User`s Guide App Based Pan-Tilt iSecurity WiFi

User’s Guide
App Based Pan-Tilt iSecurity WiFi Camera
For Smartphone and Tablet
(Standalone or IWACHALARM Add-On)
Model: SM-821DTH
© Copyright 2016
This manual is furnished under license and may be used or copied only in accordance with the terms
of such license. Except as permitted by such license, no part of this publication may be reproduced,
stored in a retrieval system, or transmitted, in any form or any means, electronic, mechanical, recording, or otherwise, including translation to another language or format, without the prior written permission of SecurityMan. The content of this manual is furnished for informational use only, is subject to
change without notice, and should not be construed as a commitment by SecurityMan. SecurityMan
Inc assumes no responsibility or liability for any errors or inaccuracies that may appear in this book.
FCC Information
Notes on FCC’s “Consistent Statement of Information” This product meet the requirements specified in
Part 15 of FCC Regulation. Operation rests with the following two conditions:
(1) The equipment should not cause any harmful interference.
(2) The equipment must receive and process any interference, including any possible interference
caused by operation mistakes.
After testing the product, we confirm that the camera complies with the provision for class C digital
equipment in the 15th part in FCC regulations; and the receiver complies with the limitations for class
B digital equipment in Part 15 of FCC regulation. The product generates, applies and emits radio
waves. It might cause harmful interferences to wireless communication if not be installed and used
following the description of the manual.
The product may cause interference in residential area, and the customer should take remedies to
eliminate the interference on their own costs.
If the product causes any harmful interference to wireless equipment or disturbs the receiving of TV
signals (it can be identified by turning on and off the product), you can solve the trouble by following
methods:
• Readjust the product or put it in another place.
• Extend the distance between the equipment interfered and the product.
• Refer to dealers or experienced radio electrician for help.
Warranty
SecurityMan Inc warrants that this product will be free from defects in title, materials and manufacturing workmanship for one year or otherwise specified on the product packaging. This limited warranty
shall commence from the date of purchase. SecurityMan products warranty is not transferable and is
limited to the original purchaser. If the product is found to be defective then, as your sole remedy and
as the manufacturer’s only obligation, SecurityMan will repair or replace the product. This warranty
shall not apply to products that have been subjected to abuse, misuse, abnormal electrical or environmental conditions, normal wear and tear, or any condition other than what can be considered normal
use.
Warranty Disclaimer
SecurityMan Inc, makes no other warranties, express, implied or otherwise, regarding this product,
and specifically disclaims any warranty for merchantability or fitness for a particular purpose. The
exclusion of implied warranties is not permitted in some states and the exclusions specified herein may
not apply to you. This warranty provides you with specific legal rights. There may be other rights that
you have which vary from state to state.
Limitation of Liability
The liability of SecurityMan Inc, arising from this warranty and sale shall be limited to a refund of the
purchase price. In no event shall SecurityMan be liable for costs of procurement of substitute products
or services, or for any lost profits, or for any consequential, incidental, direct or indirect damages,
however caused and on any theory of liability, arising from this warranty and sale. These limitations
shall apply not withstanding any failure of essential purpose of any limited remedy.
For Customer Service: 888-977-3777
SecurityMan
4601 E. Airport Drive, Ontario, CA 91761, USA
Tel: 888-977-3777 Tel: 909-230-6668 Fax: 909-230-6889
Email: info@securitymaninc.com
Website: http://www.securitymaninc.com
Copyright 2016 by SecurityMan v2.2
Table of Contents
Introduction
Features
Contents
Product Basics
Hardware setup
Mobile device setup (Smartphone / tablet)
Adding the camera to the app (Smart Config Method)
APP (camera live) live view and settings
Live View Icons
Back
Live View
Snapshot
Refresh
Talk
Stream Quality
Settings
Settings menu and options
Camera Name
DID
Firmware Version
Library Version
Check upgrade
Change
Change admin password
Motion detection
Event list (list Video Playback)
Overwrite
Storage management
Video rotation
Set Date & Time
WIFI
Personal cloud storage
Apply
Adding a camera to app (Alternative Methods)
Search in LAN
Smart Config
Broadcast in LAN
AP Mode
QR Scan
Manual Input
Specifications
1
1
1
4
4
4
5
8
8
9
9
9
9
9
9
9
10
11
11
11
11
11
11
11
11
12
13
13
14
14
15
15
17
17
18
19
19
20
22
23
25
Introduction
The SecurityMan SM-821DTH combines a high-quality color video camera with the flexibility
of remote pan/tilt operations using Smartphone and tablet. It is equipped with 3.6mm lens and
720P video resolution allows user to view close or distant objects with exceptional quality. In
addition, due to the small file sizes produced by the H. 264 video compression it has the ability
to record for a long period of time before beginning to overwrite older events. Above all, this
camera can be integrated with the IWATCHALARM home automation series to remote access
anywhere, anytime.
