PICMG 1.0 Intel® Core™ 2 Quad/Duo LGA775 with
Intel G41/ICH7 2 x PCI Express Gigabit LAN/SATA/VGA/USB2.0
Main Features
ŒŒ Single Socket LGA775, Support Intel® 45nm/65nm Core™ 2 Duo/
Core™ 2 Quad with 800/1066/1333 MHz FSB
ŒŒ Intel® G41 and ICH7/ICH7R
ŒŒ 2 x DIMM, Support DDR3 Memory up to 4GB
ŒŒ 2 x Intel® 82574L PCI Express Gigabit Ethernet LANs
ŒŒ 4 x SATA, 8 x USB2.0, 2 x COM Ports
Product Overview
PEAK 777VL2 is the PICMG 1.0 full-size Single Board Computer (SBC), which support Intel® 45nm Core™ 2 Duo/Quad technology. Featuring Intel® G41
and ICH7 chipsets, the PEAK 777VL2 support socket LGA775 of Intel® Core™ 2 Quad/Core™ 2 Duo/Celeron® processor with 800/1066/1333MHz FSB.
The Intel® G41 supports dual channel non-ECC DDR3 memory up to 4GB maximum with two DIMM slots and an integrated graphics controller. The South
Bridge ICH7 manages SATA HDD ports, and parallel. Furthermore, it supports other versatile I/O ports such as two serial ports, six USB ports and two PCI
Express Gigabit LAN ports.
CPU Support
ŒŒ Supports Intel® LGA775 Core™ 2 Quad/Core™ 2 Duo/Celeron®
ŒŒ Intel® Embedded Processors List (Intel® Longevity CPU)
Intel® Core™ 2 Quad Processor Q9400
Intel® Core™ 2 Duo Processor E8400 & E7400 & E1500
Intel® Celeron® 440 Processor
ŒŒ 800/1066/1333 MHz System Bus
Main Memory
ŒŒ 2 x DIMM, support Dual channel SDRAM DDR3 memory up to 4GB,
FSB 1066/800MHz
* Note: Maximum 4GB. Actual memory size is dynamic based on the OS I/O resource
ŒŒ Intel® G41 Graphics Memory Controller Hub (GMCH)
ŒŒ Intel® ICH7/ICH7R I/O Controller Hub
ŒŒ Award System BIOS
ŒŒ Plug & Play support
ŒŒ 8M-bit flash ROM
On-board LAN
ŒŒ 2 x Intel® 82574L PCI Express Gigabit Ethernet LAN
ŒŒ 2 x RJ45 with LED
ŒŒ Supports Boot From LAN (PXE)
ŒŒ Supports Wake on LAN (When 5Vsb power available, LAN1 & LAN2)
ŒŒ Intel® G41 GMCH Integrated
ŒŒ CRT: 1 x DB15 VGA connector
I/O Interface
ŒŒ USB2.0: 6 ports, through 1 x 6 JST
ŒŒ Serial port: 2 ports, with 2 x 5 box header (2.0mm), supports RS232
ŒŒ Parallel port: 1 port, with 2 x 13 box-header (2.0mm)
ŒŒ PS2: 1 x 6-pin JST connector (2.0mm) for KB/Mouse
ŒŒ Fan: 4pin wafer for CPU; 3pin wafer for System; 3pin wafer for MCH
ŒŒ 2pin header for SMB; 2pin header for reset; 2pin header for
power on switch
ŒŒ 2pin header for power LED; 2pin header for HDD LED
ŒŒ I/O on bracket
1 x DB15 VGA connector
2 x RJ45 GbE port
1 x PS2
1 x IDE with 40-pin header
1 x Floppy with 34-pin header
ŒŒ SATA: 4 ports
Block Diagram
Intel® LGA775 Core™ 2 Quad/Core™ 2 Duo/
Celeron® Processors
800/1066/1333 MHz
Channel A
Intel® G41
DDR3 800/1066/1333
Channel B
4 x SATA
8 x USB2.0 (JST connector)
Parallel Port
PCI Golden Finger
Super I/O
KB/MS (box header)
2 x COM
ISA Golden Finger
LAN1 (82574L)
LAN2 (82574L)
Watchdog Timer
ŒŒ Watchdog timeout can be programmable by Software from 1 second
to 255 seconds
ŒŒ Tolerance 15% under room temperature 25°C
Non-operating 5% to 95%, non-condensing
ŒŒ CE approval
ŒŒ FCC Class A
On-board RTC
ŒŒ On-chip RTC with battery backup
ŒŒ 1 x External Li Battery
ŒŒ Torrance less than 2sec (24 hours) under 25°C
ISA Support
ŒŒ Through PCI to ISA Interface (ITE 8888)
ŒŒ No ISA Master Devices but ISA DMA Devices
ŒŒ Maximize ISA Slot support up to 3
System Monitor
Ordering Information
ŒŒ PEAK 777VL (P/N: 10P0777VL00X0)
PICMG 1.0 Full-Size SBC, Intel® G41 Chipset, Intel® LGA775 Core™ 2
Quad/Core™ 2 Duo/Celeron® processor with 800/1066/1333MHz,
Max. 4GB DDR3, DIMM, VGA integrated, 1 x GbE, 4 x SATA
ŒŒ PEAK 777VL2 (P/N: 10P0777VL01X0)
ŒŒ 5 voltage (For +1.1V, +1.5V, +3.3V, +5V, +12V, Vcore)
ŒŒ 3 Temperatures (CPU, two external Temperature Sensor)
ŒŒ 2 FANs speed ( For CPU and System)
PICMG 1.0 Full-Size SBC, Intel® G41 Chipset, Intel® LGA775 Core™ 2
Quad/Core™ 2 Duo/Celeron® processor with 800/1066/1333MHz,
Max. 4GB DDR3 DIMM, VGA integrated , 2 x GbE, 4 x SATA Ports
Power Input
ŒŒ Power source from backplane through PCI/ISA Golden Finger
ŒŒ Supports both AT or ATX Power Supplies
(Automatically, BIOS default: AT Mode)
ŒŒ When change to ATX, the BIOS default setting is as follow:
ŒŒ +3.3V is Converted from +5V and not directly from Backplane or
Power Supply
ŒŒ +5Vsb (Standby power) is connected from Backplane through 3pins
ŒŒ 4Pins +12V Power Input Connector
ŒŒ 338.58mm (L) x 122mm (W) (13.3" x 4.8")
ŒŒ Board level operating temperature: 0°C to 60°C
ŒŒ Storage temperature: -20°C to 85°C
ŒŒ Relative humidity: 10% to 90% (Non-condensing)
We reserve the right to change specifications and product descriptions at any time without prior notice.
Last update: 03/05/2014
Download PDF
Similar pages