Eureka2 DDR2 SODIMM 800 Mhz
Innovative Memory Tester
CST Inc, a leading worldwide manufacturer of
memory tester and automatic Handler is proud
to introduce the new Eureka-II Memory Tester,
specifically designed for high volume memory
distributor, memory module manufacturers,
and memory repair service centers
New DDR2-Fault
Focusing Algorithm
& DC Parametric Test
The Eureka-II DDR2 Tester support the
standard 200pin SODIMM socket for testing
the latest PC2-3200,PC2- 4300,PC2-5300, PC26400 DDR2 memory modules at “Real Bus
Speed” and “Real Cycle Time”.
The Eureka-II DDR2 tester is designed and
built with a flexible architecture which can
support testing DDR, DDR2, DDR3 DIMM
memory module with a change of optional
Test Adapters.
Eureka2 DDR2 Feature
Eureka2 DDR2 Technical Specification
Auto Identify:
Memory Type: Registered or Unbuffered
Memory Configuration
Memory Size
Memory Frequency
Memory Latency
ECC or Non-ECC
Clock Frequency
Data-rate
Address depth
Data width
Voltage range
ICC measurement
CAS Latency
Trcd & Trp Adjustment
Burst Length
Write Latency
ODT Adjustment
OCD Calibration
Refresh Cycle
DC Parametric Testing
DC Test Pattern
Real Bus Speed Testing
Real Cycle Time
Super Fast Test time( 512MB in 6secs)
OVERCLOCKING Capability up to 950 Mhz
Effective Test Algorithm
Quick test, checks for assembly faults
20 Types of March test Pattern , to check for
functional failures
Programming and checking SPD
Fault Focusing pinpoints to faulty BGA chip
DC Parametric/Leakage Test
Advanced Feature.
Intuitive User PC Interface Software
User configurable Test Pattern
Auto-Speed Sorting Tool
SHMOO-Plot and Error Mapping Tool
- Auto Timing Setup
- Current measurement
- Programmable DDR2 AC Parameters
Ez Upgrading
Firmware upgrade via internet
Support RoboFlex1 and RoboFlex2 Handler
- Interface with PC software via USB Port
AC Test Pattern
SPD Programming
: 200, 266, 333 & 400 Mhz selectable
: 400,533,667 & 800 Mhz
: 4 Giga-word ( 16 Row x 16 Col)
: Expandable 64 & 72 bit
: 1.3 to 2.5V with 50mV increment
: IDD 0 – IDD7
: 3, 4 ,5 & 6 Clocks
: 3, 4 ,5 & 6 Clocks
:4&8
: 2 & 3 clock
: 50, 75 ,150 ohm and Auto
: Auto Calibration
: Auto / Self Refresh
: +/- 1 uA to 5mA
: Walk Data , Walk Address , DQS,
DQM, CKE, CS , and BA test
: Mat-S, March-C, March-X,
March Y( 23 Type March Pattern)
: Read/Write & Editable Byte 0 – 255
Reversible SPD Write Protect
General Specification
Single Site
DDR2 Test Adapter
: 240 Pin DDR2 DIMM (Standard)
: 200 Pin DDR2 SODIMM (Optional)
60/84/92 Ball BGA Chip Adapter
Power Adapter
: Input 100 /250 Vac, 50 /60Hz ATX
Operating Temperature : 15 ~110 Degree F
Host PC ( Not included) : AMD or Intel P4 via USB interface
Operating System
: Microsoft Win98/2000, XP,Vista
CST Inc , 2336 Lu Field Road , Dallas Texas 75229 Tel : (972) 2412662 Fax : (972) 2412661
www.simmtester.com
Email : info@simmtester.com