Adapter M58 / F-mount (Art. No.: 11117852) Adapter M58 / M42x1

Dimensions Camera LXC-20 / 40
LXC cameras – Extremely high resolution and speed
Notice
▪▪ Camera Link progressive scan CMOS camera
▪▪ Excellent image quality
▪▪ Global shutter architecture for minimized motion blur
▪▪ Binning and true partial scan function (ROI) for increased frame rates
▪▪ High Dynamic Range (HDR) image acquisition
▪▪ External synchronization via industrial compliant process interface (trigger / flash)
▪▪ Power over Camera Link® (PoCL) support
▪▪ Two standard 26 pin Mini-Camera Link® connectors
▪▪ Support for Camera Link® Base, Medium, Full and EightyBit configurations
▪▪ Camera parameter programmable via GenCP protocol
LXC-20 and LXC-40 have a C-mount interface only.
2048 × 1088
2048 × 2048
4096 × 3072
5120 × 3840
337
180
63
32
26
Pixel 0,0
4 x M3 x 6
17,5
8
19,2
47,95
43,05
8
26
Quick Start Guide
LXC cameras (Camera Link®)
14,7
2/3“
1“
APS-C
35 mm
Monochrome / Color
LXC-20M / C
LXC-40M / C
LXC-120M / C
LXC-200M / C
26
Full Frames
[max. fps]
20
18,035 ±0,025
17,5
Resolution
47
60
Sensor Size
48,8
4,9
60
47
Camera Type
8
1"-32 UN
®
30
Product Specification
Latest software version and technical
documentation are available at:
Notice
8 x M3 x 6
Further technical details are
available in the respective
data sheet.
www.baumer.com/vision/login
Conformity / Safety
38,45
Dimensions Camera LXC-120 / 200
Lens Adapter for LXC-120 / 200
Conformity:
▪▪ Adapter M58 / F-mount
(Art. No.: 11117852)
8
26
CE, RoHS
Storage temp.
Operating temp.
Housing temp.
Humidity
-10 °C ... +70 °C
+5 °C ... +50 °C
max. +50 °C
10 % ... 90 %
Non-condensing
14,7
20
▪▪ Adapter M58 / M42x1-mount (26.8mm)
(Art. No.: 11127232)
26
17,5
12 ±0,025
17,5
Environmental requirements:
48,8
60
47
8
Pixel 0,0
47,95
4 x M3 x 6
43,05
8
26
38,3
All LXC cameras comply with the recommendation of the
European Union concerning RoHS Rules.
▪▪ Protect the sensor from dirt and
moisture.
▪▪ Never open the camera housing.
▪▪ Avoid camera contamination by
foreign objects.
60
RoHS
Safety Precautions
47
We declare, under our sole responsibility, that the previously described Baumer LXC cameras conform with the
directives of the CE.
M58 x 0,75
CE
19,2
▪▪ Adapter M58 / M42x1-mount (45.5 mm)
(Art. No.: 11137781)
▪▪
Notice
suitable for Zeiss (e.g. Distagon T* 2/25 Z-M42-I, Planar T* 1.4/50 Z-M42-I,
Makro-Planar T* 2/50 Z-M42-I) and KOWA M42 lenses (e.g. LM28LF P-Mount,
LM35LF P-Mount)
8 x M3 x 6
Further Information
For further information on our products visit www.baumer.com
For technical issues, please contact our technical support:
support.cameras@baumer.com · Phone +49 (0)3528 4386-0 · Fax +49 (0)3528 4386-86
© Baumer Optronic GmbH · Badstrasse 30 · DE-01454 Radeberg, Germany
Technical data has been fully checked, but accuracy of printed matter not guaranteed.
Subject to change without notice. Printed in Germany 01/16.
v1.0
11160606
38,45
▪▪ Adapter M58 / C-mount
(Art. No: 11115198)
General Description
LED Signaling
1
2
Installation
Installation using
Camera Link® Base:
3
▪▪ Connect the camera using
an appropriate cable to the
framegrabber board on your
PC using the lower sdr-26
jack on the camera side
▪▪ If required, connect a strobe
to the connector
LED
4
▪▪ Connect the camera to
power supply
Installation sample
1 - Framegrabber board; 2 - CameraLink® cable;
3 - Process interface cable; 4 - Power cable
5
No.
Description
No.
Description
LXC-20 / 40
C-mount only
1
LXC-120 / 200
lens mount (M58), adapter for
other lens mounts available
Camera Link® socket
2
(Base)
3
4
Signaling-LED
LED
5
Camera Link® socket
Signal
Meaning
green on
Power on, link good
green blinking
Power on, no link
red on
Error
red blinking
Boot proess or Warning
(update in progress, don’t switch off)
yellow
Readout active
(Medium / Full / EightyBit)
Power Supply / Digital-IO
Camera Link® sockets
CL BASE
Baumer
CL FULL
4
2
8
6
Camera Link®
(Base)
Pin
1
2
3
4
5
6
7
8
9
10
11
12
13
3
5
To use Power over Camera Link® (PoCL, 12V DC ± 20%), both Camera Link®
sockets must be used.
Signal
GND
X0X1X2XCLKX3SERTC+
SERTFGCC1CC2+
CC3CC4+
GND
Pin
14
15
16
17
18
19
20
21
22
23
24
25
26
Camera Link®
(Medium / Full / EightyBit)
Signal
GND
X0+
X1+
X2+
XCLK+
X3+
SERTCSERTFG+
CC1+
CC2CC3+
CC4GND
Pin
1
2
3
4
5
6
7
8
9
10
11
12
13
Signal
GND
Y0Y1Y2YCLKY3100 Ω term.
Z0Z1Z2ZCLKZ3GND
Pin
14
15
16
17
18
19
20
21
22
23
24
25
26
Signal
GND
Y0+
Y1+
Y2+
YCLK+
Y3+
100 Ω term.
Z0+
Z1+
Z2+
ZCLK+
Z3+
GND
1
2
3
4
5
6
7
8
white
brown
green
yellow
grey
pink
blue
red
7
1
not in use
Power VCC+
IN 1 (line 0)
IO GND
IO Power VCC
OUT 1 (line 1)
Power GND
not in use
Caution
Provide adequate dissipation of heat, to ensure that the temperature
does not exceed +50 °C (+122 °F).
The surface of the camera may be hot during operation and immediately
after use. Be careful when handling the camera and avoid contact over a
longer period.
As there are numerous possibilities for installation, Baumer do not specifiy a specific method for proper heat dissipation, but suggest the following
principles:
▪▪ operate the cameras only in mounted condition
▪▪ mounting in combination with forced convection may provide proper
heat dissipation
T
Power Supply
Power VCC
▪▪ Connect the camera to
power supply
Heat Transmission
M8 / 8 pins wire colors of the connecting cable
Notice
▪▪ If required, connect a strobe
to the connector
1 - Framegrabber board; 2 - CameraLink® cable;
3 - Process interface cable; 4 - Power cable
Power Supply / Digital-IO
The camera has two Camera Link® sockets. To differentiate between Camera Link® socket, please look at the label. You can not
use the CL Medium / Full / EightyBit socket alone!
▪▪ Connect the camera using
two appropriate cables to
the framegrabber board on
your PC.
Installation sample
Power Supply and Process Interface
Notice
Type: XXXXXx
(xxxxxxx)
Installation using
Camera Link® Medium / Full /
EightyBit:
T
12 VDC ... 24 VDC ± 20%
Measure Point
T
Maximal Temperature
+50 °C (122 °F)