Installing and Operating the Personal Viewing System

Installing and Operating the
Personal Viewing System
(PVS) for Display C
Including Model with Personal
Entertainment Player (PEP)
Precor Incorporated
20031 142nd Avenue NE
P.O. Box 7202
Woodinville, WA USA 98072-4002
PVS for Display C OAM CW30632-101 rev A, en
Warranty P/N 301650-101
August 2012
Edition Information
INSTALLING AND OPERATING THE PERSONAL VIEWING
SYSTEM (PVS) FOR DISPLAY C
P/N CW30632-101
Copyright © August 2012 Precor Incorporated. All rights
reserved. Specifications subject to change without notice.
Trademark Note
Precor, AMT, EFX, and Preva are registered trademarks of
Precor Incorporated. Other names in this document may be
the trademarks or registered trademarks of their respective
owners.
iPod® is a trademark of Apple Inc., registered in the U.S. and
other countries.
Made for iPod® means that an electronic accessory has been
designed to connect specifically to iPod and has been certified
by the developer to meet Apple performance standards.
Apple is not responsible for the operation of this device or its
compliance with safety and regulatory standards. Please note
that the use of this accessory with iPod may affect wireless
performance.
Made for iPod touch® (1st, 2nd, and 5th generation), and iPod
nano® (1st, 2nd, 3rd, and 4th generation).
Manufactured under license from Dolby Laboratories. Dolby
and the double-D symbol are trademarks of Dolby
Laboratories.
Intellectual Property Notice
All rights, title, and interests in and to the software of the
Preva Business Suite, the accompanying printed materials,
any copies of such software, and all data collected via the
Preva Business Suite, are exclusively owned by Precor or its
suppliers, as the case may be.
Precor is widely recognized for its innovative, award-winning
designs of exercise equipment. Precor aggressively seeks U.S.
and foreign patents for both the mechanical construction and
the visual aspects of its product design. Any party
contemplating the use of Precor product designs is hereby
forewarned that Precor considers the unauthorized
appropriation of its proprietary rights to be a very serious
matter. Precor will vigorously pursue all unauthorized
appropriation of its proprietary rights.
Precor Incorporated
20031 142nd Ave NE, P.O. Box 7202
Woodinville, WA 98072-4002
1-800-347-4404
http://www.precor.com
Important Safety Instructions
Safety Precautions
Important: Save these instructions for future reference.
Read all instructions in the documentation provided with your
exercise equipment, including all assembly guides, user
guides, and owner’s manuals, before installation of this
device.
Note: This product is intended for commercial use.
Always follow basic safety precautions when using this
equipment to reduce the chance of injury, fire, or damage.
Other sections in this manual provide more details of safety
features. Be sure to read these sections and observe all safety
notices. These precautions include the following:


Read all instructions in this guide before installing and
using the equipment and follow any labels on the
equipment.
Make sure all users see a physician for a complete
physical examination before they begin any fitness
program, particularly if they have high blood pressure,
high cholesterol or heart disease; have a family history of
any of the preceding conditions; are over the age of 45;
smoke; are obese; have not exercised regularly in the past
year; or are taking any medication.
French equivalent of the above notice, for Canadian
markets: Il est conseillé aux utilisateurs de subir un examen
médical complet avant d’entreprendre tout programme
d’exercice, en particulier s’ils souffrent d’hypertension
artérielle, ou de cardiopathie ou ont un taux de cholestérol
élevé, s’ils ont des antécédents familiaux des précédentes
maladies, s’ils ont plus de 45 ans, s’ils fument, s’ils sont
obèses, s’ils n’ont pas fait d’exercices réguliers au cours de
l’année précédente ou s’ils prennent des médicaments. Si vous
avez des étourdissements ou des faiblesses, arrêtez les
exercices immédiatement.
6
Installing and Operating the Personal Viewing System (PVS) for Display C












Do not allow children, or people unfamiliar with the
operation of this equipment, on or near it. Do not leave
children unsupervised around the equipment.
Make sure all users wear proper exercise clothing and
shoes for their workouts and avoid loose or dangling
clothing. Users should not wear shoes with heels or
leather soles, and they should check the soles of their
shoes to remove any dirt and embedded stones. They
should also tie long hair back.
Never leave the equipment unattended when it is plugged
in. Unplug the equipment from its power source when it is
not in use, before cleaning it, and before providing
authorized service.
Note: The optional power adapter is considered a power
source for self-powered equipment.
Use the power adapter provided with the equipment. Plug
the power adapter into an appropriate, grounded power
outlet as marked on the equipment.
Care should be taken when mounting or dismounting the
equipment.
For Treadmills: Do not use typing or web surfing features
while walking at speeds that exceed a slow and relaxed
leisurely pace. Always stabilize yourself by holding a
stationary handle bar while using typing or web surfing
features.
For AMT and EFX: Always stabilize yourself by holding a
stationary handle bar while using typing or web surfing
features.
Read, understand, and test the emergency stop
procedures before use.
Keep the power cord or optional power adapter and plug
away from heated surfaces.
Route power cables so that they are not walked on,
pinched, or damaged by items placed upon or against
them, including the equipment itself.
Ensure the equipment has adequate ventilation. Do not
place anything on top of or over the equipment. Do not
use on a cushioned surface that could block the
ventilation opening.
Assemble and operate the equipment on a solid, level
surface.
Important Safety Instructions








7
Proper Location for Equipment
 For all equipment other than treadmills: Locate at
least 40 inches (1 meter) away from walls or
furniture on either side of the equipment, and 40
inches (1 meter) away from objects behind the
equipment.
 For treadmills: Locate at least 40 inches (1 meter)
away from walls or furniture on either side of the
treadmill, and at least 80 inches (2 meters) away
from objects behind the treadmill.
Important: These location standards should also be used
when positioning equipment away from sources of heat, such
as radiators, heat registers, and stoves. Avoid temperature
extremes.
Keep equipment away from water and moisture. Avoid
dropping anything on or spilling anything inside the
equipment to prevent electric shock or damage to the
electronics.
When using the treadmill, always attach the safety clip to
your clothing before beginning your workout. Failure to
use the safety clip may pose a greater risk of injury in the
event of a fall.
Keep in mind that heart rate monitors are not medical
devices. Various factors, including the user’s movement,
may affect the accuracy of the heart rate readings. The
heart rate monitors are intended only as exercise aids in
determining heart rate trends in general.
Do not operate electrically powered equipment in damp
or wet locations.
Never operate this equipment if it has a damaged cord or
plug, if it is not working properly, or if it has been dropped,
damaged, or exposed to water. Call for service
immediately if any of these conditions exist.
Maintain the equipment to keep it in good working
condition, as described in the Maintenance section of the
owner’s manual. Inspect the equipment for incorrect,
worn, or loose components, and then correct, replace or
tighten prior to use.
If you plan to move the equipment, obtain help and use
proper lifting techniques.
8
Installing and Operating the Personal Viewing System (PVS) for Display C








