhesive, Tearing Testers
Coefficient of Friction Tester - COF Tester - Peel Tester
www.WorldofTest.com/coefficient-friction-tester-cof-tester
Qualitest covers a complete and competitive range of Coefficient of Friction Testers for plastic films, sheets,
rubber, paper and paper board, PP woven bags, fabrics, metal-plastic composite belts for communication
cables, convey belts, wood, coatings, brake pads, windshield wipers, shoe materials, tyres, and other materials.
Specimen Dies & Clicker Presses
www.WorldofTest.com/specimen-dies-molds
Specimen Cutting Dies
Fully Certified ASTM, DIN and ISO dies.
High quality range of specimen cutting dies and sample cutter are made exactly according to the specific ASTM, DIN,
ISO, or JIS standards and are highly accurate for perfect preparation of your test specimens. All of these specimen
cutting dies come in a padded carrying case and are supplied with full certification. Qualitest also offers re-sharpening
service for these specimen dies and maintain highest quality of production and standards.
Each of our cutters comes with a fully detailed "Inspection Report" and a "Certificate of Compliance" to NIST/SCC and
the ISO Guide #25.
ASTM Standard Cutting Dies
Adhesive Tape - Roller Pressing Machine
ASTM D-412 A Tensile Sample Cutting Die
ASTM D-1708 Micro tensile Die
www.WorldofTest.com/adhesive-tape-ink-transfer-testing
ASTM D-412 B Tensile Sample Cutting Die
ASTM D-624 B Tear Sample Cutting Die
JIS C2107, JIS Z0237
This instrument is used to applying a layer of ink from adhesive tape to test sample by pressing the test sample
and printed adhesive tape together, this operation is conducted under controlled condition with controlled load,
rolling speed, rolling time, etc. Which then is separate by Disk Peeling tester to determine the optimum conditions for transferring ink from adhesive tape to sample material.
ASTM D-412 C Tensile Sample Cutting Die
ASTM D-624 B Tear Sample Cutting Die with Slit
ASTM D-412 D Tensile Sample Cutting Die
ASTM D-624 C Tear Sample Cutting Die
ASTM D-412 F Tensile Sample Cutting Die
ASTM D-624 T Tear Sample Cutting Die
ASTM D-638 Type I Tensile Die
ASTM D-1004
ASTM D-638 Type II Tensile Die
ASTM D-1922
ASTM D-638 Type III Tensile Die
ASTM D-746
ASTM D-638 Type IV Tensile Die
ASTM D-746 T50
www.WorldofTest.com/adhesive-tape-ink-transfer-testing
ASTM D-638 Type V Tensile Die
ASTM D-1938
After the Printed adhesive tape is bonded with sample using Adhesive Tape Roller Pressing Machine, this instrument is used to strips off the adhesive tape from test sample using Disk Peeling Tester with controlled force and
speed allowing transfer of ink from adhesive tape to sample. Then the sample and adhesive tape is observed for
the status of ink layer stripped of to determine the ink fastness properties and bonding strength to determine the
optimum conditions for transferring ink to a sample material.
ASTM D-1822-S
Other ASTM Dies Available Upon Request
Adhesive Tape - Disk Peeling Tester
Gel Timer
www.WorldofTest.com/gel-timer
These gel timers are perfect for determining the gel time of resinous plastics, adhesives, crying oils, two component
elastomers, and paints. A low torque, synchronous motor rotates a specially shaped stirrer in the catalyzed resin or
elastomer. As gelation occurs, drag exceeds torque and the motor stalls. This signals an electronic circuit which stops
the clock and activates a flashing lamp. The gel time will show on the LCD display.
JIS Standard
DIN Standard
Miscellaneous
Accessories
JIS K -6301 1
DIN 53504 S1
ISO 34 A
Mallet Handles & Backplate
JIS K -6301 2
DIN 53504 S2
ISO 34 B
Shanks
JIS K -6301 3
DIN 53504 S3
ISO 37, Type 1 through 4
Adaptors
JIS K -6301 4
DIN 53504 S3A
ISO/DIS 3167
Backplate
JIS K -6301 A
.250 x 5.0
Rubber Filled
JIS K -6301 B
.500 x 5.0
Naef adaptor
17
14
ADVANCED
TESTING
ADVANCED
TECHNOLOGIES
TESTING
TECHNOLOGIES
Specimen Molds & Clicker Presses
MFI, Capillary Rheometer, HDT/VICAT & LME
Specimen Molds
Melt Flow Indexer - Quali-Fi 6000/3000 Series
Our molds are made of P20 tool steel that is hardened, ground and polished, then chrome-plated with the
option of Teflon coating. Typical molds have one to four cavities. Various sizes are available. Dies are EDM wire
cut from solid tool steel.
The mold's inside surface is perpendicular to the cutting edge and polished. This insures that test specimens
are cut to uniform thickness. Dies are designed to be re-sharpened. Both molds and dies meet most national
and international standards such as ASTM, DIN and ISO.
www.WorldofTest.com/melt-flow-tester-mfi
ASTM D1238, ISO1133
Quali-Fi 6000 Melt Flow Indexer Series can be used for testing MFR and MVR of polycarbonate, fluoroplastics, as well as
polyethylene, polypropylene, ABS, POM, etc and is related to the melted material viscosity. It enables the operator to
estimate the mean molecular weight and at the same time gives an indication of melt flow ability through the die.
MFI-3000 Series Melt Flow Indexers, with integrated touch panel display measure the melt mass-flow rate (MFR), melt
volume-flow rate (MVR), as well as Melt density test according to the standards ASTM D1238 (A & B Methods), ISO 1133.
Manual Test Sample Clicker Press
www.WorldofTest.com/clicker-presses
Melt Flow Indexer - 5000 Series
Clicker Press units operate well in stand-alone cutting situations, and also compliment a Hydraulic press for
smaller operations.
With the single lever rotation and compressing action, its speed of operation is quite surprising and you can be
up and cutting for a fraction of the cost of a hydraulic press.
ASTM D1238
The LMFI-5000 series melt flow indexers are designed to meet or exceed the ASTM D1238 specifications as well as international standards. They provide an accurate, cost- effective means of monitoring material flow characteristics consistency.
www.WorldofTest.com/melt-flow-tester-mfi
Capillary Rheometer
www.WorldofTest.com/capillary-rheometer
Auto-Pneumatic Clicker Press
www.WorldofTest.com/clicker-presses
This low-cost and high quality Pneumatic clicker press only requires air with min. 73 psi (5 bar) pressure to operate and is
widely used in the rubber and plastics industry for accurately cutting rubber, plastics, and leather specimens. The
Auto-Pneumatic clicker press is available in 3 or 5 ton capacities suitable to cut rubber samples with thickness up to 10 or
15mm respectively. This compact, cost effective and high quality sample cutting press can be used for any testing
laboratory.
Qualitest offers a full range of capillary rheometers that offers state-of-the art features and will meet the demands of a
24-hour a day shop floor operation while maintaining the highest possible level of accuracy, repeatability and sensitivity for
R&D applications. Qualitest line of capillary rheometers is versatile and easy to use yet they offer the most sophisticated
materials characterization, data analysis, and reporting capabilities. Our Capillary Rheometers are available with 10 or 25kN
load cells, single or double barrel configuration and optional features to meet all the needs of QA and R&D in the industry.
HV-3000-D3 / D6 HDT / VICAT Tester
www.WorldofTest.com/hdtvicat-heat-deflection-testers
Laboratory Sized Swing Arm Clicker Press
www.WorldofTest.com/clicker-presses
The reasonably-priced Clicker Press - Model SE-8 Hydraulic Mini-Clicker die cuts exact (dumbells, etc.) samples from split
layered materials. The Clicker Press - SE-8 automatically adjusts the stroke to the proper cutting height. Eight ton cutting
pressure (Optionally up to 25 Ton) allows easy operation. This useful laboratory tool requires a minimum of floor space and
is highly recommended for medium to high specimen cutting needs.
HV-3000-D, the latest compact model of DT/VICAT tester, is designed to measure both heat deflection temperature
(HDT) and VICAT softening temperature (VST) for evaluating the thermal property of plastic materials.
The lightweight design makes HV-3000-D an ideal choice of compact HDT-VICAT tester. The information of temperature in real time from each test station can be read in a single display screen allowing user to monitor test more conveniently. The design of the tester complies with international standards including ASTM, ISO and DIN.
HDT Series- Heat Deflection Tester
www.WorldofTest.com/hdtvicat-heat-deflection-testers
Heat Deflection Temperature Tester (HDT1) is a single station and low-cost system designed in accordance to ASTM D648
as well as ISO 75 to measure material's ability to perform for a short time at elevated temperatures while supporting a load.
The test measures the effect of temperature on stiffness: a standard test specimen is given a defined surface stress and the
temperature is raised at a uniform rate.
15
16
ADVANCED
TESTING
ADVANCED
TECHNOLOGIES
TESTING
TECHNOLOGIES
Specimen Molds & Clicker Presses
MFI, Capillary Rheometer, HDT/VICAT & LME
Specimen Molds
Melt Flow Indexer - Quali-Fi 6000/3000 Series
Our molds are made of P20 tool steel that is hardened, ground and polished, then chrome-plated with the
option of Teflon coating. Typical molds have one to four cavities. Various sizes are available. Dies are EDM wire
cut from solid tool steel.
The mold's inside surface is perpendicular to the cutting edge and polished. This insures that test specimens
are cut to uniform thickness. Dies are designed to be re-sharpened. Both molds and dies meet most national
and international standards such as ASTM, DIN and ISO.
www.WorldofTest.com/melt-flow-tester-mfi
ASTM D1238, ISO1133
Quali-Fi 6000 Melt Flow Indexer Series can be used for testing MFR and MVR of polycarbonate, fluoroplastics, as well as
polyethylene, polypropylene, ABS, POM, etc and is related to the melted material viscosity. It enables the operator to
estimate the mean molecular weight and at the same time gives an indication of melt flow ability through the die.
MFI-3000 Series Melt Flow Indexers, with integrated touch panel display measure the melt mass-flow rate (MFR), melt
volume-flow rate (MVR), as well as Melt density test according to the standards ASTM D1238 (A & B Methods), ISO 1133.