Features
• Quick & easy QR code setup (no port forwarding required)
• Works as a standalone App based Pan-Tilt camera or integratable with the SecurityMan
IWATCHALARM system
• Remote monitoring over Smartphone and tablet
• Motion detection video recording to local private micro SD card
• App accessible alarm log to see when an event occured
• Free apps on Google Play and App Store
• H.264 advanced video compression for faster video streaming
• Built-in microphone and speaker for two-way audio
• Night vision up to 33ft
Contents
• WiFi Pan-Tilt IP Camera with Mounting Bracket & Antenna
• AC Adapter with 10ft white cable (5VDC 1.0A)
• Mounting accessories
• Antenna
• Users manual
*Micro SD card not included
1
When using this product, the safety precautions below must be taken to avoid possible legal liabilities and damages. Retain and follow all product safety and operating instructions. Observe
all warnings in the product operating instructions. To reduce the risk of bodily injury, electric
shock, fire and damage to the equipment, observe the following precautions.
PLEASE NOTE that under certain circumstances, audio/video recording may be PROHIBITED by
law. This device should be used only in compliance with all applicable federal, state and local
statutes.
• DO NOT place this product too close to medical equipment.
1. Radio waves may potentially cause breakdown of medical electrical equipment and thus
cause incidents.
2. Place this product at least 22cm from the heart pacemaker. Radio wave potentially influences
heart pacemaker and thus leads to respiratory disturbance.
• DO NOT uses this product to monitor equipment or activities that are relevant to one’s
privacy.
Monitoring one’s private activities without consent is illegal and this product is not designed or
manufactured for these purposes.
• DO NOT use this product to carry out any illegal activities such as sneak preview, and etc.
SecurityMan shall not be responsible for any consequences of illegal conducts made by users.
• DO NOT put the plastic package bags in reach of children or babies. Young children can
choke on these items if they put them into their mouths.
• DO NOT plug the AC adapter into the outlet in improper situations.
• Plugging in an AC adapter with wet hands might cause electric shock.
• Plugging in the AC adapter unsteadily might cause fire or electric shock.
• DO NOT cover the AC adapter when it is connected to an outlet, place the adapter near
heaters, or put it on the floor which is equipped with a heater. The above mentioned operation
might cause fire or incidents.
• DO NOT use it aboard; please abide by the airway’s provision. It might influence communication aboard and the flying apparatus if departing from the airway’s regulation. This will result
in accident, possible death and severe physical hurt.
• DO NOT disassemble or repair the camera, receiver or other relevant peripheral equipment
s by yourself. Improper disassembly might cause damages to the product or the peripheral
equipment.
• DO NOT put the camera in quaky paces. The camera may be unstable or out of operation
if installed improperly. Such installation may also cause breakdown.
2
• DO NOT touch, shake or hold the antenna. Touching, shaking or holing the antenna might
influence the receiving of electromagnetic wave, and thereby influence the receiving effect.
• DO NOT use the camera in complex environment, the obstruction of stumbling block will
affect the electromagnetic wave and influence the receiving range. Wall, tree and other stumbling block might absorb, reflect the electromagnetic wave, and influence the receiving range.
• DO NOT use the camera in the places which are covered with metal. The around metal,
such as elevator and cabin, might shield the electromagnetic wave, and result in inability to
receive signals.
3
Product Basics
Light Sensor
Night Vision LED’s
Speaker
Antenna
Power LED
Microphone
Ethernet Port
Reset Button
DC In
Pair Button
Mounting Socket
Micro SD Slot
HARDWARE SETUP
Screw in the cameras antenna and insert your Micro SD memory card (not included) into the tf
slot. Then insert the female end of the cameras AC adapter into the DC in port located behind
the camera and the other end into a wall outlet closest to you. You can re-position the camera to
a different location once it has been successfully added to the app.
NOTE: The camera will perform a gear calibration self test every time it is powered on. This
test consists of several up, down, left and right rotations. DO NOT pan or tilt the camera with
your hands.
