SM 210 LSN RW Single Action Call Points

Fire Alarm Systems | SM 210 LSN RW Single Action Call Points
SM 210 LSN RW Single Action Call Points
▶ Alarm triggering by breaking of the glass pane
▶ Protection against injury with foil-labeled pane
▶ Indicator LED for triggered alarm or for inspection
evaluation
▶ Individual call point identification
▶ Call point query routines with evaluation and multiple
transmission.
The SM 210 LSN RW Single Action Call Point is used for
setting off an alarm by hand in the LSN.
System Overview
1
They are suitable for use throughout Europe (except
Germany).
j4
j4
B
A
j4
2
Pos.
Description
1
Call points for interior areas (IP 54)
2
Call points for exterior areas (IP 67) with sealed surface-mounted housing
A
For installation on a flush-mounted box, with cover frame
B
Surface-mounted housing
www.boschsecurity.com
2 | SM 210 LSN RW Single Action Call Points
•
Functions
An installation height of 1400 mm ±200 mm, measured
from the middle of the call point to the floor, must be
maintained.
Manual call points must be adequately illuminated by
sunlight or another light source (including emergency
lighting if present).
The maximum number of LSN elements that may be
connected depends on their current consumption from
the LSN data line. The limit values should be taken from
the product information supplied with the fire panel
used.
Standards, guidelines and planning recommendations
regarding the installation location etc. should also be
taken into consideration.
The regulations of the local fire services must be
observed.
•
•
2
1
•
•
5
Parts Included
3
Type of device
Qty.
Components
SM 210 LSN RW, 1
red, for surface
1
mounting in indoor 1
areas
Single Action Call Point, red housing
Surface-mounted housing, color red
Key
After the glass pane (1) is broken, the alarm is triggered by
the call point of the microswitch (2) jumping forward and
the indicator LED (3) blinks.
SM 210 LSN RW, 1
red, for surface
1
mounting in indoor 1
areas
Single Action Call Point, red housing
Cover frame, red
Key
To reset the microswitch (2), replace the glass plate (1).
The indicator LED (3) goes out.
SM 210 LSN RW, 1
blue, for surface
1
mounting in indoor 1
areas
Single Action Call Point, blue housing
Surface-mounted housing, color blue
Key
SM 210 LSN RW, 1
blue, for surface
1
mounting in indoor 1
areas
Single Action Call Point, blue housing
Cover frame, blue
Key
SM 210 LSN RW, 1
red, for surface
1
mounting in outdoor 1
areas
Single Action Call Point, red housing
Surface-mounted housing, IP 67, color red
Key
4
This does not reset the alarm on the fire panel.
Individual call point identification with display of the call
point address on the fire panel ensures the quick location
of the triggered call point.
Call point test (test alarm):
In an alarm test, the button key is pushed upwards into the
cut-out (4). This releases the catch (5) on the plate (1): the
plate shifts downwards and the microswitch is triggered
(2).
Variants
The designs of the Single Action Call Points for interior and
exterior areas are identical. Three installation variants are
available:
Technical Specifications
•
•
•
Operating voltage
10 V DC . . . 33 V DC
Current consumption
0.4 mA
SM 210 LSN RW, for indoor surface mounting
SM 210 LSN RW, for indoor flush mounting
SM 210 LSN RW, for outdoor surface mounting
The call points for interior areas are available in red and
blue; the call points for exterior areas are available in red.
Installation/Configuration Notes
•
Manual call points must be mounted visibly along
escape and rescue routes (e. g. exits, passageways,
stairwells) and be easily accessible.
Electrical
Mechanics
Dimensions (H x W x D)
•
•
•
Indoor area surface mounting 87 x 87 x 53 mm
Indoor area flush mounting
107 x 107 x 20 (36) mm
Outdoor area surface mounting
111 x 111 x 65 mm
Housing material
Plastic, ABS
SM 210 LSN RW Single Action Call Points | 3
•
•
Colors
Weight
Red, RAL 3001
Blue, RAL 5005
Approx. 400 g
Environmental Considerations
Protection class as per EN 60529
•
•
Detector for indoor areas
IP 54
Detector for outdoor areas
IP 67
Permissible operating temperature
-25 °C . . . +65 °C
Ordering Information
SM 210 LSN RW, Red, for Surface Mounting
in Indoor Areas
with surface-mounted housing
SM210-S-red
SM 210 LSN RW, Red, for Flush Mounting in
Indoor Areas
with masking frame for larger wall cuts
SM210-R-red
SM 210 LSN RW, Blue, for Surface Mounting
in Indoor Areas
with surface-mounted housing
SM210-S-blue
SM 210 LSN RW, Blue, for Flush Mounting
in Indoor Areas
with masking frame for larger wall cuts
SM210-R-blue
SM 210 LSN RW, Red, for Surface Mounting
in Outdoor Areas
with surface-mounted housing
SM210-S-red-outd
Accessories
Spare Glass Panes
for Single Action Call Points SM 210 LSN RW/
SM 120 RW, PU = 10 units
SM210-SPAREGLASS
www.boschsecurity.com
4 | SM 210 LSN RW Single Action Call Points
Americas:
Bosch Security Systems, Inc.
130 Perinton Parkway
Fairport, New York, 14450, USA
Phone: +1 800 289 0096
Fax: +1 585 223 9180
security.sales@us.bosch.com
www.boschsecurity.us
Europe, Middle East, Africa:
Bosch Security Systems B.V.
P.O. Box 80002
5600 JB Eindhoven, The Netherlands
Phone: + 31 40 2577 284
Fax: +31 40 2577 330
emea.securitysystems@bosch.com
www.boschsecurity.com
© Bosch Security Systems Inc. 2009 | Data subject to change without notice
T285376651 | Cur: en-US, V10, 12 Feb 2009
Asia-Pacific:
Represented by
Robert Bosch (SEA) Pte Ltd, Security Systems
38C Jalan Pemimpin
Singapore 577180
Phone: +65 6319 3453
Fax: +65 6319 3499
apr.securitysystems@bosch.com
www.boschsecurity.com