Manual Test Sample Clicker Press
www.WorldofTest.com/clicker-presses
Melt Flow Indexer - 5000 Series
Clicker Press units operate well in stand-alone cutting situations, and also compliment a Hydraulic press for
smaller operations.
With the single lever rotation and compressing action, its speed of operation is quite surprising and you can be
up and cutting for a fraction of the cost of a hydraulic press.
ASTM D1238
The LMFI-5000 series melt flow indexers are designed to meet or exceed the ASTM D1238 specifications as well as international standards. They provide an accurate, cost- effective means of monitoring material flow characteristics consistency.
www.WorldofTest.com/melt-flow-tester-mfi
Capillary Rheometer
www.WorldofTest.com/capillary-rheometer
Auto-Pneumatic Clicker Press
www.WorldofTest.com/clicker-presses
This low-cost and high quality Pneumatic clicker press only requires air with min. 73 psi (5 bar) pressure to operate and is
widely used in the rubber and plastics industry for accurately cutting rubber, plastics, and leather specimens. The
Auto-Pneumatic clicker press is available in 3 or 5 ton capacities suitable to cut rubber samples with thickness up to 10 or
15mm respectively. This compact, cost effective and high quality sample cutting press can be used for any testing
laboratory.
Qualitest offers a full range of capillary rheometers that offers state-of-the art features and will meet the demands of a
24-hour a day shop floor operation while maintaining the highest possible level of accuracy, repeatability and sensitivity for
R&D applications. Qualitest line of capillary rheometers is versatile and easy to use yet they offer the most sophisticated
materials characterization, data analysis, and reporting capabilities. Our Capillary Rheometers are available with 10 or 25kN
load cells, single or double barrel configuration and optional features to meet all the needs of QA and R&D in the industry.
HV-3000-D3 / D6 HDT / VICAT Tester
www.WorldofTest.com/hdtvicat-heat-deflection-testers
Laboratory Sized Swing Arm Clicker Press
www.WorldofTest.com/clicker-presses
The reasonably-priced Clicker Press - Model SE-8 Hydraulic Mini-Clicker die cuts exact (dumbells, etc.) samples from split
layered materials. The Clicker Press - SE-8 automatically adjusts the stroke to the proper cutting height. Eight ton cutting
pressure (Optionally up to 25 Ton) allows easy operation. This useful laboratory tool requires a minimum of floor space and
is highly recommended for medium to high specimen cutting needs.
HV-3000-D, the latest compact model of DT/VICAT tester, is designed to measure both heat deflection temperature
(HDT) and VICAT softening temperature (VST) for evaluating the thermal property of plastic materials.
The lightweight design makes HV-3000-D an ideal choice of compact HDT-VICAT tester. The information of temperature in real time from each test station can be read in a single display screen allowing user to monitor test more conveniently. The design of the tester complies with international standards including ASTM, ISO and DIN.
HDT Series- Heat Deflection Tester
www.WorldofTest.com/hdtvicat-heat-deflection-testers
Heat Deflection Temperature Tester (HDT1) is a single station and low-cost system designed in accordance to ASTM D648
as well as ISO 75 to measure material's ability to perform for a short time at elevated temperatures while supporting a load.
The test measures the effect of temperature on stiffness: a standard test specimen is given a defined surface stress and the
temperature is raised at a uniform rate.
15
16
ADVANCED
TESTING
ADVANCED
TECHNOLOGIES
TESTING
TECHNOLOGIES
Friction, Adhesive, Tearing Testers
Specimen Dies & Clicker Presses
LME Laboratory Mixing Extruder
Molding Press for Plastics Sample Preparation
www.WorldofTest.com/lme-laboratory-mixing-extruder
www.WorldofTest.com/molding-press-plastics-sample-preparation
The LME Laboratory Mixing Extruder is a unique laboratory tool developed to evaluate the process ability of a
variety of plastics and rubbers prior to production. From very fine powders to coarse materials, the LME will
meet many extruding needs. The LME possesses a moveable header and dial gauge that allows for constant
mixer adjustability. While in operation, the rotational shearing (mixing) is controlled by adjusting the distance
between the end of the rotor and the inside header. This unique feature, not found in other extruders, allows for
various extrudate mix levels in a single sample run. The rotational shearing of the LME system provides extensive and intensive mixing and can be used in the production of polymer blends or alloys. These blends have
Proper sample preparation will achieve accurate and consistent results. Most variation in testing occurs before the test is
performed as sample preparation plays a major role in final results. These machines are convenient for preparing samples as
they ensure uniform process and save time.
been found homogeneous enough to be spun into fibers over the entire range of composition. Since mixing may be independently adjusted, agglomerates of additives, such as fillers or pigments, may be accurately controlled.
Friction, Adhesive, Tearing Testers
Coefficient of Friction Tester - COF Tester - Peel Tester
www.WorldofTest.com/coefficient-friction-tester-cof-tester
Qualitest covers a complete and competitive range of Coefficient of Friction Testers for plastic films, sheets,
rubber, paper and paper board, PP woven bags, fabrics, metal-plastic composite belts for communication
cables, convey belts, wood, coatings, brake pads, windshield wipers, shoe materials, tyres, and other materials.
Specimen Dies & Clicker Presses
www.WorldofTest.com/specimen-dies-molds
Specimen Cutting Dies
Fully Certified ASTM, DIN and ISO dies.
High quality range of specimen cutting dies and sample cutter are made exactly according to the specific ASTM, DIN,
ISO, or JIS standards and are highly accurate for perfect preparation of your test specimens. All of these specimen
cutting dies come in a padded carrying case and are supplied with full certification. Qualitest also offers re-sharpening
service for these specimen dies and maintain highest quality of production and standards.
Each of our cutters comes with a fully detailed "Inspection Report" and a "Certificate of Compliance" to NIST/SCC and
the ISO Guide #25.
ASTM Standard Cutting Dies
Adhesive Tape - Roller Pressing Machine
ASTM D-412 A Tensile Sample Cutting Die
ASTM D-1708 Micro tensile Die
www.WorldofTest.com/adhesive-tape-ink-transfer-testing
ASTM D-412 B Tensile Sample Cutting Die
ASTM D-624 B Tear Sample Cutting Die
JIS C2107, JIS Z0237
This instrument is used to applying a layer of ink from adhesive tape to test sample by pressing the test sample
and printed adhesive tape together, this operation is conducted under controlled condition with controlled load,
rolling speed, rolling time, etc. Which then is separate by Disk Peeling tester to determine the optimum conditions for transferring ink from adhesive tape to sample material.
ASTM D-412 C Tensile Sample Cutting Die
ASTM D-624 B Tear Sample Cutting Die with Slit
ASTM D-412 D Tensile Sample Cutting Die
ASTM D-624 C Tear Sample Cutting Die
ASTM D-412 F Tensile Sample Cutting Die
ASTM D-624 T Tear Sample Cutting Die
ASTM D-638 Type I Tensile Die
ASTM D-1004
ASTM D-638 Type II Tensile Die
ASTM D-1922
ASTM D-638 Type III Tensile Die
ASTM D-746
ASTM D-638 Type IV Tensile Die
ASTM D-746 T50
www.WorldofTest.com/adhesive-tape-ink-transfer-testing
ASTM D-638 Type V Tensile Die
ASTM D-1938
After the Printed adhesive tape is bonded with sample using Adhesive Tape Roller Pressing Machine, this instrument is used to strips off the adhesive tape from test sample using Disk Peeling Tester with controlled force and
speed allowing transfer of ink from adhesive tape to sample. Then the sample and adhesive tape is observed for
the status of ink layer stripped of to determine the ink fastness properties and bonding strength to determine the
optimum conditions for transferring ink to a sample material.
ASTM D-1822-S
Other ASTM Dies Available Upon Request
Adhesive Tape - Disk Peeling Tester
Gel Timer
www.WorldofTest.com/gel-timer
These gel timers are perfect for determining the gel time of resinous plastics, adhesives, crying oils, two component
elastomers, and paints. A low torque, synchronous motor rotates a specially shaped stirrer in the catalyzed resin or
elastomer. As gelation occurs, drag exceeds torque and the motor stalls. This signals an electronic circuit which stops
the clock and activates a flashing lamp. The gel time will show on the LCD display.
JIS Standard
DIN Standard
Miscellaneous
Accessories
JIS K -6301 1
DIN 53504 S1
ISO 34 A
Mallet Handles & Backplate
JIS K -6301 2
DIN 53504 S2
ISO 34 B
Shanks
JIS K -6301 3
DIN 53504 S3
ISO 37, Type 1 through 4
Adaptors
JIS K -6301 4
DIN 53504 S3A
ISO/DIS 3167
Backplate
JIS K -6301 A
.250 x 5.0
Rubber Filled
JIS K -6301 B
.500 x 5.0
Naef adaptor
17
14
ADVANCED
TESTING
ADVANCED
TECHNOLOGIES
TESTING
TECHNOLOGIES
Sample Specimen Preparation Equipment
Film Permeability Tester
SpeciCut II-P
Digital Elmendorf Tearing Tester – QT-DET
www.WorldofTest.com/sample-preparation-machine-specicut-ii-p
www.WorldofTest.com/elmendorf-tear-strength-tester
Hard Plastic Tensile Specimen Cutting Machine
The Sample Preparation Machine - SpeciCut II-P is a manually operated, economical way to prepare tensile
bars and other samples. The Sample Preparation Machine - SpeciCut II-P is an enclosed machine which
includes integral misting, chip removal and motor speed regulation units. The chip shield around the control
head protects the area around the unit from debris, while the sound deadening package absorbs much of the
noise of the unit. A series of power switches located on the front of the panel enables the operator to easily
access those accessories desired, while the emergency stop switch located on the machine cuts power to all
systems simultaneously.
ASTM D1922, ASTM D1424, ASTM D689, ISO 13937-1, ISO 6383, ISO 1974, GB/T16578.2-2009, GB/T
455, TAPPI T414
QT-DET Digital Elmendorf Tearing Tester takes the Elmendorf method and is used to determinate tearing
resistance property of films, sheets, flexible PVC, PVDC, waterproof films, woven materials, polypropylene,
polyester, paper, cardboard, textile and non-woven, etc.
Film Permeability Tester
www.WorldofTest.com/film-permeability-tester
SpeciCut III
www.WorldofTest.com/cnc-sample-preparation-machine-specicut-iii
The SpeciCut III CNC sample preparation machine is cost effective in motion control application of up to 3 axes.
