DR386M-P.BGBRLLK_ENG 6/13/08 9:59 AM Page 7 Remote control a a AV: Changes the input source (Tuner, AV1-3, or DV IN). SUBTITLE: Selects a subtitle language. TV/DVD: Press to switch between ‘TV mode’, in which you can operate the picture and sound from the TV, and ‘DVD mode’, in which you can operate the picture and sound from the DVD recorder. TEXT: Switches between digital text mode and normal TV viewing. 0-9 numerical buttons: Selects numbered options in a menu. d REPEAT: Repeat sequence, chapter, track, title, all. TITLE: Displays the disc’s Title menu, if available. TV Control Buttons: You can control the sound level, input source, and power switch of your TV. CLEAR: Removes a track number on the Program List. b Coloured buttons: Used when an EPG screen is displayed or when digital text service is in use. The function of each coloured button will be described on-screen. REC(z): Starts recording. Press repeatedly to set the recording time. c ): Selects an audio language or audio channel. FAV: Displays the favorite program list. OPEN/CLOSE: Opens and closes the disc tray. b AUDIO ( POWER: Switches the unit ON or OFF. MARKER: Selects multiple files/titles on the list. GUIDE: Displays the EPG menu. SCAN (m / M): Search backwards or forwards. PR (+/-): Scans up or down through memorized channels. SKIP (. / >): Go to next or previous chapter/track/file. PR LIST: Displays the program list menu. PAUSE/STEP (X): Pause playback or recording temporarily. PLAY (N): Starts playback. STOP (x): Stops playback or recording. c HOME: Activates the HOME menu. d MENU/LIST: Displays the menu on a DVD disc or switches between Titlelist-Original and title List-Playlist menu. b / B / v / V (left/right/up/down): Used to navigate on-screen displays. OK ( ) : Acknowledges menu selection. BACK (O): Removes the on-screen displays. INFO (i): Accesses on-screen Display. 7 DR386M-P.BGBRLLK_ENG 6/13/08 9:59 AM Page 16 Switching the program list on the channel editing screen Setting the AV1 Decoder You can switch the program list on the channel editing screen. Sets the AV1 scart jack for inputting encoded video signals. This option sets the unit to output the encoded signal from AV1 scart jack to AV2 (DECODER) scart jack for decoding. The decoded signal is then sent back through the AV2 (DECODER) jack so you can record or watch PAY-TV/Canal Plus programs. Press AV once while the channel editing screen appears. Press OK( ) to turn on the option and press OK( ) again to turn off. The [Canal+] appears on the screen when this option is turned on. Use v V to move the highlight position to the top of the program list. Use b B to select [DIGITAL TV], [ANALOG TV] or [RADIO] then use v V to select a program on the list. Using the Home Menu ON REMOTE Setting a favorite program You can set a program as a favorite channel. Select a program on the program list then press OK( ) to highlight the option menu on the left side of the screen. Select [Favorite] option then press OK( ). The program is set to the favorite program and [FAV] appears on the TV screen. 16 1 Displays the HOME menu: HOME 2 Select a main option: bB 3 Select a sub option: vV 4 Execute the selected option: OK ( 5 Exit the HOME menu: HOME ) DR386M-P.BGBRLLK_ENG 6/13/08 9:59 AM Page 17 Using the Home Menu - more you can do Adjust the SETUP settings MOVIE DISC – Displays [Title List] menu, which shows recorded titles on the disc. (page 33) – Displays [Movie List] menu, which shows DivX® movie files on the disc. (page 28) – Plays DVD-Video disc (page 26). USB – Displays [Movie List] menu, which shows DivX® movie files on the USB Flash Drive. (page 28) PHOTO DISC – Displays [Photo List] menu, which shows photo files on the disc. (page 30) USB – Displays [Photo List] menu, which shows photo files on the USB Flash Drive. (page 30) ON REMOTE 1 Displays the HOME menu: HOME 2 Select the [Easy Menu] option: bB 3 Select the [SETUP] option: OK ( 4 Select a desired option on the first level: vV 5 Move to second level: B 6 Select a desired option on the second level: vV 7 Move to third