Registering a Gaming Device on the Residence Hall Network

You can add your gaming system to the network by going to
http://enac.fsc.edu/self_registration. But, first you will need to
determine the MAC address of your system. Here’s how:
Nintendo Wii (LAN Adapter required for in room connectivity)
1.
2.
3.
Start Wii system without a disc
From the home screen, select the Wii button in the lower left hand corner.
Click on Wii Settings.
4.
On this screen, select the right arrow
to advance to the 2nd set of settings.
Select the Internet option.
Select the Console Information
option.
5.
6.
7.
The MAC address will be listed under
USB Ethernet Adapter MAC
Address.
Microsoft XBox
1.
2.
3.
4.
Turn on your Xbox console with no game disc in the disc tray.
From the Xbox Dashboard, choose Xbox Live.
These steps assume you cannot connect to Xbox Live until you finish configuring your Xbox
console to use your PC's MAC address. Therefore, you should receive the following message:
"Could not connect to Xbox Live. Do you want to troubleshoot your network connection?".
From the Connect Status screen, select Settings.
The 12-digit number at the bottom-right corner of the Network Settings screens is the MAC
address of your Xbox console. Do not change your Xbox console MAC address, just write it
down so that you can use it later.
Microsoft Xbox 360
1.
2.
3.
4.
5.
Go to the System area of the Xbox
Dashboard and select Network Settings.
Select Edit Settings.
Under Basic Settings, check to make sure
the IP Settings is on Automatic.
Now go to Additional Settings, select
Advanced Settings.
At the bottom of this screen you'll see a
heading called Wired MAC Address.
Sony PS2
1.
2.
3.
4.
5.
Load the Start-up CD in your PS2.
Make sure you have the network cable disconnected.
Walk through the Start-Up CD until it starts testing
your connection. Since we disconnected the network
cable the test will fail.
You can now press the select button which will display
the MAC.
The 12-digit number is the MAC address of your PS2,
write it down so that you can use it later.
Sony PS 3
1.
2.
3.
4.
5.
Power up the PlayStation 3 without any disc in the drive.
Once the PlayStation 3 operating system has loaded, select Settings.
Once you are in Settings select Network Settings.
When the Network Settings list appears, select the first option which is titled Settings and
Connection Status List.
The physical address will be listed under MAC Address.