KE69 Dual Rack Mount Kit - 2X-021G This dual rack mounting kit installs two KE6900 units side by side in 1U of server rack space. User Instructions Package Contents: 1 x Link Bracket 1 x Right Mounting Bracket 1 x Left Mounting Bracket 4 x Phillips Head Hex Screws 4 x Flat Screws Installation: 1. Remove four screws from the KE6900 units and then use the same screws to secure the units together with the link bracket. Link Bracket 2. Remove the bottom and side screw from each KE6900 unit. Remove Screws Remove Screws KE69 Dual Rack Mount Kit - 2X-021G User Instructions 3. Use the screws from step 2 to install the left and right mounting brackets. Phillips Head Hex Screw Left Mounting Bracket Right Mounting Bracket Phillips Head Hex Screw 4. Screw the mounting brackets to the rack.