Equipment Weight Restrictions: Do not use the treadmill
if you weigh more than 500 pounds (225 kg). If you weigh
more than 350 pounds (160 kg), do not run on the
treadmill. For all other fitness equipment, the weight limit
is 350 pounds (160 kg).
Use the equipment only for its intended purpose as
described in this manual. Do not use accessory
attachments that are not recommended by Precor. Such
attachments may cause injuries.
Do not operate the equipment where aerosol (spray)
products are being used or where oxygen is being
administered.
Do not use outdoors.
Do not attempt to service the equipment yourself, except
to follow the maintenance instructions in the owner’s
manual.
Never drop or insert objects into any opening. Keep hands
away from moving parts.
Do not set anything on the stationary handrails,
handlebars, control console, or covers. Place liquids,
magazines, and books in the appropriate receptacles.
Do not lean on or pull on the console at any time.
CAUTION: DO NOT remove the cover, or you may risk
injury due to electric shock. Read the assembly and
maintenance guide before operating. There are no
user-serviceable parts inside. Contact Customer Support if
the equipment needs servicing. For use with single phase
AC power only.
Hazardous Materials and Proper Disposal
The batteries within self-powered equipment contain
materials that are considered hazardous to the environment.
Federal law requires proper disposal of these batteries.
If you plan to dispose of your equipment, contact Precor
Commercial Products Customer Support for information
regarding battery removal. Refer to Obtaining Service.
Important Safety Instructions
9
Product Recycling and Disposal
This equipment must be recycled or discarded according to
applicable local and national regulations.
Product labels, in accordance with European Directive
2002/96/EC concerning waste electrical and electronic
equipment (WEEE), determine the framework for the return
and recycling of used equipment as applicable throughout the
European Union. The WEEE label indicates that the product is
not to be thrown away, but rather reclaimed upon end of life
per this Directive.
In accordance with the European WEEE Directive, electrical
and electronic equipment (EEE) is to be collected separately
and to be reused, recycled, or recovered at end of life. Users
of EEE with the WEEE label per Annex IV of the WEEE
Directive must not dispose of end of life EEE as unsorted
municipal waste, but use the collection framework available
to customers for the return, recycling, and recovery of WEEE.
Customer participation is important to minimize any potential
effects of EEE on the environment and human health due to
the potential presence of hazardous substances in EEE. For
proper collection and treatment, refer to Obtaining Service.
Safety Approvals for Cardiovascular
Equipment
Precor equipment has been tested and found to comply with
the following applicable safety standards.
Cardiovascular Type Equipment:
 CAN/CSA, IEC, EN 60335-1 (Household and similar

electrical appliances - Safety)
EN 957 (Stationary training equipment, class S/B
compliant equipment)
PVS and P80 Regulatory Notice
This Precor equipment has been tested and found to comply
with the following applicable safety standards.

CAN/CSA, UL, IEC, EN 60065 (Audio, video and similar
electronic apparatus - Safety)
10
Installing and Operating the Personal Viewing System (PVS) for Display C
Radio Frequency Interference (RFI)
This Precor exercise equipment conforms to the following
national standards defining acceptable limits for radio
frequency interference (RFI).
Federal Communications Commission, Part 15
This equipment has been tested and found to comply with the
limits for a Class A digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a commercial
installation. The equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in
accordance with the owner’s manual instructions, may cause
harmful interference to radio communications.
WARNING
Per FCC rules, changes or modifications not
expressly approved by Precor could void the
user’s authority to operate the equipment.
Industry Canada
This Class A digital apparatus complies with Canadian
ICES-003.
Cet appareil numérique de la classe A est conforme à la norme
NMB-003 du Canada.
ATTENTION : Haute Tension
Débranchez avant de réparer
European Applications
CE compliance is claimed to the following directives:
2004/108/EC EMC Directive
2006/95/EC LVD Directive
2002/95/EC RoHS Directive
Directive compliance has been verified to the following
standards:







EN 55022
EN 55024
EN 60335-1
EN 60065 (P80 and PVS)
Important Safety Instructions
11
Electrical Recommendations: 120 V and 240
V Treadmills
Note: This is a recommendation only. NEC (National Electric
Code) guidelines or local region electric codes must be
followed.
You should have received a power cable that meets your local
electrical code requirements along with the equipment.
Precor treadmills must be connected to a 20 amp individual
branch circuit that can be shared only with one PVS. If you
need additional help with the power connections contact your
Precor authorized dealer.
Important: An individual branch circuit provides a hot conductor
and neutral conductor to a receptacle. The conductors must not be
looped, "daisy-chained", or connected to any other conductors.
The circuit must be grounded according to NEC guidelines or local
region electric codes.
Figure 1: North American 120-volt, 20-amp power receptacle
Figure 2: North American 240-volt, 20-amp power receptacle
12
Installing and Operating the Personal Viewing System (PVS) for Display C
Electrical Recommendations: All Equipment
Excluding Treadmills
Note: This is a recommendation only. NEC (National Electric
Code) guidelines or local region electric codes must be
followed.
For equipment fitted with a P80 console or Personal Viewing
System (PVS) screen a separate power connection is
required. For a 20 amp branch circuit up to 10 screens can be
connected. If the branch circuit has any other devices plugged
into the circuit the number of screens must be reduced by the
wattage of the other devices.
Note: The typical splitter power cords that have IEC-320 C13
and C14 plugs have a recommended maximum capacity of
five screens.
Figure 3: IEC-320 C13 and C14 plugs
Obtaining Service
Do not attempt to service the equipment except for
maintenance tasks. If any items are missing, contact your
dealer. For more information regarding customer support
numbers or a list of Precor authorized service centers, visit
the Precor web site at http://www.precor.com.
Table of Contents
Important Safety Instructions ................................................... 5
Safety Precautions ................................................................................ 5
Hazardous Materials and Proper Disposal .................................... 8
Product Recycling and Disposal ....................................................... 8
Safety Approvals for Cardiovascular Equipment ......................... 9
Radio Frequency Interference (RFI)............................................... 10
Industry Canada .................................................................................. 10
European Applications ...................................................................... 10
Electrical Recommendations: 120 V and 240 V Treadmills ..... 11
Electrical Recommendations:
All Equipment Excluding Treadmills ....................................... 12
Obtaining Service................................................................................. 12
Beginning the Assembly .......................................................... 15
Installation Requirements.................................................................. 15
Hardware Kit ......................................................................................... 15
EFX: Rewiring the Equipment ........................................................... 17
Installing the Cables ...........................................................................20
Attaching the Entertainment Option............................................. 22
Treadmill: Rewiring the Equipment ...............................................30
Installing the Cables and PVS Bracket .......................................... 32
Setting Up the PVS .................................................................. 45
About PVS System Settings .............................................................46
Viewing the System Settings ...........................................................49
Configuring the PVS Setup Menu................................................... 55
Troubleshooting the PVS .................................................................. 57
About the Personal Entertainment Player (PEP) .................... 61
Using the PVS and the PEP............................................................... 62
Replacing the iPod Cable .................................................................. 63
Maintenance ............................................................................ 67
Cleaning the PVS Screen .................................................................. 67
Limited Warranty for Precor Entertainment Products............ 69
Chapter
1
Beginning the Assembly
To assemble the equipment, you will need to attach the PVS
to the console and route several cables.
Important: Assemble the equipment according to the guidelines
in this manual to ensure that you do not void the Precor Limited
Warranty. Any damage caused during installation is not covered
by the Precor Limited Warranty.
Installation Requirements
Prior to assembly, make sure you have the required tools and
hardware. You will need the following tools to perform this
assembly:





