bmxxbp0400h - Schneider Electric

BMXXBP0400H
Product data sheet
Characteristics
Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications
ruggedized rack M340 - 4 slots - panel, plate or
DIN rail mounting
Main
Range of product
Modicon M340 automation platform
Accessory / separate part type
Ruggedized rack
Product specific application
For severe environments
Complementary
Number of slots
4 bus X
Product compatibility
BMXCPS power supply
I/O module
BMXP34 processor
Specific application module
Power consumption in W
1W
Electrical connection
1 connector (XBE) expansion module
Fixing mode
By 4 M6 screws plate
By clips 35 mm symmetrical DIN rail
By 4 screws 4.32...6.35 mm panel
Product weight
0.63 kg
Environment
IP degree of protection
IP20
Ambient air temperature for operation
-25...70 °C
Relative humidity
10...95 % without condensation
Protective treatment
TC
Conformal coating Humiseal 1A33
Environmental characteristic
3C3 conforming to EN/IEC 60721-3-3
3C4 conforming to EN/IEC 60721-3-3
Offer Sustainability
Sustainable offer status
Green Premium product
RoHS (date code: YYWW)
Compliant - since 0612 - Schneider Electric declaration of conformity
Jul 26, 2017
1
Schneider Electric declaration of conformity
REACh
Reference not containing SVHC above the threshold
Reference not containing SVHC above the threshold
Product environmental profile
Available
Product environmental
Product end of life instructions
Available
End of life manual
Contractual warranty
Warranty period
2
18 months
Product data sheet
Dimensions Drawings
BMXXBP0400H
Dimensions
3
Product data sheet
Mounting and Clearance
Rack Installation in a Cabinet
Minimum Clearance
a Greater than or equal to 60 mm (2.36 in.)
b Greater than or equal to 80 mm (3.15 in.)
1 Installation or casing
2 Wiring duct or tray
4
BMXXBP0400H
BMXXBP0400H
Product data sheet
Mounting and Clearance
Mounting and Fastening the Racks
Mounting on 35 mm (1.38 in.) Wide and 15 mm (0.59 in.) Deep DIN Rails with Four HM6 Screws
Mounting on Panels
Dimensions in mm / in.
(1) The diameter of the fastening holes must allow use of M4, M5, M6 and UNC #6 screws.
Rack
a
b
Size of the rack and extension module
BMXXBP040 and BMXXBP0400H
207.8 mm (8.187 in.)
242.2 mm (9.543 in.)
243.4 mm (9.59 in.)
BMXXBP0600 and BMXXBP0600H
273 mm (10.756 in.)
307.6 mm (12.12 in.)
308.8 mm (12.167 in.)
BMXXBP0800 and BMXXBP0800H
338.2 mm (13.325 in.)
372.8 mm (14.69 in.)
374 mm (14.736 in.)
BMXXBP1200 and BMXXBP1200H
468.6 mm (18.463 in.)
503.2 mm (19.826 in.)
504.4 mm (19.873 in.)
Mounting on Telequick AM1-PA and AM3-PA Mounting Grids
Fasten the rack with four M4, M5, M6 or UNC #6 screws.
5