DATASHEET Push-Fit Connector

Push-Fit Connector
DATASHEET
No stripping! No soldering! Just cut and push-fit the connector. Organic
Lighting distinguishes itself by offering the most advanced and innovative
product range of energy efficient, plug & play professional LED lighting strip
products available.
Installer friendly, push on connectors with either 3’ or 16’ cords connect
power to liniLED without the need to strip the circuit board. Simply cut and
attach the connectors. Connectors lock onto the strip and require force to
remove. They are directional and arrows on the connector should be
matched with the arrows on liniLED.
Without protection connectors are IP40.
For IP68 specify Submersible Connector Covers.
Connector sets are supplied complete with an endcap, and acid free
silicone glue.
In addition we offer extension cords for directional changes, and in-line
connectors for splicing - in case of error, and to minimize waste during field
cutting and installation.
Push-Fit Connector Sets
Dimensions
L1.25”xW0.56”xH0.44” Top
L1.25”xW0.56”xH0.56” Side
Degree of protection (IP)
IP40, IP68 with Submersible Cover.
Material
Polycarbonate
Cord
White, PVC
Cord Length
3’3” and 16’3”
Weight
1.83oz 3’3”
7.76oz 16’3”
Packing
Per piece
Product code
011200
011201
011204
011205
Description
liniLED® Mono, power connector set, 3ft, ea
liniLED® Mono, power connector set, 16ft, ea
liniLED® RGB, power connector set, 3ft, ea
liniLED® RGB, power connector set, 16ft, ea
011202
011203
011206
011207
liniLED® Mono, Side power connector set, 3ft, ea
liniLED® Mono, Side power connector set, 16ft, ea
liniLED® RGB, Side power connector set, 3ft, ea
liniLED® RGB, Side power connector set, 16ft, ea
ORGANIC LIGHTING sysTems 511 N. Virginia Ave., Azusa, CA 91702 t 626-969-6140 f 626-609-4288 e sales@organiclighting.com
2015