Phillips screwdriver
³₁₅-inch socket head screwdriver
Set of metric hex wrenches
Set of SAE hex wrenches
Hex-drive torque wrench with #2 Phillips screwdriver bit
Hardware Kit
The hardware kit shipped with this equipment contains the
fasteners and other hardware components shown in the
following table. If the equipment includes a Personal
Entertainment Player (PEP), there will be additional
components as noted.
Before you begin assembly, make sure that your hardware kits
are complete. If not, please contact Precor Customer Support.
16
Installing and Operating the Personal Viewing System (PVS) for Display C
Table 1. Primary Hardware Kit
Hardware
Hardware Name
Quantity
Buttonhead screws, ¹₄ x ³₈
inch
8
Extension bracket
(Treadmills only)
1
Screen mount
1
Power cord splitter
1
T-raceway cover
1
Table 2. PVS Hardware Kit
Hardware
Hardware Name
Quantity
Buttonhead screws, M4
x 10mm
4
Coaxial television cable
1
Tie wraps
4
2.5 mm hex wrench
1
Power supply with AC
cord and power cable
1
17
Beginning the Assembly
Table 3. Controller Hardware Kit
Hardware
Hardware Name
Quantity
Controller assembly 1
(with or without PEP
option)
Headphone plug
assembly and cable
with ferrite
1
12-inch RJ-45 PVS
control cable
1
5-wire
1
entertainment option
cable
iPod tray and cable
(PEP only)
1
RCA audio/video
cable (PEP only)
1
18
Installing and Operating the Personal Viewing System (PVS) for Display C
EFX: Rewiring the Equipment
A PVS requires new cables to support its functionality.
Note: Use the cable retaining features when available to keep
the cords from interfering with the machinery.
Perform the assembly steps in the order presented. As you
remove the screws, set them aside in a safe place. You will
need them again later to complete the assembly.
To expose the wiring and connections inside the display
console and install the PVS:
1. Use a Phillips-head screwdriver to remove the eight
screws that secure the front and back neck covers. Set the
fasteners and covers aside.
Figure 4: EFX cover removal
2. Remove the four screws that secure the back console
plate. Set the fasteners and back console plate aside.
Figure 5: Back console plate removal
19
Beginning the Assembly
3. Remove the entertainment option cover. Tabs exist on
either side of the cover. Press the tabs to release the
cover. You can discard the entertainment option cover.
Figure 6: Entertainment option cover removal
4. At the base of the display console, remove the audio
cover. Place a finger inside the audio cover to push it out
of the display console. You can discard the audio cover
because it is replaced with the headphone jack.
Figure 7: Audio cover removal
20
Installing and Operating the Personal Viewing System (PVS) for Display C
Installing the Cables
Tape the ends of the cables together (the female coaxial
connection to the power cable), to make it easier to feed the
cables through the equipment.
Figure 8: Cable taping
To install the cables:
1. Loosen the display console from its bracket by removing
the two bottom buttonhead screws using a ⁵⁄₃₂-inch hex
key. This provides access to the EFX neck tube.
Note: Set the fasteners aside.
Figure 9: Display console removal
CAUTION: Do not lift the base of the display console too
much or you may inadvertently break the upper tabs or
damage the display console. Be careful that you do not jostle
or damage the heart rate electronics board on the inside of
the display console. Cable connections can become dislodged
which will impair the heart rate and upper display functions.
21
Beginning the Assembly
2. Feed the taped cable ends through the top of the console.
Lift the base of the display console and continue to feed
the taped cable ends through the neck tube.
Note: Leave about 1 foot (30 cm) of cables hanging out of
the upper portion of the display console. The coaxial and
power connections will be attached to the back of the
screen.
Figure 10: Cable route through console
3. Reattach the display console by inserting the two
buttonhead screws and wrench tighten.
Important: Make sure that the cables are not pinched
between the bracket and the display console.
4. Remove the two Phillips-head screws that secure the
upper boot. Slide the upper boot along the upright support
and tape it into place.
Figure 11: Boot in raised position
22
Installing and Operating the Personal Viewing System (PVS) for Display C
5. Feed the taped cables back up through the neck tube and
out the side hole. Continue to feed the taped cables down
through the upright support, following the same route as
the existing RJ45 cable.
Figure 12: Cable route through neck
6. Pull the taped cables out of the opening near the base of
the unit, and then feed them back through the same
opening. Continue feeding the taped cables through the
small opening in the lower boot and onto the floor.
Note: You may need to use needle nose pliers to gently
pull the cable connectors out the small opening.
Figure 13: Position of cables at base
23
Beginning the Assembly
Attaching the Entertainment Option
CAUTION: Do not try to access the tab found beneath the heart
rate electronics board.
To attach the entertainment option for the PVS:
1. Separate the display console face from the console. Start
at the top and work toward the bottom, pressing the five
tabs to release it. This provides easier access to the 5-pin
connector.
Figure 14: Console face removal
2. Hold the integrated controller above the display console.
Feed the audio cable up through the opening in the top of
the display console and connect it to the integrated
controller. Let the end of the audio cable with the ferrite
clamp hang loose for now.
CAUTION: It is critical that you attach the red wire on the
5-wire entertainment option cable to Pin 1. The word, PIN 1, is
inscribed on the back of the display console. An arrow points
to the location of Pin 1. The connector is keyed so it will only
connect one way. Do not force the connection.
Figure 15: Audio cable routing
24
Installing and Operating the Personal Viewing System (PVS) for Display C
3. Connect the 5-wire entertainment option cable to the
display console. See above figure.
4. Reattach the display console face by aligning the tabs and
applying pressure to the display face. Make sure the audio
cable has a little slack in the "pocket" to ensure it stays in
place.
Figure 16: Display console face attachment
5. Install the integrated controller by aligning the two tabs
and applying pressure. Arrange the cables so you do not
inadvertently pinch or damage the cables.
Important: Cable damaged by improper installation will not
be covered by the Limited Warranty.
Figure 17: Integrated controller attachment
6. If you purchased the optional Personal Entertainment
Player (PEP) feature, attach the RCA cable to the RCA
video connector on the back of the integrated controller.
Figure 18: RCA cable attachment
25
Beginning the Assembly
Installing the Headphone Jack
To install the headphone jack:
1. Feed the audio cable through the base of the display
console and attach it to the headphone jack.
Figure 19: Audio cable routing
2. Insert the headphone jack into the base of the display
console. Snap the headphone jack into place by
positioning the rear tab first, and then applying pressure
to the base.
Figure 20: Headphone jack attachment
3. Attach the ferrite clamp on the audio cable to the display
console, near the headphone jack on the left side.
4. Gather the cables together, including the RCA cable for
the optional PEP feature if purchased, and align the cables
along the neck of the integrated controller.
26
Installing and Operating the Personal Viewing System (PVS) for Display C
5. Hold the cables out of the way as you slide the bracket
into position and align the four mounting holes. Insert four
buttonhead screws and wrench tighten using a ⁵⁄₃₂�inch
hex key.
Figure 21: PVS bracket positioning
6. Attach the transition cover. Insert the base of the cover
first and apply pressure to the upper portion. It should
easily snap it into place.
Figure 22: Transition cover attachment
27
Beginning the Assembly
Attaching the PVS to the EFX
To attach the PVS to the EFX:
1. Place the screen face down on a clean work surface so
you have easy access to the back plate. Remove the screw
at the top of the PVS cover and set it aside.
Figure 23: Back plate screw location
2. Place your fingers at the base of the panel and pull up to
remove it. Set the back plate aside.
Figure 24: Back plate removal
3. Move the cables out of the way as you attach the screen
to the bracket using four buttonhead screws. Finger
tighten and then wrench tighten using a ⁵₃₂-inch hex key.
28
Installing and Operating the Personal Viewing System (PVS) for Display C
4. Connect the following cables:
Figure 25: Cable locations
Table 4. Attaching the cables
Number Cable
Function
Power cable
Turn the end of the cable connector to
secure it.
RJ45 cable
Plug the RJ45 cable into the back of the
screen. Attach the ferrite clamp on the
RJ45 cable to the back of the screen,
near the base.
Coaxial cable
A narrow (adapter) coaxial cable is
pre-attached to the PVS. From the
controller, feed the main coaxial cable
between the back of the screen and the
bracket. Turn the end of the cable
connector to secure the two cables
together.
RCA cable
Plug the RCA cable into the RCA video
connector on the back of the PVS screen.
29
Beginning the Assembly
5. Replace the back plate. Insert the base tabs first and then,
apply pressure to engage the side tabs. Replace the
Phillips-head screw.
Note: You may want to test the PVS before replacing the
back plate. Refer to Testing the PVS in the following
section before you complete the PVS assembly.
Figure 26: Back plate reattachment
6. Reassemble the display console by using a Phillips-head
screwdriver to reattach the front and back covers (eight
screws) and reinstall the back console plate (four
screws).
Testing the PVS
To test the PVS:
1. At the base of the EFX, plug the power cable to the power
extension module and connect it, along with the coaxial
cable, into the strip provided for Cardio Theater
equipment.
2. Observe whether the PVS (screen and integrated
controller) is receiving power while you configure the
channels using the integrated controller and check the
audio connection. For instructions on how to configure
channels and troubleshoot the PVS, refer to the
appropriate PVS operation and maintenance guide
provided in the box.
Note: A green LED illuminates on the integrated controller
when it is connected to a power source.
30
Installing and Operating the Personal Viewing System (PVS) for Display C
Treadmill: Rewiring the Equipment
CAUTION: Turn OFF the treadmill and unplug it. The ON/OFF
(I/O) switch is located on the front of the treadmill beneath the
hood overhang.
Important: Unplug any RJ45 connections from the back of the
display console cover before removing the cover.
Perform the assembly steps in the order presented. As you
remove the screws, set them aside in a safe place. You will
need them again later to complete the assembly
To expose the wiring and connections inside the display
console and install the PVS:
1. Use a Phillips-head screwdriver to remove the nine
screws that secure the display console back cover. Set the
fasteners aside.
Figure 27: Console back cover removal and replacement
31
Beginning the Assembly
2. To remove the display console back cover, pull in on one
side as you pull the cover down toward the floor. This
should flex the cover and enable you to slide it past the
fasteners on the upright support.
Figure 28: Back console removal
3. Remove the entertainment option cover. Tabs exist on
either side of the cover. Press the tabs to release the
