4-Way HDMI Splitter
User’s Manual
HDM 4SP - 4-way HDMI splitter
• Splits input signal 4 ways without loss of strength or quality up to 30m.
• 4 x HDMI outputs.
• HDMI and DVI-D input.
• SPDIF and Optical Audio Input.
• Compliant to HDMI1.1 and HDCP 1.1.
• LED indicators on front panel.
• Supports high resolution input:
PC :VGA,SVGA, XGA, SXGA, and UXGA (1600×1200)
& HDTV : 480i, 576i, 480p, 576p, 720p, 1080i and 1080p
• Supports high resolution output:
Up to 1080i and 1080p depending on display
• Simple plug and play operation
Controls and Functions:
Front panel
Power indicator
When power is on LED will glow red 2Power On/Off button
Signal source selector
Press to switch between HDMI and DVI source signals.
HDMI output indicators 1-4
For normal connection LED will glow green
Controls and Functions:
Rear Panel
1. Power supply socket
Plug 12VDC power supply into the unit.
2-5HDMI outputs 1-4
Connect HDMI outputs to the HDMI inputs of your
TVs/LCDs/Plasmas/Monitors/Projectors using HDMI cables.
6. HDMI video and audio input
Connects to the HDMI output on your source equipment.
Connection and Installation:
Connect to DC power adaptor supplied, switch on power, the power indicator will
glow red and the other indicators will blink once.
Connect your HDMI source equipment to the HDMI input using a HDMI cable
Connect your display equipment (HDTVs/LCDs/Plasmas/Monitors/Projectors) using
HDMI cables. As each connection is made the corresponding output indicator LED
will glow green. Allow 5 to 30 seconds for each display to recieve picture and audio
Please note that although the splitter will support resolutions up to 1080i and
1080p, the final picture quality is dependant on the maximum resolution each
display is capable of showing.
Working temperature -10 - +50˚C
Working relative humidity 5 to 90%RH (no condensation)
Video expansion band 140MHz
Input video signal level 5Volts P-P
Video format - VGA
640 x 480, 800 x 600, 1024 x 768,1280 x 1024
Video format - HDTV
480i, 480p, 576i, 576p, 720p, 1080i, 1080p
Output video format HDMI+HDCP1.0/1.1
Max. input length
from source 30m
Max. transmission
length to display 30m
Power consumption 15Watts (max.)
Power 12VDC, 5Amp
W: 195mm x D: 137mm x H: 45mm
Weight 0.65Kg
◆ Contents
HDMI Splitter
1 pc
12VDC power adapter 1 pc
User’s manual
1 pc
! Caution
Do not unplug or jog the power socket, when the equipment is on. If your
HDMI Selector is not in frequent use please unplug to conserve energy.
Keep equipment away from liquids and damp atmospheric conditions to
prevent fires or electric shocks.
Keep away from heat and naked flames.
Do not open, no user serviceable parts inside.
Use only the adaptor supplied.
If you have any queries or require further
information, please contact
Customer Careline: 08457 573 479
(Local rate – UK only)
Technical Support: http://www.labgear.co.uk
Waste electrical products should not be
disposed if with household waste. Please
recycle where facilities exist. Check with
your Local Authority for recycling advice.