4
MOBILE DEVICE SETUP (Smartphone/Tablet)
Open the App Store (iOS) or Google Play (Android) on your mobile device. Then search for
and install the “CAMERALIVE” application.
ADDING THE CAMERA TO THE THE APP (Smart Config Method)
The CAMERALIVE app has a built in “user friendly” step-by-step interactive guide that you can
follow when adding the camera.
IMPORTANT:
• Make sure your Smartphone or tablet is connected to “the same Wi-Fi network as the
one you want to put the new camera on”.
• Make sure you have the app installed on your Smartphone or tablet.
• Make sure the camera(s) being added is no more than 2 feet from you during the pairing
process. You can place the camera in the desired location when completed.
When you are ready, launch the app and tap on the + (add) symbol located to the bottom left
corner of the screen to begin adding the new camera.
5
Tap on the SEARCH IN LAN option, and then select SMART CONFIG.
NOTE: The included Ethernet cable is NOT required when adding the camera using our recommended SMART CONFIG method.
“Press and Release” the pair button on the back of the camera. At this point the green
power LED located on the front of the camera will start to flash rapidly indicating that it is in
pair mode. Once the LED starts to flash rapidly, press next on the Smartphone prompt.
When prompted, input the Wi-Fi password of the network that you are currently connected too and press next. This will allow the app to smart configure the camera using your
current wireless network.
NOTE: This part of the setup process may take up to a minute to complete. Please be patient
and wait for the device password screen to pop up.
6
Once your camera has been detected by the app the green power LED on the camera
should start to flash steady. When prompted, give your camera a name (front door, living room,
etc) input the default camera password 123456 and tap save. Once completed, your camera will be added to the device list area.
7
APP (CAMERA LIVE) LIVE VIEW AND SETTINGS
To access your camera, simply launch the CAMERA LIVE app on our mobile device then tap
on the camera you want to view to bring up the live view. When you have a live view of the
camera image, you can then swipe up, down, left & right to move the camera in the corresponding direction (SM-821DTH only).
LIVE VIEW ICONS
1.
2.
3.
4.
5.
6.
7.
8
Back
Live View
Snapshot
Refresh
Talk
Steam Quality
Settings
BACK
Tapping on the Back option will return you to the previous screen.
LIVE VIEW
Cameras live feed.
SNAPSHOT
Takes a snapshot of the current live view and saves it to your phones photo album.
REFRESH
Refreshes the connection between the phone and the camera, and should only be used when
the live view becomes frozen, disconnected or unstable.
TALK
Pressing and holding the microphone icon allows you to speak to the person on the other end
of the camera being viewed. This feature only works when the microphone icon is pressed and
held and is identifiable when the microphone icon is displayed on the live view screen (shown
below) and is deactivated as soon as the icon is released.
STREAM QUALITY
Lets you select the quality of the video stream being displayed on your mobile device. Options
include 1280x720 and 640x480..
SETTINGS
Tapping on the settings icon will allow you to change the camera time, date, passwords, and
much more. To configure these settings, tap on the settings icon located at the upper right
corner, enter the default admin password 123456 and tap ok to proceed.
9
SETTINGS MENU AND OPTIONS
The camera settings and configuration menu options allow you to change device and admin
password, enable/disable motion detection recording, playback events and much more. Here
is a list of options available.
Camera Name
DID
Firmware Version
Library Version
Check Upgrade
Change Camera Password
Change Admin Password
Motion Detection
Push Notification (Not Applicable)
Event List (Video Playback)
Overwrite
Storage Management
10
Video Rotation
Set Date & Time
Wi-Fi
Personal Cloud Storage
Apply
CAMERA NAME
Displays the camera’s name
DID
The Device ID (DID) section provides you with the cameras ID which is used to add the camera
to the app, unique to each device and is not configurable.
FIRMWARE VERSION
The Firmware Version section displays the cameras current firmware version and is not configurable.
LIBRARY VERSION
The Library Version section displays the cameras current library version and is not configurable.
CHECK UPGRADE
The Check Upgrade performs a firmware check over the internet and installs it if and when one
is available.
CHANGE PASSWORD
The Change Camera Password option allows you to change the cameras default password
(Camera password: 123456) which is used to login and view the camera remotely. This is the
same password used when first adding the camera to the app.
CHANGE ADMIN PASSWORD
The Change Admin Password option allows you to change the cameras default admin password (Admin password: 123456) which is used to access the camera settings and configuration page.