The motion control is based on numerical control Technology. The machine adopts a simple connectivity and a
single commercially available USB cable is used for communication between the PC and control board which
can be placed as per user preference.
SpeciCut IV
Gas Permeability Tester - QT-GPT
www.WorldofTest.com/gas-permeability-tester-qt-gpt
ASTM D1434, ISO 15105-1, ISO 2556, JIS K7126-A
Gas Permeability Tester- QT-GPT-500 is used to test the gas transmission rate (GTR) of packaging material by differential pressure method.
This instrument is generally used to measure transmission rate of Oxygen (O2), Nitrogen (N2), Carbon
dioxide (CO2), and other Non-inflammable and non-etchant gases through and packaging container so
as to ensure the quality of material inside package is maintained as required.
www.WorldofTest.com/cnc-sample-preparation-machine-specicut-iv
Oxygen Permeability Tester - QT-OPT-201
The CNC Sample Preparation Machine - SpeciCut IV - Flat Samples is a PC controlled system capable of
controlling all 4 axes. The motion control is based on numerical control Technology. The machine adopts a
simple connectivity and a single commercially available USB cable is used for communication between the PC
and control board which can be placed as per user preference.
www.WorldofTest.com/oxygen-transmission-rate-tester
SpeciLathe I
www.WorldofTest.com/cnc-sample-preparation-machine-specilathe-i
The Mini NC Lathe - SpeciLathe I is a Compact NC Lathe for various metals and non-metals. The motion
control is based on numerical control Technology, which is programmable for a range of specimens. The
Turret head and the tail stock features in the lathe enable to operate the machine for various purposes and the
Spindle speed can be reached at 4000 rpm. The in-build cover prevents the operator from Dust and noise.
SpeciLathe II
www.WorldofTest.com/mini-nc-lathe-specilathe-ii
The Mini NC Lathe - SpeciLathe II is used for Sample preparation from various metals and non-metals. The
motion control is based on numerical control Technology, which is programmable for a range of specimens.
It employs an integral microcomputer to prepare those specimens which we have programmed in accordance
with the customer’s requirements. The Turret head and the tail stock features in the lathe enable to operate
the machine for various purposes. The in-build cover prevents the operator from dust and noise.
ASTM D3985, ASTM F2622, ASTM F1307, ASTM F1927, ISO 15105-2, DIN 53380-3, JIS K7126-B
Oxygen Permeability Tester - QT-OPT-201 is ideal for industrial application laboratory testing of material
for Oxygen permeability testing for quality control, research and development on plastic, metal, paper
and rubber materials that are generally used as packaging materials for storage, preservation or transportation of perishable and oxidizable materials.
It can also be used for research laboratories to evaluate and define permeability behaviour of material.
Oxygen Permeability Tester - QT-OPT-210
www.WorldofTest.com/oxygen-permeability-tester-qt-opt-210
ASTM D3985, ASTM F1927, ASTM F1307, ASTM F2622, ISO 15105-2, DIN 53380-3, JIS K7126-B
Oxygen Permeability Tester - QT-OPT-210 is ideal for advanced Oxygen permeability testing for quality
control, research and development on plastic, metal, paper and rubber materials that are generally used
as packaging materials for storage, preservation or transportation of perishable and oxidizable materials.
It is used for research laboratories to evaluate and define oxygen permeability behaviour of material.
The built in software performs complicated data analysis and displays the relations in the form of graphs
and data tables which significantly reduces the time to determine the permeability rate and relations
between different output parameters of a variety of test subjects.
It is fully equipped with high level of accuracy and precision with reliable data output required for research
analysis and Quality Control testing.
18
13
ADVANCED
TESTING
ADVANCED
TECHNOLOGIES
TESTING
TECHNOLOGIES
Film Thickness Gauges
Brittleness & Freezing Testers
Water Vapor Permeability Tester - QT-WVP
Brittleness Temperature Tester QT-BPT
www.WorldofTest.com/water-vapor-permeability-tester-qt-wvp
www.WorldofTest.com/brittleness-temperature-tester-qt-bpt
ASTM E96, ASTM D1653, ISO 2528, DIN 53122-1, TAPPI T464, JIS Z0208
Water Vapor Permeability Tester QT-WVP-300 series is used to test the water vapor transmission rate (WVTR)
of a wide range of materials by Gravimetric Method. It is ideal for advanced water vapor permeability testing for
research and development companies and has the reliability, speed, versatility and accuracy required for Quality
Control testing.
Special feature of its 12 chamber adoptability for independent as well as average testing of similar or different
samples allow flexibility to user for expansion considering the number of testing chambers without purchasing a whole set of new instrument. User
can perform average testing of similar samples as well as independent testing simultaneously.
Wide range of testing can be adopted by additional external fittings for packaging container, bags, pouch, bottle, can, bowl, aluminum coated
containers, and many other packaging containers.
ASTM D746, JIS-K 7216, ISO 812, and GB/T 15256
The Brittleness Point Temperature Tester - QT-BPT Series Brittleness Tester covers the determination of the temperature at
which rubber, plastics and elastomers exhibit brittle failure under specified impact conditions. Samples to be housed in a
thermostatic bath based on the reference standards ASTM D746, ISO 812, as well as and other international standards.
Water Vapor Permeability Tester – QT-WVP-200
www.WorldofTest.com/water-vapor-transmission-rate-tester
Water Vapor Permeability Tester QT-WVP-200 series is used to test the water vapor transmission rate (WVTR)
of a wide range of materials by Electrolytic Method. It is ideal for advanced water vapor permeability testing for
research and development companies and has the reliability, speed, versatility and accuracy required for Quality
Control testing.
It uses state of the art automation technology to delivers accurate performance with faster test results. Its user
friendly interface enables a new user to adapt easily.
Qualitest offers the highest quality Electrolytic detection sensor in the market with the lowest replacement cost.
The built in software performs complicated data analysis and displays the relations in the form of graphs and
data tables which significantly reduces the time to determine the permeability rate and relations between affecting parameters with variety of test subjects.
Film Thickness Gauges
Film Thickness Tester - MX-Series
Brittleness Tester - ET 05 II
www.WorldofTest.com/brittleness-tester-et-05-ii
ASTM D746, ASTM D2137, ISO 812, ISO 974
It is used for the automatic determination of Brittleness point according to ISO 812, ISO 974, ASTM D746 and ASTM D2137.
The price includes the instrument and software, but not the computer.
The test rig is raised by pneumatic cylinders, which require an air supply of 6 Bar. The brittleness tester is designed as a
falling weight tester, where the speed is set by the height and the energy by the attached weights. The computer controls
the temperature rise and measures the temperature at impact. The result from each stroke is entered by typing the result in
the software. The speed is measured after the impact, to verify the speed loss during impact.
Freezing Tester
www.WorldofTest.com/freezing-tester
Our Freezing Tester units are available in vertical or horizontal configurations are used to test the bending/flexing durability
of rubber, plastics, synthetic leather, shoes, etc., under cold temperatures as low as -30°C or -70°C depending on the
selected model. The test chambers can be equipped with a variety of flexing/bending fixtures made of stainless steel.
These models conform to ASTM D 1790, and ASTM D1593 standards.
Apparent / Bulk Density Tester
www.WorldofTest.com/mx-series-film-thickness-tester
In the past, film and paper producers and converters have had the choice of caliper gauges which were either
value-priced thickness-only machines, or expensive computer-operated machines. Now you can have the best
of both worlds in a single instrument. The MX-series Micro Gauges are simple to operate, stand-alone or PC-operated testers with optional Quality Control software for automatic calculation and graphical display of thickness
profiles, statistics, and other information.
www.WorldofTest.com/apparent-bulk-density-tester
The Apparent Density Tester - Bulk Density Tester series testers are used to measure apparent density, bulk factor,
and where applicable, the pourability of plastic materials such as molding powders. There are three methods according
to ASTM D 1895 that are applicable to various forms of these materials that are commonly encountered - from
powders and granules to large flakes and cut fibers. The apparatus consists of a measuring cup which is polished
inside and a funnel.
High Precision Electronic Thickness Meter - QT-ETM
www.WorldofTest.com/high-precision-electronic-thickness-meter
ISO 4593, ISO 534, ISO 3034, ASTM D645, ASTM F 2251, ASTM D374, ASTM D1777, TAPPI T411, DIN
53105, DIN 53353, JIS K6250, JIS K6328, JIS K6783, JIS Z1702, BS 3983, BS 4817
QT-ETM is a simple to use stand-alone and/or computer operated thickness tester, with optional Quality Control
software for automatic calculation and graphical display of thickness profiles, statistics, and other information.
QT-ETM is best suitable instrument to perform thickness measurement or comparative measurement analysis
of thin films of thickness 0 to 1.5mm with high accuracy of ±0.1µm.
19
12
ADVANCED
TESTING
ADVANCED
TECHNOLOGIES
TESTING
TECHNOLOGIES
Specific Gravity Tester – Densimeter
Film Thickness Gauges
Ball Rebound Tester for Foam Materials
Thickness Tester - CX-Series
www.WorldofTest.com/ball-rebound-tester
www.WorldofTest.com/thickness-tester-cx-series
The microcomputer controlled ball-rebound-tester is designed for the determination of the rebound elasticity of
foam materials acc. to ASTM D 3574 and DIN EN ISO 8307.
A quick, easy and reliable measurement can be done with the ball-rebound-tester because of its innovative
technique. This top quality unit is ideal for the quality control of foam materials during the production and in the
acceptance department.
A two lined display reads the measured value and median value in %. The testing device is equipped with a
serial interface.
The Thickness Tester - CX-1020 revolutionized capacitance film thickness gauging with the introduction of
our patented AutoCal™ concept - by adding an absolute (contact) measurement probe with the capacitance
sensor, the Thickness Tester - CX-1020 is self-calibrating. No more need to create detailed recipes to recall
calibration information. Accidental operator errors are reduced, accuracy is increased, because different
polymers and blends require different calibration values.