cover. You can discard the entertainment option cover.
Figure 29: Entertainment option cover removal
32
Installing and Operating the Personal Viewing System (PVS) for Display C
4. At the base of the display console back cover, remove the
snap-out tab to allow room for the audio cable. Use a
flathead screwdriver to push the tab out of the display
console back cover. You can discard the snap-out tab.
Figure 30: Snap-out tab removal
Installing the Cables and PVS Bracket
To make it easier to feed the cables through the equipment
frame, tape the ends of the cables together (the coaxial
connection to the power cable).
Figure 31: Cable taping
33
Beginning the Assembly
To install the new cables:
1. Feed the taped cables through the large, rectangular
opening at the top of the display console. Continue to
feed the taped cables down through the upright support,
following the same route as the existing RJ45 cable.
Note: Leave about 1 foot (30 cm) of cables hanging out of
the upper portion of the display console. The coaxial and
power connections will be attached to the back of the
screen.
Figure 32: Cable route through upright
2. Pull the taped cables out of the base of the upright
support and onto the floor.
CAUTION: Be careful as you slide the bracket into position
and align the mounting holes. Avoid sliding the bracket into
the STOP button housing as damage can occur to the
electronics board.
Figure 33: Cable position at base
34
Installing and Operating the Personal Viewing System (PVS) for Display C
3. For the treadmill only, slide the screen mount down
through the upper frame of the treadmill and position the
universal PVS bracket below it.
Figure 34: Bracket and screen mount position
4. Hold the cables out of the way and slide the bracket onto
the screen mount. Align the two back and two side
mounting holes.
Figure 35: Screen mount to bracket attachment
35
Beginning the Assembly
5. Insert six buttonhead screws to attach the bracket to the
screen mount and wrench tighten using a ⁵₃₂-inch hex
key.
CAUTION: Avoid touching the heart rate cable or the heart
rate electronics board. Cable connections can become
dislodged which will impair the heart rate and upper display
functions.
Figure 36: Position of fasteners
6. Insert two buttonhead screws into the two mounting
holes near the top of the screen mount neck and wrench
tighten using a ⁵₃₂-inch hex key.
Figure 37: Screen mount attachment
36
Installing and Operating the Personal Viewing System (PVS) for Display C
Attaching the Entertainment Option
CAUTION: Do not try to access the tab found beneath the heart
rate electronics board.
To attach the entertainment option:
1. Separate the display console face from the console. Start
at the top and work toward the bottom, pressing the five
tabs to release it. This provides easier access to the 5-pin
connector.
Figure 38: Display console face separation
2. Hold the integrated controller above the display console.
Feed the audio cable up through the opening in the top of
the display console and connect it to the integrated
controller. Let the end of the audio cable with the ferrite
clamp hang loose for now.
CAUTION: It is critical that you attach the red wire on the
5-wire entertainment option cable to Pin 1. The word, PIN 1, is
inscribed on the back of the display console. An arrow points
to the location of Pin 1. The connector is keyed so it will only
connect one way. Do not force the connection.
Figure 39: Audio cable attachment
37
Beginning the Assembly
3. Connect the 5-wire entertainment option cable to the
display console.
Figure 40: Entertainment option cable connections
4. Reattach the display console face by aligning the tabs and
applying pressure to the display face.
Important: Rest the integrated controller on top of the display
console while you realign the cables and install the transition
cover. The transition cover must be installed before you can
attach the integrated controller.
5. Attach the transition cover by inserting the base of the
cover first and then applying pressure to the upper
portion. It should snap easily into place.
Figure 41: Transition cover attachment
38
Installing and Operating the Personal Viewing System (PVS) for Display C
6. Install the integrated controller by aligning the two tabs
and applying pressure. Arrange the cables so you do not
inadvertently pinch or damage the cables.
Important: Cable damaged by improper installation will not
be covered by the Limited Warranty.
Figure 42: Integrated controller attachment
7. If you purchased the optional Personal Entertainment
Player (PEP) feature, attach the RCA cable to the RCA
video connector on the back of the integrated controller.
Attaching the PVS to the Treadmill
To attach the PVS to the treadmill:
1. Place the screen face down on a clean work surface so
you have easy access to the back plate. Remove the screw
at the top of the PVS cover and set it aside.
Figure 43: Back plate screw location
39
Beginning the Assembly
2. Place your fingers at the base of the panel and pull up to
remove it. Set the back plate aside.
Figure 44: Back plate removal
3. Gather the cables together, including the RCA cable for
the optional PEP feature if purchased, and align the cables
along the neck of the integrated controller.
4. Fit the mounting bracket against the back of the PVS.
Move the cables to ensure they are not pinched. Secure
the PVS using four buttonhead screws. Finger tighten and
then wrench tighten using a ⁵₃₂-inch hex key.
Figure 45: Screen to bracket attachment
40
Installing and Operating the Personal Viewing System (PVS) for Display C
5. Plug the RJ45 cable into the back of the screen. Attach
the ferrite clamp on the RJ45 cable to the back of the
screen, near the base. Feed the coaxial cable between the
back of the screen and the bracket. Connect both the
power and coaxial cables to the proper receptacles. Turn
the ends of the coaxial and power connectors to properly
secure the cables.
Figure 46: Cable connections
6. If you purchased the optional PEP feature, plug the RCA
cable into the RCA video connector on the back of the
PVS screen.
Installing the Headphone
To install the headphone jack:
1. Feed the audio cable through the break out in the display
console cover.
Figure 47: Audio cable path
41
Beginning the Assembly
2. Attach the ferrite clamp on the audio cable to the display
console near the headphone jack, being sure to allow
enough slack to attach the headphone jack.
3. Replace the display console back cover by positioning one
side above the upright support fasteners. Pull in on the
other side to flex the cover which allows you to push it up
and slide it past the fasteners on the upright support.
Figure 48: Display console back cover replacement
4. Use a Phillips-head screwdriver to reattach the display
console back cover with the nine fasteners removed
earlier.
Figure 49: Console back cover removal and replacement
42
Installing and Operating the Personal Viewing System (PVS) for Display C
5. Attach the stereo plug to the headphone jack.
Figure 50: Stereo plug attachment
6. Insert the headphone jack into the base of the display
console. Snap the headphone jack into place by
positioning the rear tab first, and then applying pressure
to the base.
Figure 51: Headphone jack attachment
7. Replace the back plate. Insert the base tabs first, and then
apply pressure to engage the side tabs. Replace the
Phillips-head screw.
Note: You may want to test the PVS before replacing the
back plate.
Figure 52: Back plate attachment
Beginning the Assembly
43
Testing the PVS
To test the PVS:
1. At the base of the treadmill, plug the power cable into the
power extension module and connect it, along with the
coaxial cable, into the strip provided for Cardio Theater
equipment.
2. Observe whether the PVS (screen and integrated
controller) is receiving power while you configure the
channels using the integrated controller and check the
audio connection. For instructions on how to configure
channels and troubleshoot the PVS, refer to the
appropriate PVS operation and maintenance guide
provided in the box.
Note: A green LED illuminates on the integrated controller
when it is connected to a power source.
44
Installing and Operating the Personal Viewing System (PVS) for Display C
Chapter
2
Setting Up the PVS
Note: The information provided in this section is intended for
system administrators and registered service technicians.
Please do not share it with equipment users or
non-administrative staff.
Use the System setting mode to configure equipment settings
in ways that benefit your users and your facility. Because a
special code is required to gain access to these settings, only
equipment administrators and registered service technicians
can see them. Changes made to these settings are stored in
the equipment, allowing them to persist after a loss of power.
46
Installing and Operating the Personal Viewing System (PVS) for Display C
The keys on the console cap are used as labeled by users, but
they have different functions if you are an administrator
setting up the PVS.
Figure 53: Standard PVS
Figure 54: PVS with PEP
Number Key Name
Function During System Setup
Mute
Move up a menu level
Volume Up/Down
Change a value in a subcategory
Power On/Off
Select a category
Channel Up/Down
Move from one category to
another or from one
subcategory to another
TV/iPod (PEP only)
None
About PVS System Settings
Master Reset Programming
After you install the PVS hardware and complete all power
and cable/antenna connections, the controller must be
programmed to support the TV. To perform a master reset,
buttons must be pushed in sequence. Two buttons together
indicate that those buttons need to be pressed
simultaneously and held for a minimum of 3 seconds.
47
Setting Up the PVS
To initiate a Master Reset, perform the following process:
Master Reset programming quick keys
Number Action
Press Power
Result
Turns on the TV.
Plug headphones Choose and display an analog or a
into the controller. digital channel. Digital channels display
separated by a dash and analog
Press Channel Up
channels do not contain a dash.
or Channel Down
Press Channel Up Flashing LED on the controller indicates
and Volume Up
programming device mode and the
mute icon appears.
Press Power
Resets the factory defaults. The volume
bar appears indicating a master reset
has occurred.
Press Power and
Volume Up
Flashing LED on the controller indicates
entry into the programming mode.
When the Mute icon appears on the
TV, release the buttons.
Set to Channel 4
Programs the controller for the Dual
Tuner PVS 15.
48
Installing and Operating the Personal Viewing System (PVS) for Display C
HP (Headphone) AutoPower
This feature shuts the power off to the PVS when headphones
are unplugged from the jack.
Auto Power controller quick keys
Number Action
Result
Press Channel Up and
Volume Up together.
The mute icon appears.
Press Channel Up or
Channel Down
Press Channel Up to turn this
feature On.
Press Channel Down to turn this
feature Off.
Note: The volume bar appears
indicating the setting has been
accepted.
49
Setting Up the PVS
Closed Caption with Hp Detection
This feature activates Closed Caption when headphones are
unplugged from the jack.
Headphone detection controller quick keys
Number Action
Result
Press Channel Up and
Volume Up together.
The mute icon appears.
Press Volume Up or
Volume Down
Press Volume Up to turn this
feature On.
Press Volume Down to turn this
feature Off.
Note: The volume bar appears
indicating the setting has been
accepted.
50
Installing and Operating the Personal Viewing System (PVS) for Display C
Viewing the System Settings
There are five System Settings categories:





Picture
Sound
Clock
Password
Setup
To view the System settings on the setup menu:
1. Press Power On/Off to turn on the PVS.
The power light is green when the PVS is on.
2. Hold the Channel Down key, the Volume Down key at the
same time for three seconds.
The System settings menu should appear and the power
light should flash green, indicating that you are in the
System setting mode.
Note: If you do not press a button within 15 seconds, the
PVS screen returns to the normal viewing mode.
While you are in the System setting mode, use the keys on
the console cap to navigate through the setup menus and
make selections as discussed earlier in this section.
Configuring the Picture Settings
Use the Picture settings to change the television (TV)
appearance.
Table 5. Picture settings
Setting
Values
Default Value
Contrast
0 - 100
50
Brightness
0 - 100
50
Color
0 - 100
62
Sharpness
0 - 24
12
Tint
0 - 100
50
Aspect Ratio
Default
Default
16:9
4:3
51
Setting Up the PVS
Configuring the Sound Settings
Use the Sound settings to adjust the sound setup for the PVS.
Table 6. Sound settings
Setting
Values
Default
Value
Equalizer
Movie
Personal
Music
Personal
Voice
Balance
Right to Left
Middle
AVL (Automatic Volume
Level)
On/Off
Off
Stereo/SAP
Stereo
Stereo
SAP
Mono
Audio Mode
English
Mandarin (Chinese)
Korean
Japanese
Italian
German
French
Spanish
English
52
Installing and Operating the Personal Viewing System (PVS) for Display C
Configuring the Clock Settings
Use the Clock settings to change the time and date, and to
program the Sleep Timer.
Table 7. Clock settings
Setting
Values
Default Value
Sleep Timer
Off
Off
30 minutes
60 minutes
90 minutes
120 minutes
Time Set
Date
Preset at factory
Time
Time Zone
Time Zone values
(GMT) London
Note: The date and time settings are preset at the factory and
cannot be changed. Selecting the correct time zone provides
the proper time display for your location.
53
Setting Up the PVS
Configuring the Parental Control Settings
Use the settings in the Parental Control menu to block the
display of television programs that are not appropriate for
your facility. You must enter the default password (1 1 1 1) to
enter this menu.
To enter the password:
1. Press the Channel Up/Down keys to select the first digit.
2. Press the Power On/Off key to enter the digit.
3. Repeat steps 1 and 2 to select and enter the remaining
three digits.
Table 8. Parental Control settings
Setting
Purpose
Values
Default
Value
Parental
Lock
Activates the Parental
Control feature and
optionally specifies a
preset permission
level.
Off
Off
On (default
settings)
Custom Settings
Adult (preset level)
Youth (preset level)
Child (preset level)
Change
Password
Provides the ability to
modify the Parental
Control password.
Important: You must
enter the new password
in both fields to put it
into effect.
New Password
Confirm Password
1111
54
Installing and Operating the Personal Viewing System (PVS) for Display C
Setting
Purpose
Values
Default
Value
MPAA
Specifies the minimum
MPAA (Motion
Picture Association of
America) rating that
Parental Control
blocks.
X
Off
NC-17
R
PG-13
PG
G
Off
US
Ratings
Specifies the
American broadcast
TV ratings that
Parental Control
blocks.
TV-Y
TV-Y7
TV-G
TV-PG
Selecting one rating
TV-14
also selects the other TV-MA
ratings whose content
is included in it; for
example, selecting
TV-PG also selects
TV-14 and TV-MA.
Likewise, clearing a
rating also makes the
lower ratings
available; for example,
clearing TV-14 also
clears TV-PG and
TV-G.
Note: Selecting TV-Y
or TV-Y7
automatically clears
all ratings of TV-G and
higher. Selecting any
rating of TV-G or
higher automatically
clears TV-Y and
TV-Y7.
TV-PG
and higher
55
Setting Up the PVS
Setting
Purpose
Values
Default
Value
Canadian
Ratings
Specifies the minimum English:
Canadian broadcast
18+
TV rating that Parental
14+
Control blocks.
PG
Note: In Canada,
English:
Off
separate sets of
ratings are used for
English and French
programming.
French:
Off
G
C8+
C
Off
French:
18 ans +
16 ans +
13 ans +
8 ans +
G
Off
Reset All
Select to restore all
Parental Control
settings to the factory
defaults.
Configuring the PVS Setup Menu
There are eight System Setup categories. Configure the
detailed subcategories under each setting to create default
settings that benefit your users. The categories are as follows:






Channel
Input Selection
Auto Power On
Caption
Menu Language
Reset
56
Installing and Operating the Personal Viewing System (PVS) for Display C
Channel Settings
The Channel settings are designed to search for TV channels
and use them to create a channel list. The Channel settings
are as follows:





Tuning Band
Auto Channel Search
DTV Signal Strength
Manual Program
Tuning Cable Mode
Table 9. Channel settings
Setting
Purpose
Tuning Band
Allows selection of cable or antenna input
Auto Channel
Search
Finds all available analog and digital stations
DTV Signal
Strength
Displays signal strength for digital TV signals
Manual Program
Removes weak or undesirable TV stations from
the list of channels available to the user
Tuning Cable
Mode
Specifies the frequency tuning mode used if
cable input is selected:
•
Standard (Cable-STD)
•
Harmonically Related Carrier (Cable-HRC)
Input Selection
The Input Selection offers a choice of TV or Video.
Auto Power On
If power to the PVS is interrupted while this setting is On, the
PVS activates itself automatically and returns to the last
selected channel when power is restored.
Caption
The Caption setting specifies which Closed Captioning or
teletext channel should be displayed on the screen. To
deactivate Closed Captioning, select Off.
Menu Language
Select the appropriate language for your users.
57
Setting Up the PVS
Reset
Select Reset to return all System settings to their default
settings.
Troubleshooting the PVS
Use this section to troubleshoot issues with PVS functionality.
Table 10. Troubleshooting
Issue
What to Do
No power
•
•
•
No Closed Captioning
•
•
Closed Captioning is
delayed or garbled
•
•
No picture
•
•
•
•
Make sure the power light is lit on the
console cap.
Check the power adapter to see if the
green power light is lit.
If the Automatic Power On/Off
feature is enabled, connect
headphones to the jack.
Make sure Caption is On under the
Caption feature in the System
settings.
Closed Captioning may not be
available on the current channel.
Check a different channel to see
whether Closed Captioning works
properly there.
Keep in mind that a short delay
between audible dialogue and closed
captioning is common in live
broadcasts.
If reception or signal strength is poor,
it can cause caption text to appear
incorrectly. Check a different channel
to see whether Closed Captioning
works properly there.
Make sure the PVS screen is fully
plugged into a power outlet.
Push the Power On/Off button.
Try a different channel to rule out
problems with the channel provider.
Turn the PVS screen off, and then turn
it back on after one minute.
58
Installing and Operating the Personal Viewing System (PVS) for Display C
Issue
Poor picture (across all
channels and other
sources)
No audio
What to Do
•
•
•
•
Poor audio
•
•
•
Bars on screen
•
•
•
•
Poor TV reception
•
•
•
•
•
Adjust controls such as Brightness,
Color, and Sharpness under the
Picture settings.
Increase the audio level with the
Volume Up key.
Test the headphone jack and replace
it if necessary.
Make sure you are not in
programming mode.
Re-insert the plug into the headphone
jack.
Try moving the plug in the jack to see
if the sound improves.
Replace the headphone jack if
necessary.
Try a different channel to rule out
problems with the channel provider.
Make sure the thin coaxial cable is
securely to the connector on the back
of the PVS.
Make sure the main television cable is
securely connected to the thin coaxial
cable.
Check for sources of local
electromagnetic interference.
Adjust Sharpness under the Picture
settings.
Try a different channel to rule out
problems with the channel provider.
Make sure the thin coaxial cable is
securely to the connector on the back
of the PVS.
Make sure the main television cable is
securely connected to the thin coaxial
cable.
Check for sources of local
electromagnetic interference.
59
Setting Up the PVS
Issue
What to Do
Ghost images in picture •
•
•
•
iPod content cannot be
heard or viewed
through the PVS
(PEP-equipped models
only)
•
Try a different channel to rule out
problems with the channel provider.
Make sure the thin coaxial cable is
securely to the connector on the back
of the PVS.
Make sure the main television cable is
securely connected to the thin coaxial
cable.
Check for sources of local
electromagnetic interference.
Check that the connection between
the iPod device and the PVS is secure.
If a protective cover is installed on the
device, remove the cover and
reconnect the device.
Note: You must remove the back
cover of the console cap to perform
the following tasks.
•
•
•
Verify that the green LED on the iPod
interface board lights up when an iPod
device is connected to the PEP. If not,
verify that the power cable is securely
connected to the iPod interface board.
Check to make sure that the iPod
interface cable is securely connected,
properly grounded, and not worn or
damaged.
If the green LED lights up, verify that
the two-wire cable between the two
circuit boards in the cap is intact and
is connected properly.
60
Installing and Operating the Personal Viewing System (PVS) for Display C
Issue
What to Do
Users can select the
•
iPod device for viewing,
but no video from the
device appears on the
screen (PEP-equipped
models only)
•
•
Check that the connection between
the iPod device and the PVS is secure.
If a protective cover is installed on the
device, remove the cover and
reconnect the device.
Note: You must remove the back
cover of the console cap to perform
the following tasks.
Check both ends of the RCA
audio/video cable. Make sure they are
connected properly and securely.
Check to make sure that the iPod
interface cable is securely connected,
properly grounded, and not worn or
damaged.
Chapter
3
About the Personal
Entertainment Player (PEP)
The Personal Entertainment Player (PEP) option for the PVS
allows your members to integrate their iPod with the exercise
equipment and the PVS during their workouts. While your
members are using the PEP, they can do the following things:
Listen to their music collections
Use the PVS screen to watch their video clips
Upload their workout statistics to Nike.com
The following table lists the iPod models that the PEP
supports, and shows what kinds of information the PEP can
exchange with each model.



