CABLE TESTER

CABLE TESTER
Model : CB-933
ISO-9001, CE, IEC1010
`
FEATURES
* Transmitter : 17 alligators,
Red x 16 and Black x 1.
* Receiver : 2 alligators,
Red x 1 and Black x 1.
* To identify & trace up 16 cores in
multi-way cable. It can also be
connected to metal type of heating &
the water supply installation system
for this purpose.
* High impact ABS plastic housing
case.
* LED display, easy operation
with clear readout.
* Wide application for communication
cable maintenance, check up...etc.
* 1.5V AA ( UM-3 ) battery x 4 PCs,
LUTRON ELECTRONIC
CABLE TESTER/CABLE IDENTIFIER
Model : CB-933
SPECIFICATIONS
Display
Two red LED lamps.
Power
DC 9V battery, Alkaline type,
006P, MN1604 ( PP3) or equivalent.
Transmitter
Power current
2 mA.
Alligators
17 alligators, green x 16, black x 1 .
Dimensions
125 x 70 x 26.5 mm ( 4.9 x 2.8 x 1.0 inch).
Weight
Approx. 355 g/0.77 LB.
Housing
High impact ABS plastic.
Display
14 mm seven segment LED, 2 digits, one red LED lamp.
Power
DC 9V battery, Alkaline type,
006P, MN1604 ( PP3) or equivalent.
Receiver
Power current
33 mA.
Alligators
2 alligators, red x 1, black x 1.
Dimensions
125 x 70 x 26.5 mm ( 4.9 x 2.8 x 1.0 inch).
Weight
Approx. 355 g/0.77 LB.
Housing
High impact ABS plastic.
Cable resistance
25 K ohm, max.
Accessories
Transmitter with 17 cables & alligators .......................................... 1 PC.
Receiver with 2 cables & alligators ................................................ 1 PC.
Operation manual x 1 PC.............................................................. 1 PC.
Applications
To identify & trace up 16 cores in multi-way cable. It can also be connected to
heating and the water supply installation system for this purpose.
OPERATION
1) At one end of the cable, connect one of the transmitter terminals marked " CH 1 to CH16 " to
each core of the cable under test.
2) Connect the " COM " reference lead of the transmitter to a core which is the only known one.
At the other end of the cable, connect the " COM terminal " ( black alligator ) of the receiver to
the reference lead to which the " COM terminal " ( black alligator ) of the transmitter is also
connected. When the " Input terminal " ( red alligator ) of the receiver is successively touched on
the cores of the cable under test, the relevant number of the way is indicated on the display of
the receiver ( 1-16 ).
* Appearance and specifications listed in this brochure are subject to change without notice.
0509-CB933