level: B 8 Adjust or confirm the setting: v V, OK ( 9 Go back to the previous level: b ) ) MUSIC DISC – Displays [Music List] menu, which shows music files or audio tracks on the disc. (page 29) USB – Displays [Music List] menu, which shows music files on the USB Flash Drive. (page 29) Easy Menu SETUP – Displays SETUP menu. (page 17) First level Rec Mode – Displays [Record Mode Set] option in the SETUP Menu. (page 20) Record Timer Record – Displays [Timer Record] menu. (page 31) Second level Third level 17 DR386M-P.BGBRLLK_ENG 6/13/08 9:59 AM Page 18 Adjust the SETUP settings - more you can do Adjust the general settings TV Aspect – Selects the aspects ratio of the connected TV. [4:3 Letter Box]: Select this when connecting to a standard 4:3 screen TV and prefer the wide picture with bands on the upper and lower portions of the screen. [4:3 Pan Scan]: Select this when connecting to a standard 4:3 screen TV and prefer the wide picture on the entire screen cuts off the portions that do not fit. [16:9 Wide]: Select this when connecting to a wide-screen TV. AV2 Connection – You can connect a decoder or the other device to the AV2(DECODER) jack on the rear panel. Auto Programming – This option automatically scans and sets the available channels. Password is needed to access this option, if [Lock System] option is set to [On]. (page 20) [Country]: Select a country where you operate this unit. If the country that you want to set is not listed, select [Others]. [All, Digital or Analog]: Select a broadcasting type which you want to scan automatically. [Start]: Start the channel scanning. Program Edit– This option allows you to add channels and edit preset channels. Password is needed to access this option, if [Lock System] option is set to [On]. (page 20) [Add Channel]: Select the broadcasting type between [Digital] and [Analog] and then press v V to select the channel and press OK( ) to add the selected channel. [Edit]: Displays the screen which show preset channel list and channel editing options. (page 15) Clock Set– The clock must be set in order to use [Timer record]. [Auto]: Set the channel that broadcasts a clock signal and the clock will be set automatically. If the clock that has automatically set is different with your local clock, you can amending by using [Time Offset] option. (For example, when British summer time is in use.) Press B to select [Time Offset] option. Press v V to select a value then press OK( ) (0, 30, 60, 90, 120). Select “0” if the clock that has automatically corrected itself with local time. [Manual]: If there is no channel that broadcasts a clock signal in your area, you can set the time and date manually. 18 [Decoder]: Select this when you connect a PAY-TV decoder to the AV2(DECODER) jack on the unit. [Others]: Select this when you connect a VCR or similar recording device to the AV2(DECODER) jack on the unit. Video output format – Select an option according to the TV connection type. [YPbPr]: When your TV is connected to the COMPONENT OUTPUT jacks on the unit. [RGB]: When your TV is connected to the SCART jack on the unit. Power Save mode – Selects whether the DVD recorder is in power save mode when the power is turned off. This option is not available when a timer recording is set. [ON]*1: The front panel display is off and only signals arriving at the antenna input are passed through when the DVD recorder is turned off. [OFF]: Turns off the [Power Save Mode]. *1 If you turn off the unit while receiving encoded signals, the power save mode will not work Antenna Feed 5V – If you are using an indoor antenna, use one with a signal amplifier rated at DC 5V, 100mA and set this option to [ON]. [ON]: Power is supplied to the connected antenna. [OFF]: The unit does not supply power to the connected antenna. Initialization – You can reset the unit to its original factory settings. [Factory Set]: You can reset the unit to all its factory settings. Some options cannot be reset (Rating, Password, and Area Code). The auto setup menu appears on the screen after the factory settings.