1 2. Installation of USB 2.0 Ethernet Adapter under Windows XP.

Index
1. Introduction…………………………………………. 1
2. Installation of USB 2.0 Ethernet Adapter under
Windows XP..………………..……………………..... 2
3. Installation of USB 2.0 Ethernet Adapter under
Windows Vista / 7….……..…………………………. 7
Introduction
Thank you for purchasing the USB 2.0 Ethernet Adapter. USB 2.0 Ethernet
Adapter offers the most convenient and efficient way to connect with a
laptop or desktop computer to an Ethernet network. Make the connection
as easy by plugging one end of the cable into the RJ45 receptacle of the
Ethernet Adapter and the other end into one port of the supporting hub. It
is compliant with the USB 2.0 & 1.1 and supports 10/100Mbps Fast
Ethernet.
SYSTEM REQUIREMENTS
◎ Windows XP / Vista / 7
◎ One available USB port
PACKAGE CONTENTS
◎ USB 2.0 Ethernet Adapter x 1
◎ Driver / Manual CD x 1
◎ Quick Installation Guide x 1
LED INDICATOR
◎ Green: Activity
◎ Orange: Link
NOTES:
◎ Do not plug the USB 2.0 Ethernet Adapter into the system before the driver
installation is completed.
◎ Please refer to your Internet Service Provider (ISP) instructions to setup your
Internet connection.
1
Installation of USB 2.0 Ethernet Adapter under Windows XP
„ Software Installation
Step 1.
Insert the Driver/Manual CD to start the installation (or double click the
“setup.exe”).
Step 2.
Click “ Next “ to continue.
Step 3.
Select “ Yes, I want to restart my
computer now” and click “Finish”
to complete setup.
※ After reboot you can connect the USB2.0 Ethernet Adapter with your
computer.
2
„ INSTALLATION CONFIRMATION
●
To make sure you have installed the USB 2.0 Ethernet Adapter successfully,
please move the cursor to “Start” Æ “Setting” Æ “Control Panel” Æ “System”
Æ “Hardware” Æ “Device Manager”.
● Double click “Network Adapters” and it will show the “LAN9500 USB 2.0 to
Ethernet 10/100 Adapter (SAL10)”.
Congratulations!! You succeeded in installing the USB 2.0 Ethernet Adapter.
3
„ Un-installation
If you want to remove the USB 2.0 Ethernet Adapter driver, please click “ Start “→
“ Control Panel “→ “ Add / Remove Programs “ , then follow the procedure:
Step1.
Select “ USB 2.0 to Ethernet
9.xx. xxxx.xxxx (driver version)
“ then click “Remove “ to continue.
Step 2.
Click “ OK “ to continue.
Step 3.
Select “ Yes, I want to restart my
computer now” and click “Finish”
to restart your computer and
complete removing the USB 2.0
Ethernet Adapter driver.
4
Installation of USB 2.0 Ethernet Adapter under Windows
Vista / 7
„ Software Installation
Step 1.
Insert the Driver/Manual CD to start the installation (or double click the
“setup.exe”).
Step 2.
Click “ Next “ to continue.
Step 3.
Select “Yes, I want to restart my
computer now” and Click “ Finish
“ to complete setup.
After reboot you can connect the USB2.0 Ethernet Adapter with your
computer.
5
„ INSTALLATION CONFIRMATION
●
To make sure you have installed the USB 2.0 Ethernet Adapter successfully,
please move the cursor to “ Start ” Æ “ Control Panel home ” Æ “ Hardware
and Sound “Æ “ Device Manager ”.
● Double click “ Network Adapters ” and it will show the “LAN9500 USB 2.0 to
Ethernet 10/100 Adapter (SAL10)”.
Congratulations!! You succeeded in installing the USB 2.0 Ethernet Adapter.
6
„ Un-installation
If you want to remove the USB 2.0 Ethernet Adapter driver, please click “ Start “→
“Control Panel “→ “Programs“ → “Programs and Features “ , then follow the
procedure:
Step 1.
Select “ USB 2.0 to Ethernet
9.xx.xxxx.xxxx (driver
version)“ then click “ Uninstall
“ to continue.
Step 2.
Click “ OK “ to continue
Step 3.
Select “Yes, I want to restart
my computer now” and click
“Finish” to restart your
computer and complete
removing the USB 2.0
Ethernet .
7