MOTION DETECTION
The Motion Detection option is used to enable or disable motion detection recording. To enable
or disable this feature, simply tap on the option label and select the desired option from the list
provided. Options include off, low, medium and high.
11
EVENT LIST (VIDEO PLAYBACK)
NOTE: For best results, we recommend using a Micro SD card class 6 or higher (Support up to
32GB).
The Event List option is to view and playback recorded events that are stored on the Micro SD
card inserted into the back of the camera.
To playback video events simply tap on the event list option and then set the period (day, week,
month) and a date range. When set, tap on load.
The load option will bring up all the events stored for the set search criteria. Locate the event
you want to playback and tap on it to play it.
12
OVERWRITE
The overwrite option enables and disables the out overwrite feature. Enabling the loop record
feature allows the camera to loop back to begin deleting old files stored on your memeory card
to make room for new files.
STORAGE MANAGEMENT
The Storage Management option allows you to view the total/free space available, format
(erase) and safely eject the memory by using the un-mount option.
NOTE: Formatting the memory card will erase all of its contents.
13
VIDEO ROTATION
Video Rotation allows you to change the cameras flip the live view so that you can mount the
camera upside down. Options include normal, horizontal, vertical and 180 degrees. To
change the image orientation, simply tap on the video rotation option and select from the
options provided.
SET DATE & TIME
The set date & time option allows you to set the cameras time zone and enable/disable daylight savings.
14
WIFI
Used to change or connect the camera to your Wi-Fi network. To connect or change the network, simply tap on the WIFI option, select the WIFI network you want to connect too.
Then enter the password associated to the selected network and tap join to connect to the
network.
PERSONAL CLOUD STORAGE
The personal cloud storage option allows you to configure the camera too store all motion
detection snapshot pictures to your personal Dropbox (recommended) or Baidu (commonly used
overseas countries) account. To enable and configure this feature, simply tap on the personal
cloud storage option and enable the Upload on/off option.
NOTE: Each motion detection will captured 5 JPG snapshot images to your personal cloud
storage. Personal cloud storage do not support video footage.
15
Create a directory (Camera, Security, etc) name for the recordings to be stored in and select the
account type (Dropbox or Baidu).
Now tap on account settings to login to the storage type account.
Enter the storage credentials, click on the sign in option when done and then tap on the apply
option to apply the settings.
NOTE: please check your Dropbox periodically to make sure the communication between the
camera and the Dropbox account is still linked.
16
APPLY
Applies all the changes made to the camera
ADDING A CAMERA TO APP (Alternative Methods)
The CAMERALIVE app has multiple “user friendly” step-by-step interactive guides that you can
follow when adding a new camera to the app. Below are all methods that can be used with
step by step instructions on how to use them.
IMPORTANT: Before you attempt any of the methods below please do the following:
• Make sure your Smartphone or tablet is connected to “the same Wi-Fi network as the
one you want to put the new camera on”.
• Make sure you have the app installed on your Smartphone or tablet.
• Make sure the camera(s) being added is no more than 2 feet from you during the pairing
process. You can place the camera in the desired location when completed.
When you are ready, launch the app and tap on the + (add) symbol located to the bottom left
corner of the screen to begin adding the new camera.
17
Search In LAN
QR Scan
Manual Input
SEARCH IN LAN
The Search In LAN option consist of 3 methods that add your new camera to your wireless
network and Smartphone all in one shot.
Smart Config
Broadcast in LAN
AP Mode
18
SMART CONFIG
Please refer to the “adding the camera to the app (SMART CONFIG Method)” section at the
start of this user’s manual. Adding camera using SMART CONFIG method do not required
Ethernet connection.
BROADCAST IN LAN
The Broadcast in LAN option performs a search for cameras currently connected to your
network.
NOTE: If SMART CONFIG method is already setup, BROADCAST IN LAN may be used as an
alternative setup for secondary Smartphone device and so on.
To add a camera to the app using the Broadest in LAN option, make sure the camera is
powered on and the included Ethernet cable is connected to your router. When you are ready,
launch the app and tap on the + (add) symbol located to the bottom left corner of the screen to
begin adding the new camera.
Tap on the Search in LAN option, and select the Broadcast in LAN option. When selected,
wait for the app to populate a list of Device ID’s (DID) that it found on your network.
19
Identify the DID (device ID) that corresponds to the Serial ID printed on your cameras QR code
and select it. Once selected, you will be prompted to give your camera a name (front door,
living room, etc). After naming your camera, input the default camera password 123456 and
tap save. Once completed, your camera will be added to the device list area.
