Data Sheet FUJITSU PRIMECENTER M2 19-inch Racks
Data Sheet
FUJITSU PRIMECENTER M2 19-inch Racks
19-inch Industry Standard Rack Systems
mm wide and 1200 mm deep design for even
more capacity and a smaller 24 U version at 600
mm width and 1100 mm depth for better space
allocation in office environments are obtainable.
High level safety and security is ensured by
comprehensive test scenarios in grounding (DIN
EN60950) and IP20 (DIN 40 050 and IEC 529),
protection against hazardous parts, compliance
with EIA310-D, DIN41494, IEC 297 and a
mechanical door lock with up to 200 combinations
on request.
A wide range of accessories is directly
available and can be configured via FUJITSU
SystemArchitect® or can be retrofitted on demand.
An additional security environment for the new
M2 Rack is the Managed Rack Solution (MRS)
which is based on Fujitsu PalmSecure ID Match, a
MLR1000 electronic door lock and different rack
shock and door sensors. This biometric solution is
characterized through its more reliable hand vein
scan technology in contrast to fingerprint or iris
scanner solutions. Another optional but helpful
add-on is the tilting protection which prevents
the rack from tipping over while heavy servers are
pulled out during maintenance.
PRIMECENTER M2 19-inch Racks
The Fujitsu PRIMECENTER M2 family meets 19inch rack standards, while offering a suitable
platform for rack configurations. Accurate
fitting is ensured via the various rails for Fujitsu
servers, storage systems and server products
from other manufacturers. An elaborated inner
zone management generates maximum space
utilization and flexibility for all kinds of rack
components, for example the operating controls,
uninterruptible power supplies (UPS) and power
distribution units (PDUs). With the announcement
of M2 racks, Fujitsu has released new innovative
PDUs with a basic, metered and managed feature
set - from easy cabling to the notification of
current measurements and full management of
each electrical socket.


The trend to consolidation as a result of
virtualization and optimization require
environments that are more flexible and reliable.
Decades of data center expirience at Fujitsu result
in the latest 19-inch Rack Family.
The new Fujitsu PRIMECENTER racks are
the foundation for meeting IT data center
requirements. The PRIMECENTER Racks are
the basis for building perfect data center
infrastructures. The PRIMECENTER 19-inch
Racks can be used to install Fujitsu solutions
as well as third-party products. They meet all
requirements for flexibility thanks to the multiple
configuration options, cooling and maintenance
features. In addition a broad portfolio of optional
rack accessories complete the efficient rack
infrastructure solutions.
Approximately 83% perforation ensures an
optimized air flow for cooling and high heat
dissipation. This - combined with a tool-free design
for easy service and simple maintenance plus high
scalability serves – is an ideal solution for all types
of infrastructures.
The PRIMECENTER M2 Racks are available in
four different symmetric structures with up to 6
vertical 19-inch slots on the front left and right
with enough space for cabling options and switch
installations. This includes two 42 U units with
1200 mm depth in 600 mm width for perfect
use of space in datacenters and a 800 mm width
version for more cable space and vertical slot
options. Moreover a 47 U rack version with 800
Page 1 / 5
www.fujitsu.com/global/products/computing/servers/primergy/racks/
Data Sheet FUJITSU PRIMECENTER M2 19-inch Racks
Features & Benefits
Main Features
Benefits
„„ 19-inch standard rack technology
„„ Compatible with Fujitsu Technology Solutions rack servers,
storage products and components as well as products from most
manufacturers.
„„ Different rack frames for efficient server, switch, power and cable
installation with best possible airflow.
„„ Lightweight aluminum frame for low stress on DC raised floors.
„„ Symmetric rack structures: 600 mm with 24 and 42 height units or
800 mm width with 42 and 47 height units.
„„ 24, 42 and 47 U, up to 6 vertical slots for switches or cable routing.
„„ One wing front door and two wing rear door, tool less removable.
„„ Retractable anti-tilt protection.
„„ Low heavy duty castors for safe movement of the rack.
„„ Optional rack monitoring system (RMS) available.
„„ Optional factory installation with cabling and final verification.
„„ Front-, rear doors and side panels are easy to dismount and
lockable.
„„ Ideally integrated into the rack with maximum safety against tilt
over.
„„ Maximum utilization of rack space and convenient maintainability.
„„ Optimized rack structures
„„ Design
„„ Capacity
„„ Ease of service
„„ Quick releaseable parts including lock-features (optional electronic
locking mechanism)
„„ Optional Anti Tilt Protection