Table 11. iPod devices supported by the PEP
Device Model
Audio output
Audio and
video
iPod Touch®
x
x
iPod Touch® (2nd
generation)
x
x
iPod Touch® (5th
generation with video)
x
x
iPod Classic
x
x
iPod nano®
x
iPod nano® (2nd
generation)
x
iPod nano® (3rd and
4th generation)
x
x
Nike+®
x
x
62
Installing and Operating the Personal Viewing System (PVS) for Display C
Using the PVS and the PEP
The following procedures discuss how to use the Personal
Viewing System (PVS) and its Personal Entertainment Player
(PEP) option. Refer to them to help clarify PVS and PEP
operation for your members as needed.
To watch TV:
1. If necessary, press the Power On / Off key.
2. Plug your headphones into the headphone jack on the
exercise equipment.
3. Use the PVS controls to adjust playback.
If you want to ...
Use ...
Adjust the volume
The Volume Up and Volume Down keys
Mute the sound
The Mute key
Change channels
The Channel Up and Channel Down keys
Switch between TV and The Source key
an iPod device
To use your iPod device with the PEP:
1. If necessary, press the Power On / Off key.
2. Plug the iPod connector into your iPod.
Important: If the connector does not make proper contact
when you first plug it in, your device may display a diagnostic
message that it will not work with the attached accessory. If
this happens, unplug the connector, wait two seconds, and try
again.
The PEP charges the device while it is connected. If the device
does not have enough battery power left to support playback,
your music or video will begin to play after the batteries in the
device are sufficiently charged.
3. Plug your headphones into the headphone jack on the
device.
Note: You can also connect your headphones to the
headphone jack on the console during your workout. If
you choose to do so, use the Volume Up, Volume Down,
and Mute keys on the PVS to adjust the volume.
4. Select the song, playlist, or video segment you want to
play, then press the Play button on the device.
Note: While you are working out, keep your iPod device
resting flat in the tray on the PVS. This protects the device
from vibration and movement.
63
About the Personal Entertainment Player (PEP)
5. During your workout, use the device controls or the PVS
controls to adjust playback.
If you want to ...
Use ...
Adjust the volume
The Volume Up and Volume Down
buttons on either the PVS or the
device.
Skip to the previous (or
next) track or video
segment
The track controls on the device.
Pause playback
The Pause button on the device.
Resume playback
The Play button on the device.
Replacing the iPod Cable
If the 30-pin connector can no longer maintain a reliable
connection with iPod, you may need to replace the iPod cable.
To replace the iPod cable:
1. Align the 30-pin connector with the opening on the front
side of the tray and slide the connector out.
Figure 55: Slide out the connector
64
Installing and Operating the Personal Viewing System (PVS) for Display C
2. Use a small flathead screwdriver to depress the tab on the
tray mount and slide the tray off the tray mount.
Figure 56: Location of tab on tray mount
3. Remove the tray mount using a Phillips-head screwdriver.
Figure 57: Tray mount removal
4. Pull firmly on the cable end attached to the PEP to
remove it.
Figure 58: Cable removal
About the Personal Entertainment Player (PEP)
65
5. Slide the white connector end of the new cable through
the tray and attach it to the receptacle in the PEP. You
should hear an audible click from the connector when it
snaps securely into place.
6. Reattach the tray mount making sure to position the cable
stopper inside the groove in the opening as shown in the
illustration.
Figure 59: Reattach tray mount
7. Slide the tray into place. You should hear an audible click
when it snaps securely into place.
66
Installing and Operating the Personal Viewing System (PVS) for Display C
Chapter
4
Maintenance
To keep the equipment functioning properly, perform the
minor maintenance tasks in this section at the intervals
suggested. Failure to maintain the equipment as described in
this section could void the Precor Limited Warranty.
DANGER
To reduce the risk of electrical shock, always
disconnect the equipment from its power source
before cleaning it or performing any maintenance
tasks. If the equipment uses an optional power
adapter, disconnect the adapter.
Cleaning the PVS Screen
Precor recommends that you clean the PVS at least one time
per day.
To remove dust and dirt from the PVS:
 Use a clean, soft, lint-free cloth moistened with isopropyl
alcohol solution to remove dust, dirt, and fingerprints
from the screen surface. The alcohol solution may range
in strength from a 1:1 solution (total concentration
between 45% and 50%) to a typical full-strength solution
(normally 91% to 99%). You may also use commercially
available isopropyl alcohol solutions within this range, or
flat-screen cleaning wipes moistened with isopropyl
alcohol.
68
Installing and Operating the Personal Viewing System (PVS) for Display C