Thickness Tester - Model 543
www.WorldofTest.com/thickness-tester-model-543
Specific Gravity Tester – Densimeter
Digital indicator and stand provides a convenient, cost-effective way to perform plant floor or laboratory spot
checks of film and sheet thickness. Also ideal for tensile test sample thickness measurement. Resolution to
50 millionths of an inch with accuracy to 120 micro inches. Glass scale technology is rugged and reliable. Can
be connected to SPC software for statistical and graphical data analysis (option).
www.WorldofTest.com/specific-gravity-tester-densimeter
Densimeter - EW-300SG
www.WorldofTest.com/densimeter-ew-300sg
• Only 10 seconds to measure density and volume.
• Ideal machine for interval testing in a production line.
Thickness Gauge EV 01
Densimeter - MD-300S
www.WorldofTest.com/thickness-gauge-ev-01
www.WorldofTest.com/densimeter-md-300s
• Popular model with resolution of 0.001g/cm3. (Upgraded from previous model MD-200S)
• Compact body and accurate density measurement for solid and liquid samples.
Densimeter - SD-200L
www.WorldofTest.com/densimeter-sd-200l
• Top precision model with density resolution of 4 decimal places for both Solid and Liquid.
• Suitable for plastic pellets, films, rubbers , fabric, advanced materials, and liquid density in the field of medical,
food, and chemical that require accuracy.
EV 01 Thickness gauge series are special thickness gauges, with the possibility of many different applications, measuring foot and table.
It can be used for computerized compression set testing according to ISO 815 and thickness measurement
according to ISO 23529 for rubber or ISO 5084 for textiles and consists of the following parts:
• Digital Gauge modified for correct measuring pressure for rubber, plastic or textile testing, including 10 mm
gauge block, lifting cable, measuring foot and weight for thickness measurements.
• Stand, of stable construction, with the possibility of fine adjustments of the height.
• Interface Kit, EV 01.04 for PC-Computer, including cables and foot pedal. (Optional)
• Software EC 02 for thickness measurements and Compression Set for PC-Computers.
Densimeter - MDS-300
www.WorldofTest.com/densimeter-mds-300
• Easy density measurement of not only solid and liquid sample density, but added functionality to measure
powder density with resolution of 0.001g/cm3 and reference value of 0.0001g/cm3.
• Newly designed sensor and auto-weighing function for improved accuracy and working efficiency.
Densimeter - MDS-3000
www.WorldofTest.com/densimeter-mds-3000
• Measuring capacity up to 3kg
• Wide measuring capacity enables to measure the samples without cutting, and calculates an average density for
the whole sample.
• Sensor & water tank size can be customized depending on the sample size.
• Easy and convenient "auto-weighing function" as a standard feature.
11
20
ADVANCED
TESTING
ADVANCED
TECHNOLOGIES
TESTING
TECHNOLOGIES
More Film Testing Instruments
Drop Impact Testers
Minimum Film Formation Temperature Tester
Buckling Resistance Tester for Thermoplastic Drainage Cover
www.WorldofTest.com/minimum-film-formation-temperature-tester
www.WorldofTest.com/buckling-resistance-tester-thermoplastic-drainage-cover
DIN 53787 - DIN 53 366 – ASTM D 2354 - ASTM D 1465 – ISO 2115 - ISO/DIS 4622
Test instrument with a ground hard-chrome plated metal plate as a measuring plate for depositing the
specimens. By heating and cooling the measuring plate any variable temperature gradient within the range of
-30°C to +250°C can be produced and kept constant for any given period.
BS EN 14830:2006, BS EN 13598-2:2009
Buckling Resistance Tester is used to simulate the conditions when manhole is buried underground and for checking
its resistance to the force from underground water.
Film Heat Shrink Tester
Drop Impact Testers
www.WorldofTest.com/film-heat-shrink-tester-fhst-140
ASTM D2732
QT-FHST-140 is designed to evaluate the heat shrinking property of plastic materials and films. The application
of heat causes plastic films to rapidly contract; this effect can be used for sealing and packaging application.
This instrument is used for determination of heat shrinking performance and dimensional stability of various
plastic films, tubes, hard PVC films for tablets, and packaging sheets.
Heat Seal Tester - QT-HST-E
Drop Weight Impact Tester for Plastic Pipes
www.WorldofTest.com/drop-weight-impact-tester
300C (ISO 3127, EN744, EN1411) & 300D (ASTM D2444)
The Falling Weight Impact Tester is used to perform impact tests on plastic pipes, conforming to ISO 3127, EN744 and
EN1411. Test pieces are subjected to blows from a falling striker, of specified mass and shape, dropped from a known
height onto specified positions around the circumference of the test piece. The true impact rate of the batch, or production run from an extruder, is estimated.
www.WorldofTest.com/heat-seal-tester-qt-hst-e
ASTM F 2029
Qualitest QT-HST-E is heat seal testing equipment specially designed to simulate heat sealing condition and
affecting parameters for determination of heat sealing ability of plastic films, composite films, coated paper, and
other sealing films under specified sealing conditions.
Hot Tack Tester - QT-HTT
Gardner Impact Tester
www.WorldofTest.com/gardner-impact-tester
ASTM D 2794, D 5420, D 3029, D 4226 and G14
Qualitest offers extensive range of advanced plastics and color testing equipment such as Gardner Impact Tester which
is a widely used device for the coating and plastic industries.
www.WorldofTest.com/hot-tack-tester-qt-htt
ASTM F1921, ASTM F2029
QT-HTT Hot Tack Tester is used to test adhesive or peeling strength of packaging films used for heat seal
packaging material.
This device is compatible to test the different types of thermoplastic films sealing at different temperature,
pressure and at controlled speed to evaluate different application criteria for packaging materials considering the
environmental conditions for actual application.
Hot tack tester measures the strength of heat seals formed between thermoplastic surfaces of flexible webs,
immediately after the seal has been made and before it cools to room temperature. It simulates packaging and
sealing environment and enables to analyse its effects on seals.
Drop Dart Impact Tester for Plastics Film
www.WorldofTest.com/drop-dart-impact-tester-plastics-film
Drop Dart Impact Tester - ASTM D1709
Series DX-8000 Dart Impact testers Full-Featured models for Film and Sheet
The Model DX-8285A Drop Dart Impact tester with Pneumatic Sample Clamp and Pneumatic Dart release Mechanism
We offer the Series DX-8000, a simple to use stand-alone, non-instrumented tester, for measuring impact resistance of
film, sheet, and laminated materials.
Falling Dart Impact Tester - QT-FDIT
www.WorldofTest.com/falling-dart-impact-tester-qt-fdit
ASTM D1709, ISO 7765-1, JIS K7124
It is important to understand the impact resistance of packaging materials for since it will be subjected to impacts during
transportation and loading. It is widely used in R&D departments, laboratories, packaging industries, inspection agencies,
and film manufacturing units etc. to determine the maximum energy that their products can withstand without failure.
QT-FDIT determines the energy required for plastic films and foils to fail under the impact of a free falling dart under specific
conditions. This energy is expressed in terms of the weight of the dart falling from a specified height which would result in
50% failure of specimens tested.
21
10
ADVANCED
TESTING
ADVANCED
TECHNOLOGIES
TESTING
TECHNOLOGIES
Plastics Pipe / PVC Testing Instruments
Color Testing Instruments
Light Booths
Hydrostatic Pressure Tester
www.WorldofTest.com/light-booths-visual-color-control
www.WorldofTest.com/hydrostatic-pressure-tester
ASTM D-1598, ASTM D-1599, ISO 1167
Conforming to ISO 1167 and ASTM D 1598 & 1599, the Hydrostatic Pressure testing system is mainly used
to determine the resistance of thermoplastics pipes to constant internal water pressure at constant
temperature.
This system is mainly used in testing the short-time hydraulic failure and resistance to constant internal
pressure of the plastic pipes for the transport of fluids. The test stations work fully independently of one
another, according to your testing application.
Thermal Recycling Testers
www.WorldofTest.com/thermal-recycling-testers
ASTM F1335, ISO 15874, ISO15875, ISO 15876, ISO 15877
The Thermal Recycling Testers for Plastic Pipes is used to evaluate the function of hot and cold
water-pipes PP,PE-X, PVC-C, PB), under a certain pressure for 5000 cycles. A test assembly of pipes
and fittings is subjected to temperature cycling by the passage of water under pressure using hot and
cold water alternately for a specified number of cycles. While being subjected to temperature cycling parts of the assembly of pipes and fittings
are maintained under tensile stress and/or flexural strain by the use of static clamps.
Pipe Cutting and Chamfering Machine
www.WorldofTest.com/pipe-cutting-and-chamfering-machine
The Pipe Cutting and Chamfering Machine is used for cutting and chamfering big pipes. It is an ideal
machine for pipe manufacturers as well as quality inspections and research institutions.
Colors appear differently under different lighting conditions. Use of a light booth to simulate different lighting conditions helps to obtain objective
color assessment, improves communication and reduces product rejections. We offer a complete line of light booths which allow you to see what
your product will look like – independent of location and environmental influences.
Light Booth - Spectra
For critical color evaluation the byko-spectra light booth offers every option and feature that is needed to
evaluate and communicate color with absolute confidence.
• Comparison of standard and sample in a color-neutral environment
• Five different controlled light sources
• Viewing under ultraviolet light to detect and evaluate optical brighteners or fluorescent pigments
• No warm-up time or flickering which ensures quick and reliable color judgment.
• Automatic light source sequencing to standardize testing procedures
• Color Guard II timing center tracks light source usage and indicates when to replace the lamps
Light Booth - Spectra Basic
For general color evaluation under defined lighting conditions
• Comparison of standard and sample in a color-neutral environment
• Three different controlled light sources: Daylight D65, Incandescent light A, Department store light CWF or
TL84
• Easy to operate by using individual switches for each light source
• Can be set up in minutes without any tools
• Economical testing of large samples in a compact design – for laboratory and production
Light Booth - Spectra Effect
Pipe Opacity Tester
www.WorldofTest.com/pipe-opacity-tester
ISO 7686:2005
The Pipe Opacity Tester is used to determine the opacity of pipes and fittings. It is an ideal device for pipe manufacturers,
research and inspection institutions. It consists of optical source, Luminous flux collection system, and automatic specimen going in/out controlling system, specimen automatic moving device and specimen support.
For objective evaluation of color under different viewing angles, and flake characterization under different
illumination conditions
Color evaluation for daylight under 6 defined viewing angles: A tiltable sample table allows the samples to be
presented at the following angles: -15°/15°/25°/45°/75°/110°. The illumination system also pivots, insuring
excellent agreement with the measurement results of multi-angle color instruments.