„„ Various PDU-Brackets and easy tool-less accessories
Page 2 / 5
www.fujitsu.com/global/products/computing/servers/primergy/racks/
Data Sheet FUJITSU PRIMECENTER M2 19-inch Racks
Technical details
Base unit
Order code Dimensions (W x D x H) Vertical
Slots
Transport Dimensions
(W x D x H)
Max. pay load / dynamic Net weight
load
PCR M2 24U 600
S26361600mm x 1100mm x
K828-V624 1200mm
0
700mm x 1400mm x
1610mm (approx.)
480 kg / 570 kg
82 kg
PCR M2 42U 600
S26361600mm x 1200mm x
K828-V642 2000mm
0
700mm x 1400mm x
2150mm (approx.)
840 kg / 1000 kg
120 kg
PCR M2 42U 800
S26361800mm x 1200mm x
K828-V842 2000mm
2x3
900mm x 1400mm x
2150mm (approx.)
840 kg / 1000 kg
143 kg
PCR M2 42U 800 LC
S26361800mm x 1200mm x
K828-V942 2000mm
2x3
900mm x 1700mm x
2375mm (approx.)
900 kg / 1130 kg
233 kg
PCR M2 47U 800
S26361800mm x 1200mm x
K828-V847 2200mm
2x3
900mm x 1400mm x
2360mm (approx.)
840 kg / 1000 kg
170 kg
Rack Infrastructure
Variants
Symmetrical design 800 x 1200 mm, 47 U
Symmetrical design 800 x 1200 mm, 42 U
Symmetrical design 600 x 1200 mm, 42 U
Symmetrical design 600 x 1100 mm, 24 U
Capacity
24 height units with
up to 20 kg load per
horizontal height unit
and maximum weight
up to 570 kg.
Doors
One wing front door and twin rear door with high percentage of holes (approx. 83%) for improved server cooling.
Ergonomic door handles
Front door
One wing front door with right or left hand mounting possible.
Rear door
Internal depth
Twin doors to optimize needed service space
19-inch clearance
450.5 mm
Front/rear 19-inch level
740 mm, both levels steplessly movable
Space for cabling
Up to 80 mm on front side (42/47 U)
Up to 380 mm on rear side (42/47 U)
42 height units plus 6
vertical height units.
Up to 20 kg load per
horizontal, 3.5 kg per
vertical height unit
and maximum weight
up to 1000 kg.
42 height units plus 6
vertical height units.
Up to 20 kg load per
horizontal, 3.5 kg per
vertical height unit
and maximum weight
up to 1130 kg.
47 height units plus 6
vertical height units.
Up to 20 kg load per
horizontal, 3.5 kg per
vertical height unit
and maximum weight
up to 1000 kg.


42 height units with
up to 20 kg load
per horizontal and
maximum weight up
to 1000 kg.
Cable management and service
Maximum load
Up to 11300 N stationary on leveling feets, 200 N per U
11300 N dynamic load (movable on castors)
Permitted total weight
Shipment
Optionally ex works, fully mounted and tested including cabling. Shipment including 4 heavy-duty castors and 4
adjusting feet on a shock-absorbing pallet.
Top cover
Security
Two break out entries for external cabling
Protection class
DIN (EN60529) IP20
Security functions
Mechanical lockable front and rear door (optional electrical) with standard identically locks or possible different lock
combinations.
Optional antitilt protection.
Rack accessories
Optional available: rack mounting kits; cable management solutions; networking components, I/O switches,
mounting kits, accessory kits, shelves, electrical connections, monitoring (rack console, rack monitoring system, KVM
switches), uninterruptible power supply (UPS), power distribution units (PDU)
Environment
Environmental compliance
Page 3 / 5
Operation:
Transport:
Class 3K3*, 3M2, 3S2
Class 2K2, 2M2. 2M1
www.fujitsu.com/global/products/computing/servers/primergy/racks/
Data Sheet FUJITSU PRIMECENTER M2 19-inch Racks
Environment
Environmental compliance note
*Possibly restricted by rack components
Operating relative humidity
15 - 98 %
Operating environment
FTS 04230 – Guideline for Data Center (installation specification)
Operating environment link
http://docs.ts.fujitsu.com/dl.aspx?id=e4813edf-4a27-461a-8184-983092c12dbe
Compliance
GS
Europe
CE
EN
USA/Canada
FCC Class A
UL/CSA
Global
CB
RoHS (Substance limitations in accordance with global RoHS regulations)
WEEE (Waste electrical and electronical equipment)
Compliance notes
There is general compliance with the safety requirements of all European countries and North America. National
approvals required in order to satisfy statutory regulations or for other reasons can be applied for on request.
Compliance link
https://sp.ts.fujitsu.com/sites/certificates


