Compact joystick operator terminal

cJoy OT
Compact Joystick Operator Terminal
The cJoy Operator Terminal serves as
the main operator interface for the cJoy
Compact Joystick system.
It can also be used as an additional joystick
terminal for the cPos and SDP range of DP
systems.
The terminal provides an intuitive and
user-friendly tool for joystick, station
keeping and autopilot operation.
Features
• 3-axis joystick to control surge, sway and yaw
thruster demand
• Heading wheel for heading demand input
• 6.5” high-resolution colour display
• Display page manoeuvring buttons
• Operational mode buttons with indicator lights and
double-push action
• Quick access buttons for system functions
• Functions for command request/transfer between
operator locations
• Selection of joystick/automatic axis control
• Selection of joystick thrust
• Selection of rotation centre
• Selection of wind compensation in joystick mode
• Change heading and position selection
• Joystick calibration function
• Dedicated alarm page
• Alarm indicator/buzzer with silence button
• Power indicator with power failure alarm.
• Panel and display illumination adjustment
• Automatic detection of panel location and orientation
from junction box
• Panel test function.
• Joystick calibration function
Description
The cJoy Operator Terminal provides the operator
with all necessary facilities to control a vessel in
joystick and autopilot mode as well as for station
keeping.
The operator panel is ergonomically designed so that
the operator can easily make the necessary adjustments
and give control commands.
The computer and all electronics are housed in a selfcontained desk/console mountable unit.
The terminal communicates with the cJoy Controller
and other cJoy Operator Terminals via LAN. Up to six
cJoy Wing Terminals can be connected to one cJoy
Operator Terminal.
The connection between the terminal and the controller
is established via a junction box. The junction
box connector is coded to enable the terminal to
automatically adjust display views and joystick axes
according to the orientation of the operator position.
Kongsberg Maritime reserves the right to make changes to the material or product described, at any time without notice.
177186C
Technical Specications
Standards Applied
The equipment is designed to conform to the following
standards:
• EN 50081-2 Electromagnetic compatibility - Generic
emission standard, Part 2: Industrial environment
• EN 50082-2 Electromagnetic compatibility - Generic
immunity standard, Part 2: Industrial environment
• EN 60204 Safety of machinery - Electrical equipment
of machines, Part 1: General requirements
• EN 60945 Marine navigation and radio
communication equipment and systems - General
requirements: Methods of testing and required tests
• IACS E10 Unied environmental test specication
for testing procedures for electrical, control and
instrumentation equipment, marine computers and
peripherals covered by classication
CE Marking
The equipment conforms to the relevant EU
directives.
Type Approval
The cJoy Operator Terminal is designed for type
approval by:
• Det norske Veritas (DnV)
• The American Bureau of Shipping (ABS)
Dimensions
Height:
260 mm
Width:
583 mm
Depth:
180 mm
Weight:
6 kg
Environmental Specications
Note:
Exposing the electronics to the limits of its
environmental specication will affect the equipment’s
expected lifetime.
Ambient temperature
operational:
-15° C to 55° C
storage:
-20 °C to 60° C
Ambient humidity
operational:
storage:
Acoustic noise
40% to 90% relative humidity,
non condensing
less than 95% relative humidity,
non-condensing
<40 dB
Cabinet Specication
Material:
aluminium
Protection standard: IP44 when built-in
Colour:
grey, NCS S 6500-N
Interfaces
The cJoy Operator Terminal can be interfaced to up to
six cJoy Wing Terminals via a CAN bus interface.
The interface to the cJoy Controller Unit and other
cJoy Operator Terminals or cPos Operator Stations is
via a LAN.
Article Numbers
cJoy Operator Terminal
cJoy Operator Terminal Junction Box
with cable
603201
603202
KONGSBERG MAR I T IME AS
P.O. Box 483, N-3601 Kongsberg, Norway
Telephone +47 32 28 50 00
Electrical
Input voltage:
24 VDC (+10%, -15%)
Power consumption: maximum 30 W
typical 20W
Telefax +47 32 28 50 13
e-mail: km.sales@kongsberg.com, www.kongsberg.com