Light Booth - Spectra Mini
Ring Stiffness Tester
www.WorldofTest.com/ring-stiffness-tester
ISO 9969-2007, ISO9967
The Ring Stiffness Tester RST30 is designed to measure the ring stiffness, ring softness and creep rate for plastic pipe.
The unique design makes this tester especially suitable for large diameter pipe. The RST30 features built in measurement of the inner diameter of the pipe and the compression plate load-cell interface is designed to reduce the risk of
damaging the load cell during testing. The rigid compression plates ensure the results will be free of machine deflection
and increases the accuracy of the test results.
For general color evaluation of small samples
• Comparison of standard and sample in a color-neutral environment
• Three different controlled light sources: Daylight D65, Incandescent light A, Department store light CWF or
TL84
• Easy to operate by using individual switches for each light source
• Can be set up in minutes without any tools
9
22
ADVANCED
ADVANCED
TESTING
10
TECHNOLOGIES
TESTING
TECHNOLOGIES
Color Testing Instruments
Charpy / Izod Pendulum Impact Testers
Portable Spectrophotometers - Color Meters
High Performance Charpy / Izod Impact Tester Q-Impact 50
www.WorldofTest.com/portable-spectrophotometers-color-meters
www.WorldofTest.com/high-performance-charpy-izod-impact-tester-q-impact-50
Qualitest offers extensive range of advanced plastics and Color testing equipment such as Portable Spectrophotometer – Spectro-Guide & Color-Guide which is used for total Appearance Control - color and gloss in
one unit.
Mobile Color Measurement. Store up to 200 standards with tolerances and 999 samples in the color-guide's
memory and control color whenever and wherever it is needed.
ISO 179, ISO 180, ASTM D256
The Q-Impact 50 High Performance Charpy/ Izod Impact Tester is a high performance impact tester
designed to precisely determine the absorbed impact energy and resistance to breakage of plastic specimens. The tester conforms to both ASTM and ISO standards. The innovative design allows this tester to be
used for both Izod and Charpy test. The max capacity of this tester is 22J (Izod) and 50J (Charpy)
Micro-Gloss 20, 60, 85, 45, 75 & TRI
Digital Charpy/Izod Impact Tester - Q-Impact 25
www.WorldofTest.com/gloss-meters
The micro-gloss has been the unsurpassed industry standard in gloss measurement for many years. It is the
only gloss meter combining highest accuracy, ease-of-use and multiple functionality – essential for today`s
testing requirements
QualiGloss Series Gloss Meter
www.WorldofTest.com/qualigloss-series-gloss-meter
A gloss meter is an instrument which is used to measure gloss of materials such as the wood floor, paint,
plastics and paper. Gloss is a measure of the proportion of light that has a specular reflection from the surface.
A surface such as a mirror has a high gloss, where a surface such as chalk has less because the light reflected
is diffused. Numerous international technical standards define the method of use and specifications of different
types of gloss meter used on different types of materials. Some of these materials include ceramics, paper,
metals, and plastics. A major user of gloss meters is in the auto industry. The uses for automobiles extend from
the factory floor to the repair shop.
Orange Peel / DOI Meter - Wave Scan
www.WorldofTest.com/orange-peel-doi-meter-wave-scan
Appearance control is no longer limited to final topcoat inspection. The orange peel meter scans the optical
profile of high gloss surfaces using a laser light source. An additional, infrared –high energy LED allows
measuring the same structure spectrum (0.1 – 30 mm) on medium gloss surfaces. The dullness measurement is recorded with state-of-the-art CCD camera technology. It gives information on the image forming
qualities of the surface caused by structures < 0.1mm.
Universal Paint Inspection Gauge
www.WorldofTest.com/universal-paint-inspection-gauge
The byko-cut universal is a multi-purpose paint testing instrument that measures paint coating thickness,
paint adhesion, and coating hardness.
• Can measure coating thickness on metal, wood, plastic, and other rigid substrates
• Multi-layer coating thickness can be measured
• Built-in microscope can also be used for assessing paint imperfections
www.WorldofTest.com/q-impact-25-digital-charpyizod-impact-tester
ASTM D-256, ASTM D-6110, ISO 179, ISO 180
Q-Impact 25 is a high performance impact tester designed to precisely determine the absorbed impact energy
and resistance to breakage of plastic specimens. The tester conforms to both ASTM and ISO standards. The
instrument is capable of recognizing the height loss of swinging pendulum accurately and quickly determine
the impact strength via a high precision digital encoder and calculating system. In combination with automation features, the Q-Impact 25 applies pendulum auto- braking, pendulum auto-lifting and pendulum
auto-identification to ensure the operator`s safety and increase the working efficiency of impact test.
Analog Izod / Charpy Impact Tester - QPI-IC
www.WorldofTest.com/analog-izod-charpy-impact-tester-qpi-ic
ASTM D256 - ISO 180
The QPI-IC Basic Izod Impact Tester determines the energy required to break standard plastics impact specimens.
Meeting the corresponding ASTM, & ISO test methods, this equipment is equipped with both Izod and Charpy Vise
and made according their respective standards. Users can read the endurance of impact strength directly from the
scale.
Impact Specimen V-Notcher QuickNotch-II
www.WorldofTest.com/impact-specimen-v-notcher-quicknotch-ii
ASTM D256
The Notcher for Impact Test Specimen machine can cut various depths for V shapes according to standards. To
produce IZOD and CHARPY specimens, the user will cut a V angle along the middle of the specimen to decrease the
diversity. The cutting speed of the Notcher for Impact Test Specimens machine can be adjusted according to the
material of the specimen, as well as, to different angle depths, where the user can adjust or change the shape of the
cutting tool to produce different angle cuts.
Film Impact Tester - QT-FIT-3J
www.WorldofTest.com/film-impact-tester-qt-fit-3j
ASTM D3420
The impact resistance of films is obtained by measuring the energy consumed by hemispheric impact head to make
films rupture under controlled impact conditions to evaluate the impact resistance of material and its effects.
8
23
ADVANCED
TESTING
ADVANCED
TECHNOLOGIES
TESTING
TECHNOLOGIES
Durometers: Shore & IRHD Hardness Testers
Color Testing Instruments
Portable Models
HPE II - Digital Barcol Hardness Tester
Automatic Film Applicators
www.WorldofTest.com/barcol-hardness-tester-impressor
www.WorldofTest.com/automatic-film-applicators
According to ASTM D 2583 and DIN EN 59
Qualitest’s Analog and Digital models are designed for accurate hardness measurement on fiber-glass glass-reinforced plastics, duro plastics, hard thermo plastics, aluminum, semi-finished and finished products, according to the
Barcol method. Available models include GYZJ series Analog Barcol Impressor Hardness Tester as well as HPE-II
series Digital Barcol Hardness Testers.
Automatic Motorized Durometer - Digi-Test II
The Byko-drive Automatic Applicator is an economical film applicator that improves the consistency of drawdowns. When more than one operator is drawing down the same coating or ink, the dry film appearance will
vary because of different drawdown techniques. Drawdown speed and pressure on the applicator tool will
impact the result. Film thickness, gloss, opacity, and color can vary with differing drawdown techniques. The
byko-drive is available with a vacuum plate or glass plate with clamp. Applicator bars, U-shaped bars,
applicator frames, film casting knifes, and wire-wound rods are acceptable applicators. The byko-drive has a
compact design consisting of a light-weight aluminum chassis and impact resistant thermo-plastic cover.
Viscometer
www.WorldofTest.com/automatic-motorized-durometer
www.WorldofTest.com/viscometer
The most accurate and versatile hardness tester on the market, DigiTest positions itself as the top level
Shore/IRHD hardness tester with a modular design to suit virtually every Shore or IRHD hardness measurement scale for Polymers. The automatic test procedure of DigiTest eliminates the operator’s test influence on
test procedure and thus always provides the most accurate results.
Depending on the hardness scales of your choice, from any of Shore scales A, A0, B, 0, C, D, D0, 00, 000,
000 S, E, micro Shore A, micro Shore D, C, D0, IRHD/DIDC M, N, H, L, VLRH, you can select the most cost
effective combination of required test heads, and expand and upgrade it at any time in the future.
The versatility of the CAP 1000+ and CAP 2000+ Viscometer makes these instruments a practical tool for any
QC or R&D lab requiring quick and easy testing of materials, regardless of application, at high shear rates.
• Provides for viscosity measurements at high shear rates
• LCD display of viscosity in Poise or Pascal-seconds
• Uses less than 2 ml of sample to avoid excess cleaning and material costs
• Automatic viscosity range calibration and cone gap positioning make the viscometer easy to use
IRHD Micro Hardness Tester III
Rotational Viscometers
www.WorldofTest.com/irhd-micro-hardness-tester-iii
www.WorldofTest.com/viscometer
The IRHD Micro Hardness Tester III - New Generation - 3rd series of this popular IRHD Hardness Tester line has a
more convenient and user-friendly operation. Accurate IRHD Micro hardness measurement of soft elastomers such
as O-rings, seals and gaskets, with thickness down to 0.6mm, is guaranteed.
IRHD Micro Hardness Tester III - New Generation offers new advantages, with an excellent price/quality ratio. Testing
of O-rings, molder samples with irregular shapes, seals, etc. are ideal applications for this model. A quick center lever
allows quick and precise positioning of the samples and the measuring head comes with integrated display and
keypad for ease of use. IRHD Micro Compact III comes with standard RS-232 data interface as well as exchangeable
indenters.
To measure the absolute viscosity a rotational viscometer is used. For non-Newtonian liquids a digital
viscometer that applies a precise shear rate is needed. For laboratory viscosity measurement, we offers a
comprehensive line of rotational viscometers. The viscometer product line can measure viscosity from a near
water-like viscosity to a very high viscosity range for epoxy, sealants, and paste. To measure viscosity under
a high shear rate Cone and Plate viscometers are available. The easy to use digital Stormer viscometer is also
part of the rotational viscometer family.