Germany
Page 4 / 5
www.fujitsu.com/global/products/computing/servers/primergy/racks/
Data Sheet FUJITSU PRIMECENTER M2 19-inch Racks
More information
Fujitsu OPTIMIZATION Services
More information
Copyrights
In addition to Fujitsu PRIMECENTER M2 19-inch
Racks, Fujitsu provides a range of platform
solutions. They combine reliable Fujitsu
products with the best in services, know-how
and worldwide partnerships.
Learn more about Fujitsu PRIMECENTER M2
19-inch Racks, please contact your Fujitsu
sales representative or Fujitsu Business
partner, or visit our website.
http://www.fujitsu.com/primergy
All rights reserved, including intellectual
property rights. Changes to technical data
reserved. Delivery subject to availability. Any
liability that the data and illustrations are
complete, actual or correct is excluded.
Designations may be trademarks and/or
copyrights of the respective manufacturer,
the use of which by third parties for their
own purposes may infringe the rights of such
owner.
For further information see http://www.fujitsu.
com/fts/resources/navigation/terms-of-use.
html
Copyright 2017 FUJITSU LIMITED
Computing Products
www.fujitsu.com/global/products/computing/
Software
www.fujitsu.com/software/
Contact
FUJITSU LIMITED
Website: www.fujitsu.com
2017-07-06 INT-EN
Page 5 / 5
Fujitsu green policy innovation
Fujitsu Green Policy Innovation is our
worldwide project for reducing burdens on the
environment.
Using our global know-how, we aim to
contribute to the creation of a sustainable
environment for future generations through IT.
Please find further information at http://www.
fujitsu.com/global/about/environment


Fujitsu Portfolio
Built on industry standards, Fujitsu offers a full
portfolio of IT hardware and software products,
services, solutions and cloud offering, ranging
from clients to datacenter solutions and
includes the broad stack of Business Solutions,
as well as the full stack of Cloud offerings. This
allows customers to select from alternative
sourcing and delivery models to increase
their business agility and to improve their IT
operation’s reliability.
Disclaimer
Technical data is subject to modification and
delivery subject to availability. Any liability
that the data and illustrations are complete,
actual or correct is excluded. Designations
may be trademarks and/or copyrights of the
respective manufacturer, the use of which
by third parties for their own purposes may
infringe the rights of such owner.
All rights reserved, including intellectual property rights. Changes to technical data reserved. Delivery subject to availability.
Any liability that the data and illustrations are complete, actual or correct is excluded.
Designations may be trademarks and/or copyrights of the respective manufacturer, the use of which by third parties for their
own purposes may infringe the rights of such owner.
For further information see http://www.fujitsu.com/fts/resources/navigation/terms-of-use.html
Copyright 2017 FUJITSU LIMITED
www.fujitsu.com/global/products/computing/servers/primergy/racks/
Download PDF
Similar pages
Omslag, baksida
Fujitsu Enterprise MAV2073RC Hard Drive - 73.5GB
PGA-135C-C02
PGA-107C-A02
PGA-441C-A06
Cables Direct 2m USB2.0 A - Mini B m/m
PGA-211C-A01
PGA-135C-A06
DIP-8P-M01