A3 manual D2452_Generic_RCA jack

Contents
Digital AV Sender with
Wideband IR Extender
1.Important Safety Information.......................................1
2.Package Content........................................................2
3.Panel Control And Function......................................... 3
4.Setup Guide...............................................................4
5.Troubleshooting......................................................... 5
1.Important Safety Information
To prevent fire or shock hazard, do not expose this product to rain and
moisture. For example: do not use near a bathtub, washbowl, kitchen
sink, or laundry tub, in a wet basement, or nearby a swimming pool. To
avoid electric shock, do not take apart this product, provided as an
accessory. This product should be operated only under power supply.
Do not overload wall outlets and extension outlets as this can result in
the risk of fire or electric shock.
1
2.Package Contents
2.Package
3.Panel
Control
Contents
and Function
Check to make sure that all units shown as below are enclosed.
If something missed, please contact your dealer.
1. 2.4GHz Transmitter x 1
Transmitter/Receiver
2. 2.4GHz Receiver x 1
3. IR Cable LED x 1
4. Power Adapters
(9V/500mA) x 2
5. Cables x 2
EUROPE Type
EUROPE Type(RCA to SCART)
USA Type
USA Type(RCA to RCA)
2
3
2.Package
4.Setup
Guide
Contents
5. Troubleshooting
To enjoy a life of wireless video and audio, just connect the
transmitter to whatever A/V source you like and connect the
receiver to a TV, monitor or speaker in another location.
2.Package
Not e: Mak e su reContents
the ON/ OFF swi tch is in the 「OFF 」pos ition bef or e co nne ct ion
Transmitter
1. Connect one end of the RCA cable (or scart cable) to the audio and video
jacks, and connect the other end to a source device as well.
2. Connect the DC plug of the adapter to the DC jack, and connect the power
supply to an outlet.
3. Fix IR mouse next to or in front of IR sensor of source device.
If there is no signal at all
Check cable connections from the transmitter to the source device, and
the receiver to the receiving device.
Make sure power of all devices are on.
Switch all power off and on again to ensure everything is functioning
well.
If the signal is poor, or there is an interference
Change transmitter's location.
Double check if there is a microwave oven in use, and if it is in the path
between transmitter and receiver. If yes, please either remove it or turn
it off.
Make sure the transmission is within its operating range (up to 200
meters with clear line of sight).
4. Turn on power of transmitter and your source device.
Care and Maintenance
Receiver
1. Connect one end of the RCA cable (or scart cable) to the audio and video
jacks, and connect the other end to a TV (or monitor, speakers) on which
you like to enjoy a program.
2. Connect the DC plug of the adapter to the DC jack, and connect the power
supply to an outlet.
3. Keep the front panel oriented toward your remote controller.
4. Turn on power of receiver and your receiving device.
5. Make sure ID code(see #4 on illustration) on both transmitter and receiver
are same.
4
Keep all parts and accessories out the reach of young children.
Do not attempt to open the case.
Keep dry. Precipitation, humidity, and liquids contain minerals that will corrode
electronic circuits.
Do not use or store the unit in dusty, dirty areas.
Do not store the unit in high temperature area. It can shorten the life of electronic
components, and warp or melt certain plastic parts.
Do not store the unit in cold temperature area. When the unit warms up (to its normal
temperature), moisture can form inside the case, which may cause damage to
electronic circuit boards.
Do not drop, knock, or shake the unit. Rough handling can break internal circuit
boards.
Do not use chemicals, cleaning solvents, or strong detergents when cleaning.
Only use the power adapter included in the package to operate the unit.
Try not overload electrical outlets or extension cords as this can result in fire or electric
shock.
5
WEEE Directive & Product Disposal
At the end of its serviceable life, this product should
not be treated as household or general waste. It should
be handed over to the applicable collection point for
the recycling of electrical and electronic equipment, or
returned to the supplier for disposal.
TTD-D2452T
TTD-D2452R
6
408-000691-00