Transparency Meter - Haze Gard-i
www.WorldofTest.com/transparency-meter-haze-gard-i
Transparent products can have a milky or fuzzy appearance dependent on their light scattering
behavior. The haze-gard i quantifies the visual perception with objective measurement criteria:
• Total transmittance
• Transmission haze
• Clarity
Gradient Oven
www.WorldofTest.com/gradient-oven
The Gradient Oven is a test apparatus for evaluating the baking and drying behavior of liquid coatings, powder
coatings, resins, plastics, etc. A production baking process can be simulated by programming heat-up speed,
baking temperature and time.
• Saves time and energy
• Generates various curing temperatures on one panel
• Simulates the temperature profile of a production oven in the laboratory
7
24
ADVANCED
TESTING
ADVANCED
TECHNOLOGIES
TESTING
TECHNOLOGIES
Block Oven / Aging Oven
Durometer - Shore Hardness Testers
Analog Durometer HP-Series
www.WorldofTest.com/block-oven-aging-oven
www.WorldofTest.com/analog-durometer
Cabinet Ageing Oven - EB Series
www.WorldofTest.com/cabinet-ageing-oven-eb-series
Cabinet Aging ovens for precision ageing of rubbers and plastics under controlled conditions. EB 04-II and
EB 10-II are shelf ovens and conform to ISO 188, ISO 3383, IEC 811 and technical equivalent standards.
They designed to give very low temperature variations in time and space, low air speed and controlled air
exchange rate. This is achieved by using an inner chamber with a controlled air flow.
Cabinet Ovens are ideal for ageing finished products and large test pieces which are unsuitable for cell
ovens. Both shelves and rods are supplied with the oven for accommodating most types of samples. The
settings are done on the colour touch PLC screen.
Our range of Shore Durometer - HP Series Durometers are suitable for accurate hardness measurement of all natural
and synthetic rubber products, plastics, acrylic glass, acetates, casting resin, polyester, thermoplastics, PVC,
neoprenes, hardboards, wood, leather, and fruits within the Shore A, A0, B, 0, C, D, D0, 00, 000, 000S, E, Qualitest
Variant C (Asker C), L/c. These durometers are the highest precision models on the market with very easy handling.
Digital Durometer HPE-II
www.WorldofTest.com/digital-durometer-hpe-ii
High-end Durometers with the highest quality and accuracy on the market.
DIN ISO 7619, DIN EN ISO 868, NF EN ISO 868, ASTM D 2240 (DIN 53505)
Digital Shore Durometer - HPE-II Series Digital Durometers are high-end hardness testers for accurate and repeatable hardness measurement of rubber, plastics and other elastomers within the Shore A, A0, B, 0, C, D, D0, 00, 000,
000S, E, scales and much more. This potable handy instrument is available in the widest range of scales and L/c as
well as Variant C (Asker C), CS, F and BARCOL.
Cell Ageing Oven - EB Series
www.WorldofTest.com/cell-ageing-oven-eb-series
ISO 188 method A, IEC 811 (EB01), ISO 3384 method B (EB01 LTP)
The Cell Ageing Oven - EB Series are designed for Aging tests according ASTM D 865 Rubber-Deterioration by Heating in Air (Test Tube Enclosure). The ovens can also be used for testing in liquids according to
ASTM D 471 Effect of liquids. Cell ovens and cabinet Ageing ovens perform well inside the apparatus
requirements in ISO 188, IEC 811 and other equivalent standards.
Test Tube Ageing Oven - EB Series
Digital Shore Hardness Tester HPE III
www.WorldofTest.com/digital-shore-hardness-tester-hpe-iii
Shore Hardness - Specimen/Environment Temperature - Humidity
DIN ISO 7619, DIN EN ISO 868, ASTM D2240, NF EN ISO 868, JISK 6253
Qualitest offers Digital Hardness Tester HPE III which provides significant test data for the use in laboratory or field.
Companies that develop or use the products made of soft elastic materials produce, have usually a laboratory in
which the products and raw material are regularly tested according to the standard.
www.WorldofTest.com/test-tube-ageing-oven-eb-series
ASTM D865, ASTM D471, ISO 1817 (EB 11-II, EB 28)
The Test Tube Ageing Oven - EB Series are designed for Aging tests according to ASTM D 865
Rubber-Deterioration by Heating in Air (Test Tube Enclosure). The ovens can also be used for testing in
liquids according to ASTM D 471 and ISO 1817 Effect of liquids. Glass tubes for both standards are
included. Glass tubes for air cooling are included and water cooling can be supplied as an option.
Pusey & Jones Hardness Tester – Plastometer
www.WorldofTest.com/pusey-jones-hardness-tester-plastometer
ASTM D 531
Our top quality Pusey & Jones (P&J) hardness tester (Plastometer) serves for the determination of the penetration
depth on rubber and elastomer materials like rubber rollers and standard blocks made of rubber with a minimum
thickness of 13 mm as well as paper rollers.
The electronic dial gauge is integrated in the instrument and shows the indentation depth to an accuracy of 3 decimal
places (0.000 mm). With the help of a vertical spindle which is integrated on the back of instrument, the dial gauge
can be moved up and down conveniently and precisely.
25
6
ADVANCED
TESTING
ADVANCED
TECHNOLOGIES
TESTING
TECHNOLOGIES
Universal Force Test Systems
Low Temperature Tester – Combo
Programmable Motorized Force Test Systems - ESM 303
Low Temperature Tester – Combo
www.WorldofTest.com/programmable-motorized-force-test-systems-esm-303
www.WorldofTest.com/low-temperature-tester-combo
The ESM303 is a highly configurable single-column force tester for tension and compression measurement
applications up to 300 lbF [1.5 kN], with a rugged design suitable for laboratory and production environments.
Sample setup and fine positioning are a breeze with available FollowMeTM force-based positioning - using your
hand as your guide, push and pull on the force gauge or load cell to move the crosshead at a variable rate of
speed.
With generous travel, clearance, and depth dimensions, a wide range of tests can be performed, including break
testing, cycling, limit testing to a load or distance, load holding, elongation testing, tensile testing, compression
testing, and more. Satisfy various test methods through an easy-to-use menu, allowing the configuration of test
speed, force and distance limits, cycling, preload, and many other functions, all protected by a password. Save
up to 50 profiles to accommodate a range of test methods.
When the ESM303’s clearance is insufficient for the application, its modular mechanical design allows for singleand double-column extensions. Modularity extends to the controller functions as well. Individual functions, such
as travel measurement, cycling, load holding, etc., may be purchased either upfront or enabled in the field through
an activation code. This a-la-carte platform allows for custom configuration as appropriate for the application and
budget.
Electronic Tensile Tester - QT-ETT
www.WorldofTest.com/electronic-tensile-tester-qt-ett
ASTM D828, ASTM E4, ASTM D882, ASTM D1938, ASTM D3330, ASTM F88, ASTM F904, ISO 37, JIS P8113
QT-ETT tensile testing equipments are specially designed considering tensile testing requirements for flexible
materials that are commonly used in product packaging to study different properties of materials.
This instrument utilizes Qualitest's latest embedded control system and operating software, with user-friendly
operating interface and intelligent data management system.
Applications
QT-ETT tensile testing equipments can be used to perform different type of tests like traction, stripping, sealing,
tear, compression, bending, and cutting strength of plastic film, composite film, plastic tapes, soft packaging
material, rubber sheets, paper, non-woven fabrics and other packaging materials, widely used in industries
related to production of plastic films, packaging, pharmaceuticals, food, inspection agency, research institutes
etc. to study properties of materials and finished products.
List of basic tests that can be performed using QT-ETT
• Test of Tensile Strength and Elongation Rate
• Test of Tensile Strength at Break
• Tear Resistance Test
• Seal Performance Test
• 90 Degree Peel Test
• 180 Degree Peel Test
• Compression Test of Plastic Bags
• Fastness Performance Test
The TR-Tester, Gehman Tester and Brittleness Tester can be combined using the same base unit and a rig changing system. The combined
instrument consists of a base unit with a cooling bath and the electronics. The three different test rigs are then mounted on a carousel. No lifting
is necessary when switching from one method to another. An automatic computerized Low Temperature Tester increases the precision up to 5
times. The capacity will also increase with about 50 % and not least the labour time will decrease about 75 %.
Gehman Tester
www.WorldofTest.com/gehman-tester
ASTM D1053, ISO 1432
Gehman Tester - ET-02 - Relative Stiffness Characteristics Determination for determination of the relative stiffness
characteristics of vulcanized or thermoplastic rubbers, also called the Gehman procedure. The test is done according
to ISO 1432, ASTM D1053, or technical equivalent standards.
The Gehman Tester - ET-02 - Relative Stiffness Characteristics Determination, has 6 test stations, is computerized
and performs the test automatically.
TR Tester - Low Temperature Retraction Tester
www.WorldofTest.com/tr-tester-low-temperature-retraction-tester
The TR Tester - ET-01 - Low Temperature Retraction Tester is primarily used to determine low temperature characteristics by the temperature retraction procedure according to ISO 2921 and ASTM D-1329.
The TR Tester - ET-01 - Low Temperature Retraction Tester has 6 test stations, is computerized and performs the
test automatically after the cooling media has been cooled down and the samples have been mounted. An automatic
release of the samples is initiated after the pre cooling period has been completed.
The computer controls both the temperature rise and measures the length change of the samples. The results are
displayed in graph and TR10, TR30, TR50 and TR70 values are calculated. The result can also be presented as a
table with length change versus temperature. The TR-values and the table values can be exported to other software
such as spreadsheets.
Low Temperature Compression Set Rig
www.WorldofTest.com/low-temperature-compression-set-rig
Low Temperature Compression Set Rig - EV-09 performs compression set at low temperatures without having to
open the deep-freezer and influence the compression set result has always been a problem.
By using our Low Temperature Compression Set Rig - EV-09 compression rig in combination with a deep-freezer with
a special lid the test can be performed without touching the test piece. All adjustments of height and releasing the
compression are made outside the freezer thus improving the accuracy of the test results.
The Low Temperature Compression Set Rig - EV-09 rig has a digital gauge (0,001 mm), the piston is made of titanium
and the test weight is simply mounted on to the titanium piston. The sample can remain in the test rig for the whole
test period and during the recovery time.