Wipe all other exposed surfaces with a soft cloth that you
have moistened with a mixture of mild soap and water.
Precor recommends a solution of 30 parts of water to 1
part of Simple Green® (for more information, visit
www.simplegreen.com).
Important: Do not use any acidic cleaners. Doing so will
weaken paint, powder coatings, and other surface finishes and
will void the Precor Limited Warranty. Never pour water or
spray liquids directly onto the screen.
Avoid using any corrosive chemicals on the console or
screen.
Always clean the screen with a pre-moistened wipe or
cloth. To prevent drips from seeping into the screen or
console enclosure, never spray cleaning liquid directly
onto the screen.
Apply cleaners with a soft, lint-free cloth. Avoid using
gritty cloths.
Chapter
5
Limited Warranty for Precor
Entertainment Products
PLEASE READ THESE WARRANTY TERMS AND CONDITIONS CAREFULLY BEFORE
USING YOUR PRECOR PRODUCT. BY USING THE EQUIPMENT, YOU ARE CONSENTING
TO BE BOUND BY THE FOLLOWING WARRANTY TERMS AND CONDITIONS.
Limited Warranty.
Precor Incorporated (“Precor”) warrants all new Precor products to be free from
defects in materials and manufacture for the warranty periods set forth below. The
warranty periods commence on the invoice date of the original purchase. This
warranty applies only against defects discovered within the warranty period and
extends only to the original purchaser of the product. Parts repaired or replaced under
the terms of this warranty will be warranted for the remainder of the original warranty
period only. To claim under this warranty, the buyer must notify Precor or your
authorized Precor dealer within 30 days after the date of discovery of any
nonconformity and make the affected product available for inspection by Precor or its
service representative. Precor product deemed defective by a Precor representative,
will be issued a return authorization number. Precor will not accept returns without
a return authorization number. Precor reserves the right, at their option, to repair or
replace the product after verification of defect. Product that fails after the warranty
period expires will be repaired or replaced at the current part and labor pricing after
authorization from the customer. Repairs are warranted for 90 days.
70
Installing and Operating the Personal Viewing System (PVS) for Display C
Precor’s obligations under this warranty are limited as set forth below.
Warranty Periods and Coverage.
Cardio Theater Transmitters
xTV-T Wireless or Wired Floor Models
xTVFM system transmitter
3 Years
Parts & Labor
Cardio Theater Non-integrated Receivers
xTV-R Wireless or Wired Upper Models
xTVFM system receiver
1 Year
Parts & Labor
Cardio Theater 15" Non-integrated PVS and
Controller
1 Year
Parts & Labor
Precor Experience Series Integrated 12" and 15"
Screens
2 Years
Parts & Labor
Precor Experience Series Integrated Receiver
2 Years
Parts & Labor
Headphone Jack, USB Port, and iPod® Connector
90 Days
Parts Only
Conditions and Restrictions.
This warranty is valid only in accordance with the conditions set forth below:
The warranty applies to the Precor product only while
It remains in the possession of the original purchaser and proof of purchase is
demonstrated,
 It has not been subjected to accident, misuse, abuse, improper service, or
mechanical, electrical or non-Precor modification.
 Claims are made within the warranty period.
This warranty does not cover damage or product failure caused by electrical wiring
not in compliance with electrical codes or Precor owner’s manual specifications, or
failure to provide reasonable and necessary maintenance as outlined in the owner’s
manual.

Precor does not pay for labor outside of the United States and Canada.
Warranties outside the United States and Canada may vary. Please contact your local
Dealer for details.
71
Limited Warranty for Precor Entertainment Products
This Limited Warranty shall not apply to:
1. Software version upgrades.
2. Normal wear and tear, consumables and cosmetic items, including, but not
limited to the following: labels.
3. Repairs performed on Precor products missing a serial number or with a serial tag
that has been altered or defaced.
4. Service calls to correct installation of the product or instruct owners on how to
use the product.
5. Pickup and delivery involved with repairs.
6. Any labor costs incurred beyond the applicable labor warranty period.
7. The user is cautioned that changes or modifications not expressly approved by
the manufacturer of the product could void the user’s authority to operate the
product.
Effective 01 December 2010
P/N 301650-101
72
Notes:
Installing and Operating the Personal Viewing System (PVS) for Display C
Installing and Operating the
Personal Viewing System
(PVS) for Display C
Including Model with Personal
Entertainment Player (PEP)
Precor Incorporated
20031 142nd Avenue NE
P.O. Box 7202
Woodinville, WA USA 98072-4002
PVS for Display C OAM CW30632-101 rev A, en
Warranty P/N 301650-101
August 2012
Download PDF
Similar pages
Previsite PVS 7030
SOLUTIONS 810 Line
3M PX5 Product Sheet
natural motion meets ingenuity.
treadmill - PR Fitness Equipment