AP MODE
The AP Mode option requires you to connect to the camera directly so that you can manually
configure its settings. To add a camera to the app using the AP mode method, make sure the
camera is powered on.
When you are ready, launch the app and tap on the + (add) symbol located to the bottom left
corner of the screen to begin adding the new camera. Then tap on the Search in LAN option,
and select AP Mode.
Now press and hold the Pair button on the back of the camera until the cameras pair LED
stays solid. When solid, go to your Smartphone’s Wi-Fi settings and connect to the cameras
broadcasting ID “CAMERA-LIVE”. Wait for your phone to connect then return to the Camera
Live app and press NEXT.
20
Select the Wi-Fi network you want to put the camera on, input the Wi-Fi password associated
with the selected network and press ok. Wait for your camera to reboot and press next.
Identify the DID (device ID) that corresponds to the Serial ID printed on your cameras QR code
and select it. Once selected, you will be prompted to give your camera a name (front door,
living room, etc). After naming your camera, input the default camera password 123456 and
tap save. Once completed, your camera will be added to the device list area.
21
QR SCAN
The QR Scan option does not require you to setup any network or WIFI information (for wifi
setup refer to SMART CONFIG or AP MODE or simply connect the included Ethernet cable to
your router) and is a quick and easy way to add a camera to a secondary device (wife,
kids, etc) once it the camera has already been added to a network.
When you are ready, launch the app and tap on the + (add) symbol located to the bottom left
corner of the screen to begin adding the new camera.
Tap on the QR Scan option, and then point your Smartphone’s camera to the QR code located
at the bottom of the camera.
22
Once your QR code has been scanned, you will be prompted to give your camera a name
(front door, living room, etc). After naming your camera, input the default camera password
123456 and tap save. Once completed, your camera will be added to the device list area.
MANUAL INPUT
The Manual Input option does not require you to setup any network or WIFI information (for wifi
setup refer to SMART CONFIG or AP MODE or simply connect the included Ethernet cable to
your router) and is a quick and easy way to add a camera to a secondary device (wife,
kids, etc) once the camera has already been added to a network.
When you are ready, launch the app and tap on the + (add) symbol located to the bottom left
corner of the screen to begin adding the new camera.
23
Tap on the Manual Input option, and then manually input the serial id number (alpha numeric)
located underneath the camera into the DID field.
Once you are done inputting the serial ID, give your camera a name (front door, living room,
etc). After naming your camera, input the default camera password 123456 and tap save.
Once completed, your camera will be added to the device list area.
24
Specifications
SM-821DTH
Lens
1/4 “ CMOS color
Pan-Tilt WiFi/
Sensor
OV9712
Eth IP Camera
Focal Length
3.6mm
Pan-Tilt Control
260:Horizontal 120:Vertical (no zoom)
Viewing Angle
50 degree
System
P2P (Cloud Technology)
Video Compression
H.264
Resolution
720P HD (1280x720), VGA (640x480), QVGA (320x240)
Video Rate
30fps
Motion Detection
Yes
Transmission
Wired Ethernet or Wi-Fi
NIC Interface
10/100Mbps (IEEE802.3, RJ45)
Protocols
TCP/IP, DHCP, SMTP,HTTP, UPNP
WiFi Interface
802.11b/g/n
WiFi Frequency
2400~2483.5MHz
WiFi Channel
11
Speech Mode
12.2kbps (ARM), 8kbps (PCM)
Two-Way Audio
Yes (built-in Mic and speaker)
Micro SD Slot
Yes, (supports up to 32GB class 6 or higher/ MicroSD not included)
Application
iOS, Android
Playback
Yes
Users
7 users max
Security
2 password access control
Buttons
Pair, Reset
LED’s
Red
Night Vision
Up to 33ft (11pcs IR)
IR-Cut Filter
Yes
Light Sensor
Yes
Size (LxWxH)
4.5” x 4.0” x 5.5”
Power Consumption
Max 5W (IR On, WiFi enabled)
Power
DC 5V 1.2A
Weight gross/net
2.2lb/1.7lb
If you encounter any difficulty in the operation of this product after reading the manual, please feel free to contact
us. You can reach us by phone at 1-888-977-3777 from 8:30 AM to 5:30 PM Monday through Friday (Pacific
Standard Time) or by email techsupport@securitymaninc.com. We will be happy to answer your questions and
help you in any way we can.
25
www.securitymaninc.com