5
26
ADVANCED
TESTING
ADVANCED
TECHNOLOGIES
TESTING
TECHNOLOGIES
Creep & Relaxation Tester
Universal Testing Machines
www.WorldofTest.com/universal-testing-machine
Full Notch Creep Tester - EB-15
Universal Testing Machines - Q-Series
www.WorldofTest.com/full-notch-creep-tester
The Full Notch Creep Tester - EB-15-II-10 for Testing of Plastics Materials is available in different
configurations the creep tester utilizes load cells and servo motors to apply and hold the load rather than the
conventional method of applying dead weights. Apart from eliminating the handling problems associated with
weights this design offers the possibility of running features such as temperature and load ramps controlled by
the computer.
Full Notch Creep Tester - QT-FNCT-6 Series
www.WorldofTest.com/full-notch-creep-tester
ISO 16770 and ISO3501
Full Notch Creep Tester (FNCT) - QT-FNCT-6 Series - For Testing of Plastics Materials is used to determine the
stress cracking resistance of polyethylene materials in any environment. A test specimen in the form of a
square-section bar with coplanar notches in each face at the center is subjected to a static tensile load in a
temperature-controlled environment (ie. air, water, surfactant solution). The geometry of the specimen is such
that plane strain conditions are obtained and brittle failure occurs under appropriate tensile load and temperature conditions. The time for this brittle failure to occur after loading is recorded.
Film Creep Tester EB-24
www.WorldofTest.com/film-creep-tester
Film Creep Tester is based on our Ageing Oven EB 10-II with a digital ruler system including a line laser pointer
for manually measuring the creep.
The ruler is connected to a computer and the values are fed into an Excel template which calculates the result
and presents the graphs.
www.WorldofTest.com/universal-testing-machines-q-series
The Q-Series Universal Testing Machines range is designed for quick and reliable
tensile, compression, flexural (bending), shear, peel, fatigue cycling, and constant load
tests on metals, composites, alloys, rigid plastics and films, elastomers, textiles, paper,
board and finished products.
"The Q-Series" is the Fastest Growing Universal Testing Machine/ UTM Line Worldwide
with Unbeatable Price/ Performance Ratio and an industry first
We offer a comprehensive range of Universal Testing Machines with capacities from
2.5kN (500 lbf) up to 2,000kN (400,000 lbf). The Q-line provides very high value to its
users, as it is designed with advanced technology for easy operation and data retrieval
and manipulation - at a very reasonable price, very efficient and comprehensive support
with Qualitest’s professional after sales service team.
Q-Series Universal Testing Machine Range
Model
Capacity
kN
Capacity
lbf
Bench Models
ESM303
Q2.5
Q5
Q10
Q25
Q50
Q100
1.5
2.5 (1 column)
5
10
25
50
100
300
550
1,100
2,200
5,500
11,000
22,000
Universal Force Test Systems
Automatic Creep & Relaxation Tester
Motorized Force Test System - MT-Series
www.WorldofTest.com/automatic-creep-relaxation-tester
www.WorldofTest.com/motorized-force-test-system-mt-series
ISO 3384 and ISO 899-1
With the Automatic Creep and Stress Relaxation Tester - EB-18-II-3 for Testing of Rubber - tests can be done.
The instrument is based on our triple temperature oven EB 07, which means that each test station can run with
an individual temperature.
The test rigs are based on our relaxation rig EB 02, but lowering and raising of the rigs is motor driven. The
compression or tension of the samples is also motor driven with a servo motor.
The test rigs are built into a plastic cabinet made of polycarbonate and aluminum profiles. The cabinet is cooled
by Peltier elements which keep a constant room temperature around the test stations.
Stress Relaxation Tester
Meeting ASTM D882 & ASTM D3354 Standards
Full-Featured Force Test Stands for Film and Paper
In the past, film extruders, paper producers, converters, and woven/non-woven fabric producers
have had the choice of test stands and universal test machines which are either value-priced
peak-force-only machines, or expensive computer-operated integral-load cell machines. Now you
can have the best of both worlds in a single instrument. The series MT-1500, a simple to use
computer operated tester, with Quality Control software for automatic calculation and graphical
display of break, elongation, yield, modulus, and other, tension and compression force information.
Improved Film & Paper Quality, Increased Profit Margins
www.WorldofTest.com/stress-relaxation-tester
ISO 3384, ISO 6914, ASTM D 6147
Stress Relaxation Tester - EB 02 Relaxation system for continuous measurement in either compression or
tension. The Stress Relaxation Tester - EB 02 meets the requirements in ISO 3384, ISO 6914 and ASTM D6147.
The relaxation rigs are used in combination with the cell ageing ovens our new range of ovens when testing at
elevated temperature.
The Series 1500 Precision Force Test Stand is a proven tool for more closely controlling nominal
and peak strength and elongation characteristics to speed your:
• Research and development of new film and paper products, converted materials,
wovens/non-wovens, fabrics and textiles.
• Inspection of incoming film and paper products
• In-process checks to ensure on-spec product for converting operations& Quality-control
1
27
4
ADVANCED
TESTING
ADVANCED
TECHNOLOGIES
TESTING
5
TECHNOLOGIES
More Plastics Testing Instruments
Universal Testing Machines
Hot Set Tester
Universal Testing Machine - QM-Series
www.WorldofTest.com/hot-set-tester
www.WorldofTest.com/universal-testing-machine-qm-series
IEC 811-2-1, IEC 811
Hot Set Tester - EB 16II is made for hot set testing of cable material according to IEC 811-2-1. To avoid too high
temperature loss when inserting and cutting the samples, the samples are introduced through a small opening in the
top of the oven. To get a suitable working height and not shake the samples during insertion, the oven is fixed and the
sample holder moves up and down by a servo motor driven screw system. The oven has a controlled air exchange
rate and low air speed which can be controlled by a flow meter, meeting the requirements for ageing ovens in IEC
811.
Measurements are made through the window with a laser pointer mounted on a measuring scale placed on the door.
The window can be taken apart for cleaning. With a push on a button on the scale the measured values are entered
in an Excel template, when measuring the elongation. The set is measured outside the oven with a digital caliper also
connected to the computer.
The QM-Series Universal Testing Machine is loaded with technical features, ergonomic design and is
produced with the highest quality as a benchmark. This instrument is suitable to be used in: Production
lines, where the operator has to be fast and efficient, and accurately control the test, Testing lab environments, where using the advanced software, the users can analyze the test data, have full control on
processing, filing, and test management.
A Universal Testing Machine (UTM) is used to test both the tensile and compressive strength of materials.
Universal Testing Machines are named as such because they can perform many different varieties of tests
on an equally diverse range of materials, components, and structures. Most UTM models are modular, and
can be adapted to fit the customer’s needs.
Universal Testing Machines can accommodate many kinds of materials, ranging from hard samples, such
as metals and concrete, to flexible samples, such as rubber and textiles. This diversity makes the Universal
Testing Machine equally applicable to virtually any manufacturing industry.
The UTM is a versatile and valuable piece of testing equipment that can evaluate materials properties such
as tensile strength, elasticity, compression, yield strength, elastic and plastic deformation, bend compression, and strain hardening. Different models of Universal Testing Machines have different load capacities,
some as low as 2 kN and others as high as 3,000 kN.
QM -Series Universal Testing Machine Range
Model / Specs
QM-2 QM-5
for QM-Series
Capacity (kN)
2
5
Total Cross- head 400 or 800
Movement (mm)
Elastometer - EF-02
www.WorldofTest.com/elastometer
QM-10
QM-20
QM-50
QM-100
QM-200
QM-300
QM-500
10
650 or
1,100
20
800 or
1,200
50
1,000 or
1,100
100
1,000
200
1100
300
1100
500
1200
ISO 3384, ISO 7743
Discontinuous Stress Relaxation Tester- EF-02 - Elastometer is used for Compression Tests on profiles & for Discontinuous stress relaxation tests.
The test jigs for stress relaxation are simple in design but made with very high accuracy regarding surface finish and
parallelism of the platens. The discontinuous stress relaxation system has an economical advantage when many
materials are to be tested during very long times.
Carbon Black Content Analyzer
www.WorldofTest.com/carbon-black-content-analyzer
Q-SOFT Control Software
QSOFT is the software used to control the Universal Testing Machine. The QM-Series unit and the software are designed to accommodate a
wide variety of testing needs. The software has a variety of preset programmed test cycles for compression, tensile, and cyclical testing to meet
a range of testing standards
This software has the following capabilities:
The Carbon Black Content Analyzer - ES-14 - Tube Oven can be used for the following and
similar test methods:
• ISO 247 Rubber - Determination of Ash
• ISO 1408 Rubber - Determination of carbon black content
• ASTM D297 Rubber - Determination of carbon black and ash content
• ASTM D1603 Plastics - Test method for carbon black in olefin plastics
Temperature controller, over temperature thermostat, drying tube, flow meters, wash bottles and 5 quartz glass boats are included.
• Selection of communication language
• Setting of test methods
• Test execution
• Analysis of the results
• Printing of the certificates
• Graphic post-analysis of the tests
• Statistical analysis of the tests
Environmental Stress-Cracking Tester
www.WorldofTest.com/environmental-stress-cracking-tester
ASTM D1693-01
The environmental stress cracking chamber is used to determine of the susceptibility of ethylene plastics,
as defined in terminology D883, to environmental stress-cracking when subjected to the conditions specified in ASTM D1693-01,under certain conditions of stress and in the presence of environments such as
soaps, wetting agents, oils, or detergents, ethylene plastics may exhibit mechanical failure by cracking.
1
3
28
ADVANCED
TESTING
ADVANCED
TECHNOLOGIES
TESTING
TECHNOLOGIES
More Plastics Testing Instruments
Salt Spray Tester
www.WorldofTest.com/salt-spray-tester
ASTM-B117, JIS-D0201, JIS-H8502, JIS-H8610, JIS-Z2371, GB/T 10125
The Salt Spray Tester – Salt Spray Cabinet – Chamber – Fog Apparatus is used to create and maintain the salt
spray (fog) test environment, and test the anti-corrosion quality of all the materials surfaces after the rust-proof
of painting, coating, electroplating, anodizing and rust-proof of greasing. Our salt spray testers available in two
capacities meet ASTM-B117, JIS-D0201, JIS-H8502, JIS-H8610, JIS-Z2371 and other International Standards
test methods. Power supplied can be configured upon request.
Plastics Testing Technologies
Plastics
General Applications
Plastics are made by using microscopic building blocks
Plastics are often used to replace other common materials such as metals and
called hydrocarbons, typically derived from petroleum
wood because of their low cost and durable characteristics. Plastics offer
or natural gas. These monomers (small molecules) are
innumerous advantages in production as they are easily softened or melted,
bonded into chains called polymers or plastic resins.
and can be molded into any shape.
Different combinations of monomers yield resins with
Plastics in general can be divided into two categories: thermoplastic and
special properties and characteristics.
thermoset processing groups.
Rotary Abrasion Tester
Thermoplastic materials are made of polymers or long-chain macromolecules.
www.WorldofTest.com/rotary-abrasion-tester
Heat can transform this material, giving it the flexibility to be formed into tools
or key components of other products. This characteristic also allows plastics to
The Rotary Platform Abrasion Testing method was introduced in the 1930's and has been a popular method for
evaluating abrasion and wear resistance. Our Rotary Abrasion Tester is a cost-effective, easy to use and high
quality instrument,compared to Taber®* Abraser used to cover a wide spectrum of materials (including plastics,
coatings, laminates, leather, paper, ceramics, carpeting, safety glazing, etc.) and is built in conformance to
ASTM C501 / C1353 / D4157 / D1044 / D3389 / D3451 / D3730 / D3884 / D4060 / D4685 / D4712 / D5144 /
D5146 / D5324/ D6037 / D7255/ F362/ F510/ F1478/ G195/ F1978, TAPPI T476, as well as many other
International DIN, MIL, EN, BN, ISO, JIS, SAE, BS, and ANSI standards.
be reused or recycled. The other components that make up this material are
additives that change properties such as color, stiffness, weatherability, and
wear resistance. Thermoplastic materials are necessary for essential manufacturing materials such as sheets, round bars, round bars with a steel core,
pipes, and various other sections.
Thermoset plastics are made of polymers that are permanently set through
exposure to heat and catalysts during the manufacturing process. As heat can
Digital Torque Tester
no longer change their shape, these materials are thereby used at higher
www.WorldofTest.com/digital-torque-tester-qt-dtt-10
temperatures and pressures than thermoplastics can withstand.
ASTM D2063, ASTM D3198, ASTM D3474
QT-DTT-10 is specially designed instrument to effectively and efficiently measure the torque retention properties
of container or continuous thread closure systems of various packaging containers with varied designs. It is best
suitable for packaging development and engineering evaluation of various designs of packaging containers and
its quality control.
The ideal combination of processing flexibility and performance enables
plastics to be used in an extensive range of applications ranging from low-cost
disposable items to expensive specialty parts. Plastics are key materials in the
production of automotive parts, electrical appliances, aircraft and aerospace
components, sporting goods, packaging, toys, food packaging, and much
Ink Rub Tester
more. There is no other material that can match the durability of plastic due to
www.WorldofTest.com/ink-rub-tester
its flexibility, fast molding qualities, color absorption, resistance to corrosion,
Rub resistance describes the ability of printed material to withstand marking, scuffing or smudge during handling
in conversion, packaging, transportation, distribution and use. QT-IRT simulates a similar environment to test the
rub resistance on printed materials.
It is used to analyze the life of label by creating actual environment of application to evaluate abrasion resistance
of surface coating layer of printed material.
It simulates the actual working environment of product and helps to identify the quality and printing method to
be used for printing of label based on application of product and its working environment.
low weight, electrical and thermal insulation, and general toughness and
longevity.
The extensive use of plastics requires testing at all stages of development and
manufacturing to ensure that products are able to perform well in their intended
use. The tests are conducted by companies to guarantee quality control, using
internationally standardized methods in the production of all plastic products.
As the characteristics of plastics are influenced by external temperature chang-
Synchronous Thermal Analyzer - QT-STA100
es, testing should also be conducted at high and low temperatures. Extereme
www.WorldofTest.com/synchronous-thermal-analyzer-qt-sta100
temperatures can be achieved in environmental chambers, which provide the
Synchronous Thermal Analyzer QT-STA100 combines TGA (Thermo gravimetric Analysis) with DSC (Differential Scanning Calorimeter), in which we can get the information of TG and DSC in synchrony using the
same sample during the same operation.
conditions of real-world applications. For tensile testing, laser and video extensometers are also used for high temperature strain measurements as well as
for plastics materials that are sensitive to contact stresses or contamination
29
1
2
ADVANCED
TESTING
ADVANCED
TECHNOLOGIES
TESTING
TECHNOLOGIES
Plastics Testing Technologies
More Plastics Testing Instruments
Differential Scanning Calorimeter
About Qualitest
www.WorldofTest.com/differential-scanning-calorimeter
Qualitest is a global contender and one of the top-ranking manufacturers and suppliers of testing technologies worldwide. With our extensive
portfolio of state-of-the-art and competitively priced testing machines, systems and software, we supply standard or customized solutions for
many test, measurement and quality control tasks required in the world of modern materials testing.
The key products from Qualitest range include hardness testers, universal testing machines, metallography, materials testing equipment,
The Differential Scanning Calorimeter - QT-DSC6 Series is a compact and low-cost thermal
analysis instrument. Differential Scanning Calorimeter - QT-DSC6 Series have a vast number
of industrial applications, particularly in the quality control of engineering thermoplastics.
spectroscopy, microscopy, portable testers, and instruments for testing metals, plastics, rubber, textiles, paper, paint, cement, concrete and
Limiting Oxygen Index Chamber
packaging materials, as well as technologies for NDT/Ultrasonic, surveying, automotive, aerospace, mining, oil/gas/pipe industries, gold & Jewel-
www.WorldofTest.com/limiting-oxygen-index-chamber
lery applications and much more.
ASTM D2863, ISO 4589, BS 2782 part 141
The Limiting Oxygen Index (LOI) fire test is perhaps the most economical and precise quality control test for combustible materials. Its ease of use together with high levels of precision has made this technique a primary characterization
and quality control tool for the plastic materials and electric cable industries. It is often used in materials specifications
and material/product data sheets and included in some US Mil Specs. The test assesses the minimum percentage of
oxygen in the test atmosphere that is required to marginally support combustion.
Table of Contents
3
Universal Testing Machines
5
Universal Force Test Systems
6
Durometer - Shore Hardness Testers
8
Charpy / Izod Pendulum Impact Testers
9
Plastics Pipe / PVC Testing Instruments
10
Drop Impact Testers
11
Specific Gravity Tester – Densimeter
12
Brittleness & Freezing Testers
13
Sample Specimen Preparation Equipment
14
Specimen Dies & Clicker Presses
16
MFI, Capillary Rheometer, HDT/VICAT & LME
17
Friction, Adhesive, Tearing Testers
18
Film Permeability Tester
19
Film Thickness Gauges
21
More Film Testing Instruments
22
Color Testing Instruments
25
Block Oven / Aging Oven
26
Low Temperature Tester – Combo
27
Creep & Relaxation Tester
28
More Plastics Testing Instruments
Leak Tester - QT-LT-V (Negative Pressure Method)
www.WorldofTest.com/leak-tester-qt-lt-v
ASTM D 3078
Leakage testing of pressurized packages is very important part of product manufacturing and preservation
of product to maintaining its quality till consumption of product for industries which deal with food, beverages, pharmaceuticals, personal care etc.
Leakage Tester – QT-LT-V is used to test the hermetic sealing quality and performance of packaging bags,
bottles, cans, etc.
Leakage and Seal Strength Tester - QT-LT-P
www.WorldofTest.com/leakage-and-seal-strength-tester-qt-lt-p
ASTM F1140, ASTM F2054, ISO 11607-1, ISO 11607-2
Qualitest Leakage Tester QT-LT-P tests the hermetic seal quality, strength, joint/disengaging force, performance, compression and burst resistance of packaging bags, bottles, flexible packages, cans covers etc.,
used in food industries, beverage, pharmaceuticals, and personal care and so on. These test methods
provide rapid means of evaluating tendencies for package failure when the package is exposed to a
pressure differential.
1
30
ADVANCED
TESTING
ADVANCED
TECHNOLOGIES
TESTING
TECHNOLOGIES
ADVANCED
TESTING TECHNOLOGIES
Key QualiBenefits
Qualitest is proud to retain a constantly growing roster of global customers who continue to benefit from our product offerings.
Qualitest offers guarantees that make us stand out in the competitive testing equipment industry in offering the best price/
quality ratio products, efficient support, and much more. These are a few key benefits that we continue to offer to our
customers worldwide:
Plastics Testing Technologies
Universal Testing Machines
Low Price Guarantee
High Level of Standards
Qualitest is confident to offer competitive
products at the best possible prices. That’s
why we offer 110% Low Price Guarantee to
meet and beat any price for the same level
product. We ensure to offer the best value for
your investment.
Qualitest products are built to meet and
exceed latest North American and global
standard requirements
Efficient Logistics
#1 Source for Testing
Technologies
Short delivery periods for standard products
from our many convenient worldwide distribution centers. Our large volume of shipments
helps us to offer the most competitive
shipping rates worldwide.
Universal Force Test Systems
Durometer - Shore Hardness Testers
Charpy / Izod Pendulum Impact Testers
Plastics Pipe / PVC Testing Instruments
Drop Impact Testers
Specific Gravity Tester – Densimeter
Brittleness & Freezing Testers
Qualitest is recognized as a one stop source
for complete quality control lab solutions, as
we provide streamlined support for all of your
testing requirements without the need of
relying on too many sources.
Sample Specimen Preparation Equipment
Vendor of Choice for many
Fortune 500 companies
Centralized Service &
Support Coordination
Film Permeability Tester
North American and global Fortune 500
corporations continue to benefit from Qualitest range of products, as we ensure the
highest security and assurance for their
investment.
Managed through our central service dept.
we offer efficient customer service support,
direct or via our worldwide QualiService
authorized network.
Specimen Dies & Clicker Presses
MFI, Capillary Rheometer, HDT/VICAT & LME
Friction, Adhesive, Tearing Testers
Film Thickness Gauges
Color Testing Instruments
Block Oven / Aging Oven
Low Temperature Tester – Combo
Creep & Relaxation Tester
Toll-Free: 1.877.884.TEST (8378) | Fax: 954.697.8211
info@qualitest-inc.com | www.WorldofTest.com
USA Canada UAE Mexico India Hong Kong